60 Series - General purpose relays 6 - 10 A

Features 60.12 60.13

Plug-in mount
10 A General purpose relay
2 & 3 pole changeover contacts
Cadmium Free contacts
(preferred version)
AC coils & DC coils
UL Listed (certain relay/socket
combinations)
Contact material options
2 pole - 10 A power contacts 3 pole - 10 A power contacts
Lockable test button with mechanical flag
8 pin plug-in 11 pin plug-in
indicator (preferred version)
90 series sockets, coil EMC suppression
and timer accessories

124 225
225 216 247
143 246
124 328
111 218
143 349 60
111 3111

A12 A27
A12 A210
32.5 36.4 32.5 36.4
54.2

54.2
12.6

12.6
Contact specification
Contact configuration 2 CO (DPDT) 3 CO (3PDT)
Rated current/Maximum peak current A 10/20 10/20
Rated voltage/Maximum switching voltage V AC 250/400 250/400
Rated load AC1 VA 2,500 2,500
Rated load AC15 (230 V AC) VA 500 500
Single phase motor rating (230 V AC) kW 0.37 0.37
Breaking capacity DC1: 30/110/220 V A 10/0.4/0.15 10/0.4/0.15
Minimum switching load mW (V/mA) 500 (10/5) 500 (10/5)
Standard contact material AgNi AgNi
Coil specification
Nominal voltage (UN) V AC (50/60 Hz) 6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 - 400
V DC 6 - 12 - 24 - 48 - 60 - 110 -125 - 220
Rated power AC/DC VA (50 Hz)/W 2.2/1.3 2.2/1.3
Operating range AC (0.81.1)UN (0.81.1)UN
DC (0.81.1)UN (0.81.1)UN
Holding voltage AC/DC 0.8 UN/0.5 UN 0.8 UN/0.5 UN
Must drop-out voltage AC/DC 0.2 UN/0.1 UN 0.2 UN/0.1 UN
Technical data
Mechanical life AC/DC cycles 20 106/50 106 20 106/50 106
Electrical life at rated load AC1 cycles 200 103 200 103
Operate/release time ms 9/9 9/9
Insulation between coil and contacts (1.2/50 s) kV 3.6 3.6
Dielectric strength between open contacts V AC 1,000 1,000
Ambient temperature range C 40+70 40+70
Environmental protection RT I RT I
Approvals (according to type)

83
 60 Series - General purpose relays 6 - 10 A
Features 60.12 - 0200 60.13 - 0200
Plug-in mount - 6 A
Bifurcated contacts for low level switching
2 & 3 pole changeover contacts
Cadmium Free contacts
(Gold plated Silver Nickel)
AC coils & DC coils
Lockable test button with mechanical flag
indicator (preferred version)
90 series sockets, coil EMC suppression
2 pole - 6 A bifurcated contacts 3 pole - 6 A bifurcated contacts
and timer accessories 8 pin plug-in 11 pin plug-in

124 225
225 216 247
143 246
124 328
111 218
60 143 349
111 3111

A12 A27
A12 A210
32.5 36.4 32.5 36.4
54.2

54.2
12.6

12.6
Contact specification
Contact configuration 2 CO (DPDT) 3 CO (3PDT)
Rated current/Maximum peak current A 6/10 6/10
Rated voltage/Maximum switching voltage V AC 250/400 250/400
Rated load AC1 VA 1,500 1,500
Rated load AC15 (230 V AC) VA 250 250
Single phase motor rating (230 V AC) kW 0.185 0.185
Breaking capacity DC1: 30/110/220 V A 6/0.3/0.12 6/0.3/0.12
Minimum switching load mW (V/mA) 50 (5/5) 50 (5/5)
Standard contact material AgNi + Au bifurcated contacts AgNi + Au bifurcated contacts
Coil specification
Nominal voltage (UN) V AC (50/60 Hz) 6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 - 400
V DC 6 - 12 - 24 - 48 - 60 - 110 -125 - 220
Rated power AC/DC VA (50 Hz)/W 2.2/1.3 2.2/1.3
Operating range AC (0.81.1)UN (0.81.1)UN
DC (0.81.1)UN (0.81.1)UN
Holding voltage AC/DC 0.8 UN/0.5 UN 0.8 UN/0.5 UN
Must drop-out voltage AC/DC 0.2 UN/0.1 UN 0.2 UN/0.1 UN
Technical data
Mechanical life AC/DC cycles 20 106/50 106 20 106/50 106
Electrical life at rated load AC1 cycles 250 103 250 103
Operate/release time ms 9/9 9/9
Insulation between coil and contacts (1.2/50 s) kV 3.6 3.6
Dielectric strength between open contacts V AC 1,000 1,000
Ambient temperature range C 40+70 40+70
Environmental protection RT I RT I
Approvals (according to type)

