Laboratory Name C AND I CALIBRATIONS PVT. LTD.

, J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,

RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 1 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Permanent Facility

1 ELECTRO- AC Active Power / 0.04 W to 9.6 kW 0.011% / PF (Related Using 3 Phase

TECHNICAL- Energy,1 phase & 3 to Apparent Power) Reference Standard
ALTERNATING phaseCos Ø ± 0.01 to COM3003 / SY-3102
CURRENT (< 1 GHZ) 0.1,40Hz to 60Hz,40V By Direct / Comparison
(Measure) to 320V,>0.1 A to 120A Method
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

2 ELECTRO- AC Apparent Power / 400VA to 115.2kVA 0.011% Using 3 Phase

TECHNICAL- Energy, 1 & 3 phase Reference Standard
ALTERNATING 40Hz to 60Hz, 40V to COM 3003/SY 3102 by
CURRENT (< 1 GHZ) 320V ,>10A to 120A Direct/ Comparison
(Measure) (For Calibration of Method
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

3 ELECTRO- AC Reactive Power / 400VAr to 960kVAr 0.15% / PF to ( Related Using 3 Phase

TECHNICAL- Energy, 1 phase Sin Ø to Apparent Power) Reference Standard
ALTERNATING ± 0.10 to 1 50Hz 40V to COM 3003/SY 3102
CURRENT (< 1 GHZ) 320V ,100A to 1000A With Turn Coil by
(Measure) Direct Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 2 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
4 ELECTRO- AC Current, 40 Hz to 1 mA to 120 A 0.045% to 0.008% Using Com 3003 /MTS/
TECHNICAL- 70 Hz ( For Calibration SY-3102 By Direct /
ALTERNATING of Current Sources, Comparison Method
CURRENT (< 1 GHZ) meters)
(Measure)

5 ELECTRO- AC Current, 50 Hz ( >120 A to 2000 A 0.06% Using Com 3003 /MTS

TECHNICAL- For Calibration of / SY-3102 and Std. CT
ALTERNATING Current Sources and By Direct / Comparison
CURRENT (< 1 GHZ) AC Shunts) Method
(Measure)

6 ELECTRO- AC Current,10 Hz to 10 10 µA to 20 A 285 ppm to 122 ppm Using Fluke 8508A

TECHNICAL- kHz ( For Calibration of DMM , Agilent, Fluke
ALTERNATING Current Sources and Shunt 40B, 5790 A By
CURRENT (< 1 GHZ) meters) Direct / comparion &
(Measure) V/I Method

7 ELECTRO- AC Current,50 Hz ( For 2000 A to 3200 A 0.10% Using Com3003/MTS/

TECHNICAL- Calibration of Current SY-3102 and Std. CT
ALTERNATING Sources and By Direct / comparison
CURRENT (< 1 GHZ) measuring instruments) Method
(Measure)

8 ELECTRO- AC High Voltage,50 Hz 500 V to 33 kV 0.6 % Using EPD 33kV with

TECHNICAL- ( For calibration of HV Standard
ALTERNATING Sources, probes, Capacitor,Standard VT,
CURRENT (< 1 GHZ) Dividers) 6 ½ Digital Multimeter
(Measure) by Direct/ comparison
Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 3 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
9 ELECTRO- AC High Voltage,50 >33 kV to 200 kV 3% Using HV Divider with
TECHNICAL- Hz(For calibration of DMM/KV Meter (Direct
ALTERNATING HV Sources, Dividers / Comparison Method)
CURRENT (< 1 GHZ) and HV Probes)
(Measure)

10 ELECTRO- AC Power ,320V-600 16 W to 12 kW 0.16 to 0.23% / PF to ( Using Power meter

TECHNICAL- V, 0.5A - 20 A, PF ± Related to Apparent Yokogawa WT 230 By
ALTERNATING 0.1 to 11 phase Power) Direct Method
CURRENT (< 1 GHZ)
(Measure)

11 ELECTRO- AC Power / Energy 1 0.02 W to 4.8 W 0.023% / PF(Related to Using 3 Phase

TECHNICAL- phase & 3 phase Apparent Power) Reference Standard
ALTERNATING ActiveCos Ø ± 0.10 to COM 3003 / SY-3102
CURRENT (< 1 GHZ) 1 , 40Hz to 60Hz, 40V By Direct / Comparison
(Measure) to 320V5mA ( For Method
Calibration of
Power/Energy
Calibrators, Energy
Meters, Power
Analysers)

12 ELECTRO- AC Power / Energy, 1 0.004W to 4.8W 0.04% / PF to ( Related Using 3 Phase

TECHNICAL- phase & 3 phase to Apparent Power) Reference Standard
ALTERNATING Active, Cos Ø ± 0.1 to SY-3102 By Direct /
CURRENT (< 1 GHZ) 1,40Hz to 60Hz ,40V to comparison Method
(Measure) 320V ,1mA to 5mA (For
Calibration of Power/
Energy Calibrators,
Power Analysers,
Energy Standards)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 4 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
13 ELECTRO- AC Power / Energy,1 0.02W to 48W 0.018% / PF to ( Using 3 Phase
TECHNICAL- phase & 3 phase Related to Apparent Reference Standard
ALTERNATING Active,Cos Ø ± 0.10 to Power) COM 3003 / SY-3102
CURRENT (< 1 GHZ) 1,40Hz to 60Hz,40V to By Direct Method
(Measure) 320V,>5mA to 50mA
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

14 ELECTRO- AC Power / Energy,1 2VA to 9.6kVA 0.010% Using 3 Phase

TECHNICAL- phase & 3 phase Reference Standard
ALTERNATING Apparent,40Hz to COM 3003 / SY-3102
CURRENT (< 1 GHZ) 60Hz,40V to By Direct / comparison
(Measure) 320V,>50mA to 10A MethodMethod
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

15 ELECTRO- AC Power / Energy,1 0.2VA to 48VA 0.018% Using 3 Phase

TECHNICAL- phase & 3 phase Reference Standard
ALTERNATING Apparent,40Hz to COM 3003 / SY-3102
CURRENT (< 1 GHZ) 60Hz,40V to By Direct/ Comparison
(Measure) 320V,>5mA to 50mA Method Method
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 5 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
16 ELECTRO- AC Power / Energy,1 40W to 115.2kW 0.011% / PF to Using 3 Phase
TECHNICAL- phase & 3 (Related to Apparent Reference Standard
ALTERNATING phaseActive,Cos Ø ± Power) COM 3003 / SY-3102
CURRENT (< 1 GHZ) 0.10 to 1,40Hz to By Direct /Comparison
(Measure) 60Hz,40V to Method
320V,>10A to 120A
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

17 ELECTRO- AC Power / Energy,1 0.2W to 9.6kW 0.010% / PF to ( Using 3 Phase

TECHNICAL- phase & 3 Related to Apparent Reference Standard
ALTERNATING phaseActive,Cos Ø ± Power) COM 3003 / SY-3102
CURRENT (< 1 GHZ) 0.10 to 1,40Hz to By Direct / Comparison
(Measure) 60Hz,40V to Method
320V,>50mA to 10A
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 6 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
18 ELECTRO- AC Power / Energy,1 400VA to 115.2kVA 0.011% Using 3 Phase
TECHNICAL- phase & 3 Reference Standard
ALTERNATING phaseApparent,40Hz to COM 3003 / SY-3102
CURRENT (< 1 GHZ) 60Hz,40V to By Direct/ Comparison
(Measure) 320V,>10A to 120A Method
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

19 ELECTRO- AC Power / Energy,1 0.04VA to 4.8VA 0.04% Using 3 Phase

TECHNICAL- phase & 3 reference Standard SY-
ALTERNATING phaseApparent,40Hz to 3102 By Direct /
CURRENT (< 1 GHZ) 60Hz,40V to 320V,1mA Comparison Method
(Measure) to 5mA (For Calibration
of Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

20 ELECTRO- AC Power / Energy,1 0.2VA to 4.8VA 0.023% Using 3 Phase

TECHNICAL- phase & 3 Reference Standard
ALTERNATING phaseApparent,40Hz to COM 3003 / SY-3102
CURRENT (< 1 GHZ) 60Hz,40V to 320V,5mA By Direct / comparison
(Measure) (For Calibration of Method
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 7 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
21 ELECTRO- AC Power / Energy,1 0.004VAr to 4.8VAr 0.04%% / PF to ( Using 3 Phase
TECHNICAL- phase & 3 Related to Apparent Reference Standard
ALTERNATING phaseReactive,Sin Ø ± Power) SY-3102 By Direct/
CURRENT (< 1 GHZ) 0.1 to 1,40Hz to Comparison Method
(Measure) 60Hz,40V to 320V1mA
to 5mA (For Calibration
of Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

22 ELECTRO- AC Power / Energy,1 40VAr to 115.2kVAr 0.011% / PF to ( Using 3 Phase

TECHNICAL- phase & 3 Related to Apparent Reference Standard
ALTERNATING phaseReactive,Sin Ø ± Power) COM 3003 / SY-3102
CURRENT (< 1 GHZ) 0.10 to 1,40Hz to by Direct / Comparison
(Measure) 60Hz,40V to Method
320V,>10A to 120A
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 8 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
23 ELECTRO- AC Power / Energy,1 0.2VAr to 9.6kVAr 0.010% / PF to ( Using 3 Phase
TECHNICAL- phase & 3 Related to Apparent Reference Standard
ALTERNATING phaseReactive,Sin Ø ± Power) COM 3003 / SY-3102
CURRENT (< 1 GHZ) 0.10 to 1,40Hz to by Direct / Comparison
(Measure) 60Hz,40V to Method
320V,>50mA to 10A
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

24 ELECTRO- AC Power / Energy,1 0.02VAr to 48VAr 0.018% / PF to ( Using 3 Phase

TECHNICAL- phase & 3 Related to Apparent Reference Standard
ALTERNATING phaseReactive,Sin Ø ± Power) COM 3003 / SY-3102
CURRENT (< 1 GHZ) 0.10 to 1,40Hz to by Direct / Comparison
(Measure) 60Hz,40V to Method
320V,>5mA to 50mA
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 9 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
25 ELECTRO- AC Power / Energy,1 0.02VAr to 4.8VAr 0.023% / PF to ( Using 3 Phase
TECHNICAL- phase & 3 Related to Apparent Reference Standard
ALTERNATING phaseReactive,Sin Ø ± Power) COM 3003 / SY-3102
CURRENT (< 1 GHZ) 0.10 to 1,40Hz to By Direct / Comparison
(Measure) 60Hz,40V to Method
320V,5mA(For
Calibration of Power/
Energy Calibrators,
Power Analysers,
Energy Standards)

26 ELECTRO- AC Power / Energy,1 400W to 960kW 0.15% / PF to ( Related Using 3 Phase

TECHNICAL- phase Active,Cos Ø ± to Apparent Power) Reference Standard
ALTERNATING 0.10 to 1,50Hz , 40V to COM 3003 / SY-3102
CURRENT (< 1 GHZ) 320V,100 A to 1000 A By Direct Method
(Measure)

27 ELECTRO- AC Resistance, 1kHz ( 1 Ohm to 100 kOhm 400 ppm to 550 ppm Using LCR Meter By
TECHNICAL- For calibration of Direct / Comparison
ALTERNATING Standard Resistorsand Method
CURRENT (< 1 GHZ) LCR meters)
(Measure)

28 ELECTRO- AC Voltage 10 V to 480 40 Hz to 60 Hz 110ppm to 70ppm Using 3 Phase Ref.

TECHNICAL- V ( Calibration of Standard COM 3003/
ALTERNATING Voltage Sources and SY- 3102 By Direct /
CURRENT (< 1 GHZ) meters) Comparison Method
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 10 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
29 ELECTRO- AC Voltage 1mV to 10 Hz to 20 kHz 1700 ppm to 126 ppm Using AC Std. Fluke
TECHNICAL- 22mV( For calibration 5790A, 8508A DMM ,
ALTERNATING of Voltage Sources and HP ,Agilent By Direct /
CURRENT (< 1 GHZ) meters) Comparison Method
(Measure)

30 ELECTRO- AC Voltage 1mV to 100 KHz to 1 MHz 0.3% to 1.4% Using AC Std. Fluke
TECHNICAL- 22mV( For calibration 5790, 8508A DMM ,
ALTERNATING of Voltage Sources and HP ,Agilent By Direct/
CURRENT (< 1 GHZ) meters) Comparison Method
(Measure)

31 ELECTRO- AC Voltage 1mV to 20 kHz to 100 kHz 0.012% to 0.3% Using AC Std. Fluke
TECHNICAL- 22mV( For calibration 5790, 8508A DMM ,
ALTERNATING of Voltage Sources and HP ,Agilent By Direct/
CURRENT (< 1 GHZ) meters) Comparison Method
(Measure)

