A

MINI PROJECT

REPORT ON

"SOLAR POWERED MULTIPURPOSE SPRAYER FOR AGRICULTURE"

Dissertation submitted in partial fulfilment of the requirement for the award of the degree of

BACHELOR OF TECHNOLOGY
IN

MECHANICAL ENGINEERING
By
A. MALAVIKA 23QT5A0306

Under the esteemed guidance of

Ms. V. DIVYA M.Tech.

Asst. Professor

DEPARTMENT OF MECHANICAL ENGINEERING

KLR COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE New Delhi & Affiliated to JNTUH, Hyderabad)
Palvoncha, Bhadradri Kothagudem Dist-507 115 –T.S
(Academic Year :2021-2025)
 A
MINI PROJECT

REPORT ON

"SOLAR POWERED MULTIPURPOSE SPRAYER FOR AGRICULTURE"

Dissertation submitted in partial fulfilment of the requirement for the award of the degree of

BACHELOR OF TECHNOLOGY
IN

MECHANICAL ENGINEERING
By
K. TEJA MANIKANTA 23QT5A0307

Under the esteemed guidance of

Ms. V. DIVYA M.Tech.

Asst. Professor

DEPARTMENT OF MECHANICAL ENGINEERING

KLR COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE New Delhi & Affiliated to JNTUH, Hyderabad)
Palvoncha, Bhadradri Kothagudem Dist-507 115 –T.S
(Academic Year :2021-2025)
 A
MINI PROJECT

REPORT ON

"SOLAR POWERED MULTIPURPOSE SPRAYER FOR AGRICULTURE"

Dissertation submitted in partial fulfilment of the requirement for the award of the degree of

BACHELOR OF TECHNOLOGY
IN

MECHANICAL ENGINEERING
By
23QT5A0301
K. REVANTH

Under the esteemed guidance of

Ms. V. DIVYA M.Tech.

Asst. Professor

DEPARTMENT OF MECHANICAL ENGINEERING

KLR COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE New Delhi & Affiliated to JNTUH, Hyderabad)
Palvoncha, Bhadradri Kothagudem Dist-507 115 –T.S
(Academic Year :2021-2025)
 A
MINI PROJECT

REPORT ON

"SOLAR POWERED MULTIPURPOSE SPRAYER FOR AGRICULTURE"

Dissertation submitted in partial fulfilment of the requirement for the award of the degree of

BACHELOR OF TECHNOLOGY
IN

MECHANICAL ENGINEERING
By
K. SAI GANESH 22QT1A0308

Under the esteemed guidance of

Ms. V. DIVYA M.Tech.
Asst. Professor

DEPARTMENT OF MECHANICAL ENGINEERING

KLR COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE New Delhi & Affiliated to JNTUH, Hyderabad)
Palvoncha, Bhadradri Kothagudem Dist-507 115 –T.S
(Academic Year :2021-2025)
 KLR COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE New Delhi & Affiliated to JNTUH, Hyderabad)
Palvoncha, Bhadradri Kothagudem Dist-507 115 –T.S

DEPARTMENT OF MECHANICAL ENGINEERING

C E RTIFI CATE
This is to certify that the Mini Project Report entitled

"SOLAR POWERED MULTIPURPOSE SPRAYER FOR AGRICULTURE"

That is being submitted
By

A. MALAVIKA 23QT5A0306

In partial fulfilment for the award of the degree of Bachelor of Technology in Mechanical Engineering
from the Jawaharlal Nehru Technological University, Hyderabad. This is a bonafide work carried out by
them under our guidance and supervision. The results presented in this dissertation have been verified and
are found to be satisfactory. The results embodied in this dissertation have not been submitted to any other
University or Institute for the award of any other post-graduation.

