UP STANDARD DETAIL REFERENCE DRAWINGS

N DETAIL OF HEAVY WELDING BOSSES FOR THREADED CONNECTIONS

CONSTRUCTION-NOTES AND DETAILS FOR ISOMETRIC PIPING
AE-036175
AD-036627
AWAY AWAY
INSULATION DETAILS FOR HOT PIPING AA-036911
INSTALLATION OF JACK SCREWS FOR FLANGED JOINTS AC-036630

PT NPD
TOWARD TOWARD
NO DESCRIPTION (IN) CMDTY CODE QTY

DOWN
SHOP MATERIALS
PIPE NOTES
SEE 1 PIPE; W.T. = 11.13 MM; BE x BE; 48 PABYAP-SA 5.2 M 1. MATERIAL SHOWN WITH A BROKEN LINE AND SPOOLS LISTED IN THE SAUDI ARAMCO
FABRICATION LIST ARE NOT TO BE FURNISHED BY THE VENDOR.
U02R2-G57-P-2748 SHT 003 EFW; ASME B36.10; API 5L Gr. B PSL 2. PIPING DETAILS SHALL BE CUT AT ALL POINTS MARKED F.W. (FIELD WELD).
X 9084400 2 3. EACH FABRICATED SECTION SHALL BE CLEARLY MARKED WITH ITS CODE NUMBER.

Y 9716786 FITTINGS 4. UNLESS OTHERWISE NOTED. (A) ALL DIMENSIONS ARE TO C OR FACE OF FLANGES.
(B) BOLT HOLES ON FLANGES STRADDLE C . (C) WELDING ELBOWS ARE LONG RADIUS.
EL +107289 2 WELDOLET; SCH. 80; BE x BE; MSS 48X2 WNAGAP-SA 5 5. FABRICATION SHALL BE IN ACCORDANCE WITH SAUDI ARAMCO SPECIFICATION 01-SAMSS-10.

F4 G13 B16 SP-97; ASTM A105N 6. GASKET ALLOWANCE 3 MM COMPRESSED

3 ELBOW 90; SCH. STD; BE x BE; ASME 48 WLAYAP-SA 1 7. PIPING MATERIAL IS

B16.9; ASTM A234 WPB PIPE SIZE SCHEDULE SPECIFICATION

REF TO MTO
FLANGES REF TO MTO REF TO MTO

48"NPD
4 WELDNECK FLANGE; CL 150; SCH. STD; 48 HOCYSP-SA 2
RF x BE; ASME B16.47-A; ASTM A350
LF2 Cl.2
5 WELDNECK FLANGE; CL 150; SCH. 80; 2 HACGXP-SA 5 8. WELDING STRESS RELIEF - YES NO
X
RF x BE; ASME B16.5; ASTM A105N 100% X-RAY SPOT X-RAY 01-SAMSS-10

S9 INSTRUMENTS 9. TESTING SHOP HYDROSTATIC TEST - YES NO

PH1-S4-48-11.13-700-C1 S8 THE SHOP HYDROSTATIC TEST SHALL BE CARRIED OUT ON PIECES HAVING ALL ENDS
5326

S10 6 G57-ZV-5067 48 INST 1 FLANGED. HYDROSTATIC TEST PRESSURE

THIS SUPPORT TO BE WELDED BEFORE LINING BR-P1-48-C1 PIPE SUPPORTS

G2-A2-48-2 10. ALL PIPING MATERIAL IS IN ACCORDANCE WITH SAUDI ARAMCO ENGINEERING SPECIFICATION

THIS SUPPORT TO BE WELDED BEFORE LINING 7 PIPE SUPPORT: SWH6-A2-48-700-100-C1 48 SUP 1 SAES-L-105 CLASS 1LE0P03 . ALL EXCEPTIONS ARE NOTED ON THE ISOMETRIC.
1

SEE ISO 8 PIPE SUPPORT: BR-P1-48-C1 48 SUP 3 11. INSULATION REQUIRED - YES NO
X
SEE ISO U02R2-G57-P-2750 9 PIPE SUPPORT: 48 SUP 1
INSULATION SHOWN ON DRAWING

U02R2-G57-P-2748 SHT 006 2X1"NPD RD-20041

PH1-S4-48-11.13-700-C1
X 9084400 X 9085132
22 10 PIPE SUPPORT: G2-A2-48-2 48 SUP 1
Y 9714507 79 Y 9714507
11 PIPE SUPPORT: G57-SPS-223 48 SUP 1

