Conchita Doll - “TOILET” version

Toilet paper servant

Design by Lili Pav Model 2023

 Copyrights: This pattern is reserved exclusively for personal use!

It may not be reproduced in whole or in part, published (online), copied

(online), modified, translated or resold.

You can sell the finished products, if they are made by you, in limited
quantities and by filling in the name of the creator "Lili Pav". Please add
the phrase "according to the pattern created by Lili Pav". I would be
delighted to see your achievements and thank you for choosing my
model!!!

Recommended Materials
- 2 cotton balls of the color of your choice for the skin (skin, cocoa, beige ...)
- Acrylic wool for the hair (not too big, brand and color of your choice)
-The hook of appropriate size – I use Hook 2mm;
- Eyes 10mm (safe eyes)
- Stuffing material
-Needle with a large eye for embroidery of the nose, shaping the eyes, tightening the face
-Some white yarn for embroidering the whites of the eyes
- Some brown yarn for embroidering eyebrows
-Wire 2.0mm wide for the skeleton the arms (the wire 50cm long) - 2 pieces
- Scissors
-Plastic for the foot - 2 pieces

Abbreviations
MR = magic ring
ch – chain
st – stitch
sc - single crochet
hdc – half-double crochet
sl st - slip stitch
inc - increase (2 sc in next st)
dec - decrease (2 sc worked off together)
FLO - front loop only
BLO - back loop only

2
01.2023 Design by Lili Pav
(...)*Х – repeat the set in brackets X times
+ Offset loop – shift stitch: make some additional stitches to align the marker thread.
( ) = number of stitches you should have at the end of your round

Note:
To make the decreases less visible on the crocheted
detail I recommend making them as shown in the
picture.
It is advisable to use the present method on the visible
parts of the doll such as face, visible parts of the body,
etc.
* Use a stitch marker to mark the beginning of each
round, and move the marker up each time you start a
new round. You can use a piece of yarn of contrast color to mark the beginning of each round.

Head
Beige color, hook 2 mm
Work in spiral. The marker is exactly in the back.
Fill the head with fiber tightly in the process, pay attention on filling the cheeks with fiber.
Rnd 1: 6 sc in MR (6)
Rnd 2: 6 inc (12)
Rnd 3: (1 sc, inc)*6 (18)
Rnd 4: (2 sc, inc)*6 (24)
Rnd 5: (3 sc, inc)*6 (30)
Rnd 6: 2 sc, (inc, 4 sc)*5, inc, 2 sc (36)
Rnd 7: (5 sc, inc)*6 (42)
Rnd 8: 3 sc, (inc, 6 sc)*5, inc, 3 sc (48)
Rnd 9: (7sc, inc)*6 (54)
Rnd 10: 4 sc, (inc, 8 sc)*5, inc, 4 sc (60)
Rnd 11: (9 sc, inc)*6 (66)
Rnd 12-18: (7 rows) 66 sc
Rnd 19: 22 sc, (dec, 3 sc)*4, dec, 22 sc (61)
Rnd 20-21: (2 rows) 61 sc
Rnd 22: 20 sc, 8 inc, 5 sc, 8 inc, 20 sc (77)
Rnd 23: 1 sc, (dec, 2 sc)*3, dec, 47 sc, (dec, 2 sc)*3, dec, 1 sc (69)
eyes: insert the safety eyes (or half-balls) between the 20th and the 21st row, spaced 10 m
apart.
Rnd 24-27: (4 rows) 69 sc
Rnd 28: 69 sc + 2 Offset loop
Rnd 29:16 sc, 8 dec, 5 sc, 8 dec, 16 sc (53)
Rnd 30: 53 sc

3
01.2023 Design by Lili Pav
Rnd 31: (8 sc, dec)*5, 3 sc (48)
Rnd 32: (4 sc, dec)*8 (40)
Rnd 33: (3 sc, dec)*8 (32)
Rnd 34: (2 sc, dec)*8 (24)
Rnd 35-42 (8 rows): 24 sc (24)

Tuck the last 7 rows inside the head (photo above).

Nose

We embroider the nose with stitches of beige yarn between 22 and 23 rounds. Spout width 4 sc.
Make 3-4 stitches horizontally
Ears x 2
Beige color
1) 5 sc in MR, don't round the work, 1 ch, turn
2) 5 inc (10), 1 ch, turn
3) 10 sc. Leave a tail thread to attach to the head.
Sew along 17-23 head rows, counting about 19 sc aside from the nose edge.

