MINIATURE SENSORS C ATA L O G

SECTION S3N

S3Z
ADVANCED GLOBAL STYLE
MINIATURE PHOTOELECTIC
SENSOR
• 50-250 mm background suppression
• 0.7 m proximity, 150 mm with narrow beam
• 4 m polarized retroreflective
• 15 m through beam
• Light and dark trimmer models
• Standard 3-wire output configuration

APPLICATIONS

• Processing and Packaging machinery

• Electronics assembling
• Transportation lines, material handling
• Automatic warehouses
• Cosmetics and Pharmaceutical industry
• Small part detection with maximum accuracy

S3Z
Through beam 0…15 m
0…30 m (class 1 LASER)
Polarized retroreflective 0.05…4 m
0,3…10 m (class 1 LASER)
Retroreflective for transparent (on R2 reflector) 0…2 m
0…700 mm
Diffuse proximity
50…150 mm (narrow beam)
Background suppression 50…250 mm
40…300 mm (class 1 LASER)
Vdc 10…30 V
Power supply Vac
Vac/dc
PNP •
NPN •
Output NPN/PNP
relay
other
cable •
Connection connector •
pig-tail
Approximate dimensions (mm) 11x31x19
Housing material PC/PBT
Mechanical protection IP67

32 CATALOG | Photoelectric Sensors

 TECHNICAL DATA
30 mA max. (LED mod.)
Consumption (output current excluded)
35 mA max. (Laser mod.)
red LED 650 nm (mod. S3Z…T51)
red LED 665 nm (mod. S3Z…B01/C01)
red LED 670 nm (mod. S3Z…M01)
Light emission
IR LED 850 nm (mod. S3Z…C11)
IR LED 870 nm (mod. S3Z…F01/G00)
red Laser 650 nm (mod. S3Z…B01/F01/G00/M01)
sensitivity trimmer, 6 turns screw (mod. S3Z...M01),
Setting one turn sensitivity trimmer
LIGHT/DARK trimmer (Laser mod. S3Z...-PP, -NN), LIGHT (mod. S3Z...-PL, -NL),
Operating mode
DARK (mod. S3Z...-PD, -ND)
yellow OUTPUT LED, green STABILITY LED (mod. S3Z...B01/C01/C11/F01), POWER ON LED (mod.
Indicators S3Z...G00)
Output PNP or NPN (short circuit protection)
Output current 100 mA max.
2 V max. (LED mod.)
Saturation voltage
1,5 V max. (Laser mod.)
1 ms max. (LED mod.)
Response time
250 µs max. (Laser mod.)
500 Hz max. (LED mod.)
Switching frequency
2 kHz max. (Laser mod.)
2 m cable Ø 3,5 mm, M8 4-pole connector
Connection
Dielectric strength 500 Vac 1 min., between electronics and housing
Insulating resistance >20 MΩ 500 Vdc, between electronics and housing
Mechanical protection IP67
Ambient light rejection according to EN 60947-5-2
Vibration 0.5 mm amplitude, 10 … 55 Hz frequency, for every axis (EN60068-2-6)
Shock resistance 11 ms (30 G) 6 shock for every axis (EN60068-2-27)
Housing material body PBT, indicators cover PC
Lens material PMMA, PC (mod. S3Z…B01)
Operating temperature -25 ... 55 °C (LED mod.), -10 ... 55 °C (Laser mod.)
Storage temperature -40 … 70 °C (LED mod.), -25 ... 70 °C (Laser mod.)
Weight 50 g max. cable vers. , 10 g max. conn. vers.
DIMENSIONS S
DIMENSIONS SETTIN
Alignment S3Z…B01/T51
Alignment S3Z…B01/T51

DIMENSIONS
Position the sensor and reflect
OUTPUT LED Position the sensor and reflector on oppo
OUTPUT LED
OUTPUT LED
Turn the sensitivity trimmer t
POWER ON LED OUTPUT LED POWER ON LED
Turn the sensitivity trimmer to maximu
POWER ON LED (S3Z...G00) POWER ON LED (S3Z...G00)
yellow LED (OUT) is switch
(S3Z...G00) (S3Z...G00) yellow LED (OUT) is switched ON a
horizontal positions, and fix t
horizontal positions, and fix the senso
points.

ERIES
points.

