0% found this document useful (0 votes)
8 views3 pages

Te Axicom V23105

The D2n Relay V23105 is a standard DIL relay with dimensions of 20x10x11mm and a switching current of 3A, featuring 2 form C contacts. It offers various coil sensitivities ranging from 150mW to over 500mW and meets FCC Part 68 surge voltage resistance requirements. Typical applications include communications, office, measurement, entertainment, medical, and consumer electronics.

Uploaded by

Carlo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
8 views3 pages

Te Axicom V23105

The D2n Relay V23105 is a standard DIL relay with dimensions of 20x10x11mm and a switching current of 3A, featuring 2 form C contacts. It offers various coil sensitivities ranging from 150mW to over 500mW and meets FCC Part 68 surge voltage resistance requirements. Typical applications include communications, office, measurement, entertainment, medical, and consumer electronics.

Uploaded by

Carlo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Signal

Signal Relays AXICOM

D2n Relay V23105

n Standard DIL relay


n Dimensions 20x10x11mm (.795x.394x.433”)
n Switching and continous current 3A
n 2 form C contacts (2 CO, 2 changeover contacts)
n Immersion cleanable
n Four different coil sensitivities, 150mW, 200mW, 400mW, >500mW
n Surge voltage resistance meets FCC Part 68 requirement: 1.5kV
(10/700μs) between coil and contacts

Typical applications
Communications equipment, office equipment, measurement and control
equipment, entertainment electronics, medical equipment, consumer
electronics.
Z
Approvals Coil Data
UL 508 File No. E 111441 Magnetic system neutral
Technical data of approved types on request Coil voltage range 3 to 48VDC
Max. coil temperature 85 °C
Contact Data Thermal resistance < 85K/W
Contact arrangement 2 form C (CO)
Max. switching voltage 220VDC, 250VAC Coil versions, monostable
Rated current 3A Coil Rated Operate Limiting Release Coil Rated coil
Limiting continuous current, 85°C 3A code voltage voltage Voltage voltage resistance power
Contact material AgNi, gold-covered VDC VDCmin. VDCmax. VDCmin. Ω±10% mW
Min. recommended contact load 10mA at 20mV 150mW coil power
Minimum switching voltage 100μV 001 5 4.0 11.7 0.25 167 150
Initial contact resistance <100mΩ at 10mA, 20mV 002 6 4.8 14.0 0.30 240 150
Frequency of operation without load max. 50 operations/s 006 9 7.2 21.0 0.45 540 150
Operate / release time max. 6ms/4ms 003 12 9.6 28.0 0.60 960 150
Bounce time max. 5 ms 005 24 19.2 56.0 1.20 3840 150
Electrical endurance 200mW coil power
at 230VAC/0.5A typ. 3x105 operations 308 3 2.1 6.1 0.15 45 200
at 6VDC/0.1A typ. 2x106 operations 301 5 3.5 10.1 0.25 125 200
at 30VDC/1A typ. 5x105 operations 302 6 4.2 12.2 0.30 180 200
at 30VDC/2A typ. 1x105 operations 306 9 6.3 18.2 0.45 405 200
Contact ratings, UL 30VDC/1.0A 303 12 8.4 24.3 0.60 720 200
100VDC/0.3A 305 24 16.8 48.6 1.20 2880 200
150mW and 200mW coil 125VAC/0.5A 307 48 33.6 97.2 2.40 11520 200
400mW and 500mW coil 125VAC/1.0A 400mW coil power
Mechanical endurance typ. 15x106 operations 401 5 3.5 7.2 0.25 62 400
402 6 4.2 8.6 0.30 90 400
406 9 6.3 12.9 0.42 203 400
403 12 8.4 17.2 0.60 360 400
405 24 16.8 34.3 1.20 1440 400
407 48 33.6 68.6 2.40 5760 400
>500mW coil power
501 5 3.5 6.1 0.25 36 695
502 6 4.2 7.3 0.30 70 515
506 9 6.3 10.9 0.45 140 580
503 12 8.4 14.5 0.60 280 515
505 24 16.8 29.1 1.20 1050 550
507 48 33.6 58.1 2.40 4000 575
All figures are given for coil without pre-energization, at ambient temperature +23°C.
Other coil voltages on request.

