2016-2017

SOLDERING IRONS, EQUIPMENT & ACCESSORIES

TAIYO ELECTRIC IND. CO., LTD.

Vol.49
SOLDERING SYSTEM

SMT PRODUCTS

SOLDERING STATIONS

SOLDERING IRONS

SOLDER POTS

DESOLDERING
PRODUCTS

SOLDERS

SOLDERING
ACCESSORIES

TESTERS

HEATED TOOLS

HAND TOOLS

HIROSHIMA JAPAN
2 soldering irons can be used.

AUTOMATIC SOLDER FEEDER p.30

TEMPERATURE-CONTROLLED, LEAD-FREE
DUAL-PORT SOLDERING STATION
FD-110/100
RX-822AS p.20
Solder or desolder small parts
in small space
NEW

6 seconds to set temperature.

The ultimate solution
for lead-free soldering
TEMPERATURE-CONTROLED LEAD-FREE
MICRO SOLDRING STATION

RX-812AS p.18

NEW
500W Ultra high power soldering
station

RX-892AS
p.16

TEMPERATURE-CONTROLLED p.24
LEAD-FREE SOLDERING STATION
Phenomenal heat recovery with
RX-802AS 150W compact high-output heater.

TEMPERATURE-CONTROLLED
LEAD-FREE SOLDERING STATION p.22

RX-852AS

Nitrogen improves solder wetting

and fillet shape.

TEMPERATURE-CONTROLLED p.26
LEAD-FREE NITROGEN SOLDERING STATION
DESKTOP SOLDERING SYSTEM p.10
RX-802ASPH
FA-1000
2
 CONTENTS

SYSTEM
SOLDERING
SOLDERING SYSTEM
•Soldering System •Solder Feeder Unit
•Soldering Unit •Sliding Unit •Solder Reel Holder

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
LEAD-FREE TEMPERATURE-CONTROLLED SOLDERING STATIONS
•500 W Ultra high power soldering station •Lead-Free Micro Soldering Station
•Lead-Free Dual-Port Soldering Station •Lead-Free Soldering Station •Lead-Free Nitrogen Soldering Station
•N2 Station •Lead-Free Automatic Solder Feeder

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

TEMPERATURE-CONTROLLED SOLDERING STATIONS
•Temperature-Controlled Soldering Stations
•Mini Soldering Stations •Soldering Controllers

TEMPERATURE-CONTROLLED SOLDERING IRONS

•High Heat Volume Temp-Controlled Soldering Iron
•Temperature-Controlled Soldering Iron •Fixed-Temperature Soldering Irons
•Tip Thermometer •Soldering Tester

HIGH-EFFICIENCY SOLDERING IRONS

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

•Quick-Heat Soldering Irons •Precision PCB Soldering Irons •Precision-Component
•Mounting-Board Soldering Irons •Precision-Component •Mounting-Board Soldering Irons
•High-Power Soldering Irons •Temperature-Controlled •Stained-Glass Soldering Iron •Stained-Glass Soldering Irons

NICHROME HEATER / SPECIAL PURPOSE / GAS-POWERED SOLDERING IRONS

•General Electronics Soldering Irons •Sheet-Metal Soldering Irons
•Dual-Power Soldering Irons •Portable Soldering Iron With Cap •Low-Voltage Soldering Irons
•Starter Kit (Electronics/ Craft & Hobby) •Gas-Powered Soldering Iron

SOLDERING TESTER / TIP THERMOMETER

•Soldering Tester •Tip Thermometer •Sensor Unit

SOLDER POTS
SOLDER POTS
•Solder Pots •PCB Dipping Holder

PRODUCTS
SURFACE-MOUNT / SMT
SURFACE-MOUNT/ SMT PRODUCTS
•Hot-Air Rework Stations •Handpiece Holders •Board Holders •Preheaters
•SMT Rework Repair System •Hot-Air Pencil •Reball Kit •Soldering Tweezers

DESOLDERING PRODUCTS

DESOLDERINGS
•Service Stations •Automatic Desoldering Stations •Portable Desoldering Guns
•Desoldering Wicks •Desoldering Suckers

SOLDERING ACCESSORIES
SOLDERING
ACCESSORIES

•Air Purifying Fume Vacuum •Anti-Static Mats •Wrist Straps •Surface Resistivity Meter •Low-Dust Gloves
•Anti-Static Gloves •Solder Assist •Precision Tweezers •Heat Clips •Tip Refresher
•Tip Cleaners •Soldering Iron Stands •Solder Reel Holders
•Magnifiers •Mini Vise •Core Alignment Tools •Ceramic Core Drivers •Maintenance Tool Sets
MATERIALS
SOLDERING WORK HEATED TOOLS

SOLDERING WORK MATERIALS

•Lead-Free Spool Solders •Special Spool Solders •Soldering Pastes •Anti-Seize Paste

HEATED TOOLS
•Hot Bond •Mini Hot Bond •Hot Sticks •Power Controller •Hot Slicer •Hot Knife

HAND TOOLS
HAND TOOLS

Air-Powered Depaneling Tool •Super Cutters •Hobby Nippers •Hobby Pliers •Manual Depaneling Tools
•Precision Nippers •1.5 mm Platform Nippers •Precision Pliers •Crimping Pliers •Wire Strippers
•Manual Depaneling Tool • Precision Wire Strippers •Cable Strippers

3
 Key to Icons
B
Meets RoHS directive.
RoHS BS-10/15/850 SOLDERING PASTES…………………… 92
BS-2 TIP REFRESHER……………………… 88/92
A product specifically designed to BS-H20B ANTI-SEIZE…………………………… 92
LEAD handle lead-free solder applications.
FREE C
A produc t made of anti-magnetic CA-30R/40R PORTABLE SOLDERING IRON WITH CAP…… 48
SST stainless steel. CD-10
CD series
CORE ALIGNMENT TOOLS………………… 90
CERAMIC CORE DRIVERS………………… 90
A product which is manufactured using CP/CPN series DESOLDERING WICKS………………… 80/81
ANTI anti-static materials. CS-21/31 PRECISION PCB SOLDERING IRONS………… 42
STATIC
CXR-31/41 PRECISION-COMPONENT SOLDERING IRONS… 43
Material Safety Data Sheet available. CXR-60/80/100 HIGH-POWER SOLDERING IRONS………… 43
MSDS F
Meets EC directives. FA-1000 SOLDERING SYSTEM…………………… 10
[Model name / voltage may differ.] FD-100/110 AUTOMATIC SOLDER FEEDER……………… 30
G
GP-101S GAS-POWERED SOLDERING IRON………… 50
GP-501 GAS-POWERED SOLDERING IRON………… 50
GP-510 GAS-POWERED SOLDERING IRON………… 51
GP-510SET GAS-POWERED SOLDERING IRON SET……… 51
GSR series SMT REWORK REPAIR SYSTEM…………… 66
GS series DESOLDERING SUCKERS………………… 82

H
H-1S/1L/2SL HEAT CLIPS [HEAT SINK]………………… 87
HB-45 MINI HOT BOND………………………… 96
HB-100S/200S HOT STICKS…………………………… 97
HB-40S HOT STICKS…………………………… 97
HB-80 HOT-BOND…………………………… 96
HE-110 HOT SLICER…………………………… 98
HOT-30R/60R HOT KNIVES…………………………… 98
HP-150/200/300 SHEET-METAL SOLDERING IRONS………… 47
HRC-401 STAINED-GLASS SOLDERING IRON………… 44
HRC-80/100 STAINED-GLASS SOLDERING IRONS……… 44

4
 SYSTEM
SOLDERING
K T

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
KS series GENERAL ELECTRONICS SOLDERING IRONS…… 46 T series COPPER TIPS…………………………… 49
KX series GENERAL ELECTRONICS SOLDERING IRONS…… 46 TL-10/20 MAINTENANCE TOOL SETS……………… 90
KYP-60/70 DUAL-POWER SOLDERING IRONS………… 48 TM-100 TIP THERMOMETER…………………… 56
TM-100SU SENSOR UNIT………………………… 56
M TM-200 SOLDERING TESTER…………………… 54

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

MI-6-6 V/MI-6-12 V LOW-VOLTAGE SOLDERING IRONS………… 48 TP-100AS/100 PORTABLE DESOLDERING GUNS…………… 78
TP-200AS AUTOMATIC DESOLDERING STATION……… 77
N
TP-280AS AUTOMATIC DESOLDERING STATION……… 76
NC-100R N2 STATION…………………………… 27 TQ-77/95 QUICK-HEAT SOLDERING IRONS…………… 42
TS series PRECISION TWEEZERS…………………… 87
P
W
PCB-1 PCB DIPPING HOLDER…………………… 58
POT-100C SOLDER POT [stainless bath]…………… 59 WA-400 SURFACE RESISTIVITY METER…………… 85
POT-103C SOLDER POT [cast-iron bath]…………… 59 WD-13/130 ANTI-STATIC MATS……………………… 85
POT-200C SOLDER POT [stainless bath]…………… 59 WG-1/2 series LOW-DUST GLOVES……………………… 86

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

POT-203C SOLDER POT [cast-iron bath]…………… 59 WG-3/4 series ANTI-STATIC GLOVES…………………… 86
POT-21C SOLDER POT [stainless bath]…………… 60 WS-11/12 WRIST STRAPS………………………… 85
POT-23C SOLDER POT [ceramic bath]……………… 60 X
POT-28C SOLDER POT [cast-iron bath]…………… 60
POT-400C SOLDER POT [cast-iron bath]…………… 58 XFC-110 HOT-AIR REWORK STATION……………… 62
POT-50C SOLDER POT [cast-iron bath]…………… 60 XFC-210 HOT-AIR REWORK STATION……………… 62
PX-201 TEMP-CONTROLLED SOLDERING IRON……… 38 XFC-301/300 HOT-AIR REWORK STATIONS……………… 62
PX-335/338/342 FIXED-TEMPERATURE SOLDERING IRONS…… 39 XK-1/2 HANDPIECE HOLDERS…………………… 64
PX-401 TEMP-CONTROLLED SOLDERING IRON……… 38 XPR-1000 PREHEATER…………………………… 65
PX-501AS/501 MINI SOLDERING STATIONS……………… 35 XPR-600 PREHEATER…………………………… 65
PX-601AS/601 SOLDERING CONTROLLERS……………… 35 XPR-610 PREHEATER…………………………… 65
XRB series REBALL KIT…………………………… 70
R XST-80 SOLDERING TWEEZERS………………… 68
R/RD/RB series RED TIPS / BLACK TIPS………………… 49 XST-80G SOLDERING TWEEZERS UNIT……………… 69
XU-1/1S BOARD HOLDERS……………………… 65

SOLDER POTS
RX-701AS/711AS SOLDERING STATIONS…………………… 34
RX-812AS MICRO SOLDRING STATION……………… 18 NEW
Y
RX-802AS SOLDERING STATION…………………… 24
RX-802ASPH NITROGEN SOLDERING STATION…………… 26 YN -10-22 PRECISION NIPPERS…………………… 101
YN-1/3/4 HOBBY HAND TOOLS……………………100

PRODUCTS
SURFACE-MOUNT / SMT
RX-822AS DUAL-PORT SOLDERING STATION………… 20
RX-852AS HIGH-POWER SOLDERING STATION………… 22 YN-104 1.5 mm PLATFORM NIPPERS…………… 102
RX-892AS ULTRA HIGH POWER SOLDERING STATION… 16 NEW YN-10AS/13AS PRECISION NIPPERS…………………… 101
YN-215AS/220AS MANUAL DEPANELING TOOLS……………100
S YN-25AS/26AS/27AS SUPER CUTTERS…………………………100
SA-10 SOLDER ASSIST………………………… 86 YN-300 AIR-POWERED DEPANELING TOOL…………100 NEW

DESOLDERINGS
SE series SPECIAL SPOOL-SOLDERS………………… 93 YP-1/3/4 HOBBY HAND TOOLS……………………100
SF series LEAD-FREE SOLDERS…………………… 93 YP-10 PRECISION NIPPERS…………………… 102
SG series STARTER KIT (ELECTRONICS/CRAFT & HOBBY)… 48 NEW YP-201 CRIMPING PLIERS……………………… 102
SS-60 AIR PURIFYING FUME VACUUM…………… 84 YS-1 WIRE STRIPPER………………………… 103
ST-30/70 TIP CLEANERS………………………… 88 YS-100/101 CABLE STRIPPER……………………… 103
SOLDERING
ACCESSORIES

ST series SOLDERING IRON STANDS……………… 88 YS-2/3 PRECISION WIRE STRIPPER……………… 103

ST-40 TIP CLEANER…………………………… 88
ST-51/52/53 SOLDER REEL HOLDERS………………… 89
ST-80 MINI VISE……………………………… 89
MATERIALS
SOLDERING WORK HEATED TOOLS

ST-91/92/93 MAGNIFIERS…………………………… 89
ST-200 PCB HOLDER…………………………… 40
SVS-500AS SERVICE STATION……………………… 75
SVS-580AS SERVICE STATION……………………… 74
SVS-800AS SERVICE STATION……………………… 72
HAND TOOLS

5
 PRODUCTS POWER CONSUMPTION AND SAFETY STANDARD
MODEL Voltage Power Consumption CE Argentin Australia
CS-21 110 V, 220 V, 240 V 20 W
CS-21/22 220 V 18-19 W ✔
CS-21/24 230-240 V 18-19 W ✔
CS-31 110 V, 120 V, 220 V, 240 V 25 W
CS-31/22 220 V 20-21 W ✔
CS-31/24 230-240 V 20-21 W ✔
CXR-31 110 V, 120 V, 220-230 V 22 W
CXR-31/22 220-230 V 18-19 W ✔
CXR-41 110 V, 120 V, 220-230 V, 240 V 30 W
CXR-41/22 220-230 V 20-21 W ✔
CXR-41/24 230-240 V 20-21 W ✔
110-120 V, 220-240 V 28 W
CXR-60
220-240 V 24-28 W ✔
110-120 V, 220-240 V 32 W
CXR-80
220-240 V 30-34 W ✔
110-120 V, 220-240 V 38 W
CXR-100
220-240 V 37-42 W ✔
HP-150 110 V, 120 V, 220 V, 240 V 110 W
HP-200 110 V, 120 V, 220 V, 240 V 150 W
HP-300 110 V, 120 V, 220 V, 240 V 200 W
110 V,120 V, 220 V 23 W
KS-20R
240 V 19 W
KS-20R/22 220-230 V 23-29 W ✔ ✔
KS-20R/24 230-240 V 18-22 W ✔
KS-30R 110 V, 120 V, 220 V, 240 V 28 W
KS-30R/22 220-230 V 30-33 W ✔ ✔
KS-30R/24 230-240 V 27-30 W ✔
KS-40R 110 V, 120 V, 220 V, 240 V 35 W
KS-40R/22 220-230 V 34-42 W ✔ ✔
KS-40R/24 230-240 V 31-38 W ✔
110 V 37 W
KS-60R
120 V,220 V,240 V 45 W
KS-60R/22 220-230 V 45-54 W ✔ ✔
KS-60R/24 230-240 V 42-49 W ✔
110 V 37 W
KS-80R
120 V,220 V,240 V 45 W
KS-80R/22 220-230 V 45-54 W ✔ ✔
KS-80R/24 230-240 V 42-49 W ✔
110 V 37 W
KS-100R
120 V,220 V,240 V 45 W
KS-100R/22 220-230 V 45-54 W ✔ ✔
KS-100R/24 230-240 V 42-49 W ✔
110 V,120 V, 220 V 23 W
KX-20R
240 V 19 W
KX-20R/22 220-230 V 23-29 W ✔ ✔
KX-20R/24 230-240 V 18-22 W ✔
KX-30R 110 V, 120 V, 220 V, 240 V 28 W
KX-30R/22 220-230 V 30-33 W ✔ ✔
KX-30R/24 230-240 V 27-30 W ✔
KX-40R 110 V, 120 V, 220 V, 240 V 35 W
KX-40R/22 220-230 V 34-42 W ✔ ✔
KX-40R/24 230-240 V 31-38 W ✔
110 V 37 W
KX-60R
120 V,220 V,240 V 45 W
KX-60R/22 220-230 V 45-54 W ✔ ✔
KX-60R/24 230-240 V 42-49 W ✔
110 V 37 W
KX-80R
120 V,220 V,240 V 45 W
KX-80R/22 220-230 V 45-54 W ✔ ✔
KX-80R/24 230-240 V 42-49 W ✔
110 V 37 W
KX-100R
120 V,220 V,240 V 45 W
KX-100R/22 220-230 V 45-54 W ✔ ✔

6
 SYSTEM
SOLDERING
MODEL Voltage Power Consumption CE Argentin Australia
KX-100R/24

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
230-240 V 42-49 W ✔
110 V 50 W
KYP-60
120 V, 220 V, 240 V 60 W
KYP-60/22 220-230 V 56-58 W ✔ ✔
KYP-60/24 230-240 V 59-61 W ✔
110 V 50 W

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

KYP-70
120 V, 220 V, 240 V 60 W
KYP-70/22 220-230 V 56-58 W ✔ ✔
KYP-70/24 230-240 V 59-61 W ✔
6V 6W ✔
MI-6-6 V
5-6 V D.C. 4-6 W ✔
12 V 6W ✔
MI-6-12 V
11-12 V D.C. 5-6 W ✔
POT-21C 110 V, 120 V, 220 V, 240 V 130 W
POT-21C/22 220-230 V 130-142 W ✔
POT-21C/24 230-240 V 120-130 W ✔

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

POT-23C 110 V, 120 V, 220 V, 240 V 130 W
POT-23C/22 220-230 V 130-142 W ✔
POT-23C/24 230-240 V 120-130 W ✔
POT-28C 110 V, 120 V, 220 V, 240 V 130 W
POT-28C/22 220-230 V 130-142 W ✔
POT-28C/24 230-240 V 120-130 W ✔
POT-100C 110 V, 120 V, 220 V, 240 V 440 W
POT-100C/22 220-230 V 390-520 W ✔
POT-100C/24 230-240 V 360-480 W ✔
POT-200C 110 V, 120 V, 220 V, 240 V 650 W
POT-200C/22 220-230 V 690-730 W ✔
POT-200C/24 230-240 V 670-720 W ✔
110-120 V 900 W
POT-103C
220-240 V 900 W ✔
110-120 V 1400 W
POT-203C
220-240 V 1400 W ✔
110-120 V 470-610 W

SOLDER POTS
POT-50C 220-240 V 370-430 W
220-240 V 370-430 W ✔
110-120 V 70 W
PX-201
220-240 V 70 W ✔ ✔

PRODUCTS
SURFACE-MOUNT / SMT
110-120 V 90-130 W
PX-335 220-240 V 85-120 W
220-240 V 85-120 W ✔ ✔
110-120 V 90-130 W
PX-338 220-240 V 75-110 W
220-240 V 75-110 W ✔ ✔

DESOLDERINGS
110-120 V 90-130 W
PX-342 220-240 V 75-110 W
220-240 V 75-110 W ✔ ✔
100-240 V 8W
FD-100
100-240 V 8W ✔
SOLDERING
ACCESSORIES

TM-200 100-240 V ✔
110 V, 120 V, 220 V, 230 V, 240 V 65 W
RX-701AS
220 V, 230 V, 240 V 65 W ✔ ✔ (240 V)
110 V, 120 V, 220 V, 230 V, 240 V 65 W
RX-711AS
220 V, 230 V, 240 V 65 W ✔ ✔ (240 V)
MATERIALS
SOLDERING WORK HEATED TOOLS

RX-802AS / 110 V, 120 V, 220 V, 230 V, 240 V 80 W

RX-802ASPH 220 V, 230 V, 240 V 80 W ✔
110-120 V, 220-240 V 145-170 W
RX-852AS
220-240 V 145-170 W ✔
110-120 V, 220-240 V 220-260 W
RX-822AS
220-240 V 220-260 W ✔
HAND TOOLS

7
 PRODUCTS POWER CONSUMPTION AND SAFETY STANDARD
MODEL Voltage Power Consumption CE Argentin Australia
110 V, 120 V 200 W
SVS-500AS 220-240 V 270-300 W
220-240 V 270-300 W ✔
110-120 V 80 W
TP-100 220-240 V 70-75 W
220-240 V 70-75 W ✔ ✔
110-120 V 80 W
TP-100AS 220-240 V 70-75 W
220-240 V 70-75 W ✔ ✔
110 V, 120 V 130 W
TP-200AS 220-240 V 170-200 W
220-240 V 170-200 W ✔
110-120 V 15/150 W
TQ-77 220-240 V 20/200 W
220-240 V 100-110 W ✔ ✔
110-120 V 15/150 W
TQ-95 220-240 V 20/200 W
220-240 V 100-110 W ✔ ✔
110-120 V 560-650 W
XPR-600 220-240 V 530-630 W
220-240 V 530-630 W ✔

KORIA
MODEL Voltage Power Consumption
CS-21/22 220 V AC 60 Hz 19 W
CS-31/22 220 V AC 60 Hz 21 W
CXR-31 220 V AC 60 Hz 22W
CXR-41 220 V AC 60 Hz 30W
HOT-60R 220 V AC 60 Hz 45 W
KX-40R/22 220 V AC 60 Hz 35 W
KX-60R/22 220 V AC 60 Hz 45 W
PX-201 220 V AC 60 Hz 70 W
RX-701AS 220 V AC 60 Hz 65 W
RX-711AS 220 V AC 60 Hz 65 W
RX-802AS 220 V AC 60 Hz 80 W
RX-802ASPH 220 V AC 60 Hz 80 W
RX-852AS 220 V AC 60 Hz 145 W
SVS-500AS 220 V AC 60 Hz 270 W
TP-100 220 V AC 60 Hz 70 W
TP-100AS 220 V AC 60 Hz 70 W
TP-200AS 220 V AC 60 Hz 170 W
TQ-77 220 V AC 60 Hz 80 W
TQ-95 220 V AC 60 Hz 80 W

8
SOLDERING LEAD-FREE TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER SOLDER POTS SURFACE MOUNT / SMT
SURFACE-MOUNT DESOLDERINGS SOLDERING SOLDERING WORK HEATED TOOLS HAND TOOLS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

99
SYSTEM PRODUCTS ACCESSORIES MATERIALS
SOLDERING STATIONS
FA-1000SL

FA-1000CL
FA-1000SD
FA-1000
FA-1000FD

FA-1000RH
SOLDERING SYSTEM

SOLDER REEL HOLDER

SOLDER FEEDER UNIT
SOLDERING SYSTEM

SOLDERING UNIT
SLIDING UNIT

TIP CLEANER
 SOLDERING SYSTEM
SOLDERING
SYSTEM

Economical
RoHS LEAD
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

Soldering System FREE

SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

Desktop Soldering System

FA-1000
HEAD
Diagonal Driver
Air cylinder drives tip
diagonally. SOLDER REEL
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

HOLDER
Solder Residue
New Tip Release Run Out Function
Function. (PAT.P) After the solder-finish
Only 30 seconds between sensor activates, the
removing and attaching. Easy solder residue in the
and accurate replacement. tube is used up.

V-Groove Function
Reduces solder balls splattering. The V-groove prevents
slips, and supplies stable solder. The short distance from
the tip produces a more accurate feed.
*Please choose the suitable V-groove unit for your solder diameter.

Economical and High

Performance Tip
CONTROL UNIT Compact tip with integrated
Easy Touch Panel heater gives accurate tip
English, Japanese, Chinese and Spanish. te mp e r ature an d b e t te r
running cost (PAT.). In-house
manufacturing for your custom
Memory Card Function (optional)
SOLDER POTS

needs. N 2 gas system also

Multiple uses are easy and copiable by available.
saving the data to the memory card.

Up to 6 Tip Temperature Settings

SURFACE MOUNT / SMT

Different tip temperatures can be set

for each soldering.
PRODUCTS

Tip Temperature Monitor (optional)

Shows analog voltage of 1-5 V of the
tip temperature. Connecting to a data
logger (on the market) helps to control
DESOLDERINGS

the soldering temperature.

*The robot main body is not included. For the robot, please refer to p.12

Better soldering Operator and robot divide the work and operate simultaneously➜High efficiency/Lower costs
ACCESSORIES

operation time and quality

SOLDERING

Does not rely on the operater's soldering skills ➜ High quality solderings
1 tact Manual Soldering
Without robot
SOLDERING WORK

导入前

Detaching 10 mm
Operator Attaching the from jig
MATERIALS

(Manual soldering) Assembling the work work to the jig

Soldering
Operater does all work.

Robot Soldering
HEATED TOOLS

Operator Removing the

Shorter
Attaching the
Operator in charge of Assembling the work work from the
With robot

work to the jig

assembling components. robot

Moving the work

to the robot
机器人
Robot
Robot负责需要焊接能 Soldering
HAND TOOLS

is in charge of
soldering
力的工作 components.

10
 SYSTEM
LEAD-FREE SOLDERING
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
FA-1000 series Units in Standard Configuration
■Soldering Unit ■Solder Feeder Unit ■Control Unit
FA-1000SD (Tip not included) FA-1000FD FA-1000

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

• Easy touch panel
• Memory card function
(optional)
• Tip temperature monitor
(optional)

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

■V-Groove Unit ■Clog-Detection Unit
FA-1000 V FA-1000FDB
Model Solder Dia. Model Solder Dia.
FA-1000V-06 Φ0.6 mm FA-1000FDB-06 Φ0.6 mm
FA-1000V-08 Φ0.8 mm FA-1000FDB-10 Φ0.8 mm Φ1.0 mm
FA-1000V-10 Φ1.0 mm FA-1000FDB-16 Φ1.2 mm Φ1.6 mm
FA-1000V-12 Φ1.2 mm
FA-1000V-16 Φ1.6 mm

■Brush Tip Cleaner ■Air Blow Cleaner ■Solder Reel Holder

FA-1000BC FA-1000CL FA-1000RH
• Solder-Finish
Sensor

SOLDER POTS
To attach Air Blow Tip Cleaner,
you need Fixing Plate for Air Blow
Cleaner.
FA-1000CLP1 : For small robot *Solder not included

PRODUCTS
SURFACE MOUNT / SMT
FA-1000CLP2 : For big robot

Options ■N2 Nozzle ■Diagonal Driver

FA-1000PH FA-1000SL

DESOLDERINGS
Model Compatible Tips Air cylinder drives tip
FA-1000PH-A 1.6SD 3.2SD – – –
FA-1000PH-B 2PC 4C 1.6D 0.8 W 1.2W diagonally
FA-1000PH-C 3PC 2.4D 3.2D 3.2DV –

We have cheape N2 generator. Please refer to p.27

SOLDERING
ACCESSORIES

REPLACEMENT TIPS

FA-10HRT-1.6D FA-10HRT-2.4D FA-10HRT-3.2D FA-10HRT-4C FA-10HRT-0.8W FA-10HRT-1.2W

15
MATERIALS
SOLDERING WORK HEATED TOOLS
2.5
50
50˚

50˚
1.0
0.8

˚
1.2

1.2
0.8
ø4

15 15 (3) ˚
15 30
ø3.2
ø1.6

ø2.4

15 15
FA-10HRT-2PC 2.6
15
70
70

1.8
ø4.2
ø4.2
0.5

˚
˚
2.0

FA-10HRT-1.6SD FA-10HRT-3.2DV FA-10HRT-3.2SD

40˚
2.3

40˚
45˚
50˚
50˚

(2)
60
0.8

1.2
˚
1

(2.
8) FA-10HRT-3PC 6 6
1.8

15
1.4

15 15
3.0
1.0

15
ø3.2

ø3.2
ø1.6

4.0
4.0

HAND TOOLS
45˚

(2.
.75

8)
R0

11
 SOLDERING SYSTEM
SOLDERING
SYSTEM

Sample Robot Configuration

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

• Easy teaching by soldering program. • Possible to adjust positioning by camera. (optional)

• Easy operating Teaching Pendant.
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

4-Axis Sample Robot Configuration 3-Axis Sample Robot Configuration Dual Head Configuration
SPECIFICATIONS
■ Specifications (Control Unit/ Solder Feeder Unit/ Soldering Unit) ■Teaching Pendant
Rated Voltage 110–120 V, 220–240 V AC 50/ 60 Hz
Power Consumption 170–200 W
Dimensions 140（W) x 280（H）x 240（D）mm
Weight 8.6 kg
Control Unit FA-1000
Number of Soldering Programs 256 programs
Tip Temperature Range 50−450˚C
Tip Temperature Preset 6 settings ■Positioning Camera (Optional)
Input Air Pressure 0.4 –0.5 MPa
Solder Feeder Unit FA-1000FD Solder Diameter ø0.6 (ø0.65) ø0.8 ø1.0 ø1.2 ø1.6 mm
Length 145 mm
Soldering Unit FA-1000SD Weight Approx. 950 g (Solder Feeder Unit included)
SOLDER POTS

Heater Voltage/ Power 24 V/ 150 W

■ Specifications (Robot)
Model FA-V2203 FA-V2303 FA-2204N FA-2304N FA-2404N FOR YOUR BETTER
TEMPERATURE CONTROL
SURFACE MOUNT / SMT

Axis Type 3-axis 4-axis

Shape Cantilever type Gate type Cantilever type Gate type Cantilever type SENSOR UNIT TIP THERMOMETER
X, Y -axis 200 × 200 mm 300 × 320 mm 200 × 200 mm 300 × 320 mm 400 × 400 mm TM-100SU p.48 TM-100
PRODUCTS

Operating p.48
Z -axis *Height B 50 mm 100 mm 50 mm 100 mm 150 mm
Range
R -axis – – (-)90−(+)90°
Hight from tip to X Axis stage
88 mm 183 mm 88 mm 183 mm 183 mm
*Height A
DESOLDERINGS

X,Y -axis 500 mm/ s 700 mm/ s 800 mm/ s

Maximum
Z -axis 200 mm/ s 250 mm/ s 320 mm/ s
Speed
R -axis – 600°/ s 800°/ s
X, Y, Z -axis ±0.01 mm ±0.01 mm
Repeatability
R -axis – ±0.008°
Teaching Method Teaching pendant or PC
ACCESSORIES

Program Capacity 255

SOLDERING

Maximum Soldering Points 30,000

10

Diagonal
Driver Stroke
B

Specifications may change without notice. IAI Corp. Desktop robot is also available.
A

X-Axis stage
SOLDERING WORK

REPLACEMENT PARTS / OPTIONS

■Robot Mounting Block Exclusive blocks to mount FA-1000SD, FD to robot.
MATERIALS

■Solder-Nozzle Tube
FA-N Robot Mounting Block FA-V Robot Mounting Block
FA-1000J4BL FA-1000J3BL ø0.6 mm (5 pcs. included) ø0.8 mm (5 pcs. included)
FA-1000N-06 FA-1000N-08
FA-TT, FA-TTA Robot Mounting Block
FA-1000ABL ø1.0 mm (5 pcs. included) ø1.2 mm (5 pcs. included)
HEATED TOOLS

FA-1000N-10 FA-1000N-12
■Teaching Pendant ■PC Software
4-Axis Robot Teaching Pendant ø1.6 mm (5 pcs. included)
PC Software for Robot (Common to 4-Axis and 3-Axis.) FA-1000N-16
FA-JRN-TP FA-JRN-PC
3-Axis Robot Teaching Pendant
FA-JRV-TP
HAND TOOLS

■Air Blow Cleaner Filters ■Brush for Brush Tip Cleaner

Air Blow Filter (10 pcs. included) Brush Cleaner (2 pcs. included)
FA-1000BU FA-1000CLF FA-1000N
FA-1000CLF FA-1000BU

12
 SYSTEM
LEAD-FREE SOLDERING
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
LEAD-FREE TEMPERATURE-CONTROLLED

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

SOLDERING STATIONS
ULTRA HIGH POWER TEMPERATURE RX-892AS
CONTROLLED SOLDERING STATION
TEMPERATURE-CONTROLED LEAD-FREE RX-812AS
MICRO SOLDRING STATION

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

TEMPERATURE-CONTROLED LEAD-FREE RX-822AS
DUAL-PORT SOLDERING STATION
TEMPERATURE-CONTROLED LEAD-FREE RX-852AS
SOLDERING STATIONS RX-802AS
TEMPERATURE-CONTROLED LEAD-FREE RX-802ASPH
NITROGEN SOLDERING STATION
N2 STATION NC-100R
LEAD-FREE AUTOMATIC SOLDER FEEDER FD-110
FD-100

SOLDER POTS
PRODUCTS
SURFACE MOUNT / SMT
SURFACE-MOUNT
SOLDERING DESOLDERINGS
MATERIALS ACCESSORIES
SOLDERING WORK HEATED TOOLS HAND TOOLS

1313
 LEAD-FREE TEMPERATURE-CONTROLLED SOLDERING STATIONS
SOLDERING
SYSTEM

150 W /80 W Dual-port soldering station

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

STANDARD CONFIGURATION Can support micro-soldering iron

RX-822AS 2 soldering irons can be used. 150 W High-heat
capacity Iron Unit
80 W Standard
Iron Unit
Micro-soldering Applicable Iron Unit
RX-81GAS
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

Pictured tips not included. (included) (included) (Sold separately)

p.19
p.16
RX-85GAS RX-80GAS

Can support two 80W iron units Can support hot tweezers
XST-80G (Sold separately)
*Cannot support double 150 W irons.
p.69
RX-80GAS
(Extra RX-80GAS Sold separately)
p.25
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

Applicable tips RX-80HRT series, RX-85H(S)RT series

(Standard Configuration)
REPLACEMENT PARTS/ OPTIONS
Soldering Tester / Tip Thermometer Automatic Solder Feeder Handpiece Grip Rubber (Anti-static) Soldering Iron Stand p.88 Soldering Tweezers Stand
FD-110/100 For quick identification of Sponge/Cleaner ST-28
p.56 p.54
soldering tasks or types.