ES
Optimum operation is obtained
Optimum operation is obtained when the
TRIMMER STABILITY LED TRIMMER If necessary, reduce sensitivity
STABILITY LED
If necessary, reduce sensitivity using the
TRIMMER STABILITY LED TRIMMER STABILITY LED
small or transparent targets. I
ON MANUAL
ANUAL S3Z
S3Z
F01/G00
S3Z
S3Z
B01/C01/C11/M01
S3Z...T51
S3Z...T51 small or transparent targets. In order to
procedure detailed above whils
procedure detailed above whilst progress
F01/G00 B01/C01/C11/M01 Alignment S3Z…F01/G00
Alignment S3Z…F01/G00
Position the sensors on oppos
Position the sensors on opposite sides.
Emitter or Receiver Find the points where the yello
Emitter or Receiver Receiver Emitter and Find the points where the yellow LED (O
Receiver both vertical and horizontal p
ROLS
Emitter and Receiver
Receiver both vertical and horizontal positions, a
Coaxial
between these points.
Coaxial
between these points.
CABLE Optimum operation is obtained
CABLE Optimum operation is obtained when the
VERSION Alignment S3Z…C01/C11 (LI
status. VERSION Alignment S3Z…C01/C11 (LIGHT mod
Position the sensor and turn th
1/F01) Position the sensor and turn the sensitivi
the green LED is ON and the y
the received signal has a safety the green LED is ON and the yellow LED
Place the target opposite the s
ved signal has a safety Emitter
Place the target opposite the sensor.
o the output switching value. Emitter
Turn the sensitivity trimmer
ut switching value. Turn the sensitivity trimmer clockwise
yellow LED turns ON (Target d
yellow LED turns ON (Target detected st
ONS
sor is operating.
rating. DIMENSIONS Dimensions in mm
Remove the target, the yell
Remove the target, the yellow LED
clockwise until the yellow LED
T51)
Dimensions in mm clockwise until the yellow LED turns O
pos.B). The trimmer reache
sensitivity; the operating distance pos.B). The trimmer reaches maximu
detected. Turn the trimmer to
y; the operating distance
se.
00 M8 CONNECTOR TECHNICAL
TECHNICAL DATADATA
detected. Turn the trimmer to the interm
two positions A and B. The gre
two positions A and B. The green LED m
For S3Z…C01/C11 models in
For S3Z…C01/C11 models in DARK mo
he cutoff distance (6 turns screw); S3Z…T51 S3Z…B01 S3Z…C01 S3Z…C11 S3Z…F01/G00 S3Z…M01 output are inverted.
10…30 VDC S3Z…T51 S3Z…B01 S3Z…C01 S3Z…C11 S3Z…F01/G00 S3Z…M01 output are inverted.
distance (6 turns screw);
ing the control clockwise. 2 Power 4 supply: 12 … 24 Vdc (operating limit 10…30Vdc); reverse polarity protected Alignment S3Z…M01
ntrol clockwise. Power supply: 12 … 24 Vdc (operating limit 10…30Vdc); reverse polarity protected Alignment S3Z…M01
Ripple: p-p 10% max. Position the sensor and turn th
Ripple: p-p 10% max. Position the sensor and turn the adjustm
S3Z…B01/C01/C11/F01/T51) 1 Current 3 consumption Place the
Place the target opposite the
target opposite the sensor at
ed to 250° by a mechanical stop. Current consumption
C01/C11/F01/T51) 30 mA max. desired. Turn the screw counte
by (output current excluded): 30 mA max. desired. Turn the screw counterclockwise
V a mechanical
adjusting
stop.
(max 0.05 Nm). (output current excluded): Verify the adjustment moving
Verify the adjustment moving the target
max 0.05 Nm). Output: DARK; PNP LIGHT; PNP tune the adjustment if necessa
LATION Output: DARK; PNP LIGHT or DARK; LIGHT; PNP tune the adjustment if necessary.
NDATA or NPN;
or NPN; LIGHT or DARK;
PNP or NPN; or NPN;
or NPN; It is recommended to operate w
It is recommended to operate with the sta
(short-circuit PNP or NPN; (short-circuit
eans of the two housing’s threaded (short-circuit (short-circuit protection) (short-circuit
e two housing’s threaded
2 or longer or M2.5 passing screw, protection) (short-circuit protection) protection)
r or M2.5 passing screw, protection) protection)
S3Z…F01/G00
with washers. S3Z…M01
Output current: 100 mA max.
rs. Output current: 100 mA max. TAB.1: S3Z…B01 max. opera
ng limit 10…30VDC);
o ease (Class 2 UL508)
the sensor positioning are reverse polarity protected TAB.1: S3Z…B01 max. operating dista
e sensor positioning Output saturation voltage: 2 V max.
ories listed in the 10% are
p-p catalogue).
max. Output saturation voltage: 2 V max. AVAILA
in the catalogue). Response time: 500us max 1 ms max. AVAILABLE REF
CTIONS 30mA max. mod.F01 Response35mAtime:max. 500us max 1 ms max. R1 R2
NS 15mA max. mod.G00 Switching
Switching frequency:
frequency:
1KHz max.
1KHz max.
500 Hz max.
500 Hz max.
-B01
R1
3
R2
5
R3
or DARK; PNP or NPN (short-circuit protection)
51 Indicators: OUT LED (YELLOW) -B01 3 5 4.5
100 mA max. Indicators: OUT LED (YELLOW)
STABILITY LED (GREEN) mod. B01/C01/C11/F01
V max. 1.5 V max. STABILITY LED (GREEN) mod. B01/C01/C11/F01 The sensors are NOT safety d
POWER ON LED (GREEN) mod. G00 The sensors are NOT safety devices, an
+ 10 … 30 Vdc250 us max. POWER ON LED (GREEN) mod. G00 safety control of t
30 Vdc
2KHz max. Setting:
Setting: SAFETY PRECAUTIONS TRIMMER (250°) 6 turns
6 turns safety control of the machin
DECLARATION OF CONFOR
TRIMMER (250°)
CAUTION - use of controls or adjustments or performance of procedures screwDECLARATION OF CONFORMITY
(YELLOW); STABILITY LED (GREEN) mod. B01/F01 screw We Datalogic Automation de
POWER
OUTPUT ON LED (GREEN) mod. G00 Operating temperature: other than-25 those … specified
+50 °C in this mannual may result in hazardous radiation We Datalogic Automation declare und
33
UT Operating temperature: -25 … +50 °C
exposure. -25 … +55 °C CATALOG | Photoelectric theseSensors
these products are conform
products are conform to the
mer (250°) 6 turns screw (UL) -25 … +55 °C successive amendments.
LIGHT/DARK Trimmer ATTENTION(UL) - L'utilisation des commandes, ainsi que les modifications de successive amendments.
Storage temperature: réglages ou de procédures d’exécution autres que ceux -40 … +70dans
specifiés °C ce WARRANTY
 CONNECTIONS INDICATORS AND SETTINGS
DIMENSIONS
S3Z...F01/G00/B01/C01/M01
CABLE
OUTPUT LED
Through beam emitter POWER ON LED
(S3Z...G00)
BROWN BROWN
10...30 Vdc 10...30 Vdc

