Industria Basica is an Argentine company which is part

of the Casiba Group and was founded in 1952.

As a leading supplier of cable tray support systems, we have

sold our products to the most important multinational
industrial companies in Argentina related to oil,
communications, datacenters, food & beverage industry,
public buildings and construction sites.

Contact us to obtain more information about our wide range Industria Basica Plant
of products and their applications. Pilar - Buenos Aires

Customers
United States of America
- Apex Machine Company - Graniti Fiandre - Powercon Corporation
- Autotec Inc. - Hayes Clinical Laboratory - Rockaway
- Avgol - Jackson County School District - Sonic Networks Inc.
- Ced-City of Industry - Kiefel - Stanley Services Inc.
- Coastal Communication Inc. - Marquis Electrical Maintenance - Toyota Motor Corporation
- Communication Supply Corporation Ltd. - Turtle and Hughes Inc.
- Cristal Energy SVCS Inc. - Metro Automation - Vantage
- Durr Automation Inc. - Microimage - Wagner Powder Systems
- Elliott Power Systems - Morris Recycling Inc. Inc.
- First Security & Sat Systems - Motors & Controls Corporation - Walt Disney
- FM Tech Inc. - National Security (Textile Services)
- Fontijne Grotnes - Pacific Telemanagement - Western Extralite Company
- Gichner Shelter System Services - Western Technologies Inc.

Argentina: Chile:
- Yacireta (Hydroelectric Power Station) - Telehouse Chile (Datacenter)
- Proyecto Mega (Steam Power at San Nicolás Plant)
- Mitsubishi (Gas Duct Station at Loma de la Lata Plant)
- Comision Nacional de Energia Atómica Panama:
- Globecomm Systems Inc (Datacenter) - Panama Hardware Eng
- Techint Group - Telecom International Panama
- Repsol
- Pluspetrol
- Procter & Gamble Perú:
- Dow Chemical - Centro Atómico de Perú (Nuclear Power Plant)
- Italtel
- Dycasa

International Sales:
Phone: +1 646 485-9649 | Fax: +1 408 351-9469
cabletray@Click-n-Go.cc

INDUSTRIA BASICA S. A.
Dr. A. Sabattini 5294 Caseros (B1678CQR) Buenos Aires, Argentina | Tel.: +54 11 4512-7555 | Fax:+54 11 4512-7556
info@Click-n-Go.cc | www.IndustriaBasica.com

2
General overview Flat fittings
The cable tray is manufactured from galvanized mill steel. Joining straight sections to fittings is performed in the
C lickAndGo's unique advantage is that its design allows for same fashion with the exception that splice plates
sectional fitting / assembly without using any nuts, bolts or
are not required.
tools *.
*= Versatile design does permit their use if so desired. All The fittings themselves are designed to act as splice plates.
dimensions expressed in S I (metric) are mandatory. Values The fittings come flat and are hand folded in the field,
expressed in feet or inches are approximate.
as illustrated (model 90 HB shown).

Competitive advantages
ClickAndGo Perforated Bottom Cable Trays' competitive
advantages over conduit include the following:

SAFETY: Unlike conduit, ClickAndGo Perforated Bottom

Cable Trays do not provide a significant path for
transmission of corrosive, explosive or toxic gases and
liquids, avoiding plant personnel and sensitive
equipment from being exposed to these elements.

EASY CABLE INSTALLATION, INSPECTION AND

REPAIR: The ClickAndGo Perforated Bottom Cable Tray
system is designed for quick and easy new cable
installation, inspection and repair.

REDUCED INSTALLATION COSTS=SAVINGS: As

previously stated, ClickAndGo Perforated Bottom Cable
Trays are normally erected without nuts, bolts or tools,
resulting in reduced installation costs = savings. The
fittings come flat and are hand folded in the field at time of
installation, eliminating the need for costly field
fabrication.
An additional benefit of this design is reduced freight and
warehousing / storage costs.

GREATER LOADING CAPACITY: ClickAndGo

Perforated Bottom Cable Trays also provide a greater
cable loading capacity with minimal additional cost
compared to conduit, the latter requiring higher strength
supports.

SIMPLER DESIGN: Conduit systems require many more

different components.
The ClickAndGo Perforated Bottom Cable Tray system is
SIMPLE and offers the same or greater capacity utilizing
far fewer components.

