Installation Instructions
SKID PAD
Accessory Name Parts Number Application Model Issue Date Publication No. FRT
SKID PAD 08P70-MLB-D00 CB750A 2022.10 MII 0.4 H
Introduction
ALL INFORMATION, ILLUSTRATIONS, DIRECTIONS AND SPECIFICATIONS INCLUDED IN THIS PUBLICATION ARE BASED
ON THE LATEST PRODUCT INFORMATION AVAILABLE AT THE TIME OF APPROVAL FOR PRINTING. Honda Motor Co., Ltd.
RESERVES THE RIGHT TO MAKE CHANGES AT ANY TIME WITHOUT NOTICE AND WITHOUT INCURRING ANY
OBLIGATION WHATSOEVER. NO PART OF THIS PUBLICATION MAY BE REPRODUCED WITHOUT WRITTEN PERMISSION.
THIS MANUAL IS WRITTEN FOR PERSONS WHO HAVE ACQUIRED BASIC KNOWLEDGE OF MAINTENANCE ON Honda
MOTORCYCLES, MOTOR SCOOTERS OR ATVS.
Honda Dealer:
Please give a copy of these instructions to your customer.
Customer:
Because it requires specialized knowledge and special tools and equipment, it is recommended to install it at a dealer with qualified
automobile maintenance.
How To Read These Symbols
Your safety, and the safety of others, is very important. To help you make informed decisions we have provided safety messages
and other information throughout this manual.
WARNING You CAN be KILLED or SERIOUSLY HURT if you don't follow instructions.
CAUTION You CAN be HURT if you don't follow instructions.
NOTICE The purpose of this message is to help prevent damage to your vehicle, other property, or the environment.
NOTE Things you want to know, things that are useful to know.
Follow the instructions of the Service Manual.
Follow the other symbol instructions of the "Installation Instructions BASIC".
Instruction Other Symbols
The symbols used throughout this instructions show specific service procedures.
Refer to "Installation Instructions BASIC" for description of each symbol.
INFORMATION
• To prevent burns, allow the engine, exhaust system, radiator, etc., to cool before installing the accessory.
• Take care not to damage the painted surfaces of the motorcycle.
• Save all removed parts unless otherwise indicated.
© Honda Motor Co., Ltd. 2022 1 of 3 72MLB060
Installation Instructions
PARTS LIST
When the instruction manual and installation instructions are included in this kit, be sure to give them to the customer.
Component No. Parts Name Qty Parts No.
(1) Right skid pad plate 1 –
(7) (2) Left skid pad plate 1 –
(3) Skid pad collar 2 –
(5) (6) (4) 8 x 60 mm socket bolt 2 –
(5) Skid pad body 2 –
(3) (6) 8.4 x 13.5 x 38 mm collar 2 –
(11) (7) Cushion 2 –
(4) (2)
(8) 10 x 30 mm flange bolt 2 95701-10030-07
(9) Skid pad base 2 –
(10) Pivot pin 2 –
(11) 10 mm self-lock nut 2 90304-VM0-770
(9)
(12) (1) (12) 10 x 75 mm flange bolt 4 90166-GHB-780
(8)
(10)
TORQUE INFORMATION
Refer to the Service Manual for the torque values including standard torque of the removed parts. ( )
INSTALLATION
Refer to the Service Manual for motorcycle, remove the motorcycle parts as shown. ( )
1. • Repeat on the right side.
• Do not work on the left and right sides at the same time to avoid engine tilting.
INSTALLATION IMAGE
© Honda Motor Co., Ltd. 2022 2 of 3 72MLB060
Installation Instructions
Install as shown.
2. • Repeat on the right side.
• Do not work on the left and right sides at the same time to avoid engine tilting.
NUT
Reuse. (2) (11)
(2) (9)
(12) (8)
Install as shown.
3.
• Repeat on the right side.
(9)
(7)
(6)
(5)
(3)
(4)
(10)
(4) (6) (7) (9) <RIGHT SIDE>
GUIDE
(3) (5) (10)
CLUTCH CABLE
© Honda Motor Co., Ltd. 2022 3 of 3 72MLB060