ST-53SP

RX-80RB : gray
RX-80RB-BK : black p.88
RX-80RB-GR : green
TM-100 TM-200 p.30 RX-80RB-OR : orange ST-40BW

150 W Excellent heat recovery station STANDARD CONFIGURATION Can support micro-soldering iron
RX-852AS 150 W High-heat
capacity Iron Unit
Micro-soldering Applicable Iron Unit
RX-81GAS
Pictured tips not included. (included) (Sold separately)
p.19
p.22
RX-85GAS

Can support 80 W stadnard iron unit Can support hot tweezers

XST-80G (Sold separately)
SOLDER POTS

p.25 p.69
RX-80GAS (Sold separately)
SURFACE MOUNT / SMT

Applicable tips RX-85H(S)RT series

(Standard Configuration)
REPLACEMENT PARTS/ OPTIONS
PRODUCTS

Soldering Tester / Tip Thermometer Automatic Solder Feeder Handpiece Grip Rubber (Anti-static) Soldering Iron Stand p.88 Soldering Tweezers Stand
FD-110/100 For quick identification of Sponge/Cleaner ST-28
p.56 p.54
soldering tasks or types.

ST-53SP
DESOLDERINGS

RX-80RB : gray
RX-80RB-BK : black p.88
RX-80RB-GR : green
TM-100 TM-200 p.30 RX-80RB-OR : orange ST-40BW

500 W Ultra high power soldering station

NEW
ACCESSORIES
SOLDERING

RX-892AS
Pictured tips not included.
p.16
SOLDERING WORK

Great high recovery from world's first high-density 500 W heater in

combination with our original sensitive sensor. We will shock you.
MATERIALS

REPLACEMENT PARTS/ OPTIONS

HEATED TOOLS

Soldering Tester / Tip Thermometer Soldering Iron Stand p.88

p.56 p.54 Sponge/Cleaner

ST-53SP
HAND TOOLS

TM-100 TM-200 ST-40BW

14
 SYSTEM
SOLDERING
80 W Ultimate solution for lead-free soldering

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
STANDARD CONFIGURATION Can support micro-soldering iron
RX-802AS 6 seconds to set temperature. 80 W Standard Iron Unit
(included)
Micro-soldering Applicable Iron Unit
RX-81GAS
(Sold separately)
Pictured tips not included.
p.19
p.24
Can support hot tweezers

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

XST-80G (Sold separately)
RX-80GAS p.69

Applicable tips RX-80HRT series

(Standard Configuration)
REPLACEMENT PARTS/ OPTIONS
Soldering Tester / Tip Thermometer Automatic Solder Feeder Handpiece Grip Rubber (Anti-static) Soldering Iron Stand p.88 Soldering Tweezers Stand
FD-110/100 For quick identification of Sponge/Cleaner ST-28
p.56 p.54
soldering tasks or types.

ST-53SP

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

RX-80RB : gray
RX-80RB-BK : black p.88
RX-80RB-GR : green
TM-100 TM-200 p.30 RX-80RB-OR : orange ST-40BW

Solder or desolder small parts in small space

STANDARD CONFIGURATION Can support 80 W StandardIron Unit
RX-812AS Very thin grip. NEW Micro-soldering Applicable
Iron Unit (included) 80 W Standard Iron Unit
Pictured tips not included. RX-80GAS
(Sold separately)
p.18 p.25

Can support hot tweezers

XST-80G (Sold separately)
p.69
RX-81GAS

SOLDER POTS
Applicable tips RX-81HRT series
(Standard Configuration)
REPLACEMENT PARTS/ OPTIONS
Soldering Tester / Tip Thermometer Handpiece Grip Rubber (Anti-static) Soldering Iron Stand p.88 Soldering Tweezers Stand
For quick identification of Sponge/Cleaner ST-28

PRODUCTS
SURFACE MOUNT / SMT
p.56 p.54
soldering tasks or types.

ST-53SP

RX-80RB : gray
RX-80RB-BK : black p.88
RX-80RB-GR : green
TM-100 TM-200 RX-80RB-OR : orange ST-40BW

DESOLDERINGS
Nitrogen improves solder wetting and fillet shape
STANDARD CONFIGURATION Can support micro-soldering iron
RX-802ASPH Nitrogen improves solder wetting and fillet shape. N 2 Gas Adaptive
Iron Unit
Micro-soldering Applicable Iron Unit
p.19
Pictured tips not included. RX-81GAS
(included) (Sold separately)
A Nitrogen gas generator is required
SOLDERING
ACCESSORIES

cannot be used as a
N2 soldering iron.

p.26 RX-80GASPH

Can support 80W standard Iron Unit Can support hot tweezers
XST-80G (Sold separately)
MATERIALS
SOLDERING WORK HEATED TOOLS

p.25 p.69
RX-80GAS (Sold separately)
cannot be used as a
cannot be used as a N2 soldering iron.
N2 soldering iron.

Applicable tips RX-80HRT-PH series

(Standard Configuration)
REPLACEMENT PARTS/ OPTIONS
Soldering Tester / Tip Thermometer N2 generator Handpiece Grip Rubber (Anti-static) Soldering Iron Stand p.88 Soldering Tweezers Stand
For quick identification of Sponge/Cleaner ST-28
p.56 p.54 soldering tasks or types.

ST-53SP
HAND TOOLS

RX-80RB : gray
p.27 RX-80RB-BK : black p.88
RX-80RB-GR : green
TM-100 TM-200 NC-100R RX-80RB-OR : orange ST-40BW

15
 LEAD-FREE TEMPERATURE-CONTROLLED SOLDERING STATIONS
SOLDERING
SYSTEM

Trouble with heavy-duty

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

and high-capacity parts? RoHS ANTI LEAD

STATIC FREE
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

ULTRA HIGH POWER TEMPERATURE

CONTROLLED SOLDERING STATION NEW
RX-892AS
World-Beating 500 W
World's only 500 W station with digital temperature control
*Based on original research.
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

100 V - 240 V Applicable

Good for many voltages

Shielded boxes and cases Thick cable parts

CALIBRATION SERVICES Tip not included.

We provide calibration and/or
certification for a fee.
SOLDER POTS

Unprecedented Tip-Temperature Recovery Multi-Voltage

Features Accepts 100 V - 240 V. Adaptable and worry-free.
Great high recovery from world’s first high-density 500 W
SURFACE MOUNT / SMT

heater in combination with our original sensitive sensor. Revolutionary Functions

We will shock you! Advanced intelligent features in standard installation.
PRODUCTS

Time to Presolder 22 mm2 Cable

DESOLDERINGS

RX-852AS (Our High Watt Station)

32s

RX-892AS (This Model)

ACCESSORIES
SOLDERING

16s

Grip is Light and Nimble

SOLDERING WORK

90% lighter than standard 500 W sheet metal irons. Light

enough to use on PCBs. Will save your hands from repeti-
MATERIALS

tive strain. Grip does not get too hot, either.

HEATED TOOLS

INCLUDED
Control Unit Iron Unit Soldering Iron Stand
RX-89GAS ST-29
HAND TOOLS

Tip is not included

Brass Wool & Sponges included

16
 SYSTEM
SOLDERING
PRODUCT SPECIFICATIONS / FUNCTIONS

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
TIP-TEMPERATURE RECOVERY FEATURES SOLDERING ALARM FUNCTION (PAT.)
(1) Soldering time countdown (AT )
Five consecutive solderings on 22 mm2 cable starts when the tip is applied to the DIF
Set
temperature

Tip temperatrue
component. (The tip temperature DIF
(˚C)

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

goes outside DIF)
(2) The alarm sounds after the preset
500 AT
countdown. (The display flashes
twice) ① ②③
400 Set at 500°C (3) Operator takes the tip off the com- Power ON Time
ponent.

300

200 KEY LOCK (PAT.) CALIBRATION

Lock with password. No tools or The c alibr ation f unc tion
100 card necessary. digitally offsets the difference
between the tip temperature
with tip RX-89HRT- 15D and the temperature shown by

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

a tip thermometer being used.
0 20 40 60 80 100 (s)

HIGH/LOW TEMPERATURE ALARM SPECIFICATIONS

An alarm sounds when the tem- Model RX-892AS
L H Voltage 100–240 V AC 50/ 60 Hz
perature goes above or below
temperature settings. Power Consumption 560-630 W
High/low setting range 3-100°C. Power Cord Length 1.5 m inlet type
Lower limit Set temperature Upper limit
Temperature Setting Range 50–500°C
Ripple temperature ±5˚C (unloaded)
Insulation Resistance Over 100 MΩ (500 V DC)
INTELLIGENT SLEEP FUNCTION (PAT.) Applicable Iron Units RX-89GAS
Iron Unit (RX-89GAS)
Accessories
Automatically lowers the tem- Soldering Iron Stand (ST-29)
Soldering tip temperatrue

perature when the iron is not in DIF

use, during a preset period of DIF
Set temperature Control Unit
time. Prevents tip oxidation and

SOLDER POTS
Output Voltage 40 V DC
excess heating. Can be used with Sleep start
Operation
CT Dimensions 136 (W) × 240 (H) × 184 (D) mm
Shutdown function.
SST
Weight 4.3 kg
Power ON Time
SLEEP FUNCTION RELEASE (PAT.) Iron Unit

PRODUCTS
SURFACE MOUNT / SMT
Sleep mode can be exited (at any MODE: Sleep function ON/OFF Model RX-89GAS
time) by touching a wet sponge
CT: Sleep start time Iron Unit 500 W Super High-Power Iron Unit
with the tip to cause temperature
SST: Sleep set temperature Voltage / Consumption​ 40 V DC / 500 W
fluctuation. (Effective when tem-
perature is set above 100°C) DIF: Sleep sensitivity Ground Resistance Less than 2 Ω
Each parameter can be set. Cord Length 1.8 m
Length 232 mm (with RX-89HRT-15D)

DESOLDERINGS
Weight 110 g (with RX-89HRT-15D)
SHUTDOWN FUNCTION
*The length does not include the cord bushing. The weight does not include the cord.
Shutdown Function When using together with Sleep function.
For replacement tips, refer to p. 29
Soldering tip temperatrue

DIF
Soldering tip temperatrue

Set temperature DIF

Set temperature
DIF
SOLDERING
ACCESSORIES

DIF
Sleep
Operation Operation setting temp.
SUT Power OFF
Power OFF
CT SUT

Power ON Time Power ON Time

MATERIALS
SOLDERING WORK HEATED TOOLS

When the unit is not used during the preset time, the unit automat-
ically shuts down. Great when you forget to turn the power off.

REPLACEMENT PARTS / OPTIONS

Iron Unit Soldering Iron Stand Sponge Soldering Iron Stand Cleaner
RX-89GAS ST-53SP ST-40BW
HAND TOOLS

Tip is not included (2pcs/set)

17
 LEAD-FREE TEMPERATURE-CONTROLLED SOLDERING STATIONS
SOLDERING
SYSTEM

Solder or desolder small parts

NEW
SOLDERING STATIONS

RoHS ANTI LEAD

SOLDERING STATIONS TEMPERATURE-CONTROLLED

in small spaces. STATIC FREE

SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

TEMPERATURE-CONTROLED LEAD-FREE
MICRO SOLDRING STATION
RX-812AS
RX-812AS package uses Lead-Free
Soldering Station RX-802AS.
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

VERY THIN GRIP

Improved handling and visibility. Tip not included.
CALIBRATION SERVICES
FASTEST IN ITS CLASS We provide calibration and/or
4 seconds to set temperature certification for a fee.
SOLDER POTS

Ergonomic Grip Design

New grip is designed for and adapted to ø2.9 mm superfine
tip.

Fastest in Its Class

SURFACE MOUNT / SMT

Reaches set temperature within 4 seconds after turning power

PRODUCTS

on.
Wide Variety of Replacement Tips
80 W RX-80HRT Tips also available instead of RX-81HRT tip.
DESOLDERINGS

Tip Replacement without Tools (PAT.)

Slide-change tip. Easy to replace a hot tip without any other
tools.
Thick Tip Coating for Lead-free Soldering
ACCESSORIES
SOLDERING

All tips have extra-thick iron plating, to resist erosion by lead-

free solder. HOW TO CHANGE TIPS
Slide the lever in the direction of the arrow. The tip will
come out. Hold and pull the plastic housing of the tip.
SOLDERING WORK

Slide lever
MATERIALS

Tip Hold here

HEATED TOOLS

INCLUDED
Control Unit Iron Unit Soldering Iron Stand
RX-81GAS ST-22
HAND TOOLS

Tip is not included Brass Wool & Sponges included

18
 SYSTEM
SOLDERING
PRODUCT SPECIFICATIONS / FUNCTIONS

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
HEATING SOLDERING ALARM FUNCTION (PAT.)
(1) Soldering time countdown (AT )
RX-812AS reaches 350°C (˚C)
starts when the tip is applied to the
Set
450 DIF temperature
in only 3.7 seconds, and

Tip temperatrue
component. (The tip temperature DIF
450°C in 4.9 seconds. Fast- 4.9 seconds to 450°C

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

goes outside DIF)
350
est heating in its class. (2) The alarm sounds after the preset
3.7seconds to 350°C countdown. (The display flashes
AT

250 twice) ① ②③
(3) Operator takes the tip off the com-
150
2.6 seconds to 250°C ponent.
Power ON Time

50 with tip RX-81HRT- B KEY LOCK CALIBRATION NEW ERGONOMIC

0 5 10 15 20 25 (s)
(PAT.) (PAT.) GRIP (PAT.)
Lock with password. No tools The c alibr ation f unc tion Prevents fatigue. Flexible
or card necessary. digitally offsets the difference cord, and a shorter distance
HIGH/LOW TEMPERATURE ALARM between the tip temperature from the handpiece to the tip.
and the temperature shown by

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

a tip thermometer being used.
An alarm sounds when the tem-
L H
perature goes above or below
temperature settings. SPECIFICATIONS
High/low setting range 3-100°C.
Lower limit Set temperature Upper limit Model RX-812AS
Voltage 110 V, 120 V, 220 V, 230 V, 240 V AC 50/ 60 Hz
Power Consumption 80 W
INTELLIGENT SLEEP FUNCTION (PAT.) Power Cord Length 1.2 m
Temperature Setting Range 50–450°C
Automatically lowers the tem- Ripple temperature ±5˚C (unloaded)
Soldering tip temperatrue

perature when the iron is not in DIF

Insulation Resistance Over 100 MΩ (500 V DC)
use, during a preset period of DIF
Set temperature
Micro-Iron Unit RX-81GAS (included)
time. Prevents tip oxidation and Applicable Iron Units 80 W Iron Unit RX-80GAS (sold separately)
excess heating. Can be used with Operation
Sleep start
Soldering Tweezers Unit XST-80 (sold separately)
CT
Shutdown function. Iron Unit (RX-81GAS)
SST Accessories
Control Unit Soldering Iron Stand (ST-22)
Power ON Time
SLEEP FUNCTION RELEASE (PAT.) Control Unit
Sleep mode can be exited (at any MODE: Sleep function ON/OFF Output Voltage 24 V AC

SOLDER POTS
time) by touching a wet sponge
CT: Sleep start time Dimensions 116 (W) × 105 (H) × 194 (D) mm
with the tip to cause temperature
fluctuation. (Effective when tem- SST: Sleep set temperature Weight 4.8 kg
perature is set above 100°C) DIF: Sleep sensitivity
Iron Unit
Each parameter can be set.
Model RX-81GAS

PRODUCTS
SURFACE MOUNT / SMT
Iron Unit Micro-Iron Unit
SHUTDOWN FUNCTION Voltage / Consumption​ 24 V AC / 72 W
Ground Resistance Less than 2 Ω
Shutdown Function When using together with Sleep function. Leak Voltage Less than 2 mV
Heater Nichrome heater
Soldering tip temperatrue

DIF
Soldering tip temperatrue

DIF
DIF
Set temperature Set temperature Cord Length 1.2 m
DIF

DESOLDERINGS
Length 149 mm (with RX-81HRT-SB)
Sleep
Operation Operation setting temp. Weight 25 g (with RX-81HRT-SB)
SUT Power OFF
Power OFF Equivalent to IPC/EIA J-STD-001C
CT SUT
*The length does not include the cord bushing. The weight does not include the cord.
Power ON Time Power ON Time

For replacement tips, refer to p. 28

SOLDERING
ACCESSORIES

When the unit is not used during the preset time, the unit automat-
ically shuts down. Great when you forget to turn the power off. For Soldering Tweezers XST-80G, refer to p. 69

REPLACEMENT PARTS / OPTIONS

MATERIALS
SOLDERING WORK HEATED TOOLS

Micro Iron Unit 80 W Iron Unit Soldering Iron Stand Sponge Soldering Iron Stand Cleaner
RX-81GAS RX-80GAS ST-53SP ST-40BW

Tip is not included Tip is not included (2pcs/set)

Accessories HANDPIECE GRIP RUBBER (Anti-static)

For quick identification of soldering tasks or types.
RX-80RB : gray RX-80RB-GR : green
HAND TOOLS

RX-80RB-BK : black RX-80RB-OR : orange

Applicable Iron Unit : RX-80GAS/ RX-85GAS/ RX-81GAS with RX-80RB

19
 LEAD-FREE TEMPERATURE-CONTROLLED SOLDERING STATIONS
SOLDERING
SYSTEM

2 soldering irons can be used.

SOLDERING STATIONS

RoHS ANTI LEAD

SOLDERING STATIONS TEMPERATURE-CONTROLLED

STATIC FREE
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

TEMPERATURE-CONTROLLED, LEAD-FREE,
DUAL-PORT SOLDERING STATION
RX-822AS
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

CALIBRATION SERVICES
New Soldering Iron Stand We provide calibration and/or
More stable, better operation certification for a fee.
Tips not included.
SOLDER POTS

2 Soldering Irons can Be Used Easy-to-Use Handpiece (PAT.)

Can be prepared with 2 soldering irons. Allows different types Easy to replace a hot tip without any other tools. Good for long
of work [such as micro soldering / high power work (150 W)] at hours of work with light, well-insulated structure.
the same time. Two RX-85GAS (150 W) irons cannot be used together.
SURFACE MOUNT / SMT

Wide Variety of Tips

Individual Tempera- More than 40 tips are available.
ture Setting
PRODUCTS

Independent displays make

settings clear.
DESOLDERINGS

HOW TO CHANGE TIPS

Enables Reworking of
Slide the lever in the direction of the arrow. The tip will
Chip Parts
come out. Hold and pull the plastic housing of the tip.
Allows you to rework chip
Slide lever
ACCESSORIES

parts using 2 tips at a time.

SOLDERING

Advanced Functions
(PAT.) Tip
Hold here
SOLDERING WORK

Equipped with intelligent functions (sleep, sleep release, shut-

down and Key lock) based on the RX-802AS.
MATERIALS
HEATED TOOLS

INCLUDED
Control Unit Iron Unit 1 Iron Unit 2 Soldering Iron Stands
RX-85GAS RX-80GAS ST-22
HAND TOOLS

Tip is not included Tip is not included Brass Wool & Sponges included

20
 SYSTEM
SOLDERING
PRODUCT SPECIFICATIONS / FUNCTIONS

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
TIP-TEMPERATURE RECOVERY FEATURES KEY LOCK CALIBRATION NEW ERGONOMIC
(PAT.) (PAT.) GRIP (PAT.)
TIP1 TIP2 Lock with password. No tools The c alibr ation f unc tion Prevents fatigue. Flexible
(˚C) (˚C) (˚C) or card necessary. digitally offsets the difference cord, and a shorter distance
350 350 350
between the tip temperature from the handpiece to the tip.

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

250 250 250
and the temperature shown by
Operation Operation Operation Operation
a tip thermometer being used.
150 With RX-85HRT-5D 150 With RX-80HRT-5.4D 150

50 50 50 SPECIFICATIONS
4 6 8 10 12 14 (min.) 0 2 4 6 8 10 12 14 (min.) 0 2 4 6 8 10 12 14 (min.) 0 2 4 6 8 10 12 14 (min.)

Model RX-822AS
A generous amount of lead-free solder on a land of 20 mm dia. Voltage 110–120 V, 220–240 V AC 50/ 60 Hz
dissolving 35 points in succession at 350˚C. Power Consumption 220–260 W
Power Cord Length 1.5 m inlet type
HIGH/LOW TEMPERATURE ALARM Temperature Setting Range 50–450°C
Insulation Resistance Over 100 MΩ (500 V DC)
An alarm sounds when the tem- Ripple temperature ± 5˚C (unloaded)

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

perature goes above or below L H 150 W High-heat-capacity Iron Unit *RX-85GAS (included)
temperature settings. 80 W Standard Iron Unit RX-80GAS (included)
Applicable Iron Units
High/low setting range 3-100°C. Micro-Iron Unit RX-81GAS (sold separately)
Lower limit Set temperature Upper limit Soldering Tweezers Unit XST-80 (sold separately)
Iron Unit (RX-85GAS, RX-80GAS)
Accessories
Soldering Iron Stand (ST-22) × 2
INTELLIGENT SLEEP FUNCTION (PAT.)
*Two RX-85GAS (150 W) irons cannot be used together.
Automatically lowers the tem-
Soldering tip temperatrue

perature when the iron is not in DIF Control Unit

use, during a preset period of DIF
Set temperature

time. Prevents tip oxidation and Output Voltage 24 V AC

excess heating. Can be used with Operation
Sleep start Dimensions 116 (W) × 105 (H) × 194 (D) mm
CT
Shutdown function. Weight 4.9 kg
SST

Power ON Time Iron Unit

SLEEP FUNCTION RELEASE (PAT.)
Sleep mode can be exited (at any
Model RX-80GAS RX-85GAS
MODE: Sleep function ON/OFF Iron Unit 80 W Standard Iron Unit 150 W High-heat-capacity Iron Unit
time) by touching a wet sponge
CT: Sleep start time Voltage/Consumption 24 V AC / 72W 24 V AC / 72 W·150 W

SOLDER POTS
with the tip to cause temperature
fluctuation. (Effective when tem- SST: Sleep set temperature Ground Resistance Less than 2 Ω
perature is set above 100°C) DIF: Sleep sensitivity Leak Voltage Less than 2 mV
Each parameter can be set. Heater Nichrome heater
Cord Length 1.2 m 1.5 m

PRODUCTS
SURFACE MOUNT / SMT
Length 158 mm(with RX-80HRT-B) 174 mm(withRX-85HRT-5D)
SHUTDOWN FUNCTION Weight 28 g (with RX-80HRT-B) 39 g (with RX-85HRT-5D)
Equivalent to IPC/EIA J-STD-001C
Shutdown Function When used together with Sleep function.
*The length does not include the cord bushing. The weight does not include the cord.
Soldering tip temperatrue

DIF
Soldering tip temperatrue

Set temperature DIF

Set temperature
DIF DIF
For replacement tips, refer to p. 28 & p. 29

DESOLDERINGS
Sleep
Operation Operation setting temp.
SUT Power OFF
Power OFF
For Soldering Tweezers XST-80G, refer to p. 69
CT SUT

Power ON Time Power ON Time

When the unit is not used during the preset time, the unit automati-
cally shuts down. Great when you forget to turn the power off.
SOLDERING
ACCESSORIES

REPLACEMENT PARTS / OPTIONS

MATERIALS
SOLDERING WORK HEATED TOOLS

RX-852AS Iron Unit RX-802AS Iron Unit RX-812AS Iron Unit Soldering Iron Stand Sponge Soldering Iron Stand Cleaner Flux Guard Rubber
RX-85GAS RX-80GAS RX-81GAS ST-53SP ST-40BW RX-80P

Tip is not included Tip is not included Tip is not included (2pcs/set)

Accessories HANDPIECE GRIP RUBBER (Anti-static)

For quick identification of soldering tasks or types.
RX-80RB : gray RX-80RB-GR : green
HAND TOOLS

RX-80RB-BK : black RX-80RB-OR : orange

Applicable Iron Unit : RX-80GAS/ RX-85GAS/ RX-81GAS with RX-80P with RX-80RB

21
 LEAD-FREE TEMPERATURE-CONTROLLED SOLDERING STATIONS
SOLDERING
SYSTEM

Phenomenal heat recovery with 150 W

RoHS ANTI LEAD
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

compact high-output heater. STATIC FREE

SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

TEMPERATURE-CONTROLLED
LEAD-FREE SOLDERING STATION
RX-852AS
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

Tip not included.

CALIBRATION SERVICES
New Soldering Iron Stand We provide calibration and/or
More stable, better operation certification for a fee.
SOLDER POTS

Excellent Heat Recovery (PAT.) Thick Tip Coating for Lead-free Soldering
Excellent heat recovery has All tips have extra-thick iron plating, to resist erosion by
Up to 22 mm² copper wire can been achieved by combining lead-free solder.
SURFACE MOUNT / SMT

be soldered.
a 150 W compact high-output
RX-80HRT Tips also Available
PRODUCTS

heater with a high-sensitivity

More than 40 tips are
sensor. Slim tips now added to line-up.
available, including the
RX-80HRT tips.
DESOLDERINGS

Fastest in Its Class

Reaches 350°C in only 14 seconds. (Only 6 seconds when
using RX-80HRT tips.)
Light and Compact Handpiece
ACCESSORIES
SOLDERING

Same size as the RX-80GAS.

HOW TO CHANGE TIPS
Tip Replacement without Tools (PAT.) Slide the lever in the direction of the arrow. The tip will
Slide-change tip. Easy to replace a hot tip without any come out. Hold and pull the plastic housing of the tip.
SOLDERING WORK

other tools.
Slide lever
MATERIALS

Tip
Hold here
HEATED TOOLS

INCLUDED
Control Unit Iron Unit RX-85GAS Soldering Iron Stand
ST-22
HAND TOOLS

Tip is not included Brass Wool & Sponges included

22
 SYSTEM
SOLDERING
PRODUCT SPECIFICATIONS / FUNCTIONS

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
TIP-TEMPERATURE RECOVERY FEATURES SOLDERING ALARM FUNCTION (PAT.)

Soldering efficiency increased by 39%! (1) Soldering time countdown (AT )

starts when the tip is applied to the DIF
Set
temperature

Tip temperatrue
400 400 component. (The tip temperature DIF

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

goes outside DIF)
300 300
(2) The alarm sounds after the preset
AT
Tip Temperature Stability Tip Temperature Stability countdown. (The display flashes
200 200
RX-802AS RX-852AS twice) ① ②③
Amount of time required : Amount of time required :

7min.20s.
(3) Operator takes the tip off the com-
100

(˚C)
10min.10s. 100

(˚C)
ponent.
Power ON Time

0 2 4 6 8 10 12 14 0 2 4 6 8 10 12 14
(min.) (min.)
KEY LOCK CALIBRATION NEW ERGONOMIC
A generous amount of lead-free solder on Shortens soldering time significantly, and
a land of 20 mm dia. dissolving 35 points in the tip temperature is more stable.
(PAT.) (PAT.) GRIP (PAT.)
succession at 350˚C. Lock with password. No tools The c alibr ation f unc tion Prevents fatigue. Flexible
or card necessary. digitally offsets the difference cord, and a shorter distance
HIGH/LOW TEMPERATURE ALARM between the tip temperature from the handpiece to the tip.
and the temperature shown by

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

a tip thermometer being used.
An alarm sounds when the tem-
L H
perature goes above or below
temperature settings. SPECIFICATIONS
High/low setting range 3-100°C.
Lower limit Set temperature Upper limit Model RX-852AS
Voltage 110–120 V, 220–240 V AC 50/ 60 Hz
Power Consumption 145–170 W
INTELLIGENT SLEEP FUNCTION (PAT.) Power Cord Length 1.5 m inlet type
Temperature Setting Range 50–450°C
Automatically lowers the tem- Ripple temperature ±5˚C (unloaded)
Soldering tip temperatrue

perature when the iron is not in Insulation Resistance Over 100 MΩ (500 V DC)
DIF
use, during a preset period of DIF
Set temperature 150 W High-heat-capacity Iron Unit RX-85GAS (included)
time. Prevents tip oxidation and 80 W Standard Iron Unit RX-80GAS (sold separately)
excess heating. Can be used with Sleep start Applicable Iron Units
Operation
CT
Micro-Iron Unit RX-81GAS (sold separately)
Shutdown function. Soldering Tweezers Unit XST-80 (sold separately)
SST
Iron Unit (RX-85GAS)
Power ON Time Accessories
SLEEP FUNCTION RELEASE (PAT.) Soldering Iron Stand (ST-22)
Sleep mode can be exited (at any MODE: Sleep function ON/OFF Control Unit

SOLDER POTS
time) by touching a wet sponge Output Voltage 24 V AC
CT: Sleep start time
with the tip to cause temperature Dimensions 116 (W) × 105 (H) × 194 (D) mm
fluctuation. (Effective when tem- SST: Sleep set temperature
DIF: Sleep sensitivity Weight 4.8 kg
perature is set above 100°C)
Each parameter can be set. Iron Unit

PRODUCTS
SURFACE MOUNT / SMT
Model RX-85GAS
SHUTDOWN FUNCTION Iron Unit 150 W High-heat-capacity Iron Unit
Voltage/Consumption 24 V AC / 150 W
Shutdown Function When using together with Sleep function. Ground Resistance Less than 2 Ω
Leak Voltage Less than 2 mV
Soldering tip temperatrue

DIF
Soldering tip temperatrue

DIF
DIF
Set temperature Set temperature Heater Nichrome heater
DIF

DESOLDERINGS
Cord Length 1.5 m
Sleep
Operation Operation setting temp. Length 174 mm(with RX-85HRT-5D)
SUT Power OFF
Power OFF Weight 39 g (with RX-85HRT-5D)
CT SUT Equivalent to IPC/EIA J-STD-001C
Power ON Time Power ON Time *The length does not include the cord bushing. The weight does not include the cord.

For replacement tips, refer to p. 28 & p. 29

SOLDERING
ACCESSORIES

When the unit is not used during the preset time, the unit automat-
ically shuts down. Great when you forget to turn the power off.
For Soldering Tweezers XST-80G, refer to p. 69

REPLACEMENT PARTS / OPTIONS

MATERIALS
SOLDERING WORK HEATED TOOLS

RX-852AS Iron Unit RX-802AS Iron Unit RX-812AS Iron Unit Soldering Iron Stand Sponge Soldering Iron Stand Cleaner Flux Guard Rubber
RX-85GAS RX-80GAS RX-81GAS ST-53SP ST-40BW RX-80P

Tip is not included Tip is not included Tip is not included (2pcs/set)

Accessories HANDPIECE GRIP RUBBER (Anti-static)

For quick identification of soldering tasks or types.
RX-80RB : gray RX-80RB-GR : green
HAND TOOLS

RX-80RB-BK : black RX-80RB-OR : orange

Applicable Iron Unit : RX-80GAS/ RX-85GAS/ RX-81GAS with RX-80P with RX-80RB

23
 LEAD-FREE TEMPERATURE-CONTROLLED SOLDERING STATIONS
SOLDERING
SYSTEM

6 seconds to set temperature.

RoHS ANTI LEAD
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

The ultimate solution for lead-free soldering. STATIC FREE

SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

TEMPERATURE-CONTROLLED LEAD-FREE SOLDERING STATION

RX-802AS
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

Tip not included.

CALIBRATION SERVICES
New Soldering Iron Stand We provide calibration and/or
More stable, better operation certification for a fee.
SOLDER POTS

Excellent Heat Recovery (PAT.) Thick Tip Coating for Lead-free Soldering
There is almost no temperature fluctuation during continuous All tips have extra-thick iron plating, to resist erosion by lead-
operation. Good for lead-free soldering. free solder.
SURFACE MOUNT / SMT

Fastest in Its Class

PRODUCTS

Reaches set temperature in just 6 seconds after turning power HOW TO CHANGE TIPS
on. Slide the lever in the direction of the arrow. The tip will
Tip Replacement without Tools (PAT.) come out. Hold and pull the plastic housing of the tip.
DESOLDERINGS

Slide-change tip. Easy to replace a hot tip without any other Slide lever

tools.
Reduced Grip Heat (PAT.) Tip
Hold here
Patented thermal-insulation grip permits comfortable and safe
ACCESSORIES
SOLDERING

work.
SOLDERING WORK
MATERIALS
HEATED TOOLS

INCLUDED
Control Unit Iron Unit Soldering Iron Stand
RX-80GAS ST-22
HAND TOOLS

Tip is not included Brass Wool & Sponges included

24
 SYSTEM
SOLDERING
PRODUCT SPECIFICATIONS / FUNCTIONS

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
TIP-TEMPERATURE RECOVERY FEATURES SOLDERING ALARM FUNCTION (PAT.)
The tip temperature (˚C) (1) Soldering time countdown (AT )
400 Set
remains close to set During work starts when the tip is applied to the DIF temperature

Tip temperatrue
temperature even during
350 component. (The tip temperature DIF

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

300 goes outside DIF)
heavy load work. Even during continuous heavy load work
250 the temperature of the soldering iron tip (2) The alarm sounds after the preset
AT
remains close to the set temperature. countdown. (The display flashes
200
twice) ① ②③
150
(3) Operator takes the tip off the com- Power ON Time
100 ponent.
50

0 50 100 150 200 250 300 (sec.)

KEY LOCK CALIBRATION NEW ERGONOMIC
(PAT.) (PAT.) GRIP (PAT.)
HIGH/LOW TEMPERATURE ALARM Lock with password. No tools The c alibr ation f unc tion Prevents fatigue. Flexible
or card necessary. digitally offsets the difference cord, and a shorter distance
An alarm sounds when the tem- between the tip temperature from the handpiece to the tip.
L H and the temperature shown by

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

perature goes above or below
a tip thermometer being used.
temperature settings.
High/low setting range 3-100°C.
Lower limit Set temperature Upper limit SPECIFICATIONS
Model RX-802AS
INTELLIGENT SLEEP FUNCTION (PAT.) Voltage 110 V, 120 V, 220 V, 230 V, 240 V AC 50/ 60 Hz
Power Consumption 80 W
Automatically lowers the tem- Power Cord Length 1.2 m inlet type
Soldering tip temperatrue

perature when the iron is not in DIF

Temperature Setting Range 50–450°C
use, during a preset period of DIF
Set temperature
Ripple temperature ±5˚C (unloaded)
time. Prevents tip oxidation and Insulation Resistance Over 100 MΩ (500 V DC)
excess heating. Can be used with Operation
Sleep start
80 W Standard Iron Unit RX-80GAS (included)
CT
Shutdown function. Applicable Iron Units Micro-Iron Unit RX-81GAS (sold separately)
SST
Soldering Tweezers Unit XST-80 (sold separately)
Power ON Time
SLEEP FUNCTION RELEASE (PAT.) Accessories
Iron Unit (RX-80GAS)
Sleep mode can be exited (at any Soldering Iron Stand (ST-22)
MODE: Sleep function ON/OFF
time) by touching a wet sponge Control Unit
CT: Sleep start time
with the tip to cause temperature

SOLDER POTS
fluctuation. (Effective when tem- SST: Sleep set temperature Output Voltage 24 V AC
perature is set above 100°C) DIF: Sleep sensitivity Dimensions 115 (W) × 98 (H) × 146 (D) mm
Each parameter can be set. Weight 1.8 kg
Iron Unit

PRODUCTS
SURFACE MOUNT / SMT
SHUTDOWN FUNCTION Model RX-80GAS
Iron Unit 80 W Standard Iron Unit RX-80GAS
Voltage/Consumption 24 V AC / 72 W
Shutdown Function When using together with Sleep function. Ground Resistance Less than 2 Ω
Leak Voltage Less than 2 mV
Soldering tip temperatrue

DIF
Soldering tip temperatrue

Set temperature DIF

DIF DIF
Set temperature
Heater Nichrome heater
Cord Length 1.2 m

DESOLDERINGS
Sleep
setting temp.
Operation
SUT Power OFF
Operation
Length 158 mm (with RX-80HRT-BM)
Power OFF
Weight 28 g (with RX-80HRT-BM)
CT SUT
Equivalent to IPC/EIA J-STD-001C
Power ON Time Power ON Time
*The length does not include the cord bushing. The weight does not include the cord.