THIS DRAWING AND THE INFORMATION CONTAINED HEREIN ARE THE SOLE PROPERTY OF SAUDI ARAMCO. NO REPRODUCTION IN FULL, OR IN PART, SHALL BE OBTAINED FROM THIS DRAWING WITHOUT THE WRITTEN CONSENT OF SAUDI ARAMCO.
EL +101959 CLASS
EL +102691 FIELD MATERIALS
1LE0P03
CLASS FLANGES
F5 G14 B18
1LE0P03 S8 12 BLIND FLANGE; CL 150; RF; ASME 2 IACZXP-SA 1
3 55 CLASS SPOOLS TO BE FABRICATED BY VENDOR
EL +101959 3 729 729 BR-P1-48-C1 B16.5; ASTM A105N
F5 G14 B17 1SV0P01 NO.
MARK NO. SIZE
WEIGHT NO.
MARK NO. SIZE
WEIGHT

2 THIS SUPPORT TO BE WELDED BEFORE LINING GASKETS PIECES LBS PIECES LBS
48
"N 13 GASKET; CL 150; RF x RF; ASME 48 XABFFZ-SA 2
PD
Y 9714507 Y 9713955 16.20; 4.5 MM; SPIRAL WOUND; Inc.
2
S8 2 729 625WINDINGS; FLEXIBLE GRAPHITE
BR-P1-48-C1 29 F5 G15 B17 FILLED; WITH CS OUTER RING
2 7
THIS SUPPORT TO BE WELDED BEFORE LINING 14 INSULATING KIT; CL 150; RF x RF; 2 ZBBAIN-SA 4
729 277 SEE ISO AA-036865; REINFORCED PHENOLIC
F5 G14 B17 U02R2-G57-P-2748 SHT 007
S7 WITHNEOPRENE FACING
12 X 9083671
SWH6-A2-48-700-100-C1 15 GASKET; CL 150; RF x RF; ASME 2 XABFFZ-SA 1
178 Y 9713657
REF. SL-2157 77 G57 16.20; 4.5 MM; SPIRAL WOUND; Inc.
G14 B18 2 0 EL +101959
THIS SUPPORT TO BE WELDED BEFORE LINING ZV 625WINDINGS; FLEXIBLE GRAPHITE
19 1991 5067 FILLED; WITH CS OUTER RING SPOOLS TO BE FABRICATED BY SAUDI ARAMCO
STEM WEST 6 BOLTS NO.
MARK NO. SIZE
NO.
MARK NO. SIZE
PIECES PIECES
F5 1 16 STUD BOLTS; ASME B1.1; 1.1/2 YZZZFO-SA 88
SEE ISO 729
X 9084400 SEE ISO FLUOROPOLYMER COATED; ASTM A193 GR
U02R2-G57-P-2748 SHT 011
S11 Y 9713955 Y 9713657 U02R2-G57-P-2748 SHT 008 B7 / ASTM A194 GR 2H - 355 mm
X 9085132
G57-SPS-223 EL +101046 X 9084400 Length
Y 9713955
THIS SUPPORT TO BE WELDED BEFORE LINING Y 9710893
EL +101959
EL +101959
F4 G13 B16

