HILTON AHSA HOTEL

Guestrooms & Public Areas

FF&E Specifications

Date: 21 May 2024

Revision: 00
HILTON AHSA

Seating Specifications
DN DESIGNS

FF&E SPECIFICATIONS SE-101

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area - Lobby Revision Number 00

SPECIFICATION / FF&E

Product Name Compomarzio

Product Model 02
Dimensions L 2500 cm x D 110cm x W 240 xH 105 cm
Finishes Seat and back upholstered with wooden
legs
Description: It sets personality and character at the
centre

SUPPLIER
Name As per the vendor list
Address -
Contact

SHOP DRAWING FABRIC FB-101 CUSHIONS

CSH-05 CSH-03

FABRIC WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-102

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area - Lobby Revision Number 00

SPECIFICATION / FF&E

Product Name Chloe sofa

Product Model 25207772
Dimensions W: 280 cm D: 100 cm H: 75.5 cm
Finishes Seat and back upholstered with metal
legs
Description: It expresses a softly feminine comfort
and sensual elegance

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-104 CUSHIONS

CSH-03

FABRIC FB- METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-103

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area - Lobby Revision Number 00

SPECIFICATION / FF&E

Product Name OSLO

Product Model 816366
Dimensions W 280 cm x D95cm x H75cm, SH 40cm
Seat and back upholstered with wooden
legs
Finishes

Description: This sofa is a perfect blend of style and

functionality

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-105 CUSHIONS

CSH-04

FABRIC WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-104

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area - Lobby Revision Number 00

SPECIFICATION / FF&E

Product Name Reeves small

Product Model Fixed
Dimensions W66 x D75 cm x H68cm
Finishes Seat and back upholstered and wooden
legs with metal back support
Description: The armchair with the sophisticated
constructive details that set the entire
Reeves collection apart

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-102 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-105

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area - Lobby Revision Number 00

SPECIFICATION / FF&E

Product Name The cuff sofa

Product Model 1612795036
Dimensions W 215 x D 100 X H 71
Finishes Seat and back upholstered with
wooden legs
Description: The essence of French style is captured
in this sofa. Clean and classic elements
such as a tufted back give this beautiful
silhouette a sophisticated sensibility

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-101 CUSHIONS

CSH-01

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-106

Project Name Hilton Ahsa Item Name Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area - Lobby Revision Number 00

SPECIFICATION / FF&E

Product Name Peregrine Chair

Product Model 485-00
Dimensions 76 W x 82.5 D x 72.5 cm H SH 46 cm
Finishes Seat and back upholstered with
wooden legs
Description: This graceful chair includes curving
arms which create the illusion of wings.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-105 CUSHIONS

CSH-02

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-107

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area - Lobby Revision Number 00

SPECIFICATION / FF&E

Product Name Brigid

Product Model 255
Dimensions 74 W x 84 D x 75H SH 42 cm
Finishes Seat and back upholstered with wood
legs
Description: Aesthetic and function in perfect
harmony, the Brigid armchair brings a
sense of relaxation to the living space

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-101 CUSHIONS

FABRIC FB- METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-108

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area – Lobby Revision Number 00

SPECIFICATION / FF&E

Product Name PI Chair

Product Model 21933
Dimensions H: 81.5 W: 86.5 D: 67.5
Finishes Seat and back upholstered with
wooden legs and back
Description: A remix of a traditional circular lounge
chair, this oval beauty presents a flared
back of padded fins

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-104 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-109

Project Name Hilton Ahsa Item Name Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area – Lobby Revision Number 00

SPECIFICATION / FF&E

Product Name Reeves small

Product Model Fixed
Dimensions W66 x D75 cm x H68cm
Finishes Seat and back upholstered and wooden
legs with metal back support
Description: The armchair with the sophisticated
constructive details that set the entire
Reeves collection apart

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-101 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-110

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area – Lobby Revision Number 00

SPECIFICATION / FF&E

Product Name Apricot

Product Model 220016
Dimensions W280 x D95 cm x H75 cm
Finishes Seat and back upholstered with
wooden legs
Description: The shape takes up vintage lines,
modernising them with an incredibly
sophisticated silhouette

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-105 CUSHIONS

CSH-01

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-112

Project Name Hilton Ahsa Item Name High Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area – Lobby Revision Number 00

SPECIFICATION / FF&E

Product Name Modern Gray

Product Model J04XXJ000005GR
Dimensions 48 x 48 H: 1060 SH: 74 mm
Finishes Seat and back upholstered with metal
legs
Description: For a more comfortable sitting posture,
lean on the bar chairs' backs and rest
your feet on the footrest after a long
day of sitting

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-105 CUSHIONS

FABRIC FB- METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-113

Project Name Hilton Ahsa Item Name Ergonomic chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area – Lobby Revision Number 00

SPECIFICATION / FF&E

Product Name White

Product Model 5011188
Dimensions 69 W x 66 D x 104 cm H
Finishes Seat and back upholstered with metal
legs
Description: The functional characteristics of the
chair are inconspicuous: the
mechanism disappears under the seat
and the armrests form an integral part
of the backrest.
SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-105 CUSHIONS

FABRIC FB-

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-114

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area – Lobby Revision Number 00

SPECIFICATION / FF&E

Product Name Montedoro Lounge

Product Model MTD10
Dimensions H: 81.5 W: 75 D: 70
Finishes Seat and back upholstered with
wooden legs and arms
Description: Refined style and a high level of
cleanability make Montedoro the right
selection for wait spaces and other
common areas.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-102 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-201

Project Name Hilton Ahsa Item Name Dining Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area – All day dining Revision Number 00

SPECIFICATION / FF&E

Product Name Concha

Product Model 905/P
Dimensions 570 x 600 H: 830 mm SH: 46 mm
Finishes Seat and back upholstered with wooden
legs
Description: Its essential shape aims at the highest
versatility and makes it suitable for both
domestic and contract environments