3
Installation guidelines Material Specifications
Installing ClickAndGo PERFORATED BOTTOM CABLE TRAYS is ClickAndGo PERFORATED BOTTOM CABLE TRAYS are
very QUICK and SIMPLE !! manufactured from 0.89 mm. thickness galvanized mill
Simply join straight sections with the uniquely designed splice carbon steel, in accordance with ASTM A 653 G 90 coating
plates, which embrace the sections from top to bottom (1). specifications.
Once the straight sections and splice plates are correctly
positioned, apply hand pressure to the metal and plastic
clips (2) and: “CLICK” YOU'RE DONE !! (3).

U.L. Classification
ClickAndGo PERFORATED BOTTOM CABLE TRAYS are
1 classified by Underwriters Laboratories Inc. as to their
suitability as an equipment grounding conductor only. The
individual sections are designed for the use of jumper wires
in order to meet the NEC 392.7 grounding requirements.
They have been classified as to their suitability for use as
equipment grounding conductors in accordance with
Sections 392.3 (C) and 392.7 (B) NEC 2002.
All straight section are grounded and labelled as U.L.
classified .

Load span
2 An individual cable tray's load strength is proportionate to the
length of its unsupported span, commonly referred to as
'support span'. The support span should not exceed the
length of an un-spliced straight section, to ensure that no
more than one splice is placed between supports. The
maximum recommended support span is 8 feet (240 mm) for
straight sections. Fittings should be installed in accordance
with NEMA Standards VE-2.

Applications
ClickAndGo PERFORATED BOTTOM CABLE TRAYS
3 are an ideal substitute for conduit, specially in indoor
installations / applications such as:

Telecommunications. Food Processing Plants.

Fiber Optics. Manufacturing Plants.
Raised Access Floors. Shopping Malls.
Instrumentation Data Centers.
and lightning wiring.
Schools & Hospitals.
Industrial Equipment.
Public Buildings.
Communications
Closets.

IMPORTANT WARNING
Cable trays are designed to be used as a support for cables, and not intended or designed to be used
as personnel walkways, ladders or supports.

4
 Components
Straight Section
ST
Width Codes Covers

2" (50 mm.) ST2 CST2

4" (100 mm.) ST4 CST4
10´ (3000 mm.) 6" (150 mm.) ST6 CST6
8" (200 mm.) ST8 CST8
12" (300 mm.) ST12 CST12
18” (450 mm.) ST18 CST18
24” (600 mm.) ST24 CST24

Splice Plate Splice Plate 2

SP 4/24 SP 2

For widths between 4” (100 mm.) and 24” (600 mm.) Used exclusively for 2” (50 mm.) straight
Used exclusively for the straight sections sections and vertical bends.
and the vertical bends. Required clips are provided Required clips are provided with each component.
with each component.

ClickAndGo! System ClickAndGo! System

Horizontal Bend 45º Horizontal Bend 90º

45HB 90HB

Width Codes Covers Width Codes Covers

2" (50 mm.) 45HB2 C45HB2 2" (50 mm.) 90HB2 C90HB2
Required clips 4" (100 mm.) 45HB4 C45HB4 Required clips 4" (100 mm.) 90HB4 C90HB4
are provided are provided
with each 6" (150 mm.) 45HB6 C45HB6 with each 6" (150 mm.) 90HB6 C90HB6
component. 8" (200 mm.) 45HB8 C45HB8 component. 8" (200 mm.) 90HB8 C90HB8
12" (300 mm.) 45HB12 C45HB12 12" (300 mm.) 90HB12 C90HB12
18” (450 mm.) 45HB18 C 45HB18 18” (450 mm.) 90HB18 C 90HB18
24” (600 mm.) 45HB24 C 45HB24 24” (600 mm.) 90HB24 C 90HB24

5
Vertical Bend
VB
Width Codes Covers

2" (50 mm.) VB2 CVB2

4" (100 mm.) VB4 CVB4
6" (150 mm.) VB6 CVB6
8" (200 mm.) VB8 CVB8
12" (300 mm.) VB12 CVB12
18” (450 mm.) VB18 CVB18
24” (600 mm.) VB24 CVB24

Required clips are provided with each component.

