Question Bank
Uploaded by
ScribdTranslationsQuestion Bank
Uploaded by
ScribdTranslationsBANK OF TEXTILE MANUFACTURING QUESTIONS
1.- WHAT ARE THE TYPES OF MACHINES?
a. - Industrial Machines
b.-Straight sewing machines
c.-Industrial Machines, Semi-industrial (family)
d.- All of the above.
2.- THE OIL VIEWER OF THE MACHINE IS USED FOR:
a.- to see the internal oil flow
b.- wrap the wool
c.- the machine's scale
d.-the machine stitch
3.- THE SEWING MACHINE KNEE LEVER IS USED FOR.
a.- lift the foot, press it
b.-raise the screw
c. - raise the belt
d) to dock
4.- THE THREADING OF THE THREAD TO THE NEEDLE IN THE INDUSTRIAL STRAIGHT MACHINE IS:
a) right to left
b) halfway through
c) left to right
d) right at the end
5.- THE SWITCH IS USED FOR:
to stretch the thread
b) to turn the machine on and off
gather the fabric
d) mark the fabric
6. THE OVERLOCK MACHINE TAKES THREE STEPS:
a) sew, level the fabric
b) adjust the fabric
c) grab the cloth
d) cut, sew and overlock
7. THE REVERSE LEVER HAS THE FUNCTION OF:
a) to stitch the garment
b) make a stitch at the beginning and at the end of the seam
c) sew in the middle of the fabric
to gather the fabric
8.- WHAT KIND OF TACKING STITCHES DO YOU KNOW?
a.-Simple basting
B.-Reverted Stitch
Basting Stitch Short and Long
D.-Only b.
9.- WHERE THE LAYING OUT AND CUTTING OF GARMENTS IS CARRIED OUT ACCORDING TO
TECHNICAL RECOMMENDATIONS
a.- Cutting board
b.- About the machine
c.- On the ironer
d.- None of the above.
10.-MEASUREMENT FOR BASIC SKIRT.
neck contour.
b) armhole circumference, cuff circumference
contour of arm
waist circumference
11.- THE SEQUENCE FOR MAKING A SKIRT IS:
a.- Cutting, habilitation, machine sewing.
b.- Sew, iron, join sides and place waistband.
c.- Edge reworking
d.- Adjust the machine, sew darts, join pieces, and iron.
12. THE WAIST IS MEASURED FROM.
the shoulder to the hip
from the neck to the waist
from the chest to the hip
from the hip to the waist
13. WHAT IS THE PURPOSE OF BUST SEPARATION:
to locate the clamps
b) to cut the fabric
c) to calculate the dimension of the blouse
to outline the blouse
14. THE CORSET IS:
the garment that covers from the waist to the knee
sleepwear
c) the part of the dress that covers the body from the shoulders to the waist
the scarf for the cold
15.- THE SEQUENCING OF MAKING A BLOUSE IS:
a.- styling and cutting
b.- marked cutting, enabling and sewing by machine
c.- ironing and cutting
d.- none of the above.
16. SUITABLE FABRICS FOR DRESS ARE:
pima cotton jersey
b) yacar, seda, versach y lino
c) polycotton. flannel
d) poplin. Flannel
17.- SOME TYPES OF DRESSES ARE:
a) straight cut, empire
b) beveled cut
octagonal cut
three-dimensional cut
18.-THE FRENCH RULE IS USED IN:
waist and hip
collars and sleeves
sufficient and throw
d) shot trace
19.- WHAT INSTRUMENTS DO WE NEED TO CUT THE PIECES IN THE
Tissue?
a.- Scissors and electric cutter
B.-knife, picketers
c.- Zigzag scissors
d.- None of the above
20.- THE METHODOLOGY FOR MEASUREMENT TAKING IS ACCORDING TO.
a.- client.
b.- color and model of the fabric.
c.- type of garments.
d.- all of the above.
21.- TOOLS USED IN THE SEWING ARE:
a.- Sewing machine, overlock machine, and buttonhole machine.
b.- cutting table, ironing board and easel.
scissors, pin cushion, tape measure and needle.
d.- none of the above.