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-202 CUSHIONS

FABRIC FB-201 WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-202

Project Name Hilton Ahsa Item Name Dining Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area – All day dining Revision Number 00

SPECIFICATION / FF&E

Product Name Crete

Product Model FUP110012ABM
Dimensions W: 60.5 D: 56.4 H 91 SH: 45 cm
Finishes Seat and back upholstered with
wooden legs
Description: Fusing solid wood, sumptuous velvet
and exquisite brass details, our
beautifully crafted CRETE dining chair
draws on Modernist influences for its
timeless design.
SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-203 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-203

Project Name Hilton Ahsa Item Name Dining Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area – Dining Chair Revision Number 00

SPECIFICATION / FF&E

Product Name Frederik armchair

Product Model DC17201
Dimensions 70 W x 70 D x 50 cm H, 46 cm SH
Finishes Seat and back upholstered with
wooden legs and back

Description: Enjoy a stable seat and solid support

with no rotation needed.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-204 CUSHIONS

CSH-08

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-204

Project Name Hilton Ahsa Item Name Dining Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area – Able Butcher Revision Number 00

SPECIFICATION / FF&E

Product Name Manille Armchair

Product Model 1841
Dimensions 55 W x 54 D x 76 cm H 49 SH
Finishes Seat and back upholstered with
wooden legs

Description: It is a luxury seating collection designed

to meet the different needs of day-to-
day living

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-206 CUSHIONS

FABRIC FB-

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-205

Project Name Hilton Ahsa Item Name Dining Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area – Able Butcher Revision Number 00

SPECIFICATION / FF&E

Product Name Kai Kristiansen chair

Product Model sku61250827
Dimensions 54 W x 46 D x 74 cm H 46 SH
Finishes Seat and back upholstered with
wooden legs and back

Description: The chair has typical light and elegant

design that make it fit in easily where
you want them in your space.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-205 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-206

Project Name Hilton Ahsa Item Name Dining Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area – Able Butcher Revision Number 00

SPECIFICATION / FF&E

Product Name Lucien Dining Chair

Product Model 1707238550
Dimensions 47 W x 47 D x 77cm H SH:46 cm
Finishes Seat and back upholstered with
wooden legs and back support

Description: This piece is a true statement piece

that captures a classic yet timeless
elegance.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-205 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-207

Project Name Hilton Ahsa Item Name Dining Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area – Able Butcher outdoor Revision Number 00

SPECIFICATION / FF&E

Product Name Malta

Product Model 18660017
Dimensions 54 W x 46 D x 74 cm H 46 SH
Finishes Seat upholstered with wooden legs and
back

Description: The Malta chair is a transitional and

unique statement of comfort with
clean geometric lines..

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-205 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-208

Project Name Hilton Ahsa Item Name Dining Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public area – Able Butcher outdoor Revision Number 00

SPECIFICATION / FF&E

Product Name BOHO

Product Model LISA007
Dimensions W47.5×D46×H79CM SH 47
Finishes Seat upholstered with wooden legs and
rattan back

Description: The chair is sturdy and comfortable,

making it well-suited for relaxed
dinners or more formal occasions.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-207 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-301

Project Name Hilton Ahsa Item Name Armchair in treatment room
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Spa Revision Number 00

SPECIFICATION / FF&E

Product Name Caracole

Product Model UPH-CHAWOO-61A
Dimensions H. 74.5 × W.72.5 × D.88.5 cm SH 42 cm
Finishes Seat and back upholstered with
wooden frame and legs
Description: The perfect accent chair can turn a
standard space into a truly spectacular
one in a matter of minutes

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-301 CUSHIONS

CSH-20 CSH-21

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-302

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Spa Revision Number 00

SPECIFICATION / FF&E

Product Name Emma Armchair

Product Model b5003-2703-044
Dimensions W 85cm x D 80cm x H 81cm
Finishes Seat upholstered with brushed brass
finish swivel base
Description: Refined nailhead trim lines the low-
profile barrel back and wings. Diamond
stitching is another classic touch, while
the exposed saber legs are distinctly
modern.
SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-303 CUSHIONS

CSH-20

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-303

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Spa Revision Number 00

SPECIFICATION / FF&E

Product Name Aria Armchair

Product Model 0000077321_1
Dimensions H. 79 × W. 97 × D. 83 cm
Finishes Seat and back upholstered with
wooden legs
Description: The seat rests on an elegant solid oak
structure with stained open-pore Moka
finish. The Leslie sofa’s feet are in
Pewter-color cast aluminum.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-302 CUSHIONS

CSH-20 CSH-21

FABRIC WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-304

Project Name Hilton Ahsa Item Name Ergonomic chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Spa Revision Number 00

SPECIFICATION / FF&E

Product Name Franco Bianchini

Product Model FRCBVR-076
Dimensions W 74 x D 67 x H 131
Finishes Seat and back upholstered with
wooden legs
Description: Swivel and height-adjustable chair with
lacquered base and entirely
upholstered in leather with quilting on
the back.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-301 CUSHIONS

FABRIC FB-

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-305

Project Name Hilton Ahsa Item Name Chair
Project Number WGR23 Issue Date 21 May 2024
Package Name Public areas – Spa Revision Number 00

SPECIFICATION / FF&E

Product Name Gatsby II

Product Model MR-GATS-DIN-002-001
Dimensions W 60 x D 61 x H 81
Finishes Seat and back upholstered with metal
legs
Description: A refined chair with a bold, enveloping
character. An original combination of
straight and curved lines, which come
together to define an essential, yet
highly distinctive shape.
SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-301 CUSHIONS

FABRIC FB- METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-306

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Spa Revision Number 00

SPECIFICATION / FF&E

Product Name Cosmo

Product Model 75 f
Dimensions W 86 x D 70 x H 70
Finishes Seat and back upholstered with metal
legs

