SAFETY DATA SHEET

Date of issue/Date of revision 30 October 2023

Version 5

Section 1. Identification
Product name : SOAP FOR ACRYLIC LATEX
Product code : WC-32-3200
Other means of : Not available.
identification
Product type : Liquid.

Relevant identified uses of the substance or mixture and uses advised against
Product use : Industrial applications.
Use of the substance/ : Coating. Paints. Painting-related materials.
mixture
Uses advised against : Not applicable.

Manufacturer : PPG Industries, Inc.

One PPG Place
Pittsburgh, PA 15272
Emergency telephone : (412) 434-4515 (U.S.)
number (514) 645-1320 (Canada)
SETIQ Interior de la República: 800-00-214-00 (México)
SETIQ Ciudad de México: (55) 5559-1588 (México)

Technical Phone Number : (513) 576-3145 (PACKAGING COATINGS) 8:00 a.m. - 5:00 p.m. EST

Section 2. Hazards identification

OSHA/HCS status : This material is considered hazardous by the OSHA Hazard Communication Standard
(29 CFR 1910.1200).
Classification of the : ACUTE TOXICITY (inhalation) - Category 4
substance or mixture SKIN IRRITATION - Category 2
EYE IRRITATION - Category 2A
Percentage of the mixture consisting of ingredient(s) of unknown acute toxicity: 34%
(oral), 34% (dermal), 34% (inhalation)
GHS label elements
Hazard pictograms :

Signal word : Warning

United States Page: 1/13

Product code WC-32-3200 Date of issue 30 October 2023 Version 5
Product name SOAP FOR ACRYLIC LATEX

Section 2. Hazards identification

Hazard statements : Causes skin irritation.
Causes serious eye irritation.
Harmful if inhaled.
Precautionary statements
Prevention : Wear protective gloves. Wear eye or face protection. Use only outdoors or in a well-
ventilated area. Avoid breathing vapor. Wash thoroughly after handling.
Response : IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a
POISON CENTER or doctor if you feel unwell. Take off contaminated clothing and
wash it before reuse. IF ON SKIN: Wash with plenty of water. If skin irritation occurs:
Get medical advice or attention. IF IN EYES: Rinse cautiously with water for several
minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye
irritation persists: Get medical advice or attention.
Storage : Not applicable.
Disposal : Not applicable.
Supplemental label : Repeated exposure to high vapor concentrations may cause irritation of the respiratory
elements system and permanent brain and nervous system damage. Inhalation of vapor/aerosol
concentrations above the recommended exposure limits causes headaches,
drowsiness and nausea and may lead to unconsciousness or death. Avoid contact with
skin and clothing. Wash thoroughly after handling. Emits toxic fumes when heated.
Hazards not otherwise : Prolonged or repeated contact may dry skin and cause irritation.
classified

Section 3. Composition/information on ingredients

Substance/mixture : Mixture
Product name : SOAP FOR ACRYLIC LATEX

Ingredient name % CAS number

2-butoxyethanol ≥10 - ≤15 111-76-2
1-pentanol ≤1.3 71-41-0

SUB codes represent substances without registered CAS Numbers.

Any concentration shown as a range is to protect confidentiality or is due to batch variation.
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
Occupational exposure limits, if available, are listed in Section 8.

Section 4. First aid measures

If ingestion, irritation, any type of overexposure or symptoms of overexposure occur during or persists after use of
this product, contact a POISON CONTROL CENTER, EMERGENCY ROOM OR PHYSICIAN immediately; have
Safety Data Sheet information available. Never give anything by mouth to an unconscious or convulsing person.
Description of necessary first aid measures
Eye contact : Remove contact lenses, irrigate copiously with clean, fresh water, holding the eyelids
apart for at least 10 minutes and seek immediate medical advice.

