GL7033

GL8033
GL9035
 A B

C D

E F
2
G H

I J

20 O

K L
3
 M N

O P

4
 (Original instructions) ENGLISH

Intended use Safety of others

Your Black & Decker trimmer has been designed for trimming u This appliance is not intended for use by persons (includ-
and finishing lawn edges and to cut grass in confined spaces. ing children) with reduced physical, sensory or mental
This appliance is intended for consumer use only. capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concern-
Safety instructions ing use of the appliance by a person responsible for their
Warning! When using mains-powered appliances, basic safety.
safety precautions, including the following, should always be u Children must be supervised to ensure that they do not
followed to reduce the risk of fire, electric shock, personal play with the appliance.
injury and material damage.
Warning! When using the machine the safety rules must be Residual risks.
followed. For your own safety and bystanders please read Additional residual risks may arise when using the tool which
these instructions before operating the machine. Please keep may not be included in the enclosed safety warnings. These
the instructions safe for later use. risks can arise from misuse, prolonged use etc.
u Read all of this manual carefully before operating the Even with the application of the relevant safety regulations
appliance. and the implementation of safety devices, certain residual
u The intended use is described in this manual. The use of risks can not be avoided. These include:
any accessory or attachment or the performance of any u Injuries caused by touching any rotating/moving parts.

operation with this appliance other than those recom- u Injuries caused when changing any parts, blades or ac-

mended in this instruction manual may present a risk of cessories.

personal injury. u Injuries caused by prolonged use of a tool. When using

u Retain this manual for future reference. any tool for prolonged periods ensure you take regular
breaks.
Using your appliance u Impairment of hearing.

Always take care when using the appliance. u Health hazards caused by breathing dust developed when

u Always use safety glasses or goggles. using your tool (example:- working with wood, especially
u Never allow children or people unfamiliar with the instruc- oak, beech and MDF.)
tions to use the appliance.
u Do not allow children or animals to come near the work After use
area or to touch the appliance or power supply cord. u When not in use, the appliance should be stored in a dry,
u Close supervision is necessary when the appliance is well ventilated place out of reach of children.
used near children. u Children should not have access to stored appliances.
u This appliance is not intended for use by young or infirm u When the appliance is stored or transported in a vehicle
persons without supervision. it should be placed in the boot or restrained to prevent
u This appliance is not to be used as a toy. movement following sudden changes in speed or direc-
u Only use the appliance in daylight or good artificial light. tion.
u Use in a dry location only. Do not allow the appliance to

become wet. Inspection and repairs

u Do not immerse the appliance in water. u Before use, check the appliance for damaged or defective
u Do not open the body casing. There are not user-servicea- parts. Check for breakage of parts and any other condi-
ble parts inside. tions that may affect its operation.
u Do not operate the appliance in explosive atmospheres, u Do not use the appliance if any part is damaged or defec-
such as in the presence of flammable liquids, gases or tive.
dust. u Have any damaged or defective parts repaired or replaced
u To reduce the risk of damage to plugs or cords, never pull by an authorised repair agent.
the cable to remove the plug from a socket. u Never attempt to remove or replace any parts other than
those specified in this manual.

5
 ENGLISH (Original instructions)

Using an extension cable u Always ensure that the ventilation slots are kept clear of
Always use an approved extension cable suitable for the debris.
power input of this appliance (see technical data). The u Do not use the lawn trimmer (edge trimmer), if the cords
extension cable must be suitable for outdoor use and marked are damaged or worn.
accordingly. Up to 30 m of 1.5 mm2 HO5VV-F extension cable u Keep extension cords away from cutting elements.
can be used without loss of product performance. Before use,
inspect the extension cable for signs of damage, wear and Labels on appliance
ageing. Replace the extension cable if damaged or defective. The following warning symbols are found on the appliance:
When using a cable reel, always unwind the cable completely.

Additional safety instructions for grass trimmers

Warning! Cutting elements continue to rotate after the motor
Read the manual prior to operation.
is switched off.
u Be familiar with the controls and the proper use of the

appliance. Wear safety glasses or goggles when operating

u Before use, check the power supply cord and extension this appliance.
cord for signs of damage, ageing and wear. If a cord be-

N
comes damaged during use, disconnect the cord from the
mains supply immediately. DO NOT TOUCH THE CORD Wear suitable ear protectors when operating this
BEFORE DISCONNECTING THE SUPPLY. appliance.

