UP STANDARD DETAIL REFERENCE DRAWINGS

N DETAIL OF HEAVY WELDING BOSSES FOR THREADED CONNECTIONS

CONSTRUCTION-NOTES AND DETAILS FOR ISOMETRIC PIPING
AE-036175
AD-036627
AWAY AWAY
INSULATION DETAILS FOR HOT PIPING AA-036911
INSTALLATION OF JACK SCREWS FOR FLANGED JOINTS AC-036630

PT NPD
TOWARD TOWARD
NO DESCRIPTION (IN) CMDTY CODE QTY

DOWN
SHOP MATERIALS
S7 PIPE NOTES
F4 48"NPD
SEE ISO SWH6-A2-48-1000-100-C1 1 PIPE; W.T. = 11.13 MM; BE x BE; 48 PABYAP-SA 33.6 M 1. MATERIAL SHOWN WITH A BROKEN LINE AND SPOOLS LISTED IN THE SAUDI ARAMCO
FABRICATION LIST ARE NOT TO BE FURNISHED BY THE VENDOR.
R00R2-G57-P-2748 S8 THIS SUPPORT TO BE WELDED BEFORE LINING EFW; ASME B36.10; API 5L Gr. B PSL 2. PIPING DETAILS SHALL BE CUT AT ALL POINTS MARKED F.W. (FIELD WELD).
RD-40114 G2-A2-48-2 2 3. EACH FABRICATED SECTION SHALL BE CLEARLY MARKED WITH ITS CODE NUMBER.
S9
X 9073040 FITTINGS 4. UNLESS OTHERWISE NOTED. (A) ALL DIMENSIONS ARE TO C OR FACE OF FLANGES.

Y 9741227 G57-SPS-208 (B) BOLT HOLES ON FLANGES STRADDLE C . (C) WELDING ELBOWS ARE LONG RADIUS.

10 2 WELDOLET; SCH. 80; BE x BE; MSS 48X2 WNAGAP-SA 1

EL +119310 07 THIS SUPPORT TO BE WELDED BEFORE LINING 5. FABRICATION SHALL BE IN ACCORDANCE WITH SAUDI ARAMCO SPECIFICATION 01-SAMSS-10.

SP-97; ASTM A105N 6. GASKET ALLOWANCE 3 MM COMPRESSED

S8 3 ELBOW 90; SCH. STD; BE x BE; ASME 48 WLAYAP-SA 2 7. PIPING MATERIAL IS

S10 14 G2-A2-48-2 B16.9; ASTM A234 WPB PIPE SIZE SCHEDULE SPECIFICATION

00 Y 9720191 REF TO MTO

LM3-P3-48-0-C1 0 20 FLANGES REF TO MTO REF TO MTO

S15 4 WELDNECK FLANGE; CL 150; SCH. STD; 48 HOCYSP-SA 6

S6 21 RF x BE; ASME B16.47-A; ASTM A350
03 BR-P1-48-C1
PH1-S4-48-11.13-1100-C1 6 2 LF2 Cl.2
50 THIS SUPPORT TO BE WELDED BEFORE LINING
THIS SUPPORT TO BE WELDED BEFORE LINING 00 729 5 WELDNECK FLANGE; CL 150; SCH. 80; 2 HACGXP-SA 1 8. WELDING STRESS RELIEF - YES NO
X
S13 F4 RF x BE; ASME B16.5; ASTM A105N 100% X-RAY SPOT X-RAY 01-SAMSS-10

SWH6-A2-48-700-100-C1 1 PIPE SUPPORTS 9. TESTING SHOP HYDROSTATIC TEST - YES NO

F4 G21 B23 THE SHOP HYDROSTATIC TEST SHALL BE CARRIED OUT ON PIECES HAVING ALL ENDS

THIS SUPPORT TO BE WELDED BEFORE LINING 6 PIPE SUPPORT: 48 SUP 2 FLANGED. HYDROSTATIC TEST PRESSURE

3 PH1-S4-48-11.13-1100-C1 10. ALL PIPING MATERIAL IS IN ACCORDANCE WITH SAUDI ARAMCO ENGINEERING SPECIFICATION
S11 S14 7 PIPE SUPPORT: 48 SUP 2 1LE0P03 .
13 SAES-L-105 CLASS ALL EXCEPTIONS ARE NOTED ON THE ISOMETRIC.