S3Z SERIES BLACK

OUTPUT
DIMENSIONS
TRIMMER STABILITY LED TRIMME

NSTRUCTION
BLUE MANUAL
CONNECTIONS
0V BLUE
S3Z
0 VF01/G00
S3Z
B01/C01/C11/M01
DIMENSIONS
S3Z...T51
S3Z...T51
e EN 60947-5-2 standard. A
P
S3Z…G00 M8 CONNECTOR OUTPUT LED
POWER ON LED
Emitter or Receiver OUTPUT LED
T
Receiver POWER ON LED
Emitter and
BROWN
(S3Z...G00) (S3Z...G00) y
CONTROLS
1 Receiver
C + 10…30 VDC Coaxial h
2 4 p
ED M8 CONNECTOR O
LED indicates the output status. 1 TRIMMER 3 STABILITY LED TRIMMER STABILITY LED I
BLUE s
AL
LED (S3Z…B01/C01/C11/F01) 3
0 S3Z
V S3Z S3Z...T51 p
LED ON indicates that theNOT received
USED signal has a safety OUTPUT
F01/G00 B01/C01/C11/M01 Emitter
ater than 20% compared to the(WHITE)
output switching value. A
N LED (S3Z…G00)
TECHNICAL DATA (BLACK) S3Z...F01/G00/B01/M01/S3Z...-PP, -NN
P
Emitter or Receiver F
LED indicates that the sensor10...30 Vdc
is operating. Receiver 0V Emitter and
b
S3Z…B01 (BROWN) S3Z…F01/G00 (BLUE) S3Z…M01 Receiver

