EuropCorr® Two Inch High Pressure
Access Fitting Assemblies
MECHANICAL SYSTEM HYDRAULIC SYSTEM
The EuropCorr® standard high pressure The EuropCorr® high pressure two
access fittings permit access to systems inch hydraulic access fittings have the
under full operating pressure, eliminating advantage of no internal threads
any need of system shut-down. The thus avoiding galling problem which
access fittings allow safe and easy is common with mechanical system.
insertion and retrieval of corrosion The hydraulic system requires less
monitoring devices by means of a operational clearance when retrieving
MECHANICAL SYSTEM service valve and retrieval tool. due to the very small size hydraulic
The high pressure access fitting retrieval tool compared to a mechanical
assemblies for installation of corrosion retrieval tool which is almost double the
probes, corrosion coupons, sacrificial size.
sand probe and chemical injection/ Hydraulic access fittings come in different
sampling devices, are designed in mounting types: Welded (Flareweld,
different mounting types: Welded Buttweld), Threaded NPT, Flanged and
(Flareweld, Buttweld, Socketweld), Trapped. Four locking pins hold the
Threaded NPT, Flanged and Trapped. internal plug in position during retrieval
Access fittings can be mounted at operations.
any position of the pipeline that local
HYDRAULIC SYSTEM
operating conditions permit. Trap fittings The hydraulic system has the following
are usually mounted underneath of the advantages with comparison to the
pipeline for gathering samples of the traditional mechanical system:
liquids and residues that exist along the
bottom of pipeline. Monitoring through -- no internal threads
traps simulates the corrosive conditions -- low weight and small size retrieval
of stagnant locations that may exist in tool
the pipeline. -- less operational clearance
Access fittings may even be installed -- no external moving parts of the
under system pressure with the use of retrieval tool
a hot tap tool. -- increased safety during retrieval
The mechanical access fitting is also operation
HYDRAULIC SYSTEM
available as side Tee type for sacrificial
type sand probes or chemical injection/ The Hydraulic access fittings are also
sampling equipment. available as side Tee type access fittings
for sacrificial type sand probes or
chemical injection/sampling equipment.
Hydraulic adapters can be provided to
convert the existing two inch mechanical
system into 2 inch hydraulic system for a
safer and more reliable operation, such
converting can be done without having
HYDRAULIC ADAPTER a shutdown.
e-mail: info@europcorr.com - www.europcorr.com
EuropCorr® Two Inch High Pressure
Access Fitting Assemblies
ORDERING INFORMATION:
Height Weight
Part no. Pressure rating
Body style [mm /inch] [kg/lbs]
[bar/psi]
Hydraulic Mechanical Hydraulic Mechanical Hydraulic Mechanical
Flareweld
2x2 (for 2” line) 111102 211102 164.1/6.46 133.4 / 5.25 7.5 / 16.5 2.5 / 5.5 420 / 6090
3x2 (for 3” line) 111103 211103 164.1/6.46 133.4 / 5.25 7.5 / 16.5 2.5 / 5.5 420 / 6090
4x2 (for 4” line) 111104 211104 164.1/6.46 133.4 / 5.25 7.5 / 16.5 2.5 / 5.5 420 / 6090
6x2 (for 6” line) 111106 211106 164.1/6.46 133.4 / 5.25 7.5 / 16.5 2.5 / 5.5 420 / 6090
8-10x2 (for 8-10” line) 111108 211108 164.1/6.46 133.4 / 5.25 7.5 / 16.5 2.5 / 5.5 420 / 6090
12-18x2 (for 12-18” line) 111112 211112 164.1/6.46 133.4 / 5.25 7.5 / 16.5 2.5 / 5.5 420 / 6090
20-36x2 (for 20-36” line) 111120 211120 164.1/6.46 133.4 / 5.25 7.5 / 16.5 2.5 / 5.5 420 / 6090
Flat 111101 211101 164.1/6.46 133.4 / 5.25 7.5 / 16.5 2.5 / 5.5 420 / 6090
Buttweld
Buttweld 112101 212101 164.1/6.46 133.4 / 5.25 7.5 / 16.5 2.1 / 4.6 420 / 6090
Socketweld
3000 psi n/a 213101 n/a 133.4 / 5.25 n/a 1.9 / 4.2 207 / 3000
6000 psi n/a 213102 n/a 158.8 / 6.25 n/a 2.1 / 4.6 414 / 6000
NPT
3000 psi 114101 214101 164.1/6.46 133.4 / 5.25 6.7 / 14.8 1.7 / 3.7 207 / 3000
6000 psi 114102 214102 189.5/7.46 158.8 / 6.25 6.9 / 15.2 2.0 / 4.4 414 / 6000
Flanged, ANSI
150 LBS RF 115101 215101 165/6.5 133.4 / 5.25 9.0 / 19.8 4.5 / 9.9 19.6 /285
300 LBS RF 115102 215102 165/6.5 133.4 / 5.25 9.5 / 20.9 5.0 / 11.0 51 / 740
4/600 LBS RF 115103 215103 190/7.5 158.8 / 6.25 11.5 / 25.4 6.8 / 15.0 102 / 1480
9/1500 LBS RF 115104 215104 190/7.5 158.8 / 6.25 18.0 / 39.7 12.7 / 28.0 255.5 / 3705
2500 LBS RF 115105 215105 190/7.5 158.8 / 6.25 24.5 / 54.0 18.0 / 39.7 425.5 / 6170
150 LBS RTJ 115106 215106 165/6.5 133.4 / 5.25 9.0 / 19.8 4.5 / 9.9 19.6 / 285
300 LBS RTJ 115107 215107 165/6.5 133.4 / 5.25 9.5 / 20.9 5.0 / 11.0 51 / 740
4/600 LBS RTJ 115108 215108 190/7.5 158.8 / 6.25 11.5 / 25.4 6.8 / 15.0 102 / 1480
9/1500 LBS RTJ 115109 215109 190/7.5 158.8 / 6.25 18.0 / 39.7 12.7 / 28.0 255.5 / 3705
2500 LBS RTJ 115110 215110 190/7.5 158.8 / 6.25 24.5 / 54.0 18.0 / 39.7 425.5 / 6170
Flanged, API
2000 LBS RJ n/a 216101 n/a 158.8 / 6.25 n/a 6.8 / 15.0 138 / 2000
3/5000 LBS RJ n/a 216102 n/a 158.8 / 6.25 n/a 12.7 / 28.0 345 / 5000
10000 LBS RJ n/a 216103 n/a 158.8 / 6.25 n/a 18.0 / 39.7 690 / 10000
Parts Part No. Material * Special material for o-ring available on request to meet special service condition.
Temperature Rating: - 20 °F ( - 28.9 ° C ) to + 392 °F ( 200°C )
Locking pin for Hydraulic access fitting 117001 45H Access fittings in ASTM A350 LF2 have temperature rating - 45 °F ( - 49 ° C ) to + 392 °F ( 200°C )
Locking pin o-ring 117002 Viton Pressure rating 6000 PSI ( 420 BAR )
Material selection meets NACE MR0175/ISO 15156
Various alloys available for Access Fittings body to meet client’s design requirements and specifications.
For EU based users the equipment conforms to Pressure Equipment Directive (PED).