32 ELECTRO- AC Voltage 22 mV to 10 Hz to 10 kHz 165 ppm to 33 ppm Using AC Std. Fluke

TECHNICAL- 22 V ( for calibration of 5790, 8508A DMM ,
ALTERNATING Voltage sources and HP ,Agilent By Direct /
CURRENT (< 1 GHZ) meters) Comparison Method
(Measure)

33 ELECTRO- AC Voltage 22 mV to 10 kHz to 1 MHz 28 ppm to 3300 ppm Using AC Std. Fluke
TECHNICAL- 22 V ( For calibration of 5790, 8508A DMM ,
ALTERNATING Voltage Sources and HP ,Agilent By Direct /
CURRENT (< 1 GHZ) meters) comparison Method
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 11 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
34 ELECTRO- AC Voltage 22 V to 220 10 Hz to 100 KHz 28 ppm to 100 ppm Using AC Std. Fluke
TECHNICAL- V( For calibration of 5790, 8508A DMM ,
ALTERNATING Voltage Sources and HP ,Agilent By Direct/
CURRENT (< 1 GHZ) meters) Comparison Method
(Measure)

35 ELECTRO- AC Voltage 220 V to 10 Hz to 10 kHz 40 ppm to 85 ppm Using AC Std. Fluke

TECHNICAL- 1000 V( For calibration 5790, 8508A DMM ,
ALTERNATING of Voltage Sources and HP ,Agilent by Direct
CURRENT (< 1 GHZ) meters) /Comparison Method
(Measure)

36 ELECTRO- Capacitance , 1kHz ( 1 pF to 1000 pF 0.12% to 0.04% Using LCR Meter, By

TECHNICAL- for calibration of std Direct/ Comparison
ALTERNATING capacitors, LCR meter) Method
CURRENT (< 1 GHZ)
(Measure)

37 ELECTRO- Capacitance , 1kHz( 1000 pF to 100 µF 0.04% to 0.38% Using LCR Meter, by
TECHNICAL- For calibration of Direct / Comparison
ALTERNATING capacitors and LCR Method
CURRENT (< 1 GHZ) meters)
(Measure)

38 ELECTRO- CT-VT Comparator 63.5V to 110V RE:0.01% & Using Standard

TECHNICAL- (AITTS), VT ModeRatio PE:0.5Min. Capacitor/Voltage
ALTERNATING error & Phase error, Transformer with
CURRENT (< 1 GHZ) 50Hz Automatic Instrument
(Measure) transformer test set
(AITTS) By
Comparison Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 12 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
39 ELECTRO- CT-VT Comparator 1 A to 5 A RE:0.012% & Using Precision current
TECHNICAL- (AITTS),CT ModeRatio PE:0.54Min. transformer, Automatic
ALTERNATING error & Phase error, Instrument transformer
CURRENT (< 1 GHZ) 50Hz test set (AITTS) By
(Measure) Comparison Method

40 ELECTRO- Current Transformer 1% to 120% of Rated 5 RE : 0.03%, PE : 2.5 Using Precision current
TECHNICAL- Primary Injection A to 2000 A Min. transformer, Automatic
ALTERNATING method, Ratio error & Instrument transformer
CURRENT (< 1 GHZ) Phase error at 50Hz, test set (AITTS) and
(Measure) 1A & 5A (Secondary) High Current Source

41 ELECTRO- Current 1% to 120% of Rated RE:0.12% to Using Precision current

TECHNICAL- TransformerPrimary 1A to 5A 0.46%;PE: 6.2 to 17min transformer, Automatic
ALTERNATING Injection method, Ratio Instrument transformer
CURRENT (< 1 GHZ) error & Phase error, test set (AITTS) and
(Measure) 50Hz,1A, High Current Source
5A(Secondary) By Direct Method

42 ELECTRO- Current 1% to 120% of Rated RE:0.056 % to Using Precision current

TECHNICAL- TransformerPrimary 2000A to 3200 A 0.067%;PE: 3 to 5.64 transformer, Automatic
ALTERNATING Injection method, Ratio min Instrument transformer
CURRENT (< 1 GHZ) error & Phase error, test set (AITTS) and
(Measure) 50Hz,1A,5A(Secondary High Current Source
) By Direct Method

43 ELECTRO- Harmonics in Current 1st order to 40th order 0.8% Using 3 Phase
TECHNICAL- ,Fundamental Reference Standard
ALTERNATING Frequency 50 Hz 10 COM 3003 / SY-3102
CURRENT (< 1 GHZ) mA to 24 A ( For By Direct/ Comparison
(Measure) calibrationof Harmonic Method
analysers and
generators)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 13 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
44 ELECTRO- Harmonics in Voltage 1 st order to 40 th order 0.4% Using 3 Phase
TECHNICAL- ,Fundamental reference Standard SY-
ALTERNATING Frequency 50 Hz 40 V 3102 By Direct
CURRENT (< 1 GHZ) to 240 V ( For /Comparison Method
(Measure) calibrationof Harmonics
analysers and
generators)

45 ELECTRO- Inductance , 1kHz ( for 100 µH to 1000µH 0.3% to 0.04% Using LCR Meter By
TECHNICAL- calibration of Inductors Direct / Comparison
ALTERNATING and LCR meters) Method
CURRENT (< 1 GHZ)
(Measure)

46 ELECTRO- Inductance , 1kHz ( For 1000 µH to 10 H 0.04% to 0.06% Using LCR Meter By
TECHNICAL- calibration of Inductors Direct/ Comparison
ALTERNATING and LCR meters) Method
CURRENT (< 1 GHZ)
(Measure)

47 ELECTRO- Potential Transformer / 120% to 80% of Rated RE:0.14% & PE: 7Min. Using Standard
TECHNICAL- Capacitor Voltage 110 V to 3.3 kV Voltage Transformer,
ALTERNATING Transformer/Voltage EPD with capacitor
CURRENT (< 1 GHZ) Divider Primary 33kV with Automatic
(Measure) Injection Method, Ratio instrument transformer
error & Phase error, test set (AITTS),and
50Hz, 63.5V/110V High Voltage Source
Secondary (50V - By Direct Method
144V)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 14 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
48 ELECTRO- Potential Transformer / 120%to 80% of Rated RE:0.12% &; PE:7 Min. Using Standard
TECHNICAL- Capacitor Voltage 66 kV/Root(3) to 66 Voltage Transformer
ALTERNATING Transformer/Voltage kV/Root(3) 66kV with Automatic
CURRENT (< 1 GHZ) DividerPrimary instrument transformer
(Measure) Injection Method, Ratio test set (AITTS),and
error & Phase error, High Voltage Source
50Hz,110V/Root(3) By Direct Method
Secondary (50V -
144V)

49 ELECTRO- Potential Transformer / 120% to 80% of Rated RE:0.07% & PE:3 Min. Using EPD and
TECHNICAL- Capacitor Voltage 3.3 kV/Root(3) to 33 Capacitor 33kV,
ALTERNATING Transformer/Voltage kV/Root(3) Standard Voltage
CURRENT (< 1 GHZ) DividerPrimary Transformer with
(Measure) Injection Method, Ratio Automatic instrument
error & Phase error, transformer test set
50Hz, 63.5V/110V (AITTS),and High
Secondary ( 50V - Voltage Source By
144V) Direct Method

50 ELECTRO- Potential Transformer / 120%to80% of Rated RE:0.14% & PE:7 Min. Using Standard
TECHNICAL- Capacitor Voltage 110 V/Root(3) to 3.3 Voltage Transformer,
ALTERNATING Transformer/Voltage kV/Root(3) EPD with capacitor
CURRENT (< 1 GHZ) DividerPrimary 33kV with Automatic
(Measure) Injection Method, Ratio instrument transformer
error & Phase error, test set (AITTS),and
50Hz, 63.5V/110V High Voltage Source
Secondary (50V - By Direct Method
144V)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 15 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
51 ELECTRO- Potential Transformer / 120% to 80% of Rated RE:0.07% & PE:3Min. Using EPD and
TECHNICAL- Capacitor Voltage 3.3 kV to 33 kV Capacitor 33kV,
ALTERNATING Transformer/Voltage Standard Voltage
CURRENT (< 1 GHZ) Divider, Primary Transformer with
(Measure) Injection Method, Ratio Automatic instrument
error & Phase error, transformer test set
50Hz, 63.5V/110V (AITTS),and High
Secondary ( 50V - Voltage Source By
144V) Direct Method

52 ELECTRO- Power Factor 40 Hz to 0.01 PF to 1 PF 0.0005 PF Using 3 Phase

TECHNICAL- 70 Hz ( For calibration lead/lag Reference Standard
ALTERNATING of Phase shifters and COM 3003/SY3102 by
CURRENT (< 1 GHZ) PF meters) Direct / Comparison
(Measure) Method

53 ELECTRO- Voltage Ratio 0.8 Turn to 2021 Turn 0.04% to 0.05% Using Fluke
TECHNICAL- 8508A/Agilent/ HP By
ALTERNATING Direct Method
CURRENT (< 1 GHZ)
(Measure)

54 ELECTRO- AC Current 10 Hz to 10 10 µA to 20 A 0.11% to 0.017% Fluke 5720A MFC with

TECHNICAL- kHZ Amplifier by Direct
ALTERNATING Method
CURRENT (< 1 GHZ)
(Source)

55 ELECTRO- AC Current 40 Hz to 70 1 mA to 100 A 0.045% to 0.16% Using Fluke 5720

TECHNICAL- Hz /52120 Amplifier
ALTERNATING
CURRENT (< 1 GHZ)
(Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 16 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
56 ELECTRO- AC Current 50 Hz 120A to 1000 A 0.45% to 0.45% MFC 9100 with Current
TECHNICAL- Coil by Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Source)

57 ELECTRO- AC Power ,320V-600 16 W to 12 kW 0.16% / PF to ( Related MFC Fluke 5080 A by

TECHNICAL- V, 0.5A - 20 A, PF ± to Apparent Power) Direct Method
ALTERNATING 0.1 to 11 phase
CURRENT (< 1 GHZ)
(Source)

58 ELECTRO- AC Voltage 20 kHz to 1 10 mV to 20 V 6500 ppm to 120 ppm Using MFC Fluke
TECHNICAL- MHz 5720A /9100/5080A By
ALTERNATING Direct Method
CURRENT (< 1 GHZ)
(Source)

59 ELECTRO- AC Voltage 50 Hz to 1 200 V to 1100 V 120 ppm to 65 ppm Using MFC Fluke
TECHNICAL- kHz 5720A /9100/5080A By
ALTERNATING Direct Method
CURRENT (< 1 GHZ)
(Source)

60 ELECTRO- AC Voltage 50 Hz to 20 1 mV to 20 mV 4800 ppm to 300 ppm Using MFC Fluke

TECHNICAL- KHz 5720A /9100/5080A By
ALTERNATING Direct Method
CURRENT (< 1 GHZ)
(Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 17 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
61 ELECTRO- AC Voltage 50 Hz to 20 20 mV to 200 mV 300 ppm to 120 ppm Using MFC Fluke
TECHNICAL- KHz 5720A /9100/5080A By
ALTERNATING Direct Method
CURRENT (< 1 GHZ)
(Source)

62 ELECTRO- AC Voltage 50 Hz to 20 200 mV to 200 V 120 ppm to 59 ppm Using MFC Fluke
TECHNICAL- KHz 5720A /9100/5080A By
ALTERNATING Direct Method
CURRENT (< 1 GHZ)
(Source)

63 ELECTRO- Capacitance 1kHz 1000 pF to 100 µF 0.35% to 0.7% Using MFC 9100 by
TECHNICAL- Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Source)

64 ELECTRO- Capacitance 1kHz 500 pF to 1000 pF 0.35% Using MFC 9100 by

TECHNICAL- Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Source)

65 ELECTRO- Inductance 1kHz 100 µH to 1000 µH 0.3% to 0.04% Using Decade

TECHNICAL- Inductance box by
ALTERNATING Direct Method
CURRENT (< 1 GHZ)
(Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 18 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
66 ELECTRO- Inductance 1kHz 1000 µH to 10 H 0.04% to 0.06% Using Decade
TECHNICAL- Inductance box by
ALTERNATING Direct Method
CURRENT (< 1 GHZ)
(Source)

67 ELECTRO- Voltage Ratio 0.8 Turn to 2021 Turn 0.05% to 0.08% Amber make Ratio
TECHNICAL- Standard by Direct
ALTERNATING Method
CURRENT (< 1 GHZ)
(Source)

68 ELECTRO- DC Current 20 A to 100 A 0.05% to 0.5% Using Fluke 8508A

TECHNICAL- DIRECT DMM , osaw Resistor
CURRENT (Measure) Fluke 40B By Direct
Method

69 ELECTRO- DC Current ( For 100 µA to 100 mA 20 ppm to 30 ppm Using Fluke 8508A
TECHNICAL- DIRECT calibration of Current DMM , Agilent, Shunt
CURRENT (Measure) Sources, Meters, Fluke 40B by Direct /
Shunts) Comparison by V/R
Method