S3Z…B01/C01/C11/F01/T51)
12 … 24 VDC (operating limit 10…30VDC); (Class 2 UL508) reverse polarity protected Coaxial
b
r can be used to adjust sensitivity; the operating distance
p-p 10% max. CABLE O
urning the trimmer35mA
clockwise.
max.
30mA max. mod.F01
35mA max.
TECHNICAL DATA
VERSION A
15mA max. mod.G00
ENT SCREW (S3Z…M01) LIGHT or DARK; PNP or NPN (short-circuit protection) P
l can be used to adjust the cutoff distance (6 100
turns S3Z…T51 S3Z…B01 S3Z…C01 S3Z…Ct
mAscrew);
max.
ghas a safety
distance increases turning the1.5
control clockwise.
V max. Emitter Power1.5supply:
V max. 12 … 24 Vdc (operating limit 10…30Vdc);P
value.
250 us max. Ripple: p-p 10% max. T
SAFETY PRECAUTIONS
DIAGRAM LED MODELS
ONLY FOR TRIMMER (S3Z…B01/C01/C11/F01/T51)
OUTPUT LED (YELLOW);
he trimmer rotation is limited to 250° by a mechanical stop.
2KHz
STABILITY
max.
LED (GREEN)
Current consumption
mod.
(output
B01/F01
current excluded):
CAUTION - use of controls or adjustments or performance
Dimensions in mm
30 mA max. c
of procedures
y
R
POWER other than those specified in this mannual may result in hazardous radiation
y excessive torque when adjusting (max 0.05ON LED (GREEN) mod. G00
Nm). p
Trimmer (250°) Output:
6 turns screw exposure.DARK; PNP
ating distance
INSTALLATION LIGHT/DARK Trimmer
TECHNICAL DATA
ATTENTION - L'utilisation des commandes, ainsi que les
or NPN;
LIGHT or DARK
modifications de d
BACKGROUND SUPPRESSION - -10 … +55DIFFERENCE
°C (-10 … +50 °C UL Listed)TARGET
réglages ou de procédures d’exécution autres que ceux specifiés PNP ordans NPN;
ce t
Distance
DISTANCE
difference vs Reflectance
VS REFLECTANCE
target
THROUGH BEAM (short-circuit
mode -d'emploi
DETECTION peutAREA
entraîner une exposition à des rayonnements dangereux. F
can be positioned by means of the
-25two… +70 housing’s threaded
°C no freezing or condesation (short-circuit protec
using
turns two screws (M3x12 or longer or M2.5 passing screw, S3Z…T51 20…250mm
20,0%
screw); S3Z…B01 S3Z…C01 protection)
This product emits aDetection
S3Z…C11 visible diagram
laser beam.
S3Z…F01/G00
S3Z-F/G
Do not stare into the beam directly.
S3Z…M01 o
0.3...10 m on R2 Furthermore, do not look the laser which is reflected at a mirror-like object.
6%0...30 m
ximum
ise. tightening torque) Power White90%
supply:
with washers.
White 90%/Black
/ Black 6% Output
12
(white …current:
paper 24 Vdc mm)
200x200 (operating
900,00
limit
About10…30Vdc);
safety standards reverse polarity protected ”Safety 100 mA max. A
[mm]

800,00 of laser product, IEC60825-1 of laser products”

10,0%
entable fixing brackets to ease500
Ripple: the
Vacsensor
1 min., positioning are
between electronics and Output
housing saturation voltage:700,00 has been stipulated by the IEC (International Electortechnical Commission).
p-p 10% max. 2 V max. P
lease refer to the accessories listed in 500
the catalogue).
600,00 This product is classified as “CLASS1 product” according to IEC60825-1
01/T51) 0,0%
>20 M
Current consumption Vdc, between electronics andResponse housing time: 500,00
(2007). 500us
Use a UL max
Listed (CYJV/CYJV7) mating connector/cord assembly 1 msP
when
anical stop. CONNECTIONS
0 (output
---
50 current excluded):
---
100 150
40…300 mm
200 Switching
400,00
250 frequency: 300,00
10%
30connector
using mA1KHz max.
type as UL/c-UL listed products.
max.
CAUTION - This Product complies with
500
d
HV
Nm). 200,00

