Chartered Engineer & Component Person Authorized from U.P.
Government under Factory Act-1948
(Under clause (a) (iii) of sub-section (1) of Section 28/29 of Factories Act-1948)
REPORT OF EXAMINATION OF THE HOIST OR LIFT
1. Name of the Occupier (or Owner) of Premises : M/S MANLIFT INDIA PRIVATE LIMITED
2. Situation or address of Premises : C/O M/S THERMAX LTD ((FGD STAGE 1- 2X500MW)
NTPC – RIHAND -UTTAR PRADESH
3 a. Type of hoist or Lift and Identification No. : MANLIFT, MAKE: GINIE, SWING:3600
S. NO: Z8013-4406, BOOM LENGTH: 80 FEET
MODEL: Z-80
b. Location : PLANT
c. Capacity : 227 Kgs (SWL) (ONLY 2 PERSON + TOOLS)
(if ascertainable)
4. Design & Construction- Are all part of the : Yes
Hoist or lift of good mechanical construction
And sound material with adequate strength?
(so far as ascertainable)
5. Maintenance – Are the following part of hoist : Load Test has been performed.
or lift properly maintained and in good working Over load tripping tested
order? If not, state what defect have been found.
a. Enclosure of lift ways or Hoist ways : Telescopic Jib in good condition
b. Landing Gates and Cage Gates : In order
c. Interlocks on the Landing/Cage Gates : In order
d. Other Gate fasteners : In order
e. Cage and Platform and Cage fittings : In order
Guide buffers, interior of the hoist ways lift ways
f. Over running devices : In order
g. Wire rope or chains and the attachment : Hydraulically Operated Jib is in order.
h. Safety Gears for preventing fall of cage or Platform In order
i. Brakes In order
j. Other Electric Equipment’s : In order
k. Main Gear Box : In order
l. Other Parts : In order
6. What parts were inaccessible? : Internals Parts mounted on Chassis
7. Repairs, Renewals or alterations, if any, : Not Found
required and the period with in which the
same should be executed
8. Maximum safe working load subject to repairs : N/A
renewals or alterations, if any, specified in (07)
9. Result of Test : Hoist or Lift – Satisfactory
10. Others : Previous test report not seen.
I/ we certify that on dt. 21-08-2025 the equipment described above the thoroughly cleaned and (so far as construction
permits) made accessible for thorough examination and for such tests as were necessary and that on the said date. I
thoroughly examination this equipment including its fitting and that the above is a true report of my examination.
Competency No.: 3784 एफ/स०प्र०–उ०प्र० /संस्था/2025
Certificate No : MVS/UNO/UP/083073/2025 SIGNATURE AND SEAL
Next examination due on or before: 20-02-2026
SANJAY Digitally signed
by SANJAY
SRIVASTAVA SRIVASTAVA
SANJAY SRIVSTAVA
MVS ASSOCIATES (CHARTERED ENGINEER / COMPETENT PERSON)
‘MADHO SADAN’ 429, CIVIL LINES
UNNAO-U.P. -209801
Note: The above report is issue subject to daily checking of the above equipment and all its safety devices for its proper
Functioning and safe operations before using.
