ABDUS SAMI KHAWAJA
Address: H.NO 444, ROAD B, PHASE V, BAHRIA TOWN
RAWALPINDI, PAKISTAN
Phone: 0092515732173, Mobi le: 00923218702289,
E-Mail: khawaja119@gmail.com
Skype: khawaja_sam86
SPECIALIZATION
I have 15 years of experience in installation, testing and commissioning, of automation systems of various
OEMs (SIEMENS, Rockwell, Schneider Electric and EMERSON) which includes HMI Development and
PLC/DCS software. Furthermore, I have hands on experience of engineering, automation and customer
handling in the field of upstream Oil and Gas, Batch processing plants, Substation Automation, AIS/GIS
Grid Stations as well as Combined Cycle Power Plants.
EDUCATION
B.Sc. Electrical Engineering University of Engineering Islamabad, Pakistan
(Majors in Technology, Texila (C.A.S.E)
Telecommunications)
[2006— June 2010]
NIZAM ENERGY (JAN 2019 –PRESENT)
I’m currently employed by Nizam Energy, as Commissioning Manager
Responsibility
Designed, installed, and commissioned solar PV systems for residential and commercial clients,
ensuring compliance with local building codes and safety standards
Designed, installed and Conducted site assessments to determine system requirements,
including energy needs, roof suitability, and shading analysis
Installed solar panels, inverters, mounting systems, and other equipment, following
manufacturer guidelines and industry best practices
Tested and commissioned systems to ensure optimal performance, safety, and
efficiency
Troubleshot and resolved technical issues during installation and commissioning,
collaborating with clients and stakeholders as needed
SIEMENS ENGG CO LTD (EM/DG) (MARCH 2016 – 2019)
I’m currently employed by SIEMENS Engineering Co LTD, as Executive Engineer in Energy
Management/Digital Grids department
Projects
Design of Transmission Package project(TP-1000), for K-Electric (Pakistan): It covers automation of
28 grid stations (220kV/132KV). I’m involved in base designs of 220kV/132kV grid stations, detail
engineering and wiring schematics using ELCAD and AutoCAD, preparation of RTU Datasheets, Prepare
FAT/SAT protocols. Carry out FAT activity.
Designed, installed and commissioned SAS for 500kV grid station of 1230MW RLNG Balloki Power
Plant
Designed, installed and commissioned SAS for 110kV/10kV AIS of Naghlu Hydro Power Plant
(Afghanistan) –
Unrestricted
Installation and commissioning of SAS for 132/11kV AIS of Agha Khan Substation
Installation and commissioning Load Management System at Younus Textile Mills.
Designed, installed and commissioned of Event recorder system for NOR31 (WAPDA)
Protocols used: IEC 61850, DNP3, MODBUS, IEC 60870-5-101/104 Substation automation protocols.
Protocols Conversion: IEC 61850 to 101/104, IEC6185 to MODBUS
Secondary Injection Set Used: ISA DRTS6
INTECH PROCESS AUTOMATION (JAN 2014 – M ARCH 2016)
I worked in INTECH Process Automation, as Design and Application Engineer in North
America BU
Projects
San Alberto Compression Facility ICSS FGS - EXTERRAN BOLIVIA
Complete Process Control System of Compression and Inlet facility using Rockwell AB L-74 PLC
Logic development on RSLogix 5000 studio.
HMI development using Factory Talk SE.
Implementation of Safety Instrumented System (SIS)
Complete Safety System implementation using ICS Triplex (AADvance Sytem) – T-9110
Conducting Internal Factory Acceptance Test (IFAT) as well as FAT.
CARDON IV Early Gas Production Development -Vanezvela
Implementation of Basic Control Systems (BCS) as well as Safety Instrumented System (SIS) of
three off shore platforms using Rockwell SCADA and MMIs.
Implementation of Safety Instrumented System (SIS) by customer provided Cause and Effect
matrix.
Logic application for three platforms using RSLogix 5000 on Allen Radley PLC L75.
HMI application for three platforms including SCADA and MMIs using FT View SE and FT View
ME
Provide field commissioning and customer training assistance in support of Site Execution
Team.
Conducting Internal Factory Acceptance Test (IFAT) as well as FAT.
As-built documentation of the project
SIEMENS ENGINEERING CO LTD (FEB 2012 – DEC 2013)
Worked in SIEMENS (Pakistan), as Project Engineer in Expert House (Industry Sector), previously CIP
Projects
Engineering and commissioning of Poultry Feed Plant using Wincc and Step 7 (S-400 PLC),
Islamabad Feeds Mill, Okara
Relay logic to PLC conversion of Cigarette making machine (Mollins Mark9) and its integration
with Max-S machine, Pakistan Tobacco Company (Akora Khattak) Nowshera
PLC logic modification of Mollins Mark9 machines and integration of latest HMI touch panels,
Pakistan Tobacco Company (Akora Khattak) Nowshera
Complete automation of cigarette case packer machine, HLP-180, Khyber Tobacco Company,
Mardan.
EMERSON PROCESS MANAGEMENT ASIA PACIFIC, (JUNE 2010-FEB 2012)
I worked in EMERSON Process Management Asia Pacific, in Pakistan as Instrumentation and Controls
Engineer in Power and Water Solutions (PWS) Division.
Projects
Halmore 225MW CCPP Bhikki Power Plant
Unrestricted
o Installation and commissioning of complete Ovation Distributed Control System at Halmore
Power Generation (225MW CCPP).
K.E.S.C BQPS 1 210MW Retrofit Project
o Installation and commissioning of complete Ovation Distributed Control System at K.E.S.C
BQPS 1 (210MW).
Conducting KESC plant Operators training.
INDUSTRIAL TRAININGS
SICAM PAS/PQS, SICAM SCC, SICAM RTU training at SIEMENS LLC (Abu Dhabi)
SICAM AK3/AK1703 ACP RTU training at SIEMENS AG (Austria)
OV200-Win-Building & Maintaining Ovation Controls by Emerson Process Management
MANAGEMENT TRAININGS
Building High Performance Teams at Lahore University of Management Sciences (2015)
Unrestricted