Ø6 mmOutput: DARK;Indicators:
PNP LIGHT;
OUT LED PNP(YELLOt
-10,0%
@3m Ø0.2 mm @ 170 mm 21 CFR 1040.10 and 1040.11 except for
1/C01/C11/F01/M01/T51 LIGHT pursuant
or DARK;
100,00
Ø6 mmWhite @ 390%
White m/ Grey
(opaque)
90%/Grey 18%
18%
(opaque) or NPN; (copper wire) 0,00
deviations 5,00 to Laser Notice No.
STABILITY LED or NPN;
20,00 (GREEN) 25,00 mod. BI
50, PNP
dated or NPN;
-100,000,00 10,00 15,00
-20,0% Red Laser diode(Emission wavelength: 650nm) June 24, 2007, issued by
BROWN (short-circuit -200,00
(short-circuit
and POWER ON LED (GREEN
ng’s threaded 1
+ 10IEC/JIS
… 30 VdcCLASS1 * ; Maximum output: 7mW
-300,00 (short-circuit
CDRH protection)
(Center of Devices
assing screw,
-30,0%
protection)
Setting: -400,00 Radiological Health) under FDA (Food protection)
Output current: according to EN 60947-5-2 -500,00 and Drug Administration).
100 mA max. TRIMMER (250°)
0.5 mm amplitude, 10 … 55 Hz frequency, for every axis (EN60068-2-6) -600,00
ATTENTION - Ce produit est conforme T
BLACK
ositioning -40,0%
are 4
Output OUTPUT
saturation
11 ms (30 G) voltage: 2 V max.
-700,00
Operating temperature:-800,00
6 shock for every axis (EN60068-2-27) aux normes 21 CFR 1040.10 et 1040.11,
ogue). -25 …
à l'exception des
+50 °C relatives au document « Laser Notice No.50 -25 …
Response time: Body PBT / indicators 500us max
cover PC -900,00
1 dérogations
(UL)
24 juin 2007 émis
ms max.
par CDRH (Center of Devices and Radiological Health)
» du
de la
-50,0% PMMA
Switching frequency: 1KHz Storage
max. temperature: 500
DrugHz max.
[m]
BLUE FDA (Food and Administration).
3
0 V White target ON DistanceIP67
(mm) -40 … +70 °C
Labels: Following “Warning label” and “Certification/ Identification label” are
Indicators: Operating OUT
distance (minimum): LED
affixed on 2m
(YELLOW)
on R2according to IEC 60825-1 and 50…150
2 m cable  3.5 mm / M8-4 pole connector ** this product laser regulation of FDA.
STABILITY LED When
(GREEN) mod. will
this reflector
product see tab.1into final device system which
B01/C01/C11/F01
be incorporated 0…70 is c
50 g. max. cable versions / 10 g. connector versions mm
0 POLARIZED RETROREFLECTIVE - DETECTION AREA POWER
DIFFUSEON LEDto-(GREEN)
exported
PROXIMITY the USA, make
DETECTION mod.
AREAsure G00
that Certification/Identification label is affixed.
egulations 21CFR
BROWN1040.10 and 1040.11 based on Notice No.50. Difference on White 90% / Gray The sensors are NOT safety devices, and so MUST NOT be used
Setting:
1
+ Detection diagram S3Z-C ---
6 turns
ating connector/cord assembly when … Detection
10using
30 Vdc diagram
connector as UL/c-UL listed18%
typeS3Z-B products. TRIMMER (250°)in the safety control of the machines where installed. D
20
screw
[mm]

SETTING RED RED INFRARW

140,00 R5
DECLARATION OF CONFORMITY
[mm]

