WinFIOL Commands
To check BSC and MSC list in the Network eac_esi_config -nelist
//msc & bsc list
To check cell status and call status/ To Check speech on time slot (Cell down or not and call is processing or not )
RLCRP:CELL=CELLNAME; RLCRP:CELL= ALL;
//FOR CHECKING CALL IN A PARTICULAR CELL
// FOR CHECKING CELL STATUS IN A PARTICULAR BSC
To check planned parameters RLDEP:CELL=CELLNAME;
//CHECKING CGI,BSIC, BCCH OF CELL
NEIGHBOR DEFINITION & DELETION
To check/work on neighbor related data
//CHECK NEIGHBOUR RELATION OF A PARTICULAR CELL RLNRI:CELL=CELLNAMR,CELLR=CELLNAME; //CREATE NEIGHBOUR RELATION WITH A CELL RLNRE:CELL=CELLNAME,CELLR=CELLNAME; //DELETE A PARTICULAR NEIGHBOR RELATION RLNRC:CELL=CELLNAME,PARAMETER=?; //CHANGE A NEIGHBOUR PARAMETER VALUE RLNRI:CELL=CELLNAMR,CELLR=CELLNAME,SINGLE; //CREATE INTER BSC NEIGHBOR RELATION RLNRP:CELL=CELLNAME,CELLR=ALL,NODATA;
ALARM CHECK
RXTCP:MOTY=RXOTG,CELL=CELLNAME; //FOR CHECKING A TG NO OF A SITE
RXASP:MO=RXOTG - TGNO; //CHECKING ALARM ON PARTICULAR TRX RXMFP:MO=RXOtg-Tg no, subord, faulty; RXMFP:MO=RXOTRX-Tg No.- TRx no, subord, faulty;
ACTIVE & HALT STATE
RXSTP:CELL=CELLNAME,STATE=HALTED; //USED WHEN PARAMETER CHANGE RXSTC:CELL=CELLNAME,STATE=ACTIVE; //CHANGE STATE OF SITE TO ACTIVE AFTER SUCCESSFUL PARAMETER CHANGE
TRX BLOCK
RXTCP:MOTY=RXOTG,CELL=CELLNAME; //CHECK TG NO
RXCDP:MO=RXOTG-TGN0;
//ON WHICH PARTICULAR TRX BCCH IS
DEFINED & TO CHECK TRX DETAILS
RXBLI:MO=RXOTRX-TGNO-TRx No,FORCE,SUBORD; // BLOCKING OF PARTICULAR TRX RXBLE:MO=RXOTRX-TGNO-SUBORD; //DEBLOCKING OF PARTICULAR TRX
PARAMETER CHANGE
RLDEC:CELL=CELLNAME,BCCHNO=?; //CHANGE BCCH OF a particular cell RLDEC:CELL=CELLNAME,BSIC=?; RLDEC:CELL=XXX,CGI=XXX; //CHANGE BSIC OF a particular cell // CGI CHANGE
To check/change HSN
rlcfp:cell=cell name;
rlchc:cell=cell name, CHGR=1, HSN=35; //CHANGE HSN OF a particular cell
To check/change POWER
RLCPP:CELL=CELL NAME; RLCPC:CELL=CELLNAME,BSPWRB=?; //Power check //power change
PARAMETER CHANGE
TO change CGI in MSC
mgoce:cell=cellname; mgoci:cell=cellname ,cgi=404-53-,MSC=MSC name; mgocp:cell=cellname; //DELETES CELL FROM MSC //CREATES CELL IN MSC //Display cell list in MSC
To check/change HR
RLDHP:CELL=CELLNAME; RLDHC:CELL=CELLNAME,DTHAMR=?; //To check HR status on that particular cell //To change HR status on that particular cell
To check/enable DTX
RLCXP:CELL=ALL; RLCXC:CELL=CELL NAME, DTXD=ON; // To check DTX on or not(DL) //To change DTX status(DL)
PARAMETER CHANGE
To check/change ACCMIN and RLT
RLSSP:CELL=ALL; //To check ACCMIN,CCHPWR,CRH, UPLINK DTX, RLT RLSSC:CELL=CELL NAME,ACCMIN/RLINKT etc=?; //To change ACCMIN,CCHPWR,CRH, UPLINK DTX, RLT
To check BA list
RLMFP:CELL=CELLNAME;
TA LIMIT(CHECK/CHANGE) & MEDIA FLICK
RLLUP:CELL=CELLNAME; RLLUC:CELL=CELLNAME, TALIM=?;
//CHECK TA LIM OF CELL //CHANGE TA LIM OF CELL
MEDIA FLICK
RXAPP:MO=RXOTG-TGNO.; RADEP:DEV=DEVNAME; NTCOP:SNT=ETM2-V; DTQDP:DIP=DIP NAME;
EXTERNAL CELL CREATION
RLDEI:CELL=XXX,EXT,CSYSTYPE= GSM900; RLDEC:CELL=XXX,CGI=XXX,BSIC=XXX,BCCHNO=XXX; RLCPC:CELL=XXX,MSTXPWR=33; RLLOC:CELL=XXX,BSRXSUFF=150,MSRXSUFF=0,SCHO=OFF,AW=OFF, MSRXMIN=100,BSRXMIN=121,BSPWR=55,EXTPEN=OFF,BSTXPWR=55,MISSNM=3; RLLHC:CELL=XXX,LAYER=2,LAYERTHR=75,LAYERHYST=2,PSSTEMP=0,PTIMTEMP= 0;
// RUN ALL THE FIVE COMMANDS FOR EXTERNAL CELL CREATION BEFORE HANDOVER DEFINITION
NOKIA OSS
ZEEI:BTS=XXX; //SEE CELL STATUS ZEOL:BCFNO; //CHECK ALARMS ZEEI:BCFNO; // SHOWS STSTUS FOR COMPLETE SITE ZEQO:BTS=XXX:ALL; //SEE ALL PARAMETERS ZEAC:BTS=XXX::ABTS=XXX; //DEFINE HO SAME BSC ZEAC:BTS=XXX::MCC=404,MNC=55,LAC=XXX,CI=XXX:NCC=2,BCC=5,FREQ=XX X; //DEFINE HO DIFF BSC ZEAD:BTS=XXX::LAC=XXX,CI=XXX ; // DELETE CELL
THANK YOU
SAMAHIL SETHI