When the unit is not used during the preset time, the unit automati- For replacement tips, refer to p. 28
cally shuts down. Great when you forget to turn the power off.
SOLDERING
ACCESSORIES

For Soldering Tweezers XST-80G, refer to p. 69

REPLACEMENT PARTS / OPTIONS

MATERIALS
SOLDERING WORK HEATED TOOLS

RX-802AS Iron Unit RX-812AS Iron Unit Soldering Iron Stand Sponge Soldering Iron Stand Cleaner Flux Guard Rubber
RX-80GAS RX-81GAS ST-53SP ST-40BW RX-80P

Tip is not included Tip is not included (2pcs/set)

Accessories HANDPIECE GRIP RUBBER (Anti-static)

For quick identification of soldering tasks or types.
RX-80RB : gray RX-80RB-GR : green
HAND TOOLS

RX-80RB-BK : black RX-80RB-OR : orange

Applicable Iron Unit : RX-80GAS/ RX-85GAS/ RX-81GAS with RX-80P with RX-80RB

25
 LEAD-FREE TEMPERATURE-CONTROLLED SOLDERING STATIONS
SOLDERING
SYSTEM

Nitrogen improves solder wetting NOTE Preheat effect cannot be achieved by the
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

and fillet shape. RX-802ASPH alone. A Nitrogen gas generator is

required. We recommend our NC-100R N2 station.
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

TEMPERATURE-CONTROLLED
LEAD-FREE NITROGEN SOLDERING STATION
RX-802ASPH
RoHS ANTI LEAD
STATIC FREE
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

Tip not included.

CALIBRATION SERVICES
New Soldering Iron Stand
More stable, better operation We provide calibration and/or
certification for a fee.
SOLDER POTS

All-in-one N2 Nozzle Tips (PAT.) IMPROVING LEAD-FREE Normal soldering iron

Each RX-80HRT tip is equipped with a slim SOLDERING
SURFACE MOUNT / SMT

N2 nozzle. Advantages of the Preheat Effect

● Allows you to use lead-free solder
Slim N2 Nozzles
PRODUCTS

(which has a high melting point) at a A tip alone heats only the
φ6.4 mm slim N2 nozzles. Get into small spaces easily. temperature close to that of a Eutectic solder joint area, so the PCB
drains the heat. Solder wet-
Sn-Pb tip.
Light and Easy-to-use Handpiece ting may also be poor.
● Minimal tip temperature reduction
DESOLDERINGS

Handpiece weighs only 33 g. So light it’s hard to believe it’s for shortens soldering time significantly. Nitrogen soldering iron
a Nitrogen station! ● Reduces splashing or component
damage by heat shock.
Flexible N2 Induction Tube
Super-flexible. Allows free maneuvering of handpiece. Advantages of Preheating with Nitrogen
Nitrogen preheats the whole
● Reduces oxidation of the solder area
ACCESSORIES

Special Tool for Easy Tip Replacement soldering area. This is particu-
SOLDERING

and the tip. larly effective on a multi-lay-

Comes with a handy tool to change a hot tip easily. ered PCB copper pattern.
● Improves solder wetting and fillet Better solder wetting.
shape.
SOLDERING WORK
MATERIALS
HEATED TOOLS

INCLUDED
Control Unit Iron Unit Soldering Iron Stand Tip changing tool
RX-80GASPH ST-22 RX-80PHC
HAND TOOLS

Tip is not included Brass Wool & Sponges included

26
 SYSTEM
SOLDERING
PRODUCT SPECIFICATIONS / FUNCTIONS

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
Control Unit
SPECIFICATIONS
Output Voltage 24 V AC
Model RX-802ASPH Dimensions 115 (W) × 98 (H) × 146 (D) mm
Voltage 110 V, 120 V, 220 V, 230 V, 240 V AC 50/ 60 Hz Weight 1.8 kg
Power Consumption 80 W Iron Unit

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

Power Cord Length 1.2 m inlet type
Temperature Setting Range 50–450°C Model RX-80GASPH
Ripple temperature ±5˚C (unloaded) Iron Unit N2 Gas Adaptive Iron Unit
Insulation Resistance Over 100 MΩ (500 V DC) Voltage/Consumption 24 V AC / 72 W
N2 Gas Adaptive Iron Unit RX-80GASPH (included) Ground Resistance Less than 2 Ω
Applicable Iron Units 80 W Standard Iron Unit *RX-80GAS (sold separately) Leak Voltage Less than 2 mV
*Non-N2, also supported. Micro-Iron Unit *RX-81GAS (sold separately) Heater Nichrome heater
Soldering Tweezers Unit *XST-80 (sold separately) Gas Supply Pressure 0.2M Pa (2 kgf/ cm2)
Iron Unit (RX-80GASPH) Cord Length 1.2 m
Accessories Length 158 mm (with RX-80HRT-PHB)
Soldering Iron Stand (ST-22)
Weight 33 g (with RX-80HRT-PHB)
Equivalent to IPC/EIA J-STD-001C
For basic performance, please refer to RX-802AS, page 16.

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

*The length does not include the cord bushing. The weight does not include the cord.
​The Iron Unit ​RX-80GAS/ RX-81GAS/ XST-80G cannot be used
as a N2 soldering iron. For replacement tips, refer to p. 28

For Soldering Tweezers XST-80G, refer to p. 69

REPLACEMENT PARTS / OPTIONS

RX-802AS Iron Unit RX-802AS Iron Unit RX-812AS Iron Unit N2 O-ring Tip changing tool Soldering Iron Stand Sponge Soldering Iron Stand Cleaner
RX-80PHP RX-80GAS RX-81GAS RX-80PHP RX-80PHC ST-53SP ST-40BW
Tip is not included Tip is not included Tip is not included (2pcs./set)

Non-N2, also supported Non-N2, also supported

A compact N2 station combining NITROGEN GENERATION DENSITY

SOLDER POTS
N2 generator and controller. (According to in-house The relation between Nitrogen density,
measuring method) flow rate, and input air pressure
N2 STATION 100
RoHS ANTI
NC-100R STATIC

PRODUCTS
SURFACE MOUNT / SMT
Nitrogen density [%]

95
The special separation mem-
brane separates the nitrogen 90
from the compressed air pro-
duced by a compressor.
85
Maintains a stable output 0.3[MPa]

DESOLDERINGS
pressure(0.2Mpa). Two-tiered 80 0.5[MPa]
setting with RX-802ASPH 0.7[MPa]
achieves ef ficient work in
75
smaller space. 0.5 1 1.5 2.0 2.5 3.0 3.5 4.0
Flow rate [L / min]

L/min
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
SOLDERING
ACCESSORIES

MPa

0.3 98.7 96.6 94.5 92.0 90.8 89.7 88.5 87.5

0.5 99.8 99.2 98.0 96.8 95.7 94.8 93.8 92.6
0.7 99.9 99.7 99.2 98.3 97.7 97.1 96.3 95.4
An example of measured values
SPECIFICATIONS
MATERIALS
SOLDERING WORK HEATED TOOLS

Model NC-100R
■SET-UP EXAMPLE
RX-802ASPH + NC-100R
Input pressure 0.3−0.7 MPa
Input temperature 5−50˚C
Nitrogen generation Maximum 99.5% (0.7 MPa, 0.5L / min)
density
Recommended Nitrogen
1.0L / min
generation flow rate
Flow meter 0.5-4.0L / min
118 (W) × 112 (H) × 185 (D) mm
Dimensions
(not including protruding parts)
Weight 2kg
HAND TOOLS

Input: Outer diameter ø6 mm

Required Hose Dimension
Output : Outer diameter ø4 mm

27
 LEAD-FREE TEMPERATURE-CONTROLLED SOLDERING STATIONS
SOLDERING
SYSTEM

NEW
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

RX-81HRT Series / Applicable Iron Unit (Micro-Soldering Applicabe Iron Unit)

Station RX-822AS RX-852AS RX-802AS RX-802ASPH RX-812AS 25
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

Applicable Iron RX-80GAS RX-85GAS

RX-80GAS *RX-80GAS RX-81GAS
RoHS

φ2.9
Unit RX-85GAS *RX-80GAS
*RX-81GAS *RX-81GAS *RX-80GAS
( *Sold separately) *RX-81GAS *RX-81GAS

RX-81HRT-B RX-81HRT-SB RX-81HRT-0.6C RX-81HRT-0.5D RX-81HRT-SBJ RX-81HRT-1.5K

6 5.5
6 6 6

φ0.5
0.2

0.6
6

φ1

φ1.5
4.5
2

60
2
2

φ1
2. 2

φ1
2 4
φ1
2.

˚
φ
φ

30˚
.1
2

2
5

2.
R0

45˚
.2

2.

φ
φ
R0
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

RX-80HRT Series / Applicable Iron Unit (80 W Standard Iron Unit)

Station RX-822AS RX-852AS RX-802AS RX-802ASPH RX-812AS 34.5
Applicable Iron RX-80GAS RX-85GAS
RoHS

φ5.4
RX-80GAS *RX-80GAS RX-81GAS
Unit RX-85GAS *RX-80GAS
*RX-81GAS *RX-81GAS *RX-80GAS
( *Sold separately) *RX-81GAS *RX-81GAS

RX-80HRT-B RX-80HRT-2B RX-80HRT-SB RX-80HRT-LB RX-80HRT-LBJ RX-80HRT-BM

RX-80HRT-LB ¥1,575 (税別¥1,500)

8.5 10 12.7 8.5

9 12
4.4

7
4.5
7

3 2.5 5

7
4.
4.

4.
φ
7
φ

4.
4.

φ
φ
φ

.6

.3
.3

30˚
5

.3
R0

R0
.1
R0

R0
5
R0

RX-80HRT-1BC RX-80HRT-2.3BC RX-80HRT-3BC RX-80HRT-0.5C RX-80HRT-1C RX-80HRT-2C

° 8 ° 10 10 ° 9 ° 10 ° 11.5
45 45 60 60 45
7

7
7

3.6

7
3.5 5 3 5
4.

4.

4.
7

4.

4.
φ
4.

φ
φ

φ
φ

0.5
1

1
45˚
2.3

φ2
RX-80HRT-2CF RX-80HRT-2CD RX-80HRT-3C RX-80HRT-3CF RX-80HRT-3CD RX-80HRT-4C
11.5 ° 11.5
11.5 ° 12
45
° 11.5 45 45
5° 11.5 6

7
5.5 4

4.
7
7

φ3
φ2

4.

7
4.

φ
4.
φ
φ

φ
2

45˚
2
1.

45˚
SOLDER POTS

φ4
φ3

2
φ3

3
φ2

RX-80HRT-4.7C RX-80HRT-0.8D RX-80HRT-1.2D RX-80HRT-1.6D RX-80HRT-2.4D RX-80HRT-3.2D

° 8.5 10 10 10 10 10
45
7

7
7

7
7

0.5
4.

0.4 0.4 0.5 0.5

4.

5
4.

4.
3
4.

3 5 6 6.5
φ

φ
φ

φ
φ
SURFACE MOUNT / SMT

φ4.7

φ2.4

φ3.2
φ1.6
φ1.2
φ0.8

3.2 4.5 5.4

PRODUCTS

RX-80HRT-5.4D RX-80HRT-3K RX-80HRT-4.5K RX-80HRT-4.5KH RX-80HRT-5.5K

5.7
90

76
60

60

10.5
˚

1 10.5
˚

10.5
˚

1.2 10 10
7.4 10
7
4.
φ

φ5.5

2
DESOLDERINGS

φ5.4

φ4.7
φ4.5

1.2
45˚ 45˚ 45˚
φ3

2.5 45˚

RX-85HRT Series / Applicable Iron Unit (150 W High-heat-capacity Iron Unit)

47
Station
ACCESSORIES

RX-822AS RX-852AS RX-802AS RX-802ASPH RX-812AS

SOLDERING

RoHS
9.7

Applicable Iron
Unit
RX-85GAS RX-85GAS — — —

RX-85HRT-B RX-85HRT-2BC RX-85HRT-3BC RX-85HRT-5BC RX-85HRT-7BC RX-85HRT-3D

SOLDERING WORK

11.5 11.5 11.5

11.5 11.5 11.5
5 6 8 5
3

5
2

4
5
3
MATERIALS

45° 45° °
0.

° 45
45 1.5
R

RX-85HRT-5D RX-85HRT-7D RX-85HRT-6K

11.5
90

11.5
HEATED TOOLS

14
˚
5

7.5
7

8.2
6

°
1.5 45
1.5 3
HAND TOOLS

28
 SYSTEM
SOLDERING
RX-85HSRT Series / Applicable Iron Unit (150 W High-heat-capacity Iron Unit)

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
49
Station RX-822AS RX-852AS RX-802AS RX-802ASPH RX-812AS
RoHS

8.0
Applicable Iron
Unit
RX-85GAS RX-85GAS — — —

RX-85HSRT-B RX-85HSRT-2BC RX-85HSRT-3BC RX-85HSRT-1.6D RX-85HSRT-2.4D RX-85HSRT-3.2D

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

11.5 11.5 11.5 11.5
11.5 11.5

2.4

3.2
5

1.6
5 6 6
5 5

3
2

0.8
45°
.3

45° 0.8 0.8

R0

RX-85HSRT-4.5K
90

14
˚
4.5

2.5 °
45

RX-80HRT-PH Series / Applicable Iron Unit (Micro-Soldering Applicabe Iron Unit)

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

94
Station RX-822AS RX-852AS RX-802AS RX-802ASPH RX-812AS

6.4
34
Applicable Iron
Unit
— — — RX-80GASPH — RoHS

RX-80HRT-PHB RX-80HRT-PH2B RX-80HRT-PHSB RX-80HRT-PHLB RX-80HRT-PHLBJ RX-80HRT-PHBM

10 13
8.5 9 13 8.5
.6

5
.3

.3
30°
R0

.1

.2
R0

R0
R0

5
R0

RX-80HRT-PH1BC
RX-80HRT-PHB RX-80HRT-PH2.3BC
RX-80HRT-PH2B RX-80HRT-PH3BC RX-80HRT-PH0.5C RX-80HRT-PH1C RX-80HRT-PH2C
8 11.5
10 9 9

φ2
10
1

2.3

0.5

45° ° 45
° ° 45°
45 60 60°

RX-80HRT-PH2CD RX-80HRT-PH3C RX-80HRT-PH3CD RX-80HRT-PH4C RX-80HRT-PH4.7C RX-80HRT-PH0.8D

SOLDER POTS
11.5 11.5 7 10
φ4.7

φ0.8
11.5 11.5
φ3

φ4
φ2

φ3
1.2

45° 45
°
2 3 45° 45°
45° 0.4

PRODUCTS
SURFACE MOUNT / SMT
RX-80HRT-PH1.2D RX-80HRT-PH1.6D RX-80HRT-PH2.4D RX-80HRT-PH3.2D RX-80HRT-PH5.4D RX-80HRT-PH3K
10 10
60

10
φ3.2
φ1.6

φ2.4

10 7
φ1.2

φ5.4

10.5
φ3

0.5 0.5 0.5 1.2 45°

0.4 1

DESOLDERINGS
RX-80HRT-PH4.5K RX-80HRT-PH4.5KH
60
90

˚
φ4.5

10.5 10.5
φ4.7

1.2
45° 2
45°
SOLDERING
ACCESSORIES

RX-89HRT Series / Applicable Iron Unit (500 W Super High-Power Iron Unit)
Station RX-892AS NEW
MATERIALS
SOLDERING WORK HEATED TOOLS

Applicable Iron Unit RX-89GAS

RX-89HRT-10D RX-89HRT-15D RX-89HRT-15A

21
15

19 18 14
10

12 12
15
1.6
15

2 2 1.6
HAND TOOLS

29
 LEAD-FREE TEMPERATURE-CONTROLLED SOLDERING STATIONS
SOLDERING
SYSTEM

V-groove prevents SOLDER-SPLASH PREVENTION

RoHS ANTI LEAD
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

solder splash. STATIC FREE

V-groove function
LEAD-FREE v-groove AUTOMATIC SOLDER FEEDER
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

MAX Ø1.6 LEAD-FREE SOLDER APPLICABLE*

FD-110 Wide tube

V-groove rollers are different according to solder diameter being used. Please let us know INNOVATIVE DESIGN MEANS FEWER CLOGS
your solder diameter when purchasing FD-110 .To replace or change v-groove rollers, please Handpiece shaped for smooth solder flow
feel free to contact us.

● One-handed soldering work possible. ON/OFF switch is built into the Tube COMPATIBLE WITH YOUR SOLDERING UNIT
Assy FD-100TA (sold separately). for goot RX series soldering stations
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

● ø0.6-1.6 mm lead-free solder applicable. *Please tell us your solder diameter when purchasing.
● Solder feed method for reducing solder clogs.

V-groove function
The solder in this image
is not included. Grooved solder lets Solder cross section
flux vapor be released.
V-groove
Reduces splash. Reduces
defects.

Flux

■ Solder splash
(mm)
14
Without V-groove,
12
flux is scattered.
10

6
With V-groove, there is
little scattering of flux.
4

0 Flux Solder Flux Solder

SOLDER POTS

Without v-groove With v-groove

Stable quality at less cost!

SURFACE MOUNT / SMT

RoHS ANTI LEAD MAX Ø1.6 LEAD-FREE SOLDER APPLICABLE

Fixed Solder Feed STATIC FREE
Wide tube
PRODUCTS

LEAD-FREE AUTOMATIC SOLDER FEEDER INNOVATIVE DESIGN MEANS FEWER CLOGS

FD-100 Handpiece shaped for smooth solder flow
DESOLDERINGS

COMPATIBLE WITH YOUR SOLDERING UNIT

for goot RX series soldering stations
The solder in this image
is not included.
● One-handed soldering work possible. ON/
ACCESSORIES

OFF switch is built into the Tube Assy FD-

SOLDERING

100TA (sold separately).

● ø0.6-1.6 mm lead-free solder applicable.
● Solder feed method for reducing solder
SOLDERING WORK

clogs.
MATERIALS

The above photo is with optional parts. Solder, soldering unit,

and other optional parts are not included with this FD-100.
HEATED TOOLS
HAND TOOLS

30
 SYSTEM
LEAD-FREE SOLDERING
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
SAMPLE CONFIGURATION Constant feed volume.
Stable quality at lower cost.

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

This image is with optional parts. Solder, soldering
unit, and other optional parts are not included with
this FD-100.

➃ Tube Assy

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

➀ Temperature-Controlled ➂ Automatic Solder Feeder Unit ➄ Guide Pipe
Lead-Free Soldering Station FD-100

➁ Tip (RX-80HRT-B)
■ FRONT PANEL (Common FD-100/110)
➅ Nozzle
➊ Mode Changer
➋ Feed Time Adjuster FD-100 Sample comfiguration

SOLDER POTS
➌ Feed Speed Adjuster ➀
Temperature-Controlled
RX-802AS
Lead-Free Soldering Station
  
➍ Main Power Switch
➁ Tip RX-80HRT-B
➎ Return Amount Adjuster Automatic Solder Feeder Unit
➂ FD-100
➏ Delay Time Adjuster

PRODUCTS
SURFACE MOUNT / SMT
➃ Tube Assy (Solder Dia. ø0.6–1.0) FD-100TA-1.0

   ➄ Guide Pipe (for RX-80GAS) FD-100P-80

➅ Nozzle (Solder Dia. ø1.0) FD-100N-1.0

DESOLDERINGS
REPLACEMENT PARTS / OPTIONS SPECIFICATIONS
TUBE ASSY
MODEL FD-100 FD-110
Tube Assy (Solder Dia.ø0.6–1.0) Tube Assy (Solder Dia.ø1.2–1.6)
Voltage 100–240 V AC 50/ 60 Hz
FD-100TA-1.0 FD-100TA-1.6
SOLDERING
ACCESSORIES

Power Consumption 8W
GUIDE PIPE Power Cord Length 1.5 m inlet type
Iron Unit RX-85GAS Iron Unit RX-72GAS RX-802AS (with RX-80GAS)
FD-100P-85 FD-100P-72 RX-852AS (with RX-85GAS)
Applicable Soldering Irons
Iron Unit RX-80GAS RX-822AS (with RX-80/85GAS)
MATERIALS
SOLDERING WORK HEATED TOOLS

FD-100P-80 RX-701/711AS (with RX-72GAS)

Applicable Solder ø0.6–ø1.6 mm ø0.6, ø0.8, ø1.0, ø1.2, ø1.6
NOZZLE Diameter (LF solder applicable) mm (LF solder applicable)
Solder Dia. φ0.6/ 0.65 Solder Dia. φ0.8/ 1.0 Solder Feed Speed 6–22 mm/ s (unloaded)
FD-110N-0.6 FD-110N-1.0 Solder Feed Time 0–4 s
Solder Dia. φ1.2/ 1.6 Foot Switch Returned Solder Amount 0–5 mm (fixed speed)
FD-110N-1.6 FD-100FS Solder Feed Delay Time 0–5 s
Dimensions 82 (W) × 140 (H) × 210 (D) 82 (W) × 149 (H) × 210 (D)
Feeder Pen (Solder Dia.ø0.6–1.0) Feeder Pen (Solder Dia.ø1.2–1.6) Weight 1.5 kg (w/o solder) 1.6 kg (w/o solder)
FD-100PN-1.0 FD-100PN-1.6
*FD-110 configured for your desired solder diameter.
HAND TOOLS

To choose optional parts, please see p. 32

31
 LEAD-FREE TEMPERATURE-CONTROLLED SOLDERING STATIONS
SOLDERING
SYSTEM

CHOOSING OPTIONAL PARTS

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

1. Choose the suitable guide pipe for your Iron Unit.

For RX-80GAS Iron Unit For RX-85GAS Iron Unit For RX-72GAS Iron Unit
Applicable Guide Pipe Applicable Guide Pipe Applicable Guide Pipe
FD-100P-80 FD-100P-85 FD-100P-72
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

RX-80GAS RX-85GAS RX-72GAS

The standard Iron Unit The standard Iron Unit The standard Iron Unit
came with came with came with
RX-802AS/822AS. RX-852AS/822AS. RX-701AS/711AS.

2. Choose the suitable nozzle and tube assy for your solder diameter.
Solder Dia. 0.6 / 0.65 mm 0.8 mm 1.0 mm 1.2 mm 1.6 mm
Tube Assy

Tube Assy Tube Assy

FD-100TA-1.0 FD-100TA-1.6

Nozzle Nozzle Nozzle Nozzle

FD-110N-0.6 FD-110N-1.0 FD-110N-1.6
SOLDER POTS

Feeder Pen
Feeder Pen Feeder Pen
FD-100PN-1.0 FD-100PN-1.6
SURFACE MOUNT / SMT

Nozzle not included. Foot switch is required.

PRODUCTS

ST-21, ST-22 soldering iron stand for ST-27 soldering iron stand for
RX-802AS/852AS/822AS RX-701AS/711AS
If you don't have it, please purchase one. If you don't have it, please purchase one.
DESOLDERINGS

(The old ST-20 is not applicable) (The old ST-77 is not applicable)

Foot Switch
FD-100FS
ACCESSORIES

ST-22
ST-21
SOLDERING

ST-27
SOLDERING WORK

ST-20 ST-77
MATERIALS
HEATED TOOLS
HAND TOOLS

32
SOLDERING LEAD-FREE TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER SOLDER POTS SURFACE MOUNT / SMT
SURFACE-MOUNT DESOLDERINGS SOLDERING SOLDERING WORK HEATED TOOLS HAND TOOLS

3333
SYSTEM TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER PRODUCTS ACCESSORIES MATERIALS
SOLDERING STATIONS
TEMPERATURE-CONTROLLED

PX-501AS/501
PX-601AS/601
RX-701AS/711AS
SOLDERING STATIONS
TEMPERATURE-CONTROLLED

MINI SOLDERING STATIONS

SOLDERING CONTROLLERS
SOLDERING STATIONS
 TEMPERATURE-CONTROLLED SOLDERING STATIONS
SOLDERING
SYSTEM

Lightweight, slim handpiece

RoHS ANTI
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

with reduced heat-up! STATIC

SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

TEMPERATURE-CONTROLLED SOLDERING STATIONS

RX-701AS/RX-711AS
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

RX-711AS

New Soldering Iron Stand

More stable, better operation
RX-701AS

Quick Heat Recovery SPECIFICATIONS

New heater with internal sensor achieves 60 W. Model RX-701AS RX-711AS
Voltage 110 V, 120 V, 220 V, 230 V, 240 V AC 50/ 60 Hz
Easy to Use Power Consumption 65 W
Allows two-tiered setting with another RX-701AS/711AS. Power Cord Length 1.2 m
Temperature Setting Range 200–450°C 200–480°C
High Insulation. Reliable 24 V Output. Ripple temperature ±5˚C (unloaded)
The heater is completely separated from the input power Insulation Resistance Over 100 MΩ (500 V DC)
by the insulated transformer. And the 24 V heater is safe to Accessories
Soldering Iron Stand (ST-27 ),
Soldering Iron Tip (PX-60RT-B)
SOLDER POTS

use for sensitive components.

Control Unit
Output Voltage 24 V AC
Comfortable Handpiece Protective Cover (PAT.)
Dimensions 115 (W) × 98 (H) × 146 (D )mm
We have made it slimmer while still Prevents tampering. Weight 1.5kg
SURFACE MOUNT / SMT

achieving less heating of grip. Soldering Iron Unit

Voltage / Consumption 24 V AC / 60 W
PRODUCTS

Wide Variety of Tips Ground Resistance Less than 2 Ω

17 26 17 26
φ6.5

φ6.5

R0.5 R0.2Leak Voltage Less than 2 mV

A wide variety of replacement
tips for all types of work. Refer Heater Ceramic heater
Standard Tip Standard Tip
Cord Length 1.2 m
DESOLDERINGS

to page p. 36 for further details. PX-60RT-B PX-60RT-SB

Length 197 mm (with PX-60RT-B)
INCLUDED Weight 44 g (with PX-60RT-B)
Equivalent to IPC/EIA J-STD-001C
Control Unit Soldering Iron Soldering Iron Stand
RX-72GAS ST-27 *The length does not include the cord bushing. The weight does not include the cord.
ACCESSORIES
SOLDERING

TIP-TEMPERATURE RECOVERY FEATURES

PX-60RT-B included Brass Wool & Sponges included

Solder melted consecu- （℃）

SOLDERING WORK

450
REPLACEMENT PARTS / OPTIONS tively on 5 mm-dia land.
400
Set at 450˚C
Approx. 2 s / land.
MATERIALS

Heater Spacer Set at 350˚C

(with PX-60RT-B tip) 300
Temp.

RX-72H RX-72SS
Heater Barrel Iron Unit 200

RX-72HP RX-72GAS 100

Collar
HEATED TOOLS

TQ-77NUT 0 1 2 3 4 5 6
(min.)

Collar
Heater Barrel Spacer Heater
HAND TOOLS

Tip

34
 SYSTEM
SOLDERING
High-performance soldering station. Accurate temperature control,

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
high-performance compact model.
MINI SOLDERING STATIONS SOLDERING CONTROLLERS
RoHS ANTI RoHS ANTI
PX-501AS/PX-501 STATIC
PX-501AS
PX-601AS/PX-601 STATIC
PX-601AS

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

PX-601
PX-501

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

Temperature adjustable Comes with protective
250-450°C cover (PAT.)

Quick Start (PAT.) SPECIFICATIONS

Reaches set temperature fast with the Quick Start circuit.
Model PX-501 PX-501AS PX-601 PX-601AS
Temperature Calibration Voltage 110 V, 220–240 V AC 50/ 60 Hz
Accurate calibration. Power Consumption 85 W
Power Cord Length 1.5 m
Leakage Current / Insulation-Resistance Temperature Setting
250–450°C
Measuring Terminal Range
Ripple temperature ±5˚C (unloaded)
The PX-601 Series has a measurement terminal to easily
Insulation Resistance Over 100 MΩ (500 V DC)
assess leakage current and insulation resistance. Accessories Soldering Iron Tip (PX-60RT-B)

SOLDER POTS
Control Unit
Output Voltage 110 V, 220–240 V AC
Dimensions 100 (W) × 57( H) × 85 (D) mm 48 (W) × 31 (H) × 130 (D) mm
TIP-TEMPERATURE RECOVERY FEATURES
Weight 266 g 75 g

PRODUCTS
SURFACE MOUNT / SMT
Solder melted consecutively （℃） Soldering Iron Unit
450
on 5 mm-dia land. Approx. 2 s 400
Set at 450˚C
Voltage / Consumption 110 V, 220–240 V AC /80 W
/ land. Set at 350˚C Ground Resistance Less than 2 Ω
Temp.

300
(with PX-60RT-B tip)
200
Leak Voltage Less than 2mV
Heater Ceramic heater
100

DESOLDERINGS
Cord Length 1.2 m
0 1 2 3 4 5 6 Length 195 mm (with PX-60RT-B)
(min.)
Weight 41 g (with PX-60RT-B)
*The length does not include the cord bushing. The weight does not include the cord.
REPLACEMENT PARTS / OPTIONS
Heater PX-501AS/601AS Iron Unit
PX-60H PX-60GAS
SOLDERING
ACCESSORIES

PX-501/601 Iron Unit Collar Anti-Static Model

PX-60G TQ-77NUT PX-501AS/PX-601AS
Heater Barrel
PX-60HP
MATERIALS
SOLDERING WORK HEATED TOOLS

Heater
Barrel
PX-501AS
Collar
Tip Heater
PX-601AS

Recommended ST-27 refer to page p. 88

Wide Variety of Tips 17 26 17 26

φ6.5

R0.5
A wide variety of replacement R0.2

tips for all types of work. Refer Standard Tip Standard Tip
to page p. 36 for further details. PX-60RT-B PX-60RT-SB
HAND TOOLS

ST-27

35
 TEMPERATURE-CONTROLLED SOLDERING STATIONS
SOLDERING
SYSTEM

PX-60RT Series / Applicable Model RX-701AS, RX-711AS, PX-501, PX-501AS, PX-601,PX-601AS, CXR-31,CXR-41
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

26
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

RoHS

φ6.5
PX-60RT-B PX-60RT-SB PX-60RT-LB PX-60RT-1C
PX-60RT-1C PX-60RT-1.5C
¥840 (税別¥800)／ *PX-61RT-1C ¥735 (税別¥700)
17 17 25 15
° ° 15
6 60 60

5
6
5

5 6

φ
φ

.5 .2 .2
R0 R0 R0

1.5
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

PX-60RT-2C PX-60RT-3C PX-60RT-4C PX-60RT-0.5CR PX-60RT-0.8CR

17 15 17
45° 12
45° 17 45° 17 45° 3 45° 3

5
12

φ
5

5
5

12
φ

φ
φ

φ4

0.5

0.8
φ2.1

φ3

PX-60RT-1CR PX-60RT-2CR PX-60RT-3CR PX-60RT-4CR PX-60RT-0.8D

15 17 17 17
5 45° 12 12 45° 12 0.6
60
° 45° 6
17

5
6
5

5
6

φ
6
φ

φ
φ4
φ2.1

φ0.8
1

φ3

PX-60RT-1.2D PX-60RT-1.2LD PX-60RT-1.6D PX-60RT-2.4D PX-60RT-3.2D

17 25 0.5 17 17
0.7 17
0.7 6 6 0.5 0.5
6
5

6
5

5
7
φ

5
φ

φ
φ1.2

φ1.6
φ1.2

φ2.4

φ3.2
PX-60RT-3K PX-60RT-5K PX-60RT-1.8H PX-60RT-H PX-60RT-R
40
˚
90

1.2
24

1
˚

16 17
45° 45° 15
4
12 1.8 4.0
2

5
SOLDER POTS

φ
φ
5
φ

7.5 7.5
φ5
φ3

φ5
14 19
2 2 25° 1.5

3.2
25°

PX-60RT-RT PX-60RT-S4 ¥735 (税別¥700)／*PX-61RT-S4 ¥641 (税別¥610)

PX-60RT-S4 PX-60RT-SB2 PX-60RT-SI
17 15 15 13
4
SURFACE MOUNT / SMT

2 2
5

4
5

4
5
5

φ
φ
φ

.3 .3 .2
R0 R0 R0
2.5
φ4.2
2
PRODUCTS
DESOLDERINGS
ACCESSORIES
SOLDERING
SOLDERING WORK
MATERIALS
HEATED TOOLS
HAND TOOLS

36
SOLDERING LEAD-FREE TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER SOLDER POTS SURFACE MOUNT / SMT
SURFACE-MOUNT DESOLDERINGS SOLDERING SOLDERING WORK HEATED TOOLS HAND TOOLS

3737
SYSTEM TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER PRODUCTS ACCESSORIES MATERIALS
SOLDERING STATIONS
PX-401

PX-201

PX-335/338/342

ST-200
TEMPERATURE-CONTROLLED
HIGH HEAT VOLUME TEMP-CONTROLLED
SOLDERING IRONS

TEMPERATURE-CONTROLLED

FIXED-TEMPERATURE
SOLDERING IRONS
SOLDERING IRON

SOLDERING IRON

PCB HOLDER
 TEMPERATURE-CONTROLLED SOLDERING IRONS
SOLDERING
SYSTEM

Large tip for high Wide-range iron with temperature

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

thermal-storage effect. adjuster.

SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

HIGH HEAT VOLUME TEMPERATURE-CONTROLLED

TEMP-CONTROLLED SOLDERING IRON SOLDERING IRON
PX-401 PX-201
RoHS RoHS
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

Temperature Setting Screw

PX-401

Power Lamp Heat Insulation Cap for Temperature

Setting Screw

Quick Storage Included.

Power Lamp

TEMPERATURE ADJUSTABLE ACCURATE TEMPERATURE CONTROL TEMPERATURE ADJUSTABLE ACCURATE TEMPERATURE CONTROL
300-480°C Ceramic heater with internal sensor 250-450°C Ceramic heater with internal sensor
ERGONOMIC GRIP HIGH THERMAL-STORAGE EFFECT ERGONOMIC GRIP HEAT-RESISTANT CAP
Prevents fatigue Easy soldering of large parts Prevents fatigue For quick storage after use

SPECIFICATIONS SPECIFICATIONS
Model PX-401 Model PX-201
Voltage 110-120 V, 220-240 V AC 50/ 60 Hz Voltage 110-120 V, 220-240 V AC 50/ 60 Hz
Power Consumption 70 W Power Consumption 70 W
Temperature Setting Range 300–480°C Temperature Setting Range 250–450°C
SOLDER POTS

Ripple temperature ±5˚C (unloaded) Ripple temperature ±5˚C (unloaded)

Insulation Resistance Over 100 MΩ (500 V DC) Insulation Resistance Over 100 MΩ (500 V DC)
Heater Ceramic Heater Heater Ceramic Heater
Power Cord Length 1.5 m Power Cord Length 1.5 m
Length 215 mm Length 210 mm
SURFACE MOUNT / SMT

Weight 92 g Weight 90 g
Accessories Soldering Iron Tip (PX-40RT-5C) Accessories Soldering Iron Tip (PX-2RT-SB)
PRODUCTS

*The length does not include the cord bushing. The weight does not include the cord. *The length does not include the cord bushing. The weight does not include the cord.

REPLACEMENT TIPS
PX-40RT-B PX-40RT-2C PX-40RT-3C
Replacement tips are interchange able with PX-3 series. Refer to next page.
DESOLDERINGS

φ10
φ10

20 REPLACEMENT PARTS / OPTIONS

φ10

R0.6 20 20
3

Heater Heater Barrel

2

PX-20H TQ-77HP (S)

PX-40RT-4C PX-40RT-5C PX-40RT-8C
Spacer Collar
NEW
TQ-77SS TQ-77NUT
φ10

20
φ10

20
φ10

20
ACCESSORIES

CAP Recommended Stand

SOLDERING

8
4

TQ-CAP ST-27
PX-40RT-3D PX-40RT-5D PX-40RT-5CJ
25
φ10

φ10

20 20
φ10
SOLDERING WORK

φ3

φ5

0.5
φ

1
5
MATERIALS

71
Overall View 25

REPLACEMENT PARTS / OPTIONS

Heater Collar
HEATED TOOLS

PX-20H CXR-80NUT
Washer Recommended Stand
CXR-80 WS ST-27

Tip Collar Heater Barrel

Collar Washer Heater Spacer
HAND TOOLS

Tip

Heater

38
 SYSTEM
SOLDERING
The heater is automatically

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
controlled. RoHS

FIXED-TEMPERATURE SOLDERING IRONS

PX-335/PX-338/PX-342

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

Power Lamp

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

PX-338 REPLACEMENT TIPS
PX-2RT-SB PX-2RT-B PX-2RT-BC
45° 15
15
13 15
12 12
10
4
5

5
5.

5.
4

5.
4

R0 φ2.5
φ

1
.5
R0
.3
PX-2RT-2BC PX-2RT-3BC PX-2RT-2C
45° 13 45° 13 45° 15
8 13
8
10

5
5.
4 5

φ
6
6

φ
φ

φ2.1
2.2

3.2
PX-2RT-3C PX-2RT-4C PX-2RT-5C
45° 15
POWER LAMP LEAD-FREE APPLICABLE 13 45° 15 45° 16
Easy heater-on check High-power ceramic heater 10 12
5
5

5.

5
5.

φ
φ
φ

φ4
φ3

AUTOMATIC HEAT CONTROL COMFORTABLE SOLDERING

According to the heating load of the tip Improved grip design PX-2RT-1.6D PX-2RT-2.4D PX-2RT-3.2D

SOLDER POTS
15 15 15
COOLER GRIP 12 12
5

12

5
0.5
5

5.

0.5 3.3 4.2

5.
2.2 0.5
5.

Thermal insulation & rubber grip

φ
φ

φ3.2
φ2.4
φ1.6

PX-2RT-4D PX-2RT-5D PX-2RT-5K

PRODUCTS
SURFACE MOUNT / SMT
SPECIFICATIONS 15 15 2
90
˚
15
5

12
φ4 5.5

5.1 13
5.

1
φ

0.5 5
φ
φ

φ5

Model PX-335 PX-338 PX-342 45˚

Voltage 110-120 V, 220-240 V AC 50/ 60 Hz PX-2RT-8S PX-2RT-6E Overall View
110-120 V model 90-130 W 13.5 16
37
Power 1.2 3 4
8

5
φ

Consumption 220-240 V
φ

φ7

85-120 W 75-110 W
model

DESOLDERINGS
PX-2RT-B
Temperature Setting Range 350°C 380°C 420°C
Ripple temperature ±5˚C (unloaded)
Insulation Resistance Over 100 MΩ (500 V DC)
Heater Ceramic Heater
Power Cord Length 1.5 m
SOLDERING
ACCESSORIES

Length 220 mm
Round solder-plated tip
Weight 70 g
PX-2RT-2CR PX-2RT-3CR
Accessories Soldering Iron Tip (PX-2RT-B)
45° 15 45° 15
13 13
10 10
*The length does not include the cord bushing. The weight does not include the cord.
5
5

5
5.

4
5.

φ
φ

φ2.1

MATERIALS
SOLDERING WORK HEATED TOOLS
φ3

Standard type PX-2RT-4CR PX-2RT-5CR

REPLACEMENT PARTS / OPTIONS 45° 45°

15 16
12 7
5

6
5.

Heater Spacer
φ
φ

φ5
φ4

PX-20H TQ-77SS
Heater Barrel Collar Round solder-plated type
PX-3HP PX-3NUT
Recommended Stand
ST-27
Collar
Heater Barrel Spacer

Heater
Tip
HAND TOOLS

39
 PCB HOLDER
SOLDERING
SYSTEM

Holds large PCBs firmly

RoHS ANTI
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

STATIC
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

PCB Holder (PCB Assembly Jig)

ST-200
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

Example of use
Holds large PCBs firmly
Useful for mounting of
components, cutting lead
wire, soldering, etc.

Takes large PCBs

SOLDER POTS

Accommodates PCBs up to
500 x 210 mm when central
rail is removed.
SURFACE MOUNT / SMT

Easy to mount/unmount PCBs

Springs in guide rails enable you to mount/unmount PCBs
PRODUCTS

without re-adjustments.
Anti-static foam for supporting compo-
nents
DESOLDERINGS

Anti-static foam supports components so they don’t move

around or fall.
Adjust PCB angle
ACCESSORIES

Adjusts allow PCB to be set at various angles.

SOLDERING

SPECIFICATIONS
SOLDERING WORK

Model ST-200
MATERIALS

Width 575 mm
Depth 360 mm
Hight 335 mm (at vertical position)
Weight 5.4kg
HEATED TOOLS

REPLACEMENT PARTS / OPTIONS

ST-200 Sponge
ST-200SP
HAND TOOLS

40
SOLDERING LEAD-FREE TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER SOLDER POTS SURFACE MOUNT / SMT
SURFACE-MOUNT DESOLDERINGS SOLDERING SOLDERING WORK HEATED TOOLS HAND TOOLS

4141
SYSTEM TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER PRODUCTS ACCESSORIES MATERIALS
SOLDERING STATIONS
HRC-401
CS-21/31
CXR-31/41

CXR-60/80/100

HRC-80/100
TQ-77/95
SOLDERING IRONS

MOUNTING-BOARD SOLDERING IRONS

HIGH-EFFICIENCY

STAINED-GLASS SOLDERING IRONS

PRECISION PCB SOLDERING IRONS

STAINED-GLASS SOLDERING IRON

HIGH-POWER SOLDERING IRONS
QUICK-HEAT SOLDERING IRONS

TEMPERATURE-CONTROLLED
PRECISION-COMPONENT
 HIGH-EFFICIENCY SOLDERING IRONS
SOLDERING
SYSTEM

Two-stage high-power heater. POWER LAMP (TQ-77 ONLY) COMFORTABLE SOLDERING

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

Easy heater-on check High-power ceramic heater

QUICK-HEAT SOLDERING IRONS TWO-STAGE HEAT-SWITCH SYSTEM ERGONOMIC GRIP
TQ-77/95 RoHS
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

10 times higher power than normal Prevents fatigue

Power monitor lamp

QUICK-HEAT BUTTON
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

Controles power
trigger

Specially processed
long-life tip
TQ-95
TQ-77
Heat-resistant cap for quick
storage after use.

SPECIFICATIONS REPLACEMENT TIPS

TQ-77RT-SB TQ-77RT-B TQ-77RT-BC
Model TQ-77 TQ-95
Voltage 110-130 V, 220-240 V AC 50/ 60 Hz
17 17 45° 17
12.5 13 13
5

5
5.

5.

5
6 6 6
φ

5.
φ
High 150 W / Low 15 W (110-130 V model)

φ
Power Consumption

1
φ4

High 200 W / Low 20 W (220-240 V model)

.5
R0
.3
R0

Insulation TQ-77RT-2C TQ-77RT-3C

Over 100 MΩ (500 V DC)
Resistance
45° 17 45° 17
Heater Ceramic Heater 10 10

5
5

5.
5.

φ
φ

Power Cord Length 1.5 m

φ2.1

φ3
Length 167 mm 210 mm
Weight 90 g 65 g
Overall View 38 (48)
Soldering Iron Tip (TQ-77RT-B)
Accessories Soldering Iron Tip (TQ-77RT-B)
Cap for TQ-95 (TQ-CAP)

φ7.3
φ5.5
SOLDER POTS

*The length does not include the cord bushing. The weight does not include the cord.
NOTE: High power runs while trigger/quick button is pressed. ( ) Size for 220-240 V AC model

REPLACEMENT PARTS / OPTIONS

TQ-95Heater TQ-77 Heater TQ-77/95 Spacer TQ-95 Heat-Resistant Cap Recommended Stand
SURFACE MOUNT / SMT

TQ-95H TQ-77H TQ-77SS TQ-CAP ST-27

TQ-77/95 Heater Barrel TQ-77/95 Collar
PRODUCTS

TQ-77HP(L) 220-240 V TQ-77NUT

TQ-77HP(S) 110-130 V

Best for precision soldering. SPECIFICATIONS

DESOLDERINGS

PRECISION PCB SOLDERING IRONS Model CS-21 CS-31

CS-21/31 RoHS
Voltage
Power Consumption
110 V, 220 V, 240 V AC 50/ 60 Hz 110 V, 120, 220 V, 240 V AC 50/ 60 Hz
20 W 25 W
Insulation
Over 100 MΩ (500 V DC)
Resistance
Heater Ceramic Heater
ACCESSORIES
SOLDERING

Power Cord Length 1.5 m

CS-31 Length 188 mm
Weight 43 g
Accessories Soldering Iron Tip (CS-20/30RT-SB)
SOLDERING WORK

*The length does not include the cord bushing. The weight does not include the cord.
MATERIALS

CERAMIC-PIPE HEATER
Lower priced tips REPLACEMENT TIPS
CS-20/30RT-SB CS-20/30RT-SBC
PERFECT FOR PRECISION SOLDERING
HEATED TOOLS

Slim and sharp tips R0.25 14.5 25.5 15 25.5

φ3
φ3

SLIM GRIP
Easy to hold CS-20/30RT-2C CS-20/30RT-3C
REPLACEMENT PARTS / OPTIONS 15 25 15 25
φ3
φ3

φ3
φ2

CS-21 Heater Recommended Stand

HAND TOOLS

CS-21H ST-27
CS-31 Heater
CS-31H

42
 SYSTEM
SOLDERING
Best for SMD soldering. High-powered quick thermal recovery.

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
RoHS RoHS
PRECISION-COMPONENT HIGH-POWER SOLDERING IRONS
MOUNTING-BOARD SOLDERING IRONS
CXR-60/80/100
CXR-31/41 HIGH THERMAL-STORAGE EFFECT
Good for terminals, connectors

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

COMPACT AND LIGHT
Easy use THICK-PLATED LONG-LIFE TIP
Hard chrome coated
THICK-PLATED LONG-LIFE TIP
Hard chrome coated EASY HEATER REPLACEMENT
Connector-type heater
EASY HEATER REPLACEMENT
Connector-type heater

CXR-31/41

CXR-100
CXR-31

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

Heat-resistant cap (TQ-CAP)is not
available for the CXR-60/80/100.

Heat-resistant cap for

quick strage after use.
(Sold sepalately)
CXR-60/80 CXR-100

REPLACEMENT TIPS

SPECIFICATIONS For CXR-31/41

17 Series
26 φ6.5 17 26

φ6.5
A wideR0.5
variety of replacement tips for all R0.2

Model CXR-31 CXR-41 CXR-60 CXR-80 CXR-100 types of work. Refer to p. 36 for further
110 V, 120 V 110 V,120 V Standard Tip Standard Tip
details.PX-60RT-B

SOLDER POTS
Voltage 220-230 V AC 220-230 V,240 V 110-130 V, 220-240 V AC 50/ 60 Hz PX-60RT-SB
Power Consumption 22 W 30 W 28 W 32 W 38 W
Insulation Resistance Over 100 MΩ (500 V DC)
Heater Ceramic Heater For CXR-60/80 Series
Power Cord Length 1.5 m CXR-80RT-B CXR-80RT-2C CXR-80RT-3C

PRODUCTS
SURFACE MOUNT / SMT
Length 205 mm 268 mm
Weight 60 g 80 g 88 g R0.6 20 20 20 φ10
φ10
φ10

Soldering Iron Tip

3
2

Accessories
PX-60RT-SB CXR-80RT-5C CXR-100RT-7C
*The length does not include the cord bushing. The weight does not include the cord. CXR-80RT-4C CXR-80RT-5C CXR-80RT-3D
20 20 20
φ10
φ10
φ10

DESOLDERINGS
φ3
5
4

0.5
REPLACEMENT PARTS / OPTIONS
CXR-80RT-5D CXR-80RT-5CJ
CXR-31 Heater CXR-41 Heater
CXR-31H CXR-41H 20 25
φ10
φ10

CXR-31/41 Spacer CXR-31/41 Heater Barrel

φ5

CXR-31SS PX-60HP 1
φ

SOLDERING
ACCESSORIES
5

CXR-31/41 Collar Heat-Resistant Cap

TQ-77NUT TQ-CAP
For CXR-100 Series
CXR-100RT-B CXR-100RT-2C CXR-100RT-3C
CXR-60 Heater CXR-80 Heater
MATERIALS
SOLDERING WORK HEATED TOOLS

CXR-60H CXR-80H R0.6 20 20 20

φ11
φ11
φ11

CXR-100 Heater CXR-60/80 Collar

2

CXR-100H CXR-80NUT
CXR-100RT-5C CXR-100RT-7C CXR-100RT-5D
CXR-100 Collar CXR-60/80 Washer
CXR-100NUT CXR-80 WS 20 20 20
φ11

φ11
φ11

CXR-100 Washer Recommended Stand

φ5
5

CXR-100 WS ST-27 1
CXR-100RT-7D CXR-100RT-7CJ
20 25
φ11

φ11
φ7

Collar Heater Barrel 1.5

CXR-31/41 Tip Spacer Heater
φ
7

HAND TOOLS

CXR-60/80/100
Collar Washer Tip Heater

43
 HIGH-EFFICIENCY SOLDERING IRONS
SOLDERING
SYSTEM
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

Best temperature adjustment.

RoHS
TEMPERATURE-CONTROLLED
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

STAINED-GLASS SOLDERING IRON

Power Lamp
HRC-401
lSpecial soldering iron for stained-glass work. lAdjustable
to optimum temperature for copper tape, lead came or pearl
frame. l70 W high-power.

HRC-401
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

Slim grip for easy handling.

RoHS
STAINED-GLASS SOLDERING IRONS
HRC-80/HRC-100
lSpecial soldering iron for stained-glass work. lGood for
Tiffany-style to lead-came style. lEquipped with slim grip for
easy handling with small hands.

HRC-80

HRC-80 HRC-100

SPECIFICATIONS
SOLDER POTS

Model HRC-401 HRC-80 HRC-100

Voltage 110-130 V, 220-240 V AC 50/ 60 Hz
Power Consumption 70 W 32 W 38 W
Temperature Setting Range 300–480°C - -
SURFACE MOUNT / SMT

Insulation Resistance Over 100 MΩ (500 V DC)

Heater Ceramic Heater
HRC-100
PRODUCTS

Power Cord Length 1.5 m

Length 215 mm 273 mm 273 mm
Weight 83 g 80 g 88 g
Soldering Iron Tip
Accessories
PX-40RT-5CJ CXR-80RT-5CJ CXR-100RT-7CJ
DESOLDERINGS

*The length does not include the cord bushing. The weight does not include the cord.

REPLACEMENT TIPS
ACCESSORIES
SOLDERING

HRC-401 HRC-80 HRC-100

PX-40RT-5CJ CXR-80RT-5CJ CXR-100RT-7CJ
φ10

25 25
φ11

25
φ10
SOLDERING WORK

φ
φ
φ

7
5
5
MATERIALS

REPLACEMENT PARTS / OPTIONS

HRC-401 Heater HRC-80 Heater
PX-20H CXR-80H
HEATED TOOLS

HRC-100 Heater HRC-401/80 Collar

CXR-100H CXR-80NUT
HRC-100 Collar HRC-401/80 Washer
CXR-100NUT CXR-80 WS
HRC-100 Washer Recommended Stand
CXR-100 WS ST-27
HAND TOOLS

44
 SYSTEM
LEAD-FREE SOLDERING
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
NICHROME HEATER SOLDERING IRONS/

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

GAS-POWERED SOLDERING IRONS
GENERAL ELECTRONICS KS/KX series
SOLDERING IRONS
SHEET-METAL SOLDERING IRONS HP series
DUAL-POWER SOLDERING IRONS KYP-60/70

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

PORTABLE SOLDERING IRON WITH CAP CA-30R/40R
LOW-VOLTAGE SOLDERING IRONS MI-6 series
STARTER KIT SG series
(ELECTRONICS/CRAFT & HOBBY)
GAS-POWERED SOLDERING IRONS GP series
RED / BLACK TIPS R/RD/RB series
COPPER TIPS T series

SOLDER POTS
PRODUCTS
SURFACE MOUNT / SMT
SURFACE-MOUNT
SOLDERING DESOLDERINGS
MATERIALS ACCESSORIES
SOLDERING WORK HEATED TOOLS HAND TOOLS

4545
 NICHROME HEATER SOLDERING IRONS/GAS-POWERED SOLDERING IRONS
SOLDERING
SYSTEM

Our best-selling soldering iron.

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

RoHS

es
GENERAL ELECTRONICS

s
Sw isto ers

rs

bl

se
s

s
or

to

re
Model / Application

Ca
Te ich s
rd

Co als
s ns

Ca
r m es
r
t

ec

wi
oa

sis

ial
Rende

in

al
nn
.B

ad
SOLDERING IRONS

ax
an

et
P.C

Co

Co
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

Le
IC

Tr

M
KS-20R / KX-20R

KS Series KS-30R / KX-30R

KS-40R / KX-40R
KS-60R / KX-60R
KS-80R / KX-80R
RED TIP KS-100R / KX-100R
Long-life tips

LIGHT GRIP
Easy to use SPECIFICATIONS
KS series
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

Model KS-20R KS-30R KS-40R

Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz
20 W equiv. 30 W equiv. 40 W equiv.
Power Consumption Power consumption may vary according to location and item specs.
Please see Products power consumption and safety standard p.6
Heater Nichrome Heater
Length 205 mm
Weight 45 g
KS-30R
Soldering Iron Tip
Accessories
R-48SB R-48B R-48B

Model KS-60R KS-80R KS-100R

Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz
60 W equiv. 80 W equiv. 100 W equiv.
Power Consumption Power consumption may vary according to location and item specs.
Please see Products power consumption and safety standard p.6
Heater Nichrome Heater
Length 230 mm 235 mm 240 mm
Weight 65 g 70 g 75 g
Soldering Iron Tip
Accessories
R-6B RD-67BC RD-68BC
*The length does not include the cord bushing. The weight does not include the cord.

KX series
New ergonomic design. Model KX-20R KX-30R KX-40R
RoHS Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz
GENERAL ELECTRONICS
SOLDER POTS

20 W equiv. 30 W equiv. 40 W equiv.

Power Consumption
SOLDERING IRONS Power consumption may vary according to location and item specs.
Please see Products power consumption and safety standard p.6

KX Series Heater
Length
Weight
Nichrome Heater
208 mm
50 g
SURFACE MOUNT / SMT

RED TIP Accessories

Soldering Iron Tip
Long-life tips R-48SB R-48B R-48B
PRODUCTS

ERGONOMIC HANDLE Model KX-60R KX-80R KX-100R

Reduces fatigue Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz
60 W equiv. 80 W equiv. 100 W equiv.
Power Consumption Power consumption may vary according to location and item specs.
DESOLDERINGS

Please see Products power consumption and safety standard p.6

Heater Nichrome Heater
Length 233 mm 238 mm 243 mm
Weight 70 g 75 g 80 g
Soldering Iron Tip
Accessories
R-6B RD-67BC RD-68BC
ACCESSORIES

*The length does not include the cord bushing. The weight does not include the cord.
SOLDERING

REPLACEMENT PARTS / OPTIONS

KS-20R/KX-20R Heater KS-30R/KX-30R Heater
KS-20H KS-30H
KX-30R
KS-40R/KX-40R Heater KS-60R/KX-60R Heater
SOLDERING WORK

KS-40H KS-60H
KS-80R/KX-80R Heater KS-100R/KX-100R Heater
MATERIALS

KS-80H KS-100H
Recommended Stand Recommended Stand
ST-75 ST-11

REPLACEMENT TIPS
HEATED TOOLS

R-48SB R-48B R-6B

75 75 80
R0.3 14 R0.5 9 R0.8 12
φ4
φ4

φ6

RD-67BC RD-68BC
83 88
HAND TOOLS

15 17
φ8
φ7

φ6
φ6

1.5
1.5

46
 SYSTEM
SOLDERING
High power. Suitable for sheet-metal work.

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
RoHS
SHEET-METAL SOLDERING IRONS
HP-150/200/300

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

WOODEN HANDLE LARGE COPPER TIP
Has good insulation Can be shaped to suit your work purpose

SPECIFICATIONS
Model HP-150 HP-200 HP-300
Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz
150 W equiv. 200 W equiv. 300 W equiv.

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

Power Consumption Power consumption may vary according to location and item specs.
Please see Products power consumption and safety standard p.6
Heater Nichrome Heater
Length 360 mm 370 mm 390 mm
Weight 450 g 610 g 710 g
Soldering Iron Tip
Accessories
T-13A T-16A T-19A
*The length does not include the cord bushing. The weight does not include the cord.

SOLDER POTS
PRODUCTS
SURFACE MOUNT / SMT
SOLDERING DESOLDERINGS
MATERIALS ACCESSORIES
SOLDERING WORK HEATED TOOLS

REPLACEMENT TIPS
HP-150 HP-200 HP-300
T-13A T-16A T-19A
115 120 135
20 25 30
φ19
φ16
φ13

REPLACEMENT PARTS / OPTIONS

HP-150 Heater HP-200 Heater
HP-150H HP-200H
HP-300 Heater Recommended Stand
HP-300H ST-70
HAND TOOLS

47
 NICHROME HEATER SOLDERING IRONS/GAS-POWERED SOLDERING IRONS
SOLDERING
SYSTEM

For hobby use with dual switch. Length only 150 mm! Weight only 9 g!
RoHS RoHS
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

DUAL-POWER SOLDERING IRONS LOW-VOLTAGE SOLDERING IRONS

KYP-60/70 MI-6-6 V/MI-6-12 V
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

High 60 W power when

trigger is pulled.

MI-6T-SC MI-6T-SB The tip and heater barrel

KYP-70 comes with heat 30 30 connect to the minus pole (-)
R0.25
RB-475B
resistant cap for quick 11 11 of the power supply. When using
power from a car cigarette-lighter

φ2.4

φ4
storage.

φ4
75 socket, never let the iron come into
R0.5 Standard contact with the plus pole (+) of
9
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

the car's electrical circuitry, or it

φ4

may short-circuit or cause serious

For other replacement tips, damage.
refer to next page.

SPECIFICATIONS SPECIFICATIONS
Model KYP-60 KYP-70 Model MI-6-6 V MI-6-12 V
Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz Voltage 5−6 V AC / DC 11−12 V AC / DC
Trigger ON 60 W equiv./Trigger OFF 30 W equiv. Power Consumption 6W
Power Consumption Power consumption may vary according to location and item specs.
Heater Nichrome Heater
Please see Products power consumption and safety standard p.6
Length 150 mm
Heater Nichrome Heater3
Length 175 mm Weight 9g
Weight 160 g Accessories Soldering Iron Tip : MI-6T-SC
Accessories TQ-CAP (KYP-70), Soldering Iron Tip : RB-475B *The length does not include the cord bushing. The weight does not include the cord.
*The length does not include the cord bushing. The weight does not include the cord.
REPLACEMENT PARTS / OPTIONS
REPLACEMENT PARTS / OPTIONS MI-6-6 V Heater MI-6-12 VHeater
Heater Heat Resistant Cap for KYP-70 MI-6H-6 V MI-6H-12 V
KYP-70H TQ-CAP Recommended Stand
Recommended Stand ST-30
ST-11

Store quickly after soldering. Value Package

RoHS STARTER KIT (ELECTRONICS/CRAFT & HOBBY)
PORTABLE SOLDERING IRON WITH CAP
SOLDER POTS

CA-30R/40R SG series NEW

Recommended for Beginners
SURFACE MOUNT / SMT

SG-1
PRODUCTS

CA-30R

SPECIFICATIONS
DESOLDERINGS

Model CA-30R CA-40R

Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz
30 W equiv. 40 W equiv.
Power Consumption Power consumption may vary according to location and item specs.
Please see Products power consumption and safety standard p.6 SG-2
ACCESSORIES

Heater Nichrome Heater

SOLDERING

Length 185 mm
Weight 60 g
Accessories Soldering Iron Tip : R-48B
*The length does not include the cord bushing. The weight does not include the cord.
SOLDERING WORK

R-48B
MATERIALS

R0.5 75 Gun mode

9
φ4

For other replacement tips,

SPECIFICATIONS
HEATED TOOLS

refer to next page.

Model SG-1 SG-2
CLASSIFICATION Electronics Kit Craft & Hobby Kit
Pen mode
Solder for Electronics Solder for Craft & Hobby
REPLACEMENT PARTS / OPTIONS Desoldering Wick CP-2015 p.80 Square Scraper/ Knife p.86

CA-30R Heater CA-40R Heater INCLUDED ITEMS Tapered Reamer p.86 Tip Cleaner ST-30 p.88
HAND TOOLS

KS-30H KS-40H Tip Cleaner ST-30 p.88 Heat Clip H-1S p.87

Heat Resistant Cap Recommended Stand Heat Clip H-1S p.87 Soldering Paste BS-10 p.92
TQ-CAP ST-11

48
 SYSTEM
SOLDERING
10 to 20 times longer life RoHS The goot Red Tips are genuine, long-life replacement tips.

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
Made of iron-plated copper, coated with aluminum. 10 to
than normal copper tips. 20 times longer life than normal copper tips. Hi-precision Copper
Iron

processed tips achieve extremely accurate soldering work. The

RED TIPS / BLACK TIPS goot Black tips are made of copper, iron plated, and covered
Pre-solder

R/RD/RB series
Aluminum
with heat resistant coating.

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

Tip Applicable Model List
SPEC MODEL TYPE DIA. LENGTH APPLICABLE MODEL TIP SHAPES
RB-475B B φ4 mm 75 mm KYP-60, KYP-70 A TYPE
Black Tip RB-680B B φ6 mm 80 mm KX-60R, KS-60R
R-48B B
R-48BC BC CA-30/40R B TYPE
R-48C C KS-20R/30R/40R
φ4 mm 75 mm
R-48D D KYP-60, KYP-70
R-48SB SB KX-20R, KX-30R, KX-40R
BC TYPE
R-48SC SC

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

R-6B B
R-6BC BC C TYPE
R-6C C KS-60R
φ6 mm 80 mm
R-6D D KX-60R
Red Tip R-6SB SB
D TYPE
R-6SC SC
RD-67B B
RD-67BC BC KS-80R
φ6-7 mm 83 mm SB TYPE
RD-67C C KX-80R
RD-67D D
RD-68B B
SC TYPE
RD-68BC BC KS-100R
φ6-8 mm 88 mm
RD-68C C KX-100R
RD-68D D

SOLDER POTS
File reshaping available. RoHS
COPPER TIPS
T series

PRODUCTS
SURFACE MOUNT / SMT
Tip Applicable Model List
SPEC MODEL TYPE DIA. LENGTH APPLICABLE MODEL
T-13A A φ13 mm 115 mm HP-150
Copper Tip T-16A A φ16 mm 120 mm HP-200
T-19A A φ19 mm 135 mm HP-300

DESOLDERINGS
Tip Size Table Tip Size Table
TYPE R-48 R-6 RD-67 RD-68 TYPE T-13 T-16 T-19
b a 0.5 0.8 0.6 0.6 b
a 2 3 3
φc
Ra c
B b 9 12 15 17 A b 20 25 30
SOLDERING
ACCESSORIES
a

c 7 10 10 10 c 13 16 19
b
a 1.2 1.6 1.5 1.5
BC b 9 12 15 17 During soldering, the flux may cause deformation or holes to
a

c゜ c 45 45 45 45 appear in the copper tip. Please use a file to reshape the tip.
b a 4 6 7 8
MATERIALS
SOLDERING WORK HEATED TOOLS

C b 7 10 10 12
φa

c゜ c 45 45 45 45
a
c a 1 1.2 1 1
D b b 3.2 4.2 4 4
c 13 25 26 27
b
a 0.3 0.3 − −
Ra
φc

SB b 14 18 − −
c 2 3 − −
b a 2 3 − −
SC φa b 14 18 − −
c゜ c 45 45 − −
HAND TOOLS

49
 NICHROME HEATER SOLDERING IRONS/GAS-POWERED SOLDERING IRONS
SOLDERING
SYSTEM

High thermal-efficiency brass tip. RoHS Take high power outdoors. RoHS
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

GAS-POWERED SOLDERING IRON GAS-POWERED SOLDERING IRON

GP-101S GP-501 PORTASOL SUPER PRO
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

lCompact gas soldering iron. Heats quickly. Takes only

30 seconds from ignition until soldering. lControls
equivalent power of 10-60 W with the temperature lHeats quickly. Takes only 30 lOperates approx. 45 minutes
adjuster (at max temperature 480°C). seconds from ignition until between refills (when used
NOTE: Fill with gas before use. soldering. Controls equivalent at max. temperature as a
power of 25-125 W with the soldering iron).
temperature adjuster. lOne-handed, one-touch
SPECIFICATIONS
lCan be used as a blow torch ignition switch.
Model GP-101S
Ignition System Flint-type ignition system by removing the tip. With
Combustion System Gas Heating System optional tips, do soldering
Gas Type Butane lighter gas work for large metal or
Max. Temp. Output Soldering Iron: 480˚C
precision PCBs, or use as a
Refill Time 3s
Operation Time Per Refill Approx. 45 mins. ( with temp.set at max.) hot knife or a hot air tool.
Length 157 mm
Weight 43 g
SOLDER POTS

NOTE: Fill with gas before use.

REPLACEMENT TIPS
GP-101T-1C GP-101T-2.4C GP-101T-3.2C SPECIFICATIONS
36 36 36
Model GP-501
SURFACE MOUNT / SMT

Ignition System Piezo electricity ignition system

2.4

3.2
1.0

Standard
Combustion System Gas Heating System
Gas Type Butane lighter gas
PRODUCTS

GP-101T-4.8C GP-101CU
580°C (Soldering Iron)
36
34 Max. Temp. Output 1300°C (Blow Torch)
625°C (Hot Air)
φ7
φ4.8

Refill Time 20 s
DESOLDERINGS

Operation Time Per Refill Approx. 45 mins. (for soldering)

Length 223 mm
Weight 147 g

REPLACEMENT TIPS
ACCESSORIES

GP-501RT-1C GP-501RT-2.4C GP-501RT-3.2C

SOLDERING

40 40 40
2.4

3.2
1.0

Standard
SOLDERING WORK

GP-501RT-4.8C GP-501RT-1D GP-501RT-2.4D

40 40 40
MATERIALS

φ1.0

φ2.4
4.8

GP-501RT-3.2D GP-501RT-4.8D GP-501CU

40
40 40
HEATED TOOLS

9.0
φ3.2

φ4.8

Hot Knife
GP-501HT
26
φ5.5
HAND TOOLS

Hot Air

Long-life iron-plated tips.