84
 60 Series - General purpose relays 6 - 10 A
Features 60.62 60.63
Flange mount
10 A General purpose relay
Flange mount (Faston 187,
4.8x0.8 mm termination)
2 & 3 pole changeover contacts
AC coils & DC coils
Cadmium Free contacts
(preferred version)
Contacts material options
2 pole - 10 A power contacts 3 pole - 10 A power contacts
Flange mount/Faston 187 Flange mount/Faston 187

1 4 3 6 1 42 5 3 6

7 9 7 8 9

A B A B 60
A1 A2 A1 A2

32.2 36.5 32.2 36.5

3.6 3.6

52

43
52

43

7
7

7.1 18 7.1 11 9 5.9 6.2 4.4 7.1 18 7.1 11 9 5.9 6.2 4.4

Contact specification
Contact configuration 2 CO (DPDT) 3 CO (3PDT)
Rated current/Maximum peak current A 10/20 10/20
Rated voltage/Maximum switching voltage V AC 250/400 250/400
Rated load AC1 VA 2,500 2,500
Rated load AC15 (230 V AC) VA 500 500
Single phase motor rating (230 V AC) kW 0.37 0.37
Breaking capacity DC1: 30/110/220 V A 10/0.4/0.15 10/0.4/0.15
Minimum switching load mW (V/mA) 500 (10/5) 500 (10/5)
Standard contact material AgNi AgNi
Coil specification
Nominal voltage (UN) V AC (50/60 Hz) 6 - 12 - 24 - 48 - 60 - 110 - 120 - 230 - 240 - 400
V DC 6 - 12 - 24 - 48 - 60 - 110 -125 - 220
Rated power AC/DC VA (50 Hz)/W 2.2/1.3 2.2/1.3
Operating range AC (0.81.1)UN (0.81.1)UN
DC (0.81.1)UN (0.81.1)UN
Holding voltage AC/DC 0.8 UN/0.5 UN 0.8 UN/0.5 UN
Must drop-out voltage AC/DC 0.2 UN/0.1 UN 0.2 UN/0.1 UN
Technical data
Mechanical life AC/DC cycles 20 106/50 106 20 106/50 106
Electrical life at rated load AC1 cycles 200 103 200 103
Operate/release time ms 9/9 9/9
Insulation between coil and contacts (1.2/50 s) kV 3.6 3.6
Dielectric strength between open contacts V AC 1,000 1,000
Ambient temperature range C 40+70 40+70
Environmental protection RT I RT I
Approvals (according to type)

85
 60 Series - General purpose relays 6 - 10 A

Ordering information
Example: 60 series plug-in relay, 3 CO (3PDT), 12 V DC coil, test button and mechanical indicator.
A B C D

6 0 . 1 3 . 9 . 0 1 2 . 0 0 4 0
Series A: Contact material D: Special versions
0 = Standard 0 = Standard
Type
2 = AgCdO
1 = 8/11 pin plug-in C: Options
5 = AgNi + Au (5 m)
6 = Faston 187 (4.8x0.8 mm) 0 = None
with flange mount B: Contact circuit 2 = Mechanical indicator
0 = CO (nPDT) 3 = LED (AC)
No. of poles
2 = Bifurcated contacts 4 = Lockable test button +
2 = 2 pole
60.12/13 - 6 A only mechanical indicator
3 = 3 pole
5 = Lockable test button + LED (AC)
Coil version 54 = Lockable test button + LED (AC) +
4 = Current sensing mechanical indicator
8 = AC (50/60 Hz) 6 = LED + diode (DC, polarity positive
9 = DC to pin 2)
60 Coil voltage
7 = Lockable test button + LED + diode
(DC, polarity positive to pin 2)
see coil specifications
74 = Lockable test button + LED + diode
(DC, polarity positive to pin 2) +
Selecting features and options: only combinations in the same row are possible.
mechanical indicator
Preferred selections for best avaliability are shown in bold.
Type Coil version A B C D
60.12/13 AC 0-2 0 0-2-3-4-5 0
AC 0-2 0 54 /
AC 5 0- 2 0-2-3-4-5 0
AC 5 0- 2 54 /
DC 0-2 0 0-2-4-6-7 0
DC 0-2 0 74 /
DC 5 0- 2 0-2-4-6-7 0
DC 5 0- 2 74 /
current sensing 0 0 4 0
60.62/63 AC-DC 0-2-5 0 0 0