70 ELECTRO- DC Current ( For 1µA to 100 µA 460 ppm to 20 ppm Using Fluke 8508A
TECHNICAL- DIRECT calibration of Current DMM , Agilent, Shunt
CURRENT (Measure) Sources, Shunts and Fluke 40B By Direct /
meters) Comparison /V/R
Method

71 ELECTRO- DC Current ( For 100 mA to 20 A 30 ppm to 50 ppm Using Fluke 8508A

TECHNICAL- DIRECT calibration of Current DMM , Agilent, Shunt
CURRENT (Measure) Sources, Shunts and Fluke 40B By Direct /
metrs) comparison & V/I
Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 19 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
72 ELECTRO- DC Current (For 0.05 nA to 1 µA 3 % to 0.25 % Using PA meter
TECHNICAL- DIRECT calibration of Current Keithley 6485 by Direct
CURRENT (Measure) Sources, Meters ) / comparison Method
Method

73 ELECTRO- DC Power ,1.5 V-1000 0.15 W to 20 kW 0.011% to 0.055% Using Fluke

TECHNICAL- DIRECT V ,0.1 A to 20 A 8508A/5080A,
CURRENT (Measure) Yokogawa & 6 ½ DMM
By Direct / Comparison
Method

74 ELECTRO- DC Resistance 0.001 ohm to 1 ohm 0.02% Using Std. Resistance

TECHNICAL- DIRECT By Direct / VI Method
CURRENT (Measure)

75 ELECTRO- DC Resistance 0.1mohm to 1 mohm 0.032% Using Fluke 5720 A

TECHNICAL- DIRECT and 8508 A by V/I
CURRENT (Measure) Method

76 ELECTRO- DC Resistance 1 MOhm to 100 MOhm 11 ppm to 160 ppm Using Fluke 8508A
TECHNICAL- DIRECT DMM , 5720 A By
CURRENT (Measure) Direct / VI Method

77 ELECTRO- DC Resistance 1 Ohm to 1 MOhm 19 ppm to 11 ppm Using Fluke 8508A

TECHNICAL- DIRECT DMM , 5720 A By
CURRENT (Measure) Direct / VI Method

78 ELECTRO- DC Resistance 100 MOhm to 20 160 ppm to 1800 ppm Using Fluke 8508A
TECHNICAL- DIRECT GOhm DMM , 5720 A By
CURRENT (Measure) Direct / VI Method

79 ELECTRO- DC Resistance 20 GOhm to 10 TOhm 1 % to 2 % Using pA Meter/ Fluke

TECHNICAL- DIRECT 5080A Direct by V / I
CURRENT (Measure) Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 20 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
80 ELECTRO- DC Voltage ( for 1 kV to 30kV 2.5 % Using HV Probe with
TECHNICAL- DIRECT calibration of HV DMM & Source by
CURRENT (Measure) Sources and Probes) Direct / Comparison
Method

81 ELECTRO- DC Voltage ( For 1 mV to 10 V 200 ppm to 4 ppm Using Fluke 8508A

TECHNICAL- DIRECT calibration of Sources DMM , HP ,Agilent by
CURRENT (Measure) and meters) Direct/ Comparison
Method

82 ELECTRO- DC Voltage ( for 10 V to 1000 V 4 ppm to 8 ppm Using Fluke 8508A

TECHNICAL- DIRECT calibration of Sources DMM , HP ,Agilent by
CURRENT (Measure) and meters) Direct/ Comparison
Method

83 ELECTRO- DC Current 1 µA to 100 µA 0.61% to 0.02% Using Fluke 5720A

TECHNICAL- DIRECT /5080A by Direct
CURRENT (Source) Method

84 ELECTRO- DC Current 100 µA to 20 A 200ppm Using Fluke 5720A

TECHNICAL- DIRECT /52120A by Direct
CURRENT (Source) Method

85 ELECTRO- DC Current 100 A to 1000 A 0.45 % Using Fluke 5720A with

TECHNICAL- DIRECT Amplifier /9100/
CURRENT (Source) 5080A/52120A &
Current Coil by Direct
Method

86 ELECTRO- DC Current 20 A to 100 A 200 ppm to 360 ppm Using Fluke 5720A with
TECHNICAL- DIRECT Amplifier 52120A by
CURRENT (Source) Direct Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 21 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
87 ELECTRO- DC Power ,1.5 V-1000 0.15 W to 20 kW 0.011% to 0.055% Using Fluke MFC
TECHNICAL- DIRECT V ,0.1 A to 20 A 5080A by Direct
CURRENT (Source) Method

88 ELECTRO- DC Resistance 0.1mohm to 0.1mohm 0.012% Using Standard

TECHNICAL- DIRECT Resistance by Direct
CURRENT (Source) method

89 ELECTRO- DC Resistance 1 mohm to 1 mohm 0.012% Using Standard

TECHNICAL- DIRECT Resistance by Direct
CURRENT (Source) Method

90 ELECTRO- DC Resistance 1 MOhm to 100 MOhm 22 ppm to 120 ppm Using Fluke
TECHNICAL- DIRECT 5720A/5080A / 9100 by
CURRENT (Source) Direct Method

91 ELECTRO- DC Resistance 1 Ohm to 19 Ohm 125 ppm to 100 ppm Using Fluke
TECHNICAL- DIRECT 5720A/5080A / 9100 by
CURRENT (Source) Direct Method

92 ELECTRO- DC Resistance 10 mOhm to 10 mOhm 0.012% Using Standard

TECHNICAL- DIRECT Resistance by Direct
CURRENT (Source) Method

93 ELECTRO- DC Resistance 100 mOhm to 100 0.012% Using Standard

TECHNICAL- DIRECT mOhm Resistance by Direct
CURRENT (Source) Method

94 ELECTRO- DC Resistance 100 MOhm to 400 65 ppm to 900 ppm Using MFC 9100 by
TECHNICAL- DIRECT MOhm Direct Method
CURRENT (Source)

95 ELECTRO- DC Resistance 19 Ohm to 1 MOhm 100 ppm to 22 ppm Using Fluke

TECHNICAL- DIRECT 5720A/5080 / 9100 by
CURRENT (Source) Direct Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 22 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
96 ELECTRO- DC Voltage 1 mV to 100 mV 470 ppm to 11 ppm Using MFC Fluke
TECHNICAL- DIRECT 5720A By Direct
CURRENT (Source) Method

97 ELECTRO- DC Voltage 10 V to 1100 V 4.72 ppm to 9.7 ppm Using MFC Fluke
TECHNICAL- DIRECT 5720A /9100/5080A By
CURRENT (Source) Direct Method

98 ELECTRO- DC Voltage 100 mV to 10 V 11 ppm to 4.72 ppm Using MFC Fluke

TECHNICAL- DIRECT 5720A /9100/5080A By
CURRENT (Source) Direct Method

99 ELECTRO- Insulation Resistance 10 kOhm to 18 GOhm 0.2% to 1.5% Using Fluke 5080A
TECHNICAL- DIRECT MEG with 10 kV divider
CURRENT (Source) by Direct Method

100 ELECTRO- Insulation Resistance 10 GOhm to 10 TOhm 1.5% to 2.5% Using Fluke 5080A
TECHNICAL- DIRECT up to 10kV MEG with 10 kV divider
CURRENT (Source) by Direct Method

101 ELECTRO- RF Power,10MHz-3 1 µW to 20 mW ( -60 0.51dB to 0.86dB Using R&S Meter By

TECHNICAL- GHz,( -60 dBm to +13 dBm to +13 dBm) Direct / Comparison
RF/MICROWAVE (1 dBm) Method
GHZ AND ABOVE)
(Measure)

102 ELECTRO- RF Voltage ,10MHz- 7 mV to 1 V 4.1% Using R&S RF

TECHNICAL- 3GHz Voltmeter URV 55 By
RF/MICROWAVE (1 Direct Method
GHZ AND ABOVE)
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 23 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
103 ELECTRO- RF Power 10 MHz to 1 1 µW to 20 mW ( -60 0.48dB Using HP Signal
TECHNICAL- GHz (-60dBm to +13 dBm to +13 dBm) Generator by Direct
RF/MICROWAVE (1 dBm) Method
GHZ AND ABOVE)
(Source)

104 ELECTRO- RF Voltage 10 MHz to 7mV to 1 V 1 % to 4.1% Using Leveled Sine

TECHNICAL- 1 GHz Generator and 9100
RF/MICROWAVE (1 MFC By Direct Method
GHZ AND ABOVE)
(Source)

105 ELECTRO- Temp. (-) 600°C to 1800 °C 0.03 °C Using Fluke 8508 A by
TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller B Type
(Measure) Thermocouple

106 ELECTRO- Temp. (-)400°C to 2320 °C 0.06 °C Using Fluke 8508 A by

TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller C Type
(Measure) Thermocouple

107 ELECTRO- Temp. (-)250°C to 1000 °C 0.023 °C Using Fluke 8508 A by

TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller E Type
(Measure) Thermocouple

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 24 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
108 ELECTRO- Temp. (-)200°C to 1200 °C 0.018 °C Using Fluke 8508 A by
TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller J Type
(Measure) Thermocouple

109 ELECTRO- Temp. (-)200°C to 1370 °C 0.014 °C Using Fluke 8508 A by

TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller K Type
(Measure) Thermocouple

110 ELECTRO- Temp. (-)200°C to 1300 °C 0.02 °C Using Fluke 8508 A by

TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller L Type
(Measure) Thermocouple

111 ELECTRO- Temp. (-)200°C to 1300 °C 0.028 °C Using Fluke 8508 A by

TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller N Type
(Measure) Thermocouple

112 ELECTRO- Temp. (-)50°C to 1770 °C 0.03 °C Using Fluke 8508 A by

TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller R Type
(Measure) Thermocouple

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 25 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
113 ELECTRO- Temp. (-)200°C to 850 °C 0.017 °C Using Fluke 8508 A by
TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller RTD/PRT
(Measure) Type Thermocouple

114 ELECTRO- Temp. (-)50°C to 1770 °C 0.03 °C Using Fluke 8508 A

TECHNICAL- SimulationProcess /Agilent by Direct /
TEMPERATURE Calibrator/Recorder Simulation Method
SIMULATION /Controller S Type
(Measure) Thermocouple

115 ELECTRO- Temp. (-)200°C to 400 °C 0.018 °C Using Fluke 8508 A

TECHNICAL- SimulationProcess /Agilent by Direct /
TEMPERATURE Calibrator/Recorder Simulation Method
SIMULATION /Controller T Type
(Measure) Thermocouple

116 ELECTRO- Temperature (-) 600°C to 1800 °C 0.06 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100 by
TEMPERATURE ontroller)B Type Direct Method
SIMULATION (Source) Thermocouple

117 ELECTRO- Temperature (-)400°C to 2320 °C 0.03 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100by
TEMPERATURE ontroller)C Type Direct Method
SIMULATION (Source) Thermocouple

118 ELECTRO- Temperature (-) 250°C to 1000 °C 0.08 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100 by
TEMPERATURE ontroller)E Type Direct Method
SIMULATION (Source) Thermocouple

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 26 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
119 ELECTRO- Temperature (-) 200°C to 1200 °C 0.011 °C Using Fluke
TECHNICAL- Simulation(Recorder/C 5720/5080A/9100 by
TEMPERATURE ontroller)J Type Direct Method
SIMULATION (Source) Thermocouple

120 ELECTRO- Temperature (-)200°C to 1370 °C 0.013 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100 by
TEMPERATURE ontroller)K Type Direct Method
SIMULATION (Source) Thermocouple

121 ELECTRO- Temperature (-)200°C to 1300 °C 0.011 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100 by
TEMPERATURE ontroller)L Type Direct Method
SIMULATION (Source) Thermocouple

122 ELECTRO- Temperature (-)200°C to 1300 °C 0.02 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100 by
TEMPERATURE ontroller)N Type Direct Method
SIMULATION (Source) Thermocouple

123 ELECTRO- Temperature (-)50°C to 1770 °C 0.07 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100 by
TEMPERATURE ontroller)R Type Direct Method
SIMULATION (Source) Thermocouple

124 ELECTRO- Temperature (-)200°C to 850 °C 0.009 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100/ by
TEMPERATURE ontroller)RTD/PRT Direct Method
SIMULATION (Source)

125 ELECTRO- Temperature (-)50°C to 1770 °C 0.07 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100 by
TEMPERATURE ontroller)S Type Direct / Method
SIMULATION (Source) Thermocouple

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 27 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
126 ELECTRO- Temperature (-)200°C to 400 °C 0.02°C Using Fluke 5720/9100
TECHNICAL- Simulation(Recorder/C by Direct Method
TEMPERATURE ontroller)T Type
SIMULATION (Source) Thermocouple

127 ELECTRO- Frequency ( For 40 Hz to 70 Hz 0.025 % Using 3 Phase

TECHNICAL- TIME & calibration of Freq reference Standard
FREQUENCY Sources and meters) COM 3003/MTS by
(Measure) Direct/ Comparison
Method