120,00
Operating temperature: Emission
-25 … +50 °C type: 15
t
100,00
We Datalogic(650 nm)
Automation
-25 … +55 declare under
°C (665
our nm)
sole responsibility that(850 thesenm
Alignment S3Z…M01 (UL) products are conform to the 2004/108/EC Directive and successive s
Ambient light rejection: 10 according to EN 6094
80,00
posite sides. 60,00 Referring to the table below, adjust the distance of the photoelectric sensor amendments.
m. Find the points
40,00 where Storage temperature:
when necessary. The table
R2 explains the status of operation LED when the
Vibration: -40 … +70 °C0.5 mm amplitude, 10 … 55 Hz frequency, fW
WARRANTY
BLUE 3
5
nd OFF in both vertical Operating
20,00 operation0 V distance
mode is set(minimum):
to light ON. 2m on R2 50…150
Datalogic Automation warrants its products to be free from 50…250
defects. D
e sensor in the 0,00
centre Shock resistance:
see tab.1 0…70 cm
Datalogic Automation 11replace,
will repair or ms (30
0...20 m G)
free 6 shock
of charge, any for every
product axD
found
Distance reflector 0
mm mm.
-20,00 0
ion is obtained when the
1000 Step 2000 3000
control
4000 5000 Adjusting
6000
LIGHT/DARK
procedure
7000 8000
selection: 0 to100be defective
200 300during400 the 500
warranty 700 dependently
600 period of 36
800 months
900 from
1000 the
from the f
TORE M8 -60,00
-40,00
Difference on White 90% / Gray -5 manufacturing date. This warranty does not cover damage22% @ deriving m
or liability
PNP/NPN Output
Install a photoelectric sensor and the sensing --- dependently
from the improper application of Datalogic Automation products . from the
the trimmer, -80,00
in order to 18% 200mm.
object. Turn the controlHousing: Body PC and PBT / indicatoT
ets. In order-100,00
to improve
-120,00 2
detailed above Emission
whilst
1 4 type: RED
counter-clockwise until the -10
RED
operation LED turns OFF. Then turn clockwise until
Lenses: -15
DATALOGIC AUTOMATION srl
INFRARED INFRARED
Via Lavino 265 - 40050 Monte S.Pietro - Bologna – Italy
PMMA PC
RED i
-140,00 the operation LED(650
turnsnm)
ON (point A). (665 nm) Tel: +39 051 (850 nm)
6765611 - Fax: +39 051 (870 nm) www.datalogic.com
6759324 (670 nm) D
Protection class: Italian and European laws, Datalogic Automation is IP67
1 Ambient3 light rejection:Remove the sensing object, then [mm]
the operation LED
according Under
-20
to EN 60947-5-2
current not obliged V
Connections: 2(EN60068-2-6)
m ofcable
to take care of product disposal at the end of its life.
 3.5 mm / [mm] M8-4 pT
2
Vibration:
Shock resistance:
turns OFF. Turn 0.5
clockwise
Weight:
turns ON, the background
mm
until theamplitude,
is detected11
operation 10
LED … 55 Hz frequency,
Datalogic Automation for every
Recommends
local laws or contact authorised waste
msB).(30 G) 6 shock
(point for every axis (EN60068-2-27)
axis
to dispose
50 g.collection
the product in compliance with
max. centres.
cable Datalogic
versions / 10 g. c
Automation
OUT) is switched ON and reserves the right to make modifications and improvements without prior
tions, and fix the sensorLIGHT/DARK selection: dependently from
notification. the model
© 2012 – 2015 Datalogic Automation - ALL RIGHTS RESERVED - Protected to the
PNP/NPN Output Set the middle point between point A and B as dependently from
underthe
U.S. model
3
fullest extent and international laws. • Copying, or altering of this document
e green LED is ON.
Housing: point C. Body PC and PBT / indicators cover PC
is prohibited without express written consent from Datalogic Automation. Datalogic and
the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries,
34 CATALOG
Lenses:| Photoelectric Sensors PMMA PC including the U.S.A. and the E.U. PMMA ©
f
Protection class: IP67 821003301 Rev. B i
 NARROW BEAM PROXIMITY - DETECTION AREA POLARIZED RETROREFLECTIVE FOR TRANSPARENT - DETECTION AREA

mm
mm

m
mm

DIAGRAMS LASER MODELS

BACKGROUND SUPPRESSION - DETECTION AREA BACKGROUND SUPPRESSION - SPOT DIMENSION
mm mm Background Suppression Spot size (Typical)
3
3.0

2 Black 6%
2.5
Lateral Displacement Y (mm)

1
2.0
Spot size (mm)

0
1.5

-1 Lateral direction
1.0

-2
White 90% 0.5 mm
Axial direction
-3 mm
0 100 200 300 400 0.0
Sensing Distance X (mm) 0 50 100 150 200 250 300 350 400 450 500
Distance (mm)

POLARIZED RETROREFLECTIVE - DETECTION AREA POLARIZED RETROREFLECTIVE - EXCESS GAIN

100
mm
15
R5
10
Lateral Displacement Y (mm)

R5
Excess Gain

5
R2
10
0
R2
-5

m
-10
Operation 1
-15 level 0 5 10 15 20
0 1 2 3 4 5 6 7 8 9 10 m Sensing Distance (m)
Sensing Distance X (m)

THROUGH BEAM - DETECTION AREA THROUGH BEAM - EXCESS GAIN

mm 100
30

20
Lateral Displacement Y (mm)

10
Excess Gain

10
0

-10

-20 m
Operation
-30 1
level 0
0 5 10 15 20 25 30 35 40 45 50 m 10 20 30 40 50
Sensing Distance X (m) Sensing Distance X (m)