United States Page: 2/13

Product code WC-32-3200 Date of issue 30 October 2023 Version 5
Product name SOAP FOR ACRYLIC LATEX

Section 4. First aid measures

Inhalation : Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is
irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained
personnel.
Skin contact : Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water
or use recognized skin cleanser. Do NOT use solvents or thinners.
Ingestion : If swallowed, seek medical advice immediately and show this container or label. Keep
person warm and at rest. Do NOT induce vomiting.

Most important symptoms/effects, acute and delayed

Potential acute health effects
Eye contact : Causes serious eye irritation.
Inhalation : Harmful if inhaled.
Skin contact : Causes skin irritation. Defatting to the skin.
Ingestion : No known significant effects or critical hazards.
Over-exposure signs/symptoms
Eye contact : Adverse symptoms may include the following:
pain or irritation
watering
redness
Inhalation : No specific data.
Skin contact : Adverse symptoms may include the following:
irritation
redness
dryness
cracking
Ingestion : No specific data.

Indication of immediate medical attention and special treatment needed, if necessary

Notes to physician : Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
Specific treatments : No specific treatment.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it is
suspected that fumes are still present, the rescuer should wear an appropriate mask or
self-contained breathing apparatus. It may be dangerous to the person providing aid to
give mouth-to-mouth resuscitation.

See toxicological information (Section 11)

Section 5. Fire-fighting measures

Extinguishing media
Suitable extinguishing : Use an extinguishing agent suitable for the surrounding fire.
media
Unsuitable extinguishing : None known.
media

Specific hazards arising : In a fire or if heated, a pressure increase will occur and the container may burst.
from the chemical

United States Page: 3/13

Product code WC-32-3200 Date of issue 30 October 2023 Version 5
Product name SOAP FOR ACRYLIC LATEX

Section 5. Fire-fighting measures

Hazardous thermal : Decomposition products may include the following materials:
decomposition products carbon oxides

Special protective actions : Promptly isolate the scene by removing all persons from the vicinity of the incident if
for fire-fighters there is a fire. No action shall be taken involving any personal risk or without suitable
training.
Special protective : Fire-fighters should wear appropriate protective equipment and self-contained breathing
equipment for fire-fighters apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Section 6. Accidental release measures

Personal precautions, protective equipment and emergency procedures
For non-emergency : No action shall be taken involving any personal risk or without suitable training.
personnel Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Avoid breathing vapor or mist.
Provide adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Put on appropriate personal protective equipment.
For emergency responders : If specialized clothing is required to deal with the spillage, take note of any information in
Section 8 on suitable and unsuitable materials. See also the information in "For non-
emergency personnel".

Environmental precautions : Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental
pollution (sewers, waterways, soil or air).

Methods and materials for containment and cleaning up

Small spill : Stop leak if without risk. Move containers from spill area. Dilute with water and mop up
if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and
place in an appropriate waste disposal container. Dispose of via a licensed waste
disposal contractor.
Large spill : Stop leak if without risk. Move containers from spill area. Approach release from
upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash
spillages into an effluent treatment plant or proceed as follows. Contain and collect
spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or
diatomaceous earth and place in container for disposal according to local regulations
(see Section 13). Dispose of via a licensed waste disposal contractor. Contaminated
absorbent material may pose the same hazard as the spilled product. Note: see
Section 1 for emergency contact information and Section 13 for waste disposal.

Section 7. Handling and storage

Precautions for safe handling
Protective measures : Put on appropriate personal protective equipment (see Section 8). Do not ingest. Avoid
contact with eyes, skin and clothing. Avoid breathing vapor or mist. Use only with
adequate ventilation. Wear appropriate respirator when ventilation is inadequate. Keep
in the original container or an approved alternative made from a compatible material,
kept tightly closed when not in use. Empty containers retain product residue and can be
hazardous. Do not reuse container.

