Project Name :

DATA SHEER FOR

BALL VALVE -4 Project Number:
Doc. No.
Rev 0 :

BALL VALVE DATA SHEET

GENERAL DATA

VALVE ASME CLASS 300# 1500#

900#
PIPE SPEC.

VALVE TAG NO.

VALVE SIZE RANGE 1/2" TO 1 1/2"

VALVE SERVICE INSTRUMENT AIR HYDROCARBON, ,UTILITIES, CHEMICAL INJECTION
:
VALVE TYPE : - SPLIT BODY

VALVE END CONFIGURATION SCREWED (NPT-F) SOCKET WELDED RING JOINT FLANGE FLANGED RAISED FACE NPT-F,SCREWED SOCKET WELDED
:
LENGTH : ASME B16.10, LONG PATTERN MANUFACTURER'S STD ASME B16.10, LONG PATTERN MANUFACTURER'S STD
FLANGE FACE FINISH : - SMOOTH FINISH (RA=3.2 TO 6.4 MICRON) -
VALVE BORE (REDUCED/FULL) : REDUCED FULL REDUCED FULL
CORRISION ALLOWANCE 0mm 1.6 mm 0mm 1.6 mm

DESIGN

VALVE OPERATION : LEVER OPERATED

BALL SUPPORT FLOATING BALL

:
LOCKING FACILITY : - AS PER REQUISITION

BALL : SOLID

ANTI-STATIC REQUIRED
:
ANTI-BLOW OUT SYSTEM REQUIRED
:
FLOW DIRECTION BI-DIRECTIONAL
:
GREASE/SEALANT INJECTION FITTING : REQUIRED FOR 8" & ABOVE

MATERIALS

BODY/BONNET ASTM A105N ASTM A105N/ASTM A216 WCB, MAX. 0.25%C ASTM A105N/ASTM A216 WCB, MAX. 0.25%C
: ASTM A351 CF8M
BALL ASTM A182-F316/ASTM 351 GR CF8M ASTM 182 GR F316 ASTM 182 GR F316L
: ASTM 182 GR F316
STEM ASTM 182 GR F316 ASTM 182 GR F316L ASTM 182 GR F316
:
PRIMARY SEATS
: PTFE, ANTI-STATIC
RENEWABLE SEATS SS304 SS316L
:
SEALS : VITON PTFE VITON
GLAND PACKING : FLEXIBLE GRAPHOIL
BOLTING : ASTM A193-B7 AND ASTM A194-2H , PTFE + PHOSPHATE COATING
SEATSPRING SS304
: SS316L

CODES AND STANDARDS

DESIGN CODE BS 5351, ASME B16.34

:
SCREW / END DIMENSIONS ASME B1.20.1 ASME B16.11 ASME B16.5 ASME B1.20.1 ASME B16.11
:
CERTIFICATION
: BS EN 10204 TYPE 3.1B
FIRE TEST
: API 607 / BS 6755 PART 2 AS APPLICABLE / API 6FA
HYDROSTATIC TEST
: API 598
OTHER APPLICABLE PROJ. SPE PIPING MATERIAL SPECIFICATION GEN-SPC-PIP-5050
:
VALVE SPECIFICATION GEN-SPC-PIP-5055
:

ADDITIONAL REQUIREMENTS / NOTES :

1) Short pattern valves are not acceptable.

2) Valves shall have position indicator showing open and close positions.

3) The requirement of Full bore and padlock facility shall be separately identified in the Valve Requisition.

4) Vendor shall fill the data with the offered material against the specified material.

5) Valves to be inspected by thrid party. Detail inspection reqirement refer to VDRL

6) Vendor has to confirm all data implied in the data sheet