128 ELECTRO- Frequency/period 1 Hz (1sec) to 3 GHz ( 4 .1 ppm to 0.1 ppm Using Fluke 8508A
TECHNICAL- TIME & 0.33 n sec) DMM , Agilent /Freq.
FREQUENCY Counter/ 9100 By
(Measure) Direct / Comparison
Method

129 ELECTRO- Time Interval 10 nsec. to 100000 0.11ppm to 6.02ppm Using Frequency
TECHNICAL- TIME & sec. Counter CNT90 by
FREQUENCY Comparison method
(Measure)

130 ELECTRO- Frequency/Period 1 Hz to 1 GHz( 1sec to 30 ppm to 5 ppm Using MFC 9100 and
TECHNICAL- TIME & 1nsec) HP Signal Generator
FREQUENCY (Source) by Direct Method

131 ELECTRO- Time Interval 10 nsec. to 100000 26ppm MFC 9100 by Direct
TECHNICAL- TIME & sec. Method
FREQUENCY (Source)

132 FLUID FLOW- FLOW Cumulative Mass of 100 kg to 10000kg 0.068 % rdg Using Mass Flow Meter
MEASURING Fluid (Medium:Water) by Comparison Method
DEVICES

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 28 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
133 FLUID FLOW- FLOW Mass flow 0.1kg/min to 833 0.07 % of rdg Using Mass Flow Meter
MEASURING rate(Medium:Water) kg/min by Comparison Method
DEVICES

134 FLUID FLOW- FLOW Quantity of 0.1 m³ to 10 m³ 0.08% rdg Using Mass,Volume
MEASURING Volume(Medium:Water Flow Meter by
DEVICES ) Comparison Method

135 FLUID FLOW- FLOW Volume Flow Rate 0.06 m³/h to 50 m³/h 0.09 % rdg Using Mass Flow Meter
MEASURING (Medium:Water) by Comparison Method
DEVICES

136 FLUID FLOW- FLOW Volume Flow Rate 1 m³/h to 50 m³/h 0.33%rdg Using Electro
MEASURING (Medium:Water) Magnetic/Mass Flow
DEVICES meter by Comparison
Method

137 MECHANICAL- SPEED (Contact 100 rpm to 6000 rpm 11 rpm Using Tachometer
ACCELERATION AND type)Tachometer
SPEED

138 MECHANICAL- SPEED (Non-contact 100 rpm to 6000 rpm 5 rpm Using Tachometer
ACCELERATION AND type)RPM indicators,
SPEED Centrifuges

139 MECHANICAL- SPEED (Non-contact 6000 rpm to 60000 rpm 26 rpm Using Tachometer
ACCELERATION AND type)Tachometer
SPEED

140 MECHANICAL- Sound Level Meter 94 dB & 114dB at 0.4 dB Using Sound Level
ACOUSTICS 1KHz Calibrator

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 29 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
141 MECHANICAL- Angle Bevel Protector/ 0 ° to 180 ° 4min Using Angle Gauges
DIMENSION (BASIC Combination Set /
MEASURING Clinometers,LC: 5 min
INSTRUMENT,
GAUGE ETC.)

142 MECHANICAL- Caliper( Digital, 0 mm to 1000 mm 31.8µm Using Gauge Block Set
DIMENSION (BASIC Vernier) L.C.- 0.01 mm & Caliper Checker
MEASURING
INSTRUMENT,
GAUGE ETC.)

143 MECHANICAL- Caliper( Digital/ 0 mm to 600 mm 10.6µm Using Gauge Block Set
DIMENSION (BASIC Vernier) L.C.- 0.01 mm & Caliper Checker
MEASURING
INSTRUMENT,
GAUGE ETC.)

144 MECHANICAL- Coating Thickness 10 µm to 935 µm 2.0µm Using Foils Set by

DIMENSION (BASIC Gauges comparison method
MEASURING
INSTRUMENT,
GAUGE ETC.)

145 MECHANICAL- Dial Bore Gauge Upto 1.8 mm 3.5µm Using Gauge Block Set
DIMENSION (BASIC (Transmission / Digital Gauge Sylvac
MEASURING Movement only) ,L.C.
INSTRUMENT, 0.01 mm
GAUGE ETC.)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 30 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
146 MECHANICAL- Dial Gauge ,L.C. 0.001 0 mm to 25 mm 0.9 µm Using Gauge Block Set
DIMENSION (BASIC mm / Digital Gauge Sylvac
MEASURING
INSTRUMENT,
GAUGE ETC.)

147 MECHANICAL- External 0 mm to 100 mm 1.4µm Using Gauge Block Set

DIMENSION (BASIC Micrometer,L.C. 0.001
MEASURING mm
INSTRUMENT,
GAUGE ETC.)

148 MECHANICAL- External 0 mm to 200 mm 7.0µm Using Gauge Block Set

DIMENSION (BASIC Micrometer,L.C. 0.01 & caliper checker With
MEASURING mm Gauge block
INSTRUMENT, accessories set
GAUGE ETC.)

149 MECHANICAL- External 200 mm to 600 mm 10.0µm Using Gauge Block Set
DIMENSION (BASIC Micrometer,L.C. 0.01 & caliper checker With
MEASURING mm Gauge block
INSTRUMENT, accessories set
GAUGE ETC.)

150 MECHANICAL- External 600 mm to 1000 mm 15.0µm Using Gauge Block Set
DIMENSION (BASIC Micrometer,L.C. 0.01 & caliper checker With
MEASURING mm Gauge block
INSTRUMENT, accessories set
GAUGE ETC.)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 31 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
151 MECHANICAL- Feeler Gauge 0.01 mm to 1.0 mm 1.5µm Using Digital
DIMENSION (BASIC Micrometer
MEASURING
INSTRUMENT,
GAUGE ETC.)

152 MECHANICAL- Height Gauge ,L.C. 0 mm to 300 mm 9 µm Using Gauge Block Set
DIMENSION (BASIC 0.01 mm & Caliper Checker
MEASURING
INSTRUMENT,
GAUGE ETC.)

153 MECHANICAL- Height GaugeL.C. 0.01 0 mm to 1000 mm 11.0µm Using Gauge Block Set
DIMENSION (BASIC mm & Caliper Checker
MEASURING
INSTRUMENT,
GAUGE ETC.)

154 MECHANICAL- Internal 5 mm to 30 mm 1.2µm Using Gauge Block Set

DIMENSION (BASIC Micrometer,L.C. 0.001 & Gauge block
MEASURING mm accessories
INSTRUMENT,
GAUGE ETC.)

155 MECHANICAL- Internal 5 mm to 1000 mm 15.0µm Using Gauge Block Set

DIMENSION (BASIC Micrometer,L.C. 0.01 & Gauge block
MEASURING mm accessories:
INSTRUMENT,
GAUGE ETC.)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 32 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
156 MECHANICAL- Sprit Level ,LC: 0.02 0 mm to 200 mm 16µm/meter Using Sine bar & Slip
DIMENSION (BASIC mm/Meter Gauge Set
MEASURING
INSTRUMENT,
GAUGE ETC.)

157 MECHANICAL- Std. Foils Set 10 µm to 2000 µm 1.3µm Using Digital Plunger
DIMENSION (BASIC Dial Gauge L.C. 0.1µm
MEASURING
INSTRUMENT,
GAUGE ETC.)

158 MECHANICAL- Steel Scale / 0 m to 10 m 0.25mm Using Digital Scale

DIMENSION (BASIC Measuring Tape Calibration System by
MEASURING comparison method
INSTRUMENT,
GAUGE ETC.)

159 MECHANICAL- Thickness Gauge( Dial/ 0.1 mm to 25 mm 7.0µm Using Gauge Block Set
DIMENSION (BASIC Digital )
MEASURING
INSTRUMENT,
GAUGE ETC.)

160 MECHANICAL- Deadweight Testers 6 bar to 60 bar 0.013 % rdg Using Dead Weight
PRESSURE BALANCE Tester By Cross Float
OR DEAD WEIGHT Principle Comparison
TESTER method based on
Euramet eg-3

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 33 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
161 MECHANICAL- Deadweight Testers 60 bar to 1200 bar 0.013 % rdg Using Dead Weight
PRESSURE BALANCE Tester By Cross Float
OR DEAD WEIGHT Principle Comparison
TESTER method based on
Euramet eg-3

162 MECHANICAL- Barometers 300 mbar to 1200 mbar 0.052% of rdg Using Precision Digital
PRESSURE Gauges
INDICATING DEVICES

163 MECHANICAL- Digital/Analog Pressure 0 bar to 700 bar 0.034% rdg Using Precision Digital
PRESSURE Gauges, Pressure Gauges By
INDICATING DEVICES Transmitters Comparison Method

164 MECHANICAL- Digital/Analog Pressure 0 bar to 2 bar 0.082% rdg Using Precision Digital
PRESSURE Gauges,Transmitters Gauges
INDICATING DEVICES

165 MECHANICAL- Pressure Calibrator, 6 bar to 1200 bar 0.012% rdg Using Dead Weight
PRESSURE Analog & Digital Tester,Digital Pressure
INDICATING DEVICES Pressure Gauges, Calibrator,DMM based
Pressure on DKD R 6-1
Transducers,Transmitt
ers

166 MECHANICAL- Pressure Gauges, 0 bar to 2 bar Abs 0.069% rdg Using Precision Digital
PRESSURE Absolute gauge Gauge
INDICATING DEVICES

167 MECHANICAL- Vacuum Gauges, (-) 0.93 bar to 0 bar 0.07% rdg Using Precision Digital
PRESSURE Transducers,Transmitt Gauges
INDICATING DEVICES er

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 34 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
168 MECHANICAL- Micro Pipettes 10 µl to 1000 µl 0.16 µl Using Electronic
VOLUME weighing Balance with
readability of 0.01 mg.
Procedure based on
ISO 8655 Part 6.

169 MECHANICAL- VOLUME Pipettes / 1 ml to 50 ml 0.26 µl Electronic weighing

VOLUME Burettes / Measuring Balance with readability
Flask & Cylinders of 80 g ( 0.01 mg), 220
g (0.1 mg) & 6100 g
(10 mg). Procedure as
per ISO 4787.

170 MECHANICAL- VOLUMEipettes / 50 ml to 150 ml 0.30 µl Electronic weighing

VOLUME Burettes / Measuring Balance with readability
Flask & Cylinders of 80 g ( 0.01 mg), 220
g (0.1 mg) & 6100 g
(10 mg). Procedure as
per ISO 4787.

171 MECHANICAL- VOLUMEPipettes / 150 ml to 5 l 0.065 ml Electronic weighing

VOLUME Burettes / Measuring Balance with readability
Flask & Cylinders of 80 g ( 0.01 mg), 220
g (0.1 mg) & 6100 g
(10 mg). Procedure as
per ISO 4787.

172 MECHANICAL- Weights (Class of 500 mg 0.01 mg Using Standard

WEIGHTS Weights E2, Weights E1/E2 Balance
F1,F2,M1,M2,M3) ,Readability 0.01 mg

173 MECHANICAL- Weights (Class of 1g 0.018 mg Using Standard

WEIGHTS Weights Weights E1/E2 Balance
F1,F2,M1,M2,M3) ,Readability 0.01 mg

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 35 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
174 MECHANICAL- Weights (Class of 1 mg 0.008 mg Using Standard
WEIGHTS Weights Weights E1/E2 Balance
F1,F2,M1,M2,M3) ,Readability 0.01mg

175 MECHANICAL- Weights (Class of 10 g 0.065 mg Using Standard

WEIGHTS Weights Weights E1/E2 Balance
F1,F2,M1,M2,M3) ,Readability 0.01 mg

176 MECHANICAL- Weights (Class of 10 mg 0.008 mg Using Standard

WEIGHTS Weights Weights E1/E2 Balance
F1,F2,M1,M2,M3) ,Readability 0.01mg

177 MECHANICAL- Weights (Class of 100 g 0.16 mg Using Weights E2

WEIGHTS Weights Balance ,Readability
F1,F2,M1,M2,M3) 0.1mg

178 MECHANICAL- Weights (Class of 100 mg 0.008 mg Using Standard

WEIGHTS Weights Weights E1/E2 Balance
F1,F2,M1,M2,M3) ,Readability 0.01 mg

179 MECHANICAL- Weights (Class of 1000 g 6.5 mg Using Weights F1

WEIGHTS Weights Balance Readability 10
F1,F2,M1,M2,M3) mg

180 MECHANICAL- Weights (Class of 10000 g 0.50 g Using Weights

WEIGHTS Weights F1/F2/M1 Balance
F1,F2,M1,M2,M3) Readability 1g

181 MECHANICAL- Weights (Class of 2g 0.018 mg Using Standard

WEIGHTS Weights Weights E1/E2 Balance
F1,F2,M1,M2,M3) ,Readability 0.01 mg

182 MECHANICAL- Weights (Class of 2 mg 0.008 mg Using Standard

WEIGHTS Weights Weights E1/E2 Balance
F1,F2,M1,M2,M3) ,Readability 0.01mg

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 36 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
183 MECHANICAL- Weights (Class of 20 g 0.065 mg Using Standard
WEIGHTS Weights Weights E1/E2 Balance
F1,F2,M1,M2,M3) ,Readability 0.01 mg

