Technical Submittal

CONCURE 90

Al Gurg Fosroc CO.LLC

P O Box 657, Dubai U.A.E.
Tel : 04 2039699, Fax : 04 2859649
www.fosroc.com
 CONTENTS

section 1 Submission Summary

Company Introduction

section 2 ISO Certification

Trade License

section 3 Technical Data Sheet

section 4 Material Safety Data Sheet

Section 5 Independent Test Certification

section 6 Job references

Company Profile
 SUBMISSION SUMMARY

Summary

Fosroc’s range of products offer the following key advantages :

▪ Technology developed to match application criteria

▪ High durability - long service life

▪ Full compatibility between systems

▪ Excellent track record in middle east conditions

In terms of this submission, points of note include the following :

▪ Technical datasheet

▪ Independent test certificates

▪ Job references and approvals of previous applications

The other main benefits of choosing Fosroc include :

▪ Products manufactured by an ISO 9001, quality-assured manufacturer

▪ Full range of complimentary products to ensure a compatible system

▪ Products manufactured, and fully supported, locally in the UAE

▪ Experienced, local applicators available

▪ Additional training available for main contractor’s supervisory staff to ensure

that the correct installation techniques are observed throughout
 constructive solutions

Al Gurg Fosroc
The company was founded as a joint venture in 1975 between HE Easa Saleh Al Gurg
and Fosroc International. Al Gurg Fosroc is the first construction chemicals company to
establish a manufacturing base in the region, and presently serves the markets of the
U. A. E., Kuwait, Bahrain, Oman and other Fosroc companies worldwide.
Fosroc is one of the world's leading manufacturers of advanced technology products for
the construction and refurbishment industries.
For over 45 years, Al Gurg Fosroc is widely recognised as the market leader in concrete
repairs and protection, in particular; and has built a substantial reputation in a wide
range of product fields: Admixtures - Concrete repair and protection - Joint fillers
and sealants -Waterproofing - Protective coatings - Surface treatments -
Waterstops - Grouts and anchors – Flooring – Electrochemical products and
services.
Fosroc's success is built on a powerful combination of market knowledge, technical
resource, manufacturing expertise and problem-solving capabilities. The company
follows a policy of detailed product research and development providing high quality
products and long-term solutions.
The company has been the first construction materials manufacturing company to
introduce specification and AutoCAD services.
Al Gurg Fosroc's products are guaranteed for quality, but they must be applied correctly
and consistently to benefit from a long service life. To ensure this success, Al Gurg
Fosroc has introduced a Contracts and Application Department. This ensures that the
technical product knowledge is transpired to the applicators and the availability of the
local technical support center ensures that the correct application techniques are
followed.
Al Gurg Fosroc's commitment to total quality management system had lead to ISO 9002
certification in December 1994 - the first construction chemicals company in the Gulf
region to achieve this prestigious award. To keep up with the present market demands,
Al Gurg Fosroc has chosen the policy of continuous improvement, which led to
ISO 9001:2015 certification.
Al Gurg Fosroc was awarded the ISO 14001 certification in 1996 making it the first
construction chemicals company and the third company in any sector in the Gulf region
to receive this award.
As a clear indication of continual improvement in safety, quality and environmental
standards, Al Gurg Fosroc was awarded the OHSAS 18001 certification in October
2004. Currently updated to ISO 45001:2018.
Al Gurg Fosroc has a state of the art production unit, which has an output exceeding
160,000 metric tons per annum.
www.fosroc.com

Al Gurg Fosroc LLC

Post Box 657, Dubai
United Arab Emirates telephone: fax: email:
(+9714) 2039699 (+9714) 2859649 agf@fosroc.com
www.fosroc. com
Registered Office: 215 Community, Street No. 13, Nad Al Hamar Road, Al Ramool Industrial Estate, Rashidiya, Dubai
ISO Certificate
Trade License
 ‫رخصة صناعية‬
‫‪Industrial License‬‬
‫تفاصيل الرخصة ‪License Details /‬‬
‫‪License No.‬‬ ‫‪300142‬‬ ‫رقم الرخصة‬

‫شركة القرق فوسروك (ذ‪ .‬م‪ .‬م)‬ ‫اسم الشركة‬

‫‪Company Name‬‬ ‫(‪AL GURG FOSROC CO. )L.L.C‬‬
‫شركة القرق فوسروك (ذ‪ .‬م‪ .‬م)‬ ‫السم التجارى‬
‫‪Trade Name‬‬ ‫(‪AL GURG FOSROC CO. )L.L.C‬‬