INTERNAL GUIDE HEAD OF THE DEPARTMENT

Ms. V. DIVYA M.Tech. MR. M. MURTHY REDDY M.Tech.,(Ph.D)

Department of Mechanical Engineering Department of Mechanical Engineering

EXTERNAL EXAMINER PRINCIPAL

 KLR COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE New Delhi & Affiliated to JNTUH, Hyderabad)
Palvoncha, Bhadradri Kothagudem Dist-507 115 –T.S

DEPARTMENT OF MECHANICAL ENGINEERING

C E RTIFI CATE
This is to certify that the Mini Project Report entitled

"SOLAR POWERED MULTIPURPOSE SPRAYER FOR AGRICULTURE"

That is being submitted
By

K. TEJA MANIKANTA 23QT5A0307

In partial fulfilment for the award of the degree of Bachelor of Technology in Mechanical Engineering
from the Jawaharlal Nehru Technological University, Hyderabad. This is a bonafide work carried out by
them under our guidance and supervision. The results presented in this dissertation have been verified and
are found to be satisfactory. The results embodied in this dissertation have not been submitted to any other
University or Institute for the award of any other post-graduation.

INTERNAL GUIDE HEAD OF THE DEPARTMENT

Ms. V. DIVYA M.Tech. MR. M. MURTHY REDDY M.Tech.,(Ph.D)

Department of Mechanical Engineering Department of Mechanical Engineering

EXTERNAL EXAMINER PRINCIPAL

 KLR COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE New Delhi & Affiliated to JNTUH, Hyderabad)
Palvoncha, Bhadradri Kothagudem Dist-507 115 –T.S

DEPARTMENT OF MECHANICAL ENGINEERING

C E RTIFI CATE
This is to certify that the Mini Project Report entitled

"SOLAR POWERED MULTIPURPOSE SPRAYER FOR AGRICULTURE"

That is being submitted
By

K. REVANTH 23QT5A0301

In partial fulfilment for the award of the degree of Bachelor of Technology in Mechanical Engineering
from the Jawaharlal Nehru Technological University, Hyderabad. This is a bonafide work carried out by
them under our guidance and supervision. The results presented in this dissertation have been verified and
are found to be satisfactory. The results embodied in this dissertation have not been submitted to any other
University or Institute for the award of any other post-graduation.

INTERNAL GUIDE HEAD OF THE DEPARTMENT

Ms. V. DIVYA M.Tech. MR. M. MURTHY REDDY M.Tech.,(Ph.D)

Department of Mechanical Engineering Department of Mechanical Engineering

EXTERNAL EXAMINER PRINCIPAL

 KLR COLLEGE OF ENGINEERING AND TECHNOLOGY
(Approved by AICTE New Delhi & Affiliated to JNTUH, Hyderabad)
Palvoncha, Bhadradri Kothagudem Dist-507 115 –T.S

DEPARTMENT OF MECHANICAL ENGINEERING

C E RTIFI CATE
This is to certify that the Mini Project Report entitled

"SOLAR POWERED MULTIPURPOSE SPRAYER FOR AGRICULTURE"

That is being submitted

By

K. SAI GANESH 22QT1A0308

In partial fulfilment for the award of the degree of Bachelor of Technology in Mechanical Engineering
from the Jawaharlal Nehru Technological University, Hyderabad. This is a bonafide work carried out by
them under our guidance and supervision. The results presented in this dissertation have been verified and
are found to be satisfactory. The results embodied in this dissertation have not been submitted to any other
University or Institute for the award of any other post-graduation.

INTERNAL GUIDE HEAD OF THE DEPARTMENT

Ms. V. DIVYA M.Tech. MR. M. MURTHY REDDY M.Tech.,(Ph.D)

Department of Mechanical Engineering Department of Mechanical Engineering

EXTERNAL EXAMINER PRINCIPAL

 ACKNOWLEDGEMENT

It is customary for a student to thank all those who have helped him to successfully
complete a project, particularly a different one, but we are doing so not because of the
monotonous tradition but because they are genuinely entitled to our heart full thanks.
I am highly indebted to Smt. K.NAGAMANI, Chairperson,KLR College of
Engineering & Technology, Paloncha.
We are very much grateful to MR. SIDDHARTH REDDY, secretary of
KLR college of engineering & technology, paloncha.
We are greatly obliged to our Principal Dr. K RAJENDRA PRASAD, Head of the
Department Mr. M. MURTHY REDDY, for creating an excellent academic Eli mate which
made this endeavour possible.