FACE TIGHTENING
We mark two points with needles, at a distance of 1 sc, between the last row of the neck and the
first row of the head, exactly in the middle of the face. The head can be tilted back for comfort. We
introduce the needle at 1 point, output at 2. Input at 3 point, output at 4. Input at 1 point, output at 5.

4
01.2023 Design by Lili Pav
Input at 6 point, output at 4. The thread runs over the eyes. Pull the ends of the thread and tie
them, slightly pulling the eyes. Hide the ends of the thread in the head together with the knot.

3 6
5

1
4 4

FACE DECORATION
*To give the doll a lively look, we embroider squirrels and cilia
*We mark with needles the place where the eyebrows will be and embroider them. We hide all the
strings in the head.
* Slightly tint the cheeks and the nose with pastel crayon or pencil.

Arms x 2
Rnd 1: chain 5, start working in the 2nd chain from hook 1inc, 2sc, 4sc in the last chain foundation,
continue crocheting on the other side of the chain foundation 2sc, inc (12)
Rnd 2: inc, 4sc, 2inc, 4sc, inc (16)
Rnd 3: inc, 6sc, 2inc, 6sc, inc (20)
Rnd 4: 9sc, inc, 9sc, inc (22)

5
01.2023 Design by Lili Pav
Rnd 5: 22sc
Rnd 6: 10sc, 2dec, 8sc (20)
Rnd 7: 10sc, (3sc in one stitch) х 2 times, 8 sc (24)
Rnd 8-9 (2 rows): 24sc
Rnd 10: 1sc, 1dec, 8sc, (sc3tog) х 2 times, 4sc, 1dec, 1sc (18)
Rnd 11: 8sc, 2dec, 6sc (16)
Rnd 12: 1sc, 1dec, 10sc, 1dec, 1sc (14)
Rnd 13: 14sc Stuff the palm gently to make it flat, and pay attention to the thumb.
Rnd 14: Crochet through FLO. (1inc, 2sc, 1inc, 3sc) х 2 times (18)
Rnd 15: 18sc
Rnd 16: 12sc, 1inc, 5sc (19)
Rnd 17-19 (3 rows): 19 sc
Rnd 20: 13sc, 1inc, 5sc (20)
Rnd 21-24 (4 rows): 20sc
Rnd 25: 15sc, 1dec, 3sc (19)
Rnd 26: 19sc Crochet the elbow. Decreases are on the opposite side of the thumb (photo). Make a
shift stitch if needed
Rnd 27: 3sc, 4inc, 2sc, 5dec (18)
Rnd 28: 3sc through FLO, 8sc through both loops, 7sc through FLO. (18) Stuff the arm.
Rnd 29: 4sc, 1dec, 2sc, 1dec, 4sc, 1inc, 1sc, 1inc, 1sc (18)
Rnd 30: 18sc
Rnd 31: 14sc, 1inc, 3sc (19)
Rnd 32-34 (3 rows): 19sc
Rnd 35: 17sc, 1inc, 1sc (20)
Rnd 36-37 (2 rows): 20sc
Rnd 38: 18sc, 1inc, 1sc (21)
Rnd 39 - 40 (2 rows): 21sc
Rnd 41: 19 sc, 1inc, 1sc (22)
Rnd 42-44 (3 rows): 22sc
Rnd 45: 1dec, 9sc, 1dec, 9sc (20)
Fasten off and cut the thread. Hide the tail.
Prepare the skeleton. Take the wire 50cm long, fold in half and twist as shown in the photo. Put the
wire into the arm and fill in with stuffing material.
Legs two pieces
The marker is exactly along the center of the back.
Rnd 1: chain 7, start working in the 2nd chain from hook 1inc, 4sc, 5sc in the last
chain foundation, continue crocheting on the other side of the chain foundation
4sc, inc (17)
Rnd 2: inc, 5 sc, 5 inc, 5 sc, inc (24)
Rnd 3: 1 sc, inc, 5 sc, (inc, 1 sc)*5, 5 sc, inc, 1 sc (31)
Rnd 4: 2 sc, inc, 5 sc, (inc, 2 sc)*5, 5 sc, inc, 2 sc (38)
Rnd 5: (1 sc, inc)*2, 5 sc, (inc, 3 sc)*5, 5 sc, (inc, 1 sc)*2 (47)
Cut an insole from plastic. The insole must be a bit less than the crocheted foot.