Description: Sculptural and classy, the Cosmo

armchair is perfect for stunning spaces.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-303 CUSHIONS

CSH-20

FABRIC FB- METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-307

Project Name Hilton Ahsa Item Name Bar Stool
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Spa Revision Number 00

SPECIFICATION / FF&E

Product Name Arabesque

Product Model 1200
Dimensions W45 x D45 x H107
Finishes Seat upholstered with engraved
wooden back

Description: Sculptural and classy, the Cosmo

armchair is perfect for stunning spaces.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-303 CUSHIONS

CSH-10

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-308

Project Name Hilton Ahsa Item Name Bench in changing room
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Spa Revision Number 00

SPECIFICATION / FF&E

Product Name Barcelona

Product Model 1687837920
Dimensions W 120 cm x D 42 cm x H 43 cm
Finishes Seat upholstered with wooden legs

Description: The perfect addition to elevate any

space with a touch of elegance and
sophistication.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-301 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-309

Project Name Hilton Ahsa Item Name Chaise lounge
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Spa Revision Number 00

SPECIFICATION / FF&E

Product Name Sun bed Santorini

Product Model 04e137c
Dimensions W 74 x L 206 x H 25cm Cushions H 8cm
Finishes FSC certified A grade solid teak wood,
high-quality PE rattan, foam core,
fabric

Description: It is designed to be the ultimate

outdoor relaxation experience

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-301 CUSHIONS

CSH-20 CSH-21

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-310

Project Name Hilton Ahsa Item Name Daybed
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Spa Revision Number 00

SPECIFICATION / FF&E

Product Name Point

Product Model 78796
Dimensions W 86 x D 70 x H 70
Finishes Powder-coated aluminum overlaid
with polyester rope weaving.
All these lounge and deep seating
Description: pieces have a powder-coated
aluminium structure and characteristic
rope weave.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-301 CUSHIONS

CSH-20 CSH-21

FABRIC FB- FRAME

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-401

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Executive lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Wellington

Product Model INOX5
Dimensions 300W x 102 D x 72H Sh: 42 cm
Finishes Seat and back upholstered with
wooden base

Description: Wellington is a modern sofa with a

vintage touch that will embellish your
space.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-404 CUSHIONS

CSH-15

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-402

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Executive lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Melodia

Product Model 477152
Dimensions W201xD77x67H cm
Finishes Seat upholstered with metal legs

Description: Sofa with lumbar cushion and feet in

painted metal.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-403 CUSHIONS

CSH-15

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-403

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Executive lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Leslie

Product Model Armchair
Dimensions W75xD84x75H cm
Finishes Seat upholstered with wooden legs

Description: Leslie is a collection of inviting

armchairs that offer a feeling of
intimacy and protection while
outwardly expressing a formal
elegance.
SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-402 CUSHIONS

FABRIC FB- WOOD WD-01

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-404

Project Name Hilton Ahsa Item Name Stackable chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Executive lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Pro

Product Model PRO/2
Dimensions 555W x 605 D x 845 H Sh: 460 mm
Finishes Seat and back upholstered with metal
legs
Description: Pro is a classic workplace chair boasting
an assured level of comfort and comes
in both stackable or non-stackable
forms.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-702 CUSHIONS

FABRIC WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-405

Project Name Hilton Ahsa Item Name Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Executive lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Capri

Product Model 6226
Dimensions 59 W x 59D x 81 cm H
Finishes Seat and back upholstered with
wooden legs

Description: Its rounded backrest gathers the back

and provides comfort to the piece by
simulating a small arm.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-403 CUSHIONS

FABRIC WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-406

Project Name Hilton Ahsa Item Name Ergonomic chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Executive lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Aubri

Product Model 6226
Dimensions 57 W x 66 D x 86.5 cm H
Finishes Seat and back upholstered with
wooden legs and armrest
Description: Aubry is a case study in design restraint
and simplicity, with graceful lines that
seamlessly transition between each
element within the chair

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-702 CUSHIONS

FABRIC

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-407

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Ballroom prefunction Revision Number 00

SPECIFICATION / FF&E

Product Name Ca’ Foscari sofa

Product Model 2Rsika1n
Dimensions W280 cm x D95cm x H75cm, SH 40cm
Finishes Seat and back upholstered with metal
legs
Description: The Ca’ Foscari sofa has a curving form
alternating concave and convex
shapes, making it a very modern and
appealing product.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-808 CUSHIONS

CSH-15

FABRIC FB- METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-408

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Ballroom prefunction Revision Number 00

SPECIFICATION / FF&E

Product Name Daytona Olimpia armchair

Product Model 14177
Dimensions W 82 x D 84 x H 79 cm, SH 40cm
Finishes Seat and back upholstered with
wooden legs
Description: Daytona is an important collection
inspired by luxury Decò 30’s design for
a refined and elegant style.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-403 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-501

Project Name Hilton Ahsa Item Name Stackable chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Meeting rooms Revision Number 00

SPECIFICATION / FF&E

Product Name Ray

Product Model 9207/A
Dimensions W61 x D 59 x H 87 cm, SH 46cm
Finishes Seat and back upholstered with metal
legs and armrest
Description: This clever free spirit fits seamlessly
into any setting.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-702 CUSHIONS

FABRIC

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-502

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas – Meeting rooms Revision Number 00

SPECIFICATION / FF&E

Product Name Tobo armchair

Product Model 9207/A
Dimensions W70 x D 75 x H 75 cm, SH 40cm
Finishes Seat and back upholstered with
wooden legs
Description: Underpinned by a minimalist and
sophistication aesthetic of clean lines.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-502 CUSHIONS

FABRIC WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-503

Project Name Hilton Ahsa Item Name Ergonomic chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Business center & boardroom Revision Number 00