CATALOG | Photoelectric Sensors 35

MODEL SELECTION AND ORDER INFORMATION
OPTIC FUNCTION EMISSION CONNECTION OUTPUT MODEL ORDER
NO.
2 m Cable PNP - LIGHT S3Z-PR-2-C01-PL 95B010040
M8 Connector PNP - LIGHT S3Z-PR-5-C01-PL 95B010050
2 m Cable PNP - DARK S3Z-PR-2-C01-PD 95B010060
M8 Connector PNP - DARK S3Z-PR-5-C01-PD 95B010070
2 m Cable NPN - LIGHT S3Z-PR-2-C01-NL 95B010200
M8 Connector NPN - LIGHT S3Z-PR-5-C01-NL 95B010210
Narrow beam diffuse proximity LED
2 m Cable NPN - DARK S3Z-PR-2-C01-ND 95B010220
M8 Connector NPN - DARK S3Z-PR-5-C01-ND 95B010230
2 m Cable PNP - LIGHT/DARK S3Z-PR-2-C01-PP 95B010670
M8 Connector PNP - LIGHT/DARK S3Z-PR-5-C01-PP 95B010690
2 m Cable NPN - LIGHT/DARK S3Z-PR-2-C01-NN 95B010660
M8 Connector NPN - LIGHT/DARK S3Z-PR-5-C01-NN 95B010680
2 m Cable PNP - LIGHT S3Z-PR-2-C11-PL 95B010001
M8 Connector PNP - LIGHT S3Z-PR-5-C11-PL 95B010011
2 m Cable PNP - DARK S3Z-PR-2-C11-PD 95B010021
M8 Connector PNP - DARK S3Z-PR-5-C11-PD 95B010031
2 m Cable NPN - LIGHT S3Z-PR-2-C11-NL 95B010161
M8 Connector NPN - LIGHT S3Z-PR-5-C11-NL 95B010171
Long diffuse proximity LED
2 m Cable NPN - DARK S3Z-PR-2-C11-ND 95B010181
M8 Connector NPN - DARK S3Z-PR-5-C11-ND 95B010191
2 m Cable PNP - LIGHT/DARK S3Z-PR-2-C11-PP 95B010630
M8 Connector PNP - LIGHT/DARK S3Z-PR-5-C11-PP 95B010650
2 m Cable NPN - LIGHT/DARK S3Z-PR-2-C11-NN 95B010620
M8 Connector NPN - LIGHT/DARK S3Z-PR-5-C11-NN 95B010640
2 m Cable PNP - LIGHT S3Z-PR-2-B01-PL 95B010081
M8 Connector PNP - LIGHT S3Z-PR-5-B01-PL 95B010091
2 m Cable PNP - DARK S3Z-PR-2-B01-PD 95B010101
M8 Connector PNP - DARK S3Z-PR-5-B01-PD 95B010111
2 m Cable NPN - LIGHT S3Z-PR-2-B01-NL 95B010241
M8 Connector NPN - LIGHT S3Z-PR-5-B01-NL 95B010251
LED
2 m Cable NPN - DARK S3Z-PR-2-B01-ND 95B010261
M8 Connector NPN - DARK S3Z-PR-5-B01-ND 95B010271
Polarized retroreflective
2 m Cable PNP - LIGHT/DARK S3Z-PR-2-B01-PP 95B010590
M8 Connector PNP - LIGHT/DARK S3Z-PR-5-B01-PP 95B010610
2 m Cable NPN - LIGHT/DARK S3Z-PR-2-B01-NN 95B010580
M8 Connector NPN - LIGHT/DARK S3Z-PR-5-B01-NN 95B010600
2 m Cable PNP - LIGHT/DARK S3Z-PH-2-B01-P 95B010440
M8 Connector PNP - LIGHT/DARK S3Z-PH-5-B01-P 95B010460
LASER
2 m Cable NPN - LIGHT/DARK S3Z-PH-2-B01-N 95B010450
M8 Connector NPN - LIGHT/DARK S3Z-PH-5-B01-N 95B010470
2 m Cable PNP - LIGHT S3Z-PR-2-FG01-PL 95B010121
M8 Connector PNP - LIGHT S3Z-PR-5-FG01-PL 95B010131
2 m Cable PNP - DARK S3Z-PR-2-FG01-PD 95B010141
M8 Connector PNP - DARK S3Z-PR-5-FG01-PD 95B010151
2 m Cable NPN - LIGHT S3Z-PR-2-FG01-NL 95B010281
M8 Connector NPN - LIGHT S3Z-PR-5-FG01-NL 95B010291
LED
2 m Cable NPN - DARK S3Z-PR-2-FG01-ND 95B010301
M8 Connector NPN - DARK S3Z-PR-5-FG01-ND 95B010311
Through beam
2 m Cable PNP - LIGHT/DARK S3Z-PR-2-FG01-PP 95B010710
M8 Connector PNP - LIGHT/DARK S3Z-PR-5-FG01-PP 95B010730
2 m Cable NPN - LIGHT/DARK S3Z-PR-2-FG01-NN 95B010700
M8 Connector NPN - LIGHT/DARK S3Z-PR-5-FG01-NN 95B010720
2 m Cable PNP - LIGHT/DARK S3Z-PH-2-FG01-P 95B010520
M8 Connector PNP - LIGHT/DARK S3Z-PH-5-FG01-P 95B010540
LASER
2 m Cable NPN - LIGHT/DARK S3Z-PH-2-FG01-N 95B010530
M8 Connector NPN - LIGHT/DARK S3Z-PH-5-FG01-N 95B010550
2 m Cable PNP - LIGHT S3Z-PR-2-M01-PL 95B010331
M8 Connector PNP - LIGHT S3Z-PR-5-M01-PL 95B010351
2 m Cable NPN - LIGHT S3Z-PR-2-M01-NL 95B010321
M8 Connector NPN - LIGHT S3Z-PR-5-M01-NL 95B010341
LED
2 m Cable PNP - LIGHT/DARK S3Z-PR-2-M01-PP 95B010750
M8 Connector PNP - LIGHT/DARK S3Z-PR-5-M01-PP 95B010770
Background suPression
2 m Cable NPN - LIGHT/DARK S3Z-PR-2-M01-NN 95B010740
M8 Connector NPN - LIGHT/DARK S3Z-PR-5-M01-NN 95B010760
2 m Cable PNP - LIGHT/DARK S3Z-PH-2-M01-P 95B010480
M8 Connector PNP - LIGHT/DARK S3Z-PH-5-M01-P 95B010500
LASER
2 m Cable NPN - LIGHT/DARK S3Z-PH-2-M01-N 95B010490
M8 Connector NPN - LIGHT/DARK S3Z-PH-5-M01-N 95B010510
2 m Cable NPN - DARK S3Z-PR-2-T51-ND 95B010390
Polarized retroreflective 2 m Cable PNP - DARK S3Z-PR-2-T51-PD 95B010380
for transparent LED
M8 Connector NPN - DARK S3Z-PR-5-T51-ND 95B010370
M8 Connector PNP - DARK S3Z-PR-5-T51-PD 95B010360