1
06-2014, Rev. 0614 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section,
www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are
© 2014 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change.
a TE Connectivity Ltd. company. http://relays.te.com/definitions
Signal
Signal Relays AXICOM
AXICOM
Telecom-, Signal and RF Relays 108-98007 Rev A

D2n Relay
D2n V23105 RelayV23105 (Continued)

Coil Operating Range


Coil Data (continued) Coil Data (continued)
3.0
Coil operative range graphs
3
150 mW coil
150 mW Unom Nominal coil voltage 200200 mW coil
mW
2.8 2.8
Umax Upper limit of the operative range of the coil voltage (limiting
2.6 2.6
voltage) when coils are continously energized
Umax. at 0 A Umax. at 0 A
2.4
Umax. at 2 x 1 A
2.4 Uop. min. Lower limit of the operative range
Umax. at 2 xof1 A
2.2 Umax. at 2 x 2 A 2.2 the coil voltage (reliable operate voltage)
Umax. at 2 x2A
Urel. min. Lower limit of the operative range of
Coil Voltage [U/Unom]

Coil Voltage [U/Unom]


2.0 2

1.8 1.8
the coil voltage (reliable release voltage)
1.6 1.6

1.4 AXICOM 1.4

COM 1.2
Telecom-, Signal and RF Relays
1.2
Insulation Data 108-98007 Rev A
, Signal and RF Relays 1.0 Unom. nominal coil voltage 108-98007 Rev A Initial dielectric strength
Unom. nominal coil voltage
0.8
D2n V23105 Relay 1

0.8
between open contacts 750Vrms
V23105 Relay 0.6 Uop. min. 0.6
between contact and coil 1050Vrms
Urel. min. between adjacent contacts Uop. min. 750Vrms
0.4 0.4
Urel. min.
Coil Operating Range 0.2 0.2
Initial surge withstand voltage
0.0 0
between open contacts 1500V
-30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
-30 -20 between
-10 0 10 20contact and
30 40 50 60 coil
70 80 90 100 110 120 1500V
3.0 3
Ambient Temperature [°C] 150 mW coil
150 mW between Ambient Temperature
adjacent [°C]
contacts 200 200 mW coil
mW 1500V
2.83 2.8
150 mW coil
150 mW 200 mW coil
200 mW Initial insulation resistance at 500 VDC > 109Ω
2.6 2.6
2.8
3.0
Umax. at400
0400
AmWmW coil
3.0 Capacitance Umax. at
5500550AmW
mW coil
2.4 2.4
Umax. at 0 A
2.6
2.8 Umax. at 2 x 1 A 2.8 between open contacts Umax. at 2 x 1 A max. 2pF
2.2 UUmax.
max. at 0 A
at 2 x 2 A 2.2 Umax. at 2 x 2 A
Umax. at 2 x 1 A
2.4
2.6 Umax. at 2 x 1 A
UUmax. at 0 A
2.6 between contact and coil max. 4pF
nom] nom]

nom][U/Unom]

Umax. at 2 x 2 A 2.0
max. at 2 x 2 A
2 Umax. at 0 A
2.2
2.4
Umax. at 2 x 1 A
2.4 between adjacent contacts Umax. at 2 x 1 A max. 2 pF
nom][U/U

1.82 1.8
2.2 Umax. at 2 x 2 A 2.2 Umax. at 2 x 2 A
[U/U

1.6
1.8 1.6
Voltage

Voltage

2.0 2.0
1.4
RF Data
1.4
[U/U

Coil[U/U

1.6

COM
1.8
Voltage

1.8
1.2 1.2
1.4
1.6 1.6
Isolation at 100MHz/900MHz -39.0dB/-20.7dB
Coil Coil
Coil Voltage