We would like to extend our sincere thanks to our guide, Ms. V. DIVYA
Asst. Professor for his keen interest, valuable suggestions and constant
encouragement throughout the project.

We are also thankful to the staff of department labs, KLR, PALVONCHA, for
providing us with the required tests and thankful to the library staff for providing journals and
academic books.

We take great pleasure in expressing deep gratitude to all those who guided us during
the project work.

Last but not the least, we wish to acknowledge our parents and friends for giving
moral strength and constant encouragement.

A. MALAVIKA 23QT5A0306

KLRCET DEPARTMENT OF MECHANICAL ENGINEERING

 ACKNOWLEDGEMENT

It is customary for a student to thank all those who have helped him to successfully
complete a project, particularly a different one, but we are doing so not because of the
monotonous tradition but because they are genuinely entitled to our heart full thanks.
I am highly indebted to Smt. K.NAGAMANI, Chairperson,KLR College of
Engineering & Technology, Paloncha.
We are very much grateful to MR. SIDDHARTH REDDY, secretary of
KLR college of engineering & technology, paloncha.
We are greatly obliged to our Principal Dr. K RAJENDRA PRASAD, Head of the
Department Mr. M. MURTHY REDDY, for creating an excellent academic Eli mate which
made this endeavour possible.

We would like to extend our sincere thanks to our guide, Ms. V. DIVYA
Asst. Professor for his keen interest, valuable suggestions and constant
encouragement throughout the project.

We are also thankful to the staff of department labs, KLR, PALVONCHA, for
providing us with the required tests and thankful to the library staff for providing journals and
academic books.

We take great pleasure in expressing deep gratitude to all those who guided us during
the project work.

Last but not the least, we wish to acknowledge our parents and friends for giving
moral strength and constant encouragement.

K. TEJA MANIKANTA
A. MALAVIKA 23QT5A0307
23QT5A0306

KLRCET DEPARTMENT OF MECHANICAL ENGINEERING

 ACKNOWLEDGEMENT

It is customary for a student to thank all those who have helped him to successfully
complete a project, particularly a different one, but we are doing so not because of the
monotonous tradition but because they are genuinely entitled to our heart full thanks.
I am highly indebted to Smt. K.NAGAMANI, Chairperson,KLR College of
Engineering & Technology, Paloncha.
We are very much grateful to MR. SIDDHARTH REDDY, secretary of
KLR college of engineering & technology, paloncha.
We are greatly obliged to our Principal Dr. K RAJENDRA PRASAD, Head of the
Department Mr. M. MURTHY REDDY, for creating an excellent academic Eli mate which
made this endeavour possible.

We would like to extend our sincere thanks to our guide, Ms. V. DIVYA
Asst. Professor for his keen interest, valuable suggestions and constant
encouragement throughout the project.

We are also thankful to the staff of department labs, KLR, PALVONCHA, for
providing us with the required tests and thankful to the library staff for providing journals and
academic books.

We take great pleasure in expressing deep gratitude to all those who guided us during
the project work.

Last but not the least, we wish to acknowledge our parents and friends for giving
moral strength and constant encouragement.

K. A.
REVANTH
MALAVIKA 23QT5A0301
23QT5A0306

KLRCET DEPARTMENT OF MECHANICAL ENGINEERING

 ACKNOWLEDGEMENT

It is customary for a student to thank all those who have helped him to successfully
complete a project, particularly a different one, but we are doing so not because of the
monotonous tradition but because they are genuinely entitled to our heart full thanks.
I am highly indebted to Smt. K.NAGAMANI, Chairperson,KLR College of
Engineering & Technology, Paloncha.
We are very much grateful to MR. SIDDHARTH REDDY, secretary of
KLR college of engineering & technology, paloncha.
We are greatly obliged to our Principal Dr. K RAJENDRA PRASAD, Head of the
Department Mr. M. MURTHY REDDY, for creating an excellent academic Eli mate which
made this endeavour possible.