50
 SYSTEM
SOLDERING
Piezo ignition, compact type. RoHS A set of soldering iron, 3 tips, cleaner, RoHS
stand, and case.

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
GAS-POWERED SOLDERING IRON GAS-POWERED SOLDERING IRON SET
GP-510 PORTASOL PRO PIEZO GP-510SET PORTASOL PRO PIEZO SET

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER
lHeats quickly. Takes only at max. temperature as a
30 seconds from ignition soldering iron). lControls e qui v alent p ower o f 15-75 W w ith the
until soldering. Controls lOne-handed, one-touch temperature adjuster. lReplacement tip converts it to a hot
equivalent power of 15-75 air tool.
ignition switch.
W with the temperature NOTE: Fill with gas before use.
adjuster.
lOptional tip converts it to
a hot knife or other hot air
tools.
lOperates approx. 45 minutes
between refills (when used
Hot air Soldering 2.4 mm Soldering 1.0 mm

NOTE: Fill with gas before use. B y c onne c t ing t he INCLUDED ITEMS

SOLDER POTS
enclosed shrink tip, Soldering iron, 2 Soldering tips (2.4 mm, 1 mm), Hot air
SPECIFICATIONS shrink tube processing tip, Tip cleaner, Iron stand, and Case
is easy.
Model GP-510
Ignition System Piezo electricity ignition system
SOLDERING IRON 2 soldering tips: 1 mm and 2.4 mm. Ideal for repair of

PRODUCTS
SURFACE MOUNT / SMT
Combustion System Gas Heating System
Gas Type Butane lighter gas Max tip temperature 580°C PCBs, communication cables, stained glass, models,
580°C (Soldering Iron) vehicles, ships, and antennas.
Max. Temp. Output
625°C (Hot Air) HOT AIR TOOL Ideal for wiring heat-shrink-tube, vinyl-chloride
Refill Time 20 s welding, and applying cream solder.
Max temperature 625°C
Operation Time Per Refill Approx. 45 mins. (for soldering)
Length 175 mm

DESOLDERINGS
Weight 65 g SPECIFICATIONS
Model GP-510SET
REPLACEMENT TIPS Ignition System Piezo electricity ignition system
GP-510RT-1C GP-510RT-2.4C GP-510RT-3.2C Combustion System Gas Heating System
26 26 26 Gas Type Butane lighter gas
SOLDERING
ACCESSORIES

580°C (Soldering Iron)

Max. Temp. Output
2.4

3.2
1.0

625°C (Hot Air)

Standard
Refill Time 20 s
GP-510RT-4.8C GP-510RT-1D GP-510RT-2.4D Operation Time Per Refill Approx. 45 mins. (for soldering)
26 26 26 Length 175 mm
MATERIALS
SOLDERING WORK HEATED TOOLS

Weight 65 g
φ2.4
φ1.0
4.8

GP-510RT-3.2D GP-510RT-4.8D GP-510CU TIPS INCLUDED IN SET

26 26 26
Replacement tips are interchangeable with GP-510.
φ3.2

φ4.8

8.0

GP-510RT-1C GP-510RT-2.4C GP-510HT

Hot Knife 26 26 22
GP-510HT GP-510ST
φ6.0
2.4
1.0

37
22
Must be used with the
φ6.0

GP-510HT. GP-510ST
20

Hot Air 37
Must be used with the
Long-life iron-plated tips. GP-510HT.
20

HAND TOOLS

Long-life iron-plated tips.

51
SOLDERING

YOUR BEST TIP

SYSTEM

Custom tips are available. For industrial robots, improved productivity, cost cutting…,
please contact a goot distributor.
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

Tip shape is crucial to soldering quality and efficiency. Here are our main tip shapes, and applicable works.
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

Please refer to this table for your tip selection.

◎ Best ○ Good △ OK × NO

LEAD COMPONENTS SMD OTHERS

DIP, SIP, ICs

Lead wire

Flat IC

Large terminal
Fine lead wire

Narrow area

Large part
Small components
Condenser, Resistor,

Connector, Switch

Small components
Condenser, Resistor,

Small components ,

Small part
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

Spec NOTE

B Type
(Conic)
B ◎ ◎ ◎ ◎ △ △ ○ △ △ ○ △ General purpose

LB ◎ ○ ◎ ○ ○ ○ × ○ × ○ × General purpose, small area

longer slim

BC General purpose, moderately

◎ ◎ ◎ ◎ ○ △ ○ △ △ ○ △
with cut face large area

SB General purpose, small heat

○ ○ ○ ○ ◎ ◎ × ◎ × ◎ ×
fine tip load
1C
C Type
face approx.
1 mm
△ △ △ ○ ◎ ◎ × ◎ ○ ◎ × Small heat load

(with Slant column-cut) 2C

face approx. 2 ○ △ ○ ○ △ △ △ △ ◎ △ △ Moderately large area or harness
mm
SOLDER POTS

3C
face approx. 3 × ○ ○ × × ◎ × ◎ × ○ Large area or harness
mm
4C
face approx. 4 × × × × × ◎ × ◎ × ◎ Large area or large heat load
SURFACE MOUNT / SMT

mm
5C
PRODUCTS

face approx. 5 × × × × × ◎ × ◎ × ◎ Large area or large heat load

mm
0.8D
D tip line width approx. ○ ○ ○ ○ ◎ ◎ × ○ △ ◎ × Small area or small heat load
DESOLDERINGS

Type 0.8 mm
Flathead(-) 1.6D
tip line width approx. ○ ○ ◎ ○ △ ◎ × △ △ ○ × Small area or small heat load
1.6 mm
2D
tip line width approx. ○ ◎ ◎ × ○ △ × ○ △ × Small area or lead wire
ACCESSORIES

2 mm
SOLDERING

2.4D
tip line width approx. × ◎ ◎ × ○ ◎ × ○ × ○ Small area or lead wire
2.4 mm
3.2D
SOLDERING WORK

tip line width approx. × ◎ ◎ × ○ ◎ × ◎ × ◎ Small area or large heat load

3.2 mm
MATERIALS

K Type
(Knife) 5K
× × × × ◎ × × × ◎ × △ For bridges
HEATED TOOLS

width
5 mm
HAND TOOLS

52
SOLDERING LEAD-FREE TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER SOLDER POTS SURFACE-MOUNT / SMT DESOLDERINGS SOLDERING SOLDERING WORK HEATED TOOLS HAND TOOLS

53
SYSTEM TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER PRODUCTS ACCESSORIES MATERIALS
SOLDERING STATIONS
TM-200
TM-100
TM-100SU
TIP THERMOMETER
SOLDERING TESTER

TIP THERMOMETER
SOLDERING TESTER

Sensor Unit
 SOLDERING TESTER / TIP THERMOMETER
SOLDERING
SYSTEM
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

Quick testing. Shorten LONG-LIFE TEMPERATURE SENSOR (PAT.P.) PEAK-HOLD FUNCTION

your routine. RoHS Good for over 200 uses Retains display of the temperature change
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

SOLDERING TESTER SENSOR-LIFE COUNTER ALARM (PAT.P.)

TM-200 to Estimate Operating-life

ONE Multi-Tester measures tip temperature, leak voltage,

and tip-to-ground resistance of soldering irons.
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS
SOLDER POTS
SURFACE MOUNT / SMT
PRODUCTS
DESOLDERINGS

COMPARATOR FUNCTION
Warning lamp & buzzer tell pass-fail result of the set upper-lower limit.
ACCESSORIES
SOLDERING

INDICATED VALUE HOLD FUNCTION (Peak-Hold Function)

With one push, keeps the indicated value displayed.
AUTO ZERO FUNCTION
SOLDERING WORK

Automatically corrects the zero error when measuring Leak Voltage & Earth Resistance.
MATERIALS

SENSOR-LIFE COUNTER ALARM

Estimates operating-life of the sensor.
HEATED TOOLS
HAND TOOLS

54
 SYSTEM
LEAD-FREE SOLDERING
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
■Key Pad ■Unit

➉ Key Pad Red Silicon Washer

Sensor Attaching/Detaching Knob
➇ Terminal Plate

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

Inlet Socket
➃
➈
➀ ➂
➄ ➁
Outlet
➅ Aluminum Mat Power Switch
➆ Sensor Connecting Pin Ground Terminal

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

➀ MODE Changer ➂ PEAK HOLD Button ➅ COMPARATOR Result Indicator ➉ Display
(Setting key in setting mode) (Up key in setting mode) ➆ SENSOR ALARM Lamp (Flashes)
➁ AUTO ZERO Button ➃ MODE Lamp ➇ Decimal Point
(Down key in setting mode) ➄ COMPARATOR Lamp (Lights up) ➈ Hold Lamp (Lights up)

Universal Tester!
100-240 V available without transformer. Can be used all
over the world.

SOLDER POTS
Corresponding to wide temperature range *0-700°C (1292°F),
as is needed for soldering work. The tolerance stays in the
range of ±0.5% of the full scale (excluding sensor error). The
sensor's structure makes for easy tip placing. It achieves

PRODUCTS
SURFACE MOUNT / SMT
stable & accurate measuring within seconds, regardless of
shape, or angle of tip. Easily replaceable sensor.
*0-700°C is the range with (optional) sensor probe TM-100SP. With the
standard sensor TM-100S, measurable 0-500°C (932°F).
SPECIFICATIONS

DESOLDERINGS
Model TM-200
Voltage 100-240 V AC 50/ 60 Hz
Input Current 7A
Dimensions 185 (W) × 58 (H) × 160 (D) mm (w/o cord)
REPLACEMENT PARTS / OPTIONS
Weight Approx. 1 kg (w/o cord)
SOLDERING
ACCESSORIES

Sensor (3pcs.) Sensor Probe (1pc.) Resolution 1°C

TM-100S TM-100SP
Measuring Sensor TM-100S: 0-500°C(32-932°F)
Temperature
Sensor Unit Terminal Plate Range Probe TM-100SP: 0-700°C(32-1292°F)
TM-100SU TM-200P Accuracy 0-500°C : ± 3° 501-700°C : ± 4°C
MATERIALS
SOLDERING WORK HEATED TOOLS

0-99.9 mV: 0.1 mV

Resolution
TM-100SU TM-100S 100-200 mV: 1 mV (auto range)
Voltage Measuring
0-200 mV
Range
Accuracy ±(5% of reading value + 1dgt)
Resolution 0-99.9 Ω : 0.1 Ω 100-200 Ω : 1 Ω (auto range)
Measuring
Resistance 0-200 Ω
Range
Accuracy ± (5% of reading value + 1dgt)
TM-100SP Operating Environment 0-40°C, 20-85%RH (no condensation)
Sensor Unit TP-100SU. Refer to next page.
Sensor 3 pcs,
Accessories
HAND TOOLS

Earth connecting lead, Fuse, Power Cord, Plug Adapter

55
 SOLDERING TESTER / TIP THERMOMETER
SOLDERING
SYSTEM
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

Quick measuring. Shorten

RoHS
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

your routine.
TIP THERMOMETER
TM-100
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS




  
 Power Switch  Sensor Reset  Peak Hold/Mode Set
 Battery Alarm  Sensor Alarm  Hold ON/OFF

Wide temperature range *0-700°C (1292°F), as is necessary LONG-LIFE TEMPERATURE SENSOR (PAT.P.)
for soldering work. The tolerance stays in the range of Good for over 200 uses
±0.5% of the full scale (excluding sensor error). The sensor's PEAK-HOLD FUNCTION
structure makes for easy tip placing. It achieves stable & Retains display of the temperature change
SOLDER POTS

accurate measuring within seconds, regardless of shape, or SENSOR-LIFE COUNTER ALARM(PAT.P.)

angle of tip. Easily replaceable sensor. to Estimate Operating-life
AUTO-POWER OFF
*0-700°C is the range with (optional) sensor probe TM-100SP. With the Automatically powers off at pre-set period
standard sensor TM-100S, measurable 0-500°C (932˚F).
SURFACE MOUNT / SMT

TM-100S
SPECIFICATIONS
PRODUCTS

Model TM-100
Voltage AA battery LR6 x 4 pcs : 6 V
DESOLDERINGS

Dimensions 83 (W) × 140 (H) × 38 (D) mm

Weight 150 g (w/o battery) TM-100SP
Resolution 1°C
Measuring Sensor TM-100S: 0-500°C (32-932˚F)
Temperature REPLACEMENT PARTS / OPTIONS
Range Probe TM-100SP: 0-700°C (32-1,292˚F)
Sensor (3pcs.) Sensor Probe (1pc.)
ACCESSORIES

Accuracy 0-500°C : ±3°C 501-700°C : ± 4°C

SOLDERING

TM-100S TM-100SP
Operating Environment 0-40°C, 20-85%RH (no condensation)
Sensor 3 pcs
Accessories
AA battery LR6 x 4pcs
SOLDERING WORK
MATERIALS

Compact sensor for ·TM-100 or TM-200 is required

hard-to-reach places. RoHS for TM-100SU to measure tip
temperatures. TM-100SU cannot
be used alone. ·TM-100S sensors
SENSOR UNIT sold separately.
HEATED TOOLS

TM-100SU
Model TM-100SU
Dimensions 64 (W) x 28 (H) x 100 (D) (w/o cord)
Weight 210 g
Cord Length ø4×1.5 m
HAND TOOLS

Compatible Models TM-100, TM-200

56
SOLDERING LEAD-FREE TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER SOLDER POTS SURFACE MOUNT / SMT
SURFACE-MOUNT DESOLDERINGS SOLDERING SOLDERING WORK HEATED TOOLS HAND TOOLS

5757
SYSTEM TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER PRODUCTS ACCESSORIES MATERIALS
SOLDERING STATIONS
PCB-1
POT series
SOLDER POTS
PCB DIPPING HOLDER
SOLDER POTS
 SOLDER POTS
SOLDERING
SYSTEM

Takes medium PCBs.

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

SOLDER POT [cast-iron bath] RoHS LEAD

FREE
POT-400C
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

SPECIFICATIONS
LARGE BATH
For medium-sized PCBs Voltage
Model POT-400C
220-240 V AC 50/ 60 Hz
Power Consumption 4 kW

CAST-IRON BATH Max. Temp.

Set Accuracy
400˚C
±{(1.25% of display temperature)+1°C}
Lead-free solder applicable Heater
Control System
Sheath Heater
PID Control
Power Cord Length 3 m (3 core cord w/o plug)
ACCURATE TEMPERATURE CONTROL
SOLDER POTS

Solder Bath Material Cast Iron

With PID control

Max. Solder Volume 50 kg
Bath Unit 602 (W) × 165(H) × 427 (D) mm
Dimensions Control Unit 175 (W) × 122(H) × 260 (D) mm

DUAL DIGITAL DISPLAY Solder Bath 400 (W) × 60(H) × 300 (D) mm
SURFACE MOUNT / SMT

Weight 43 kg
Shows set-temperature & measured-temperature NOTE: The weight does not include the cord.
PRODUCTS

REPLACEMENT PARTS / OPTIONS

Heater (for Bottom) Heater (for side)
POT-400CHAH POT-400CHBH
DESOLDERINGS

Bath
POT-400CP

Firmly holds the PCB. l Holds the PCB firmly for dipping into the solder pot.
RoHS
ACCESSORIES

PCB DIPPING HOLDER

SOLDERING

PCB-1
SPECIFICATIONS
SOLDERING WORK

Model PCB-1
Material SUS
MATERIALS

Applicable PCB size Up to 250 mm

Length 260 mm
Holder width 55 mm
HEATED TOOLS
HAND TOOLS

58
 SYSTEM
SOLDERING
Accurate temperature control Accurate temperature control

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
with PID control. RoHS with PID control. RoHS
SOLDER POT [Stainless bath] SOLDER POT [Stainless bath]
POT-100C POT-200C

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER
ACCURATE TEMPERATURE CONTROL DUAL DIGITAL DISPLAY ACCURATE TEMPERATURE CONTROL DUAL DIGITAL DISPLAY
With PID control Shows set-temperature & measured-temperature With PID control Shows set-temperature & measured-temperature
EASY HEATER REPLACEMENT EASY HEATER REPLACEMENT
Separated structure of heater and bath Separated structure of heater and bath

Economical and erosion- Economical and erosion-

resistant cast-iron bath. RoHS LEAD
FREE
LEAD
resistant cast-iron bath. RoHS FREE
SOLDER POT [cast-iron bath] SOLDER POT [cast-iron bath]
POT-103C POT-203C

SOLDER POTS
PRODUCTS
SURFACE MOUNT / SMT
ACCURATE TEMPERATURE CONTROL DUAL DIGITAL DISPLAY ACCURATE TEMPERATURE CONTROL DUAL DIGITAL DISPLAY
With PID control Shows set-temperature & measured-temperature With PID control Shows set-temperature & measured-temperature
CAST-IRON BATH EASY HEATER REPLACEMENT CAST-IRON BATH EASY HEATER REPLACEMENT
Lead-free solder applicable Separated structure of heater and bath Lead-free solder applicable Separated structure of heater and bath

SPECIFICATIONS

DESOLDERINGS
Model POT-100C POT-103C POT-200C POT-203C
110-120 V, 220-240 V AC 50/ 60 110-120 V, 220-240 V AC 50/ 60
Voltage 110 V,120 V, 220 V,240 V AC 50/ 60 Hz 110 V,120 V,220 V,240 V AC 50/ 60 Hz
Hz Hz
Power Consumption 440 W 900 W 650 W 1400 W
Max. Temp. 350˚C 450˚C 400˚C 450˚C
SOLDERING
ACCESSORIES

Set Accuracy ±{(1.25% of display temperature)+1°C}

Heater Nichrome Heater Sheath Heater Nichrome Heater Sheath Heater
Control System PID Control
Power Cord Length 1.3 m 1.5 m (3 core cord w/o plug) 1.3 m 1.5 m (3 core cord w/o plug)
Solder Bath Material SUS316 Cast Iron SUS316 Cast Iron
MATERIALS
SOLDERING WORK HEATED TOOLS

Max. Solder Volume Approx. 5.5 kg Approx. 3.5 kg Approx. 9.5 kg Approx. 7 kg
Dimensions 360 (W)×124 (H)×220 (D) mm 450 (W)×124 (H)×220 (D) mm
Solder Bath Dimensions 91(W)×60(H)×135(D) mm 82 (W)×53 (H)×110 (D) mm 180 (W)×60 (H)×130 (D) mm 173 (W)×53 (H)×108 (D) mm
Weight 5kg 8kg 7kg 11 kg
NOTE: The weight does not include the cord.

REPLACEMENT PARTS / OPTIONS

POT-100C Heater POT-200C Heater POT-100C Bath (Stainless) POT-200C Bath (Stainless)
POT-100CH POT-200CH-S POT-100CP POT-200CP
POT-103C Heater POT-203C Heater POT-103C Bath (Cast Iron) POT-203C Bath (Cast Iron)
POT-103CHA POT-203CHA POT-103CP POT-203CP
HAND TOOLS

POT-103CHB POT-203CHB

59
 SOLDER POTS
SOLDERING
SYSTEM

Economical and erosion- lLead-free applicable bath. Per fect for pre-tinning
RoHS LEAD
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

resistant cast-iron bath. FREE of transformer leads or small PCBs. lAccurate PID
SOLDER POT [cast-iron bath] temperature control. (sensor feedback ON/OFF control
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

POT-50C available) lTemperature adjustable up to 500°C. lAssured

temperature control with the digital key-lock function.
ACCURATE TEMPERATURE CONTROL DUAL DIGITAL DISPLAY lSafety housing design.
With PID control Shows set-temperature & measured-temperature
CAST IRON BATH
Lead-free solder applicable SPECIFICATIONS
Model POT-50C
Voltage 110 V-130 VAC 50/ 60 Hz 220 V-240 VAC 50/ 60 Hz
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

Power Consumption 470-610 W 370-430 W

Max. Temp. 500˚C
Heater Ceramic Heater
Control System PID Control
Power Cord Length 1.5 m Inlet type
Solder Bath Material Cast Iron
Max Solder Volume Approx. 850 g
Unit Dimensions 174 (W) × 142 (H) × 28 5(D) mm
Solder Bath Dimensions 50 (W) × 50 (H) × 50 (D) mm
Weight 3kg
NOTE: The weight does not include the cord.

REPLACEMENT PARTS / OPTIONS

Heater Bath
POT-50CH POT-50CP

Temperature control knob SOLDER POT

for optimal dipping. POT-21C/23C/28C
SOLDER POTS

RoHS RoHS LEAD

FREE RoHS LEAD
FREE

POT-21C POT-23C POT-28C

SURFACE MOUNT / SMT
PRODUCTS
DESOLDERINGS

Spatula included. Spatula included. Spatula included.

ACCESSORIES
SOLDERING

lZero-cross control drastically reduces output noise (Time- SPECIFICATIONS

proportioning system). lLED pilot lamp lights when heater is Model POT-21C POT-23C POT-28C
ON. Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz
Power Consumption 130 W
SOLDERING WORK

NOTE: No sensor feedback system, so temperature may fluctuate +/-

Bath Temperature 270−530˚C
approx.10%.
Melting Time (at max. setting) Approx. 10 mins.
MATERIALS

Heater Nichrome Heater

POT-21C POT-23C POT-28C Control System Time Proportioning Control
Suitable for pre-tinning of Lead-free applicable. No Lead-free applicable. Longer Power Cord 1.3m
large terminals, urethane erosion with a ceramic bath. life with a cast-iron bath. Solder Bath Material Stainless Steel Ceramic Cast Iron
HEATED TOOLS

wires, connectors, and large Suitable for pre-tinning of Suitable for pre-tinning of Solder Capacity Approx. 300 g
lead wires. relatively large parts. relatively large parts. Dimensions 90(W)×87(H)×150(D)mm 90(W)×91(H)×150(D)mm 90(W)×89(H)×150(D)mm
Internal Pot Dimensions ø36 × 36 (D) mm ø31 × 39 (D) mm ø34 × 32 (D) mm
REPLACEMENT PARTS / OPTIONS Weight 720 g 800 g
POT-21C/23C/28C Heater POT-21C Bath NOTE: The weight does not include the cord.
POT-21CH POT-21CP
HAND TOOLS

POT-23C Bath POT-28C Bath

POT-23CP POT-28CP

60
SOLDERING LEAD-FREE TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER SOLDER POTS SURFACE MOUNT / SMT
SURFACE-MOUNT DESOLDERINGS SOLDERING SOLDERING WORK HEATED TOOLS HAND TOOLS

6161
SYSTEM TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER PRODUCTS ACCESSORIES MATERIALS
SOLDERING STATIONS
XFC series
XK series
XU series
XPR series
GSR series

XRB series
XHP-110
XST-80
XST-80G
SURFACE-MOUNT/
SMT PRODUCTS

SMT REWORK REPAIR SYSTEM

SOLDERING TWEEZERS UNIT

HOT-AIR REWORK STATIONS

SOLDERING TWEEZERS
HANDPIECE HOLDERS
BOARD HOLDERS

HOT-AIR PENCIL
PREHEATERS

REBALL KIT
 SURFACE-MOUNT / SMT PRODUCTS
SOLDERING
SYSTEM

Equipped with Auto Profile Mode. Handles BGAs, AUTO PROFILE VARIOUS PROFILES AVAILABLE
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

Can be set to the desired profile without a test Up to 19 profiles, each with 5 zones
CSPs and all SMDs using the preheater.
ACCURATE TEMPERATURE CONTROL ON/OFF INTERFACE
HOT-AIR REWORK STATIONS
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

RoHS ANTI LEAD With PID control Controls external preheater

XFC-300/301 STATIC FREE
HAND OPERATION FORCED COOL-DOWN
Heater and vacuum switches on the handpiece On all zones with cool key

lEither Auto profile or Repeat Profile function (PAT.). l5 zone profiles available:PREHEAT 1, PREHEAT 2, PREHEAT 3, REFLOW, and COOL. lUp to
19 profiles* can be saved for each of the 5 zones. lOne profile can be registered for HAND Mode. lAccurate PID temperature control. lHeater and
Vacuum switches located on the handpiece for easy control. lON/OFF interface with Preheater (connection cable optional). lKeypad Lock and Offset
functions. lInstant cool down on all zones by pressing the COOL key.
*separate profiles with specific temperature and time settings can be pre-programmed for each of the 5 Zones
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

Auto-Lift
Function

XFC-301 XFC-300

Nozzles sold separately. Nozzles sold separately.

An economic solution with maximum heat capacity. Auto Cool-Down function to protect the heater.
Handles BGAs, CSPs and all SMDs. Handles QFPs, PLCCs, SOLs.
SOLDER POTS

HOT-AIR REWORK STATION HOT-AIR REWORK STATION

RoHS ANTI LEAD RoHS ANTI LEAD
XFC-210 STATIC FREE XFC-110 STATIC FREE
SURFACE MOUNT / SMT
PRODUCTS
DESOLDERINGS
ACCESSORIES
SOLDERING

Nozzles sold separately. Nozzles sold separately.

ACCURATE TEMPERATURE CONTROL ON/OFF INTERFACE TEMPERATURE CONTROL DIGITAL DISPLAY

SOLDERING WORK

With P temperature control Controls external preheater With ON/OFF control Easy temperature control
VACUUM PICK-UP FLOW METER
MATERIALS

HAND OPERATION FORCED COOL-DOWN

Heater and vacuum switches on the handpiece On all zones with cool key Highly accurate Easy air-flow control
VARIOUS PROFILES AVAILABLE AUTO COOL-DOWN
Up to 19 profiles, each with 5 zones Protects the heater
HEATED TOOLS

l5 zone profiles available: PREHEAT 1, PREHEAT 2, PREHEAT 3, lTemperature management using ON- OFF control. lDigital
REFLOW, and COOL. lUp to 19 profiles* can be saved for each of the temperature display for easy temperature management. lVacuum
5 zones. One profile can be registered for HAND Mode. lAccurate pickup function, Flow meter for easy airflow management. lAuto Cool
P temperature control. lHeater and Vacuum switches located on Down function to protect heater.
the handpiece for easy control. lON/OFF interface with Preheater
(connection cable optional). lKeypad Lock and Offset functions.
lInstant cool down on all zones by pressing the COOL key.
HAND TOOLS

*individual profiles with specific temperature and time settings can be pre-
programmed for each of the 5 Zones

62
 SYSTEM
LEAD-FREE SOLDERING
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
XFC series FEATURES TABLE
FUNCTION XFC-301 XFC-300 XFC-210 XFC-110
Auto-lift* ✓ — — —
5-zone Profiles ✓ ✓ ✓ —

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

Auto Profile Mode ✓ ✓ — —
Normal Profile Mode ✓ ✓ ✓ —
Hand Mode ✓ ✓ ✓ ✓
Saving of Profile Mode and Hand Mode ✓ ✓ ✓ —
PID Control ✓ ✓ P control —
ON/OFF and Vacuum Control on Handpiece ✓ ✓ ✓ —
Interface to Control Preheater ✓ ✓ ✓ —
Keypad Lock, Offset ✓ ✓ ✓ —
Forced Cool-down ✓ ✓ ✓ ✓
Vacuum Pick-up ✓ ✓ ✓ ✓
Digital Display

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

✓ ✓ ✓ ✓
Flow Meter ✓ ✓ ✓ ✓
Auto Cool-down — — ✓ ✓
Ergonomic Handpiece ✓ ✓ ✓ ✓
*Handpiece with removed SMD can be lifted automatically after the reflow process is finished.

SPECIFICATIONS
Model XFC-301 XFC-300 XFC-210 XFC-110
Voltage 220–240 V AC 50/ 60 Hz 220 V, 230 V, 240 V AC 50/ 60 Hz
Power Consumption 400–460 W 470 W
Power Cord Length 1.5 m (3 core cord) Inlet type
Temperature Setting
50–550°C 150–550°C
Range
Insulation Resistance Over 10 MΩ (500 V DC)

Control Unit
Model XFC-301 XFC-300 XFC-210 XFC-110
Output Voltage 220–240 V AC 220 V, 230 V, 240 V AC

SOLDER POTS
Air-flow Meter Equipped
Air-flow Volume 5–25L /min 5–23L /min 5–25L /min
Auto-lift Function Included -
3 (Profile-Flat, Profile-Slope,
Modes 3 (Profile-Normal, Profile-Auto, Hand) 1 (Hand)
Hand)

PRODUCTS
SURFACE MOUNT / SMT
Temperature Profiles 5 Zones (Temperature and Time) −
Profile Memory ( Auto, Normal )×19, HAND×1 ( Flat,Slope)×19, HAND×1 −
Dimensions 200 (W) ×230 (H) ×265 (D) mm 182 (W) ×179 (H)× 263 (D) mm
Weight 7.6 kg ( w/o cord ) 8.4 kg ( w/o cord ) 7.8 kg ( w/o cord )
Handpiece Holder,
Accessory Connection Cable with Preheater, Handpiece Holder, XVCW-SET
XVCW-SET

DESOLDERINGS
Handpiece Unit
Model XFC-301 XFC-300 XFC-210 XFC-110
Voltage 220-240 V AC 220 V, 230 V, 240 V AC
Power Consumption 370-430 W 400 W
Heater Nichrome Heater
SOLDERING
ACCESSORIES

Hose Length between

Handpiece and Control 1m
Unit
Vacuum Pickup Integrated into Handpiece
Length 220 mm (w/o cord)
MATERIALS
SOLDERING WORK HEATED TOOLS

Weight 180 g (w/o nozzle, cord)

REPLACEMENT PARTS / OPTIONS

MODES XFC-301/300 AUTO PROFILE EXAMPLE Heater Vacuum Cup ø6 mm
[TEMP] XFC-100H XVCW-6
NORMAL Create your own profiles for the 5 zones. REFLOW
XFC Heater Pipe Vacuum Cup ø8 mm
Can be set to the desired profile without a XFC-100HP XVCW-8
AUTO test. (PAT.) XFC-301/300 only PREHEAT

Configure temperature settings for

Vacuum Cup Set Vacuum Cup ø10 mm
HAND COOL
manual rework. XVCW-SET XVCW-10

Vacuum Cup
HAND TOOLS

PREHEAT1 PREHEAT2 PREHEAT3 REFLOW COOL

[ TIME ]
φ10 φ8 φ6 (mm)

63
 SURFACE-MOUNT / SMT PRODUCTS
SOLDERING
SYSTEM

XFC Series Optional Nozzles (PAT.)

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

XNSG series (for SO, SOL) XNQG series (for QFP, BQFP)
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

A D A B C D
P/N Applicable Package P/N Applicable Package
inch mm inch mm inch mm inch mm inch mm inch mm
XNSG 4.4 10 0.394 10 0.189 4.8 SO16 XNQG 12 12 0.472 12 0.551 14 0.472 12 0.551 14 QFP64,QFP48,QFP80,BQFP28
XNSG 5.6 13 0.591 15 0.224 5.7 SSOP8T XNQG 14 14 0.591 15 0.677 17.2 0.591 15 0.677 17.2 SQFP100, TQF100
XNSG 7.6 15 0.630 16 0.283 8.2 SOL20/26, TSOP20/24 XNQG 14 20 0.591 15 0.665 16.9 0.827 21 0.906 23 SQFP12, QFP80, QFP100
XNSG 7.6 18 0.748 19 0.283 8.2 TSOP24 XNQG 16 16 0.630 16 0.826 21 0.629 16 0.826 21 BQFP100T25, QFPT63
XNSG 7.6 12.7 0.472 12 0.283 8.2 SOL20, TSOP28 XNQG 17.5 17.5 0.591 15 0.728 18.5 0.591 15 0.728 18.5 BQFP84
XNSG 19 8 0.315 8 0.748 19.0 TSOP32 XNQG 24 24 0.827 21 0.953 24.2 0.827 21 0.953 24.2 BQFP132, FQFP176
XNSG 8.6 18 0.748 19 0.343 8.7 TSOP28/32 XNQG 28 28 1.142 29 1.220 31 1.142 29 1.220 31 QFP128, SQFP208
XNSG 18.5 12 0.591 15 0.728 19.5 TSOP40/48 XNQG 32 32 1.220 31 1.315 33.4 1.220 31 1.315 33.4 BFP184T, FQFP408
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

XNSG 13 28 1.142 29 0.531 13.5 PSOP44 XNQG 37 37 1.220 31 1.457 37 1.220 31 1.457 37 BQFP196
XNSG 4.4 5 0.197 5 0.189 4.8 SO8 XNQG 40 40 1.535 39 1.654 42 1.535 39 1.654 42 BQFP244

XNSG series (for SOJ) XNBG series (for BGA)

A D A
P/N Applicable Package P/N Applicable Package
inch mm inch mm inch mm
XNSG 15 8.2 0.591 15 0.323 8.2 SOJ20
XNBG 8 8 0.393 10 BGA16, BGA25
XNPG series (for PLCC) XNBG 12 12 0.551 14 BGA49, BGA64

A B C D XNBG 13 13 0.590 15 BGA49, BGA64

P/N Applicable Package XNBG 15 15 0.669 17 BGA81, BGA100
inch mm inch mm inch mm inch mm
XNPG 7.3 12.5 0.272 6.9 0.354 9 0.272 6.9 0.551 14 PLCC 7.3 X 12.5 XNBG 17 17 0.748 19 BGA121

XNPG 11.5 11.5 0.394 10 0.512 13 0.394 10 0.512 13 PLCC 28 XNBG 19 19 0.787 20 BGA144, BGA121
XNPG 11.5 14 0.591 15 0.591 15 0.394 10 0.512 13 PLCC 11.5 X 14 XNBG 23 23 0.984 25 BGA169
XNPG 17.5 17.5 0.591 15 0.728 18.5 0.591 15 0.728 18.5 PLCC 44 XNBG 27 27 1.142 29 BGA324, BGA225, BGA289
XNPG 20 20 0.748 19 0.827 21 0.748 19 0.827 21 PLCC 52 XNBG 35 35 1.457 37 BGA529, BGA484
XNPG 25 25 0.945 24 1.024 26 0.945 24 1.024 26 PLCC 68 XNBG 38 38 1.575 40 BGA576, BGA625
XNPG 30 30 1.142 29 1.220 31 1.142 29 1.220 31 PLCC 84 XNBG 40 40 1.654 42 BGA625, BGA676

Custom nozzles are available. Please contact a goot distributor.