‫‪Legal Type‬‬ ‫(‪Limited Liability Company)LLC‬‬ ‫ذات مسئولية محدودة‬ ‫الشكل القانونى‬
‫‪Expiry Date‬‬ ‫‪09/03/2024‬‬ ‫تاريخ النتهاء‬ ‫‪Issue Date‬‬ ‫‪30/10/1974‬‬ ‫تاريخ الصدار‬

‫® ‪D&B D-U-N-S‬‬ ‫‪561643177‬‬ ‫الرقم العالمي‬ ‫‪Main License No.‬‬ ‫‪300142‬‬ ‫رقم الرخصة الم‬
‫‪No.‬‬
‫‪Register No.‬‬ ‫‪41541‬‬ ‫رقم السجل التجارى‬ ‫‪DCCI No.‬‬ ‫‪10278‬‬ ‫عضوية الغرفة‬

‫الطراف ‪License Members /‬‬

‫الحصص ‪Share /‬‬ ‫الصفة ‪Role /‬‬ ‫الجنسية ‪Nationality /‬‬ ‫السم ‪Name /‬‬ ‫رقم الشخص‪No./‬‬

‫مدير ‪Manager /‬‬ ‫الردن ‪Jordan /‬‬ ‫منار صلح سعيد جمهور‬ ‫‪496716‬‬
‫‪MANAR SALAH SAID JAMHOUR‬‬

‫نشاط الرخصة التجارية ‪License Activities /‬‬

‫‪Adhesives Manufacturing‬‬ ‫صناعة مواد اللصق‬
‫‪Construction Chemicals Manufacturing‬‬ ‫صناعة المواد الكيماوية لغراض البناء‬
‫‪Insulation Materials Manufacturing‬‬ ‫صناعة المواد العازلة‬
‫‪Fire Resistant & Retardant Materials Manufacturing‬‬ ‫صناعة المواد المقاومة والمانعة لنتشار الحريق‬
‫العنوان ‪Address /‬‬
‫‪Phone No‬‬ ‫‪971-4-6858606‬‬ ‫تليفون‬ ‫‪P.O. Box‬‬ ‫‪657‬‬ ‫صندوق بريد‬
‫‪Fax No‬‬ ‫‪971-4-2859649‬‬ ‫فاكس‬ ‫‪Parcel ID‬‬ ‫‪215-357‬‬ ‫رقم القطعة‬
‫‪Mobile No‬‬ ‫‪971-50-6407901‬‬ ‫هاتف متحرك‬ ‫البريد اللكتروني ‪Email /‬‬

‫ملك الشيخ مانع بن خليفه بن سعيد ال مكتوم ‪ -‬ام رمول ‪ P215-357UNIT7‬مستودع رقم‬

‫الملحظات ‪Remarks /‬‬

‫تغيير المدير ‪.10/3/2019‬‬
‫تم نقل الموقع بتاريخ ‪15/04/2019‬‬
‫(استيراد وتصدير) حسب انشطة الرخصه‬

‫‪Print Date‬‬ ‫‪10/03/2023‬‬ ‫‪12:45‬‬ ‫تاريخ الطباعة‬ ‫‪Receipt No.‬‬ ‫‪14890100‬‬ ‫رقم اليصال‬
‫يمكنك الن تجديد رخصتك التجارية من خلل الرسائل النصية القصيرة‪ ،‬أرسل رقم الرخصة إلى ‪( 6969‬دو‪/‬اتصالت) للحصول‬
‫على اذن الدفع‪.‬‬ ‫‪Get FREE access to‬‬
‫‪Zoho One for the first‬‬
‫‪Now you can renew your trade license by sending a text message )SMS(. Send your trade‬‬ ‫‪year‬‬
‫‪license number to 6969 )Du/ Etisalat( to receive payment voucher.‬‬ ‫احصل على زوهو ون مجانا (‬
‫للسنة الولى‬
‫‪Zoho.com/det‬‬