6
01.2023 Design by Lili Pav
The marker is exactly along the center of the back, (if it's necessary, work 2-3 sc to shift the marker
in a right place) + 2 offset loop
Rnd 6: BLO: 47 sc.
Rnd 7-10: (4 rows) 47 sc
Rnd 11: 11 sc, 6 dec, 1 sc (the center of the front), 6 dec, 11 sc (35)
Rnd 12: 1 sc, dec, 29 sc, dec, 1 sc (33)
Rnd 13: 6 sc, (dec, 1 sc)*7, 6 sc (26)
Rnd 14: 8 sc, 5 dec, 8 sc (21)
Rnd 15: 21 sc
Rnd 16: 19 sc, 1inc, 1 sc (22)
Rnd 17: 6 sc, 1inc, 11 sc, 1inc, 3 sc (24)
Rnd 18-19 (2 rows): 24sc
Rnd 20: 7 sc, 1inc, 12 sc, 1inc, 3 sc (26)
Rnd 21-22(2 rows): 26sc
Rnd 23: 8 sc, 1inc, 13 sc, 1inc, 3 sc (28)
Rnd 24-26 (3 rows): 28sc
Rnd 27: 4 sc, 1dec, 20 sc, 1dec (26)
Rnd 28: 26sc
Rnd 29: 2 sc, 1dec, 22 sc (25)
Rnd 30: Crochet 23 sc (incomplete row), put a marker to mark the beginning of the round.
Crochet the knee: The decrease is at the level of the heel and the increase is at the level of the toe
(photo)

Rnd 31: 5dec, 5sc, 5inc, 5sc (25)

Rnd 32: FLO: 10sc, 10sc as usual, 5sc through FLO. (25)
Rnd 33: 1inc, 3sc, 1inc, 5sc, 1dec, 6sc, 1dec, 5sc (25)
Stuff the leg.
Rnd 34: 1inc, 5sc, 1inc, 5sc, 1dec, 4sc, 1dec, 5sc (25)
Rnd 35: 2sc, 1inc, 3sc, 1inc, 18sc (27)
Rnd 36: 27sc
Rnd 37: 7sc, 1inc, 19sc (28)
Rnd 38-51 (14 rows): 28sc
Rnd 52: (3sc, 1dec, 2sc, 1dec, 3sc, 1dec) х 2 times (22) + 2 offset loop
Rnd 53: Stuff the leg then fold it in half and crochet 11 sc through the two thicknesses. Stop, cut the
thread and hide it

7
01.2023 Design by Lili Pav
Body
Start with yarn into complementary color. The ass consists of two parts.
Rnd 1: 6 sc in MR (6)
Rnd 2: 6 inc (12)
Rnd 3: (1 sc, inc)*6 (18)
Rnd 4: (2 sc, inc)*6 (24)
Rnd 5: (3 sc, inc)*6 (30)
Rnd 6: 2 sc, (inc, 4 sc)*5, inc, 2 sc (36)
Rnd 7: (5 sc, inc)*6 (42)
Rnd 8: 3 sc, (inc, 6 sc)*5, inc, 3 sc (48)
Rnd 9: 48 sc Cut and fasten the thread on one half, do not cut it off on the second half, we will
continue crocheting further
Fold the parts face to each other, the part with the cut thread to yourself, tie together 6 sc

The arrows in the photo show the direction of crocheting after the connection.
Rnd 10: 28sc on the hemisphere, 11sc in pairs with the left leg, 3 sc on the first hemisphere
+ 3 sc on the second hemisphere, 11sc in pairs with the right leg, 28sc = (84), put a marker.
The marker will pass through the center of the backrest.
Align it as needed
Rnd 11: 1dec, 80 sc, dec (82)
Rnd 12: 1dec, 78 sc, dec (80)
Rnd 13: 1dec, 76 sc, dec (78)
Rnd 14: 1 sc, dec, 72 sc, dec, 1 sc (76)
Rnd 15: 1 sc, dec, 70 sc, dec, 1 sc (74)
Rnd 16: 2 sc, dec, 66 sc, dec, 2 sc (72) + 1 Offset loop
Rnd 17: 2 sc, dec, 64 sc, dec, 2 sc (70)
Rnd 18: 3 sc, dec, 60 sc, dec, 3 sc (68)
Rnd 19: 68 sc
Rnd 20: 10 sc, dec, 44 sc, dec, 10 sc (66)
Rnd 21: 66 sc
Rnd 22: 7 sc, dec, 48 sc, dec, 7 sc (64)
Rnd 23: 64 sc
Rnd 24: 4 sc, dec, 52 sc, dec, 4 sc (62)
Rnd 25: 62 sc
Rnd 26: 2 sc, dec, 54 sc, dec, 2 sc (60)

