Smart-UPS
APC Smart-UPS 750VA USB & Serial 230V
Standard Lead Time: Usually in Stock
APC Smart-UPS, 500 Watts / 750
VA,Input 230V / Output 230V, Interface Port
DB-9 RS-232, USB, SmartSlot
Includes: CD with software, Smart UPS
signalling RS-232 cable, USB cable, User
Manual
Smart-UPS Features & Benefits
SUA750I Features
USB Connectivity Provides management of the UPS via a USB port (not available on all
models).
Battery replacement
without tools
Allows quick, easy battery replacement.
Front-access servicing Simplifies installation and maintenance while minimizing space
requirements.
Availability
Boost and Trim
Automatic Voltage
Regulation (AVR)
Gives higher application availability by correcting low and high voltage
conditions without using the battery.
Intelligent Battery
Management
Maximizes battery performance, life, and reliability through intelligent,
precision charging.
Power conditioning Protects connected loads from surges, spikes, lightning, and other power
disturbances.
Temperature-
compensated battery
charging
Prolongs battery life by regulating the charge voltage according to battery
temperature.
Automatic restart of
loads after UPS
shutdown
Automatically starts up the connected equipment upon the return of utility
power.
Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be
replaced.
Cold-start capable Provides temporary battery power when the utility power is out.
Disconnected battery
notification
Warns when a battery is not available to provide backup power.
Generator Compatible Ensures clean, uninterrupted power to protected equipment when generator
power is used.
Manageability
Network manageable Provides remote management of the UPS over the network.
SmartSlot Customize UPS capabilities with management cards.
Audible Alarms Actively let you know if the unit is on battery, if the battery is low or if there
is an overload condition.
LED status indicators Quickly understand unit and power status with visual indicators.
Serial Connectivity Provides management of the UPS via a serial port.
USB Connectivity Provides management of the UPS via a USB port (not available on all
models).
Disconnected battery
notification
Warns when a battery is not available to provide backup power.
InfraStruXure
Manager Compatible
Enables centralized management via the APC InfraStruXureManager.
Serviceability
User-replaceable
batteries
Increases availability by allowing a trained user to perform upgrades and
replacements of the batteries reducing Mean Time to Repair (MTTR)
Hot-swappable
batteries
Ensures clean, uninterrupted power to protected equipment while batteries
are being replaced
Predictive failure
notification
Provides early-warning fault analysis ensuring proactive component
replacement.
Resettable circuit
breakers
Enables a quick recovery from overload events.
Adaptability
Adjustable voltage-
transfer points
Maximizes useful battery life by widening the input voltage window or
tightening the output voltage regulation.
Adjustable voltage
sensitivity
Provides the ability to adapt the UPS for optimal performance in specific
power environments or generator applications.
Field-replaceable
power distribution
panel
Ensures compatibility with equipment that has different plug types.
Safety
Safety-agency
approved
Ensures the product has been tested and approved to work safely with the
connected service provider equipment and within the specified environment.
UL, FCC, CE, C-Tick approvals.
Output
Output Power Capacity 500 Watts / 750 VA
Max Configurable Power 500 Watts / 750 VA
Nominal Output Voltage 230V
Output Voltage Note Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion Less than 5% at full load
Output Frequency (sync to mains) 47 - 53 Hz for 50 Hz nominal,57 - 63 Hz for 60 Hz nominal
Crest Factor up to 5 : 1
Waveform Type Sine wave
Output Connections
(6) IEC 320 C13
(1) IEC J umpers
Input
Nominal Input Voltage 230V
Input Frequency 50/60 Hz +/- 3 Hz (auto sensing)
Input Connections
IEC-320-C14 inlet
Input voltage range for main
operations
160 - 285V
Input voltage adjustable range for
mains operation
151 - 302V
Batteries & Runtime
Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
Typical recharge time 3 hour(s)
Replacement Battery RBC48
RBC Quantity 1
Typical Backup Time
at Half Load
16.4 minutes (250 Watts)
Typical Backup Time
at Full Load
4.8 minutes (500 Watts)
Runtime Chart Smart-UPS
Energy Use/Efficiency
View Enlarged Chart
Curve fit to measured efficiency data. All measurements taken in
normal operating mode, at typical environmental conditions, with
nominal electrical input and resistive load output.
Communications & Management
Interface Port(s) DB-9 RS-232,USB,SmartSlot
Available SmartSlot Interface
Quantity
1
Control panel LED status display with load and battery bar-graphs and On Line : On Battery :
Replace Battery : and Overload Indicators
Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays
Emergency Power Off (EPO) Optional
Surge Protection and Filtering
Surge energy rating 340 J oules
Filtering Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping
response time : meets UL 1449
Physical
Maximum Height 157.00 mm
Maximum Width 137.00 mm
Maximum Depth 358.00 mm
Net Weight 13.18 KG
Shipping Weight 14.55 KG
Shipping Height 290.00 mm
Shipping Width 270.00 mm
**The time to recharge to 90% of full battery capacity following a discharge to shutdown using a load rated for 1/2 the full
load rating of the UPS.
Shipping Depth 500.00 mm
Color Black
Units per Pallet 40.00
Environmental
Operating Environment 0 - 40 C
Operating Relative Humidity 0%
Operating Elevation 0-3000 meters
Storage Temperature -15 - 45 C
Storage Relative Humidity 0%
Storage Elevation 0-15000 meters
Audible noise at 1 meter from
surface of unit
55.00 dBA
Online Thermal Dissipation 90.00 BTU/hr
Conformance
Regulatory Approvals C-tick,CE,EN 50091-1,EN 50091-2,EN 55022 Class A,GOST,IEC 60950,VDE
Standard Warranty 2 years repair or replace
ROHS/WEEE Compliance RoHS 7b Exemption