XNSG series SO, SOL XNSG series SOJ XNQG series QFP / BQFP For Discrete Components
D D
D
C
SOLDER POTS

62

62

62
A
A

A
B

.0
:3
ID: 2.0 ID: 3.0 ˚
45

ID
XNDG-1 XNDG-2 XNDG-3
XNPG series PLCC XNBG series BGA
SURFACE MOUNT / SMT

D
C A
62

62
PRODUCTS

B
A

Vacuum pick-up cup for ID: 5.5 ID: 7.0

XFC-301/300/210/110
XNDG-4 XNDG-5
DESOLDERINGS

Fixes the XFC series handpiece securely. Secure fixing and micro-adjustment of the XFC series
handpiece.
HANDPIECE HOLDER HANDPIECE HOLDER
XK-1 RoHS XK-2 RoHS
ACCESSORIES
SOLDERING

Example of Setting
SOLDERING WORK
MATERIALS

l Allows micro-adjustment of the XFC series handpiece

HEATED TOOLS

while holding an SMD. Makes mounting work easy.

l Holder for XFC handpiece to attach to XPR-600/1000
preheater. MODEL XK-2
X direction adjustable range 20 mm
Y direction adjustable range 20 mm
MODEL XK-1 Control knob pitch 0.8 mm per one complete turn
Holder : 330(L) x 110(W) x 160(H)mm Holder : 330 (L) x 110 (W) x 196 (H) mm
HAND TOOLS

Dimensions Dimensions
Column : ø28 x 390 mm Column : ø28 x 390 mm
Weight Holder :1.5 kg / Column:480 g Weight Holder : 1.8 kg / Column : 480 g

64
 SYSTEM
SOLDERING
Smooth motion. Easy mounting and removing.

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
XU-1
BOARD HOLDERS
RoHS
XU-1/XU-1S PCB mounting example.

MODEL XU-1 XU-1S

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

Max. PCB size 305 mm x open side
Dimensions 265 (W) × 36 (H) × 265 (D) mm
Extended 400 (W) × 36 (H) × 265(D) mm
Weight 840 g 900 g

XU-1S handles irregularly-shaped PCBs.

XU-1S

Heating up by the large air-output prevents

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

damage to PCBs. Handles medium PCBs.
PREHEATER
RoHS ANTI
XPR-600 STATIC

lCool PCBs with fan mode, reducing process time. l

Instant upgrade when combined with XFC series rework
station. lSensor feedback temperature control. lDigital
display shows setting temperature. lXU series (sold
separately) can be fixed.
XPR-600

High-powered heater. Best for preheating

multi-layered PCBs. Handles small multi-layered PCBs.
PREHEATER
RoHS ANTI
XPR-610

SOLDER POTS
STATIC

lSmall preheater with a high-powered heater. lHeating

Hot Air Vent Adjusters
area can be changed to fit the PCB size. lComes with
simple board holder. lAccurate temperature control with

PRODUCTS
SURFACE MOUNT / SMT
PID control. lDigital temperature display.
XPR-610

Large-capacity IR heater prevents damage to PCBs.

Handles large multi-layered PCBs.

DESOLDERINGS
PREHEATER
ANTI
XPR-1000 RoHS STATIC
lLarge heating area quickly provides uniform heat on
large multi-layered PCBs. lPID control achieves precise
temperature control for lead-free solder. lComes with
SOLDERING
ACCESSORIES

anti-warping tool. lInstant upgrade when combined with XPR-1000

XFC series rework station.

SPECIFICATIONS
MATERIALS
SOLDERING WORK HEATED TOOLS

MODEL XPR-600 XPR-610 XPR-1000

Voltage 110–120 V, 220–240 V AC 50/ 60 Hz 220 V, 240 V AC 50/ 60 Hz
Power Consumption 560–650 W, 530–630 W 2,100 W
Power Cord Length 1.5 m (3 core cord) Inlet type 3 m (3 core cord) w/o plug
Heater Nichrome Heater IR
Temperature Control System ON-0FF Control PID Control
Temperature Setting Range 100–300˚C Room temperature–300˚C
Heating Area 58 x 58 mm Min. 10 x 10 mm /Max. 58 x 58 mm 270 x 270 mm
Air Flow (Fan Performance) 0.23 m3 /min 0.23 m3/min －
Recommended Holder XU-1/XU-1S Mini PCB Holder Assy (included) Board Holder (included)
Max. PCB size 305 mm x open side 150 mm x open side 424 x 460 mm (Max.)
Dimensions 266 (W) x 90 (H) x 413 (D) mm 180 (W) x 90 (H) x 256 (D) mm 508 (W) x 145 (H) x 610 (D) mm
HAND TOOLS

Weight 5.1 kg 2.8 kg 16.6 kg

65
 SURFACE-MOUNT / SMT PRODUCTS
SOLDERING
SYSTEM

For large packages, large boards, and multi-layered Handles BGAs, CSPs, QFPs, and all SMDs.
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

PCBs. Handles BGAs, CSPs, QFPs, and all SMDs.

SMT REWORK REPAIR SYSTEM SMT REWORK REPAIR SYSTEM
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

GSR-302 RoHS GSR-301/300 RoHS

TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

SYSTEM CONFIGURATION Nozzles sold separately. SYSTEM CONFIGURATION Nozzles sold separately.
ITEM GSR-302 ITEM GSR-301 GSR-300
Preheater XPR-1000 Preheater XPR-600 XPR-600
Hot-Air Rework Station XFC-301 Hot-Air Rework Station XFC-301 XFC-300
Handpiece Holder XK-2 Handpiece Holder XK-2 XK-2
Board Holder Included with XPR-1000 Board Holder XU-1 XU-1

For large packages, large boards, and multi-layered Handles BGAs, CSPs, QFPs, and all SMDs.
PCBs. Handles BGAs, CSPs, QFPs, and all SMDs.
SMT REWORK REPAIR SYSTEM SMT REWORK REPAIR SYSTEM
GSR-212 RoHS
GSR-210 RoHS
SOLDER POTS
SURFACE MOUNT / SMT

SYSTEM CONFIGURATION Nozzles sold separately. SYSTEM CONFIGURATION Nozzles sold separately.
PRODUCTS

ITEM GSR-212 ITEM GSR-210

Preheater XPR-1000 Preheater XPR-600
Hot-Air Rework Station XFC-210 Hot-Air Rework Station XFC-210
DESOLDERINGS

Handpiece Holder XK-2 Handpiece Holder XK-2

Board Holder Included with XPR-1000 Board Holder XU-1

Handles QFPs, SOLs, and

discrete components.
ACCESSORIES
SOLDERING

SMT REWORK REPAIR SYSTEM

GSR-110
SOLDERING WORK

RoHS
MATERIALS
HEATED TOOLS

SYSTEM CONFIGURATION Nozzles sold separately.

ITEM GSR-110
Preheater XPR-600
HAND TOOLS

Hot-Air Rework Station XFC-110

Handpiece Holder XK-1
Board Holder XU-1

66
SOLDERING LEAD-FREE TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER SOLDER POTS SURFACE MOUNT / SMT DESOLDERINGS SOLDERING SOLDERING WORK HEATED TOOLS HAND TOOLS
SYSTEM TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER PRODUCTS ACCESSORIES MATERIALS

67
SOLDERING STATIONS
XU-1S
XPR-1000
XPR-600

BOARD HOLDERS p.65

PREHEATERS p.65

XU-1
XPR-610

XK-2
XFC-300

XFC-110
p.62
HOT-AIR REWORK STATIONS

p.64
HANDPIECE HOLDERS

XK-1
XFC-301

XFC-210
 SURFACE-MOUNT / SMT PRODUCTS
SOLDERING
SYSTEM

MULTIFUNCTION TWEEZERS UNIT

Speedy and accurate reworking of chip parts. Calibration, Sleep, Keylock, etc..
RoHS ANTI LEAD
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

STATIC FREE

SOLDERING TWEEZERS TIP REPLACEMENT WITHOUT TOOLS

SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

Easy to replace a hot tip without any other tools.

XST-80
GRIP WITH INTEGRATED TIP
Allows less deviation of both tips.

ERGONOMIC GRIP DESIGN

Prevents fatigue
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

TIp (Tip cartridge) not

included

* The station unit for the XST-80 is our Lead-

Free Soldering Station RX-802AS

CALIBRATION SERVICES
We provide calibration and/or
certification for a fee.

Multifunction tweezers unit

SOLDER POTS

Equipped with intelligent function [Calibration (PAT.), Sleep

function (PAT.), Keylock function (PAT.)].
SPECIFICATIONS RX-822AS can use both soldering unit and tweezers
simultaneously.
SURFACE MOUNT / SMT

Model XST-80 (Control Unit,Tweezers Unit Grip)

Voltage 110 V, 120 V, 220 V, 230 V, 240 V AC 50/ 60 Hz Ergonomic grip design
Power Consumption 80 W Stroke adjustment for handling various sizes of parts. (PAT.P)
PRODUCTS

Power Cord Length 1.2 m

Temperature Setting Range 50–450°C
Grip with integrated tip
Ripple temperature ±5˚C (unloaded) High-accuracy design with minimum tip deviation. Easy
Insulation Resistance Over 100 MΩ (500 V DC) replacement of hot tips without any other tools.
DESOLDERINGS

Accessories Soldering iron stand ST-28

Control Unit
Output Voltage 24 V AC Soldering Tweezers Unit Soldering-Tweezers Stand
Dimensions 115 (W) x 98 (H) x 146 (D) mm XST-80G ST-28
Weight 1.8 kg (w/o cord )
ACCESSORIES
SOLDERING

Grip Unit
Voltage/Consumption 24 V AC / 72 W
Heater Nichrome heater
Ground Resistance Less than 2 Ω
SOLDERING WORK

Leak Voltage Less than 2mV

Cord Length 1.2 m Tip cartridge (This is not included.)
MATERIALS

Length 120 mm ( w/o cord bushing, with tip cartridge)

28
ø4.1

Weight 48 g ( w/o cord, with tip cartridge)

Equivalent to IPC/EIA J-STD-001C
HEATED TOOLS

REPLACEMENT PARTS / OPTIONS

Soldering Unit
XST-80G
Soldering Iron Stand Sponge
ST-53SP
Soldering Iron Stand Cleaner
HAND TOOLS

ST-40BW
For replacement tips, refer to next page.

68
 SYSTEM
SOLDERING
Speedy and accurate reworking of chip parts MULTIFUNCTION TWEEZERS UNIT
SOLDERING TWEEZERS UNIT Calibration, Sleep, Keylock, etc..

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
(Tweezers unit grip only) RoHS ANTI LEAD
STATIC FREE
TIP REPLACEMENT WITHOUT TOOLS
XST-80G Easy to replace a hot tip without any other tools.
For use with

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

GRIP WITH INTEGRATED TIP
RX-822AS/852AS/802AS/812AS. Allows less deviation of both tips.
Calibration (PAT.) , Sleep function (PAT.), Keylock ERGONOMIC GRIP DESIGN
function (PAT.) are available.
RX-822AS can use both soldering unit and
Prevents fatigue
tweezers simultaneously.

Tip (Tip cartridge) not

included

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

High-accuracy design with minimum tip deviation
for variety of chip parts.

Soldering Tweezers Unit only.

(Tip cartridge not included in XST-80G.)

APPLICABLE MODELS - SAMPLE CONFIGURATION

SOLDER POTS
2 soldering irons can be used.
p.20 p.22 p.24 p.18

PRODUCTS
SURFACE MOUNT / SMT
TEMPERATURE-CONTROLLED, LEAD-FREE TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED
DUAL-PORT SOLDERING STATION LEAD-FREE SOLDERING STATION LEAD-FREE SOLDERING STATION

RX-822AS RX-852AS RX-802AS/RX-812AS

DESOLDERINGS
When you use the soldering iron stand ST-21 or ST-27 with XST-80G, the front opening ST-28MS for the Soldering
Tweezers is required (sold separately).

SPECIFICATIONS REPLACEMENT PARTS / OPTIONS

SOLDERING
ACCESSORIES

Model XST-80G (Tweezers Unit Grip) Soldering Iron Stand

ST-28
Voltage/Consumption 24 V AC / 72 W
Heater Nichrome heater Soldering Iron Stand Sponge
ST-28
Cord Length 1.2 m ST-53SP
Length 120 mm ( w/o cord bushing, with tip cartridge) Soldering Iron Stand Cleaner
MATERIALS
SOLDERING WORK HEATED TOOLS

Weight 48 g ( w/o cord, with tip cartridge) ST-40BW

Front Opening of the Tip Cartridge
ST-28MS
When you use the soldering iron stand ST-21 or ST-27
with XST-80G, please remove its front opening, and
replace with the front opening ST-28MS for the tip
cartridge (sold separately).

REPLACEMENT PARTS / OPTIONS Tips/heaters not sold apart from cartridges.

XST-80HRT-0.5 XST-80HRT-0.5NW XST-80HRT-2 XST-80HRT-1 XST-80HRT-1C
90˚
2

1
0.5
0.5

12 12
12
HAND TOOLS

12
1

3 3
3 3 12
3
1.3

1.3
1.3
1.3

1.3

Not solder-plated

69
 SURFACE-MOUNT / SMT PRODUCTS
SOLDERING
SYSTEM

Reball Kit allows replacement

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

of solder balls on a BGA. RoHS

SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

REBALL KIT
XRB series

➀ ➁ ➂

1. Remove the existing solder 2. Set the Guide Plate on the

balls on the BGA chip with base, and hold the BGA with
a s o l d e r in g ir o n a n d a the vacuum source.
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

➃ ➅
➄ desoldering wick.

➀ Metal Mask (Mask Plate included)

➁ Ball Guide (Mask Plate included)
➂ Guide Plate
➃ Base 3. Set the Metal Mask. Use the 4. Mount the Ball Guide. Pour
➄ Tamper spatula to apply the cream the solder balls into the
➅ Spatula solder to all the holes. holes.
➆ Hose (to connect the Base with the vacuum source)

XRB Reball Kits are customized for specific BGAs.

Please send us the technical drawings of your BGA.

Also required to reball components: Hot-air rework

station ( XFC-110/210/300/301), soldering iron,
desoldering wick, cream solder, and solder balls. (Sold
SOLDER POTS

separately.)

After reballing
5. Press the solder balls into 6. Take out the BGA from the
the cream solder with the base, and apply heat.
SURFACE MOUNT / SMT

tamper.
PRODUCTS
DESOLDERINGS
ACCESSORIES
SOLDERING
SOLDERING WORK
MATERIALS
HEATED TOOLS
HAND TOOLS

70
SOLDERING LEAD-FREE TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER SOLDER POTS SURFACE MOUNT / SMT
SURFACE-MOUNT DESOLDERINGS SOLDERING SOLDERING WORK HEATED TOOLS HAND TOOLS

7171
SYSTEM TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER PRODUCTS ACCESSORIES MATERIALS
SOLDERING STATIONS
CP/CPN series
GS series
TP-280AS /200AS

TP-100AS/100
SVS-800AS/580AS/500AS
DESOLDERING PRODUCTS

PORTABLE DESOLDERING GUNS

AUTOMATIC DESOLDERING

DESOLDERING SUCKERS
DESOLDERING WICKS
SERVICE STATIONS

STATIONS
 DESOLDERING PRODUCTS SERVICE STATIONS
SOLDERING
SYSTEM
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

Omnifunctional machine for soldering, INDEPENDENT PUMPS

Desoldering and reworking operate simultaneously
desoldering and reworking.
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

SERVICE STATION
400% MORE SUCTION CAPACITY
RoHS ANTI LEAD With open-valve mechanism
SVS-800AS STATIC FREE
CERAMIC HEATER WITH INTERNAL SENSOR
A wide range for terminals, connectors and flat ICs (soldering & desoldering)
SUPERIOR TEMPERATURE-CONTROL CIRCUIT
To keep the temperature constant during desoldering
ZERO VOLT SWITCH CIRCUIT
Reduces noise during heater ON/OFF
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

REPLACEABLE CARTRIDGE FILTER

Makes changing the filter easy

REWORK UNIT
The temperature can be set to max 550°C.
SOLDER POTS

SOLDERING UNIT
Good for a wide range of soldering work with
70 W heater.
SURFACE MOUNT / SMT

DESOLDERING UNIT
PRODUCTS

Instant desoldering with open-valve mechanism.

(Please refer to the next page.)

INDIVIDUAL POWER SWITCHES

DESOLDERINGS

Along with the main power switch, there

are switches for soldering, desoldering, and
reworking.
ACCESSORIES
SOLDERING

Nozzles sold
separately.
SOLDERING WORK
MATERIALS
HEATED TOOLS

ST-76 soldering iron stand

(included)
HAND TOOLS

72
 SYSTEM
SOLDERING
PRODUCT SPECIFICATIONS / FUNCTIONS

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
SUCTION CAPACITY COMPARISON
The arrow indicates solder residue.
SVS-500AS SVS-800AS

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

SPECIFICATIONS
MODEL SVS-800AS
DESOLDERING UNIT SOLDERING UNIT REWORK UNIT
Voltage 220-240 V AC 50/ 60 Hz
Power Consumption 670-760 W

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

Power Cord Length 1.5 m Inlet type
Temp. Desoldering Unit 250−450˚C
OPEN-VALVE MECHANISM Setting Soldering Unit 200−480˚C
Two-stage trigger switch (PAT.P) Range Rework 150-550℃
Insulation Resistance Over 10 MΩ (500 V DC)
Vacuum Pump System Diaphragm system
Step 1 Vacuum - 0.08 MPa (-600 mmHg)
Pulling the trigger (lightly) activates the first
stage switch. The pump starts, and the air
Air Flow 5-25L /min
pressure decreases in the vacuum chamber. Trigger Accessories Cleaning pin TP-100CP-13 / Soldering iron stand ST-76
Total Weight 9.3 kg
Step 2
Next, pulling the trigger fully activates the First stage
second stage. The open-valve will open, and switch
the solder is sucked up at once by the
negative pressure in the vacuum chamber.

CONTROL BOX
Solder Output Voltage 220-240 V AC
Dimensions 405 (W) × 240 (H) × 235 (D) mm
Pull trigger Open-valve Weight 8.4 kg (w/o cord, hose )

SOLDER POTS
fully mechanism
DESOLDERING UNIT
Input Voltage/Power Consumption 220-240 V AC / 85 W
Pump Heater Ceramaic Heater
Negative Cord Length 1.2 m
pressure

PRODUCTS
SURFACE MOUNT / SMT
Dimensions 220 x 155 mm
Weight 250 g (w/o cord, hose )
Vacuum
chamber Standard Nozzle TP-100N-S5

SOLDERING UNIT
TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES Input Voltage/Power Consumption 220-240 V AC / 70 W
Ground Resistance Less than 2 Ω

DESOLDERINGS
Soldering Unit Desoldering Unit Leak Voltage Under 2 mV
（℃）500 （℃）
500 Heater Ceramic heater
Cord Length 1.2 m
Nozzle temp.

400 400
Work (Set at 450°C)
190 mm (with PX-2RT-B w/o cord bushing)
Tip temp.

300
Work (Set at 400°C) Length
300
Weight 70 g (with PX-2RT-B w/o cord )
200 200
Standard Tip PX-2RT-B
SOLDERING
ACCESSORIES

100 100

0
1 2 3 4 5
0
2 4 6 8 10 REWORK UNIT
（min.） （min.）
Input Voltage/Power Consumption 220-240 V AC / 370-430 W
Vaccum Degree Chart
Solder melted consecutively on 5 mm-dia600
land. Approx. 2 s / land. Heater Nichrome Heater
（mmHg）

(with PX-2RT-B tip, TP-100N-10 nozzle) 500

Hose length between
1m
MATERIALS
SOLDERING WORK HEATED TOOLS

400 Handpiece and Control Unit

The open-valve allows Vacuum300
pressure compared with Length 220 mm (w/o cord)
the device to reach vac- other goot
200 models Weight 180 g (w/o nozzle, cord)
(mmHg)
uum pressure of -0.06MP -760
100
This machine does not have vacuum pickup function.
(approx.-450 mmHg) in SVS-800AS
SVS-580AS
0
0.1 0.2 0.3 0.4 0.5
（sec.）
only 0.1second. (about 4
For replacement tips, nozzles, and optional parts, refer to p.64 & p. 79
times faster than our SVS- -380
500AS).
SVS-500AS

0
0.1 0.2 0.3 0.4 0.5 0.6 0.7 (sec.)
HAND TOOLS

73
 DESOLDERING PRODUCTS SERVICE STATIONS
SOLDERING
SYSTEM

Desoldering in an instant, with reduced solder residue! Combines

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

desoldering gun and temperature-controlled soldering iron in one unit.

400% MORE SUCTION CAPACITY
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

SERVICE STATION With open-valve mechanism

RoHS ANTI LEAD
SVS-580AS STATIC FREE
CERAMIC HEATER WITH INTERNAL SENSOR
A wide range for terminals, connectors and flat ICs
SUPERIOR TEMPERATURE-CONTROL CIRCUIT
To keep the temperature constant during desoldering
ZERO VOLT SWITCH CIRCUIT
Reduces noise during heater ON/OFF
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

REPLACEABLE CARTRIDGE FILTER

Makes changing the filter easy

SUCTION CAPACITY COMPARISON

The arrow indicates solder residue.
SVS-500AS SVS-580AS

OPEN-VALVE MECHANISM SPECIFICATIONS

Two-stage trigger switch (PAT.P)
MODEL SVS-580AS
Step 1 Voltage 110 V,120 V, 220-240 V AC 50/ 60 Hz
Pulling the trigger (lightly) activates the first
200 W (110 V,120 V)
stage switch. The pump starts, and the air
Trigger Power Consumption
pressure decreases in the vacuum chamber. 270-300 W (220-240 V)
Power Cord Length 1.5 m
Step 2 Temperature Desoldering Unit 250−450˚C
Next, pulling the trigger fully activates the First stage Setting Range Soldering Unit 200−480˚C
second stage. The open-valve will open, and switch
the solder is sucked up at once by the
Insulation Resistance Over 100 MΩ (500 V DC)
Vacuum Pump System Diaphragm system
SOLDER POTS

negative pressure in the vacuum chamber.

Vacuum - 0.08 MPa (-600 mm Hg)
Cleaning pin TP-100CP-13
Solder Accessories
Soldering iron stand ST-76
Total Weight 4.0 kg (w/o cord )
SURFACE MOUNT / SMT

Pull trigger Open-valve

fully mechanism
CONTROL BOX
Output Voltage 110 V,120 V, 220-240 V AC
PRODUCTS

Dimensions 205 (W) x 170 (H) x 160 (D) mm

Pump
Negative Weight 3.6 kg (w/o cord, hose )
pressure
DESOLDERING UNIT
DESOLDERINGS

Vacuum Input Voltage/Power Consumption 110 V,120 V, 220-240 V AC 85 W

chamber
Heater Ceramaic Heater
Cord Length 1.2 m
TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES Dimensions 220 x 155 mm
Weight 250 g (w/o cord, hose )
Soldering Unit Desoldering Unit
（℃）500 （℃）
500
Standard Nozzle TP-100N-S5
ACCESSORIES
SOLDERING

Nozzle temp.

400 400
Work (Set at 450°C)
SOLDERING UNIT
Tip temp.

300
Work (Set at 400°C)
300
Input Voltage/Power Consumption 110 V,120 V, 220-240 V AC 70 W
200 200
Ground Resistance Less than 2 Ω
100 100 Leak Voltage Under 2mV
SOLDERING WORK

0
1 2 3 4 5
0
2 4 6 8 10
Heater Ceramic heater
（min.） （min.） Cord Length 1.2 m
MATERIALS

Vaccum
Solder melted consecutively on 5 mm-dia land. Degree
Approx. 2 Chart
s / land. (with Length 190 mm (with PX-2RT-B w/o cord bushing )
（mmHg）

600
PX-2RT-B tip, TP-100N-10 nozzle) Weight 70 g (with PX-2RT-B w/o cord )
500
400
Standard Tip PX-2RT-B
The open-valve allows Vacuum pressure compared with
other goot
300
models
the device to reach vac-
HEATED TOOLS

(mmHg) 200 For replacement tips, nozzles, and optional parts, refer to p. 79
uum pressure of -0.06MP -760 100

(approx.-450 mmHg) in SVS-580AS

0
0.1 0.2 0.3 0.4 0.5
only 0.1second. (about 4 （sec.）
-380
times faster than our SVS-
500AS). SVS-500AS
ST-76 soldering iron stand
HAND TOOLS

0 (included)
0.1 0.2 0.3 0.4 0.5 0.6 0.7 (sec.)

74
 SYSTEM
SOLDERING
Combines desoldering gun and

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
temperature-controlled soldering iron in one unit.
SERVICE STATION
RoHS ANTI
SVS-500AS STATIC

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER
POWERFUL VACUUM SPECIFICATIONS
Everything from through-hole to multi-layered PCB
MODEL SVS-500AS
CERAMIC HEATER WITH INTERNAL SENSOR Voltage 110 V, 120-130 V, 220-240 V AC 50/ 60 Hz
A wide range for terminals, connectors and flat ICs Power Consumption
200 W (110 V,120-130 V)
270-300 W (220-240 V)
ZERO VOLT SWITCH CIRCUIT Power Cord Length 1.5 m
Reduces noise during heater ON/OFF Temperature Iron Unit 250−450˚C
Setting Range Desoldering Unit 200−480˚C
REPLACEABLE CARTRIDGE FILTER Insulation Resistance Over 100 MΩ(500 V DC)
Makes changing the filter easy Vacuum Pump System Diaphragm system
Vacuum - 0.08 MPa (-600 mmHg)

SOLDER POTS
Cleaning pin TP-100CP-07
Accessories
Soldering iron stand ST-76
Total Weight 4.0kg

SOLDERING UNIT
lStable temperature with excellent heat speed & heat

PRODUCTS
SURFACE MOUNT / SMT
recovery. lGood for a wide range of soldering work, for CONTROL BOX
terminals, connectors, and flat ICs. Output Voltage 110 V, 120-130 V, 220-240 V AC
Dimensions 205 (W) x 170 (H) x 160 (D) mm
DESOLDERING UNIT Weight 3.6kg (w/o cord, hose )
lBuilt-in powerful and compact twin pump. lWhen
DESOLDERING UNIT

DESOLDERINGS
trigger is pulled, the heater heats up forcibly, reducing
Input Voltage/Power Consumption 110-130 V, 220-240 V AC / 85 W
temperature decrease. lAfter trigger release, the pump Heater Ceramic Heater
operates for approx. 0.5 seconds more, reducing solder Cord Length 1.2 m
clogs. Dimensions 220 x 155 mm
Weight 250 g (w/o cord, hose )
TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES Standard Nozzle TP-100N-10
SOLDERING
ACCESSORIES

Soldering Unit Desoldering Unit

（℃）500 （℃）
500 SOLDERING UNIT
Input Voltage/Power Consumption 110-130 V, 220-240 V AC / 70 W
Nozzle temp.

400 400
Work (Set at 450°C)
Ground Resistance Less than 2 Ω
Tip temp.

300
Work (Set at 400°C)
300
MATERIALS
SOLDERING WORK HEATED TOOLS

Leak Voltage Under 2mV

200 200
Heater Ceramic heater
100 100 Cord Length 1.2 m
0
1 2 3 4 5
0
2 4 6 8 10
Length 190 mm (with PX-2RT-B w/o cord bushing)
（min.） （min.） Weight 70 g (with PX-2RT-B w/o cord )
Vaccum Degree Chart Standard Tip PX-2RT-B
（mmHg）

Solder melted consecutively on 5 600

mm-dia land. Approx. 2 s / land. 500

(with PX-2RT-B tip, TP-100N-10 400 For replacement tips, nozzles, and optional parts, refer to p. 79
nozzle) 300
200
100

0
0.1 0.2 0.3 0.4 0.5
（sec.）
HAND TOOLS

ST-76 soldering iron stand

(included)

75
 DESOLDERING PRODUCTS AUTOMATIC DESOLDERING STATIONS
SOLDERING
SYSTEM

New open-valve mechanism achieves unrivalled

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

vacuum power and start-up speed.

400% MORE SUCTION CAPACITY
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

With open-valve mechanism

RoHS ANTI LEAD
TP-280AS STATIC FREE
CERAMIC HEATER WITH INTERNAL SENSOR
A wide range for terminals, connectors and flat ICs
SUPERIOR TEMPERATURE-CONTROL CIRCUIT
To keep the temperature constant during desoldering
ZERO VOLT SWITCH CIRCUIT
Reduces noise during heater ON/OFF
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

REPLACEABLE CARTRIDGE FILTER

Makes changing the filter easy

SUCTION CAPACITY COMPARISON

The arrow indicates solder residue.
TP-200AS TP-280AS

OPEN-VALVE MECHANISM SPECIFICATIONS

Two-stage trigger switch (PAT.P) MODEL TP-280AS
Step 1 Voltage 110 V,120 V, 220–240 V AC 50/ 60 Hz
Pulling the trigger (lightly) activates the first 130 W (110 V,120 V)
stage switch. The pump starts, and the air Power Consumption
Trigger 170-200 W (220-240 V)
pressure decreases in the vacuum chamber.
Power Cord Length 1.5 m
Step 2 Temperature Setting Range 250−450˚C
Next, pulling the trigger fully activates the First stage Insulation Resistance Over 100 MΩ(500 V DC)
SOLDER POTS

second stage. The open-valve will open, and switch Vacuum Pump System Diaphragm system
the solder is sucked up at once by the
Vacuum - 0.08 MPa (-600 mmHg)
negative pressure in the vacuum chamber.
Cleaning pin TP-100CP-13
Accessories
Soldering iron stand ST-76
Solder Total Weight Approx. 2.9 kg (w/o cord, hose )
SURFACE MOUNT / SMT

Pull trigger Open-valve CONTROL BOX

fully mechanism Output Voltage 110 V, 120 V, 220–240 V AC
PRODUCTS

Dimensions 95 (W) x 205 (H) x 256 (D) mm

Weight 2.6kg (w/o cord, hose )
Pump
Negative
pressure
DESOLDERING UNIT
DESOLDERINGS

Input Voltage/Power Consumption 110-120 V, 220–240 V AC / 85 W

Vacuum
chamber Heater Ceramic Heater
Cord Length 1.2 m
Dimensions 220 × 155 mm
NOZZLE TEMPERATURE-RECOVERY FEATURES Weight 250 g (w/o hose )
ACCESSORIES

Standard Nozzle TP-100N-S5

SOLDERING

SolderSoldering
（℃）500
melted Unit
consecutively on 5 （℃）
500
Desoldering Unit
mm-dia land. Approx. 2 s / land.
Nozzle temp.

(with TP-100N-10 nozzle)

400 400
Work (Set at 450°C)
Tip temp.

300
Work (Set at 400°C)
300
For replacement tips, nozzles, and optional parts, refer to p. 79
SOLDERING WORK

200 200

100 100
MATERIALS

0 0
1 2 3 4 5 2 4 6 8 10
（min.） （min.）
Vaccum Degree Chart
The open-valve allows Vacuum
600 pressure compared with
（mmHg）

the device to reach vac- goot models

other500
HEATED TOOLS

(mmHg)
uum pressure of -0.06MP -760
400
300
(approx.-450 mmHg) in TP-280AS
SVS-580AS
200
only 0.1second. (about 100
4 times faster than our -380
0
0.1 0.2 0.3 0.4 0.5
TP-200AS). TP-200AS
SVS-500AS （sec.）
HAND TOOLS

0
ST-76 soldering
0.1 0.2 0.3 0.4 0.5 0.6 0.7 (sec.) iron stand
(included)

76
 SYSTEM
SOLDERING
Perfect for desoldering through-hole and

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
multi-layered PCBs.
POWERFUL VACUUM
Everything from through-hole to multi-layered PCB
RoHS ANTI
TP-200AS STATIC
CERAMIC HEATER WITH INTERNAL SENSOR

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

A wide range for terminals, connectors and flat ICs
ZERO VOLT SWITCH CIRCUIT
Reduces noise during heater ON/OFF
REPLACEABLE CARTRIDGE FILTER
Makes changing the filter easy

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

POWERFUL VACUUM SPECIFICATIONS
l Built-in powerful and compact twin pump. lWhen trigger MODEL TP-200AS
is pulled, the heater heats up forcibly, reducing temperature Voltage 110 V,120-130 V, 220–240 V AC 50/ 60 Hz
decrease. lAfter trigger release, the pump operates for 130 W (110 V,120-130 V)
Power Consumption
170-200 W (220-240 V)
approx. 0.5 seconds more, reducing solder clogs. Power Cord Length 1.5 m
Temperature Setting Range 250−450˚C

SOLDER POTS
Insulation Resistance Over 100 MΩ (500 V DC)
Vacuum Pump System Diaphragm system
Vacuum - 0.08 MPa (-600 mmHg)
Cleaning pin TP-100CP-07
Accessories
Soldering iron stand ST-76

PRODUCTS
SURFACE MOUNT / SMT
Weight Approx. 2.9 kg (w/o cord, hose )
NOZZLE TEMPERATURE-RECOVERY FEATURES CONTROL BOX
Output Voltage 110 V,120-130 V, 220–240 V AC
Soldering Unit Desoldering Unit
Solder
（℃）500 melted consecutively on （℃）
500 Dimensions 95 (W) x 205 (H) x 256 (D) mm
5 mm-dia land. Approx. 2 s / land. Weight 2.6kg (w/o cord, hose )
Nozzle temp.

400
(with TP-100N-10 nozzle) 400
Work (Set at 450°C)

DESOLDERINGS
Tip temp.

Work (Set at 400°C)

300 300 DESOLDERING UNIT
200 200 Input Voltage/Power Consumption 110-130 V, 220–240 V AC / 85 W
100 100 Heater Ceramic Heater
0 0
Cord Length 1.2 m
1 2 3 4 5 2 4 6 8 10
（min.） （min.） Dimensions 220 × 155 mm
Vaccum Degree Chart Weight 250 g (w/o cord, hose )
SOLDERING
ACCESSORIES
（mmHg）

600
Standard Nozzle TP-100N-10
500
400
300
200
For replacement tips, nozzles, and optional parts, refer to p. 79
MATERIALS
SOLDERING WORK HEATED TOOLS

100

0
0.1 0.2 0.3 0.4 0.5
（sec.）
HAND TOOLS

ST-76 soldering
iron stand
(included)

77
 DESOLDERING PRODUCTS PORTABLE DESOLDERING GUNS
SOLDERING
SYSTEM

Handy, portable Desoldering Gun with combined

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

temperature-control circuit and desoldering mechanism

SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

PORTABLE DESOLDERING GUNS

RoHS ANTI
TP-100/ 100AS STATIC
TP-100AS

POWERFUL VACUUM
Everything from through-hole to multi-layered PCB
CERAMIC HEATER WITH INTERNAL SENSOR
A wide range for terminals, connectors and flat ICs
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

ZERO VOLT SWITCH CIRCUIT

Reduces noise during heater ON/OFF
REPLACEABLE CARTRIDGE FILTER
Makes changing the filter easy

TP-100/100AS FEATURES
Easy to Use
Compact design with an internal motor, pump, and
temperature-control circuit built into the grip. Portable
and efficient.