United States Page: 4/13

Product code WC-32-3200 Date of issue 30 October 2023 Version 5
Product name SOAP FOR ACRYLIC LATEX

Section 7. Handling and storage

Special precautions : If this material is part of a multiple component system, read the Safety Data Sheet(s) for
the other component or components before blending as the resulting mixture may have
the hazards of all of its parts.
Advice on general : Eating, drinking and smoking should be prohibited in areas where this material is
occupational hygiene handled, stored and processed. Workers should wash hands and face before eating,
drinking and smoking. Remove contaminated clothing and protective equipment before
entering eating areas. See also Section 8 for additional information on hygiene
measures.

Conditions for safe storage, : Do not store below the following temperature: 5°C (41°F). Store in accordance with
including any local regulations. Store in original container protected from direct sunlight in a dry, cool
incompatibilities and well-ventilated area, away from incompatible materials (see Section 10) and food
and drink. Keep container tightly closed and sealed until ready for use. Containers that
have been opened must be carefully resealed and kept upright to prevent leakage. Do
not store in unlabeled containers. Use appropriate containment to avoid environmental
contamination.

Section 8. Exposure controls/personal protection

Control parameters
Occupational exposure limits
Ingredient name Exposure limits
2-butoxyethanol ACGIH TLV (United States, 1/2022).
TWA: 20 ppm 8 hours.
OSHA PEL (United States, 5/2018).
Absorbed through skin.
TWA: 240 mg/m³ 8 hours.
TWA: 50 ppm 8 hours.
1-pentanol IPEL (-).
TWA: 20 ppm
STEL: 80 ppm
Key to abbreviations
A = Acceptable Maximum Peak S = Potential skin absorption
ACGIH = American Conference of Governmental Industrial Hygienists. SR = Respiratory sensitization
C = Ceiling Limit SS = Skin sensitization
F = Fume STEL = Short term Exposure limit values
IPEL = Internal Permissible Exposure Limit TD = Total dust
OSHA = Occupational Safety and Health Administration. TLV = Threshold Limit Value
R = Respirable TWA = Time Weighted Average
Z = OSHA 29 CFR 1910.1200 Subpart Z - Toxic and Hazardous Substances
Consult local authorities for acceptable exposure limits.
Recommended monitoring : Reference should be made to appropriate monitoring standards. Reference to national
procedures guidance documents for methods for the determination of hazardous substances will
also be required.

Appropriate engineering : Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or
controls other engineering controls to keep worker exposure to airborne contaminants below any
recommended or statutory limits.

United States Page: 5/13

Product code WC-32-3200 Date of issue 30 October 2023 Version 5
Product name SOAP FOR ACRYLIC LATEX

Section 8. Exposure controls/personal protection

Environmental exposure : Emissions from ventilation or work process equipment should be checked to ensure
controls they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.

Individual protection measures

Hygiene measures : Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Eye/face protection : Chemical splash goggles.
Skin protection
Hand protection : Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary. Considering the parameters specified by the glove manufacturer, check
during use that the gloves are still retaining their protective properties. It should be
noted that the time to breakthrough for any glove material may be different for different
glove manufacturers. In the case of mixtures, consisting of several substances, the
protection time of the gloves cannot be accurately estimated.
Gloves : For prolonged or repeated handling, use the following type of gloves:

Recommended: butyl rubber

Body protection : Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before
handling this product.
Other skin protection : Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
Respiratory protection : Respirator selection must be based on known or anticipated exposure levels, the
hazards of the product and the safe working limits of the selected respirator. If workers
are exposed to concentrations above the exposure limit, they must use appropriate,
certified respirators. Use a properly fitted, air-purifying or air-fed respirator complying
with an approved standard if a risk assessment indicates this is necessary.
The respiratory protection shall be in accordance to 29 CFR 1910.134.

Section 9. Physical and chemical properties

Appearance
Physical state : Liquid.
Color : Not available.
Odor : Not available.
Odor threshold : Not available.
pH : Not available.
Melting point : Not available.
Boiling point : >37.78°C (>100°F)
Flash point : Closed cup: 93.89°C (201°F)
Auto-ignition temperature : Not available.