E
u Do not use the appliance if the cords are damaged or

worn. Always remove the plug from the socket before

u Wear stout shoes or boots to protect your feet. inspecting a damaged cable. Do not to use your
u Wear long trousers to protect your legs. strimmer if the cable is damaged.
u Before using the appliance, check that your cutting path is

K
free from sticks, stones, wire and any other obstacles. Beware of flying objects. Keep bystanders away
u Only use the appliance in the upright position, with the
from the cutting area.
cutting line near the ground. Never switch the appliance

R
on in any other position.
u Move slowly when using the appliance. Be aware that Do not expose the appliance to rain or high
freshly cut grass is damp and slippery. humidity.
u Do not work on steep slopes. Work across the face of

slopes, not up and down.

u Never cross gravel paths or roads while the appliance is

running. Directive 2000/14/EC guaranteed sound power.

u Never touch the cutting line while the appliance is running.

u Do not put the appliance down until the cutting line has
Electrical safety

#
come to a complete standstill.
u Use only the appropriate type of cutting line. Never use This appliance is double insulated; therefore
metal cutting line or fishing line. no earth wire is required. Always check that the
u Be careful not to touch the line trimming blade. power supply corresponds to the voltage on the
u Take care to keep the mains cable away from the cutting rating plate.
line. Always be aware of the position of the cable.
u Keep hands and feet away from the cutting line at all

times, especially when switching on the motor. u If the supply cord is damaged, it must be replaced by the
u Before using the appliance and after any impact, check for manufacturer or an authorised Black & Decker Service
signs of wear or damage and repair as necessary. Centre in order to avoid a hazard.
u Never operate the appliance with damaged guards or u Electric safety can be further improved by using a high-
without guards in place. sensitivity 30 mA Residual Current Device (RCD).
u Take care against injury from any device fitted for trimming

the filament line length. After extending new cutter line

always return the machine to its normal operating position
before switching on.
6
 (Original instructions) ENGLISH

Features Adjusting the height of the tool (fig. E & F)

This appliance includes some or all of the following features. This tool has a telescopic mechanism, allowing you to set it to
1. On/Off switch a comfortable height. There are multiple height settings.
2. Handle To adjust the height setting, proceed as follows:
3. Cable restraint u Release the height adjust locking clamp (16).

4. Power inlet u Gently pull the tube (7) up or down to the desired height.

5. Secondary handle u Close the height adjust locking clamp (16).

6. Adjustment button
7. Tube Releasing the cutting line
8. Spare spool storage In transit, the cutting line is taped to the spool housing.
9. HDL spool u Remove the tape holding the cutting line to the spool

10. Guard housing (12).

11. Line trimming blade
12. Spool housing Storing the spool not in use (fig. G)
13. Cutting line The tool has two cutting systems:.
14. Edge wheel u AFS: Single line autofeed for light trimming and edging.

u HDL: Heavy Duty Dual Line cutting system for more

Assembly overgrown areas.

Warning! Before assembly, make sure that the tool is Note: The HDL spool may be used in trimming mode only.
switched off and unplugged. The cutting system not in use can be stored in the spare spool
storage (GL8033 & GL9035 Only).
Fitting the guard (fig. A & B) u Align the tabs (17) on the spool cover with the cut outs

u Remove the screw (15) from the guard (10). (18) in the spare spool storage (8).
u Place the guard (10) onto the tool as shown. u Push the cover onto the spare spool storage until it snaps

u Firmly press the guard until it snaps into place. securely into place.
u Secure the guard with the screw.

u Tighten the screw. Connecting the tool to the mains (fig. H)

Warning! Never use the tool unless the guard is properly u Connect the female plug of a suitable extension cable to
fitted. the power inlet (19).
u Loop the cable through the cable restraint (20).

Attaching the secondary handle (fig. C) u Insert the mains plug into a mains outlet.

u Press in and hold the adjustment button (6) on the side of For wired in cable units: Make sure the cable is looped
the main body. through the cable restraint prior to connecting the plug to the
u Slide the secondary handle (5) in place over the adjust- mains outlet.
ment button (6).
Warning! Ensure that the teeth on the button are correctly Warning! The extension cable must be suitable for outdoor
aligned in slots in the handle and that the handle is secure. use.

Adjusting the position of the secondary handle Use

(fig. D) Warning! Let the tool work at its own pace. Do not overload.
The secondary handle (5) can be adjusted to provide optimum
balance and comfort. Setting the tool to trimming or edging mode (fig. I
u Press in the adjustment button (6) on the left side of the & J)
handle. The tool can be used in trimming mode as shown in fig. I or in
u Rotate the second handle (5) into the required position. edging mode to trim overhanging grass along lawn edges and
u Release the adjustment button (6). flower beds as shown in fig. J.
Warning! Ensure that the teeth on the button are correctly
aligned in slots in the handle and that the handle is secure. Trimming mode (fig. I)
For trimming, the trimmer head should be in the position
shown in fig. I. If it is not:
u Release the height adjust locking clamp (16).

u Rotate the tube (7) clockwise.

