Made with Xodo PDF Reader and Editor
COCO
Pattern by Bilgenur Çamtosun
This pattern is for personal use only. It may not be
shared, copied, distributed and sold. You can sell your
finished works made from this pattern. My rights on my
pattern are protected by The Law on Intellectual and
Artistic Works of Republic of Turkey and by
International Copyright Law.
September 2024
Made with Xodo PDF Reader and Editor
Coco Doll About
Thank you very much for liking and purchasing my pattern 🤗
The finished toy if similar materials are used will be
approximately 16 cm tall.
The size will vary depending on the thickness of your yarn. If
you use thicker yarn, the toy will be larger, and if you use
thinner yarn, the toy will be smaller.
You can crochet with different brands of yarn.
The only thing you need to pay attention to is that the yarns
you use are of the same brand or the same thickness.
Coco Doll is crocheted using the "x" stitch (yarn under)
technique.
Notes:
- 2ch and 1ch at the beginning of the round are not included
in the number of stitches.
- Slip stitches at the end of the round are not included in the
total number of stitches.
I hope you will enjoy crocheting this cute doll, which I
prepared with love, pleasure and ease.
If you have any questions about the pattern, you can contact
me on Instagram.
dunyanin_amigurumisi
Made with Xodo PDF Reader and Editor
Materials
Gazzal baby cotton 3436 (brown)
Gazzal baby cotton 3429 (light blue)
Gazzal baby cotton 3431 (dark blue)
Gazzal baby cotton 3432 (white)
Gazzal baby cotton 3443 (red)
Gazzal baby cotton 3433 (black)
Gazzal baby cotton 3424 (beige skin color)
10 mm black color safety eyes
Plastic insert for the sole of the foot
18 cm long electrical wire
2.00mm crochet hook
Fiberfill
Abbreviations
Mr : Magic ring :
w 3 sc in the same stitch
ch : Chain dc : Double crochet
sc : Single crochet inc-dc : Double crochet increase
inc : increase hdc : Half double crochet
dec : decrease inc-hdc : Half double crochet increase
slst : Slip stitch FLO : Front loop only
stc: stitch BLO : Back loop only
Made with Xodo PDF Reader and Editor
Arms
Using skin color (beige)
1. Mr 6sc
isi
2. (sc, inc) * 3 = 9
3. (2sc, inc) * 3 = 12
m
4. 12sc
5. (4sc, dec) * 2 = 10
ru
6. (3sc, dec) * 2 = 8
7-16. 8sc (10 rounds)
igu
17. Crochet loops together 3sc
Don't stuff arms.
Cut the yarn.
am
Leg(left)
Using brown color
in_
6 ch, from the second chain on the hook
1. inc, 3sc, 4sc in the same stitch, 3sc, inc = 14
2. inc, 4sc, 4inc, 4sc, inc = 20
an
3. sc, inc, 5sc, (inc, sc) * 4, 4sc, inc = 26
4. BLO 26sc
ny
5-6. 26sc (2 rounds)
Before moving on to the decreases, cut plastic in the shape of
the sole of the foot and place it on the sole of the foot.
du
@
Made with Xodo PDF Reader and Editor
7. 7sc, 6dec, 7sc = 20
8. 4sc, 6dec, 4sc = 14
Change color to light blue
9. BLO 14sc
isi
10. 2sc, inc, 3sc, inc, 2sc, inc, 3sc inc = 18
11-12. 18sc (2 rounds)
m
Change color to dark blue
13. BLO 18sc
ru
14-17. 18sc (4 rounds)
18. 14sc (stitch ends in the mid part at
igu
side view of leg)
Cut the yarn.
am
Details of the leg
Attach the light blue color to the place where we made the BLO
part in the round 13 while crocheting the leg.
in_
1-4. 1 ch, 18sc, slst = 18 (4 rounds)
an
Fold it back as in the photo.
ny
du
@
Made with Xodo PDF Reader and Editor
Leg (right)
We crochet the right leg in the same way until round 17
18. 18sc
Do not cut the yarn and continue crocheting using this yarn for
isi
joining the legs
m
Body
ru
19. 5sc on the right leg, make 3 chains, 18sc starting from the last
stitch on the left leg, 3sc on the chains, 18sc on the right leg, 3sc
on the chains (42)
igu
Put the stitch marker here .
am
in_
an
20-23. 42sc (4 rounds)
24. (5sc, dec) * 6 = 36
ny
Change color to white color
25. BLO 36sc
26. (4sc, dec) * 6 = 30
du
27-35. 30sc (9 rounds)
We'll add the arms to the body.