Descriptions: Options and Special versions

2 7/10 2 7/10
A1 A2 A1 A2

C: Option 3, 5, 54 C: Option 6, 7, 74
LED (AC) LED + diode (DC, polarity
positive to pin 2)

Lockable test button and mechanical flag indicator (0040)

The dual-purpose Finder test button can be used in two ways:
Case 1) The plastic pip (located directly above the test button) remains intact. In this case, when the
test button is pushed, the contacts operate. When the test button is released the contacts return to their
former state.
Case 2) The plastic pip is broken-off (using an appropriate cutting tool). In this case, (in addition to
the above function), when the test button is pushed and rotated, the contacts are latched in the
operating state, and remain so until the test button is rotated back to its former position.
In both cases ensure that the test button actuation is swift and decisive.

86
 60 Series - General purpose relays 6 - 10 A

Technical data
Insulation
Insulation according to EN 61810-1 ed. 2 insulation rated voltage V 250 400
rated impulse withstand voltage kV 4 (2 pole) 3.6 (3 pole) 4 (2 pole) 3.6 (3 pole)
pollution degree 3 2
overvoltage category III III
Insulation between coil and contacts (1.2/50 s) kV 3.6
Dielectric strength between open contacts V AC 1,000
Dielectric strength between adjacent contacts V AC 2,000
Conducted disturbance immunity
Burst (5...50)ns, 5 kHz, on A1 - A2 EN 61000-4-4 level 4 (4 kV)
Surge (1.2/50 s) on A1 - A2 (differential mode) EN 61000-4-5 level 4 (4 kV)
Other data
Bounce time: NO/NC ms 2/4
Vibration resistance (555)Hz, max. 1 mm: NO/NC g/g 22/22
Shock resistance g 20
Power lost to the environment 2 pole 3 pole 60
without contact current W 1.3 1.3
with rated current W 2.7 3.4

Contact specification
F 60 - Electrical life (AC) v contact current H 60 - Maximum DC1 breaking capacity
7
10 20
10
3 contacts in series
DC breaking current (A)

1 2
6
4
Cycles

6 Resistive load - cos = 1 2

10
Inductive load - cos = 0.4 1

0.2
5
10 0.1
0 4 8 12 16 20 60 100 140 180 220
(A) DC voltage (V)

When switching a resistive load (DC1) having voltage and current

values under the curve, an electrical life of 100103 can be expected.
In the case of DC13 loads, the connection of a diode in parallel with
the load will permit a similar electrical life as for a DC1 load.
Note: the release time for the load will be increased.

Coil specifications
DC coil data AC coil data
Nominal Coil Operating range Resistance Rated coil Nominal Coil Operating range Resistance Rated coil
voltage code consumption voltage code consumption
UN Umin Umax R I at UN UN Umin Umax R I at UN (50Hz)
V V V mA V V V mA
6 9.006 4.8 6.6 28 214 6 8.006 4.8 6.6 4.6 367
12 9.012 9.6 13.2 110 109 12 8.012 9.6 13.2 19 183
24 9.024 19.2 26.4 445 53.9 24 8.024 19.2 26.4 74 90
48 9.048 38.4 52.8 1,770 27.1 48 8.048 38.4 52.8 290 47
60 9.060 48 66 2,760 21.7 60 8.060 48 66 450 37
110 9.110 88 121 9,420 11.7 110 8.110 88 121 1,600 20
125 9.125 100 137.5 12,000 10.4 120 8.120 96 132 1,940 18.6
220 9.220 176 242 37,300 5.8 230 8.230 184 253 7,250 10.5
240 8.240 192 264 8,500 9.2
400 8.400 320 440 19,800 6

87
 60 Series - General purpose relays 6 - 10 A

Coil specifications
R 60 - DC coil operating range v ambient temperature R 60 - AC coil operating range v ambient temperature

U 2.0 U 2.0
UN UN

1.5 1.5

1
1
1.0 1.0
2
2
0.5 0.5
-20 -10 0 10 20 30 40 50 60 70 80 -20 -10 0 10 20 30 40 50 60 70 80
(C) (C)

1 - Max. permitted coil voltage. 1 - Max. permitted coil voltage.

2 - Min. pick-up voltage with coil at ambient temperature. 2 - Min. pick-up voltage with coil at ambient temperature.