SPECIFICATION / FF&E

Product Name Legender

Product Model 9207/A
Dimensions W70 x D 75 x H 75 cm, SH 40cm
Finishes Seat and back upholstered with metal
legs
Description: Legender is the ultimate executive
chair. A combination of functionality,
class and elegance

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-702 CUSHIONS

FABRIC FB-

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-504

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Prefunction Revision Number 00

SPECIFICATION / FF&E

Product Name Megan Armchair

Product Model MEGAN-AC
Dimensions W68 x D 75 x H 71 cm, SH 44cm
Finishes Seat and back upholstered with
wooden legs
Description: Megan Armchair is a classic’s elegant
design reinterpretation. This piece can
be presented in bold combinations of
colours , tones, and patterns.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-501 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-505

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Prefunction Revision Number 00

SPECIFICATION / FF&E

Product Name Skyline

Product Model 8637
Dimensions W165 x D 95 x H 71 cm, SH 42cm
Finishes Seat and back upholstered with
wooden legs
Description: Elegant in its minimalism, the
contemporary silhouette features a
streamlined frame that sits elevated
atop a slim base available in a choice of
wood finishes.
SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-503 CUSHIONS

CSH-08 CSH-09

FABRIC WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-505

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Prefunction Revision Number 00

SPECIFICATION / FF&E

Product Name Allure

Product Model 20054353
Dimensions W280 x D 91 x H 84 cm, SH 42cm
Finishes Seat and back upholstered with metal
base
Description: The Allure collection is embellished
with new components with the aim of
providing even more comfort.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-503 CUSHIONS

CSH-10 CSH-11

FABRIC FB- METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-507

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Prefunction Revision Number 00

SPECIFICATION / FF&E

Product Name Tribeca

Product Model 1600886231
Dimensions W340x D 228 x H 79 cm, SH 42cm
Finishes Seat and back upholstered with metal
legs
Description: Showing off a plush curvaceous seat,
the sectional emerges as a natural
space for conversation.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-503 CUSHIONS

CSH-08 CSH-09

FABRIC FB- METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-508

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Prefunction Revision Number 00

SPECIFICATION / FF&E

Product Name Aston "Armchair"

Product Model 02
Dimensions W74 x D 84 x H 75 cm, SH 43cm
Finishes Seat and back upholstered with
wooden legs
Description: The Aston armchair, featuring soft
padding in the seat cushion and the
seat back, extends a comfortable
welcome

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-502 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-509

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Prefunction Revision Number 00

SPECIFICATION / FF&E

Product Name Tori Bold

Product Model Angled open end sofa
Dimensions W204 x D 100 x H 82 cm, SH 40cm
Finishes Seat and back upholstered with metal
base
Description: The slim backrest is punctuated by a
vertical quilting effect and piping that
outlines the perimeter of the
upholstery

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-503 CUSHIONS

CSH-10 CSH-11

FABRIC FB- METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-701-702

Project Name Hilton Ahsa Item Name Armchair in Living
Project Number HLTA24 Issue Date 21 May 2024
Package Name Suites 1|2|3 Revision Number 00

SPECIFICATION / FF&E

Product Name Jackie Bergere

Product Model Armchair
Dimensions D 75 x W 94 x H 85 cm
Finishes Seat and back upholstered with wood
legs
Description: Jackie bertgere with a strong
personality, characterised by the light
silhouette

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-701 CUSHIONS

FABRIC METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-703

Project Name Hilton Ahsa Item Name Sofa in Living
Project Number HLTA24 Issue Date 21 May 2024
Package Name Suites 2 | 3 Revision Number 00

SPECIFICATION / FF&E

Product Name Fatt Konyshev

Product Model 170849
Dimensions W: 280 cm D: 87 cm H: 75 cm
Finishes Seat and back upholstered with wood
legs
Description: Introduce subtle fluidity into your
living space

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-1001 CUSHIONS

CSH-08 CSH-09

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-704

Project Name Hilton Ahsa Item Name Lounge chair in Living
Project Number HLTA24 Issue Date 21 May 2024
Package Name Suite 2 | 3 Revision Number 00

SPECIFICATION / FF&E

Product Name Sunday Chaise

Product Model 1578713007
Dimensions W 150 x D 80 x H 76.2 cm
Finishes Seat and back upholstered with wood
legs
Description: The refined construction is strong
flexible polypropylene seat, back and
arms combining within a modern
design aesthetic.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-1001 CUSHIONS

CSH-08 CSH-09

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-705

Project Name Hilton Ahsa Item Name Dinning Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Suite 2 |3 Revision Number 00

SPECIFICATION / FF&E

Product Name Fume Konyshev

Product Model 190355
Dimensions D 60 x W 63 x H 86 cm
Finishes Seat and back upholstered with wood
legs and brass-detailed legs
Description: Sign is perfectly suitable for a
residential sitting area.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-701 CUSHIONS

FABRIC FB- WOOD METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-706

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Suites 2|3 Revision Number 00

SPECIFICATION / FF&E

Product Name Tape

Product Model Armchair
Dimensions D 76cm x W 77cm x H 64.5cm x SH 40cm
Finishes Seat and back upholstered with metal
legs
Description: Tape is a collection of seats with a
strong personality, characterised by the
light silhouette

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-701 CUSHIONS

FABRIC METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-707

Project Name Hilton Ahsa Item Name Ottoman
Project Number HLTA24 Issue Date 21 May 2024
Package Name Suites 2|1 Revision Number 00

SPECIFICATION / FF&E

Product Name Theodore

Product Model 79960011
Dimensions W: 55 cm D: 44 cm H: 45 cm
Finishes Seat upholstered with tapered wood
frame and brass-detailed legs
Description: Theodore footstool will add a fresh
focal point to your living space

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-701 CUSHIONS

FABRIC FB- WOOD METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-708

Project Name Hilton Ahsa Item Name Desk Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Suites 2|3 Revision Number 00