SCH1-A3-48-700-100-C1 G2-A2-48-3 F5 G22 B24 81

S18 SWH6-A2-48-1000-100-C1 11. INSULATION REQUIRED - YES NO
X
INSULATION SHOWN ON DRAWING
8 PIPE SUPPORT: G2-A2-48-2 48 SUP 2
S12 PV1-F-48-11.13-1400-0-C1

2606
THIS SUPPORT TO BE WELDED BEFORE LINING 9 PIPE SUPPORT: G57-SPS-208 48 SUP 2
PH1-S4-48-11.13-800-C1 2021 10 PIPE SUPPORT: LM3-P3-48-0-C1 48 SUP 2
THIS SUPPORT TO BE WELDED BEFORE LINING
S16 11 PIPE SUPPORT: SCH1-A3-48-700-100-C1 48 SUP 1

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL, OR IN PART, SHALL BE OBTAINED FROM THIS DRAWING WITHOUT THE WRITTEN CONSENT OF SAUDI ARAMCO.
S17 TH2-VP-48-30-STD-1600-90-C1 12 PIPE SUPPORT: 48 SUP 1
X 9073040
SWH1-A3-30-600-223-C1

3576
Y 9720191 THIS SUPPORT TO BE WELDED BEFORE LINING PH1-S4-48-11.13-800-C1
THIS SUPPORT TO BE WELDED BEFORE LINING EL +120041 13 PIPE SUPPORT: SWH6-A2-48-700-100-C1 48 SUP 1
SPOOLS TO BE FABRICATED BY VENDOR
14 PIPE SUPPORT: G2-A2-48-3 48 SUP 1
S9

1
NO. WEIGHT NO. WEIGHT
MARK NO. SIZE MARK NO. SIZE
15 PIPE SUPPORT: BR-P1-48-C1 48 SUP 1 PIECES LBS PIECES LBS

G57-SPS-208 F4 G21 B23

F4 16 PIPE SUPPORT: 48 SUP 1
THIS SUPPORT TO BE WELDED BEFORE LINING TH2-VP-48-30-STD-1600-90-C1
S10 17 PIPE SUPPORT: SWH1-A3-30-600-223-C1 48 SUP 1
LM3-P3-48-0-C1 18 PIPE SUPPORT: 48 SUP 1
2021 3
EL +113710 PV1-F-48-11.13-1400-0-C1
19 PIPE SUPPORT: G2-A2-48-5 48 SUP 1
40
57 FIELD MATERIALS
F4 G21 B23 FLANGES
S6
6 20 BLIND FLANGE; CL 150; RF; ASME 2 IACZXP-SA 1
96 PH1-S4-48-11.13-1100-C1
1 11 B16.5; ASTM A105N
PD THIS SUPPORT TO BE WELDED BEFORE LINING
8"N GASKETS SPOOLS TO BE FABRICATED BY SAUDI ARAMCO
4
21 GASKET; CL 150; RF x RF; ASME 48 XABFFZ-SA 3 NO.
MARK NO. SIZE
NO.
MARK NO. SIZE
PIECES PIECES
16.20; 4.5 MM; SPIRAL WOUND; Inc.
S19 625WINDINGS; FLEXIBLE GRAPHITE
SEE ISO FILLED; WITH CS OUTER RING
G2-A2-48-5
U02R2-G57-P-2748 SHT 003 S7
X 9061071
SWH6-A2-48-1000-100-C1
Y 9716786
THIS SUPPORT TO BE WELDED BEFORE LINING
EL +113710

