A NEW SENSE EMBEDDED SMART CAR WITH
FACE RECOGNITION SECURITY SYSTEM
PHASE – I PROJECT REPORT
Submitted by
PRASANNA.B (070107302028)
REX VINOD.A (070107302040)
VEEMAN.N (070107302052)
in partial fulfillment for the award of the degree
of
BACHELOR OF ENGINEERING
in
ELECTRONICS AND COMMUNICATION ENGINEERING
ERODE SENGUNTHAR ENGINEERING COLLEGE
ERODE-638057
ANNA UNIVERSITY OF TECHNOLOGY
COIMBATORE-641047
OCTOBER 2010
i
ANNA UNIVERSITY OF TECHNOLOGY
COIMBATORE 641047
BONAFIDE CERTIFICATE
Certified that this project report “A NEW SENSE EMBEDDED SMART CAR WITH
FACE RECOGNITION SECURITY SYSTEM” is the bonafide work of
PRASANNA.B (070107302028)
REX VINOD.A (070107302040)
VEEMAN.N (070107302052)
who carried out the phase – I project work under my supervision.
SIGNATURE SIGNATURE
Mrs.M.N.SRI NITHYA M.E., Mrs.R.KALAIVANI M.E.,
Lecturer Assistant Professor
Electronics & Communication Engineering Electronics & Communication Engineering,
Erode Sengunthar Engineering College, Erode Sengunthar Engineering College,
Thudupathi, Thudupathi,
Erode-638057. Erode-638057.
------------------------------ ------------------------------
Internal Examiner External Examiner
ii
ACKNOWLEDGEMENT
We wish to express our sincere thanks to our beloved Correspondent
Thirumathi. S.VASANDHA SUDHANANDHEN, M.A,B.Ed., and the management of Erode
Sengunthar Engineering College for the ample facilities made available.
We express our deep sense of gratitude and heartful thanks to esteemed principal
Dr.ARUN.V.PARWATE,M.E,PhD., for providing an opportunity for undertake this project
work.
We express our profound gratitude and acknowledge our Head of the Department
Mrs.R.KALAIVANI, M.E., who gave us valuable advice and whole hearted co-operation for
completion of this project.
We express our heart full thanks to our internal project coordinator Mrs. K.KAVITHA,
M.E., & internal project guide Mrs. M.N.SRI NITHYA, M.E., for their guidance and co-
operation for successful completion of this project.
We also thank all the teaching and non-teaching staffs of Electronics and Communication
Engineering department and all our friends for their support, encouragement and assistance.
Added to this, we express our indebtedness to our PARENTS for their affectionate
blessing co-operation at all stages of this academic venture.
iii
TABLE OF CONTENTS
CHAPTER NO. TITLE PAGE NO.
Abstract vi
List of Tables vii
List of Figures viii
List of Abbreviations ix
1 Introduction 1
1.1 Objective 1
2 System Analysis 2
2.1 Existing System 2
2.1.1Drawbacks 2
2.2 Proposed System 2
2.3 Feasibility Study 3
2.3.1 Economical Feasibility 3
2.3.2 Operational Feasibility 3
2.3.3 Technical Feasibility 3
3 System Specification 4
3.1 Hardware Requirements 4
3.2 Software Requirements 4
4 Software Description 5
4.1 MATLAB 5
4.2 ORCAD 5
5 Project Description 7
5.1 Overview of the Project 7
5.2 Module Description 10
5.2.1 INTEL 8051 Architecture 10
5.2.2 GPS SYSTEM 17
iv
5.2.3 GSM Modem 19
5.2.4 Power Supply 20
5.2.5 Stepper Motor 21
5.2.6 RS232 Communication 22
5.2.7 Relay Introduction 23
6 Conclusion & Future Enhancements 26
6.1 Conclusion 26
6.2 Future Enhancements 27
7 References 28
ABSTRACT:
In modern world, many new techniques such as biometric recognition technique, image
processing technique, communication technique and so on, have been integrated into car security
systems. Traditional car security systems rely on many sensors and cost a lot. When one car is
really lost, no more feedback could be valid to help people to find it back.
In proposed system we introduced a low-cost extendable framework for embedded smart
car security system is proposed, which consists of a face detection subsystem, a GPS (Global
Positioning System) module, a GSM (Global System for Mobile Communications) module and a
control platform. The face detection subsystem based on optimized PC algorithm and can detect
faces in cars during the period in which nobody should be in the car, and make an alarm loudly
or soundlessly. The other modules transmit necessary information to the owner and the control
room and help to keep eyes on cars all the time, even when the car is lost. The location of the
vehicle is spotted perfectly by GPS modem. The GPS modem sense particular latitude and
longitude and gives it to GSM module which sends the information to the user through SMS
Technology.
vi
LIST OF TABLES
TABLE NO. TABLE NAME PAGE NO.
5.1 Port 3 Features 13
5.2 Evolution of Microcontrollers 15
vii
LIST OF FIGURES
FIGURE NO. FIGURE NAME PAGE NO.
5.1 Block Diagram 9
5.2 Block Diagram of the 8031 Core 11
5.3 Pin Configuration of 8031 12
5.4 8031 Microcomputer Pinout Diagram 12
5.5 Crystal Oscillator 14
5.6 Block Diagram of GPS System 17
5.7 Block Diagram of GSM 19
5.8 Block Diagram of Power supply 20
5.9 Stepper Motor 21
5.10 Relay 23
5.11 Working Principle of Relay 24
viii
LIST OF ABBREVIATIONS
GPS Global Positioning System
GSM Global System For Mobile Communication
SMS Short Message Service
MMS Multimedia Message Service
AC Air Conditioner
PCB Printed Circuit Board
HDL Hardware Description Language
CIS Component Information System
GPRS General Packet Radio Service
SIM Subscription Identification Module
DTE Data Terminal Equipment
DCE Data Control Terminating Equipment
CTS Clear To Send
RTS Request To send
DTR Data Terminal Ready
DSR Data Set Ready
PCMCIA Personal Computer Memory Card International Association
ix