SPECIFICATION / FF&E

Product Name Velis Chair

Product Model POT VE-942
Dimensions W52 x D50 x H80 x SH47 cm
Finishes Seat and back upholstered with wooden
legs
Description: This sofa is a perfect blend of style and
functionality

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-701 CUSHIONS

FABRIC WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-709

Project Name Hilton Ahsa Item Name Desk Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Suites 3 Revision Number 00

SPECIFICATION / FF&E

Product Name Velis Chair

Product Model POT VE-942
Dimensions W52 x D50 x H80 x SH47 cm
Finishes Seat and back upholstered and wooden
legs
Description: This sofa is a perfect blend of style and
functionality

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-701 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-710

Project Name Hilton Ahsa Item Name Sofa in bedroom
Project Number HLTA24 Issue Date 21 May 2024
Package Name Suites 3 Revision Number 00

SPECIFICATION / FF&E

Product Name Mazie Sofa

Product Model 1710751785
Dimensions W 180 x D 82 X H 72 cm
Finishes Seat and back upholstered with
wooden legs
Description: Introduce subtle fluidity into your living
space with the Mazie Sofa.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-1001 CUSHIONS

CSH-08 CSH-09

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-711

Project Name Hilton Ahsa Item Name Bench
Project Number HLTA24 Issue Date 21 May 2024
Package Name Suite 3 | 1 Revision Number 00

SPECIFICATION / FF&E

Product Name Corbu bench

Product Model 700
Dimensions H:45.72 X W:167.64 X D:50.8 X
SH:45.72 cm
Finishes
Seat upholstered with wooden legs

Description:
Our furniture collection melds ancient
craftsmanship with present-day
precision, luxurious materials with
simplicity of form
SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-1001 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-712

Project Name Hilton Ahsa Item Name Sofa L Shape in living
Project Number HLTA24 Issue Date 21 May 2024
Package Name Suite 1 Revision Number 00

SPECIFICATION / FF&E

Product Name Brigid Miller

Product Model Custom made
Dimensions W 200 x L 294 x D 100 x H 80.97 cm
Finishes Seat and back upholstered with wood
legs
Description: ideal for anchoring your space with a
touch of mid-century-inspired style, this
piece features a streamlined silhouette,
recessed arms, and dowel feet.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-701 CUSHIONS

CSH-08 CSH-09

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-801

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Cigar Lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Chesterfield

Product Model Custom made
Dimensions W200 x D 100 x H 71 cm, SH 40cm
Finishes Seat and back upholstered with
wooden legs
Description: This sofa's tufted design, and antique
brass nail head trim, creates a
commanding centrepiece in any room

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-802 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-802

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Cigar Lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Ebisu armchair

Product Model 03
Dimensions H 68 x W 94 x D 80 - SH 40
Finishes Seat and back upholstered with
wooden legs
Description: It has soft lines and a large and
enveloping back. The details of wooden
basement and legs give a strong
personality.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-801 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-803

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Cigar Lounge Revision Number 00

SPECIFICATION / FF&E

Product Name PIAF

Product Model Baxter P
Dimensions W280 x D 270 x H 68 cm, SH 42cm
Finishes Seat and back upholstered with
wooden legs
Description: This sofa is a perfect blend of style and
functionality

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE:801 CUSHIONS

CSH-13

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-804

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Cigar Lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Fleming Chair

Product Model 27596
Dimensions W81.2 x D 76.2 x H 76.2 cm, SH 42cm
Finishes Seat and back upholstered with
wooden legs and armrest
Description: A well-dressed chair can add the
perfect finishing touch to a room
whether it's a comfortable everyday
spot to relax in or an occasional piece
designed to shine
SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE:802 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-805

Project Name Hilton Ahsa Item Name Bar Stool
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Cigar Lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Nail Head Tufted

Product Model 2530
Dimensions W53 x D 49 x H 102 cm, SH 76 cm
Finishes Seat and back upholstered with wood
legs and brass-detailed legs
Description: These bar stool models have hand-
sewn diamond button tufting on the
back and a smooth front with
decorative nail trim.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-801 CUSHIONS

FABRIC FB- WOOD METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-807

Project Name Hilton Ahsa Item Name Ottoman
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Cigar Lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Brighton Ottoman

Product Model 0034
Dimensions Dia 70 cm x H 45 cm
Finishes Seat with wooden base

Description: Its tufted top adds just the right

amount of polish.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-801 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-808

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Cigar Lounge Revision Number 00

SPECIFICATION / FF&E

Product Name PIAF

Product Model Baxter P
Dimensions W220 x D 220 x H 68 cm, SH 42cm
Finishes Seat and back upholstered with
wooden legs
Description: This sofa is a perfect blend of style and
functionality

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE:801 CUSHIONS

CSH: 13

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-809

Project Name Hilton Ahsa Item Name Sofa in Shisha
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Cigar Lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Talenti Argo

Product Model 69d7551
Dimensions W240 x D 75 x H 65cm, SH 40cm
Finishes Seat and back upholstered with
wooden legs
Description: The entire collection is made to give
you the freedom to mix and match the
different pieces and design and create
your outdoor space.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-801 CUSHIONS

CSH: 13

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-810

Project Name Hilton Ahsa Item Name Armchair in Shisha
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Cigar Lounge Revision Number 00

SPECIFICATION / FF&E

Product Name George

Product Model Custom made
Dimensions W: 86 cm x D: 86 cm x H: 65 cm, SH
39cm
Finishes
Seat and back upholstered with
wooden base
Description: The visual lightness of the structure
is contrasted with the generously
padded seat of back cushions.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-801 CUSHIONS

CSH: 13

FABRIC WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-811

Project Name Hilton Ahsa Item Name Sofa in majlis
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Coco lounge Revision Number 00