36 CATALOG | Photoelectric Sensors

ACCESSORIES
ST-505 ST-5039 ST-5046

ST-5040
SLIT
M18 ADAPTER NOSE

MODEL SELECTION AND ORDER INFORMATION

MODEL DESCRIPTION ORDER NO.
ST-505 lateral mounting 95ACC2800
ST-5039 L-shaped fixing bracket 95ACC2270
ST-5040 protection bracket with vertical fixing 95ACC2280
(only for cable versions)
ST-5046 protection bracket with horizontal fixing 95ACC2370
S3Z-SLIT1 Ø 0,5 mm slit for through beam 95ACC2470
S3Z-SLIT2 Ø 1 mm slit for through beam 95ACC2480
S3Z-SLIT3 Ø 2 mm slit for through beam 95ACC2490
S3Z-SLIT4 0,5x18 mm slit for through beam 95ACC2500
S3Z-SLIT5 1x18 mm slit for through beam 95ACC2510
S3Z-SLIT6 2x18 mm slit for through beam 95ACC2520
ST-S3Z-M18 S3Z FIX BRK M18 THREADED NOSE 95ACC7850

CABLES
TYPE DESCRIPTION LENGTH MODEL ORDER No.
3m CS-B1-02-G-03 95A251420
5m CS-B1-02-G-05 95A251430
4-pole, grey, P.V.C.
7m CS-B1-02-G-07 95A251440
Axial M8 Connector
10 m CS-B1-02-G-10 95A251480
2m CS-B1-02-R-02 95A251620
4-pole, P.U.R.
5m CS-B1-02-R-05 95A251640
3m CS-B2-02-G-03 95A251450
5m CS-B2-02-G-05 95A251460
4-pole, grey, P.V.C.
7m CS-B2-02-G-07 95A251470
Radial M8 Connector
10 m CS-B2-02-G-10 95A251530
2m CS-B2-02-R-02 95A251630
4-pole, P.U.R.
5m CS-B2-02-R-05 95A251650

37