‫وثيقة إلكترونية معتمدة وصادرة بدون توقيع من دائرة القتصاد والسياحة في دبي ‪.‬لمراجعة صحة البيانات الواردة في الرخصة يرجي مسح رمزالستجابة السريعة‬
‫‪this is a certified e-document issued without signature by the department of Economy and Tourism .Kindly Scan the QR Code to‬‬
‫‪Verify the certificate‬‬
License no. 300142 300142 ‫رقم الرخصة‬

Membership no. 10278 10278 ‫رقم العضوية‬

Registration no. 41541 41541 ‫رقم السجل التجاري‬

Trade Name AL GURG FOSROC CO. (L.L.C) (‫ م‬.‫ م‬.‫شركة القرق فوسروك )ذ‬ ‫السم التجاري‬

Legal Status Limited Liability Company(LLC) ‫ذات مسئولية محدودة‬ ‫الشكل القانوني‬

Activity Insulation Materials Manufacturing ‫صناعة المواد العازلة‬ ‫نوع النشاط‬

Adhesives Manufacturing ‫صناعة مواد اللصق‬
Construction Chemicals ‫صناعة المواد الكيماوية لغراض البناء‬
Manufacturing ‫صناعة المواد المقاومة والمانعة لنتشار‬
Fire Resistant & Retardant ‫الحريق‬
Materials Manufacturing

Member Since 30/10/1974 30/10/1974 ‫تاريخ النتساب‬

Date of Issue 30/10/1974 30/10/1974 ‫تاريخ الصدار‬

Expiry Date 09/03/2024 09/03/2024 ‫تاريخ النتهاء‬

Technical data sheet
 Concure 90* constructive solutions

High quality, resin based, concrete curing compound

Uses Description

Provides a high efficien , spray-applied curing compound, to Concure 90 concrete curing compound is resin based and is
retain water within concrete for effective curing. It is suitable supplied in various pigmented grades.
for all common forms of concreting, and is of particular benefit
Clear - straw liquid, drying to a clear fil
for large concrete areas, including :
Green - As clear grade but with green fugitive
 Car park decks and ramps.
White - Silver liquid drying to a silver fil
 Airport runways and hardstanding areas.
When first applied to a fresh cementitious surface the product
 Concrete tanks and reservoirs.
forms a continous, non-penetrating coating. This coating dries
 Warehouses and unloading bays. to form a continuous film which provides a barrier to moisture
loss ensuring more efficien cement hydration, improved du-
 Bridges
rability and reduced shrinkage.
 Piers, jetties and harbours.
The white and aluminised grades contain pigments based on
tiatnium di-oxide and aluminimum flake respectively to meet
Advantages
specific tions requiring such pigmentation for reduction of solar
 Improved curing of concrete enhances cement hydration temperature gain.
and provides a more durable concrete.
Properties
 Control of moisture loss improves surface quality, reducing
permeability, producing a hard wearing, dust free surface
Form : Liquid - white or clear
and minimising potential for surface cracking and shrink-
Curing efficiency : 90% (BS 7542)
age.

 Cost effec ive - Light reflective grades minimise solar Instructions for use
temperature gain.
Pre-application
 Economic - Spray application reduces labour costs and
Concure 90 pigmented grades should be gently stirred imme-
eliminates the need for alternative curing systems.
diately before use, to ensure even dispersal of the pigment.

Standards compliance Application should not begin until the concrete is free from
surface water, and should not commence at all if bleed water
All grades of Concure 90 give 90% or greater curing effici -
is apparent on the concrete surface.
cy when tested to BS 7542 and comply with BS8110 Part 1,
clause 6.6.3(c), ASTM C309 and AASHTO M148. Concure Application
90 Aluminised, complies with DTp specification for Highway
Concure 90 should be applied by spray, with the spray nozzle
Works, Cl. 1027.
being held approximately 450mm from the concrete surface.

Specification Application should pass back and forth to ensure complete

coverage, and pump pressure maintained to give an even,
The high efficien , curing compound shall be Concure 90, a
fine spra .
low viscosity, resin emulsion supplied by Fosroc. The curing
compound shall have a curing efficienc of at least 90% in After spraying, no further application of water or other material
accordance with BS7542; shall comply with BS 8110; Part 1, is necessary to ensure continued curing. The concrete surface
clause 6.6.3(c), ASTM C309 and AASHTO M148. should not be disturbed until it has sufficien strength to bear
surface loads.The applied film should not be trafficke until
fully dry, and care should be taken to ensure that the film is
not broken.
Concure 90*
Concure 90*