United States Page: 6/13

Product code WC-32-3200 Date of issue 30 October 2023 Version 5
Product name SOAP FOR ACRYLIC LATEX

Section 9. Physical and chemical properties

Decomposition temperature : Not available.
Flammability : Not available.
Lower and upper explosive : Not available.
(flammable) limits
Evaporation rate : Not available.
Vapor pressure : Not available.
Vapor density : Not available.
Relative density : 0.96
Density ( lbs / gal ) : 8.01
Media Result
Solubility(ies) :
cold water Partially soluble

Partition coefficient: n- : Not applicable.

octanol/water
Viscosity : Kinematic (40°C (104°F)): >21 mm2/s (>21 cSt)
Volatility : 70% (v/v), 69.987% (w/w)
% Solid. (w/w) : 30.013

Section 10. Stability and reactivity

Reactivity : No specific test data related to reactivity available for this product or its ingredients.

Chemical stability : The product is stable.

Possibility of hazardous : Under normal conditions of storage and use, hazardous reactions will not occur.
reactions

Conditions to avoid : When exposed to high temperatures may produce hazardous decomposition products.
Refer to protective measures listed in sections 7 and 8.

Incompatible materials : Keep away from the following materials to prevent strong exothermic reactions:
oxidizing agents, strong alkalis, strong acids.

Hazardous decomposition : Depending on conditions, decomposition products may include the following materials:
products carbon oxides

Section 11. Toxicological information

Information on toxicological effects
Acute toxicity

United States Page: 7/13

Product code WC-32-3200 Date of issue 30 October 2023 Version 5
Product name SOAP FOR ACRYLIC LATEX

Section 11. Toxicological information

Product/ingredient name Result Species Dose Exposure
2-butoxyethanol LC50 Inhalation Vapor Rat 3 mg/l 4 hours
LD50 Dermal Rat >2000 mg/kg -
LD50 Oral Rat 1200 mg/kg -
1-pentanol LD50 Dermal Rabbit 2.312 g/kg -
LD50 Oral Rat 2.2 g/kg -
Conclusion/Summary : There are no data available on the mixture itself.
Irritation/Corrosion
Product/ingredient name Result Species Score Exposure Observation
2-butoxyethanol Eyes - Irritant Rabbit - 24 hours 21 days
Skin - Moderate irritant Rabbit - 4 hours 28 days
Conclusion/Summary
Skin : There are no data available on the mixture itself.
Eyes : There are no data available on the mixture itself.
Respiratory : There are no data available on the mixture itself.
Sensitization
Conclusion/Summary
Skin : There are no data available on the mixture itself.
Respiratory : There are no data available on the mixture itself.
Mutagenicity
Conclusion/Summary : There are no data available on the mixture itself.
Carcinogenicity
Conclusion/Summary : There are no data available on the mixture itself.
Classification
Product/ingredient name OSHA IARC NTP
2-butoxyethanol - 3 -
Carcinogen Classification code:
IARC: 1, 2A, 2B, 3, 4
NTP: Known to be a human carcinogen; Reasonably anticipated to be a human carcinogen
OSHA: +
Not listed/not regulated: -

Reproductive toxicity
Conclusion/Summary : There are no data available on the mixture itself.
Teratogenicity
Conclusion/Summary : There are no data available on the mixture itself.
Specific target organ toxicity (single exposure)
Name Category Route of Target organs
exposure
1-pentanol Category 3 - Respiratory tract
irritation
Specific target organ toxicity (repeated exposure)
Not available.

United States Page: 8/13

Product code WC-32-3200 Date of issue 30 October 2023 Version 5
Product name SOAP FOR ACRYLIC LATEX

Section 11. Toxicological information

Target organs : Contains material which causes damage to the following organs: brain.
Contains material which may cause damage to the following organs: blood, kidneys,
liver, upper respiratory tract, immune system, skin, central nervous system (CNS), eye,
lens or cornea.

