Excavator Pre-Start
Inspection Checklist
& Defect Report
Date:
Job # __________________________________________
Unit # ____________________________________________
Operator:
Hours:
Walk around Inspection - Mark ALL boxes (N/A if does not apply)
Check Y/N Check Y/N
Hydraulic Cylinders (lub. & Checked) Transmission Oil
Hydraulics (no leaks or damage) Coolant levels & leaks
Quick Hitch & pins (functional) Hydraulic Oil
Seat & Seat Belt (functional) Stew Gear Gearbox Oil
Safety Bar Rotating Beacon
FOPS & side mesh Battery (brackets, terminals & levels)
Track Chain & Plates (tension, damage) Clean Windows
Fluid leaks Attachments (check for damage)
Engine Oil Level Warning Decals
Operational Check - Mark ALL boxes (N/A if does not apply)
Check Y/N Check Y/N
Steering System (steers well) Gauges (operating correctly)
Park Brake (holds on incline) Hand Controls (operate correctly)
Quick Hitch Lights
Creep (non when controls in neutral) Cab Interior (clean, tidy)
Hydraulic Lockout Slew (full travel, smooth operation)
Foot Pedals (operate correctly Boom Arm (extends to full travel
Ground Engaging Tools Dipper Arm (tilts & crowds to full travel)
Precleaner (clean) Foot Pedals (operate correctly)
Horn & Reverse Alarm Auxilary Hydraulics
Remember to:
1. Conduct a 'walk around' inspecion of the machine after each scheduled break
2. Check that brakes and steering are operating correctly when you first start moving
3. Keep the cab and access ways clear of all obstruction
4. Use signals when starting from a parked position
5. Ensure seat belt is correctly fastened and seat is correctly adjusted
Actions required: Actions Taken:
Operators Signature: Date: / /