Concure 90 may also be applied to newly hardened concrete Technical support

immediately after demoulding, which should be damp, not dry.
Fosroc offers a comprehensive technical support service to
Surfaces which are dry will lead to problematic absorption of
specifiers, end users and contractors. It is also able to offer
the membrane, preventing proper film formation and causing
on-site technical assistance, an AutoCAD facility and dedicated
removal difficulties at a later dat
specification assistance in locations all over the world
Equipment
Estimating
Motorised or knapsack spray equipment, which produces a fine
spray, is recommended for use with Concure 90. Supply
Concure 90 : 200 litre packs
Cleaning
Fosroc Solvent 102 : 5 litre packs
Spray equipment should be cleaned immediately after use by
Coverage
flushing through with water. Any residual traces of resin which
are left in the nozzle may be cleaned with Fosroc Solvent 102*. Coverage figures quoted for Concure 90 are indicative; and
based upon application to fresh or damp concrete at the appro-
Overcoating and removal
priate time. Care should be taken to ensure that the concrete is
Concure 90 must be removed from concrete substrates before indeed ready to accept the curing membrane.
subsequent coating works commence, to promote proper bond
Application rates outside the range given below may be used
between the concrete and the applied coating. Although the
if necessary, but it is recommended to first contact your local
membrane will be slowly removed by normal traffickin and UV
Fosroc offic
exposure, this is likely to be inconsistent. To ensure complete
removal use high pressure steam or water blasting, or light
Concure 90 : 3.5 to 5.0 m2/litre
sand blasting.

Storage
Limitations
When stored in warehouse conditions below 35ºC, Concure 90 has
- Concure 90 should only be re-circulated using a low shear
a minimum shelf life of 12 months for the clear version, and 6
diaphragm pump.
months for the pigmented.
- Concure 90 should not be applied onto dry surfaces, which
Freezing and exposure to heat and/or direct sunlight should
may lead to absorption and staining which will be difficul to
be avoided.
remove at a later date.
Containers should be kept sealed and airtight to prevent any
- Any concrete surfaces which receive treatment with Concure
reduction in shelf life.
90 should not be disturbed until the concrete has gained
sufficient strength to bear surface loadin
Precautions
- Concure 90 is not an aesthetic coating. It should therefore
be removed from the concrete after 28 days.

- Concure 90 once applied, changes its colour and turns

to yellow, brown or darker shades under the influence of
sunlight.

Concure 90 - Page 2 of 4
Concure 90*

Health and safety

Concure 90 does not fall into the hazardous classifications of

current regulations. However, it should not be swallowed or
allowed to come into contact with skin or eyes, in either spray
or bulk form.

Suitable protective gloves and goggles should be worn at all

times.

Splashes on the skin should be removed with water. In case

of contact with eyes, rinse immediately with plenty of water
and seek medical advice. If swallowed seek medical attention
immediately - do not induce vomiting.

For further information, please consult the Material Safety Data

Sheet for this product.

Fire

Concure 90 is non-flammable

Cleaning and disposal

Spillages of Concure 90 should be absorbed onto sand, earth

or vermiculite and transferred to suitable containers. Remnants
should be hosed down with large quantities of water.

The disposal of excess or waste material should be carried out

in accordance with local legislation, under the guidance of the
local waste regulatory authority.

Concure 90 - Page 3 of 4
Concure 90*

Additional Information

Fosroc manufactures a wide range of complementary products

which include :

 waterproofing membranes & waterstops

 joint sealants & filler board

 cementitious & epoxy grouts

 specialised flooring material

Fosroc additionally offers a comprehensive package of prod-

ucts specifically designed for the repair and refurbishment of
damaged concrete. Fosroc’s ‘Systematic Approach’ to concrete
repair features the following :

 hand-placed repair mortars

 spray grade repair mortars

 fluid micro-concrete

 chemically resistant epoxy mortars

 anti-carbonation/anti-chloride protective coatings

 chemical and abrasion resistant coatings

For further information on any of the above, please consult your

local Fosroc office - as bel .

* Denotes the trademark of Fosroc International Limited

†
See separate data sheet

Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions for the Supply of
Goods and Service. All Fosroc datasheets are updated on a regular basis. It is the user’s responsibility to obtain the recent version.

