LS 763/2.8, L8.
5 Features
• Protective throughbeam photoelectric sensor with high performance reserve in infrared
light
• Activation input for testing and interlinking
• Compact construction with shock-resistant metal housing (V2A stainless steel) and
glass optics
• LED indicator in transmitter and receiver for function monitoring
• pnp transistor output for PLC applications
• Connection via M8 connector
Electrical Connection
Transmitter Receiver
Dimensional Drawing
Protective throughbeam
photoelectric sensor
Safety note:
• The protective throughbeam photoelectric sensor
is a contactless active protective device only in
connection with a safety-relevant control system,
in which the cyclical testing of transmitter and
receiver is carried out according to EN 61496-1,
category 2 (testing).
• The power supply unit used to operate the
photoelectric sensor must be able to compensate
for changes and interruptions of the supply
voltage acc. to EN 61496-1.
Minimum blackening object: ∅8mm.
• Design type: Stainless steel housing, therefore
also suitable, for example, for use in the
pharmaceutical industry.
Accessories
602026 – 2009/01 Subject to change without prior notice
(available separately)
• Mounting system (B 763)
• Connection cable 5m
- axial BK7 KB-003-5000-3A
- angled BK7 KB-003-5000-3 A Indicator diode
• Test-monitoring units: B Transmitter/receiver
- TNT 35 ( Part No. 500 33058) C Optical axis
- TMC 66 (Art.-Nr. 50082121)
Order guide
IEC 60947...
IEC 60947... Designation Part No.
Transmitter LS 763/2.8 Se, L8.5 501 05198
Leuze electronic GmbH + Co. KG
Liebigstrasse 4 Receiver LS 763/4 E, L8.5 501 05199
82256 Fuerstenfeldbruck / Germany
Phone +49 8141 5350-0
Telefax +49 8141 5350-190
info@leuze.de
www.leuze.com
LS 763/2.8, L8.5
Technical Data
Optical data
1)
Typ. operating range limit 0 ... 8m
2)
Operating range 0 ... 6m
Light source LED (modulated light)
Wavelength 880nm
Optics diameter 10mm
Shadowing item 8mm
Eff. angle of radiation max. ±4° acc. to EN 61496-2
Timing
Switching frequency 100Hz
Response time min. 5ms
Electrical data
24VDC ± 15%
3)
Operating voltage UB
Residual ripple ≤ 10% of UB (peak/peak)
Bias current receiver ≤ 15mA
transmitter ≤ 20mA
Switching output pnp transistor output
Function characteristics pnp light-on
Signal voltage high/low ≥ (UB-2V)/≤ 2V
Output current max. 100mA
Indicators
Receiver
LED red light path interrupted
LED green light path free
Transmitter
LED yellow transmitter ON
Mechanical data
Housing Stainless steel, V2A (1.4305), polycarbonate rear panel
Optics mineral glass
Weight 130g
Connection type M8 connector
Environmental data
Ambient temp. (operation/storage) -20°C ... +60°C/-30°C ... + 70°C
4)
Protective circuit 2,3
Protection class IP 65
Standards applied IEC 90647-5-2
Options
Activation input active
Transmitter active/not active ≥ 20V/ ≤ 2V or not connected
Activation/disable delay ≤ 0.5ms
Input resistance 10kΩ ± 10%
1) Typ. operating range limit: max. attainable range without performance reserve
2) Operating range: recommended range with performance reserve
3) Functional extra-low voltage with reliable disconnection or protective extra-low voltage (VDE 0100/T 410)
4) 2=polarity reversal protection, 3=short circuit protection
LS 763/2.8, L8.5