@
36. 6sc from the body, sc in the next 3 stitches of both the arm and
the body, 12sc from the body, sc in the next 3 stitches of both the
arm and the body, 6sc from the body = 30
Made with Xodo PDF Reader and Editor
isi
m
37. (3sc, dec) * 6 = 24
ru
38. (2sc, dec) * 6 = 18
39. (sc, dec) * 6 = 12
Change color to skin color
40. BLO 12sc
41-42. 12sc (2 rounds)
igu
am
43. (2sc, dec) * 3 = 9
44-53. 9sc (10 rounds)
At this stage, bend the electrical wire as in the photo and
in_
place it on the neck.
54. (sc, dec) * 3 = 6
Cut the yarn.
an
ny
du
@
Made with Xodo PDF Reader and Editor
Head
1. Mr 8sc
2. 8inc = 16
3. (sc, inc) * 8 = 24
4. sc, inc, (2sc, inc) * 7, sc = 32
isi
5. (3sc, inc) * 8 = 40
m
6. 2sc, inc, (4sc, inc) * 7, 2sc = 48
7. (7sc, inc) * 6 = 54
ru
8. 4sc, inc, (8sc, inc) * 5, 4sc = 60
9-17. 60sc (9 rounds)
18. 24sc, 2 ch, skip 2 stitches, 8sc, 2 ch, skip 2 stitches, 24sc = 60
sc) * 3, 18sc = 66
20-24. 66sc (5 rounds)
igu
19. 18sc, (sc, inc) * 3, 2sc on the chains, 8sc, 2sc on the chains, (inc,
am
Insert the eyes to the holes we made in round 18
in_
an
ny
25. (9sc, dec) * 6 = 60
26. 4sc, dec, (8sc, dec) * 5, 4sc = 54
du
27 . (7sc, dec) * 6 = 48
28. 2sc, dec, (4sc, dec) * 7, 2sc = 40
29. (3sc, dec) * 8 = 32
@
30. sc, dec, (2sc, dec) * 7, sc = 24
31. (2sc, dec) * 6 = 18
32. (4sc, dec) * 3 = 15
33-41. 15sc (9 rounds)
Leave a long tail for sewing and cut the yarn.
Made with Xodo PDF Reader and Editor
isi
m
ru
stuff your head tightly, fasten off.
igu
Push the neck part into the head.
Details of the head
am
For the eye area (make 2) For nose
Using black color Using black color
in_
22 ch, slst to the first stitch Mr (2 ch, 1dc, 2ch,1 slst) * 2
(inc, 10sc) * 2 = 24 Leave a long tail for sewing
Leave a long tail for sewing and cut the yarn.
an
and cut the yarn.
ny
du
@
Sew the pieces to the head, following the steps in the
photo. Do the mouth embroidery.
Made with Xodo PDF Reader and Editor
isi
m
ru
igu
am
in_
Jacket
While crocheting the jacket, turn at the end of each round.
Start with chain to next round.
an
19 ch, from the second chain on the hook
1. sc, inc, (2sc, inc) * 5, sc = 24
2. sc, inc, (3sc, inc) * 5, 2sc = 30
ny
3. 2sc, inc, (4sc, inc) * 5, 2sc = 36
4. 2sc, inc, (5sc, inc) * 5, 3sc = 42
du
5. sc, inc, 3sc, 5ch, skip 9 stc, 14sc, 5ch, skip 9 stc, 3sc, inc, sc = 36
@
Made with Xodo PDF Reader and Editor
6. sc, inc, 4sc, on the chains 5sc, 14sc, on the chains 5sc, 4sc, inc, sc =38
7-10. 38sc (4 rounds)
11. sc, inc, 34sc, inc, sc = 40
12-14. 40sc (3 rounds)
Do not cut the yarn and continue to crochet around the edge using this
yarn. Cut the yarn.
isi
m
Sc around
ru
igu
am
Sleeves
in_
While crocheting the sleeves, we'll make slst, a ch and turn the
work at the end of each round.