7
 ENGLISH (Original instructions)

u When the head is in position, close the height adjust lock- u Remove the empty spool (22) from the spool cover.
ing clamp (16). u Remove any dirt and grass from the spool cover and
Note: The tube will only rotate in one direction. housing.
Note: The HDL spool may be used in trimming mode. u Unclip the end of of the cutting line and guide the line into

the eyelet (23) (fig. M). The line should protrude approx.
Edging mode (fig. J) 11 cm from the spool cover.
For edging, the trimmer head should be in the position shown Note: Take care not to allow the the line on the spool to
in fig. J. If it is not: unravel. Hold it firmly with one hand at all times..
u Release the height adjust locking clamp (16). u Take the new spool and push it onto the boss in the spool

u Rotate the tube (7) anti-clockwise. cover. Rotate the spool slightly until it is seated.
u When the head is in position, close the height adjust lock- u Align the tabs (17) on the spool cover with the cut outs

ing clamp (16). (24) in the housing (12).

Note: The tube will only rotate in one direction. u Push the cover onto the housing until it snaps securely

into place.
Switching on and off Warning! If the cutting lines protrude beyond the trimming
u To switch the tool on, squeeze the on/off switch (1). blade (11), cut it off so that it just reaches the blade.
u To switch the tool off, release the trigger lever.
Warning! Never attempt to lock the trigger lever in the on Fitting a new piece of heavy duty cutting line (fig.
position. O & P)
Replacement packs of 10 heavy duty cutting lines are avail-
Hints for optimum use able from your Black & Decker dealer (cat. no. A6489). To fit a
new piece of cutting line, proceed as follows:.
General u Unplug the tool.

u In order to achieve optimum cutting results, only cut dry u Keep the tabs (17) depressed and remove the HDL cap

grass. (25) from the housing (12).

u Remove any dirt and grass from the HDL cap (25) and

Trimming housing.
u Hold the tool as shown in fig. K. u Remove the used piece of line from the HDL cap (25).

u Gently swing the trimmer from side to side. u Thread a new piece of line (26) through the eyelets (27) in

u When cutting long grass, work in stages from the top. Take either side of the HDL cap.
small cuts. u Put the central ferrule (28) in the indicated position (Fig.

u Keep the tool away from hard objects and delicate plants. R).
u Cutting line will wear faster and require more feeding if u Re-fit the HDL cap.

the cutting is done along pavements or other abrasive Warning! Only use the appropriate type of Black & Decker
surfaces or heavier weeds are being cut. cutting line.
u If the tool starts running slowly, reduce the load.
Mains plug replacement (U.K. & Ireland only)
Edging If a new mains plug needs to be fitted:
Optimum cutting results are achieved on edges deeper than u Safely dispose of the old plug.

50 mm. u Connect the brown lead to the live terminal in the new

u Do not use the tool to create edges. To create edges, use plug.
an edging spade. u Connect the blue lead to the neutral terminal.

u Guide the tool on its wheel as shown in fig. L. Warning! No connection is to be made to the earth terminal.
u To make a closer cut, slightly tilt the tool. Follow the fitting instructions supplied with good quality plugs.
Recommended fuse: 5 A.
Fitting a new spool of cutting line (fig. M & N)
Replacement spools of cutting line are available from your
Black & Decker dealer (cat. no. A6482). Packs containing 3
spools of cutting line are also available (cat. no. A6486).
u Unplug the tool.

u Keep the tabs (17) depressed and remove the spool cover

(21) from the housing (12) (fig. M).

8
 (Original instructions) ENGLISH

Troubleshooting Black & Decker provides a facility for the collection and
If your tool seems not to operate properly, follow the instruc- recycling of Black & Decker products once they have reached
tions below. If this does not solve the problem, please contact the end of their working life. To take advantage of this service
your local Black & Decker repair agent. please return your product to any authorised repair agent who
Warning! Before proceeding, unplug the tool. will collect them on our behalf.

Tool runs slowly You can check the location of your nearest authorised repair
u Check that the spool housing can rotate freely. Carefully agent by contacting your local Black & Decker office at
clean it if necessary. the address indicated in this manual. Alternatively, a list of
u Check that the cutting line does not protrude more than authorised Black & Decker repair agents and full details of our
11 cm from the spool housing. If it does, cut it off so that it after-sales service and contacts are available on the Internet
just reaches the line trimming blade. at: www.2helpU.com

Automatic line feed does not work Technical data

u Keep the tabs depressed and remove the spool cover
GL7033 GL8033 GL9035
from the housing.
(Type 1) (Type 1) (Type 1)
u Pull the cutting line until it protrudes 11 cm from the hous-

ing. If insufficient cutting line is left on the spool, install a Voltage VAC 230 230 230
new spool of cutting line as instructed above.
u Align the tabs on the spool cover with the cut outs in the Power input W 700 800 900
housing.
No-load speed min-1
u Push the cover onto the housing until it snaps securely 7000 7000 7000
into place. Weight kg 3.2 3.2 3.2
u If the cutting line protrudes beyond the trimming blade, cut

it off so that it just reaches the blade.

