Model LCR55
Handheld Component Tester
LCR55 Specifications (at 23 C 5 C, < 75 % R.H. non-condensing)
Resistance
Ranges Accuracy 20 , 200 , 2 k, 20 k, 200 k, 2 M, 20 M 20 1.2 % rdg (zero adjust) 200 (0.5 % rdg + 3 dgts) 2 k-2 M (0.5 % rdg + 1 dgt) 20 M (2.0 % rdg + 2 dgts) 10 m in 20 range 20 range: 6.5 V DC 200 range: 3.0 V DC All other ranges: 1.2 V DC 2 k range: Tone at R < 30 800 ms approx. 1 mA (approx.) 3.0 V DC (1.5 % rdg + 1 dgt) Forward junction voltage 0.6 mA approx. 7.0 V DC typical (3.0 % rdg + 1 dgt) Forward junction voltage 200 pF, 2 nF, 20 nF, 200 nF, 2 F, 20 F, 200 F, 2000 F 200 pF to 200 nF: (1.0 % rdg + 1 dgt) 2 F to 200 F: (2.0 % rdg + 1 dgt) 2000 F: < 1000 F: (3.0 % rdg + 3 dgts) > 1000 F: (5.0 % rdg + 5 dgts) Note: In lower ranges, subtract 6 points residual offset reading from result 200 pF to 2 F: 1000 Hz 20 F to 200 F: 100 Hz 2000 F: 10 Hz < 0.5 F: 0.1%/C > 0.5 F: 0.2%/C 200 H, 2 mH, 20 mH, 2 H, 20 H, 200 H 200 H: (5.0 % rdg + 30 dgts)* 2-200 mH: (3.0 % rdg + 20 dgts)* 2-200 H: (5.0 % rdg + 20 dgts)* 200 H to 2 H ranges: 1000 Hz 20 H to 200 H ranges: 100 Hz < 0.5 H: 0.2%/C > 0.5 H: 0.5%/C 0 to 1000 3 A approx. 3.0 V DC approx. 10 nA to 20 A 350 V DC or AC rms 0.1 A/250 V fast acting fuse 350 V DC or AC rms 350 V DC or AC rms 350 V DC or AC rms 0.1 A/250 V fast blow fuse
Component Tester
Resolution Open Circuit Voltage
Continuity
Audible Indication Response Time
Diode Test
Test Current Test Voltage Accuracy Display
Microwave Diode Test
Test Current Test Voltage Accuracy Display
Capacitance
Ranges Accuracy
The ultimate component
checker measures inductance, capacitance, resistance, transistors, diodes and microwave diodes
Test Frequency
Temperature Coefficient
Inductance
Range Accuracy
Plug-in test slots and test
leads
Test Frequency Temperature Coefficient
Oversized, read-at-a-glance
display
Transistor Test
hFE Range hFE Base Current hFE Voltage C - E Iceo Range, Leakage Current
Data Hold and Max Hold Auto-off
Overload Protection
Resistance Capacitance Continuity Diode Test Micro Wave Diode Test Inductance *For values of Q 7
Model LCR55
Handheld Component Tester
General Specifications
Display: 312 digit LCD, max reading of 1999; Display Update Rate: 2.5 /sec, nominal; Power: Standard 9 V transistor battery; Battery Life: Alkaline 200 hours; Operating Temperature: 0 C to + 50 C (32 F to 122 F), < 70 % R.H.; Storage Temperature: - 20 C to + 60 C (- 4 F to 140 F), < 80 % R.H. battery removed; Dimensions (WxLxH): 183 x 79 x 38 mm (7.2 x 3.1 x 1.5); Weight (incl. batteries): 311 g (11 oz.); Included Accessories: Test leads, spare fuse, battery, (1) pair alligator clips, and operators manual
Component Tester
Features
Zero Adjust Pot for Ohms; Low Battery Indication; Auto-Power Off: after 60 minutes after no function or range change; Warranty: One-year
Optional Accessories
H30Y Protective Holster; VC221A Vinyl Case; DL243C Basic Test Lead Kit; DL248C Deluxe Test Lead Kit; TL245 Test Lead Set For additional accessories, see the Accessories Compatibility Guide at www.metermantesttools.com
N10140
Meterman. The right tool for the job.
Meterman Test Tools website: www.metermantesttools.com email: info@metermantesttools.com 6920 Seaway Blvd. Everett, WA 98203 fax: 425-446-4882 tel: 877-596-2680 Meterman Test Tools Europe P.O. Box 1186 5602 BD Eindhoven The Netherlands
2002 Meterman Test Tools. All rights reserved. Printed in U.S.A. 1/2002 1646419 D-ENG-N Rev A