184 MECHANICAL- Weights (Class of 20 mg 0.008 mg Using Standard

WEIGHTS Weights Weights E1/E2 Balance
F1,F2,M1,M2,M3) ,Readability 0.01 mg

185 MECHANICAL- Weights (Class of 200 g 0.16 mg Using Weights E2

WEIGHTS Weights Balance ,Readability
F1,F2,M1,M2,M3) 0.1mg

186 MECHANICAL- Weights (Class of 200 mg 0.008 mg Using Standard

WEIGHTS Weights Weights E1/E2 Balance
F1,F2,M1,M2,M3) ,Readability 0.01 mg

187 MECHANICAL- Weights (Class of 2000 g 6.5 mg Using Weights F1

WEIGHTS Weights Balance Readability 10
F1,F2,M1,M2,M3) mg

188 MECHANICAL- Weights (Class of 20000 g 0.50 g Using Weights

WEIGHTS Weights F1/F2/M1 Balance
F1,F2,M1,M2,M3) Readability 1g

189 MECHANICAL- Weights (Class of 5g 0.018 mg Using Standard

WEIGHTS Weights Weights E1/E2 Balance
F1,F2,M1,M2,M3) ,Readability 0.01 mg

190 MECHANICAL- Weights (Class of 5 mg 0.008 mg Using Standard

WEIGHTS Weights Weights E1/E2 Balance
F1,F2,M1,M2,M3) ,Readability 0.01mg

191 MECHANICAL- Weights (Class of 50 g 0.065 mg Using Standard

WEIGHTS Weights Weights E1/E2 Balance
F1,F2,M1,M2,M3) ,Readability 0.01 mg

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 37 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
192 MECHANICAL- Weights (Class of 50 mg 0.008 mg Using Standard
WEIGHTS Weights Weights E1/E2 Balance
F1,F2,M1,M2,M3) ,Readability 0.01 mg

193 MECHANICAL- Weights (Class of 500 g 6.5 mg Using Weights F1

WEIGHTS Weights Balance ,Readability 10
F1,F2,M1,M2,M3) mg

194 MECHANICAL- Weights (Class of 5000 g 10 mg Using Weights F1

WEIGHTS Weights Balance Readability 10
F1,F2,M1,M2,M3) mg

195 THERMAL- SPECIFIC Humidity Sensor With 20 % RH to 90 % RH 0.8% RH Using Standard

HEAT & HUMIDITY Indicator/Controller,The @ 25°C Humidity Indicator with
rmo Hygrometer sensor and humidity
Chamber / Generator
By Comparison Method

196 THERMAL- SPECIFIC Humidity Sensor With 20 °C to 50 °C 0.45 °C Using Standard PRT
HEAT & HUMIDITY Indicator/Controller,The @50%RH PT-100 sensor with
rmo Hygrometer Indicator Chamber /
Generator By
Comparison Method

197 THERMAL- Pyrometer, Black Body 50 °C to 500 °C 2.86 °C Using Std. Non Contact
TEMPERATURE Source ,IR Pyrometer & Black
Thermometer. body
Source(Emissivity:0.95)
By Comparison Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 38 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
198 THERMAL- Pyrometer, Black Body 500 °C to 1200 °C 3.9 °C Using Std. Non Contact
TEMPERATURE Source, IR Pyrometer & Black
Thermometer body
Source(Emissivity:0.95)
By Comparison Method

199 THERMAL- RTD sensor, 0°C to 650 °C 0.13 °C Using Liquid Bath, Dry
TEMPERATURE Thermocouple with or Block Calibrator, PRT
without Indicator, glass with Indicator, DMM, by
thermometer ( up to Comparison Method
250°C), Analog Temp
Gauge.

200 THERMAL- RTD sensor, (-) 35 °C to 0 °C 0.13 °C Using Liquid Bath, PRT
TEMPERATURE Thermocouple with or with Indicator ,DMM by
without Indicator, Glass Comparison Method
Thermometer, Analog
Temp Gauge

201 THERMAL- RTD, Thermocouple 500 °C to 1000 °C 1.91 °C Using S Type

TEMPERATURE Sensors with or without Thermocouple with
Indicator, Analog Temp Indicator,DMM and Dry
Gauge. block calibrator by
comparison method.

202 THERMAL- Thermocouple with or 1000 °C to 1200 °C 2.04 °C Using S Type

TEMPERATURE without Indicator. Thermocouple with
Indicator,DMM , dry
well Temperature bath
by comparison method.

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 39 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

1 ELECTRO- AC Active Power / 0.04 W to 9.6 kW 0.011% / PF (Related Using 3 Phase

TECHNICAL- Energy,1 phase & 3 to Apparent Power) Reference Standard
ALTERNATING phaseCos Ø ± 0.01 to COM3003 / SY-3102
CURRENT (< 1 GHZ) 0.1,40Hz to 60Hz,40V By Direct / Comparison
(Measure) to 320V,>0.1 A to 120A Method
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

2 ELECTRO- AC Apparent Power / 400VA to 115.2kVA 0.011% Using 3 Phase

TECHNICAL- Energy, 1 & 3 phase Reference Standard
ALTERNATING 40Hz to 60Hz, 40V to COM 3003/SY 3102 by
CURRENT (< 1 GHZ) 320V ,>10A to 120A Direct/ Comparison
(Measure) (For Calibration of Method
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

3 ELECTRO- AC Reactive Power / 400VAr to 960kVAr 0.15% / PF to ( Related Using 3 Phase

TECHNICAL- Energy, 1 phase Sin Ø to Apparent Power) Reference Standard
ALTERNATING ± 0.10 to 1 50Hz 40V to COM 3003/SY 3102
CURRENT (< 1 GHZ) 320V ,100A to 1000A With Turn Coil by
(Measure) Direct Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 40 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

4 ELECTRO- AC Current, 40 Hz to 1 mA to 120 A 0.045% to 0.008% Using Com 3003 /MTS/

TECHNICAL- 70 Hz ( For Calibration SY-3102 By Direct /
ALTERNATING of Current Sources, Comparison Method
CURRENT (< 1 GHZ) meters)
(Measure)

5 ELECTRO- AC Current, 50 Hz ( >120 A to 2000 A 0.06% Using Com 3003 /MTS

TECHNICAL- For Calibration of / SY-3102 and Std. CT
ALTERNATING Current Sources and By Direct / Comparison
CURRENT (< 1 GHZ) AC Shunts) Method
(Measure)

6 ELECTRO- AC Current,10 Hz to 10 10 µA to 20 A 285 ppm to 122 ppm Using Fluke 8508A

TECHNICAL- kHz ( For Calibration of DMM , Agilent, Fluke
ALTERNATING Current Sources and Shunt 40B, 5790 A By
CURRENT (< 1 GHZ) meters) Direct / comparion &
(Measure) V/I Method

7 ELECTRO- AC Current,50 Hz ( For 2000 A to 3200 A 0.10% Using Com3003/MTS/

TECHNICAL- Calibration of Current SY-3102 and Std. CT
ALTERNATING Sources and By Direct / comparison
CURRENT (< 1 GHZ) measuring instruments) Method
(Measure)

8 ELECTRO- AC High Voltage,50 Hz 500 V to 33 kV 0.6 % Using EPD 33kV with

TECHNICAL- ( For calibration of HV Standard
ALTERNATING Sources, probes, Capacitor,Standard VT,
CURRENT (< 1 GHZ) Dividers) 6 ½ Digital Multimeter
(Measure) by Direct/ comparison
Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 41 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

9 ELECTRO- AC High Voltage,50 >33 kV to 200 kV 3% Using HV Divider with

TECHNICAL- Hz(For calibration of DMM/KV Meter (Direct
ALTERNATING HV Sources, Dividers / Comparison Method)
CURRENT (< 1 GHZ) and HV Probes)
(Measure)

10 ELECTRO- AC Power ,320V-600 16 W to 12 kW 0.16 to 0.23% / PF to ( Using Power meter

TECHNICAL- V, 0.5A - 20 A, PF ± Related to Apparent Yokogawa WT 230 By
ALTERNATING 0.1 to 11 phase Power) Direct Method
CURRENT (< 1 GHZ)
(Measure)

11 ELECTRO- AC Power / Energy 1 0.02 W to 4.8 W 0.023% / PF(Related to Using 3 Phase

TECHNICAL- phase & 3 phase Apparent Power) Reference Standard
ALTERNATING ActiveCos Ø ± 0.10 to COM 3003 / SY-3102
CURRENT (< 1 GHZ) 1 , 40Hz to 60Hz, 40V By Direct / Comparison
(Measure) to 320V5mA ( For Method
Calibration of
Power/Energy
Calibrators, Energy
Meters, Power
Analysers)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 42 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

12 ELECTRO- AC Power / Energy, 1 0.004W to 4.8W 0.04% / PF to ( Related Using 3 Phase

TECHNICAL- phase & 3 phase to Apparent Power) Reference Standard
ALTERNATING Active, Cos Ø ± 0.1 to SY-3102 By Direct /
CURRENT (< 1 GHZ) 1,40Hz to 60Hz ,40V to comparison Method
(Measure) 320V ,1mA to 5mA (For
Calibration of Power/
Energy Calibrators,
Power Analysers,
Energy Standards)

13 ELECTRO- AC Power / Energy,1 0.02W to 48W 0.018% / PF to ( Using 3 Phase

TECHNICAL- phase & 3 phase Related to Apparent Reference Standard
ALTERNATING Active,Cos Ø ± 0.10 to Power) COM 3003 / SY-3102
CURRENT (< 1 GHZ) 1,40Hz to 60Hz,40V to By Direct Method
(Measure) 320V,>5mA to 50mA
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 43 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

14 ELECTRO- AC Power / Energy,1 2VA to 9.6kVA 0.010% Using 3 Phase

TECHNICAL- phase & 3 phase Reference Standard
ALTERNATING Apparent,40Hz to COM 3003 / SY-3102
CURRENT (< 1 GHZ) 60Hz,40V to By Direct / comparison
(Measure) 320V,>50mA to 10A MethodMethod
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

15 ELECTRO- AC Power / Energy,1 0.2VA to 48VA 0.018% Using 3 Phase

TECHNICAL- phase & 3 phase Reference Standard
ALTERNATING Apparent,40Hz to COM 3003 / SY-3102
CURRENT (< 1 GHZ) 60Hz,40V to By Direct/ Comparison
(Measure) 320V,>5mA to 50mA Method Method
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 44 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

16 ELECTRO- AC Power / Energy,1 40W to 115.2kW 0.011% / PF to Using 3 Phase

TECHNICAL- phase & 3 (Related to Apparent Reference Standard
ALTERNATING phaseActive,Cos Ø ± Power) COM 3003 / SY-3102
CURRENT (< 1 GHZ) 0.10 to 1,40Hz to By Direct /Comparison
(Measure) 60Hz,40V to Method
320V,>10A to 120A
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

17 ELECTRO- AC Power / Energy,1 0.2W to 9.6kW 0.010% / PF to ( Using 3 Phase

TECHNICAL- phase & 3 Related to Apparent Reference Standard
ALTERNATING phaseActive,Cos Ø ± Power) COM 3003 / SY-3102
CURRENT (< 1 GHZ) 0.10 to 1,40Hz to By Direct / Comparison
(Measure) 60Hz,40V to Method
320V,>50mA to 10A
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 45 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

18 ELECTRO- AC Power / Energy,1 400VA to 115.2kVA 0.011% Using 3 Phase

TECHNICAL- phase & 3 Reference Standard
ALTERNATING phaseApparent,40Hz to COM 3003 / SY-3102
CURRENT (< 1 GHZ) 60Hz,40V to By Direct/ Comparison
(Measure) 320V,>10A to 120A Method
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

19 ELECTRO- AC Power / Energy,1 0.04VA to 4.8VA 0.04% Using 3 Phase

TECHNICAL- phase & 3 reference Standard SY-
ALTERNATING phaseApparent,40Hz to 3102 By Direct /
CURRENT (< 1 GHZ) 60Hz,40V to 320V,1mA Comparison Method
(Measure) to 5mA (For Calibration
of Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

20 ELECTRO- AC Power / Energy,1 0.2VA to 4.8VA 0.023% Using 3 Phase

TECHNICAL- phase & 3 Reference Standard
ALTERNATING phaseApparent,40Hz to COM 3003 / SY-3102
CURRENT (< 1 GHZ) 60Hz,40V to 320V,5mA By Direct / comparison
(Measure) (For Calibration of Method
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 46 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

21 ELECTRO- AC Power / Energy,1 0.004VAr to 4.8VAr 0.04%% / PF to ( Using 3 Phase

TECHNICAL- phase & 3 Related to Apparent Reference Standard
ALTERNATING phaseReactive,Sin Ø ± Power) SY-3102 By Direct/
CURRENT (< 1 GHZ) 0.1 to 1,40Hz to Comparison Method
(Measure) 60Hz,40V to 320V1mA
to 5mA (For Calibration
of Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