If the automatic line feed still does not work or the spool is Level of sound pressure:
jammed, try the following suggestions:
Sound pressure (LpA) 80 dB(A), uncertainty (K) 2 dB(A)
u Carefully clean the spool cover and housing.

u Remove the spool and check if the lever can move freely. Sound power (LWA) 94 dB(A), uncertainty (K) 2 dB(A)
u Remove the spool and unwind the cutting line, then wind it

on neatly again as described above. Replace the spool as Vibration total values (triax vector sum) according to EN 786:

instructed. Vibration emission value (ah) 8.2 m/s2, uncertainty (K) 1.5 m/s2

Protecting the environment

Z
Separate collection. This product must not be
disposed of with normal household waste.

Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
able for separate collection.

z
Separate collection of used products and packag-
ing allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.

Local regulations may provide for separate collection of elec-

trical products from the household, at municipal waste sites or
by the retailer when you purchase a new product.

9
 ENGLISH (Original instructions)

EC declaration of conformity Guarantee

MACHINERY DIRECTIVE Black & Decker is confident of the quality of its products and
OUTDOOR NOISE DIRECTIVE offers an outstanding guarantee. This guarantee statement is

%
in addition to and in no way prejudices your statutory rights.
The guarantee is valid within the territories of the Member
States of the European Union and the European Free Trade
Area.

GL7033/GL8033/GL9035 If a Black & Decker product becomes defective due to faulty

materials, workmanship or lack of conformity, within 24
Black & Decker declares that these products described under months from the date of purchase, Black & Decker guarantees
"technical data" are in compliance with: to replace defective parts, repair products subjected to fair
2006/42/EC, EN 60335-1, EN 60335-2-91 wear and tear or replace such products to ensure minimum
2000/14/EC, Lawn Trimmer, L ≤ 50 cm, Annex VIII
inconvenience to the customer unless:
KEMA Quality B.V., Utrechtseweg 310, 6802 ED Arnhem,
u The product has been used for trade, professional or hire
The Netherlands
purposes;
Notified Body ID No.: 0344
u The product has been subjected to misuse or neglect;

u The product has sustained damage through foreign

Level of sound power according to 2000/14/EC
(Article 12, Annex III, L ≤ 50 cm): objects, substances or accidents;
u Repairs have been attempted by persons other than
LWA (measured sound power) 94 dB(A)
uncertainty (K) = 2 dB(A) authorised repair agents or Black & Decker service staff.
LWA (guaranteed sound power) 96 dB(A)
uncertainty (K) = 2 dB(A) To claim on the guarantee, you will need to submit proof of
purchase to the seller or an authorised repair agent. You can
These products also comply with directive 2004/108/EC and check the location of your nearest authorised repair agent
2011/65/EU. by contacting your local Black & Decker office at the address
indicated in this manual. Alternatively, a list of authorised
For more information, please contact Black & Decker at the Black & Decker repair agents and full details of our after-
following address or refer to the back of the manual. sales service and contacts are available on the Internet at:

_
The undersigned is responsible for compilation of the technical www.2helpU.com
file and makes this declaration on behalf of Black & Decker.
Please visit our website www.blackanddecker.co.uk to register
your new Black & Decker product and to be kept up to date
Kevin Hewitt on new products and special offers. Further information on the
Vice-President Global Engineering Black & Decker brand and our range of products is available
Black & Decker Europe, 210 Bath Road, Slough, at www.blackanddecker.co.uk
Berkshire, SL1 3YD
United Kingdom
10/10/2012

10
 TYPE
GL7033 - GL8033 - GL9035 1

4 2

2 12

9
7

10 11

25

14

GL9035
15

18

19

16
20

E16766 www.2helpU.com 02 - 10 - 12
Australia
Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100
20 Fletcher Road, Mooroolbark, Fax 03-9727 5940
Victoria, 3138

New Zealand
Black & Decker Tel. +64 9 259 1133
5 Te Apunga Place Fax +64 9 259 1122
Mt Wellington
Auckland 1060

United Kingdom
Black & Decker Tel. 01753 511234
210 Bath Road Fax 01753 551155
Slough, Berkshire SL1 3YD

ENGLISH

Do not forget to register your product!

www.blackanddecker.co.uk/productregistration
Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product
code to Black & Decker in your country.

90592290 REV-0 10/2012