Head Office
telephone: (+9714) 2039699 fax: (+9714) 2859649 email: agf@fosroc.com
Al Gurg Fosroc LLC
Regional offices
Post Box 657, Dubai Abu Dhabi, Al Gurg Fosroc telephone: 673 1779 fax: 673 1449 email: abudhabi@fosroc.com
Bahrain, YBA Kanoo telephone: 17738200 fax: 17732828 email: bahrain@fosroc.com
United Arab Emirates Kuwait, Boodai telephone: 4817618 fax: 4832124 email: kuwait@fosroc.com
Oman, Al Amana telephone: 24815080 fax: 24817554 email: oman@fosroc.com
www.fosroc.com

UAE/0532/08/B
MSDS
Revision date: 07/11/2019 Revision: 2 Supersedes date: 25/07/2010

SAFETY DATA SHEET

CONCURE 90 CLEAR

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1.1. Product identifier

Product name CONCURE 90 CLEAR

Product number 1197203AE1

1.2. Relevant identified uses of the substance or mixture and uses advised against
Identified uses Concrete curing compound

1.3. Details of the supplier of the safety data sheet

Supplier Al Gurg Fosroc LLC
PO Box 657
Dubai
United Arab Emirates
+ 971 4 2858606

1.4. Emergency telephone number

Emergency telephone +97142039699 (08:00 to 16:30) // +971506258232 (16:30 to 08:00)GMT+4

SECTION 2: Hazards identification

2.1. Classification of the substance or mixture

Classification (EC 1272/2008)
Physical hazards Flam. Liq. 3 - H226

Health hazards Skin Irrit. 2 - H315 Repr. 2 - H361 STOT SE 3 - H336 STOT RE 1 - H372 Asp. Tox. 1 - H304

Environmental hazards Aquatic Chronic 2 - H411

Human health Vapours and spray/mists in high concentrations are narcotic. Symptoms following
overexposure may include the following: Headache. Fatigue. Dizziness. Nausea, vomiting.
Irritating to eyes.

Physicochemical The product is flammable. Heating may generate flammable vapours.

2.2. Label elements

Hazard pictograms

Signal word Danger

1/9
Revision date: 07/11/2019 Revision: 2 Supersedes date: 25/07/2010

CONCURE 90 CLEAR

Hazard statements H226 Flammable liquid and vapour.

H315 Causes skin irritation.
H361 Suspected of damaging fertility or the unborn child.
H336 May cause drowsiness or dizziness.
H372 Causes damage to organs through prolonged or repeated exposure.
H304 May be fatal if swallowed and enters airways.
H411 Toxic to aquatic life with long lasting effects.

Precautionary statements P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No
smoking.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing.
Rinse skin with water or shower.
P501 Dispose of contents/ container in accordance with national regulations.

Contains NAPHTHA (PETROLEUM), HYDRODESULFURIZED HEAVY

Supplementary precautionary P201 Obtain special instructions before use.

statements P202 Do not handle until all safety precautions have been read and understood.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof electrical equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P260 Do not breathe vapour/ spray.
P261 Avoid breathing vapour/ spray.
P264 Wash contaminated skin thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/ doctor.
P302+P352 IF ON SKIN: Wash with plenty of water.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P308+P313 IF exposed or concerned: Get medical advice/ attention.
P312 Call a POISON CENTRE/doctor if you feel unwell.
P314 Get medical advice/ attention if you feel unwell.
P321 Specific treatment (see medical advice on this label).
P331 Do NOT induce vomiting.
P332+P313 If skin irritation occurs: Get medical advice/ attention.
P362+P364 Take off contaminated clothing and wash it before reuse.
P370+P378 In case of fire: Use foam, carbon dioxide, dry powder or water fog to extinguish.
P391 Collect spillage.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P403+P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.

2.3. Other hazards

This product does not contain any substances classified as PBT or vPvB.

SECTION 3: Composition/information on ingredients

3.2. Mixtures

2/9
Revision date: 07/11/2019 Revision: 2 Supersedes date: 25/07/2010

CONCURE 90 CLEAR

NAPHTHA (PETROLEUM), HYDRODESULFURIZED 60-100%

HEAVY
CAS number: 64742-82-1 EC number: 265-185-4

Classification
Flam. Liq. 3 - H226
Skin Irrit. 2 - H315
Repr. 2 - H361
STOT SE 3 - H336
STOT RE 1 - H372
Asp. Tox. 1 - H304
Aquatic Chronic 2 - H411

1,2,4-TRIMETHYLBENZENE <1%
CAS number: 95-63-6 EC number: 202-436-9

Classification
Flam. Liq. 3 - H226
Acute Tox. 4 - H332
Skin Irrit. 2 - H315
Eye Irrit. 2 - H319
STOT SE 3 - H335
Aquatic Chronic 2 - H411

The Full Text for all R-Phrases and Hazard Statements are Displayed in Section 16.
Composition comments The data shown are in accordance with the latest EC Directives.