8
01.2023 Design by Lili Pav
Rnd 27-34: (8 rows) 60 sc
Rnd 35: 60 sc + 2 Offset loop
Rnd 36: 4 sc, (dec, 8 sc)*5, dec, 4 sc (54)
Rnd 37: 54 sc
Join the main color thread.
Rnd 38: 54 sc
Firmly pad the lower body (buttocks). You can weigh the doll with rice grains deposited in a knotted
stocking. Fill in the rest of the body to emphasize the back and give it a harmonious shape.
The marker must be imperatively in the middle of the back because we will now join the arms!!!!!
For the assembly of the arms, use the illustrations below.
Same principle as for the legs, take the 2 thicknesses together (lower part of the arm and body then
upper part of the arm alone) -photos 3 and 4

Rnd 39: Inner part: 10 sc along the back, 7 sc along the body together with left arm, 20 sc along the
front, 7 sc along the body together with right arm, 10 sc along the back (54)
Bend the wire coming out of the hands, secure it with a plaster.
Rnd 40: Outer part: 10 sc along the back, 13 sc (outer part of arm), 20 sc along the front, 13 sc
(outer part of arm), 10sc along the back (66)
Rnd 41-42 (2 rows): 66 sc
Rnd 43: 10 sc, 7 dec, 18 sc, 7 dec, 10 sc (52)
Rnd 44: 8 sc, 5 dec, 16 sc, 5 dec, 8 sc (42)
Rnd 45: 8 sc, 3 dec, 14 sc, 3 dec, 8 sc (36)
Rnd 46: 2 sc, (dec, 4 sc)*5, dec, 2 sc (30)
Rnd 47: (3 sc, dec)*6 (24)
Rnd 48-51: (4 rows) 24 sc
Rnd 52: (2 sc, dec)*6 (18)
Rnd 53-62: (10 rows) 18 sc
Fill the body by insisting on the neck because it will have to support the weight of the head and the
hair!
Rnd 63: (1 sc, dec)*6 (12)
Rnd 64: 6 dec (6)

9
01.2023 Design by Lili Pav
 Swivel head

Using a long needle, introduce a thread from the top of the head (photo 1) and pass it inside it
(photo 2). Cross the neck on both sides (insert on one side, remove it on the other)-photo 3. Tuck
the needle inside and return to the top of the head (photo 4). Repeat the operation with a new
thread (photo 5), cross the neck on the other side (photo 6) then pull the needle through the head.
Take it out in the center of the head (photo 7), a few points from the second end of the thread.

Tighten all the threads, thereby attaching the head to the neck. Turn your head left and right
several times to position it at the neck. Tie the threads tightly at the top of the head and tuck
everything inside. The head does not need to be sewn, it can rotate.

Hair

With the color of your choice. I recommend that you take a thread that is not too thick to avoid
getting too impressive a head of hair…

Rnd 1: MR, 6sc into MR. (6)

Rnd 2: BLO 6 inch. (12)

Rnd 3: (sc, inc) x 6. (18)

Rnd 4: BLO (2sc, inc) x 6. (24)

Rnd 5: (3 sc, inc) x 6. (30)

Rnd 6: BLO(4 sc, inc) x 6. (36)

10
01.2023 Design by Lili Pav
Rnd 7: (5sc, inc) x 6. (42)

Rnd 8: BLO (6 sc, inc) x 6. (48)

Rnd 9-10: (2 rows) 48 sc

- Without taking off the yarn, we continue: We dial a chain of air loops: 35 ch, in the opposite
direction, from the 2nd loop from the hook, we knit 34 hdc, ss along the chain into the next loop.

- We dial a chain of 35 ch, from the 2nd loop from the hook we knit 34 hdc, ss we do through 1
loop.