-, Signal and RF Relays


Coil Voltage

1.0 Unom. nominal coil voltage 108-98007 Rev A 1 Unom. nominal coil voltage
1.2
1.4
0.8
1.4
Insertion loss at 100MHz/900MHz -0.02dB/-0.27dB
Unom. nominal coil voltage
n V23105 Relay
0.8
1.21
0.6 Uop. min.
1.2
0.6
Voltage standing wave ratio (VSWR)
0.8 Unom.
Uop. min.
1.0
0.4
Urel. min.
1.0 Unom.
0.4
at 100MHz/900MHz Uop. min. 1.04/1.40
0.6
0.8
Uop. min. 0.8 Urel. min.
Urel. min. 0.2 0.2
0.4
0.6 Urel. min. 0.6
0.0 Uop. min. 0
Uop. min.
Other0 Data
0.2
0.4 0.4
-30 -20 -10 0 10 20 30 40 50 60 70 80 90 U100 110 120
rel. min. -30 -20 -10 10 20 30 40 50 60 70 80 U
rel. min.
90 100 110 120
0.20
80 90 100 110 120
-30 -20 -10 0
Ambient Temperature [°C]
10 20 30 40 50 60 70 80 90 100 110 120 Material compliance: 0.2
EU RoHS/ELV,
Ambient Temperature [°C] China RoHS, REACH, Halogen content
C] 150 mW coil
150 mW
0.03
-30 -20 -10 0 10
Ambient Temperature [°C]
20 30 40 50 60 70 80 90 100
200 mW coil
200110
mW 120 -10 0
0.0
-30 -20
refer to the Product Compliance Support Center at
10 20 30 40 50 60 70 80 90 100 110 120
2.8
3.0 Ambient Temperature [°C] 400 mW coil
3.0 Ambient Temperature [°C] www.te.com/customersupport/rohssupportcenter
550 mW coil
2.6 400 mW 550 mW
Umax. at 0400
AmW coil 2.8
3.0
Umax. at 0550AmW coil
2.8 Ambient temperature -40 to +85°C
400 mW 2.4 550 mW
Umax. at 2 x 1 A 2.6
2.8 Umax. at 2 x 1 A 2.6 Category of environmental protection
Umax. at 2 x 2 A 2.2 UUmax. at 0 A
max. at 2 x 2 A Umax. at 0 A
2.4
2.6
Umax. at 2 x 1 A
2.4 IEC 61810 Umax. at 2 x 1 A RT III - immersion cleanable
nom] nom]

Umax. at 0 A 2 Umax. at 0 A
Umax. at 2 x 1 A
2.2
2.4 Umax. at 2 x 2 A
Umax. at 2 x 1 A
2.2 Degree of protection, IEC 60529 Umax. at 2 x 2 A IP 67
nom] [U/U

1.8
Vibration resistance (functional) 10g, 10 to 55Hz
Coil Voltage [U/Unom]

Umax. at 2 x 2 A 2.0 2.0


2.2 Umax. at 2 x 2 A
1.6
[U/U

Shock resistance (functional)


Voltage

1.8
2.0 1.8
1.4 Unom1.6= Nominal coil voltage
IEC 60068-2-27 (half sine) 10g
Coil[U/U

1.6
1.8
Voltage

1.2
1.4
1.6 1.4
Umax. = Shock
Upper resistance
limit (destructive)
of the operative range of the coil voltage (limiting 50g
Voltage

1 Unom. nominal coil voltage


1.2
1.4 1.2
Terminal type
voltage) when coils are continously energized
PCB-THT
Coil Coil

0.8
Uop. min.
1.0
1.2 Unom. Weight
1.0 Unom.
max. 6g
0.6
Urel. min.
0.8
1.0 Unom. Uop. min. 0.8
Uop. min. Resistance
= Lower tooperative
limit of the soldering heat
range of THT
0.4
Urel. min.
the IEC 60068-2-20 265°C/10s
0.6
0.8 0.6
Uop. min. coil voltage (reliable operate voltage) Uop. min.
0.2
Uop. min.
0.4
0.6 Urel. min.
Uop. min.
0.4
Ultrasonic cleaning Urel. min. not recommended
0
U100
0.2
0.4 Urel. min.
0.2 = Lower limit of the operative range of
Packaging unit 1000 pcs.
80 90 110
rel. min. 120
-30 -20 -10 0 10 20 30 40 50 60 70 80 U
rel. min.
90 100 110 120
C] 0.0
0.2 Ambient Temperature [°C] 0.0 the coil voltage (reliable release voltage)
-30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
0.0
Ambient Temperature [°C] Ambient Temperature [°C]
80 90 100 110 120 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
C] 3.0 Ambient Temperature [°C]
5 of 12
400 mW coil 550 mW coil
400 mW 550
All specifications subject to change. Consult Tyco Electronics mW
for latest specifications.
2.8 Terminal assignment
2.6 TOP view on component side of PCB
Umax. at 0 A Umax. at 0 A
2.4
Umax. at 2 x 1 A Umax. at 2 x 1 A
Umax. at 2 x 2 A 2.2 Umax. at 2 x 2 A
Coil Voltage [U/Unom]