SPECIFICATION / FF&E

Product Name BJÖRN L

Product Model 823
Dimensions L 240 cm H 70 cm W: 180 cm
Finishes Seat and back upholstered with
wooden legs
Description: This remarkable sofa boasts an organic
shape creating an inviting and cozy
seating option that effortlessly
complements both modern and
traditional interiors.
SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-804 CUSHIONS

CSH-14

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-812

Project Name Hilton Ahsa Item Name Armchair in private cinema
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Coco lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Thomson

Product Model 1715949076
Dimensions D 50 cm H 105 cm W: 90 cm
Finishes Seat and back upholstered with metal
base
Description: The Thomson Chair offers the comfort
and luxe feel of its collection, along with a
feature that makes this upholstery
solution the ultimate embodiment of
relaxation.
SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-802 CUSHIONS

FABRIC FB- METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-813

Project Name Hilton Ahsa Item Name Dining chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Coco lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Lisbona

Product Model 20201947
Dimensions 55 W x 58 D x 75 H cm
Finishes Seat and back upholstered with metal
and wooden legs
Description: Lisbona chair is characterized by refined
look and its proportions have been
thought to grant the best comfort.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-804 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-814

Project Name Hilton Ahsa Item Name Dining chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Coco lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Saboteur

Product Model 1715921320
Dimensions W 65 x D 60 x H 78 cm
Finishes Seat and back upholstered with
wooden legs
Description: Thanks to its smooth and simple lines, it’s
ideal for all types of interiors, from the
minimalistic to the maximalist.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-804 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-815

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Coco lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Elements

Product Model 276295
Dimensions W 81.5 x D 86.5 x H 74 cm
Finishes Seat and back upholstered with
wooden legs
Description: The single chair features an innovative
and beautiful design

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-802 CUSHIONS

FABRIC WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-816

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Coco lounge Revision Number 00

SPECIFICATION / FF&E

Product Name EKAR

Product Model C02
Dimensions W 86 x D 68 x H 74 cm
Finishes Seat and back upholstered with wood
legs and brass-detailed legs
Description: It is simple and elegant in shape and
extremely comfortable. It is the best
choice for your space.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-804 CUSHIONS

FABRIC FB-803 WOOD METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-817

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Coco lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Rea

Product Model LU1706215393652
Dimensions W 240x D 100 x H 86 cm
Finishes Seat and back upholstered with
wooden legs
Description: A superb object of functional decor, this
sofa will imbue a room with modern
sophistication, while also being a
comfortable sofa.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-806 CUSHIONS

CSH-13 CSH-19

FABRIC FB-807 METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-818

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Coco lounge Revision Number 00

SPECIFICATION / FF&E

Product Name Capri Blush

Product Model LU1706215393652
Dimensions W 300x D 115 x H 75 cm
Finishes Seat and back upholstered with metal
base
Description: With an enveloping silhouette, this
inviting sofa embodies comfort and
easygoing elegance.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-807 CUSHIONS

CSH-19 CSH-14

FABRIC FB- METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-901

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Bridal suite Revision Number 00

SPECIFICATION / FF&E

Product Name Torii

Product Model Sofa low
Dimensions W 244 x D 92 x H 66 cm
Finishes Seat and back upholstered with metal
legs
Description: The horizontal elements are laid on the
vertical supports, ensuring a
sophisticated visual lightness that
accommodates the padded volume.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-807 CUSHIONS

CSH-19 CSH-14

FABRIC FB- METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-902

Project Name Hilton Ahsa Item Name Armchair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Bridal suite Revision Number 00

SPECIFICATION / FF&E

Product Name Tulip

Product Model 6476b2f4
Dimensions W. 84 x D. 86 x H. 85 cm
Finishes Seat and back upholstered with metal
base
Description: The ergonomics of the backrest and
seat together with the pads, sustained
but cozy, give a high level of comfort.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-806 CUSHIONS

FABRIC FB- METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-903

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Bridal suite Revision Number 00

SPECIFICATION / FF&E

Product Name Channel tufted couch

Product Model 8293-IEE BEI
Dimensions W 200 x D 95 x H 75 cm
Finishes Seat and back upholstered with
wooden base
Description: This Sofa adds a charming retro
modern style to space

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-804 CUSHIONS

CSH-19 CSH-14

FABRIC FB-806 WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-904

Project Name Hilton Ahsa Item Name Dining chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Bridal suite Revision Number 00

SPECIFICATION / FF&E

Product Name Océan

Product Model 1707213218
Dimensions 55cm D x 48cm W x 81cm H
Finishes Seat and back upholstered with metal
legs
Description: With a sleek design and comfortable
back rest, these dining chairs offer both
style and adaptability.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-804 CUSHIONS

FABRIC METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-905

Project Name Hilton Ahsa Item Name Dining chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Bridal suite Revision Number 00

SPECIFICATION / FF&E

Product Name Bronson Swivel Chair

Product Model BRNSON-SCHR-342-CLK
Dimensions H 82 cm x W 82 cm x D 89 cm
Finishes Seat and back upholstered with metal
base
Description: A contemporary sculptural armchair
with a distinctive organic silhouette

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-804 CUSHIONS

FABRIC FB- METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-906

Project Name Hilton Ahsa Item Name Ergonomic chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Bridal suite Revision Number 00

SPECIFICATION / FF&E

Product Name Rely

Product Model HW57
Dimensions H: 81cm W: 61cm D: 56.5cm
Finishes Seat and back upholstered with metal
base
Description: Rely is a chair with environmentally-
friendly credentials.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-804 CUSHIONS

FABRIC FB-

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-907

Project Name Hilton Ahsa Item Name Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Bridal suite Revision Number 00

SPECIFICATION / FF&E

Product Name Cayo

Product Model 17983
Dimensions H: 89.5 cm W: 57 cm D: 66 cm
Finishes Seat and back upholstered with
wooden legs
Description: This modern velvet chair will be the
centre of attention in your modern
contemporary room decor.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-804 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-908

Project Name Hilton Ahsa Item Name Ottoman
Project Number HLTA24 Issue Date 21 May 2024
Package Name Public areas–Bridal suite Revision Number 00

SPECIFICATION / FF&E

Product Name Tufty Round Ottoman

Product Model HGSC462
Dimensions H: 42 cm Dia 60 cm
Finishes Seat upholstered with metal base

Description: Sophisticated elegance. The round

Tufty ottoman features rich velour with
impeccable tufting throughout,
presenting opulent, elegant comfort..