SECTION 4: First aid measures

4.1. Description of first aid measures

General information Move affected person to fresh air and keep warm and at rest in a position comfortable for
breathing. Never give anything by mouth to an unconscious person. Get medical attention if
any discomfort continues.

Inhalation Place unconscious person on their side in the recovery position and ensure breathing can
take place. When breathing is difficult, properly trained personnel may assist affected person
by administering oxygen. Get medical attention if any discomfort continues.

Ingestion Rinse mouth thoroughly with water. Give plenty of water to drink. Give milk instead of water if
readily available. Keep affected person under observation. Do not induce vomiting. If vomiting
occurs, the head should be kept low so that vomit does not enter the lungs. Get medical
attention immediately. Show this Safety Data Sheet to the medical personnel.

Skin contact Immediately remove contaminated clothing. Rinse immediately with plenty of water. Remove
contaminated clothing.

Eye contact Remove any contact lenses and open eyelids wide apart. Continue to rinse for at least 15
minutes. Get medical attention promptly if symptoms occur after washing.

4.2. Most important symptoms and effects, both acute and delayed
Inhalation Gas or vapour may irritate the respiratory system. High concentrations may be fatal.

Ingestion May be fatal if swallowed and enters airways.

Skin contact Causes skin irritation.

3/9
Revision date: 07/11/2019 Revision: 2 Supersedes date: 25/07/2010

CONCURE 90 CLEAR

Eye contact Causes eye irritation.

4.3. Indication of any immediate medical attention and special treatment needed
Notes for the doctor Treat symptomatically.

SECTION 5: Firefighting measures

5.1. Extinguishing media

Suitable extinguishing media Extinguish with foam, carbon dioxide, dry powder or water fog.

Unsuitable extinguishing Do not use water jet as an extinguisher, as this will spread the fire.
media

5.2. Special hazards arising from the substance or mixture

Specific hazards Thermal decomposition or combustion products may include the following substances: Toxic
gases or vapours.

5.3. Advice for firefighters

Protective actions during Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective
firefighting clothing. Cool containers exposed to flames with water until well after the fire is out. Control
run-off water by containing and keeping it out of sewers and watercourses.

Special protective equipment Wear positive-pressure self-contained breathing apparatus (SCBA) and appropriate protective
for firefighters clothing.

SECTION 6: Accidental release measures

6.1. Personal precautions, protective equipment and emergency procedures

Personal precautions Wear protective clothing as described in Section 8 of this safety data sheet.

6.2. Environmental precautions

Environmental precautions Do not discharge into drains or watercourses or onto the ground. Spillages or uncontrolled
discharges into watercourses must be reported immediately to the Environmental Agency or
other appropriate regulatory body.

6.3. Methods and material for containment and cleaning up

Methods for cleaning up Keep combustible materials away from spillage. Eliminate all sources of ignition. No smoking,
sparks, flames or other sources of ignition near spillage. Provide adequate ventilation. Absorb
in vermiculite, dry sand or earth and place into containers. Place waste in labelled, sealed
containers. Wash thoroughly after dealing with a spillage.

6.4. Reference to other sections

Reference to other sections For waste disposal, see Section 13.

SECTION 7: Handling and storage

7.1. Precautions for safe handling

Usage precautions Keep away from heat, sparks and open flame. Avoid spilling. Provide adequate ventilation.
Avoid inhalation of vapours. Use approved respirator if air contamination is above an
acceptable level.

7.2. Conditions for safe storage, including any incompatibilities

Storage precautions Keep away from oxidising materials, heat and flames. Store in tightly-closed, original
container in a dry, cool and well-ventilated place. Avoid contact with oxidising agents.

Storage class Flammable liquid storage.

7.3. Specific end use(s)

4/9
Revision date: 07/11/2019 Revision: 2 Supersedes date: 25/07/2010

CONCURE 90 CLEAR

Specific end use(s) The identified uses for this product are detailed in Section 1.2.

