Scribd
Upload
191 views1 page

Pre Start Checklist

The document is an Excavator Pre-Inspection Checklist that outlines necessary inspections and operational checks for excavators. It includes sections for walk-around inspections, operational checks, and reminders for operators. Additionally, it provides spaces for actions required and taken, along with signatures for the operator and inspector.

Uploaded by

psudhakarp6
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
191 views1 page

Pre Start Checklist

The document is an Excavator Pre-Inspection Checklist that outlines necessary inspections and operational checks for excavators. It includes sections for walk-around inspections, operational checks, and reminders for operators. Additionally, it provides spaces for actions required and taken, along with signatures for the operator and inspector.

Uploaded by

psudhakarp6
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Excavator Pre-Inspection Checklist

Site Location
Plate: No:

Model No.

Operator:
Hours/Km

Walk around Inspection - Mark ALL boxes (N/A if does not apply)
Check Y/N Check Y/N
Hydraulic Cylinders (lub. & Checked) Transmission Oil
Hydraulics (no leaks or damage) Coolant levels & leaks
Quick Hitch & pins (functional) Hydraulic Oil
Seat & Seat Belt (functional) Stew Gear Gearbox Oil
Safety Bar Rotating Beacon
FOPS & side mesh Battery (brackets, terminals & levels)
Track Chain & Plates (tension, damage) Clean Windows
Fluid leaks Attachments (check for damage)
Engine Oil Level Warning Decals

Operational Check - Mark ALL boxes (N/A if does not apply)


Check Y/N Check Y/N
Steering System (steers well) Gauges (operating correctly)
Park Brake (holds on incline) Hand Controls (operate correctly)
Quick Hitch Lights
Creep (non when controls in neutral) Cab Interior (clean, tidy)
Hydraulic Lockout Slew (full travel, smooth operation)
Foot Pedals (operate correctly Boom Arm (extends to full travel
Ground Engaging Tools Dipper Arm (tilts & crowds to full travel)
Precleaner (clean) Foot Pedals (operate correctly)
Horn & Reverse Alarm Auxilary Hydraulics

Remember to:
1. Conduct a 'walk around' inspecion of the machine after each scheduled break
2. Check that brakes and steering are operating correctly when you first start moving
3. Keep the cab and access ways clear of all obstruction
4. Use signals when starting from a parked position
5. Ensure seat belt is correctly fastened and seat is correctly adjusted

Actions required: Actions Taken:

Operators Signature

Inspector Signature Date: / /

You might also like