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-1001 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-1001

Project Name Hilton Ahsa Item Name Sofa in living
Project Number HLTA24 Issue Date 21 May 2024
Package Name Presidential Suites Revision Number 00

SPECIFICATION / FF&E

Product Name Italia Chesterfield Sofa

Product Model Custom made
Dimensions D 100 x W 250 x H 71 cm
Finishes Seat and back upholstered
with wood legs
Description: A contemporary take on a
classic silhouette, our
minimalist Chesterfield exudes
understated elegance

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-1001 CUSHIONS

CSH-17 CSH-18

FABRIC WOOD

GENERAL AND CONSTRUCTION NOTE

- All materials to comply with all local civil regulations and - Base of all furniture to be fitted with concealed heavy duty nylon glides. Legs
operator requirements. and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before - Metal on furniture to be stainless steel.
manufacture and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be - Exposed metal to be without visible welded joints and to be coated with anti-
submitted for review and approval prior mass production. fingerprint finish.
- All supplied products are to be contract quality and suitable - For wet areas, metal to be Marine Grade Stainless Steel.
for commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and - Powder-coated finish can be provided.
insects. - All foams to be medium density fire retardant foam.
- Ensure height of the Low Dining Table is reviewed in relation - Padding and Dacron wrap to be fire retardant.
with the height of the furniture (chairs) adjacent to it. - Cushions to be hand filled with water repellent filling.
- All furniture to be neatly packed and secured during - Safety stich on cushions with double overlock close. Zipper at the edge of the
transportation. cushions to be concealed type.
- All wooden frames for sofas and chairs to be solid hardwood - All test certifications to be submitted for approval.
with corner blocks, glued and screwed to double dowelled
rails.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-1002

Project Name Hilton Ahsa Item Name Arm Chair in living
Project Number HLTA24 Issue Date 21 May 2024
Package Name Presidential Suites Revision Number 00

SPECIFICATION / FF&E

Product Name Paris Armchair

Product Model 11412
Dimensions L: 69 cm D: 82cm H: 70.1 cm
Finishes Seat and back upholstered with metal
legs
Description: The armchair is characterized by its
twisted structure, finished in bronze or
upholstered.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-1004 CUSHIONS

CSH-17

FABRIC METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-1003

Project Name Hilton Ahsa Item Name Arm chair in living
Project Number HLTA24 Issue Date 21 May 2024
Package Name Presidential Suites Revision Number 00

SPECIFICATION / FF&E

Product Name Divano letto room furniture

Product Model mq50cy
Dimensions L90cm x D90cm x H70cm, Seat Height
40cm
Seat and back upholstered with metal
Finishes legs

Description: Baixo Lounge, a swivel chair, is an

invitation to a new form of relaxation.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-1004 CUSHIONS

CSH-17

FABRIC METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-1004

Project Name Hilton Ahsa Item Name Desk Chair in living
Project Number HLTA24 Issue Date 21 May 2024
Package Name Presidential Suites Revision Number 00

SPECIFICATION / FF&E

Product Name CROSBY

Product Model Custom made
Dimensions H 78 cm x W 57 cm x D 58 cm
Finishes Seat and back upholstered and wooden
legs
Description: This desk chair is a perfect blend of
style and functionality

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-1001 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-1005

Project Name Hilton Ahsa Item Name Desk Chair for beauty table
Project Number HLTA24 Issue Date 21 May 2024
Package Name Presidential Suites Revision Number 00

SPECIFICATION / FF&E

Product Name Isadora dining chair

Product Model Custom made
Dimensions H: 74,5 cm W: 61 cm D: 54 cm | SH: 45
Finishes Seat, back & legs upholstered
Brushed Brass Matte
Description: Isadora artistic curved line using
brushed brass in the middle give it an
edgy vibe.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-1003 CUSHIONS

FABRIC FB- METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-1006

Project Name Hilton Ahsa Item Name Dinning Chair
Project Number HLTA24 Issue Date 21 May 2024
Package Name Presidential Suites Revision Number 00

SPECIFICATION / FF&E

Product Name Alaton

Product Model Custom made
Dimensions H 80 X W 55 X D 56 cm
Finishes Seat and back upholstered with wood
legs
Description:
Our furniture melds ancient, luxurious
materials with simplicity of form

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-1006 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-1007

Project Name Hilton Ahsa Item Name Lounge chair in bedroom
Project Number HLTA24 Issue Date 21 May 2024
Package Name Presidential Suites Revision Number 00

SPECIFICATION / FF&E

Product Name TURNER

Product Model 8167
Dimensions H:71.12 W:180.34 D:83.82 cm
Finishes Seat and back upholstered with wood
legs
Description: This handsome devil is like its
predecessors in the turner collection
but with the arm working the other
side.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-1002 CUSHIONS

FABRIC WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-1008

Project Name Hilton Ahsa Item Name Sunbeds
Project Number HLTA24 Issue Date 21 May 2024
Package Name Presidential Suites Revision Number 00

SPECIFICATION / FF&E

Product Name Byron teak daybed

Product Model 3139
Dimensions H: 63.5 W: 180.18 D: 200 cm
Finishes Seat upholstered with Aged
Teak legs and back
Description: Designed to weather the elements and
resist stains, spills, fading and mildew,
and with zippers that resist corrosion.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-302 CUSHIONS