2.0

1.8 Unom = Nominal coil voltage


Unom1.6
= Nominal coil voltage
Umax. = Upper limit of the operative range of the coil voltage (limiting
1.4
Umax. = Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized
1.2
voltage) when coils are continously energized
1.0 Unom. PCB limit
Uop. min. = Lower layout
of the operative range of
0.8
Uop. min. = Lower limit of the operative range of TOP
the coilview on(reliable
voltage component side of
operate voltage) PCB
0.6
Uop. min. the coil voltage (reliable operate voltage) Uop. min.
Urel. min. 0.4
Urel. min. Urel. min. = Lower limit of the operative range of
Urel. min.
0.2 = Lower limit of the operative range of the coil voltage (reliable release voltage)
0.0
80 90 100 110 120
the coil voltage (reliable release voltage)
-30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120
C] Ambient Temperature [°C]
All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 12
o Electronics for latest specifications. 5 of 12
2
06-2014, Rev. 0614 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section,
www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are
© 2014 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change.
a TE ConnectivityUnom
Ltd.=company.
Nominal coil voltage http://relays.te.com/definitions

Umax. = Upper limit of the operative range of the coil voltage (limiting
voltage) when coils are continously energized
Signal
Signal Relays AXICOM

D2n Relay V23105 (Continued)

Dimensions Packing

Product code structure Typical product code V23105-A5 001 A201

Type
V23105-A5 D2n Series Signal Relay
Coil
Coil code: please refer to coil versions table
Coil power
0xx 150 mW 4xx 400 mW
3xx 300 mW 5xx 550 mW
Contacts
A201 2 form C, 2 CO, AgNi+Au contacts

Product Code Version Coil power Coil voltage Part number


V23105A5001A201 AgNi+Au 150mW 5VDC 8-1393792-5
V23105A5002A201 contacts 6VDC 8-1393792-7
V23105A5006A201 9VDC 9-1393792-1
V23105A5003A201 12VDC 8-1393792-8
V23105A5005A201 24VDC 9-1393792-0
V23105A5308A201 200mW 3VDC 1393793-5
V23105A5301A201 5VDC 9-1393792-3
V23105A5302A201 6VDC 9-1393792-5
V23105A5306A201 9VDC 1393793-2
V23105A5303A201 12VDC 9-1393792-7
V23105A5305A201 24VDC 9-1393792-9
V23105A5307A201 48VDC 1393793-3
V23105A5401A201 400mW 5VDC 1393793-6
V23105A5402A201 6VDC 1393793-7
V23105A5406A201 9VDC 1-1393793-0
V23105A5403A201 12VDC 1393793-8
V23105A5405A201 24VDC 1393793-9
V23105A5407A201 48VDC 1-1393793-1
V23105A5501A201 >500mW 5VDC 1-1393793-6
V23105A5502A201 6VDC 1-1393793-8
V23105A5506A201 9VDC 2-1393793-3
V23105A5503A201 12VDC 1-1393793-9
V23105A5505A201 24VDC 2-1393793-1
V23105A5507A201 48VDC 2-1393793-4
V23105A5475A201 BT 47 type 5VDC 1-1393793-2
V23105A5479A201 spec T4563C 10VDC 3-1393794-0
V23105A5476A201 (current tested) 12VDC 1-1393793-3
V23105A5477A201 24VDC 1-1393793-4
V23105A5478A201 48VDC 1-1393793-5

3
06-2014, Rev. 0614 Catalog and product specification according Catalog and product data is subject to the Catalog product data, ‘Definitions’ section,
www.te.com to IEC 61810-1 and to be used only together terms of the disclaimer and all chapters of application notes and all specifications are
© 2014 Tyco Electronics Corporation, with the ‘Definitions’ section. the ‘Definitions’ section, available at subject to change.
a TE Connectivity Ltd. company. http://relays.te.com/definitions

You might also like