22.- WHAT IS THE USE OF THE SEWING CARD:
a.-Place the fabric properly to operate on the machine:
b.- Indicate all the data to use the type of stitching (PPP).
c.- Indicate all the data to be used in the machine.
d.- Indicate the regulation of préstate.
23.- THE MOST COMMON DEFECTS FOUND IN FINISHED GARMENTS ARE:
a.- picked seams, burst seams, skipped stitches, holes and stains.
b.- poor presentation, bad ironing and bad packaging.
c.- perfect finish and quality control
d.- the previous two.
24.- WHAT WORK TEAMS WILL BE USED IN THE MAKING OF A
Garment?
a.- Rule games
B.-Tools, brushes, tape measure
C.-Blades, symbols, measuring tape
D.-cinta Métrica, lápiz bicolor, papel Graf, Tiza Sastre.
25.- WHAT DEFECTS CAN WE FIND IN THE FABRIC.
a.- Veined, punctured, stains, contaminations, gaps, different shades
b.- Wrinkles, folds, spots different from the tone
c.- Different widths, dots, uniformity
d.- None of the above.
26.- THE METHODS OF TEXTILE MANUFACTURING ARE:
a.- Process of sewing, cutting, and ironing.
b.- Enabled for parts, equipment, machinery, and manufacturing process.
c.- Machine, fabric, thread, and ironing.
d.- Layout, cutting, machinery, and accessories.
27.- TO ACHIEVE A GOOD IRONING, THE FOLLOWING SHOULD BE CONSIDERED:
a good weight iron.
b.- temperature and pressure.
c.- water with soap.
d.- all of the above.
28.- DURING THE PRODUCTION PROCESS, IT IS VITAL TO CONSIDER SAFETY AND HYGIENE.
HOW:
a.- proper use of machines, tools, cleanliness, order, lighting.
b.-to know the work accidents.
c.- the two previous ones.
d.- clean the classroom
29.- HOW TO AVOID ACCIDENTS IN THE TEXTILE WORKSHOP?
a.- Use of protectors
b.- Bring in an accident specialist
C.- Use of thimbles, do not use damaged electrical materials, protectors, environment
Enlightened.
d.- Strictly complying with health and safety regulations.
30. WHAT IS THE STROKE?
a.-It is to outline graphically on paper using the rules according to the garment
a) It is to draw lines on a paper with measurement
b) It is to draw lines according to the garment model
c) None of the above
31. THE GARMENTS MADE OF WOVEN FABRIC ARE:
shirt, skirt, and dress pants
b) polo, casaca, buzo
c) shirt, sweater
d) jacket, pants
32.-THE STANDARD MEASUREMENT FOR THE FLY OF THE FLARED SKIRT IS:
4 meters
3 meters and 40 cm
3 meters
2 meters
33. THE WIDTH OF THE RUFFLE OF THE ABANQUINA SKIRT ACCORDING TO THE PATTERN IS:
3 centimeters wide
b) 4 centimeters wide
5 centimeters wide
8 centimeters wide
34. THE WAIST OF THE SKIRT IS TIGHTENED AT.
the machine
with an overlock machine
by hand
with a safety pin
35. THE STANDARD MEASURE OF THE ABANQUINO SUIT JACKET IS:
20 cm wide 40 cm long
60 cm long 20 cm wide
c) 45cm long 30cm wide
90 cm long and 50 cm wide
36. THE MEASURE OF A DRESS SKIRT IS:
2 fingers below the knee
4 fingers below the knee
5 fingers below the knee
3 fingers below the knee
37. SUITABLE FABRICS FOR JACKET MAKING ARE:
a) terciopelo, lino
b) cotton, flannel
c) brocade silk, embroidered organza
d) poly cotton, polyester
38.-THE JACKET HAS AS AN ORNAMENT:
a) satin ribbon, buttons and lace
b) bias, brackets
c) catch catch, closure
d) interfacing, fleece
39.-THE ENAGUA IS MADE OF FABRIC:
velour
plush
poplin
trench coat
40.- THE UNDERCULOT IS.
a) equal to the flared skirt
5cm less than the skirt
10 cm less than the skirt
3 cm less than the skirt
LAST NAMES AND
SHIFT
NAMES
No.
Question ALTERNATIVES
Score
A B C D
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.
TOTAL