Powerful Vacuum Carry case included. Can be set from 250-450°C.

SOLDER POTS

Maximum vacuum of –0.08Mpa (-600 mmHg). Removes

through-hole solder easily.

Variable Temperature Setting

SURFACE MOUNT / SMT

Sensor feedback system allows temperature setting from

250-450°C.
PRODUCTS

Replaceable Cartridge Filter

Makes changing the filter easy.
DESOLDERINGS

Anti-static Model
TP-100AS
SPECIFICATIONS
MODEL TP-100 TP-100AS
Voltage 110–130 V, 220–240 V AC 50/ 60 Hz
ACCESSORIES
SOLDERING

Power Consumption 80 W (110-130 V), 70–75 W (220-240 V)

Power Cord Length 1.5 m
Temperature Setting Range 250–450˚C
Insulation Resistance Over 100 MΩ (500 V DC)
Vacuum Pump System Diaphragm system
SOLDERING WORK

Vacuum - 0.08 MPa (-600 mmHg)

Heater Ceramic Heater
MATERIALS

Standard Nozzle TP-100N-10

Cleaning pin TP-100CP-07/ Filter TP-100F
Accessories Carry case
Heat resistant pipe /Stand Carry case with heat resistant
pipe that allows the gun to be
HEATED TOOLS

Dimensions 225 × 170 mm

Weight 470 g (w/o cord) stored immediately after use.
Also includes stand to rest the
gun.
HAND TOOLS

For replacement tips, nozzles, and optional parts, refer to p. 79

78
 SYSTEM
LEAD-FREE SOLDERING
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
REPLACEMENT TIPS REPLACEMENT PARTS / OPTIONS
SVS-800AS/580AS/500AS
RoHS
PX-2RT-SB PX-2RT-B PX-2RT-BC REPLACEMENT PARTS FOR SVS-800AS/580AS/500AS
15 15 45° 15 *Desoldering Unit for SVS-800AS/SVS-580AS Iron Unit (common for SVS series)
13 12 12
TP-28GAS SVS-50GAS

5
10 4

5
5.
4
5

5.
φ
5.

4
φ2.5

φ
φ

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

Desoldering Unit for SVS-500AS Heater for Soldering Iron

1
.5
R0
TP-20GAS SVS-500H-1
.3
R0

PX-2RT-2BC PX-2RT-3BC PX-2RT-2C Heater for Desoldering Gun Heater Barrel for Soldering Iron
45° 13 TP-100H TQ-77HP(S)
8 45° 13 45° 15
8 13 Heater Barrel for Desoldering Gun Spacer for Soldering Iron
4 5
6

10

5
TP-100HP TQ-77SS
6
φ

5.
φ

φ
2.2

φ2.1
3.2

Collar for Soldering Iron

TQ-77NUT
PX-2RT-3C PX-2RT-4C PX-2RT-5C *TP-28GAS Desoldering Unit is not interchangeable with TP-20GAS
45° 15 (SVS-500, SVS-500AS, SVS-550AS)
13 45° 15 45° 16
10 12
5
5

5
5.
5.

φ
φ
φ

REPLACEMENT PARTS FOR TP-280AS/200AS

φ4
φ3

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

*Desoldering Unit for TP-280AS Desoldering Unit for TP-200AS
PX-2RT-1.6D PX-2RT-2.4D PX-2RT-3.2D TP-28GAS TP-20GAS
15 15 15
12 12 12 Heater Heater Barrel
5

0.5
5

2.2
5.

0.5
5.

3.3 4.2 TP-100H TP-100HP

5.

0.5
φ

φ
φ1.6

φ3.2
φ2.4

*TP-28GAS Desoldering Unit is not interchangeable with TP-20GAS

(TP-200, TP-200AS, TP-250AS)
PX-2RT-4D PX-2RT-5D PX-2RT-5K
15 REPLACEMENT PARTS FOR TP-100/100AS
15 15
90

12
φ4 5.5

0.5 5.1 2
5.

5 1
˚
5

13
φ

Heater Heater Barrel

φ5

45˚ TP-100H TP-100HP

PX-2RT-8S PX-2RT-6E COMMON PARTS

Overall View
13.5 16 Filter
1.2 3 4 37
8

5
φ

Filter Set (3pcs) Steel Wool Only (3pcs)

φ

φ7

TP-100F TP-100UL
PX-2RT-B
Cartridge Set Felt B (10pcs)
TP-100K TP-100RFT
ROUND SOLDER-PLATED TIP Felt Set (3pcs)

SOLDER POTS
PX-2RT-2CR PX-2RT-3CR
TP-100FT

45° 15 Cleaning Pin Vice Cleaning Pin

45° 15
13
13
10 Pin vice body (The drill bit is not included.)
10 ø0.7 mm (for ø0.8 & 1.0 mm nozzle)
5

5
5

5.

4
5.

TP-100PV TP-100CP-07
φ

φ2.1

φ3

PRODUCTS
SURFACE MOUNT / SMT
Standard type
Drill Bit ø0.7 mm ø1.3 mm (for ø1.5 & 2.5 mm nozzle)
TP-100DB-07 TP-100CP-13
PX-2RT-4CR PX-2RT-5CR
Drill Bit ø0.9 mm
45° 45° TP-100DB-09
15 16
12 7
Drill Bit ø1.4 mm
5

6
5.

5
φ
φ

TP-100DB-14
φ5
φ4

Round solder-plated type

Drill Bit ø2.4 mm

DESOLDERINGS
TP-100DB-24
REPLACEMENT NOZZLES
SVS-800AS/580AS/500AS/TP-280AS/TP-200AS/TP-100(AS) RoHS Filter Set TP-100F Felt Set TP-100FT

TP-100N-08 TP-100N-10*2 TP-100N-15

Felt B
20 20
Felt B
φ8.0
φ2.5
φ0.8

20
φ8.0
φ2.5
φ1.5
φ8.0
φ2.5
φ1.0

12 Felt A
SOLDERING

12
ACCESSORIES

12
Steel Wool (3pcs) Felt A (3pcs)
08

15
10

Steel Wool
Cartridge Set TP-100K
TP-100N-25 TP-100N-S1 TP-100N-S5* 1 Cleaning Pin Vice
Cartridge
MATERIALS
SOLDERING WORK HEATED TOOLS

Felt B
20 20 20
φ9.5
φ4.0
φ2.5

φ6.4
φ2.5
φ1.5
φ6.4
φ2.2
φ1.0

12 14 14
Steel
(1pcs)
25

S5
S1

Wool Felt A

TP-100PV
TP-100N-S8
20 77.5
12 Cleaning Pin
20
φ6.4
φ1.6
φ0.8

φ8.0

14
Overall View (Standard)
S8

Iron Unit SVS-800AS, SVS-580AS, SVS-500AS

20 77.5
14
φ6.4

Collar Heater Barrel

Overall View (Slim) Tip Spacer Heater
HAND TOOLS

*1Model SVS-800AS, SVS-580AS, TP-280AS Standard Nozzle : TP-100N-S5

*2Model SVS-500AS, TP-200AS , TP-100(AS) Standard Nozzle : TP-100N-10

79
 DESOLDERING PRODUCTS DESOLDERING WICKS
SOLDERING
SYSTEM
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

RMA base flux.

DESOLDERING WICKS RoHS MSDS
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

CP/CPN series
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

CONVENTIONAL DISPENSER PACK DISPENSER PACK WITH STAINLESS STEEL MOUTH

lHigh-quality desoldering wick with braided copper wire, lCan be used for precision PCBs safely. lErgonomic
saturated with non-chlorine special flux. lCan be used for design will keep your fingers cool.
precision PCBs safely.
SOLDER POTS

MODEL Type Width Length MODEL Type Width Length

CP-1515 Plain Knitting Approx. 1.5 mm CP-15Y Plain Knitting Approx. 1.5 mm
CP-2015 Plain Knitting Approx. 2.0 mm CP-20Y Plain Knitting Approx. 2.0 mm
CP-2515 Plain Knitting Approx. 2.5 mm Approx. 1.5 m CP-25Y Plain Knitting Approx. 2.5 mm Approx. 2m
SURFACE MOUNT / SMT

CP-3015 Plain Knitting Approx. 3.0 mm CP-30Y Plain Knitting Approx. 3.0 mm
CP-3515 Plain Knitting Approx. 3.5 mm CP-35Y Plain Knitting Approx. 3.5 mm
PRODUCTS

ECONOMICAL PACKS OF 10PCS BULK-LENGTH SPOOL

DESOLDERINGS

lWith convenient zipper bag. lContains silica gel to lBargain extra-long wicks with spool. lMakes it easy to
reduce quality degradation. take anywhere.
ACCESSORIES
SOLDERING
SOLDERING WORK
MATERIALS
HEATED TOOLS

MODEL Type Width Length MODEL Type Width Length

CP-1515-10 Plain Knitting Approx. 1.5 mm CP-15B Plain Knitting Approx. 1.5 mm Approx. 30m
CP-2015-10 Plain Knitting Approx. 2.0 mm CP-20B Plain Knitting Approx. 2.0 mm Approx. 30m
CP-2515-10 Plain Knitting Approx. 2.5 mm Approx. 1.5 m CP-25B Plain Knitting Approx. 2.5 mm Approx. 20m
CP-3015-10 Plain Knitting Approx. 3.0 mm CP-30B Plain Knitting Approx. 3.0 mm Approx. 20m
CP-3515-10 Plain Knitting Approx. 3.5 mm CP-35B Plain Knitting Approx. 3.5 mm Approx. 15m
HAND TOOLS

80
 SYSTEM
SOLDERING
HALOGEN-FREE DESOLDERING WICKS CPN SERIES

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
RoHS MSDS ANTI
STATIC

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

l Available in packs of 10 only. MODEL Type Width Length Quantity
CPN-2015-10 Plain Knitting Approx. 2.0 mm

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

l Does not intentionally contain halogens. CPN-3015-10 Plain Knitting Approx. 3.0 mm
Approx. 1.5 m 10pcs/ Pack

l RMA non-wash flux is used. (J-STD-004: ROLO)

l Plain-knitting wick recommended for lead-free
applications with high heat conduction.
l Anti-static case.
l Contains silica gel to reduce quality degradation.
l With convenient zipper bag.
HALOGEN-FREE
Less than 1,000 ppm each of chlorine, bromine, fluorine and
iodine content (JEITA Standards)

Width

SOLDER POTS
Rosin Length 2.0 mm 3.0 mm Quantity
1.5 mm 2.5 mm 3.5 mm
for LEAD-FREE for LEAD-FREE
CPN-2015-10 10
HALOGEN-FREE 1.5 m
CPN-3015-10

PRODUCTS
SURFACE MOUNT / SMT
10
CP-1515 1
CP-1515-10 10
CP-2015 1
CP-2015-10 10
CP-2515 1

DESOLDERINGS
CP-2515-10 10
1.5 m
CP-3015 1
CP-3015-10 10
CP-3515 1
CP-3515-10 10
SOLDERING
ACCESSORIES

1
RMA flux 10
CP-15Y 1
CP-20Y 1
MATERIALS
SOLDERING WORK HEATED TOOLS

2.0m CP-25Y 1
CP-30Y 1
CP-35Y 1
13m 1
15m CP-35B 1
CP-25B 1
20m
CP-30B 1
CP-15B 1
30m
CP-20B 1
HAND TOOLS

81
 DESOLDERING PRODUCTS DESOLDERING SUCKERS
SOLDERING
SYSTEM
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

Manual pumps suck up solder. GS-154

Plunger pumps are light, strong, and economical. RoHS
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

DESOLDERING SUCKERS
GS series
SELF-CLEANING SHAFT
SELF-CLEANING SHAFT PLUNGERngLOCK er FUNCTION To prevent solder clogs
lu
gp
When the plunger is pushed, a pis- The
Pr i m inplunger can be stored inside PLUNGER LOCK FUNCTION
ton extends out the nozzle. This pre- the shaft by pushing it in complete- Portable, compact storage
vents solder build-up. ly, and pressing the vacuum release
button. Compact storage. ANTI-STATIC MATERIAL
er On the nozzle
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

er lung
g gp
lun n
p mi
mi
ng Pri
Pri ea
se
rel
um aft
cu Sh
Va tton
b u GS-158
er RoHS
ng
plu
ng
mi
e
Pri SELF-CLEANING SHAFT
rel
eas
To prevent solder clogs
um ha
ft
cu S
Va tton
bu ANTI-STATIC MATERIAL
GS-100 RoHS On the nozzle

SELF-CLEANING SHAFT
To prevent solder clogs
JUMBO SIZE
Large vacuum capacity
PLUNGER LOCK FUNCTION
Portable, compact storage

SPECIFICATIONS
SOLDER POTS

MODEL GS-100 GS-104 GS-108

GS-104 Color ivoly
RoHS Length 330 mm 275 mm 190 mm
When Stored 240 mm 205 mm −
Weight 89 g 65 g 25 g
SURFACE MOUNT / SMT

SELF-CLEANING SHAFT Diameter ø23 mm ø19 mm ø14 mm

To prevent solder clogs Applicable Nozzle GS-100N GS-108N
PRODUCTS

PLUNGER LOCK FUNCTION

Portable, compact storage MODEL GS-150 GS-154 GS-158
Color Black
Length 330 mm 275 mm 190 mm
DESOLDERINGS

When Stored 240 mm 205 mm −

GS-108 Weight 89 g 65 g 25 g
RoHS Diameter ø23 mm ø19 mm ø14 mm
Applicable Nozzle GS-150N GS-158N
ACCESSORIES

SELF-CLEANING SHAFT
SOLDERING

To prevent solder clogseasy

SOLDERING WORK

REPLACEMENT NOZZLES
MATERIALS

GS-100N GS-108N GS-150N

GS-150 13.5 12.4 13.5

φ2.6
φ3.2

φ3.2

SELF-CLEANING SHAFT
RoHS To prevent solder clogs
HEATED TOOLS

GS-158N
PLUNGER LOCK FUNCTION
Portable, compact storage 12.4
φ2.6

JUMBO SIZE
Large vacuum capacity
HAND TOOLS

ANTI-STATIC MATERIAL
On the nozzle

82
 SYSTEM
LEAD-FREE SOLDERING
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER
SOLDERING ACCESSORIES
AIR PURIFYING FUME VACUUM SS-60
ANTI-STATIC MATS WD-13/130
WRIST STRAPS WS-11/12

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

SURFACE RESISTIVITY METER WA-400
LOW-DUST/ANTI-STATIC GLOVES WG series
SOLDER ASSIST SA-10
PRECISION TWEEZERS TS series
HEAT CLIPS H series
TIP REFRESHER BS-2
TIP CLEANERS ST-30/40/70
SOLDERING IRON STANDS ST-27/28/11

SOLDER POTS
S T - 7 5 / 7 5
V/76/77

PRODUCTS
SURFACE MOUNT / SMT
SURFACE-MOUNT
SOLDER REEL HOLDERS ST-51/52/53
MAGNIFIERS ST-91/92/93
MINI VISE ST-80

DESOLDERINGS
CORE ALIGNMENT TOOLS CD-10
CERAMIC CORE DRIVERS CD series
MAINTENANCE TOOL SETS TL-10/20
SOLDERING
MATERIALS ACCESSORIES
SOLDERING WORK HEATED TOOLS HAND TOOLS

8383
 SOLDERING ACCESSORIES AIR PURIFYING TYPE FUME VACUUM
SOLDERING
SYSTEM
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

For cleaner work environment SUCK AND CLEAN FROM TWO LOCATIONS
AIR PURIFYING TYPE FUME VACUUM with one unit
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

SS-60 EASY FILTER REPLACEMENT

Easy to set up
RoHS
lTwo fume extraction ducts for use at two
separate workstations simultaneously.
*Duct Hose (Optional) required.
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

Pre-Filter
SS-60PF

Pre-Filter Set
SS-60PFS

Main-Filter
SS-60MF

REPLACEMENT PARTS / OPTIONS SPECIFICATIONS

SOLDER POTS

Pre-Filter Filter Set MODEL SS-60

SS-60PF SS-60PFS
Voltage 110-120 V, 220-240 V AC 50／60 Hz
Main-Filter Duct Hose Power Consumption 240 W
SS-60MF SS-60D Noise Level 60dB (at 1m from the unit)
SURFACE MOUNT / SMT

Smoke Exhaust 2 ducts (ø75 mm)

Collection Efficiency 95% 0.3μm
Duct Hose Length ø75 mm x 1.2 m
PRODUCTS

Suction Capacity Max.165 m3/h (single duct operation)

Power Cord Length 1.5 m inlet type
Dimensions 300（W）× 455（H）× 300（D) mm
Weight 16 kg
DESOLDERINGS
ACCESSORIES
SOLDERING
SOLDERING WORK
MATERIALS
HEATED TOOLS
HAND TOOLS

84
 SYSTEM
SOLDERING
SOLDERING ACCESSORIES ANTI-STATIC MATS/WRIST STRAPS
Suitable for assembly rooms (for IC or electrical Avoid electrostatic discharge and

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
components) to prevent static charge. protect sensitive electronic devices.
ANTI-STATIC MATS WRIST STRAPS ANTI
RoHS ANTI
WD-130/WD-13 STATIC
WS-11/12 STATIC

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

lLarger snap with improved durability. lAdjustable band length.

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

l1MΩ resistor in electrical path from person to ground.
SPECIFICATIONS
MODEL Cord Length Cord Material Band Width
WS-11 1.7 m
Polyurethane 20 mm
WS-12 2.8 m

lMatte green. lAvailable for work desks and floors. REPLACEMENT PARTS / OPTIONS
Material/ Surface Resistivity Wrist Band for WS-11 /12 Alligator Clip for WS-11 /12
Model Length Width Thickness Hardness Surface (green) Bottom (black) WS-11-1 WS-11-3

WD-130 10m Coil cord for WS-11 Coil cord for WS-12
Synthtic 107–109 103–105 WS-11-2 WS-12-2
1m 2 mm
Rubber/65 Ω/ sq Ω/ sq
WD-13 2m

Color LED measurement display.

Compact and portable.
Item Model Specifications

SOLDER POTS
Ground Wire Plate WD-1E 50×100 mm/2 pieces / 2m cords SURFACE RESISTIVITY METER
RoHS
Short Plate
Ground Wire Set
WD-1P
WD-1 g
50×100 mm/10 pieces
3.1 m WA-400
Aluminum Tape WD-3020 0.05 mm (T) x 30 mm (W) x 20m (L)
lMeasures the Surface Resistivity [Ω/sq], Resistance to Ground

PRODUCTS
SURFACE MOUNT / SMT
(RTG) [Ω] and Resistance between two points (RTT), of floors, work
surfaces, conductive materials, and anti-static accessories. lCompact
■OPTION Screw
Grounding Cord Connector and powered by single 9 V battery (006P). lMeasurements instantly
Connector
displayed in three-color LED.
Range Classification LED Display

DESOLDERINGS
ø10mm Hole RTT Test Jack Less than 10 5 Ω (Ω/sq) Conductive Green
WD-1E WD-3020 Ground
Measures the Resistance between two
Between 10 6 and 1011 Ω (Ω/ Dispassive Orange
Connector Plate points with two included leads. When
measuring RTT, the Surface Resistivity sq)
How To Use WD-1 g Desk Mat (Ground Wire Set) electrodes on the rear of the unit
More than 10 12 Ω (Ω/sq) Insulative Red
l Make a 10 mm hole in the mat. become inactive.

l Place the connector plate under the hole in the Surface Resistivity
mat. Secure the connector using the screw. Electrodes
l Connect the grounding cord to the connector on RTG Test Surface Resistivity
SOLDERING
ACCESSORIES

the mat. Testing

Jack
Place the meter on
WD-1P l The banana strap used with the WS-11/12 can Measures the
WD-1 g also be connected to the connector on the mat. Resistance to the test surface.
Ground between RTG Test
the Surface (rear Measures the Resis-
electrodes) and tance to Ground be-
ground point tween the Surface
with an included (rear electrodes) and
MATERIALS
SOLDERING WORK HEATED TOOLS

lElastic & scissible rubber sheet. lead. ground point with an

included lead.

Double structure
static-diffusion layer (green) : 0.5 mm
conductive layer (black) : 1.5 mm
SPECIFICATIONS
MODEL WA-400
Conductive Power Supply 9 V (006P) Battery
layer
Static-diffusion layer 103 –1012 Ω / sq (Surface Resistivity)
Ranges
103 –1012 Ω (RTG & RTT)
Battery Life Approx. 40 hours
Dimensions 61 (W) × 26 (H) × 96 (D) mm
HAND TOOLS

Weight 70 g (w/o battery)

AccessoriesAccessories 2 x Test Wires

85
 SOLDERING ACCESSORIES GLOVES / SOLDER ASSIST
SOLDERING
SYSTEM

Low dust-shedding with woolly nylon. LOW-DUST GLOVES

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

Ideal for clean rooms. MODEL Coating Size A×B

WG-1S S 65 × 185 mm
LOW-DUST GLOVES / ANTI-STATIC GLOVES
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

WG-1M Fingertip Coating

WG series
M 65 × 205 mm
WG-1L L 70 × 225 mm
WG-2S S 65 × 185 mm
WG-1/2 series WG-2M Palm Coating M 65 × 205 mm
RoHS WG-2L L 70 × 225 mm
LOW-DUST GLOVES
lS eamless and elastic for per fec t fit. Hold small ANTI-STATIC GLOVES
c o m p o n e n t s s a f e l y. lS u p e r i o r v e n t i l a t i o n w i t h MODEL Coating Size A×B
polyurethane resin coating on fingertips only, or palm. WG-3S S 65 × 185 mm
WG-3M Fingertip Coating M 65 × 205 mm
lMachine washable.
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

WG-3L L 70 × 225 mm
WG-4S S 65 × 185 mm
WG-3/4 Series RoHS ANTI
STATIC WG-4M Palm Coating M 65 × 205 mm
ANTI-STATIC GLOVES WG-4L L 70 × 225 mm

lRemove static charge quickly with woolly nylon &

conductive fiber material. lHigh elasticity. Perfect for
holding small components.
Surface resistance: 3.3 × 108 Ω

WG-1/2 series WG-3/4 series

Fingertip Coating
WG-3シリーズ Palm Coating
WG-4シリーズ

B
B
SOLDER POTS

A A

NOTE: The polyurethane resin coating is not Polyurethane

an anti-static material.
SURFACE MOUNT / SMT
PRODUCTS

Convenient set of 6 tools for assembling SUGGESTED USES

and repairing PCBs. Lever Chip Holder
SOLDER ASSIST
DESOLDERINGS

Removes ICs or condensers. Holds chips and micro

RoHS
SA-10
components for soldering
work.

Hook Knife
Offset chip holder 45˚chip holder Removes components such Removes PCB mask ink or
as resistors. rust, or cuts unnecessary
circuits.
Split 45˚ lever Fork shaft
ACCESSORIES

Brush Scraper
SOLDERING

Square scraper/chisel Knife

Removes solder scraps, PCB Removes PCB mask ink or
Curved needle Spring hook mask ink or rust. rust, or strips lead wires.

Square tapered reamer Tapered reamer

Fork Shaft Reamer
SOLDERING WORK

Stainless steel brush Brass brush Bends lead wires in Opens or enlarges holes.
required directions.
MATERIALS

NOTE : Not sold individually. Needle

Removes flat ICs.
HEATED TOOLS

MODEL Size Weight

SA-10 Approx. 180 mm Approx. 60 g
HAND TOOLS

86
 SYSTEM
SOLDERING
SOLDERING ACCESSORIES TWEEZERS
Ideal for assembly work such as Extra-fine tip with sharp and

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
soldering PCBs or replacing parts. RoHS SST strong edges. RoHS SST
PRECISION TWEEZERS [STANDARD] PRECISION TWEEZERS [ULTRAFINE]
TS-10 TS-14

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

TS-10 TS-14

MODEL Tip Shape Length Weight MODEL Tip Shape Length Weight
TS-10 Standard Approx. 120 mm Approx. 19 g TS-14 Extra fine Approx. 115 mm Approx. 17 g

Longer tip and overall length, RoHS SST Eagle-beak tweezers RoHS SST
best for holding tiny components. with 45° bent tip.

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

PRECISION TWEEZERS [LARGE] PRECISION TWEEZERS [EAGLE BEAK]
TS-11 TS-15

TS-11 TS-15

MODEL Tip Shape Length Weight MODEL Tip Shape Length Weight
TS-11 Large Approx. 140 mm Approx. 15 g TS-15 Curved Approx. 120 mm Approx. 15 g

Small-sized tweezer in standard model. Self-closing, reverse action. Ideal

RoHS SST for holding parts when soldering. RoHS SST
BEST with DELICATE WORK. [SMALL-SIZED] PRECISION TWEEZERS [REVERSE ACTION]
TS-12 TS-16/17

SOLDER POTS
TS-16
TS-12

PRODUCTS
SURFACE MOUNT / SMT
MODEL Tip Shape Length Weight
TS-12 Standard Approx. 115 mm Approx. 15 g TS-17

Round tip prevents

damage to components. RoHS SST

DESOLDERINGS
PRECISION TWEEZERS [ROUND]
TS-13 Press
Open SOLDERING
ACCESSORIES

TS-13

MODEL Tip Shape Length Weight

MODEL Tip Shape Length Weight TS-16 Standard Approx. 120 mm Approx. 20 g
MATERIALS
SOLDERING WORK HEATED TOOLS

TS-13 Round Approx. 120 mm Approx. 19 g TS-17 Round Approx. 165 mm Approx. 30 g

Protects components from excess heat from soldering iron.

HEAT CLIPS [HEAT SINK]
RoHS H-1S

H-1S/1L/2SL
H-1L is suitable for reaching into narrow spaces.
H-2SL is a set of H-1S and H-1L.
MODEL Material Length Weight
H-1S 70 mm 4.5 g
HAND TOOLS

H-1L Aluminum 68 mm 4.5 g H-1L

H-2SL A set of H-1S and H-1L

87
 SOLDERING ACCESSORIES TIP CLEANER/SOLDERING IRON STANDS
SOLDERING
SYSTEM

Improves oxidized soldering tips. For any type of soldering iron:

TIP REFRESHER RoHS MSDS nichrome or ceramic. RoHS
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

BS-2 SOLDERING IRON STANDS

ST-11/75/75 V/76/77
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

lRemoves oxides on tips, re-coats the tip with tin, and

restores solder wetting capability.

BEFORE AFTER

HOW TO USE ST-75 ST-75 V

TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

ST-11
1. Optimal tip temperature for cleaning is 300°C-360°C.
2. Rub the tip in the tip refresher.
For ceramic-heater soldering iron only
Cannot be used for HRC series
3. Apply solder to the tip, and clean the tip with the sponge of the
soldering iron stand.
4. Apply solder again. You are finished. If wetting capability is not enough,
repeat steps 2 & 3. Angle adjustable Angle adjustable
up to 60° up to 60°
MODEL BS-2
Composition Ammonium phosphate, Tin Powder
NET Content 9g
ST-76 ST-77

MODEL
No water, so less heat loss. Width Depth Height Weight
RoHS ANTI
STATIC
ST-11 75 mm 110 mm 130 mm 350 g
TIP CLEANER ST-75 102 mm 110 mm 115 mm 410 g
ST-40 ST-75 V
ST-76
110 mm
102 mm
125 mm
110 mm
125 mm
140 mm
480 g
490 g
lThe holder is made of slip- ST-77 68 mm 160 mm 148 mm 400 g
proof, heat-resistant silicon
rubber. Its special shape prevents Only for ceramic soldering iron.
solder-slag flying around. l1 ball HRC series compatible RoHS
of brass wool is included.
SOLDERING IRON STAND
SOLDER POTS

ST-27
SURFACE MOUNT / SMT
PRODUCTS

MODEL Width Height Weight

ST-40 59 mm 60 mm 80 g

Simple, portable, fold-away cleaner.

DESOLDERINGS

Can be kept in a tool box. RoHS

MODEL Width Depth Height Weight
TIP CLEANERS ST-27 72 mm 178 mm 106 mm 485 g

ST-30/70 Just for XST-80 series.

RoHS
ACCESSORIES
SOLDERING

SOLDERING TWEEZERS STAND

ST-28 Built especially for XST-80 series.
SOLDERING WORK
MATERIALS

ST-30 ST-70

MODEL Width Depth Height Weight

HEATED TOOLS

ST-30 57 mm 87 mm 45 mm 35 g
ST-70 60 mm 110 mm 60 mm 70 g

MODEL Width Depth Height Weight

ST-28 72 mm 178 mm 106 mm 515 g
REPLACEMENT PARTS / OPTIONS
HAND TOOLS

ST-11 Sponge ST-22/27/28/53 Sponge ST-30 Sponge ST-70/75/76/77/75 V Sponge ST-22/27/28/ 40 Cleaner (2pcs)
ST-11SP ST-53SP ST-30SP ST-70/75SP ST-40BW

88
 SYSTEM
SOLDERING
SOLDERING ACCESSORIES SOLDERING IRON STANDS/MAGNIFIERS
Superior stability 3X magnification with a diameter
RoHS of 90 mm acrylic bifocal lens.

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
SOLDER REEL HOLDERS
ST-51/52/53 MAGNIFIERS
l M a x imum l o a d o f 1 k g .
ST-91/92/93 Stable base makes safe
soldering work.
Heav y base ensures e x tra

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

stability. Guide spring prevents
solder tangle. Comes with
carrying handle.
Solder is not included.

ST-51
ST-91
ST-92

ST-53 For ceramic-heater soldering iron only

Cannot be used for HRC series

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

ST-53 soldering iron stand
attaches to either side of the
ST-93
reel holder.

ST-93 has small

& large flexible clips.
ST-52
MODEL Width of Clip度 Width Depth Height Weight
l B o th the upp er and ST-91 ー 95 mm 170 mm 190 mm 410 g
lower spindles c an b e ST-92 105 mm 120 mm 160 mm 130 mm 550 g

SOLDER POTS
mounted with up to 1 kg ST-93 200 mm 150 mm 245 mm 280 mm 1000 g
solder reels.
Rubber suction base easily fixes to any work table.

PRODUCTS
SURFACE MOUNT / SMT
MINI VISE Makes soldering work easier by holding
ST-80 small components.

MODEL Width Depth Height Weight

DESOLDERINGS
ST-51 110 mm 620 g
92 mm 120 mm
ST-52 194 mm 870 g
ST-53 163 mm 150 mm 126 mm 1100 g

MODEL Width of Clip度 Width Depth Height Weight

SOLDERING
ACCESSORIES

ST-80 35 mm 80 mm 90 mm 70 mm 110 g

Applicable Soldering Iron Dimensions for ST-53/76/77 C

B
A

A Under ø14mm
MATERIALS
SOLDERING WORK HEATED TOOLS

B Under ø28mm
C Under 105mm

PERFECT CHOICE OF TIP CLEANER AND IRON STAND ◎ Best ○ Good

Nichrome Type Ceramic Type Tempurature Controlled
PX-201
Item Model KS CXR-60 PX-335
CS-21 CXR-31 PX-401
HOT HP HRC CXR-80 TQ PX-338
CA CS-31 CXR-41 CXR-100 PX-342 PX-501（AS）
PX-601（AS）
ST-30 ○
Tip Cleaner
ST-70 ○ ○ ○ ○
ST-11 ◎ ○ ○ ○
ST-27 ◎ ◎ ◎ ◎ ◎ ◎ ◎
HAND TOOLS

Soldering
ST-75 ◎
Iron Stand
ST-76 ○ ○ ○
ST-77 ◎ ◎ ◎ ◎ ◎ ◎

89
 SOLDERING ACCESSORIES CORE DRIVERS/TOOL SETS
SOLDERING
SYSTEM

For adjusting high frequency coils. A must-have!

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

CORE ALIGNMENT TOOLS

RoHS MAINTENANCE TOOL SETS
CD-10 TL-10/20
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

5 alignment tools to adjust potentiometers, IFT coils, and high frequency

coils. Made of plastic. Can be used safely for high-voltage parts.
NOTE: Not sold individually.

MODEL SIZE Length Weight

CD-1 1.2 ✕ 0.65 1.4 2.6 2.7 1.5 1.4 ✕ 0.75
127mm 3.2g

CD-2 1.95 2.6 2.65 2.0 1.9 ✕ 0.9

141mm 3.1g

CD-3 131mm 3.5g

2.6 ✕1.0 2.65 3.1 3.35 3.15 3.2 ✕ 1.2

CD-4 137mm 4.2g

2.8 ✕ 0.3 3.4✕ 0.3
TL-20
CD-5 For trimmer potentiometer diam. φ7.8, inner diam. φ5.8 136mm 2.2g

MODEL Item
No. Contents No. Contents No. Contents
CD-10 Core Alignment Tools (5 tools per set)
1 Cutting nippers 8 Screwdriver (+) No.0 15 Solder assist (Reamer)
2 Pliers 9 Screwdriver (+) No.1 16 Solder assist (Fork &
Remover)
Best adjusting tool for high-frequency RoHS 3 Cutting pliers 10 Screwdriver (+) No.2 17 Desoldering wick
components. 4 Tweezers 11 Hexagonal wrench 5.5 BOX 18 Tip cleaner
5 Miniature screwdriver (—) 12 Soldering iron 19 Cutter knife
CERAMIC CORE DRIVERS 6 Screwdriver (—) 4.0 mm 13 Solder 20 File

CD series 7 Screwdriver (—) 5 mm 14 Desoldering pump 21 Tool bag

SOLDER POTS

Non-conductive, anti-magnetic, and long-life screwdriver with zirconia

cecramic tip. Best adjusting tool for high-frequency components such
as in Tuner, TV, Radio, Transceiver.
SURFACE MOUNT / SMT

CD-15
PRODUCTS

CD-20

CD-25
DESOLDERINGS

CD-100

MODEL Length Weight Tip size Tip type

ACCESSORIES
SOLDERING

CD-15 1.3 (W) x 0.4 (D) mm CD-15T

CD-20 1.8 (W) x 0.4 (D) mm CD-20T
115 mm 5g
CD-25 2.6 (W) x 0.4 (D) mm CD-25T TL-10
CD-100 No.0.＋ CD-100T
SOLDERING WORK

■ TIP SHAPES
MATERIALS

No. Contents No. Contents

1 Pliers 8 Screwdriver (–) 5 mm
2 Cutting nippers 9 Hexagonal wrench 5.5 BOX
3 Tweezers 10 Desoldering wick
CD-15T CD-20T CD-25T CD-100T 4 Miniature screwdriver (-) 11 Tip cleaner
HEATED TOOLS

5 Screwdriver (+) No.1 12 Solder

6 Screwdriver (+) No.2 13 File
7 Soldering iron 14 Tool bag
REPLACEMENT PARTS / OPTIONS
Tip for CD-15 (1.3×0.4 mm) Tip for CD-20 (1.8×0.4 mm)
CD-15T CD-20T
HAND TOOLS

Tip for CD-25 (2.6×0.4 mm) Tip for CD-100 (No.0 +)

CD-25T CD-100T

90
SOLDERING LEAD-FREE TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER SOLDER POTS SURFACE MOUNT / SMT
SURFACE-MOUNT DESOLDERINGS SOLDERING SOLDERING WORK HEATED TOOLS HAND TOOLS

9191
SYSTEM TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER PRODUCTS ACCESSORIES MATERIALS
SOLDERING STATIONS
SOLDERING WORK MATERIALS
BS-H20B
BS-H20B
BS-10/15/850

SE series
SPECIAL SPOOL SOLDERS
SOLDERING PASTES
ANTI-SEIZE
ANTI-SEIZE
 SOLDERING WORK MATERIALS
SOLDERING
SYSTEM

Provides improved soldering

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

performance. RoHS MSDS Improves oxidized soldering tips.

