Scribd
Upload
2K views11 pages

Astm Table

This document provides tables with density and volume correction factor (VCF) values for Nile Blend crude oil at different temperatures. It gives density and VCF values measured in kg/m3 and calculated values in barrels for temperatures ranging from 36 to 40 degrees Celsius. It also shows the loaded quantity in metric tons and cubic meters at a given temperature along with equivalent barrels that would be measured at 60 degrees Fahrenheit.

Uploaded by

George Masvoulas
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
2K views11 pages

Astm Table

This document provides tables with density and volume correction factor (VCF) values for Nile Blend crude oil at different temperatures. It gives density and VCF values measured in kg/m3 and calculated values in barrels for temperatures ranging from 36 to 40 degrees Celsius. It also shows the loaded quantity in metric tons and cubic meters at a given temperature along with equivalent barrels that would be measured at 60 degrees Fahrenheit.

Uploaded by

George Masvoulas
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 11

A.S.T.M.

TABLES
GRADE TEMPERATURE DENSITY 15C DENSITY air SPECIFIC GRAVITY 60F T11 - (LT/Bbls) T13 - (MT/Bbls) T52 - (M3/Bbls) NILE BLEND CRUDE OIL
0.8722

QUALITY
F

FUEL 11.34 Temp.F 96.8 98.6 100.4 102.2 104.0

38.00 0.9900 0.9889 0.9906 0.15469 0.15717 0.15893

API VCF T.54B 0.9856 0.9849 0.9842 0.9836 0.9829 Density @ 0.9747 0.9740 0.9733 0.9727 0.9720 VCF T.6B 0.9860 0.9853 0.9846 0.9839 0.9832

Temp.C 36.00 37.00 38.00 39.00 40.00

QUANTITY TO LOAD WEIGHT MT (AIR) M3 @ TEMP BBLS @ TEMP BBLS @ 60F (6B) WEIGHT MT (VAC) M3 @ 15C (54B)

22 22 23 142 140 22 22

MT (AIR)

REMARQUES :

1/ Enter Name of GRADE : optional

HOW TO USE

2/ Enter Maximum Temperature of the cargo ( at loading port or during voyage ), select " C " or " F " 3/ Select Type of Grade : " CRUDE " or " PRODUCTS " - If " CRUDE " TABLES 54A and 6A are selected, - If " PRODUCTS " TABLES 54B and 6B are selected, - Type of product ( FUEL, JET, GASOLINE ) will be automatically selected according to API 4/ Enter API 5/ Enter the Quantity to load and select the relevant unit : - MT - BBLS/60F - M3 @ Temp ( Trick : Enter the volume at 98 % in " M3 @ Temp " or in " BBLS @ Temp " and save the blank file as " Template " ) 6/ Select the variation of Degree Celsius to get different figures of VCF and Density @ Temp ( default is " 1C " ) 7/ Enjoy it ( not optional )

You might also like