REFERENCE DRAWINGS

DWG. CONTROL FOR J.O. 10-00631-0002 CD-969985

P&ID NO. CA-083073.002

LDT CD-083200.015

PIPING MATERIAL SPECIFICATION CE-082018

STANDARD PIPE SUPPORT CE-082064

TYPICAL PIPING ASSEMBLIES CD-082134

UNDERGROUND PIPING STANDARD DETAILS CD-082079

NOTES CONT.:
12. ALL DIMENSIONS AND CO-ORDINATES ARE IN MM.
13. FOR SMALL BORE LINES (UPTO 1-1/2" ) DIMENSIONS AND ROUTING SHALL BE FIELD ADJUSTED, BUTT FIELD
FOR SUPPORTING REFER TO PIPING PROCEDURE DOC.NO.05040-200-000-PPR-001. WELD WELD
14. ALL TIE INS POINTS SHALL BE VERIFIED BY CONSTRUCTION CONTRACTOR PRIOR FABRICATION AND
INSTALLATION.
15. FOR BOLT LENGTHS REFER ITEM DESCRIPTION.
16. SEAL WELDING REQUIREMENT OF THREADED JOINTS SHALL BE AS PER CL. NO. 9 OF SAES-L-110
17. FOR UG PIPING INSTALLATION DETAILS REFER TO DOC.NO.CD-082079. SOCKET SCREWED
REVISION VALIDATION
18. PRESSURE TESTING SHALL BE IN ACCORDANCE WITH SAES-A-004 IN ADDITION TO SAES-L-150 FOR WELD JOINT
METALLIC PIPING SYSTEMS AND SAES-S-070 FOR NON-METALLIC ONES. THIS REVISION NO. 00 IS COVERED, FOR ALL APPROVAL AND CERTIFICATION
19. NDT REQUIREMENT SHALL BE AS PER SAES-W-011, AS APPLICABLE. REQUIREMENTS, PER SAEP-334, UNDER DRAWING COMPLETION CERTIFICATE NO:
RADIOGRAPHIC TESTING SHALL BE PERFORMED AS PER SAEP-1143.
20. ALL PROCESS CONTAINING WELDS OTHER THAN BUTTWELDED SHALL BE 100% MP & LP FOR FERRO 10-00631-0002
MAGNETIC & NON FERROR MAGNETIC MATERIAL RESPECTIVELY. INSULATED TRACED DESIGN CERTIFICATION REVIEW FOR KEY DRAWINGS OTHER
21. PWHT SHALL BE AS PER B31.3 / B31.3-2012 & SAES-W-011, AS APPLICABLE. (DESIGN AGENCY) REQUIRED (SAUDI ARAMCO)
22. CONSTRUCTION OF PLANT PIPING SHALL BE IN ACCORDANCE WITH SAES-L-350. PIPE PIPE
ENGG./DATE CERTIFIED BY/DATE CONST. AGENCY/DATE OPERATIONS/DATE BY/DATE
23. PAINTING AND COATING WORKS SHALL BE AS PER PAINTING/COATING SCHEDULE (CA-969919). AHH MOH
24. INSULATION OF PIPING SHALL BE AS PER PROJECT INSULATION SPECIFICATION (CE-082019). 07/17/2023 07/17/2023
25. INSTRUMENT'S SYMBOL IN ISOMETRIC DRAWING MAY NOT MATCH WITH P&ID. REV.NO. DATE REVISION DESCRIPTION
26. FOR PIPE SUPPORT DETAILS REFER PIPE SUPPORT STD. NO. CE-082064, UNLESS OTHERWISE IDENTIFIED. PIPE SUPPORT
27. FOR BRANCH SIZE OF 1-1/2" AND BELOW, THE STIFFENING SHALL BE PROVIDED AS PER PIPE 00 07/17/2023 ISSUED FOR CONSTRUCTION
SUPPORT STD. NO. CE-082064. JOB ORDER/EWO NO.
28. FOR FIRE HYDRANTS AND MONITORS SUPPORTING REFFER TO CD-082079. THIS REVISION IS NOT TO BE USED FOR
29. FOR PERSONNEL PROTECTION INSULATED LINES, PAINTING SYSTEM IS SELECTED BASED 10-00631-0002 CONSTRUCTION UNTIL CERTIFIED AND DATED
ON USING INSULATION MATERIAL. IN CASE GUARD MESH IS UTILIZED, RELEVANT PAINTING
SYSTEM SHALL BE SELECTED FROM COATING MAP, DOCUMENT NUMBER: CA-969919-002
30. FOR DIESEL OIL (DO) LINES WITH PIPING MATERIAL CLASS (1CS1P), AND IN CASE OF SAUDI ARABIAN OIL COMPANY
PAINTING SYSTEM OF VALVES (AS SUPPLIED BY VENDOR) DIFFERS FROM PAINTING DRAWING TYPE

SYSTEM AS IDENTIFIED ON ISOMETRIC, VALVE PAINTING SHALL BE REMOVED AT SITE AND 48"-P-2748-1LE0P03 ISO
SELECTED PAINTING SYSTEM FOR LINE ON ISOMETRIC SHALL BE APPLIED ON VALVE
PROCESS
INT. CHEMICAL PIPING DESIGN OPERATING TEST PRESS. TEST RADIOGRAPHY % MT/LP INSULATION TRACING PAINTING STRESS LINE ID
FBE CLEANING MATERIAL TEMP. PRESS. TEMP. PRESS. (PSIG) MEDIUM SHOP FIELD THK. TYPE SYS NO. WET CRUDE HANDLING FACILITIES
LINED CLASS (DEG. F) (PSIG) (DEG. F) (MM.)
STRESS ANALYSES (PSIG) SAFANIYAH SAUDI ARABIA
BY CHECKED PLANT NO. INDEX DRAWING NUMBER SHT. NO. REV. NO.

YES 1LE0P03 200 250 108 180 427.5 Water 10 10 100 NOTE APCS-1D SYS-253 U02R2-G57-P-2748
24 NO. OF SHT: 011 G57 L RD-20039 004 00

Saudi Aramco 2825 ENG. (09/03)

RESTRICTED SMART CADD-03