Thus, we alternate joining the curls to the circle: in the next column through the column.

In this way, we knit 10 long curls.

-We make a bang: for her we dial 10 ch, from the 2nd loop from the hook we make 9 hdc, ss in the
next loop. We alternate the joining of curls, (as well as long ones) into the next columns through
one.

-We make 8 short curls for bangs.

Next, we crochet long curls until the end of the circle.

11
01.2023 Design by Lili Pav
We have finished tying the circle, we rise higher (in 8 rnd) making 2 ch, ss. The principle is the
same: 35 ch, from the 2nd loop 34 hdc, ss.

-We no longer do bangs, all curls are 35 loops

We made a second circle of curls, we rise higher on 6th row, making 2 ch, cc, we knit the next
circle of curls of the same length.

In the same way we reach, closing the crown.

Our wig is ready.

*But before you sew it on, I RECOMMEND washing it. First with the addition of shampoo, and then
add a hair balm (the cheapest, which is not a pity). Squeeze it out in a towel, smooth it out and let it
dry. The curls will become softer and will lie beautifully.

It remains to sew on the wig. To do this, we try it on the head, fix it with needles and sew it first in a
circle, where we had a cap.

12
01.2023 Design by Lili Pav
After that, we fix the bottom row of curls with needles and sew them on.

We do not sew the upper curls.

Now it remains only to dress her up ...)))

Abbreviations
ch - chain
st - stitch
sc - single crochet
sl st - slip stitch
inc - increase
dec – decrease
hdc - half double crochet
dc - double crochet
DC inc – double crochet increase (work 2 DC in one
space)
DC dec – double crochet decrease (work 2 DC
together)
tr - triple crochet

The dressing gown (1 main color ball and half a secondary color ball)

Work in rows (round trip). Start with the main color, hook 2.5 mm

4 ch = 1tr 3 ch = 1 dc
Rnd 1: 35 ch. Turn the work,
from the 2nd ch: 1 sc, 1 hdc, 8
dc, 24 tr, 4 ch, turn
Rnd 2: 24 tr, 9 dc, 1 DC inc, 3
ch, turn

Rnd 3: into the second stitch from the hook: 1 sc, 1 hdc, 11 dc, 24 tr , 4 ch, turn
Rnd 4: 24 tr, 12 dc, 1 DC inc, 12 ch, turn

13
01.2023 Design by Lili Pav
Rnd 5: into the fourth stitch from the hook: 24 dc, 24 tr, 4 ch, turn
Rnd 6: 24 tr, 24 dc, 3 ch, turn
Rnd 7: 24 dc, 24 tr, 4 ch, turn
Rnd 8: 24 tr, 12 dc, 3 ch, turn
Rnd 9: 12 dc, 24 tr, 4 ch, turn
Rnd 10: 24 tr, 12 dc, 14 ch, turn
Rnd 11: into the fourth stitch from the hook: 24 dc, 24 tr, 4 ch, turn
Rnd 12: 24 tr, 24 dc, 3 ch, turn
Rnd 13: 24 dc, 24 tr, 4 ch, turn
Rnd 14: 24 tr, 24 dc, 3 ch, turn
Rnd 15: 24 dc, 24 tr, 4 ch, turn
Rnd 16: 24 tr, 24 dc, 3 ch, turn
Rnd 17: 24 dc, 24 tr, 4 ch, turn
Rnd 18: 24 tr, 24 dc, 3 ch, turn
Rnd 19: 24 dc, 24 tr, 4 ch, turn
Rnd 20: 24 tr, 24 dc, 3 ch, turn
Rnd 21: 24 dc, 24 tr, 4 ch, turn
Rnd 22: 24 tr, 12 dc, 3 ch, turn
Rnd 23: 12 dc, 24 tr, 4 ch, turn
Rnd 24: 24 tr, 12 dc, 14 ch, turn
Rnd 25: into the fourth stitch from the hook: 24 dc, 24 tr, 4 ch, turn
Rnd 26: 24 tr, 24 dc, 3 ch, turn
Rnd 27: 24 dc, 24 tr, 4 ch, turn
Rnd 28: 24 tr, 12 dc, 1 DC dec, turn
Rnd 29: 1 sc, 1 hdc, 11 dc, 24 tr , 4 ch, turn
Rnd 30: 24 tr, 9 dc, 1 DC dec, turn
Rnd 31: 1 sc, 1 hdc, 8 dc, 24 tr, leave on hold. Put the work on the wrong side and sew the
shoulders. Then put it back on the place of work. We will crochet the border of the dressing gown
and the collar.