SECTION 8: Exposure controls/Personal protection

8.1. Control parameters

Occupational exposure limits
NAPHTHA (PETROLEUM), HYDRODESULFURIZED HEAVY
Long-term exposure limit (8-hour TWA): 20 ppm 116 mg/m³
Short-term exposure limit (15-minute): 50 ppm 290 mg/m³
1,2,4-TRIMETHYLBENZENE
Long-term exposure limit (8-hour TWA): WEL 25 ppm 125 mg/m³
Short-term exposure limit (15-minute): WEL
WEL = Workplace Exposure Limit

Ingredient comments WEL = Workplace Exposure Limits

NAPHTHA (PETROLEUM), HYDRODESULFURIZED HEAVY (CAS: 64742-82-1)

DNEL Workers - Inhalation; systemic effects: 1300 mg/m3/ 15 mins

8.2. Exposure controls

Protective equipment

Appropriate engineering Provide adequate general and local exhaust ventilation. Observe any occupational exposure
controls limits for the product or ingredients. All handling should only take place in well-ventilated
areas.

Eye/face protection Wear chemical splash goggles.

Hand protection Wear protective gloves made of the following material: Neoprene. Nitrile rubber. Rubber
(natural, latex).

Other skin and body Wear appropriate clothing to prevent any possibility of skin contact.
protection

Hygiene measures Provide eyewash station. Wash at the end of each work shift and before eating, smoking and
using the toilet. Promptly remove any clothing that becomes contaminated. Use appropriate
skin cream to prevent drying of skin. Do not eat, drink or smoke when using this product.

Respiratory protection Use an approved air purifying respirator with replaceable filter cartage comply with EN 140and
filter EN 141: Organic Vapour cartridge type A1

SECTION 9: Physical and chemical properties

9.1. Information on basic physical and chemical properties

Appearance Liquid.

Colour Straw.

Odour Aromatic.

Initial boiling point and range 150-200°C @

Flash point 40°C

Relative density 0.845 @ 20°C

5/9
Revision date: 07/11/2019 Revision: 2 Supersedes date: 25/07/2010

CONCURE 90 CLEAR

Solubility(ies) Insoluble in water.

Auto-ignition temperature >200°C

Explosive properties Not considered to be explosive.

Explosive under the influence Not considered to be explosive.

of a flame

Oxidising properties Does not meet the criteria for classification as oxidising.

9.2. Other information

Other information No data available.

SECTION 10: Stability and reactivity

10.1. Reactivity
Reactivity Stable at normal ambient temperatures and when used as recommended.

10.2. Chemical stability

Stability Stable under the prescribed storage conditions.

10.3. Possibility of hazardous reactions

Possibility of hazardous Heating may generate flammable vapours.
reactions

10.4. Conditions to avoid

Conditions to avoid Avoid heat, flames and other sources of ignition. Avoid excessive heat for prolonged periods
of time.

10.5. Incompatible materials

Materials to avoid Keep away from oxidising materials, heat and flames.

10.6. Hazardous decomposition products

Hazardous decomposition Oxides of carbon. Thermal decomposition or combustion may liberate carbon oxides and
products other toxic gases or vapours.

SECTION 11: Toxicological information

11.1. Information on toxicological effects

Reproductive toxicity
Reproductive toxicity - May damage the unborn child.
development

General information Prolonged and repeated contact with solvents over a long period may lead to permanent
health problems.

Inhalation Gas or vapour in high concentrations may irritate the respiratory system. Symptoms following
overexposure may include the following: Coughing.

Ingestion May be fatal if swallowed and enters airways. Gastrointestinal symptoms, including upset
stomach.

Skin contact Product has a defatting effect on skin. May cause allergic contact eczema.

Eye contact Irritating to eyes. Symptoms following overexposure may include the following: Redness.
Pain.

6/9
Revision date: 07/11/2019 Revision: 2 Supersedes date: 25/07/2010

CONCURE 90 CLEAR

SECTION 12: Ecological information

Ecological information on ingredients.

NAPHTHA (PETROLEUM), HYDRODESULFURIZED HEAVY

Ecotoxicity Toxic to aquatic life. May cause long lasting harmful effects to aquatic life.

