Altech Tower Lights Brochure
Altech Tower Lights Brochure
With experienced Product Engineers and Customer Service personnel, Altech provides solutions to
your most pressing application challenges. All with one thought in mind - to ensure that we solve
your problem the first time!
Altech’s Commitment
Altech’s Automation and Control components meet
applicable national and international standards, such as
UL, NEC, CSA, IEC and VDE. Altech provides these
products with superior customer service and delivery
through a ISO 9001 Quality Management system, which
stresses continuous process improvement. We perform
these services with honesty and integrity. All Altech
employees are trained in this Quality Management System
and are dedicated to achieve these goals. Altech’s quality
system has been ISO approved since 1999.
Table of Contents
Introduction..................................................................................................4
Technical Information ..................................................................................5
Lens with Integrated LED ............................................................................6
Lens with Built-In Buzzer .............................................................................7
Sound Module ..............................................................................................7
Accessories .................................................................................................8
Bases .......................................................................................................8-9
Tower Light Selection.................................................................................10
Standard Available Combinations ..............................................................10
Installation Instructions ...............................................................................11
Multi-Color LED Light .................................................................................12
Multi-Color LED Light for PLC Applications................................................13
LED Inspection Light ..................................................................................14
Index...........................................................................................................15
DIMENSIONS
UPPER CAP 52 mm
(2.1 in)
(0.67 in)
17 mm
LENS
(2.68 in)
68 mm
(10.00 in)
254 mm
197 mm
(7.76 in)
BASE 54 mm
142 mm
(5.59 in)
(2.13 in)
(1.26 in)
32 mm
(3.43 in)
87 mm
COUNTER BORE
.1 m
Ø11.0/Ø5.2, (4X)
(2 4 m
)
in
SCREW SIZE - M5
3
5
XX
70 mm
(2.75 in)
70 mm
(2.75 in)
24V AC/DC Continuous LED TL50LA1U TL50LB1U TL50LG1U TL50LR1U TL50LY1U TL50LW1U
Flashing LED TL50LA2U TL50LB2U TL50LG2U TL50LR2U TL50LY2U TL50LW2U
Rotating LED TL50LA3U TL50LB3U TL50LG3U TL50LR3U TL50LY3U TL50LW3U
24V AC/DC Continuous Buzzer TL50LAZ1U TL50LBZ1U TL50LGZ1U TL50LRZ1U TL50LYZ1U TL50LWZ1U
Intermittent Buzzer TL50LAZ2U TL50LBZ2U TL50LGZ2U TL50LRZ2U TL50LYZ2U TL50LWZ2U
LENS CAP
LED - 110VAC
52 mm
(2.1 in)
(2.68 in)
68 mm
(0.67 in)
17 mm
(2.36 in)
35 mm
60 mm
(1.38 in)
110 mm
(4.33 in)
(2.36 in)
60 mm
69.9 mm 69.9 mm
(2.75 in) (2.75 in)
A
A
(3.54 in)
90 mm
(2.36 in)
60 mm
(0.79 in)
20 mm
130 mm
(3.54 in)
90 mm
70 mm 70 mm
6 mm (2.76 in) (2.76 in)
60 mm 40 mm (0.24 in)
(2.36 in) (1.57 in)
75 mm 50 mm
Note: Mentioned products are available as ex-stock, for any special requirement please refer to ordering information or contact Altech Corp.®.
52 mm
(2-1/16")
A. Drill mounting pattern which is
(45/64") included with product packaging.
17 mm
Electrical Wiring
STEP 1
BASE COVER
M5 X25 FULLY
THREADED SCREW
MOUNTING PAD
M5 WASHER STEP 2 B. Insert the wires from the bottom
of the base through the center hole
M5 NUT 3
1
in the base.
C. The terminals are numbered and
2
70 mm
(2-3/4") correspond to the module position.
0 common or negative (AC / DC)
1 module position 1
COUNTER BORE Ø1 1.0/Ø5.2, 4Nos. 2 module position 2
(SCREW SIZE - M5) 3 module position 3
4 module position 4
D. Insert the wires into the required
Ø54 mm (2.13 in) terminations for the tower light and
tighten to 0.5Nm (5lb* in).
Wiring Diagram
4
3
2
BOTTOM VIEW
1
38.0mm(1-1/2") 0
Ø5.3mm (1/4")
Ø38.0mm(1-1/2")
Ø17.5mm
(11/16")
For proper installation and operation of the Tower Light please follow the
instructions on both sides of product sheet included with each tower light.
+ + + +
Pole Connection
Accessories
IKAM04 IFAB01
Ø25
10 mm
50 mm
M5
IKAM02
CONTINUOUS
500 mm
PURPLE
PURPLE
BUZZER
WHITE
WHITE
RED
RED
BLUE
BLUE
YELLOW
YELLOW
GREEN
GREEN
BLACK
20 mm
GRAY
WITH FLASHING
25 mm
BROWN
WHITE
Ø18
BROWN
RED
BLUE
INPUT
YELLOW
POWER
GREEN IKAM04
+ + + +
65 mm
Technical Information
• Heat resistant, clear vision polycarbonate signal modules
122 mm
• Easy to install
• Easy wiring, 1 meter long standard cable
• Operating Temperature: -5 / +40 °C
20 mm
Ordering Information
Part No. Illumination Features Nominal Voltage Std. Pk.
IF5M024ZM05-1 Multi-color LED with Buzzer 24V AC/DC 1
IF5M110ZM05-1 Multi-color LED with Buzzer 110V AC 1
IF5M220ZM05-1 Multi-color LED with Buzzer 230V AC 1
IF5M024XM05-1 Multi-color LED – 24V AC/DC 1
IF5M110XM05-1 Multi-color LED – 110V AC 1
IF5M220XM05-1 Multi-color LED – 230V AC 1
* IF5_024X05-1 Single Color LED 24V AC/DC 1
* IF5_024Z05-1 Single Color LED with Buzzer 24V AC/DC 1
IF5P024XM05-1 Multi-color LED for PLC Applications 24V DC 1
IF5P024ZM05-1 Multi-color LED for PLC Applications with Buzzer 24V DC 1
IFAB01 – Pipe Adapter – 1
IKAM02 – 20mm Aluminum pole with Base (used with IFAB01) – 1
IKAM04 – 500mm Aluminum pole with Base (used with IFAB01) – 1
Technical Specifications
Rated Voltage 240V AC, 110V AC, 24V AC/DC, 12V DC
Limit of Operating Voltage -20% to + 10% of rated voltage
LED 5 mm through hole LED
Colors White light / black handle
Life 0.1 million hours
LED Arrangement Cluster
Color Temperature 6000°K - 7000°K
Number of LEDs 24
Operating Temperature -25°C to 65°C
Storage Temperature -30°C to 70°C
Surge Test 2 KV
HV Test for 60 seconds 2.5 KV
EMI/EMC Protection 2 KV
IP Protection IP 54
Power Consumption (240V) < 3W
Cable Type 3x 0.75 sq. mm
Cable Length 3 meter (10 ft.)*
Mounting Molded plastic hook * Other lengths available. Contact Altech.
Ordering Information
Part No. Color Voltage Plug** Std. Pk.
IL24D31W240A Cool White LED 240 VAC Not provided 1
IL24D31W110A Cool White LED 110 VAC Standard US plug 1
IL24D31W024C Cool White LED 24 V AC/ DC Not provided 1
IL24D31W012D Cool White LED 12 V DC Not provided 1