CSH-20 CSH-21

FABRIC FB- WOOD Aged Teak

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-1009

Project Name Hilton Ahsa Item Name Armchair in second floor
Project Number HLTA24 Issue Date 21 May 2024
Package Name Presidential Suites Revision Number 00

SPECIFICATION / FF&E

Product Name ADELE

Product Model Custom made
Dimensions W88 cm x D58 cm x H82 cm
Finishes Seat and back upholstered and metal
legs
Description: The armchair with the sophisticated
constructive details that set the entire
Reeves collection apart

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-1005 CUSHIONS

FABRIC FB-1004 METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-1010

Project Name Hilton Ahsa Item Name Armchair in terrace
Project Number HLTA24 Issue Date 21 May 2024
Package Name Presidential Suites Revision Number 00

SPECIFICATION / FF&E

Product Name Bronte aluminum lounge chair

Product Model Custom made
Dimensions 79 W x 84 D x 60 H 45 SH
Finishes Seat upholstered with metal arms and
base
Description: Masterfully crafted of all-weather
aluminum, Bronte's curved frame
wraps around generously proportioned
seat cushions.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-302 CUSHIONS

CSH-20 CSH-21

FABRIC FB- WOOD WD-01

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-1011

Project Name Hilton Ahsa Item Name Sofa
Project Number HLTA24 Issue Date 21 May 2024
Package Name Presidential Suites Revision Number 00

SPECIFICATION / FF&E

Product Name Bronte aluminum sofa

Product Model Custom made
Dimensions Height: 635cm Diam: 180 x 83cm
Finishes Seat upholstered with metal arms and
base
Description: Masterfully crafted of all-weather
aluminum, Bronte's curved frame
wraps around generously proportioned
seat cushions.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-302 CUSHIONS

CSH-20 CSH-21

FABRIC WOOD WD-01

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-1012

Project Name Hilton Ahsa Item Name Armchair in terrace
Project Number HLTA24 Issue Date 21 May 2024
Package Name Presidential Suites Revision Number 00

SPECIFICATION / FF&E

Product Name Byron teak swivel lounge chair

Product Model Custom made
Dimensions 79 W x 84 D x 60 H 45 SH
Finishes Seat upholstered with Aged
Teak legs and back
Description: Designed to weather the elements and
resist stains, spills, fading and mildew,
and with zippers that resist corrosion.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-302 CUSHIONS

CSH-20

FABRIC FB- WOOD Aged Teak

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-1013

Project Name Hilton Ahsa Item Name Desk Chair in living
Project Number HLTA24 Issue Date 21 May 2024
Package Name Presidential Suites Revision Number 00

SPECIFICATION / FF&E

Product Name Ocadia armchair

Product Model Custom made
Dimensions H 83 cm x W 57 cm x D 58 cm
Finishes Seat and back upholstered and
brushed brass legs
Description: A brass frame supports the arched
backrest, which is designed to provide
comfort.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC LE-1001 CUSHIONS

FABRIC FB- METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-1014

Project Name Hilton Ahsa Item Name Bench in living
Project Number HLTA24 Issue Date 21 May 2024
Package Name Presidential Suites Revision Number 00

SPECIFICATION / FF&E

Product Name Nubian ottoman

Product Model 14748
Dimensions H 45 cm x W 148 cm x D 52 cm
Finishes Seat upholstered and brushed brass
legs
Description: Its contrasting geometrical shapes
make it a perfect addition to lavish
interiors, adding style and versatility.

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-1005 CUSHIONS

FABRIC METAL

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net

DN DESIGNS

FF&E SPECIFICATIONS SE-1015

Project Name Hilton Ahsa Item Name Bench in bedroom
Project Number HLTA24 Issue Date 21 May 2024
Package Name Presidential Suites Revision Number 00

SPECIFICATION / FF&E

Product Name Julien

Product Model 1707218865
Dimensions 120cm W x 50cm D x 50cm H
Finishes Seat upholstered with wooden base

Description: This modern marvel not only boasts a

sleek design that complements any
interior but also serves as a space-
saving ottoman

SUPPLIER
Name As per the vendor list
Address
Contact

SHOP DRAWING FABRIC FB-1003 CUSHIONS

FABRIC FB- WOOD

GENERAL AND CONSTRUCTION NOTES

- All materials to comply with all local civil regulations and operator - Base of all furniture to be fitted with concealed heavy duty nylon glides.
requirements. Legs and sides to be fully impregnated finish to resist chips and scratches.
- All Quantities to be confirmed by contractor before manufacture - Metal on furniture to be stainless steel.
and site installation. - Joints of metal to be welded, braised, and finished as specified.
- Shop drawings and physical samples (prototype) to be submitted - Exposed metal to be without visible welded joints and to be coated with
for review and approval prior mass production. anti-fingerprint finish.
- All supplied products are to be contract quality and suitable for - For wet areas, metal to be Marine Grade Stainless Steel.
commercial use. - All metal finish to be treated for corrosion, discoloration, scratch, and
- To conform to flame retardancy appropriate to this project. oxidation free.
- All materials to be suitable for high humidity locations. - Metal to have the right size to provide proper support for the furniture.
- All materials to be treated for anti-moist, humidity, and insects. - Powder-coated finish can be provided.
- Ensure height of the Low Dining Table is reviewed in relation with - All foams to be medium density fire retardant foam.
the height of the furniture (chairs) adjacent to it. - Padding and Dacron wrap to be fire retardant.
- All furniture to be neatly packed and secured during - Cushions to be hand filled with water repellent filling.
transportation. - Safety stich on cushions with double overlock close. Zipper at the edge of
- All wooden frames for sofas and chairs to be solid hardwood with the cushions to be concealed type.
corner blocks, glued and screwed to double dowelled rails. - All test certifications to be submitted for approval.

1705 Bayswater Tower, Business Bay – Dubai, UAE dndesigns.net