RoHS MSDS
SOLDERING PASTES
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

TIP REFRESHER
BS-10/15/850 BS-2
Improves wettability. NOTE: BS-10/15 is a weakly lRemoves oxides on tips, re-coats the tip with tin, and
acidic pas te. Cannot b e
used on PCBs.
restores solder wetting capability.

BEFORE AFTER
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

HOW TO USE
BS-15 1. Optimal tip temperature for cleaning is 300°C-360°C.
2. Rub the tip in the tip refresher.
3. Apply solder to the tip, and clean the tip with the sponge of the
soldering iron stand.
4. Apply solder again. You are finished. If wetting capability is not
enough, repeat steps 2 & 3.

MODEL BS-2
Composition Ammonium phosphate, Tin Powder
NET Content 9g

Good for PCB lead

wires and electric
components. For soldering tips & nozzles
ANTI-SEIZE RoHS MSDS
BS-H20B Cap with brush
BS-850
SOLDER POTS

E f f e c ti vely prote c t s me t al f rom high

temperatures and seizing. Paste type. Brush
included in the cap makes easy application
SOLDERING PASTES to rough surfaces or hard-to-reach parts and
MODEL BS-10 BS-15 places. Perfect for nozzle-threaded part of TP
& SVS series. Neutral PH7.
SURFACE MOUNT / SMT

NET Content 10 g 50 g
Vaseline : 80-90 Wt%
Zinc chloride : 4-6 Wt%
PRODUCTS

Composition Water : 2-4 Wt%

Paraffin : 6-9 Wt%
Ammonium chloride : 1-3 Wt%
DESOLDERINGS

ROSIN based PASTE

MODEL BS-850
NET Content 500 g MODEL BS-H20B
Rosin : 40-50 Wt% NET Content 20 mL
2-Methyl-2 4Pentanediol : 40-50 Wt% Boron Nitride 25%
ACCESSORIES

Composition Organic acid : Less than 1 Wt% Composition Water 70-80%

SOLDERING

Thixotropic agent : 4-6 Wt% Mg-Al Silicate Less than 5%

Activator : 1-3 Wt% Heat resistance 900˚C
SOLDERING WORK

Industry-standard composition
LEAD-FREE SOLDERS RoHS MSDS LEAD
FREE
MATERIALS

SF-A series (Rosin core)

LEAD-FREE SOLDERS SF-A series ( Industry-standard composition)
HEATED TOOLS

MODEL Composition (Sn-Ag-Cu) M.T. Dia. Length (reference) Weight Rosin

SF-A0403 ø0.3 mm 107 m
SF-A0404 ø0.4 mm 60 m
SF-A0406 96.5-3.0-0.5 217-220˚C ø0.6 mm 27 m 45 g Rosin core
SF-A0408 ø0.8 mm 15 m
HAND TOOLS

SF-A0410 ø1.0 mm 10 m

92
 SYSTEM
SOLDERING
Low-Ag type
RoHS MSDS LEAD

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
LEAD-FREE SOLDERS FREE
SF-B series (Rosin core/ Non-rosin core)
LEAD-FREE SOLDERS SF-B series (Low-Ag type)

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

Composition (Sn- Length
MODEL M.T. Dia. Weight Rosin
Ag-Cu) (reference)
SF-B1003 ø0.3 mm 225 m
SF-B1004 ø0.4 mm 127 m
SF-B1006 ø0.6 mm 56 m
Rosin core
SF-B1008 ø0.8 mm 32 m
SF-B1010 99-0.3-0.7 216-227˚C ø1.0 mm 20 m 100 g
SF-B1012 ø1.2 mm 14 m
*SF-B1012N ø1.2 mm 14 m None
SF-B1016 ø1.6 mm 8m Rosin core
*SF-B1016N ø1.6 mm 8m None
SF-B4006 ø0.6 mm 225 m
SF-B4008 ø0.8 mm 127 m
99-0.3-0.7 216-227˚C 400 g Rosin core

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

SF-B4010 ø1.0 mm 81 m
SF-B4012 ø1.2 mm 56 m
SF-B8008 ø0.8 mm 253 m
SF-B8010 99-0.3-0.7 216-227˚C ø1.0 mm 162 m 800 g Rosin core
SF-B8012 ø1.2 mm 113 m
NOTE: SF-B1012N & SF-B1016N are not rosin core. They require metal-working flux.

Eco-friendly LEAD lHigh-reliabilit y residue af ter soldering. Wash-free

HALOGEN-FREE LEAD-FREE SOLDERS RoHS MSDS FREE available. Does not intentionally contain halogens. Fewer
SF-N series (Rosin core) than 1,000 ppm each of chlorine, bromine, fluorine, and
LEAD-FREE SOLDERS HALOGEN-FREE SF-N series iodine. (JEITA Standards)

MODEL Composition (Sn-Ag-Cu) M.T. Dia. Length (reference) Weight Rosin

SF-N0406 ø0.6 mm 27m
SF-N0408 96.5-3.0-0.5 217-220˚C ø0.8 mm 15m 45 g Rosin core
SF-N0410 ø1.0 mm 10m

SOLDER POTS
Special purpose
SPECIAL SPOOL-SOLDERS MSDS
SE special series

PRODUCTS
SURFACE MOUNT / SMT
MODEL Item Composition (Sn-Pb) M.T. Dia. Weight Length (reference) Rosin
SE-06003RMA RMA WASH FREE ø0.3 mm 180 m
60-40% 183−190˚C 100 g Rosin core
SE-06006RMA SOLDER ø0.6 mm 48 m
SE-0AG08 Ag solder 60-37.5-2.5(Ag)% 178-211˚C ø0.8 mm 27 m
Rosin core
SE-06308 Eutecitc solder 63-37% 183-184˚C ø0.8 mm 27 m
100 g
SE-0ST16 Stainless-use solder 63-37% 183-184˚C ø1.6 mm 7m
Non-rosin core
SE-0BA16 Metal-work solder 45-55% 183-227˚C ø1.6 mm 6m

DESOLDERINGS
SE-05010 ø1.0 mm 17 m
SE-05012 ø1.2 mm 12 m
100 g
SE-05016 ø1.6 mm 7m
SE-05020 ø2.0 mm 4m
SE-55010 ø1.0 mm 85 m
SE-55012 Pb containing ø1.2 mm 60 m
50-50% 183−215˚C 500 g Rosin core
SOLDERING
ACCESSORIES

SE-55016 solder ø1.6 mm 35 m

SE-55020 ø2.0 mm 20 m
SE-K5010 ø1.0 mm 170 m
SE-K5012 ø1.2 mm 120 m
1 kg
SE-K5016 ø1.6 mm 70 m
SE-K5020 ø2.0 mm 40 m
MATERIALS
SOLDERING WORK HEATED TOOLS

SE-06006 ø0.6 mm 48 m
SE-06008 ø0.8 mm 27 m
SE-06010 ø1.0 mm 100 g 17 m
SE-06012 ø1.2 mm 12 m
SE-06016 ø1.6 mm 7m
SE-56006 ø0.6 mm 240 m
SE-56008 ø0.8 mm 135 m
Pb containing
SE-56010 60-40% 183−190˚C ø1.0 mm 500 g 85 m Rosin core
solder
SE-56012 ø1.2 mm 60 m
SE-56016 ø1.6 mm 35 m
SE-K6006 ø0.6 mm 480 m
SE-K6008 ø0.8 mm 270 m
SE-K6010 ø1.0 mm 1 kg 170 m
HAND TOOLS

SE-K6012 ø1.2 mm 120 m

SE-K6016 ø1.6 mm 70 m
NOTE: SE-0ST16 & SE-0BA16 are not rosin core. They require flux.

93
 HAND TOOLS HEATED TOOLS SOLDERING WORK SOLDERING DESOLDERINGS SURFACE MOUNT / SMT SOLDER POTS SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE SOLDERING
ACCESSORIES PRODUCTS TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS SOLDERING STATIONS TEMPERATURE-CONTROLLED SYSTEM

94
MATERIALS SOLDERING STATIONS

TQ-77

GP-510

TQ-95
KS-30R
KX-30R

CXR-100
MI-6-6 V

CS-31

HP-300

PX-338
RX-85GAS

RX-80GAS
 LEAD-FREELEAD-FREE TEMPERATURE-CONTROLLED
SOLDERING TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLEDHIGH
TEMPERATURE-CONTROLLED EFFICIENCY
HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING
GENERAL/SPECIALPURPOSE SOLDERTESTER
POTS SURFACEDESOLDERINGS
SOLDER POTS / SMT
SURFACE-MOUNT MOUNT / SMT DESOLDERINGS
SOLDERING SOLDERING
SOLDERING
SOLDERING HEATEDHEATED
WORK WORK TOOLS TOOLS HANDHAND
TOOLSTOOLS

9595
TEMPERATURE-CONTROLLED
SYSTEM TEMPERATURE-CONTROLLED
SOLDERING STATIONS
SOLDERING SOLDERING
STATIONS IRONSIRONS SOLDERING
SOLDERING IRONS
SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER
SOLDERINGIRONS PRODUCTS PRODUCTS ACCESSORIESACCESSORIES
MATERIALS
MATERIALS
SOLDERINGSOLDERING
STATIONS STATIONS
HB-80

HOT-30R/60R
HE-110
HB-45
HB-100S/200S/40S
HEATED TOOLS
MINI HOT BOND

HOT KNIVES
HOT STICKS

HOT SLICER
HOT BOND
 HEATED TOOLS HOT BOND/POWER CONTROLLER
SOLDERING
SYSTEM

Glue things easily.

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

HOT BOND RoHS

HB-80
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

l Many uses! Easy operation!

l Hobby/Industrial use. Load the gun with "hot stick"
glue. The gun melts the glue.

FEATURES
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

Repairing, adhering, or f illing porous

Built-in
FOR materials such as wood, paper, cloth,
or leather. Tentative f ixing of plastic, Safety Fuse
metals,earthenware, or glass.

Only 10 seconds to bond and 1-4 minutes to

OPERATION harden completely. Suitable for both soft &
rough surfaces.

HOT STICK Glue sticks do not contain any solvent and

are 100% solid. Easy to use and to keep.

APPLICATIONS
Good for interior design, display, wrapping
and packing, bookbinding,
SPECIFICATIONS
repair of cracks/shoes/
082

bags, bonding of lead wire,

019

MODEL HB-80
prefixing components, etc. Voltage 110–240 V AC 50 / 60 Hz
Power Consumption 14 W
Nozzle Temp. 160˚C
NOTE Main composition Ethylen - Vinyl Acetate Heater PTC Heater
SOLDER POTS

Data (right) is measured values. Soften point 84˚C (Ring & ball) Power Cord Length 1.4m
This is not a warranty. Reheating Open time 30 s Dimensions 185 (W) x 155 (H) mm
will melt hot stick again. Please Setting time 18 s Weight 220 ｇ
test carefully for suitability to your 180˚C 10000 cps Accessories Hot Sticks 4pcs (Approx. ø11 x 100 mm), Wire Stand
Viscosity
situation. TAIYO is not responsible for 170˚C 15000 cps
*The length does not include the cord bushing. The weight does not include the cord.
SURFACE MOUNT / SMT

misuse. Peeling strength Canvas 2.59 kg/ cm

Glue strength
Share strength PVC-PVC 27.81 kg/ cm2 Nozzles
PVC-ABS 24.33kg/ cm2
PRODUCTS

HB-80N-B HB-80N-SB HB-80N-2D

Standard （ （）内税別
（ ）内税別
）内税別
1313
13 2323
23
φ1.8
φ1.8
φ1.8
φ1.8
φ1.8
φ1.8

5
5
5
DESOLDERINGS

HB-80N-B ¥599
HB-80N-B
HB-80N-B （ （（
¥599
¥599 ¥570
¥570
） ））
¥570 HB-80N-SB ¥599
¥599
HB-80N-SB
HB-80N-SB （ （（
¥599 ¥570
¥570
） ））HB-80N-2D
¥570 ¥599
¥599
HB-80N-2D
HB-80N-2D（ （（
¥599 ¥570
¥570
） ））
¥570

For hobby use

MINI HOT BOND RoHS
HB-45
ACCESSORIES
SOLDERING

l Hobby/Industrial use. Compact.

SOLDERING WORK
MATERIALS

SPECIFICATIONS

MODEL HB-45 HB-45

HEATED TOOLS

Voltage 110–240 V AC 50 / 60 Hz
Power Consumption 7W
Built-in
Nozzle Temp. 160˚C Safety Fuse
Heater PTC Heater
Dimensions 130(W)x115(H)mm
Weight 100 ｇ
HAND TOOLS

Accessories Hot Sticks 3pcs (Approx. ø7 x 100 mm), Wire Stand

*The length does not include the cord bushing. The weight does not include the cord.

96
 SYSTEM
SOLDERING
Glue stick for hot bond

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
HOT STICKS
RoHS MSDS
HB-100S/200S
lHot stick (solid glue) for HB-80.

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

MODEL Color Length/mm Weight/g Quantity
HB-100S Approx. 100 10
HB-100S-B1 Approx. 350 36
Approx. ø11x100
HB-100S-1K 1k Approx. 100
HB-100S-10K TP 10 k Approx. 1000 HB-100S-1K
HB-200S Approx. 230 12
HB-200S-1K Approx. ø11x200 1k Approx. 50
HB-200S-10K 10 k Approx. 520

Glue stick for mini hot bond

HOT STICKS
RoHS MSDS

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

HB-40S
lHot stick (solid glue) for HB-45
MODEL Color Length/mm Weight/g Quantity
HB-40S Approx. 50 12 HB-200S
HB-40S-B1 Approx. 300 Approx. 72
TP
HB-40S-1K ø7×100 1k Approx. 250
HB-40S-10K 10 k Approx. 2,500

HB-40S-B1 HB-100S-B1

SOLDER POTS
PRODUCTS
SURFACE MOUNT / SMT
SOLDERING DESOLDERINGS
MATERIALS ACCESSORIES
SOLDERING WORK HEATED TOOLS HAND TOOLS

97
 HEATED TOOLS HOT KNIVES/HOT SLICER
SOLDERING
SYSTEM

For plastic models For nylon net or cloth

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

HOT KNIVES HOT SLICER

RoHS
HOT-30R/60R HE-110
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

lComes with soldering tip, rosin lBest for heat slicing of nylon garden
core solder and soldering iron stand, nets, fish nets, promotional flags, etc.
so it can be used as a soldering iron. lThe sliced end does not fray.
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

スタンド使用時

*Not for linen, cotton, or metal wire.

*Can't be used for soldering.

Cutting ability within 5 seconds.

Cutting Ability ●Cross section view
of sample material
HOT-30R HOT-60R ＜Round bar＞

Plastic Types Thickness Bar (Dia.) Thickness Bar (Dia.) Cutting

mat
SOLDER POTS

Diameter
Vinyl Chloride 0.5 mm 2 mm 1 mm 3 mm (mm)

Acrylic 0.5 mm 2 mm 1 mm 3 mm ＜Board＞

ABS 1 mm 3 mm 2 mm 4.5 mm 10mm

Polypropylene 1 mm 3 mm 1 mm 3 mm Thickness
(mm)
Polycarbonate 1 mm 3 mm 1 mm 3 mm
SURFACE MOUNT / SMT

REPLACEMENT TIPS
80
HOT-30R
PRODUCTS

75
12
R0.5 9
REPLACEMENT TIPS
φ6
1.6
φ4

R-48B HOT-30CU

8087 HE-110TL
75 87
R0.5 9 12 17 17
φ4

φ6
φ6
1.6
φ4

3 110
DESOLDERINGS

87 80
87
HOT-60R 75
26

R0.5 17 12 17
φ4

φ6
φ6

9
1.6
φ4
6

R-6BC HOT-60CU 37
50
80
87 HE-110TL ¥1,890 (¥1,800)
75 87
R0.5 9 1217 17
φ4

φ6
φ6
1.6
φ4

6
ACCESSORIES
SOLDERING

87 87
17 17
φ4

φ6
6

REPLACEMENT PARTS / OPTIONS REPLACEMENT PARTS / OPTIONS

HOT-30R Heater HOT-60R Heater HE-110 Heater
SOLDERING WORK

KS-30H KS-60H CXR-100H

MATERIALS

SPECIFICATIONS SPECIFICATIONS
MODEL HOT-30R HOT-60R MODEL HE-110
Voltage 110 V, 120 V, 220 V, 240 V AC 50/ 60 Hz Voltage 110-130 V, 220-240 V AC 50/ 60 Hz
30 W equiv. 60 W equiv. Power Consumption 38 W
HEATED TOOLS

Power Consumption Power consumption may vary according to location and item specs. Heater Ceramic Heater
Please see Products power consumption and safety standard p.6 Length 284 mm
Heater Nichrome Heater Weight 104 g
Length 230 mm 250 mm
Weight 50 g 65 g *The length does not include the cord bushing. The weight does not include the cord.
*The length does not include the cord bushing. The weight does not include the cord.
HAND TOOLS

98
SOLDERING LEAD-FREE TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER SOLDER POTS SURFACE MOUNT / SMT
SURFACE-MOUNT DESOLDERINGS SOLDERING SOLDERING WORK HEATED TOOLS HAND TOOLS

9999
SYSTEM TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER PRODUCTS ACCESSORIES MATERIALS
SOLDERING STATIONS
YP-201
YS-1

YS-100 / 101
YS-2 / 3
YP-1/ 3/ 4

YN-104
YN-1/ 3/ 4

YP-10
YN-215AS / YN-220AS
YN-300

YN-10AS / 13AS
YN-25AS/26AS/27AS

MANUAL DEPANELING TOOLS

1.5 mm PLATFORM NIPPERS
HAND TOOLS
AIR-POWERED DEPANELING

PRECISION WIRE STRIPPERS

PRECISION NIPPERS

PRECISION PLIERS

CABLE STRIPPERS
CRIMPING PLIERS
WIRE STRIPPERS
HOBBY NIPPERS
SUPER CUTTERS

HOBBY PLIERS
TOOL
 HAND TOOLS SUPER CUTTERS/HOBBY HAND TOOLS
SOLDERING
SYSTEM

Light & Compact. Depaneling tool for cutting PCB tabs.

SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

RoHS
Suitable for hobby work. AIR-POWERED DEPANELING TOOL
HOBBY HAND TOOLS YN-300
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

mini YN/YP series NEW

MINI NIPPERS MINI NIPPERS (FOR PLASTIC) RoHS
YN-1 YN-3
Blade not included.

MINI PLIERS MINI NIPPERS

TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

YP-1 YN-4
lUses compressed airlEasy continuous Replacement blade/
operation with compressed air.lSuitable for Replacement blade set
many kinds of PCBs in small lot production.
Replacement Replacement
blade blade set
MODEL YN-300
Compressed Air Pressure 6–7 Bar–Tube ø6
MINI PLIERS MINI PLIERS Consumption 3.5 Nl/ min
YP-3 YP-4 Blade Material Tempered steel
Approximate Dimensions Approx.
(not including the blade) 210 x 35 mm YN-300- B YN-300- SB
Weight 400 g series series

PCB Specifications
A PCB thickness 1.6 mm max.
MINI NIPPERS Slot length (L) min. 13 mm – max. 70 mm

S
V

1.5 mm / 1.8 mm / 2.0 mm

MODEL Max. Cut Dia. Length L Slot width (V)
(Depends on blade)
YN-1 118 mm Slot width tolerance 0–0.02 mm
YN-3 ø1.8 mm (copper wire) 118 mm SLOT
Distance between slots (A) 1 mm–3 mm（tole. 0+0.1 mm）
YN-4 125 mm Protrusion (S) max. 0.05 mm
Lower area of PCB free of
MINI PLIERS C C components (C)
1.9 mm min.

MODEL Max. Cut Dia. Length

YP-1 ø1.2 mm (soft iron) 124 mm Replacement blade set YN-300-SB15 YN-300-SB18 YN-300-SB20
MODEL Replacement blade
YP-3 ø1.6 mm (soft iron) 145 mm YN-300-B15 YN-300-B18 YN-300-B20
YP-4 Blade thickness 1.5 mm 1.8 mm 2.0 mm
SOLDER POTS

ø1.6 mm (soft iron) 160 mm

Blade Material Tempered steel
A 1.5 mm 1.8 mm 2.0 mm
Fabulous cutting ability. PCB B 1-3 mm
Rockwell hardness HRC62. RoHS ANTI
STATIC
application size C min. 13 mm-max. 70 mm
D max. 1.6 mm
SURFACE MOUNT / SMT

SUPER CUTTERS Flush Replacement blade Replacement blade set

YN-25AS
Cutting Edge
Replacement blade 1.5 mm (LDPP15) Replacement blade set 1.5 mm (LPDPP15)
PRODUCTS

YN-300-B15 YN-300-SB-15
Replacement blade 1.8 mm (LDPP18) Replacement blade set 1.8 mm (LPDPP18)
YN-300-B18 YN-300-SB-18
Replacement blade 2.0 mm (LDPP20) Replacement blade set 2.0 mm (LPDPP20)
DESOLDERINGS

YN-300-B20 YN-300-SB-20

For depaneling PCBs

lBall-bearing grade steel lBlack oxide coated to resist rust MANUAL DEPANELING TOOL
RoHS ANTI
STATIC
lAnti-static model
YN-215AS/ 220AS
ACCESSORIES

Fabulous cutting ability. lFor depaneling PCBs with slits, or perforations.

SOLDERING

RoHS ANTI lOnly light force required. Less flex, and less
Rockwell hardness HRC58. STATIC
stress. lApplicable for CEM-3 PCBs
SUPER CUTTERS Flush
Cutting Edge
1.5

1.5

YN-26AS/27AS
7

6
2

20 20 20 20
SOLDERING WORK

147

147

147

147
MATERIALS

YN-220AS
YN-215AS YN-220AS

MODEL Length Weight Blade Thickness

YN-26AS YN-27AS
HEATED TOOLS

YN-215AS 1.5 mm
147 mm 95 g
lHigh-quality steel YN-220AS 2.0 mm
lAnti-static model
YN-26AS
Specifications
YN-220AS YN-215AS YN-220AS YN-215AS
YN-215AS YN-220AS
MODEL Max. Cut Dia. Length A 1.6 mm or more 2.1 mm or more
YN-25AS ø1.3 mm (Copper wire) 122 mm
HAND TOOLS

B 2.5 mm or less A
YN-26AS ø1.3 mm (Copper wire) 122 mm C 25 mm or more
C B
YN-27AS ø1.0 mm (Copper wire) 122 mm D 2.0 mm or less 2.0 mm or less D

100
 SYSTEM
SOLDERING
HAND TOOLS PRECISION NIPPERS
Micro Nippers For High-Density PCBs.

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
RoHS RoHS
FLAT CUTTING SURFACE PRECISION NIPPERS
YN-10/12/13/17/20 YN-15
Unit :mm Flush
A Cutting Edge
Unit :mm Flush
Cutting Edge

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

8
B

9.5
C
E
18
I

21°
L

4
lFlat cutting edges that do not put any load on 48°
the body of the component. For cutting precision 130
components, lead wires, etc. lThe YN-10 and 12 21
have a safety clip for holding wire scraps securely lThin-nose tool with inclined 48°
after cutting. NOTE: Use only for cutting copper wire. blades. Ideal for hard-to-reach
areas. lCleanly cuts flat IC leads

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

MODEL Max. Cut Dia. A B C E I L by aligning the cutting edge with 48

YN-10 ø1.3 8 13.5 20 9 6 140 the circuit board.

YN-12 ø1.0 8 10 18 9 5 133 NOTE: Use only for cutting copper wire.
YN-13 ø0.8 8 9.5 18 9 4 133
YN-17 ø1.3 (Thin blade) 8 13.5 20 9 5 138 MODEL Max. Cut Dia. Length
YN-20 ø1.6 8 13.5 20 9 6 139 YN-15 ø0.6 mm 130 mm

Anti-static type. Micro Nippers

PRECISION NIPPERS RoHS ANTI
STATIC STANDARD CUTTING SURFACE RoHS
YN-10AS/13AS YN-11/18
A Standard
Unit :mm Cutting Edge
Flush
Cutting Edge
B

C
E
I

SOLDER POTS
21°
L

Unit :mm

PRODUCTS
SURFACE MOUNT / SMT
lFlat cutting edges that do not put any load on lMaximum cutting diameter of 1.6 and 2.0 mm.
the body of the component. For cutting precision lYN-18 is stronger than YN-11.lThe YN-11 has a
components, lead wires, etc. lThe YN-10AS has 21 safety clip for holding wire scraps securely after
21
a safety clip for holding wire scraps securely after cutting.
cutting. NOTE: Use only for cutting copper wire.
NOTE: Use only for cutting copper wire.

DESOLDERINGS
MODEL Max. Cut Dia. A B C E I L MODEL Max. Cut Dia. A B C E I L
YN-10AS ø1.3 8 13.5 20 9 6 140 YN-11 ø1.6 8 13.5 20 9 6 138
YN-13AS ø0.8 8 9.5 18 9 4 133 YN-18 ø2.0 8 13.5 19 9 6 138

For High-Density PCBs. Heavy Duty Nippers RoHS

PRECISION NIPPERS RoHS STANDARD CUT
SOLDERING
ACCESSORIES

YN-21 8
YN-22
8 Standard
Flush Cutting Edge
Cutting Edge
13.5

13

MATERIALS
SOLDERING WORK HEATED TOOLS

20 21
21°
48°

141
137

Unit :mm Unit :mm

lStrong tool with a maximum cutting

lInclined 48° blades. For specific work such as the diameter of 2.0 mm. lThe 21°blade
leads of surface-mounted components. 48 angle allows easy cutting with slight 21
NOTE: Use only for cutting copper wire. force.
NOTE: Use only for cutting copper wire.
HAND TOOLS

MODEL Max. Cut Dia. Length MODEL Max. Cut Dia. Length
YN-21 ø1.3 mm 137 mm YN-22 ø2.0 mm 141 mm

101
 HAND TOOLS PRECISION NIPPERS
SOLDERING
SYSTEM

For integrated circuit pins. Highly accurate with serrated long nose.
SOLDERING STATIONS
SOLDERING STATIONS TEMPERATURE-CONTROLLED

PRECISION NIPPERS RoHS PRECISION PLIERS RoHS

Flush
YN-14 Cutting Edge
YP-10
SOLDERING TESTER GENERAL/SPECIAL PURPOSE HIGH EFFICIENCY TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED LEAD-FREE

48°
10
14 Unit :mm
40
130

14

13
4

Tip Shape
Unit :mm

6
•YP-10 1.2
TIP THERMOMETER SOLDERING IRONS SOLDERING IRONS SOLDERING IRONS

160 •YP-13
lAngled at 48° for the cutting 1.2

o f inte gr ate d circuit pins .

lHighly 31.5
accurate,
like precision tweezers.
lHeld in the reverse manner
31.5
lIdeal for hard-to-reach areas.
to standard nippers, the YN-14
13
cuts the flat IC leads that face
13
away from the user. MODEL Inner Surface Length

13
YP-10
10 w/ notches 160 mm
NOTE: Use only for cutting copper wire. 10

MODEL Max. Cut Dia. Length Crimps and cuts.

RoHS

6
YN-14 ø0.6 mm 130 mm CRIMPING PLIERS148
For integrated circuit pins. YP-201 148
36
148

PRECISION NIPPERS RoHS Unit :mm 36

YN-16 Flush 48
°
Cutting Edge 10
13
13
48° 14
130

14
16

4
135

152
lCrimps and cuts the152
component wire in one operation. lAdjustable
6 Unit :mm
from 6 to 18 mm.
Cross Section In Use Finished
SOLDER POTS

6 –18
lAngled at 48° for the cutting
6 –18 3.1 1.0-1.5
of integrated circuit pins. 34
2.5

PCB thickness 1.6mm

lHeld in the reverse manner 34
to standard nippers, the YN-16 NOTE: Use only for cutting copper wire. Cutting technique may result in
16
slightly varying lengths.
SURFACE MOUNT / SMT

cuts the flat IC leads that face

16
away from the user.
MODEL11 Max. Cut Dia. Length
NOTE: Use only for cutting copper wire.
PRODUCTS

11
YP-201 152 mm ø1.0 mm
MODEL Max. Cut Dia. Length
YN-16 ø1.3 mm 135 mm 152
152
Cuts 1.5 mm from the surface. (Horizontal Type)
DESOLDERINGS

1.5 mm PLATFORM NIPPERS RoHS

YN-104 Flush
Cutting Edge
21°
ACCESSORIES

1.5mm
13.5
SOLDERING

(Cuts leads 1.5mm above PCB)

8
20

Unit :mm
138

6
SOLDERING WORK
MATERIALS

lCuts wires 1.5 mm from the PCB surface.

HEATED TOOLS

NOTE: Use only for cutting copper wire.

Before After

CUTTING
Edge
1.5mm
HAND TOOLS

MODEL Max. Cut Dia. Length

YN-104 ø1.3 mm 138 mm

102
 SYSTEM
SOLDERING
HAND TOOLS WIRE STRIPPERS
2 in 1! Wire stripper and cutter. RoHS Adjustable cutting depth to match the

LEAD-FREE
SOLDERING STATIONS
TEMPERATURE-CONTROLLED SOLDERING STATIONS SOLDERING IRONS
WIRE STRIPPER thickness of the cable jacket.
YS-1 CABLE STRIPPER
RoHS
lAd jus t able s topp er f or YS-100/101
consistent lengths from 2 to

TEMPERATURE-CONTROLLED TEMPERATURE-CONTROLLED HIGH EFFICIENCY GENERAL/SPECIAL PURPOSE SOLDERING TESTER

20 mm. lBlade cutting depth
can be simply adjusted by the
dial to match the thickness
of the insulation material.
lExtremely durable Nylon
body strengthened by a metal
plate and fiber glass.

Cannot be used for Teflon,

Neoprene, or asbestos wire.
Damage to the core wire
may result, or it may be torn,
depending on the insulation

SOLDERING IRONS SOLDERING IRONS TIP THERMOMETER

material.

Stripper

Stopper
lCuts cable jacket

20
Cutter Adjustment Dial
Stripping simply and accurately.
lAdjustable cutting (mm)
depth to match the
thickness of the

27
cable jacket. lSpare
blades stored in the 140
handle. lSafe design
Handles Cutting with covered blade.
lThe blade moves HOW TO ADJUST THE BLADE
Turn the dial to adjust the blade
automatically in the c ut ting depth to matc h c able
MODEL Max. strip section Length cutting direction. jacket thickness. Excess blade edge
YS-1 0.2−5.5 mm2 170 mm damages the core wire.

SOLDER POTS
Three functions: Cutters, Wire stripper, Pliers. NOTE: Cannot be used with oval-shaped cables.

PRECISION WIRE STRIPPER

RoHS HOW TO USE
YS-2/3

PRODUCTS
SURFACE MOUNT / SMT
1. 4.
Unit :mm

28.5 6

30 0.2
Cutter part
28
26
0.3
0.4
Lock
Push up the hook metal.
40

24 0.5

DESOLDERINGS
22 0.6
Strip part
49

20 0.8

2.
AWG mm

Position A
Cable Face

Plier part Rotate the cable stripper in the direction

167

of the arrow. When the cable jacket is cut,

the stripper turns lightly.
SOLDERING
ACCESSORIES

Insert the cable. Let the cable push the

blade to position “A”. 5.
lMulti-use tool. It can be used
as: Cutters, multi-diameter wire 3.
MATERIALS
SOLDERING WORK HEATED TOOLS

stripper, and pliers. lLock for

handy storing. lSpring reduces
muscle fatigue. Pull outward in the direction of the arrow to
complete the stripping. (The blade moves
YS-2 automatically in the cutting direction.)
Clamp the cable by the hook.

NOTE: Use only for cutting copper wire.

MODEL Max. Strip Dia. Length
YS-100 ø4–16 mm
140 mm
YS-101 ø8–28 mm
MODEL Max. Strip Dia. Length
YS-2 ø0.25, 0.3, 0.4, 0.5, 0.6, 0.8 mm
167 mm
REPLACEMENT PARTS / OPTIONS
HAND TOOLS

YS-3 ø0.8, 1.0, 1.3, 1.6, 2.0, 2.6 mm

YS-100 /101 Blade
YS-100HA

103
 SOLDERING IRONS, EQUIPMENT & ACCESSORIES

TAIYO ELECTRIC IND.CO.,LTD.

2-16- 8 Yamate Fukuyama Hiroshima 720-0092 Japan
International Marketing
TEL: (81)84-951-1512 FAX: (81)84-951-9531
Website : www.goot.co.jp E-mail: info@goot.co.jp

"goot " is a registered trademark of Taiyo Electric Ind. Co., Ltd. Hiroshima JAPAN AUGUST 2016 N61135034-005