60
Current sensing version
Current sensing DC coil data
L
C Coil code Imin (A) IN (A) Imax (A) R ()
4202 1.7 2.0 2.4 0.15
4182 1.5 1.8 2.2 0.19
L1 L2 S1
4162 1.4 1.6 1.9 0.24
4142 1.2 1.4 1.7 0.31
K1 4122 1.0 1.2 1.4 0.42
4102 0.85 1.0 1.2 0.61
4092 0.8 0.9 1.1 0.75
4062 0.5 0.6 0.7 1.70
4032 0.25 0.3 0.4 6.70
N 4012 0.085 0.1 0.15 61

Typical application with current sensing relays.

An open circuit filiment of lamp L1 is detected by the current sensing Current sensing AC coil data
relay coil (K1) which causes the back-up safety lamp L2 to be energised, Coil code Imin (A) IN (A) Imax (A) R ()
and indication of failure at the control panel via lamp S1. 4251 2.1 2.5 3.0 0.05
Example: navigation light. 4181 1.5 1.8 2.2 0.10
L1 = Light 4161 1.4 1.6 1.9 0.12
L2 = Safety light
4121 1.0 1.2 1.4 0.22
S1 = Control light
4101 0.85 1.0 1.2 0.32
K1 = Relay
4051 0.42 0.5 0.6 1.28
4041 0.34 0.4 0.5 2.00
4031 0.25 0.3 0.4 3.57
4021 0.17 0.2 0.25 8.0
4011 0.085 0.1 0.15 32.1
Other types of current sensing relays are available on request.

Accessories
Sheet of marker tags for relay types 60.12 and 60.13, plastic, 72 tags, 6x12 mm 060.72

060.72

88
 60 Series
General Purpose Relays 10 A

ORDERING INFORMATION
Example: a 60 series P.C.B.relay, 3 CO (3PDT) with coil rated 12 V DC.

6 0 4 3 9 0 1 2 0 0 0 0
Series No. of poles Coil version Contact material Options
2 = 2 CO (DPDT) 3 = DC diode in parallel to and contact circuit 00 = Standard
3 = 3 CO (3PDT) coil (positive to pin 2) 00 = Standard
8 = AC (50/60 Hz) 20 = AgCdO
9 = DC 50 = AgNi + 5m Au

Type Coil voltage

4 = P.C.B. 006 = 6V
012 = 12 V
024 = 24 V
048 = 48 V
060 = 60 V
110 = 110 V
120 = 120 V AC only
230 = 230 V AC only
240 = 240 V AC only

OPTIONS

2 7 2 7 7 2 7 2
10 10 10 10
Coil version = 3 Option = 0030 Option = 0060 - 0070 Option = 0080 - 0090

62
 60 Series
General Purpose Relays 10 A

TECHNICAL DATA
DIELECTRIC STRENGTH between coil and contacts 2,000 V
tested at leakage current between open contacts 2,000 V
10 mA for 1 min at 50 Hz between adjacent contacts 1,000 V
between frame and live parts 2,000 V
SURGE TEST (1.2/50 s) 2,500 V
BETWEEN COIL AND CONTACTS
ISOLATION RESISTANCE 20 103 M
ISOLATION GROUP C 250
MAXIMUM SWITCHING
FREQUENCY - without load 36,000 cycles/h
- at rated load 1,800 cycles/h
60.43
AMBIENT TEMPERATURE (40 ... +70)C
MECHANICAL LIFE 20 106 cycles version AC
BEAB GOST RINA C
50 106 cycles version DC
PROTECTION CATEGORY IP 40
OF ENCLOSURES
P.C.B. RELAYS 10 A OPERATE AND RELEASE TIME
TYPE 60.42 2 CO (DPDT)
- pick-up time (0 to UN) 15 ms (including contact bounce)
TYPE 60.43 3 CO (3PDT)
- Tin plated copper pins (1.2 x 0.5 mm) - drop-out time (UN to 0) 15 ms (including contact bounce)
- Standard contact material: AgNi TYPE OF DUTY continuous
- Options: see coding table page 62 DIELECTRIC TEST
- Ordering information: see page 62 2
TYPE OF RELAY all-or-nothing

