Scribd
Upload
59 views1 page

Engine Installation Check List

The document is an engine installation checklist that outlines various systems to be inspected, including the cooling, air induction, exhaust, electric, fuel, and oil systems. Each system has specific checks and requirements, with a section for recording the condition and remarks. The checklist concludes with spaces for customer and inspector signatures to confirm the inspection has been performed.

Uploaded by

Iwan Yulianto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
59 views1 page

Engine Installation Check List

The document is an engine installation checklist that outlines various systems to be inspected, including the cooling, air induction, exhaust, electric, fuel, and oil systems. Each system has specific checks and requirements, with a section for recording the condition and remarks. The checklist concludes with spaces for customer and inspector signatures to confirm the inspection has been performed.

Uploaded by

Iwan Yulianto
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ENGINE INSTALLATION CHECK LIST

F-RC-T&S-57

Job No :____________________________ Engine Model :____________________________


Customer :____________________________ ESN :____________________________
Machine Aplication :____________________________ Machine OEM :____________________________
Date In Service :____________________________ Hours Meter Reading :____________________________

Condition
Checked Required Remarks
Good Bad
Cooling System :
- Check and repair radiator as neccesarry
- Inspect hose clamps and piping
- Check ACP ( Active Cooling System Pressurization )
pressure regulator, check regulator, check valve and
relief valve for proper adjustment and operation
- Inspect fan for crack and / or damage
- Inspect fan shroud for adjustment and damage

Air Induction System :


- Check air cleaner, housing and seals for damage
- Replace air cleaner elements
- Check air piping for Holes damage elbow and connectors,
loose or broken hose clamps, corroded piping under
rubber elbows and connectors and tubing rubbing against
other vehicle components.
- Check air restriction gauge for condition and operation,
Maximum restriction specification :
Clear air filter element, 380 mm H20 ( 15 in. H20 )
Dirty air filter elements, 635 mm H20 ( 25 in. H20 )

Exhaust System :
- Check exhaust piping for holes, dentx, breaks and tubing
rubbing against other vehicle components.
- Check exhaust restriction at full load and speed

Electric System :
- Check batteries, battery cable, and connections for condition
- Check charging altenator and cables for condition and operation
- Check engine earthing cables for condition
- Check instrument panel ( indicator lamps, gauges, switchs )
- Check wiring harness's for condition

Fuel System :
- Check fuel line supply from tank to engine fuel return
line from tank. Make sure all valves in the line are
working properly.
- Check fuel tank, it must be clean, free of dirt and water.

Oil System :
- Check oil level
- Check all refill plugs are tight
- Check all drain plugs are tight
- Check all filters are tight

Others
- Check engine mount capscrew torque
- Check transmision/propulsion altenator capscrew torque
- Check cranckshaft and flost recorder : ________________

Remarks :

THE INSPECTION HAS BEEN PERFORMED AND THE CUSTOMER OR HIS PRESENTATIVE HAS BEEN INSTRUCTED AS LISTED ABOVE
CUSTOMER SIGNATURE & STAMP
INSPECTION CARRIED OUT BY : CUSTOMER SIGNATURE & STAMP
DATE :

SIGNATURE :

DATE : ( _____________________________________________ )

You might also like