Scribd
Upload
357 views7 pages

Win Fiol Command

The document contains various commands used to check cell parameters, neighbor relations, frequencies, transmission links, GPRS configuration, power settings and more. Some example commands are RLDEP to check CGI and BSIC, RLCFC to add TCH frequencies, RXAPP to print Abis paths, and RLSBP to check if a cell is barred.

Uploaded by

behnam_dorudian
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
357 views7 pages

Win Fiol Command

The document contains various commands used to check cell parameters, neighbor relations, frequencies, transmission links, GPRS configuration, power settings and more. Some example commands are RLDEP to check CGI and BSIC, RLCFC to add TCH frequencies, RXAPP to print Abis paths, and RLSBP to check if a cell is barred.

Uploaded by

behnam_dorudian
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

!to check All Neighbors of One Cell rlnrp:cell=t8391xb,cellr=all,nodata; !

to define one way neighbour rlnri:cell=t9175xb,cellr=t9176xb,single;

!To check CGI and BCCH/BSIC LAC of Once Cell RLDEP:CELL=XXXXXXX; !To check how many SDCCH's are there in one cell RLCFP:Cell=t9169xb;

!To add SDCCH RLCCC:CELL=T8954XB,CHGR=0,SDCCH=4,CBCH=YES,TN=1&&4;

!To check if all the TS's of the cell are taking traffic RLCRP:CELL=t9316xa;

!to check which sites are down RLCRP:CELL=ALL;

!To change OFFSETN and AWOFFSET rlnrc:cell=t8853xc,cellr=t8661xb,offsetn=5; rlnrP:cell=t8853xc,cellr=t8661xb;

exit;

!To delete neighbor relation rlnre:cell=T8391XC,cellr=T8972XC;

!to change some parameters like MAXRET,CRO,PT,... RLSBC:CELL=T8801XC,MAXRET=2;

!This command deactivates support for GPRS in the specified cell. RLGSE:CELL=cell; RLGSp:CELL=cell;

!This command activates support for GPRS in a cell. RLGSI:CELL=cell;

!This command initiates printing of all alarm situations RXASP:MOTY=RXOTG; RXASP:MO=RXOTG-38;

!To get TG of a specific cell RXTCP:MOTY=RXOTG,CELL=T8853XA;

! STDSP:DETY=RALT2,BSC=OWN;

!This command initiates printing of fault information for one or more managed object

RXMFP:MO=RXOTG; RXMFP:MO=RXORX-411-1;

!The command is used to print cell measurement frequencies that are printed in the answer printout CELL MEASUREMENT FREQUENCIES. RLMFP:CELL=t7676xa;

!To check transmision link rxtcp:moty=rxotg,cell=T8798xa; dtqup:dip=165rbl2; dtqup:dip=8rbl2; dtqdp:dip=7rbl2; dtqdp:dip=8rbl2;

!To check if site is active or halted !The command initiates the answer printout CELL STATUS RLSTP:CELL=T9316XA;

!To check if TRXs are blocked rxcdp:MO=RXOTG-41;

!to check CGI and BSIC and BCCH rldep:cell=t8853xb;

!To Check Transmission Link

!This command generates a printout containing the quality situation for the specified Digital Paths (DIP). dtqup:dip=42RBL2;

!This command prints all defined Abis paths concerning a given TG, several TGs or all TGs in the BTS. RXAPP:MO=RXOTG-473;

!RXMOP:MO=RXOTG-38;

!To Halt a sector RLSTC:CELL=T8575XC,STATE=HALTED; !To Active a sector RLSTC:CELL=T8575XC,STATE=ACTIVE;

!For SOFT RESET of a site: RXBLI:MO=RXOTG-104,subord,FORCE; rxese:mo=rxotg-104,subord; rxesi:mo=rxotg-104,subord; RXBLE:MO=RXOTG-104,subord;

!To check if cell is manually blocked (BLSTATE: MBL) rxmsp:MO=RXOCF-418;

!To add neighbor RLNRI:cell=T7412XB,cellr=T8058XC;

RLMFC:cell=t7456xb,MBCCHNO=2,MRNIC;

!To check if cell is barred or not (when it doesn't get traffic) rlsbp:cell=t8315xa; !CB : Yes

!This command prints all defined Abis paths concerning a given TG, several TGs or all TGs in the BTS RXAPP:MO=RXOTG-3;

!To reduce power RLCPC:CELL=t8860xa,bspwrb=42; RLCPC:CELL=t8860xa,sctype=ul,bspwrt=42; !If we don't have subcell structure (OL & UL) RLCPC:CELL=t9474xb,bspwrb=42,bspwrt=42;

!To change locating parameter after reducing power RLLOC:CELL=T8860XA,BSPWR=43; RLLOC:CELL=T8860XA,SCTYPE=UL,BSTXPWR=43,BSRXMIN=100; !If we don't have subcell structure (OL & UL) RLLOC:CELL=T8860XA,BSPWR=43,BSTXPWR=43,BSRXMIN=100;

!Print GPRS Status and configuration RLGSP: CELL=T7655xc; rlbdp:cell=t7655xa; RLGRP: CELL=WW54891;

!To change AWOFFSET (Assigned to worst cells RLNRC:CELL=T8972XA,CELLR=T8956XA,AWOFFSET=5;

! RLDMC:CELL=T9437XC,DMTHAMR=100,DMTHNAMR=100,DMQB=OFF,DMQBAMR=45,DMQBNAMR=35, DMQG=OFF,DMQGAMR=20;DMQGNAMR=15;

!To check CONFACT rxmop:mo=RXOTG-86;

!To Change CHAP RLHPC:CELL=C1A&C1B,CHAP=0;

! To find BCCH rldep:cell=T7328XB;

! To add TCH frequencies

1-RLCFI:CELL=T0872YB,CHGR=1,DCHNO=24&26&33; foe add new frequencies 2-RLCFE:CELL=T0872YB,CHGR=1,DCHNO=25&34&36; for delete the previous frequencies

! to check the halted site rlstp:cell=T9712XA;

dtqup:dip=17RBL2; rxapp:mo=rxotg-17;!****Gives RBLT Mapping on TG****!

You might also like