ATOMIZATION OF LIQUID FUELS
COMBUSTION AND FUELS
THE PRINCIPLE OF LIQIUDS ATOMIZATION
Atomisation is the process whereby bulk liquid is transformed into a collection of drops. This transformation goes through the break-up of liquid jet into number of filaments, which in turn transform into droplets.
COMBUSTION AND FUELS
MECHANISMS OF LIQIUDS ATOMIZATION
Three mechanisms:
Disintegration of a liquid jet into a number of filaments, and then into small droplets, requires the surface tension forces of liquid to be overcome. It may happen on the three ways: by surface tension between moving liquid jet and steady air which destabilise the jet and causes its disintegration into filaments, by centrifugal forces of swirled liquid jet,
outer mechanical and electrostatic forces and by supersonic acoustic.
COMBUSTION AND FUELS
FLUID ATOMIZATION WITH DIFFERENT ENERGY
COMBUSTION AND FUELS
JETS DISINTEGRATION AND DROPLETS BREAKUP
Primary liquid jet disintegration
Droplets break-up
COMBUSTION AND FUELS
RANGE OF LIQUID ATOMIZATION
Re = (UL)/ We = (U2L)/ - the surface tension
coefficient
COMBUSTION AND FUELS
INFLUENCE OF PRESSURE-INJETION ON ATOMIZATION EFFECTIVENESS
5 bars
10 bars
15 bars
TORCH OF PLAIN-ORIFICE ATOMIZED OIL
LIQIUD SHEET BREAKUP
Swirled jet
COMBUSTION AND FUELS
TYPES OF OIL INJECTORS/ATOMISERS
Types of atomizers: - pressure
plain-orifice
swirl type Y type
- pneumatics
with x- cross shape flow
- rotating
COMBUSTION AND FUELS
PRESSURE INJECTORS
COMBUSTION AND FUELS
PLAIN-ORIFICE ATOMISER
Do > 0.5 mm p = 0.3-1(5) MPa = 5-15o Simple construction, Low quality of atomisation
COMBUSTION AND FUELS
SWIRL ATOMIZERS
COMBUSTION AND FUELS
HOW A SWIRL NOZZLE WORKS
COMBUSTION AND FUELS
SWIRL NOZZLE:
DESIGN
do = 2-6 mm p = 0.6-1.0 MPa = 45-90o Simple construction High reliability High quality of atomisation Low energy consumption
COMBUSTION AND FUELS
SWIRL NOZZLE: AN EXAMPLE
COMBUSTION AND FUELS
COMPACT SWIRL ATOMISER
COMBUSTION AND FUELS
TYPE OF FUEL CONES
Delavan COMBUSTION AND FUELS
SWIRL ATOMISER IN OPERATION
Dispersed oil jet COMBUSTION AND FUELS
PNEUMATIC ATOMISERS
COMBUSTION AND FUELS
PNEUMATIC ATOMISER: PRICIPLE OF OPERATION
liquid fuel atomizing medium air / steam
recirculating small droplets
air jet layer of fuel around the atomizing medium
deformation wave of fuel small droplets formed outside of the stream dispersion of the stream small droplets formed from the stream big droplets formed from the disintegration of the stream abut 5 x diameter of atomizing nozzle
abut 40 x diameter of atomizing nozzle
Consumption of atomising medium: =0.06-0,1 kg/kg COMBUSTION AND FUELS
PNEUMATIC ATOMISER OF Y TYPE
Pneumatic atomizer of Y type: 1 oil, 2 gas, 3 atomising head, 4 nozzles
COMBUSTION AND FUELS
PNEUMATIC ATOMISER OF CROSS-SHAPE FLOW TYPE
Pneumatic atomizer of the cross-shape flow type: 1 oil, 2 gas, 3 oil injection, 4 gas injection, 5 mixing chamber, 6 - nozzles
COMBUSTION AND FUELS
ROTATING ATOMISERS
COMBUSTION AND FUELS
How does operate rotating atomizer?
OIL BURNER WITH ROTATING ATOMISER
SAACKE
COMBUSTION AND FUELS
CONTROL OF OIL FLOW RATE
COMBUSTION AND FUELS
ATOMISATION PRESSURE VARIATION
1. The simplest way for oil output/consumption control is variation of pressure of atomisation. 2. Disadvantage of this method of output control is loss of atomisation quality due to reduction of atomisation pressure. Rate of oil output (p)0.5
COMBUSTION AND FUELS
Two-step control of oil flow rate
Scheme of single chamber two-step oil atomizer: 1 valve, 2, 3 recalculating pipes
COMBUSTION AND FUELS
CIRCLE MECHANICAL (RETURN- FLOW) ATOMIZER
Oil tank
Fuel nozzle
Valve
Nozzle Pump COMBUSTION AND FUELS
RETURN OIL INNER CIRCLE ATOMIZER
CIRCLE OIL ADJUSTING VALVE
1 VALVE, 2 SWIRL CHAMBER, 3 OIL CIRCLE HOLES
COMBUSTION AND FUELS
TWO-NOZZLES ATOMIZER
I nozzle II - nozzle
COMBUSTION AND FUELS
QUALITY OF ATOMISATION
COMBUSTION AND FUELS
PARAMETERS OF ATOMIZATION
output, kg/s angle of dispersion, deg droplets distribution, mean diameter of dispersion, m.
COMBUSTION AND FUELS
CHARACTERISTICS OF ATOMIZING NOZZLE
COMBUSTION AND FUELS
OUTPUT of PRESSURE ATOMIZERS
Output m of pressure atomizers is defined as follows:
m = A(2c p)0,5
where: A is the area of nozzle output, p is pressure and is the outflow coefficient.
COMBUSTION AND FUELS
DROP SIZE DISTRIBUTION
Drop size distribution curves
COMBUSTION AND FUELS
CHARACTERISTIC OF DROPLETS SIZE Mean drop size:
mean drop size SRK = [(nD3/nD)]0,5, mean drop size of Sauter SMD = nD3/ nD2.
COMBUSTION AND FUELS