an
Keep the jacket as in the photo. Attach the yarn into the middle stitch.
ny
1. 3sc under the arm,
1sc from the side of the arm,
9sc on the top of the arm,
du
1sc from the side of the arm,
2sc under the arm = 16
2-9. 16sc (8 rounds)
@
Cut the yarn.
ng
inni
Beg
Made with Xodo PDF Reader and Editor
Using white color
make 13 ch
Sew on the sleeves of the jacket.
isi
m
ru
Hood igu
am
1. Mr 6sc
2. 6inc = 12
in_
3. (sc, inc) * 6 = 18
4. sc, inc, (2sc, inc) * 5, sc = 24
5. (3sc, inc) * 6 = 30
an
6. 2sc, inc, (4sc, inc) * 5, 2sc = 36
7. (5sc, inc) * 6 = 42
8. 3sc, inc, (6sc, inc) * 5, 3sc = 48
ny
9. (7sc, inc) * 6 = 54
10. 4sc, inc, (8sc, inc) * 5, 4sc = 60
du
11. (9sc, inc) * 6 = 66
12. 5sc, inc, (10sc, inc) *5, 5sc = 72
13-17. 72sc (5 rounds)
@
18. Turn, 64sc
19-25. Turn, 64sc (7 rounds)
Leave a long tail for sewing and cut the yarn.
Made with Xodo PDF Reader and Editor
isi
m
ru
igu
Sew the hood to the jacket.
am
Sew
in_
Sew
an
ny
du
@
Made with Xodo PDF Reader and Editor
Hair
1. Mr 8sc, slst
2. 2 Ch, 8inc-dc, slst = 16
3. 2 Ch, 16inc-dc , slst = 32
isi
4. 2 Ch, (1dc, 1inc-dc ) * 16, slst = 48
m
Do not cut the yarn and continue crochet the hair strands.
(10ch from the third chain on the hook 8hdc, skip 1stc and
ru
slst to the next stc on the wig) * 6
Leave a long tail for sewing and cut the yarn.
igu
am
in_
Sew the reverse side of the hair wig to the head.
an
Sew the hair, following the steps in the photo.
ny
du
@
Made with Xodo PDF Reader and Editor
If you wish, you can make shapes on her face with a marker
pen, as in the photo.
isi
m
ru
igu
am
in_
an
Insert the neck into the head.
ny
du
@
Made with Xodo PDF Reader and Editor
Guitar
Make 2 pieces
11 ch, from the second chain on the hook
isi
1. inc, 8sc, inc, turn = 12
2. 1 ch, 12 sc, turn = 12
m
3. 1 ch, inc, 10sc, inc, turn = 14
4-7. 1 ch, 14sc, turn (4 rounds)
ru
8. 1 ch, skip 1stc, 11sc, skip 1stc, 1sc turn = 12
9. 1 ch, skip 1stc, 9sc, skip 1stc, 1sc, turn = 10
igu
10. 1 ch, skip 1stc, 7sc, skip 1stc, 1sc, turn = 8
11. 1 ch, inc, 6sc, inc, turn = 10
12. 1 ch, inc, 8sc, inc, turn = 12
am
13-15. 1 ch, 12sc, turn (3 rounds)
16. 1 ch, skip 1stc, 9sc, skip 1stc, 1sc, turn = 10
17. 1 ch, skip 1stc, 7sc, skip 1 stitch, 1sc = 8
in_
Crochet the second part in the same way. Don’t cut the yarn. Start
making single crochet from the edges.
an
ny
du
@
Made with Xodo PDF Reader and Editor
Guitar handle
6 ch from chain 5th
1. inc, 3sc, w, 4sc = 12
isi
2-6. 12sc (5 rounds)
7. (dec, 4sc) * 2 = 10
m
8-26. 10sc (19 rounds)
ru
Leave a long tail for sewing and
cut the yarn.
igu
Sound hole
Using black colour
am
1. Mr 7sc
2. 7inc = 14
Leave a long tail for sewing and cut
in_
the yarn.
an
As you can see in the picture, place and sew all the pieces.
Make the strings of the guitar with black yarn, following the
steps in the photos.
ny
du
@
Made with Xodo PDF Reader and Editor
Congratulations 🎊
You've done making
Coco
Please tag me @dunyanin_amigurumisi 🤗
so I can see your works using my pattern.