Aspiration hazard
Not available.
Information on the likely routes of exposure
Potential acute health effects
Eye contact : Causes serious eye irritation.
Inhalation : Harmful if inhaled.
Skin contact : Causes skin irritation. Defatting to the skin.
Ingestion : No known significant effects or critical hazards.
Over-exposure signs/symptoms
Eye contact : Adverse symptoms may include the following:
pain or irritation
watering
redness
Inhalation : No specific data.
Skin contact : Adverse symptoms may include the following:
irritation
redness
dryness
cracking
Ingestion : No specific data.
Delayed and immediate effects and also chronic effects from short and long term exposure
Conclusion/Summary : There are no data available on the mixture itself. Exposure to component solvent vapor
concentrations in excess of the stated occupational exposure limit may result in adverse
health effects such as mucous membrane and respiratory system irritation and adverse
effects on the kidneys, liver and central nervous system. Symptoms and signs include
headache, dizziness, fatigue, muscular weakness, drowsiness and, in extreme cases,
loss of consciousness. Solvents may cause some of the above effects by absorption
through the skin. There is some evidence that repeated exposure to organic solvent
vapors in combination with constant loud noise can cause greater hearing loss than
expected from exposure to noise alone. If splashed in the eyes, the liquid may cause
irritation and reversible damage. Ingestion may cause nausea, diarrhea and vomiting.
This takes into account, where known, delayed and immediate effects and also chronic
effects of components from short-term and long-term exposure by oral, inhalation and
dermal routes of exposure and eye contact.
Short term exposure
Potential immediate : There are no data available on the mixture itself.
effects
Potential delayed effects : There are no data available on the mixture itself.
Long term exposure
Potential immediate : There are no data available on the mixture itself.
effects
Potential delayed effects : There are no data available on the mixture itself.
Potential chronic health effects
United States Page: 9/13
Product code WC-32-3200 Date of issue 30 October 2023 Version 5
Product name SOAP FOR ACRYLIC LATEX

Section 11. Toxicological information

General : Prolonged or repeated contact can defat the skin and lead to irritation, cracking and/or
dermatitis.
Carcinogenicity : No known significant effects or critical hazards.
Mutagenicity : No known significant effects or critical hazards.
Reproductive toxicity : No known significant effects or critical hazards.
Numerical measures of toxicity
Acute toxicity estimates
Product/ingredient name Oral (mg/ Dermal Inhalation Inhalation Inhalation
kg) (mg/kg) (gases) (vapors) (dusts and
(ppm) (mg/l) mists) (mg/
l)
SOAP FOR ACRYLIC LATEX 5870.7 11680.0 N/A 15.0 83.4
2-butoxyethanol 1200 2500 N/A 3 N/A
1-pentanol 2200 2312 N/A 11 1.5

Section 12. Ecological information

Toxicity
Product/ingredient name Result Species Exposure
2-butoxyethanol Acute LC50 1474 mg/l Fish 96 hours
Chronic NOEC >100 mg/l Fish 21 days

Persistence and degradability

Product/ingredient name Aquatic half-life Photolysis Biodegradability
2-butoxyethanol - - Readily

Bioaccumulative potential
Product/ingredient name LogPow BCF Potential
2-butoxyethanol 0.81 - Low
1-pentanol 1.51 - Low

Mobility in soil
Soil/water partition : Not available.
coefficient (KOC)

United States Page: 10/13

Product code WC-32-3200 Date of issue 30 October 2023 Version 5
Product name SOAP FOR ACRYLIC LATEX

Section 13. Disposal considerations

Disposal methods : The generation of waste should be avoided or minimized wherever possible. Disposal
of this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any
regional local authority requirements. Dispose of surplus and non-recyclable products
via a licensed waste disposal contractor. Waste should not be disposed of untreated to
the sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Care should be taken when handling emptied containers that have not been
cleaned or rinsed out. Empty containers or liners may retain some product residues.
Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers.
Disposal should be in accordance with applicable regional, national and local laws and regulations.
Refer to Section 7: HANDLING AND STORAGE and Section 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
for additional handling information and protection of employees. Section 6. Accidental release measures

14. Transport information

DOT IMDG IATA
UN number Not regulated. Not regulated. Not regulated.
UN proper shipping - - -
name
Transport hazard class - - -
(es)
Packing group - - -
Environmental hazards No. No. No.
Marine pollutant Not applicable. Not applicable. Not applicable.
substances

Additional information
DOT : None identified.
IMDG : None identified.
IATA : None identified.