12.1. Toxicity
Toxicity The product contains a substance which is toxic to aquatic organisms.

12.2. Persistence and degradability

Persistence and degradability Not expected to be readily biodegradable.

12.3. Bioaccumulative potential

Bioaccumulative potential Not determined.

12.4. Mobility in soil

Mobility The product is immiscible with water and will spread on the water surface.

12.5. Results of PBT and vPvB assessment

Results of PBT and vPvB This product does not contain any substances classified as PBT or vPvB.
assessment

12.6. Other adverse effects

Other adverse effects None known.

SECTION 13: Disposal considerations

13.1. Waste treatment methods

General information Waste should be treated as controlled waste. Dispose of waste to licensed waste disposal site
in accordance with the requirements of the local Waste Disposal Authority.

Disposal methods Dispose of waste to licensed waste disposal site in accordance with the requirements of the
local Waste Disposal Authority. Containers should be thoroughly emptied before disposal
because of the risk of an explosion. Absorb in vermiculite, dry sand or earth and place into
containers. Dispose of waste via a licensed waste disposal contractor.

SECTION 14: Transport information

14.1. UN number
UN No. (ADR/RID) 1993

UN No. (IMDG) 1993

UN No. (ICAO) 1993

UN No. (ADN) 1993

14.2. UN proper shipping name

Proper shipping name FLAMMABLE LIQUID, N.O.S. (CONTAINS NAPHTHA (PETROLEUM),
(ADR/RID) HYDRODESULFURIZED HEAVY, 1,2,4-TRIMETHYLBENZENE)

Proper shipping name (IMDG) FLAMMABLE LIQUID, N.O.S. (CONTAINS NAPHTHA (PETROLEUM),
HYDRODESULFURIZED HEAVY, 1,2,4-TRIMETHYLBENZENE)

Proper shipping name (ICAO) FLAMMABLE LIQUID, N.O.S. (CONTAINS NAPHTHA (PETROLEUM),
HYDRODESULFURIZED HEAVY, 1,2,4-TRIMETHYLBENZENE)

7/9
Revision date: 07/11/2019 Revision: 2 Supersedes date: 25/07/2010

CONCURE 90 CLEAR

Proper shipping name (ADN) FLAMMABLE LIQUID, N.O.S. (CONTAINS NAPHTHA (PETROLEUM),
HYDRODESULFURIZED HEAVY, 1,2,4-TRIMETHYLBENZENE)

14.3. Transport hazard class(es)

ADR/RID class 3

ADR/RID classification code F1

ADR/RID label 3

IMDG class 3

ICAO class/division 3

ADN class 3

Transport labels

14.4. Packing group

ADR/RID packing group III

IMDG packing group III

ICAO packing group III

ADN packing group III

14.5. Environmental hazards

Environmentally hazardous substance/marine pollutant

14.6. Special precautions for user

EmS F-E, S-E

ADR transport category 3

Emergency Action Code •3Y

Hazard Identification Number 30

(ADR/RID)

Tunnel restriction code (D/E)

14.7. Transport in bulk according to Annex II of MARPOL and the IBC Code
Transport in bulk according to Not applicable.
Annex II of MARPOL 73/78
and the IBC Code

SECTION 15: Regulatory information

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
EU legislation Regulation (EC) No 1907/2006 of the European Parliament and of the Council of 18
December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) (as amended).

8/9
Revision date: 07/11/2019 Revision: 2 Supersedes date: 25/07/2010

CONCURE 90 CLEAR

15.2. Chemical safety assessment

No chemical safety assessment has been carried out.

SECTION 16: Other information

General information The user must be instructed in the proper work procedure and be familiar with the contents of
these instructions.

Revision comments NOTE: Lines within the margin indicate significant changes from the previous revision.

Revision date 07/11/2019

Revision 2

Supersedes date 25/07/2010

Hazard statements in full H226 Flammable liquid and vapour.

H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H336 May cause drowsiness or dizziness.
H361 Suspected of damaging fertility or the unborn child.
H372 Causes damage to organs through prolonged or repeated exposure.
H411 Toxic to aquatic life with long lasting effects.

The information on this data sheet represents our current data and is reliable provided that the product is used under the
prescribed conditions and in accordance with the application specified on the packaging and/or in the technical guidance
literature. Any other use of the product which involves using the product in combination with any other product or any other
process is the responsibility of the user.

9/9
Test report
Job reference