Scribd
Upload
12 views1 page

Ball Valve.3

The document is a data sheet for a ball valve used in chemical injection, specifying its size range, ASME class, and design features. It details materials used, including ASTM specifications, and outlines relevant codes and standards for certification and testing. Additional requirements include valve operation indicators and third-party inspection mandates.

Uploaded by

ramdasjpec
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views1 page

Ball Valve.3

The document is a data sheet for a ball valve used in chemical injection, specifying its size range, ASME class, and design features. It details materials used, including ASTM specifications, and outlines relevant codes and standards for certification and testing. Additional requirements include valve operation indicators and third-party inspection mandates.

Uploaded by

ramdasjpec
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Project Name :

DATA SHEER FOR


Project Number:
BALL VALVE -3
Doc. No.
Rev 0 : PAGE 4 OF 6
BALL VALVE DATA SHEET
GENERAL DATA PIPE SPEC. A6671 VALVE TAG NO. Bt56 VENDOR CONFIRMATION(NOTE-4)

VALVE SIZE RANGE : 1/2" TO 2"


VALVE ASME CLASS : 150#
VALVE SERVICE : CHEMICAL INJECTION
VALVE TYPE : SPLIT BODY
VALVE END CONFIGURATION : FLANGED RAISED FACE
LENGTH : ASME B16.10, LONG PATTERN
FLANGE FACE FINISH : SMOOTH FINISH (RA=3.2 TO 6.4 MICRON)
VALVE BORE (REDUCED/FULL) : REDUCED BORE
CORRISION ALLOWANCE : 0mm

DESIGN

VALVE OPERATION : LEVER OPERATED


BALL SUPPORT : FLOATING BALL
LOCKING FACILITY : AS PER REQUISITION
BALL : SOLID
ANTI-STATIC : REQUIRED
ANTI-BLOW OUT SYSTEM : REQUIRED
FLOW DIRECTION : BI-DIRECTIONAL

MATERIALS

BODY/BONNET : ASTM A 351 CF8M


BALL : ASTM 182 GR F316
STEM : ASTM 182 GR F316L
PRIMARY SEATS : PTFE, ANTI-STATIC
RENEWABLE SEATS : SS316L
SEALS : PTFE
GLAND PACKING : GRAPHOIL
BOLTING : ASTM A193-B8M AND ASTM A194-8MA , PTFE + PHOSPHATE COATING
SEATSPRING : SS316

CODES AND STANDARDS

DESIGN CODE : BS 5351, ASME B16.34


FLANGE DIMENSIONS : ASME B16.5
CERTIFICATION : BS EN 10204 TYPE 3.1B
FIRE TEST : API 607 / BS 6755 PART 2 AS APPLICABLE /API 6FA
HYDROSTATIC TEST : API 598
OTHER APPLICABLE PROJ. SPEC. : PIPING MATERIAL SPECIFICATION GEN-SPC-PIP-5050
: VALVE SPECIFICATION GEN-SPC-PIP-5055

ADDITIONAL REQUIREMENTS / NOTES :


1) Short pattern valves are not acceptable.
2) Valves shall have position indicator showing open and close positions.
3) The requirement of Full bore and padlock facility shall be separately identified in the Valve Requisition.
4) Vendor shall fill the data with the offered material against the specified material.
5) Valves to be inspected by thrid party. Detail inspection reqirement refer to VDRL

You might also like