Special precautions for user : Transport within user’s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in
the event of an accident or spillage.

Transport in bulk according : Not applicable.

to IMO instruments

United States Page: 11/13

Product code WC-32-3200 Date of issue 30 October 2023 Version 5
Product name SOAP FOR ACRYLIC LATEX

Section 15. Regulatory information

United States
United States inventory (TSCA 8b) : All components are active or exempted.
SARA 302/304
SARA 304 RQ : Not applicable.
Composition/information on ingredients
No products were found.

SARA 311/312
Classification : ACUTE TOXICITY (inhalation) - Category 4
SKIN IRRITATION - Category 2
EYE IRRITATION - Category 2A
HNOC - Defatting irritant
Composition/information on ingredients
Name % Classification
2-butoxyethanol ≥10 - ≤15 FLAMMABLE LIQUIDS - Category 4
ACUTE TOXICITY (oral) - Category 4
ACUTE TOXICITY (inhalation) - Category 3
SKIN IRRITATION - Category 2
EYE IRRITATION - Category 2A
1-pentanol ≤1.3 FLAMMABLE LIQUIDS - Category 3
ACUTE TOXICITY (inhalation) - Category 4
SKIN IRRITATION - Category 2
SERIOUS EYE DAMAGE - Category 1
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE)
(Respiratory tract irritation) - Category 3
HNOC - Defatting irritant
SARA 313
Chemical name CAS number Concentration
Supplier notification : 2-butoxyethanol 111-76-2 7 - 13

SARA 313 notifications must not be detached from the SDS and any copying and redistribution of the SDS shall include
copying and redistribution of the notice attached to copies of the SDS subsequently redistributed.
Additional environmental information is contained on the Environmental Data Sheet for this product, which
can be obtained from your PPG representative.

Section 16. Other information

Hazardous Material Information System (U.S.A.)
Health : 3 * Flammability : 1 Physical hazards : 0
( * ) - Chronic effects
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or
risks. Although HMIS® ratings and the associated label are not required on MSDSs or products leaving a facility under 29 CFR 1910.1200, the
preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program. HMIS® is a registered trademark
and service mark of the American Coatings Association, Inc.

United States Page: 12/13

Product code WC-32-3200 Date of issue 30 October 2023 Version 5
Product name SOAP FOR ACRYLIC LATEX

Section 16. Other information

The customer is responsible for determining the PPE code for this material. For more information on HMIS®
Personal Protective Equipment (PPE) codes, consult the HMIS® Implementation Manual.
National Fire Protection Association (U.S.A.)
Health : 3 Flammability : 1 Instability : 0
Date of previous issue : 1/20/2023
Organization that prepared : EHS
the SDS
Key to abbreviations : ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL = International Convention for the Prevention of Pollution From Ships, 1973
as modified by the Protocol of 1978. ("Marpol" = marine pollution)
N/A = Not available
SGG = Segregation Group
UN = United Nations
Indicates information that has changed from previously issued version.
Disclaimer
The information contained in this data sheet is based on present scientific and technical knowledge. The purpose of this
information is to draw attention to the health and safety aspects concerning the products supplied by PPG, and to
recommend precautionary measures for the storage and handling of the products. No warranty or guarantee is given in
respect of the properties of the products. No liability can be accepted for any failure to observe the precautionary measures
described in this data sheet or for any misuse of the products.

United States Page: 13/13