REFERENCE DRAWINGS

DWG. CONTROL FOR J.O. 10-00631-0002 CD-969985

P&ID NO. CA-083073.002

LDT CD-083200.015

PIPING MATERIAL SPECIFICATION CE-082018

STANDARD PIPE SUPPORT CE-082064

TYPICAL PIPING ASSEMBLIES CD-082134

UNDERGROUND PIPING STANDARD DETAILS CD-082079

NOTES CONT.:
12. ALL DIMENSIONS AND CO-ORDINATES ARE IN MM.
13. FOR SMALL BORE LINES (UPTO 1-1/2" ) DIMENSIONS AND ROUTING SHALL BE FIELD ADJUSTED, BUTT FIELD
FOR SUPPORTING REFER TO PIPING PROCEDURE DOC.NO.05040-200-000-PPR-001. WELD WELD
14. ALL TIE INS POINTS SHALL BE VERIFIED BY CONSTRUCTION CONTRACTOR PRIOR FABRICATION AND
INSTALLATION.
15. FOR BOLT LENGTHS REFER ITEM DESCRIPTION.
16. SEAL WELDING REQUIREMENT OF THREADED JOINTS SHALL BE AS PER CL. NO. 9 OF SAES-L-110
17. FOR UG PIPING INSTALLATION DETAILS REFER TO DOC.NO.CD-082079. SOCKET SCREWED
REVISION VALIDATION
18. PRESSURE TESTING SHALL BE IN ACCORDANCE WITH SAES-A-004 IN ADDITION TO SAES-L-150 FOR WELD JOINT
METALLIC PIPING SYSTEMS AND SAES-S-070 FOR NON-METALLIC ONES. THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
19. NDT REQUIREMENT SHALL BE AS PER SAES-W-011, AS APPLICABLE. REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:
RADIOGRAPHIC TESTING SHALL BE PERFORMED AS PER SAEP-1143.
20. ALL PROCESS CONTAINING WELDS OTHER THAN BUTTWELDED SHALL BE 100% MP & LP FOR FERRO 10-00631-0002
MAGNETIC & NON FERROR MAGNETIC MATERIAL RESPECTIVELY. INSULATED TRACED DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
21. PWHT SHALL BE AS PER B31.3 / B31.3-2012 & SAES-W-011, AS APPLICABLE. (DESIGN AGENCY) REQUIRED (SAUDI ARAMCO)
22. CONSTRUCTION OF PLANT PIPING SHALL BE IN ACCORDANCE WITH SAES-L-350. PIPE PIPE
ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE
23. PAINTING AND COATING WORKS SHALL BE AS PER PAINTING/COATING SCHEDULE (CA-969919). AHH MOH
24. INSULATION OF PIPING SHALL BE AS PER PROJECT INSULATION SPECIFICATION (CE-082019). 07/17/2023 07/17/2023
25. INSTRUMENT'S SYMBOL IN ISOMETRIC DRAWING MAY NOT MATCH WITH P&ID. REV.NO. DATE REVISION DESCRIPTION
26. FOR PIPE SUPPORT DETAILS REFER PIPE SUPPORT STD. NO. CE-082064, UNLESS OTHERWISE IDENTIFIED. PIPE SUPPORT
27. FOR BRANCH SIZE OF 1-1/2" AND BELOW, THE STIFFENING SHALL BE PROVIDED AS PER PIPE 00 07/17/2023 ISSUED FOR CONSTRUCTION
SUPPORT STD. NO. CE-082064. JOB ORDER/EWO NO.
28. FOR FIRE HYDRANTS AND MONITORS SUPPORTING REFFER TO CD-082079. THIS REVISION IS NOT TO BE USED FOR
29. FOR PERSONNEL PROTECTION INSULATED LINES, PAINTING SYSTEM IS SELECTED BASED 10-00631-0002 CONSTRUCTION UNTIL CERTIFIED AND DATED
ON USING INSULATION MATERIAL. IN CASE GUARD MESH IS UTILIZED, RELEVANT PAINTING
SYSTEM SHALL BE SELECTED FROM COATING MAP, DOCUMENT NUMBER: CA-969919-002
30. FOR DIESEL OIL (DO) LINES WITH PIPING MATERIAL CLASS (1CS1P), AND IN CASE OF SAUDI ARABIAN OIL COMPANY
PAINTING SYSTEM OF VALVES (AS SUPPLIED BY VENDOR) DIFFERS FROM PAINTING DRAWING TYPE

SYSTEM AS IDENTIFIED ON ISOMETRIC, VALVE PAINTING SHALL BE REMOVED AT SITE AND 48"-P-2748-1LE0P03 ISO
SELECTED PAINTING SYSTEM FOR LINE ON ISOMETRIC SHALL BE APPLIED ON VALVE
PROCESS
INT. CHEMICAL PIPING DESIGN OPERATING TEST PRESS. TEST RADIOGRAPHY % MT/LP INSULATION TRACING PAINTING STRESS LINE ID
FBE CLEANING MATERIAL TEMP. PRESS. TEMP. PRESS. (PSIG) MEDIUM SHOP FIELD THK. TYPE SYS NO. WET CRUDE HANDLING FACILITIES
LINED CLASS (DEG. F) (PSIG) (DEG. F) (MM.)
STRESS ANALYSES (PSIG) SAFANIYAH SAUDI ARABIA
BY CHECKED PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

YES 1LE0P03 200 250 108 180 427.5 Water 10 10 100 NOTE APCS-1D SYS-253 U02R2-G57-P-2748
24 NO. OF SHT: 011 G57 L RD-20039 001 00

Saudi Aramco 2825 ENG. (09/03)

RESTRICTED SMART CADD-03