TEE 90º Cross 90º

T X

Width Codes Covers Width Codes Covers

2" (50 mm.) T2 CT2 2" (50 mm.) X2 CX2
Required clips 4" (100 mm.) T4 CT4 Required clips 4" (100 mm.) X4 CX4
are provided 6" (150 mm.) T6 CT6 are provided 6" (150 mm.) X6 CX6
with each 8" (200 mm.) T8 CT8 with each 8" (200 mm.) X8 CX8
component. component.
12" (300 mm.) T12 CT12 12" (300 mm.) X12 CX12
18” (450 mm.) T18 CT18 18” (450 mm.) X18 CX18
24” (600 mm.) T24 CT24 24” (600 mm.) X24 CX24

Deviations (left & right)

RD / LD
Right Deviation Left Deviation
Width
Codes Covers Codes Covers

2" (50 mm.) RD2 CRD2 LD2 CLD2

4" (100 mm.) RD4 CRD4 LD4 CLD4
6" (150 mm.) RD6 CRD6 LD6 CLD6
8" (200 mm.) RD8 CRD8 LD8 CLD8
12" (300 mm.) RD12 CRD12 LD12 CLD12
18” (450 mm.) RD18 CRD18 LD18 CLD18
24” (600 mm.) RD24 CRD24 LD24 CLD24

Required clips are provided with each component.

RIGHT LEFT

6
Reduction Fitting Central
RFC
Width Codes Covers

4" to 2" (100 mm to 50 mm) RFC 4/2 CRFC 4/2

6" to 4" (150 mm to 100 mm) RFC 6/4 CRFC 6/4
8" to 6" (200 mm to 150 mm) RFC 8/6 CRFC 8/6
12" to 8" (300 mm to 200 mm) RFC 12/8 CRFC 12/8
18" to 12" (450 mm to 300 mm) RFC 18/12 CRFC 18/12
24" to 18" (600 mm to 450 mm) RFC 24/18 CRFC 24/18

Required clips are provided with each component.

Complementary Accesory
CA
Width Codes Covers

2" (50 mm.) CA2 CCA2

4" (100 mm.) CA4 CCA4
6" (150 mm.) CA6 CCA6
8" (200 mm.) CA8 CCA8
12" (300 mm.) CA12 CCA12
18” (450 mm.) CA18 CCA18
24” (600 mm.) CA24 CCA24
Accesory used for the union of fittings.
Required clips are provided with each component.

Separators Covers
SEP CST

The separator material is galvanized Each cover is provided

mill carbon steel, 0,89 mm. of thickness. with two fasteners
Four fasteners are provided with each separator. for each ending.
No tooling required (hand fixed).

7
Floor Support
FS
Width Codes

2" & 4" (50 mm & 100 mm) FS 2/4

6" - 8" - 12" (150 mm - 200 mm - 300 mm) FS 6/12
18" - 24" (450 mm - 600 mm) FS 18/24

Support suitable to under floor installations.

Brackets
BR / BR6 / BR8 / BR12 / BR18 / BR24

Material:G alvanized, Width Codes Material: Carbon Steel, Width Codes

mill carbon steel 2 mm. thickness,
3 mm. thickness. 6" (150 mm.) BR6 hot-dip galvanized. 2" (50 mm.) BR2
8" (200 mm.) BR8 4" (100 mm.) BR4
12" (300 mm.) BR12
18” (450 mm.) BR18
24” (600 mm.) BR24

Trapeze
TRD TRS

Material:Carbon Steel, Material: G alvanized mill

Width Codes Width Codes
3 mm. thickness, carbon steel, 3 mm.
hot-dip galvanized. 4" (100 mm.) TRD4 thickness. 2" (50 mm.) TRS2
6" (150 mm.) TRD6 4" (100 mm.) TRS4
8" (200 mm.) TRD8 6" (150 mm.) TRS6
12" (300 mm.) TRD12 8" (200 mm.) TRS8
18” (450 mm.) TRD18
24” (600 mm.) TRD24

8
 1 Straight Section 6 Vertical Bend

2 Splice Plate 7 Tee

3 ClickAndGo System 8 Cross

4 Horizontal Bend 90° 9 Bracket

5 Horizontal Bend 45° 10 Trapeze

Width 12” (300 mm.)

Load test results for a 300 mm (12 ") - width cable tray with a support span distance of 244 cm (96")
according to NEMA VE1.

LOAD DEFLECTION DEFLECTION

Kg./m Lbs./m (inches) (mm.)

0 0 0 0
6,69 14,75 0,072 1,83
13,37 29,48 0,133 3,38
20,06 44,22 0,188 4,78
26,75 58,97 0,243 6,17
33,41 73,66 0,301 7,64
40,13 88,47 0,346 8,79
46,88 103,35 0,389 9,89
53,51 117,97 0,437 11,11
60,2 132,72 0,486 12,35

Brochure contents subject to change without prior notice.

For the most current information please refer to the website at www.Click-n-Go.cc

click-n-go-brochure-us.pdf
Rev. 3-08 9