Change yarn into complementary color

Rnd 1: 4 ch, 24tr, 26dc, 10 dc - on the back, 26 dc, 24 tr, 4 ch, turn (110)
Rnd 2: 110 tr, 1 ch, turn
Rnd 3: 110 sc, Stop, cut the thread and tuck it in.

Sleeves
14
01.2023 Design by Lili Pav
Join the main color thread to the beginning the armhole.
Rnd 1: 5 sc, 1 hdc in the space between the armhole and the sleeve, 23 dc along the sleeve, 1 hdc
in the space between the sleeve and the armhole, 1 sl st (30)
Rnd 2: 3 ch (replace the 1 dc), 29 dc, 1 sl st
Change yarn into complementary color/ Tie 2 rows: 3 ch, 29 dc, 1 sl st (30)
Belt
Working in swivel rows. Start with complementary color yarn, hook 2.5 mm
Rnd 1: 102 ch. Turn the work, from the 3nd ch: 100 dc, 1 ch, turn
Rnd 2: on the other side of the chain, make 100 sc, 1 sl st in the starting m to close. Stop, cut the
thread and hide it.
Headband:
Working in swivel rows. Start with complementary color yarn, hook 2.5 mm
Rnd 1: 172 ch. Turn the work, from the 3nd ch: 170 dc, turn
Rnd 2- 4 (3 rounds): 170 sc, sl st
Home Shoes

Start with main color thread (4):

Rnd 1:7 ch, start from the second stitch from the hook: 5 sc, 4 sc in the last stitch, 4 sc, 1
inc (15)
Rnd 2: 1 inc, 4 sc, 4 inc, 4 sc, 2 inc (22)
Rnd 3: 1 inc, 5 sc, (1 inc, 1 sc)*3, 1 inc, 5 sc, (1 inc, 1 sc)*2 (29)
Rnd 4: 1 sc, 1 inc, 6 sc, (1 inc, 2 sc)*3, 1 inc, 6 sc, 1 inc, 2 sc, 1 inc, 1 sc (36)
Rnd 5: 3 sc, 1 inc, 7 sc, (1 inc, 3 sc)*3, 1 inc, 7 sc, 1 inc, 3 sc, 1 inc (43)
At this stage cut the sole out of the cardboard.
Rnd 6: 2 sc, 1 inc, 8 sc, (1 inc, 4 sc)*3, 1 inc, 8 sc, 1 inc, 4 sc, 1 inc, 2 sc (50)

Make 4 pieces. For each foot, we have an insole and an outsole.

15
01.2023 Design by Lili Pav
Now we will assemble them and insert the cardboard sole inside.
When you have finished your 2 insoles inside and outside, take 1 insole of each and place
them on top of each other, upside down. We will assemble them. Do not forget to put the
cardboard one in the middle.
With a contrasting color (optional). Start in the middle of the heel (insole towards
you).Make 1 sc in each stitch of row 6. I advise you not to tighten the stitches too tightly
because they will be used to work the upper part of the slipper. Cut the thread and hide it.
Repeat the operation for the other pair of insoles. It must give this:

From the middle of the heel, we count 8 loops.

Rnd 1: We connect the yarn and knit with a tambour seam loops, ch, turn. From the
resulting loops, we continue to knit
Rnd 2-6 (5 rounds): 34 sc, ch, turn (34)
Rnd 7: 17 dec-hdc, ch, turn (17)
Rnd 8: 7 sc, 1 dec- sc, 8 sc, ch, turn (16)
Rnd 9: 8 dec-hdc, ch, turn (8)
Rnd 10: (dec- sc)*4, ch, turn (4)
Rnd 11: (dec- sc)*2 (2). Cut the thread and hide it.

16
01.2023 Design by Lili Pav
Make two rows of finishing in sc on the upper part of the shoe. Make the second slipper in
the same way. You can decorate with a pompom or other according to your taste.

Congratulations!!!! Your Conchita, toilet paper servant is

finished....

I hope you enjoyed making it.

A "Bathroom" version will be available soon.... See you soon!!!

17
01.2023 Design by Lili Pav