Scribd
Upload
8 views1 page

Heater Ma

The document provides instructions for the removal, inspection, and installation of the front and rear heater main relays in an air conditioning system. It details the steps to disconnect the battery, remove the relays, check their continuity, and reinstall them. If the relays do not meet specified continuity values, they should be replaced.

Uploaded by

Alfredo De la Vega
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views1 page

Heater Ma

The document provides instructions for the removal, inspection, and installation of the front and rear heater main relays in an air conditioning system. It details the steps to disconnect the battery, remove the relays, check their continuity, and reinstall them. If the relays do not meet specified continuity values, they should be replaced.

Uploaded by

Alfredo De la Vega
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

AC–48

AIR CONDITIONING – HEATER MAIN RELAY

HEATER MAIN RELAY


FRONT HEATER MAIN RELAY AND REAR
HEATER MAIN RELAY REMOVAL
1. DISCONNECT NEGATIVE (–) TERMINAL CABLE
FROM BATTERY
2. REMOVE HEATER MAIN RELAYS FROM HEATER
RELAY BLOCK

FRONT HEATER MAIN RELAY AND REAR


HEATER MAIN RELAY INSPECTION
INSPECT HEATER MAIN RELAYS CONTINUITY

Tester connection to
Condition terminal number Specified value

If continuity is not as specified, replace the relay.

FRONT HEATER MAIN RELAY AND REAR


HEATER MAIN RELAY INSTALLATION
1. INSTALL HEATER MAIN RELAYS
2. CONNECT NEGATIVE (–) TERMINAL CABLE TO
BATTERY

You might also like