Triple Array Panel
Frequency Range
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
Y1
Y2
Y3
1710 2690 1710 2690 1710 2690
set by
65
65
65
2 14
2 14
2 14
Preliminary Issue
Product Candidate
XXXPol Panel 17102690/17102690/17102690 65/65/65 18/18/18dBi 214/214/214T
80010727
Type No.
Frequency range
Polarization
Gain at 0 tilt
Horizontal Pattern:
Half-power beam width
Front-to-back ratio (18030)
Cross polar ratio
0
Sector
60
Tracking, Avg.
Vertical Pattern:
Half-power beam width
Electrical tilt
Sidelobe suppression
for first sidelobe above main beam
within 0 20 sector above horizion
1710 1990 MHz
+45, 45
6 x 17.5 dBi
65
> 25 dB
Typically: 23 dB
> 10 dB
1.5 dB
7.1
2 ... 8 ... 14 T
18 ... 18 ... 18 dB
Impedance
VSWR
Isolation, between ports
Intermodulation IM3
Max. power per input
Total power
1710 2690
1920 2200 MHz
2200 2490 MHz
+45, 45
+45, 45
6 x 18.0 dBi
6 x 18.3 dBi
62
> 25 dB
Typically: 25 dB
> 10 dB
1.5 dB
2490 2690 MHz
+45, 45
6 x 18.6 dBi
60
> 25 dB
Typically: 25 dB
> 10 dB
1.5 dB
57
> 25 dB
Typically: 25 dB
> 10 dB
1.5 dB
6.5
5.9
2 14, continuously adjustable
2 ... 8 ... 14 T
18 ... 18 ... 18 dB
5.2
2 ... 8 ... 14 T
18 ... 17 ... 17 dB
2 ... 8 ... 14 T
18 ... 18 ... 16 dB
50
< 1.5
> 30 dB
< 150 dBc (2 x 43 dBm carrier)
300 W (at 50 C ambient temperature)
1000 W (at 50 C ambient temperature)
1710 1990 MHz: +45/45 Polarization
125
65
7.1
10
Horizontal Pattern
Y1
dB
dB
10
Vertical Pattern
2 14 electrical downtilt
1920 2200 MHz: +45/45 Polarization
120
62
dB
Horizontal Pattern
dB
10
10
Vertical Pattern
2 14 electrical downtilt
2490 2690 MHz: +45/45 Polarization
936.A2840/d
110
57
5.2
3
0
Horizontal Pattern
www.kathrein.de
3
0
dB
10
10
dB
Subject to alteration.
6.5
Vertical Pattern
2 14 electrical downtilt
Y2
Y3
Correlation Tabelle
Frequency Range
Array
Correlation
1710 2690 MHz
1710 2690 MHz
1710 2690 MHz
Y1
Y2
Y3
12
34
56
Mechanical specifications
Input
Connector position
Adjustment
mechanism
Wind load (approx.)
Max. wind velocity
Height/width/depth
Category of
mounting hardware
Weight
Packing size
Scope of supply
6 x 7-16 female
Bottom
FlexRET
Frontal:
Lateral:
Rearside:
N (at 150 km/h)
N (at 150 km/h)
N (at 150 km/h)
200 km/h
Approx. 1475 / 355 / 83 mm
M (Medium)
Approx. 20 kg / 22 kg (clamps incl.)
Approx. 2000 x 549 x 120 mm
Panel and 2 units of clamps
for 42 115 mm diameter
80010727 Page 1 of 2
KATHREIN-Werke KG Anton-Kathrein-Strae 1-3 P.O. Box 10 04 44 83004 ROSENHEIM GERMANY Phone +49 8031 184-0 Fax +49 8031 184-820
Accessories
General Information
Preliminary Issue
Accessories (order separately if required)
Type No.
Description
Remarks
Weight
approx.
Units per antenna
85010002
85010003
85010008
1 clamp
1 clamp
1 downtilt kit
Mast: 110 220 mm diameter
Mast: 210 380 mm diameter
Downtilt angle: 0 8
2.7 kg
4.8 kg
6.5 kg
2
2
1
1.1 kg
2
1
64
9
Accessories (included in the scope of supply)
738546
86010153
1 clamp
FlexRET
Mast: 42 115 mm diameter
Grounding:
The metal parts of the antenna including the mounting kit and the inner
conductors are DC grounded.
1499
Reflector screen: Aluminum.
Fiberglass radome: The grey fiberglass radomes of these antennas
are very stable and extraordinarily stiff. They are resistant to ultraviolet
radiation and can also be painted to match their surroundings.
All screws and nuts: Stainless steel.
1607
Material:
1475
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Environmental conditions: Kathrein cellular antennas are designed to operate under the environmental conditions as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the following items:
Low temperature: 55 C
High temperature (dry): +60 C
Ice protection: Due to the very sturdy antenna construction and the
protection of the radiating system by the radome, the antenna remains
operational even under icy conditions.
Environmental tests:
Kathrein antennas fulfil the stated specifications after completion of the
environmental tests as defined in ETS 300 019-2-4. The homogenous
design of Kathreins antenna families uses identical modules and materials.
Extensive tests have been performed on typical samples and modules.
Layout of interface:
As a result of more stringent legal regulations and judgements regarding product liability, we are
obliged to point out certain risks that may arise when products are used under extraordinary operating
conditions.
The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4 and thereby
respects the static mechanical load imposed on an antenna by wind at maximum velocity. Wind loads are
calculated according to DIN 1055-4. Extraordinary operating conditions, such as heavy icing or exceptional
dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or
even cause it to fall to the ground. These facts must be considered during the site planning process.
The installation team must be properly qualified and also be familiar with the relevant national safety
regulations.
The details given in our data sheets have to be followed carefully when installing the antennas and
accessories.
The limits for the coupling torque of RF-connectors, recommended by the connector manufacturers must
be obeyed.
Any previous datasheet issues have now become invalid.
Page 2 of 2 80010727
www.kathrein.de
KATHREIN-Werke KG Anton-Kathrein-Strae 1-3 P.O. Box 10 04 44 83004 ROSENHEIM GERMANY Phone +49 8031 184-0 Fax +49 8031 184-820
936.A2840/d
Please note:
Subject to alteration.
Bottom view