22 ELECTRO- AC Power / Energy,1 40VAr to 115.2kVAr 0.011% / PF to ( Using 3 Phase

TECHNICAL- phase & 3 Related to Apparent Reference Standard
ALTERNATING phaseReactive,Sin Ø ± Power) COM 3003 / SY-3102
CURRENT (< 1 GHZ) 0.10 to 1,40Hz to by Direct / Comparison
(Measure) 60Hz,40V to Method
320V,>10A to 120A
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 47 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

23 ELECTRO- AC Power / Energy,1 0.2VAr to 9.6kVAr 0.010% / PF to ( Using 3 Phase

TECHNICAL- phase & 3 Related to Apparent Reference Standard
ALTERNATING phaseReactive,Sin Ø ± Power) COM 3003 / SY-3102
CURRENT (< 1 GHZ) 0.10 to 1,40Hz to by Direct / Comparison
(Measure) 60Hz,40V to Method
320V,>50mA to 10A
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

24 ELECTRO- AC Power / Energy,1 0.02VAr to 48VAr 0.018% / PF to ( Using 3 Phase

TECHNICAL- phase & 3 Related to Apparent Reference Standard
ALTERNATING phaseReactive,Sin Ø ± Power) COM 3003 / SY-3102
CURRENT (< 1 GHZ) 0.10 to 1,40Hz to by Direct / Comparison
(Measure) 60Hz,40V to Method
320V,>5mA to 50mA
(For Calibration of
Power/ Energy
Calibrators, Power
Analysers, Energy
Standards)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 48 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

25 ELECTRO- AC Power / Energy,1 0.02VAr to 4.8VAr 0.023% / PF to ( Using 3 Phase

TECHNICAL- phase & 3 Related to Apparent Reference Standard
ALTERNATING phaseReactive,Sin Ø ± Power) COM 3003 / SY-3102
CURRENT (< 1 GHZ) 0.10 to 1,40Hz to By Direct / Comparison
(Measure) 60Hz,40V to Method
320V,5mA(For
Calibration of Power/
Energy Calibrators,
Power Analysers,
Energy Standards)

26 ELECTRO- AC Power / Energy,1 400W to 960kW 0.15% / PF to ( Related Using 3 Phase

TECHNICAL- phase Active,Cos Ø ± to Apparent Power) Reference Standard
ALTERNATING 0.10 to 1,50Hz , 40V to COM 3003 / SY-3102
CURRENT (< 1 GHZ) 320V,100 A to 1000 A By Direct Method
(Measure)

27 ELECTRO- AC Resistance, 1kHz ( 1 Ohm to 100 kOhm 400 ppm to 550 ppm Using LCR Meter By
TECHNICAL- For calibration of Direct / Comparison
ALTERNATING Standard Resistorsand Method
CURRENT (< 1 GHZ) LCR meters)
(Measure)

28 ELECTRO- AC Voltage 10 V to 480 40 Hz to 60 Hz 110ppm to 70ppm Using 3 Phase Ref.

TECHNICAL- V ( Calibration of Standard COM 3003/
ALTERNATING Voltage Sources and SY- 3102 By Direct /
CURRENT (< 1 GHZ) meters) Comparison Method
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 49 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

29 ELECTRO- AC Voltage 1mV to 10 Hz to 20 kHz 1700 ppm to 126 ppm Using AC Std. Fluke
TECHNICAL- 22mV( For calibration 5790A, 8508A DMM ,
ALTERNATING of Voltage Sources and HP ,Agilent By Direct /
CURRENT (< 1 GHZ) meters) Comparison Method
(Measure)

30 ELECTRO- AC Voltage 1mV to 100 KHz to 1 MHz 0.3% to 1.4% Using AC Std. Fluke
TECHNICAL- 22mV( For calibration 5790, 8508A DMM ,
ALTERNATING of Voltage Sources and HP ,Agilent By Direct/
CURRENT (< 1 GHZ) meters) Comparison Method
(Measure)

31 ELECTRO- AC Voltage 1mV to 20 kHz to 100 kHz 0.012% to 0.3% Using AC Std. Fluke
TECHNICAL- 22mV( For calibration 5790, 8508A DMM ,
ALTERNATING of Voltage Sources and HP ,Agilent By Direct/
CURRENT (< 1 GHZ) meters) Comparison Method
(Measure)

32 ELECTRO- AC Voltage 22 mV to 10 Hz to 10 kHz 165 ppm to 33 ppm Using AC Std. Fluke

TECHNICAL- 22 V ( for calibration of 5790, 8508A DMM ,
ALTERNATING Voltage sources and HP ,Agilent By Direct /
CURRENT (< 1 GHZ) meters) Comparison Method
(Measure)

33 ELECTRO- AC Voltage 22 mV to 10 kHz to 1 MHz 28 ppm to 3300 ppm Using AC Std. Fluke
TECHNICAL- 22 V ( For calibration of 5790, 8508A DMM ,
ALTERNATING Voltage Sources and HP ,Agilent By Direct /
CURRENT (< 1 GHZ) meters) comparison Method
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 50 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

34 ELECTRO- AC Voltage 22 V to 220 10 Hz to 100 KHz 28 ppm to 100 ppm Using AC Std. Fluke
TECHNICAL- V( For calibration of 5790, 8508A DMM ,
ALTERNATING Voltage Sources and HP ,Agilent By Direct/
CURRENT (< 1 GHZ) meters) Comparison Method
(Measure)

35 ELECTRO- AC Voltage 220 V to 10 Hz to 10 kHz 40 ppm to 85 ppm Using AC Std. Fluke

TECHNICAL- 1000 V( For calibration 5790, 8508A DMM ,
ALTERNATING of Voltage Sources and HP ,Agilent by Direct
CURRENT (< 1 GHZ) meters) /Comparison Method
(Measure)

36 ELECTRO- Capacitance , 1kHz ( 1 pF to 1000 pF 0.12% to 0.04% Using LCR Meter, By

TECHNICAL- for calibration of std Direct/ Comparison
ALTERNATING capacitors, LCR meter) Method
CURRENT (< 1 GHZ)
(Measure)

37 ELECTRO- Capacitance , 1kHz( 1000 pF to 100 µF 0.04% to 0.38% Using LCR Meter, by
TECHNICAL- For calibration of Direct / Comparison
ALTERNATING capacitors and LCR Method
CURRENT (< 1 GHZ) meters)
(Measure)

38 ELECTRO- CT-VT Comparator 63.5V to 110V RE:0.01% & Using Standard

TECHNICAL- (AITTS), VT ModeRatio PE:0.5Min. Capacitor/Voltage
ALTERNATING error & Phase error, Transformer with
CURRENT (< 1 GHZ) 50Hz Automatic Instrument
(Measure) transformer test set
(AITTS) By
Comparison Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 51 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

39 ELECTRO- CT-VT Comparator 1 A to 5 A RE:0.012% & Using Precision current

TECHNICAL- (AITTS),CT ModeRatio PE:0.54Min. transformer, Automatic
ALTERNATING error & Phase error, Instrument transformer
CURRENT (< 1 GHZ) 50Hz test set (AITTS) By
(Measure) Comparison Method

40 ELECTRO- Current Transformer 1% to 120% of Rated 5 RE : 0.03%, PE : 2.5 Using Precision current
TECHNICAL- Primary Injection A to 2000 A Min. transformer, Automatic
ALTERNATING method, Ratio error & Instrument transformer
CURRENT (< 1 GHZ) Phase error at 50Hz, test set (AITTS) and
(Measure) 1A & 5A (Secondary) High Current Source

41 ELECTRO- Current 1% to 120% of Rated RE:0.12% to Using Precision current

TECHNICAL- TransformerPrimary 1A to 5A 0.46%;PE: 6.2 to 17min transformer, Automatic
ALTERNATING Injection method, Ratio Instrument transformer
CURRENT (< 1 GHZ) error & Phase error, test set (AITTS) and
(Measure) 50Hz,1A, High Current Source
5A(Secondary) By Direct Method

42 ELECTRO- Current 1% to 120% of Rated RE:0.056 % to Using Precision current

TECHNICAL- TransformerPrimary 2000A to 3200 A 0.067%;PE: 3 to 5.64 transformer, Automatic
ALTERNATING Injection method, Ratio min Instrument transformer
CURRENT (< 1 GHZ) error & Phase error, test set (AITTS) and
(Measure) 50Hz,1A,5A(Secondary High Current Source
) By Direct Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 52 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

43 ELECTRO- Harmonics in Current 1st order to 40th order 0.8% Using 3 Phase
TECHNICAL- ,Fundamental Reference Standard
ALTERNATING Frequency 50 Hz 10 COM 3003 / SY-3102
CURRENT (< 1 GHZ) mA to 24 A ( For By Direct/ Comparison
(Measure) calibrationof Harmonic Method
analysers and
generators)

44 ELECTRO- Harmonics in Voltage 1 st order to 40 th order 0.4% Using 3 Phase

TECHNICAL- ,Fundamental reference Standard SY-
ALTERNATING Frequency 50 Hz 40 V 3102 By Direct
CURRENT (< 1 GHZ) to 240 V ( For /Comparison Method
(Measure) calibrationof Harmonics
analysers and
generators)

45 ELECTRO- Inductance , 1kHz ( for 100 µH to 1000µH 0.3% to 0.04% Using LCR Meter By
TECHNICAL- calibration of Inductors Direct / Comparison
ALTERNATING and LCR meters) Method
CURRENT (< 1 GHZ)
(Measure)

46 ELECTRO- Inductance , 1kHz ( For 1000 µH to 10 H 0.04% to 0.06% Using LCR Meter By
TECHNICAL- calibration of Inductors Direct/ Comparison
ALTERNATING and LCR meters) Method
CURRENT (< 1 GHZ)
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 53 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

47 ELECTRO- Potential Transformer / 120% to 80% of Rated RE:0.14% & PE: 7Min. Using Standard
TECHNICAL- Capacitor Voltage 110 V to 3.3 kV Voltage Transformer,
ALTERNATING Transformer/Voltage EPD with capacitor
CURRENT (< 1 GHZ) Divider Primary 33kV with Automatic
(Measure) Injection Method, Ratio instrument transformer
error & Phase error, test set (AITTS),and
50Hz, 63.5V/110V High Voltage Source
Secondary (50V - By Direct Method
144V)

48 ELECTRO- Potential Transformer / 120%to 80% of Rated RE:0.12% &; PE:7 Min. Using Standard
TECHNICAL- Capacitor Voltage 66 kV/Root(3) to 66 Voltage Transformer
ALTERNATING Transformer/Voltage kV/Root(3) 66kV with Automatic
CURRENT (< 1 GHZ) DividerPrimary instrument transformer
(Measure) Injection Method, Ratio test set (AITTS),and
error & Phase error, High Voltage Source
50Hz,110V/Root(3) By Direct Method
Secondary (50V -
144V)

49 ELECTRO- Potential Transformer / 120% to 80% of Rated RE:0.07% & PE:3 Min. Using EPD and
TECHNICAL- Capacitor Voltage 3.3 kV/Root(3) to 33 Capacitor 33kV,
ALTERNATING Transformer/Voltage kV/Root(3) Standard Voltage
CURRENT (< 1 GHZ) DividerPrimary Transformer with
(Measure) Injection Method, Ratio Automatic instrument
error & Phase error, transformer test set
50Hz, 63.5V/110V (AITTS),and High
Secondary ( 50V - Voltage Source By
144V) Direct Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 54 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

50 ELECTRO- Potential Transformer / 120%to80% of Rated RE:0.14% & PE:7 Min. Using Standard
TECHNICAL- Capacitor Voltage 110 V/Root(3) to 3.3 Voltage Transformer,
ALTERNATING Transformer/Voltage kV/Root(3) EPD with capacitor
CURRENT (< 1 GHZ) DividerPrimary 33kV with Automatic
(Measure) Injection Method, Ratio instrument transformer
error & Phase error, test set (AITTS),and
50Hz, 63.5V/110V High Voltage Source
Secondary (50V - By Direct Method
144V)

51 ELECTRO- Potential Transformer / 120% to 80% of Rated RE:0.07% & PE:3Min. Using EPD and
TECHNICAL- Capacitor Voltage 3.3 kV to 33 kV Capacitor 33kV,
ALTERNATING Transformer/Voltage Standard Voltage
CURRENT (< 1 GHZ) Divider, Primary Transformer with
(Measure) Injection Method, Ratio Automatic instrument
error & Phase error, transformer test set
50Hz, 63.5V/110V (AITTS),and High
Secondary ( 50V - Voltage Source By
144V) Direct Method

52 ELECTRO- Power Factor 40 Hz to 0.01 PF to 1 PF 0.0005 PF Using 3 Phase

TECHNICAL- 70 Hz ( For calibration lead/lag Reference Standard
ALTERNATING of Phase shifters and COM 3003/SY3102 by
CURRENT (< 1 GHZ) PF meters) Direct / Comparison
(Measure) Method