We would like to extend our sincere thanks to our guide, Ms. V. DIVYA
Asst. Professor for his keen interest, valuable suggestions and constant
encouragement throughout the project.

We are also thankful to the staff of department labs, KLR, PALVONCHA, for
providing us with the required tests and thankful to the library staff for providing journals and
academic books.

We take great pleasure in expressing deep gratitude to all those who guided us during
the project work.

Last but not the least, we wish to acknowledge our parents and friends for giving
moral strength and constant encouragement.

K. A.
SAIMALAVIKA
GANESH 22QT1A0308
23QT5A0306

KLRCET DEPARTMENT OF MECHANICAL ENGINEERING

 DECLARATION

I here
I here by declare
by declare that
that the the project
project entitledentitled "SOLAR POWERED MULTIPURPOSE
SPRAYER
SPRAYERFOR
FORAGRICULTURE"
AGRICULTURE" is submitted
submitted to KLR COLLEGE OF ENGINEERING

& TECHNOLOGY in partial fulfillment of the requirement for the award of Degree of
bachelor of Technology in Mechanical Engineering by JNTUH, the project is done by us and
not has been submitted to any institute or university for the award of any degree or
equivalent.

Date :
Place : PALONCHA
PROJECT ASSOCIATES

A. MALAVIKA
A MALAVIKA 23QT5A0306

KLRCET DEPARTMENT OF MECHANICAL ENGINEERING

 DECLARATION

I here
I here by declare
by declare that
that the the project
project entitledentitled "SOLAR POWERED MULTIPURPOSE
SPRAYER
SPRAYERFOR
FORAGRICULTURE"
AGRICULTURE" is submitted
submitted to KLR COLLEGE OF ENGINEERING

& TECHNOLOGY in partial fulfillment of the requirement for the award of Degree of
bachelor of Technology in Mechanical Engineering by JNTUH, the project is done by us and
not has been submitted to any institute or university for the award of any degree or
equivalent.

Date :
Place : PALONCHA
PROJECT ASSOCIATES

K. TEJA MANIKANTA
A MALAVIKA 23QT5A0307
23QT5A0306

KLRCET DEPARTMENT OF MECHANICAL ENGINEERING

 DECLARATION

I here
I here by declare
by declare that
that the the project
project entitledentitled "SOLAR POWERED MULTIPURPOSE
SPRAYER
SPRAYERFOR
FORAGRICULTURE"
AGRICULTURE" is submitted
submitted to KLR COLLEGE OF ENGINEERING

& TECHNOLOGY in partial fulfillment of the requirement for the award of Degree of
bachelor of Technology in Mechanical Engineering by JNTUH, the project is done by us and
not has been submitted to any institute or university for the award of any degree or
equivalent.

Date :
Place : PALONCHA
PROJECT ASSOCIATES

K. REVANTH
A MALAVIKA 23QT5A0301
23QT5A0306

KLRCET DEPARTMENT OF MECHANICAL ENGINEERING

 DECLARATION

I here
I here by declare
by declare that
that the the project
project entitledentitled "SOLAR POWERED MULTIPURPOSE
SPRAYER
SPRAYERFOR
FORAGRICULTURE"
AGRICULTURE" is submitted
submitted to KLR COLLEGE OF ENGINEERING

& TECHNOLOGY in partial fulfillment of the requirement for the award of Degree of
bachelor of Technology in Mechanical Engineering by JNTUH, the project is done by us and
not has been submitted to any institute or university for the award of any degree or
equivalent.

Date :
Place : PALONCHA
PROJECT ASSOCIATES

K. SAI GANESH
A MALAVIKA 22QT1A0308
23QT5A0306

KLRCET DEPARTMENT OF MECHANICAL ENGINEERING