ELECTRICAL NOTES:

1. THE ELECTRICAL INSTALLATION SHOWN ON THE PLANS SHALL CONFORM WITH THE LATEST EDITION OF
THE PHILIPINE ELECTRIC CODE, RULES AND REGULATIONS OF THE LOCAL ELECTRIC COMPANY AND THE
LOCAL GOVERNMENT. 12 0.82 180
2. ALL ELECTRICAL MATERIALS AND EQUIPMENT TO BE USED IN THIS PROJECT SHALL BE BRAND-NEW AND 10 0.68 150
APPROVED QUALITY AND BRAND
8 0.55 120
3. THERE SHALL BE ONLY ONE SERVICE DROP FROM THE NEAREST ELECTRIC COMPANY POLE TO THE
PROPOSED BUILDING 8 0.55 120

4. WIRES TO BE USED SHALL NOT BE SMALLER THAN 3.5mm TW., WITH 600 - VOLTS INSULATION 16 1.09 240

5. THE TYPE OF POWER SERVICE TO BE SUPPLIED SHALL BE SINGLE PHASE, 220 V, A.C. 9 0.61 135

6. MOUNTING HEIGHT OF ELECTRICAL DEVICES SHALL BE AS FOLLOWS: 8 0.55 120

a. WALL SWITCHES - - - - - - - - - - - - - 1.37 METERS ABOVE FLOOR LINE 8 7 0.48 105
b. CONVENIENCE OUTLETS - - - - - - - - 0.30 METERS ABOVE FLOOR LINE
c. PANEL BOARD - - - - - - - - - - - - - - - - 1.80 TOP OF PANEL METERS ABOVE FLOOR LINE 9 11 0.75 165
d. KILOWATT - HOUR METER - - - - - - - 1.85 METERS FROM GROUND TO CENTER OF METER
e. WASHING MACHINE OUTLET - - - - - 1.50 M 10 11 0.75 165
7. A COLOR CODE FOR ALL WIRINGS DURING INSTALLATION MUST BE OBSERVED
11 9 0.61 135
a. WHITE - NEUTRAL
b. GREEN - GROUND 12 10 0.68 150
c. BLUE AND REST OF COLORS - PHASE WIRES
13 5 8.18 1800
8. ALL MATERIALS AND EQUIPMENTS TO BE USED SHALL BE BRAND NEW AND APPROVED AS TO LOCATIONS
AND PURPOSE, AND SOLIDLY GROUNDED. 14 4 6.55 1440
9. MINIMUM SIZE OF WIRES AND CONDUITS SHALL BE 3 - 5 mm², THHN DURAFLEX OR APPROVED EQUAL, AND 15 3 4.91 1080
20 mm Ø PVC, VENDEX OR APPROVED EQUAL.
16 4 6.55 1440
10. MEGGER TEST MUST BE CONDUCTED AS A REQUISITE OF SIGNING ELECTRICAL SERVICE CONNECTIONS.
ANY ELECTRICAL AFFECTED BY ACTUAL CONDITIONS OR REVISIONS BE SIGNING ELECTRICAL ENGINEER 17 5 8.18 1800
MUST BE CONSULTED FOR FINAL APPROVAL.
SERVICE CAP
18 4 6.55 1440
11. SERVICE ENTRANCE SHALL BE INSTALLED UNDERGROUND WITH 2-38sq. mm. THW CU WIRE
2 - 50.0 mm² THW IN 2" Ø RSC. MAIN PROTECTION EQUIPMENT SHALL BE 150 AMPS. IN 40mm PVC PIPE 19 5 8.18 1800
M K/HR METER
12. IN THE INTERPRETATION OF THE DRAWING, INDICATED DIMENSIONS SHALL GOVERN AND DISTANCES 20 5 8.18 1800
AND SIZES SHALL NOT BE SCALED
21 4 6.55 1440
1-150A, 2P, 230V 22 3 4.91 1080

23 5 8.18 1800

24 4 6.55 1440
20 AT 20 AT
12 - CEILING LIGHT OUTLET 10 - CEILING LIGHT OUTLET
1 2 25
20 AT 20 AT
3
8 - CEILING LIGHT OUTLET 8 - CEILING LIGHT OUTLET
4
26
THE SITE 20 AT 20 AT
16 - CEILING LIGHT OUTLET 9 - CEILING LIGHT OUTLET
5 6

20 AT 20 AT
8 - CEILING LIGHT OUTLET 7 - CEILING LIGHT OUTLET
7 8

20 AT 20 AT
11 - CEILING LIGHT OUTLET 11 - CEILING LIGHT OUTLET
9 10

20 AT 20 AT
9 - CEILING LIGHT OUTLET 10 - CEILING LIGHT OUTLET
11 12

20 AT 20 AT
5 - CONVENIENCE OUTLET 4 - CONVENIENCE OUTLET
13 14

20 AT 20 AT
91.59
3 - CONVENIENCE OUTLET 4 - CONVENIENCE OUTLET
15 16
115
20 AT 20 AT
5 - CONVENIENCE OUTLET 4 - CONVENIENCE OUTLET
17 18

20 AT 20 AT
5 - CONVENIENCE OUTLET 5 - CONVENIENCE OUTLET
19 20

VICINITY MAP 21
4 - CONVENIENCE OUTLET
20 AT 20 AT
3 - CONVENIENCE OUTLET
22

SCALE: NDTS 20 AT 20 AT
5 - CONVENIENCE OUTLET 4 - CONVENIENCE OUTLET
23 24

20 AT 20 AT
SPARE SPARE
25 26

GROUND

ENGINEER
OWNER ELECTRICAL
PLAN

ENGINEER