53 ELECTRO- Voltage Ratio 0.8 Turn to 2021 Turn 0.04% to 0.05% Using Fluke
TECHNICAL- 8508A/Agilent/ HP By
ALTERNATING Direct Method
CURRENT (< 1 GHZ)
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 55 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

54 ELECTRO- AC Current 10 Hz to 10 10 µA to 20 A 0.11% to 0.017% Fluke 5720A MFC with

TECHNICAL- kHZ Amplifier by Direct
ALTERNATING Method
CURRENT (< 1 GHZ)
(Source)

55 ELECTRO- AC Current 40 Hz to 70 1 mA to 100 A 0.045% to 0.16% Using Fluke 5720

TECHNICAL- Hz /52120 Amplifier
ALTERNATING
CURRENT (< 1 GHZ)
(Source)

56 ELECTRO- AC Current 50 Hz 120A to 1000 A 0.45% to 0.45% MFC 9100 with Current
TECHNICAL- Coil by Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Source)

57 ELECTRO- AC Power ,320V-600 16 W to 12 kW 0.16% / PF to ( Related MFC Fluke 5080 A by

TECHNICAL- V, 0.5A - 20 A, PF ± to Apparent Power) Direct Method
ALTERNATING 0.1 to 11 phase
CURRENT (< 1 GHZ)
(Source)

58 ELECTRO- AC Voltage 20 kHz to 1 10 mV to 20 V 6500 ppm to 120 ppm Using MFC Fluke
TECHNICAL- MHz 5720A /9100/5080A By
ALTERNATING Direct Method
CURRENT (< 1 GHZ)
(Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 56 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

59 ELECTRO- AC Voltage 50 Hz to 1 200 V to 1100 V 120 ppm to 65 ppm Using MFC Fluke
TECHNICAL- kHz 5720A /9100/5080A By
ALTERNATING Direct Method
CURRENT (< 1 GHZ)
(Source)

60 ELECTRO- AC Voltage 50 Hz to 20 1 mV to 20 mV 4800 ppm to 300 ppm Using MFC Fluke

TECHNICAL- KHz 5720A /9100/5080A By
ALTERNATING Direct Method
CURRENT (< 1 GHZ)
(Source)

61 ELECTRO- AC Voltage 50 Hz to 20 20 mV to 200 mV 300 ppm to 120 ppm Using MFC Fluke
TECHNICAL- KHz 5720A /9100/5080A By
ALTERNATING Direct Method
CURRENT (< 1 GHZ)
(Source)

62 ELECTRO- AC Voltage 50 Hz to 20 200 mV to 200 V 120 ppm to 59 ppm Using MFC Fluke
TECHNICAL- KHz 5720A /9100/5080A By
ALTERNATING Direct Method
CURRENT (< 1 GHZ)
(Source)

63 ELECTRO- Capacitance 1kHz 1000 pF to 100 µF 0.35% to 0.7% Using MFC 9100 by
TECHNICAL- Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 57 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

64 ELECTRO- Capacitance 1kHz 500 pF to 1000 pF 0.35% Using MFC 9100 by

TECHNICAL- Direct Method
ALTERNATING
CURRENT (< 1 GHZ)
(Source)

65 ELECTRO- Inductance 1kHz 100 µH to 1000 µH 0.3% to 0.04% Using Decade

TECHNICAL- Inductance box by
ALTERNATING Direct Method
CURRENT (< 1 GHZ)
(Source)

66 ELECTRO- Inductance 1kHz 1000 µH to 10 H 0.04% to 0.06% Using Decade

TECHNICAL- Inductance box by
ALTERNATING Direct Method
CURRENT (< 1 GHZ)
(Source)

67 ELECTRO- Voltage Ratio 0.8 Turn to 2021 Turn 0.05% to 0.08% Amber make Ratio
TECHNICAL- Standard by Direct
ALTERNATING Method
CURRENT (< 1 GHZ)
(Source)

68 ELECTRO- DC Current 20 A to 100 A 0.05% to 0.5% Using Fluke 8508A

TECHNICAL- DIRECT DMM , osaw Resistor
CURRENT (Measure) Fluke 40B By Direct
Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 58 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

69 ELECTRO- DC Current ( For 100 µA to 100 mA 20 ppm to 30 ppm Using Fluke 8508A
TECHNICAL- DIRECT calibration of Current DMM , Agilent, Shunt
CURRENT (Measure) Sources, Meters, Fluke 40B by Direct /
Shunts) Comparison by V/R
Method

70 ELECTRO- DC Current ( For 1µA to 100 µA 460 ppm to 20 ppm Using Fluke 8508A
TECHNICAL- DIRECT calibration of Current DMM , Agilent, Shunt
CURRENT (Measure) Sources, Shunts and Fluke 40B By Direct /
meters) Comparison /V/R
Method

71 ELECTRO- DC Current ( For 100 mA to 20 A 30 ppm to 50 ppm Using Fluke 8508A

TECHNICAL- DIRECT calibration of Current DMM , Agilent, Shunt
CURRENT (Measure) Sources, Shunts and Fluke 40B By Direct /
metrs) comparison & V/I
Method

72 ELECTRO- DC Current (For 0.05 nA to 1 µA 3 % to 0.25 % Using PA meter

TECHNICAL- DIRECT calibration of Current Keithley 6485 by Direct
CURRENT (Measure) Sources, Meters ) / comparison Method
Method

73 ELECTRO- DC Power ,1.5 V-1000 0.15 W to 20 kW 0.011% to 0.055% Using Fluke

TECHNICAL- DIRECT V ,0.1 A to 20 A 8508A/5080A,
CURRENT (Measure) Yokogawa & 6 ½ DMM
By Direct / Comparison
Method

74 ELECTRO- DC Resistance 0.001 ohm to 1 ohm 0.02% Using Std. Resistance

TECHNICAL- DIRECT By Direct / VI Method
CURRENT (Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 59 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

75 ELECTRO- DC Resistance 0.1mohm to 1 mohm 0.032% Using Fluke 5720 A

TECHNICAL- DIRECT and 8508 A by V/I
CURRENT (Measure) Method

76 ELECTRO- DC Resistance 1 MOhm to 100 MOhm 11 ppm to 160 ppm Using Fluke 8508A
TECHNICAL- DIRECT DMM , 5720 A By
CURRENT (Measure) Direct / VI Method

77 ELECTRO- DC Resistance 1 Ohm to 1 MOhm 19 ppm to 11 ppm Using Fluke 8508A

TECHNICAL- DIRECT DMM , 5720 A By
CURRENT (Measure) Direct / VI Method

78 ELECTRO- DC Resistance 100 MOhm to 20 160 ppm to 1800 ppm Using Fluke 8508A
TECHNICAL- DIRECT GOhm DMM , 5720 A By
CURRENT (Measure) Direct / VI Method

79 ELECTRO- DC Resistance 20 GOhm to 10 TOhm 1 % to 2 % Using pA Meter/ Fluke

TECHNICAL- DIRECT 5080A Direct by V / I
CURRENT (Measure) Method

80 ELECTRO- DC Voltage ( for 1 kV to 30kV 2.5 % Using HV Probe with

TECHNICAL- DIRECT calibration of HV DMM & Source by
CURRENT (Measure) Sources and Probes) Direct / Comparison
Method

81 ELECTRO- DC Voltage ( For 1 mV to 10 V 200 ppm to 4 ppm Using Fluke 8508A

TECHNICAL- DIRECT calibration of Sources DMM , HP ,Agilent by
CURRENT (Measure) and meters) Direct/ Comparison
Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 60 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

82 ELECTRO- DC Voltage ( for 10 V to 1000 V 4 ppm to 8 ppm Using Fluke 8508A

TECHNICAL- DIRECT calibration of Sources DMM , HP ,Agilent by
CURRENT (Measure) and meters) Direct/ Comparison
Method

83 ELECTRO- DC Current 1 µA to 100 µA 0.61% to 0.02% Using Fluke 5720A

TECHNICAL- DIRECT /5080A by Direct
CURRENT (Source) Method

84 ELECTRO- DC Current 100 µA to 20 A 200ppm Using Fluke 5720A

TECHNICAL- DIRECT /52120A by Direct
CURRENT (Source) Method

85 ELECTRO- DC Current 100 A to 1000 A 0.45 % Using Fluke 5720A with

TECHNICAL- DIRECT Amplifier /9100/
CURRENT (Source) 5080A/52120A &
Current Coil by Direct
Method

86 ELECTRO- DC Current 20 A to 100 A 200 ppm to 360 ppm Using Fluke 5720A with
TECHNICAL- DIRECT Amplifier 52120A by
CURRENT (Source) Direct Method

87 ELECTRO- DC Power ,1.5 V-1000 0.15 W to 20 kW 0.011% to 0.055% Using Fluke MFC
TECHNICAL- DIRECT V ,0.1 A to 20 A 5080A by Direct
CURRENT (Source) Method

88 ELECTRO- DC Resistance 0.1mohm to 0.1mohm 0.012% Using Standard

TECHNICAL- DIRECT Resistance by Direct
CURRENT (Source) method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 61 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

89 ELECTRO- DC Resistance 1 mohm to 1 mohm 0.012% Using Standard

TECHNICAL- DIRECT Resistance by Direct
CURRENT (Source) Method

90 ELECTRO- DC Resistance 1 MOhm to 100 MOhm 22 ppm to 120 ppm Using Fluke
TECHNICAL- DIRECT 5720A/5080A / 9100 by
CURRENT (Source) Direct Method

91 ELECTRO- DC Resistance 1 Ohm to 19 Ohm 125 ppm to 100 ppm Using Fluke
TECHNICAL- DIRECT 5720A/5080A / 9100 by
CURRENT (Source) Direct Method

92 ELECTRO- DC Resistance 10 mOhm to 10 mOhm 0.012% Using Standard

TECHNICAL- DIRECT Resistance by Direct
CURRENT (Source) Method

93 ELECTRO- DC Resistance 100 mOhm to 100 0.012% Using Standard

TECHNICAL- DIRECT mOhm Resistance by Direct
CURRENT (Source) Method

94 ELECTRO- DC Resistance 100 MOhm to 400 65 ppm to 900 ppm Using MFC 9100 by
TECHNICAL- DIRECT MOhm Direct Method
CURRENT (Source)

95 ELECTRO- DC Resistance 19 Ohm to 1 MOhm 100 ppm to 22 ppm Using Fluke

TECHNICAL- DIRECT 5720A/5080 / 9100 by
CURRENT (Source) Direct Method

96 ELECTRO- DC Voltage 1 mV to 100 mV 470 ppm to 11 ppm Using MFC Fluke

TECHNICAL- DIRECT 5720A By Direct
CURRENT (Source) Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 62 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

97 ELECTRO- DC Voltage 10 V to 1100 V 4.72 ppm to 9.7 ppm Using MFC Fluke
TECHNICAL- DIRECT 5720A /9100/5080A By
CURRENT (Source) Direct Method

98 ELECTRO- DC Voltage 100 mV to 10 V 11 ppm to 4.72 ppm Using MFC Fluke

TECHNICAL- DIRECT 5720A /9100/5080A By
CURRENT (Source) Direct Method

99 ELECTRO- Insulation Resistance 10 kOhm to 18 GOhm 0.2% to 1.5% Using Fluke 5080A
TECHNICAL- DIRECT MEG with 10 kV divider
CURRENT (Source) by Direct Method

100 ELECTRO- Insulation Resistance 10 GOhm to 10 TOhm 1.5% to 2.5% Using Fluke 5080A
TECHNICAL- DIRECT up to 10kV MEG with 10 kV divider
CURRENT (Source) by Direct Method

101 ELECTRO- RF Power,10MHz-3 1 µW to 20 mW ( -60 0.51dB to 0.86dB Using R&S Meter By

TECHNICAL- GHz,( -60 dBm to +13 dBm to +13 dBm) Direct / Comparison
RF/MICROWAVE (1 dBm) Method
GHZ AND ABOVE)
(Measure)

102 ELECTRO- RF Voltage ,10MHz- 7 mV to 1 V 4.1% Using R&S RF

TECHNICAL- 3GHz Voltmeter URV 55 By
RF/MICROWAVE (1 Direct Method
GHZ AND ABOVE)
(Measure)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 63 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

103 ELECTRO- RF Power 10 MHz to 1 1 µW to 20 mW ( -60 0.48dB Using HP Signal

TECHNICAL- GHz (-60dBm to +13 dBm to +13 dBm) Generator by Direct
RF/MICROWAVE (1 dBm) Method
GHZ AND ABOVE)
(Source)

104 ELECTRO- RF Voltage 10 MHz to 7mV to 1 V 1 % to 4.1% Using Leveled Sine

TECHNICAL- 1 GHz Generator and 9100
RF/MICROWAVE (1 MFC By Direct Method
GHZ AND ABOVE)
(Source)