32.2 32.2 36
43
6

7.1 18 7.1 7.1 9 7.1 10.8 9 6 5.9 4.3

60.42 60.43

1 4 3 6 1 4 2 5 3 6

7 9 7 8 9

10 11 10 11

60.42 60.43

copper side view

32.2 32.2
7.1 18 7.1 7.1 9 9 7.1

4.3 4.3
1 3 5.9 1 2 3 5.9
1.5

1.5

4 6 6 4 5 6 6
36

36

7 9 7 8 9
9 9
10 11 10 11
10.8 10.8

60.42 60.43

58
 60 Series
General Purpose Relays 10 A

CONTACT SPECIFICATIONS
RATED CURRENT 10 A
MAXIMUM PEAK CURRENT 20 A
NOMINAL RATE IN AC1 2,500 VA
NOMINAL RATE IN AC15 500 VA
RATED VOLTAGE 250 V AC
MAXIMUM SWITCHING VOLTAGE 400 V AC
BREAKING CAPACITY IN DC1 see diagram H 60
SINGLE PHASE HP MOTOR RATING 0.37 kW/0.6 HP
CONTACT RESISTANCE: - initial 50 m
MINIMUM SWITCHING LOAD 500 mW (10 V/5 mA)
STANDARD CONTACT MATERIAL AgNi

F 60 H 60
7
10 20
A B C
10

MAX SWITCHING CURRENT (A)

6
4
CYCLES

2
106
1
0.6
0.4

0.2

105 0.1
20 60 100 140 180 220
0 0.5 1 1.5 2 2.5 3

LOAD (kVA) VOLTAGE DC (V)

Contact life vs AC1 load at 1800 cycles/h. Breaking capacity for DC1 load at 1800 cycles/h.
A = load applied to 1 contact
B = load applied to 2 contacts in series
C = load applied to 3 contacts in series

K 60

1
k REDUCTION FACTOR

0.8
k
0.6

0.4

1 0.8 0.6 0.4 0.2

COS

Load reduction factor vs cos .

59
 60 Series
General Purpose Relays 10 A

COIL SPECIFICATIONS
VERSIONS:
AC - alternating current 50/60 Hz
DC - direct current
AM - current sensing
DI - DC coil with a diode in parallel

AC DC
RATED POWER 2.2 VA 1.3 W
OPERATING RANGE (0.8 to 1.1) UN (0.8 to 1.1) UN
HOLDING VOLTAGE 0.8 UN 0.5 UN
MUST DROP-OUT VOLTAGE 0.2 UN 0.1 UN
NOMINAL MAGNETOMOTIVE FORCE 180 A 250 A
THERMAL INSULATION CLASS OF WIRE F (+155C) F (+155C)
THERMAL RESISTANCE 43C/W 43C/W

CONDUCTED DISTURBANCE IMMUNITY BURST (acc. to EN 61000 - 4 - 4) level 4 (4 kV)

SURGE (acc. to EN 61000 - 4 - 5) level 4 (4 kV)

AC VERSION DATA DC VERSION DATA

R values relate to +20C. Tolerance of R and I values: 10%. R values relate to +20C. Tolerance of R and I values: 10%.
Rated Operating range Resistance Nominal coil Operating range
Rated Resistance Nominal coil
voltage absorption
voltage absorption
UN Umin U max R UN 50 Hz I
UN Umin U max R I
V V V mA
V V V mA
6 4.8 6.6 4.6 367
6 4.8 6.6 28 214
12 9.6 13.2 19 183
12 9.6 13.2 110 109
24 19.2 26.4 80 91.7
24 19.2 26.4 445 53.9
48 38.4 52.8 320 45.8
48 38.4 52.8 1,770 27.1
60 48 66 500 36.7
60 48 66 2,760 21.7
110 88 121 1,800 20
110 88 121 9,420 11.7
120 96 132 1,940 18.6
230 184 253 7,250 9.6
240 192 264 8,500 9.2

60
 60 Series
General Purpose Relays 10 A

COIL SPECIFICATIONS
Umin
R 60 S 60/1
1 70
UN
60

TEMPERATURE RISE t (C)

0.9
1.1 UN
50
0.8 UN
40

0.7 30
0.8 UN
20
0.6

10
0.5
0
- 40 -20 0 20 40 60 80 10 20 30 40 50 60

AMBIENT TEMPERATURE (C) HEATING TIME (min)

DC coil min pick-up voltage vs ambient temperature. Temperature rise "t " vs applied voltage. DC coils.
Umin = pick-up voltage
UN = rated voltage

S 60/2 S 60/3
70
70

60
60
TEMPERATURE RISE t (C)
TEMPERATURE RISE t (C)

50 1.1 UN 50

UN 1.1 UN
40
40

0.8 UN UN
30
30
0.8 UN
20 20

10 10

0 0
10 20 30 40 50 60 10 20 30 40 50 60
HEATING TIME (min) HEATING TIME (min)

Temperature rise "t " vs applied voltage. AC 50 Hz coils. Temperature rise "t " vs applied voltage. AC 60 Hz coils.

61