105 ELECTRO- Temp. (-) 600°C to 1800 °C 0.03 °C Using Fluke 8508 A by
TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller B Type
(Measure) Thermocouple

106 ELECTRO- Temp. (-)400°C to 2320 °C 0.06 °C Using Fluke 8508 A by

TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller C Type
(Measure) Thermocouple

107 ELECTRO- Temp. (-)250°C to 1000 °C 0.023 °C Using Fluke 8508 A by

TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller E Type
(Measure) Thermocouple

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 64 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

108 ELECTRO- Temp. (-)200°C to 1200 °C 0.018 °C Using Fluke 8508 A by

TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller J Type
(Measure) Thermocouple

109 ELECTRO- Temp. (-)200°C to 1370 °C 0.014 °C Using Fluke 8508 A by

TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller K Type
(Measure) Thermocouple

110 ELECTRO- Temp. (-)200°C to 1300 °C 0.02 °C Using Fluke 8508 A by

TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller L Type
(Measure) Thermocouple

111 ELECTRO- Temp. (-)200°C to 1300 °C 0.028 °C Using Fluke 8508 A by

TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller N Type
(Measure) Thermocouple

112 ELECTRO- Temp. (-)50°C to 1770 °C 0.03 °C Using Fluke 8508 A by

TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller R Type
(Measure) Thermocouple

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 65 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

113 ELECTRO- Temp. (-)200°C to 850 °C 0.017 °C Using Fluke 8508 A by

TECHNICAL- SimulationProcess Direct Method
TEMPERATURE Calibrator/Recorder
SIMULATION /Controller RTD/PRT
(Measure) Type Thermocouple

114 ELECTRO- Temp. (-)50°C to 1770 °C 0.03 °C Using Fluke 8508 A

TECHNICAL- SimulationProcess /Agilent by Direct /
TEMPERATURE Calibrator/Recorder Simulation Method
SIMULATION /Controller S Type
(Measure) Thermocouple

115 ELECTRO- Temp. (-)200°C to 400 °C 0.018 °C Using Fluke 8508 A

TECHNICAL- SimulationProcess /Agilent by Direct /
TEMPERATURE Calibrator/Recorder Simulation Method
SIMULATION /Controller T Type
(Measure) Thermocouple

116 ELECTRO- Temperature (-) 600°C to 1800 °C 0.06 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100 by
TEMPERATURE ontroller)B Type Direct Method
SIMULATION (Source) Thermocouple

117 ELECTRO- Temperature (-)400°C to 2320 °C 0.03 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100by
TEMPERATURE ontroller)C Type Direct Method
SIMULATION (Source) Thermocouple

118 ELECTRO- Temperature (-) 250°C to 1000 °C 0.08 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100 by
TEMPERATURE ontroller)E Type Direct Method
SIMULATION (Source) Thermocouple

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 66 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

119 ELECTRO- Temperature (-) 200°C to 1200 °C 0.011 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100 by
TEMPERATURE ontroller)J Type Direct Method
SIMULATION (Source) Thermocouple

120 ELECTRO- Temperature (-)200°C to 1370 °C 0.013 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100 by
TEMPERATURE ontroller)K Type Direct Method
SIMULATION (Source) Thermocouple

121 ELECTRO- Temperature (-)200°C to 1300 °C 0.011 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100 by
TEMPERATURE ontroller)L Type Direct Method
SIMULATION (Source) Thermocouple

122 ELECTRO- Temperature (-)200°C to 1300 °C 0.02 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100 by
TEMPERATURE ontroller)N Type Direct Method
SIMULATION (Source) Thermocouple

123 ELECTRO- Temperature (-)50°C to 1770 °C 0.07 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100 by
TEMPERATURE ontroller)R Type Direct Method
SIMULATION (Source) Thermocouple

124 ELECTRO- Temperature (-)200°C to 850 °C 0.009 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100/ by
TEMPERATURE ontroller)RTD/PRT Direct Method
SIMULATION (Source)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 67 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

125 ELECTRO- Temperature (-)50°C to 1770 °C 0.07 °C Using Fluke

TECHNICAL- Simulation(Recorder/C 5720/5080A/9100 by
TEMPERATURE ontroller)S Type Direct / Method
SIMULATION (Source) Thermocouple

126 ELECTRO- Temperature (-)200°C to 400 °C 0.02°C Using Fluke 5720/9100

TECHNICAL- Simulation(Recorder/C by Direct Method
TEMPERATURE ontroller)T Type
SIMULATION (Source) Thermocouple

127 ELECTRO- Frequency ( For 40 Hz to 70 Hz 0.025 % Using 3 Phase

TECHNICAL- TIME & calibration of Freq reference Standard
FREQUENCY Sources and meters) COM 3003/MTS by
(Measure) Direct/ Comparison
Method

128 ELECTRO- Frequency/period 1 Hz (1sec) to 3 GHz ( 4 .1 ppm to 0.1 ppm Using Fluke 8508A
TECHNICAL- TIME & 0.33 n sec) DMM , Agilent /Freq.
FREQUENCY Counter/ 9100 By
(Measure) Direct / Comparison
Method

129 ELECTRO- Time Interval 10 nsec. to 100000 0.11ppm to 6.02ppm Using Frequency
TECHNICAL- TIME & sec. Counter CNT90 by
FREQUENCY Comparison method
(Measure)

130 ELECTRO- Frequency/Period 1 Hz to 1 GHz( 1sec to 30 ppm to 5 ppm Using MFC 9100 and
TECHNICAL- TIME & 1nsec) HP Signal Generator
FREQUENCY (Source) by Direct Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 68 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

131 ELECTRO- Time Interval 10 nsec. to 100000 26ppm MFC 9100 by Direct
TECHNICAL- TIME & sec. Method
FREQUENCY (Source)

132 FLUID FLOW- FLOW Cumulative Mass of 100 kg to 10000kg 0.068 % rdg Using Mass Flow Meter
MEASURING Fluid (Medium:Water) by Comparison Method
DEVICES

133 FLUID FLOW- FLOW Mass flow 0.1kg/min to 833 0.07 % of rdg Using Mass Flow Meter
MEASURING rate(Medium:Water) kg/min by Comparison Method
DEVICES

134 FLUID FLOW- FLOW Quantity of 0.1 m³ to 10 m³ 0.08% rdg Using Mass,Volume
MEASURING Volume(Medium:Water Flow Meter by
DEVICES ) Comparison Method

135 FLUID FLOW- FLOW Volume Flow Rate 0.06 m³/h to 50 m³/h 0.09 % rdg Using Mass Flow Meter
MEASURING (Medium:Water) by Comparison Method
DEVICES

136 FLUID FLOW- FLOW Volume Flow Rate 1 m³/h to 70 m³/h 1 % rdg Using Ultrasonic Flow
MEASURING (Medium:Water) meter by Comparison
DEVICES Method

137 FLUID FLOW- FLOW Volume Flow Rate 70 m³/h to 2300 m³/h 1% of rdg Using UltraSonic Flow
MEASURING (Medium:Water) Meter by Comparison
DEVICES Method

138 MECHANICAL- SPEED (Non-contact 100 rpm to 6000 rpm 5 rpm Using Tachometer
ACCELERATION AND type)RPM indicators,
SPEED Centrifuges

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 69 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

139 MECHANICAL- Barometers 300 mbar to 1200 mbar 0.052% of rdg Using Precision Digital
PRESSURE Gauges
INDICATING DEVICES

140 MECHANICAL- Digital/Analog Pressure 0 bar to 700 bar 0.034% rdg Using Precision Digital
PRESSURE Gauges, Pressure Gauges By
INDICATING DEVICES Transmitters Comparison Method

141 MECHANICAL- Digital/Analog Pressure 0 bar to 2 bar 0.082% rdg Using Precision Digital
PRESSURE Gauges,Transmitters Gauges
INDICATING DEVICES

142 MECHANICAL- Pressure Gauges, 0 bar to 2 bar Abs 0.069% rdg Using Precision Digital
PRESSURE Absolute gauge Gauge
INDICATING DEVICES

143 MECHANICAL- Vacuum Gauges, (-) 0.93 bar to 0 bar 0.07% rdg Using Precision Digital
PRESSURE Transducers,Transmitt Gauges
INDICATING DEVICES er

144 MECHANICAL- Balance (Class I - Up to 220 g 0.13mg Using Standard

WEIGHING SCALE Class Weights E1/E2
AND BALANCE IV),Readability:0.01mg /F1/F2/M1

145 MECHANICAL- Balance (Class I - Up to 38 kg 0.71 g Using Standard

WEIGHING SCALE Class Weights E1/E2
AND BALANCE IV),Readability:10mg /F1/F2/M1

146 MECHANICAL- Balance (Class I - Upto100kg 2.4 g Using Standard

WEIGHING SCALE Class Weights E1/E2
AND BALANCE IV),Readability:1g /F1/F2/M1

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 70 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

147 MECHANICAL- Balance (Class I - Up to 8 kg 0.01 g Using Standard

WEIGHING SCALE Class Weights E1/E2
AND BALANCE IV),Readability:1mg /F1/F2/M1

148 THERMAL- SPECIFIC Humidity Sensor With 20 % RH to 90 % RH 0.8% RH Using Standard

HEAT & HUMIDITY Indicator/Controller,The @ 25°C Humidity Indicator with
rmo Hygrometer sensor and humidity
Chamber / Generator
By Comparison Method

149 THERMAL- SPECIFIC Humidity Sensor With 20 °C to 50 °C 0.45 °C Using Standard PRT
HEAT & HUMIDITY Indicator/Controller,The @50%RH PT-100 sensor with
rmo Hygrometer Indicator Chamber /
Generator By
Comparison Method

150 THERMAL- Indicator of bath / 1200 °C to 1600 °C 4.6 °C Using S type

TEMPERATURE furnace Thermocouple with
Indicator by
comparison method at
single specified
location

151 THERMAL- Indicator of (-) 80 °C to 200 °C 0.14 °C Using SSPRT with

TEMPERATURE deepfreeze/bath/oven. Indicator, DMM, by
Comparison Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 71 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

152 THERMAL- Oven, Furnace, (-)35°C to 400 °C 0.7 °C Using Multi Channel
TEMPERATURE Temp.Bath/Deep Data Logger with RTD
Freezer (Thermal & N Type
Mapping ) Thermocouple (
minimum nine
locations) by mapping
method.

153 THERMAL- Oven, Furnace, 400°C to 1200 °C 3.0 °C Using Multi Channel
TEMPERATURE Temp.Bath/Deep Data Logger with RTD
Freezer (Thermal & N Type
Mapping) Thermocouple (
minimum nine
locations) by mapping
method.

154 THERMAL- Pyrometer, Black Body 50 °C to 500 °C 2.86 °C Using Std. Non Contact
TEMPERATURE Source ,IR Pyrometer & Black
Thermometer. body
Source(Emissivity:0.95)
By Comparison Method

155 THERMAL- Pyrometer, Black Body 500 °C to 1200 °C 3.9 °C Using Std. Non Contact
TEMPERATURE Source, IR Pyrometer & Black
Thermometer body
Source(Emissivity:0.95)
By Comparison Method

This is annexure to 'Certificate of Accreditation' and does not require any signature.
 Laboratory Name C AND I CALIBRATIONS PVT. LTD., J-448, SITAPURA INDUSTRIAL AREA, JAIPUR,
RAJASTHAN , INDIA

Accreditation Standard ISO/IEC 17025:2017

Certificate Number CC-2216 Page No. : 72 / 72

Validity 15/11/2019 to 14/11/2021 Last Amended on -

S.No Discipline / Group Measurand or Measurement range * Calibration and Calibration or

Reference and additional Measurement Measurement
Material/Type of parameters where Capability(CMC)(±) Method or
instrument or applicable(Range procedure
material to be and Frequency)
calibrated or
measured / Quantity
Measured /
Instrument
Site Facility

156 THERMAL- RTD sensor 200°C to 650 °C 0.13°C Using Liquid Bath, Dry
TEMPERATURE /Thermocouple with OR Block Calibrator
without Indicator, SSPRT with Indicator,
Analog Temp Gauge DMM, by Comparison
Indicator of bath/oven. Method

157 THERMAL- RTD, Thermocouple 500 °C to 1000 °C 1.91 °C Using S Type

TEMPERATURE Sensors with or without Thermocouple with
Indicator, Analog Temp Indicator, DMM, Dry
Gauge,Indicator of block calibrator by
temperature comparison method.
oven/bath/furnace.

158 THERMAL- Thermocouple Sensors 1000 °C to 1200 °C 2.04 °C Using S Type

TEMPERATURE with or without Thermocouple with
Indicator, Analog Temp Indicator / DMM , Dry
Gauge,Indicator of block calibrator by
temperature comparison method.
bath/furnace

* CMCs represent expanded uncertainties expressed at approximately the 95% level of confidence, using a coverage factor of k = 2.

This is annexure to 'Certificate of Accreditation' and does not require any signature.