WIRE RODS
ABOUT JINDAL STEEL AND POWER LIMITED
Jindal Steel and Power Limited (JSPL) is one of Indias primary & integrated steel producers with a signicant presence in
sectors like Mining, Power Generation and Infrastructure.
With an annual turnover of over US$ 3.6 billion, JSPL is a part of the about US$ 18 billion diversied O. P. Jindal Group and is
consistently tapping new opportunities by increasing production capacity, diversifying investments, and leveraging its core
capabilities to venture into new businesses. The company has committed investments exceeding US$ 30 billion in the future
and has several business initiatives running simultaneously across continents.
From the widest at products to a whole range of long products, JSPL today sports a product portfolio that caters to varied
needs in the steel market. The company also has the distinction of producing the worlds longest 121 metre rails and
introducing large size parallel ange beams in India.
JSPL operates the largest coal-based sponge iron plant in the world and has an installed capacity of 3 MTPA of crude steel at
Raigarh, Chhattisgarh.
The company has an installed capacity of
- 0.75 MTPA Rail and Universal Beam Mill at Raigarh, Chhattisgarh
- 0.6 MTPA Medium a nd Light Structural Mill and 1.0M TPA Plate Mill at Raigarh, Chhattisgarh and
MORGAN WIRE ROD MILL
Located at Patratu, Jharkhand, the mill has production capacity of 0.6 MTPA
of wire rods, and is amongst the top wire rod producers in the country.
Designed and supplied by the world renowned Morgan Construction
Company of USA, JSPL wire rod mill is equipped with the latest technologies
for producing high quality wire rods.
The Mill is specially developed to roll wire rods at a maximum speed of 110
metres-per-second. The wire rods comply with domestic and international
standards and specic customer needs.
The reheating furnace has been designed by Fives Stein, France a globally
reputed name in the industry. The Mill is designed to address dierent post
rolling treatment regimes, (accelerated cooling with STELMOR technology,
retarded cooling and slow cooling) required for the entire range of wire rods.
- 1.5 MTPA Plate Mill producing up to 5 meter wide plates at Angul, Odisha
- 0.6 MTPA Wire Rod Mill and 1.0 MTPA TMT Rebar Mill at Patratu, Jharkhand
The company aims for a fast-paced growth so as to contribute substantially to India's long term prosperity.
An enterprising spirit and the ability to discern future trends have been the driving force behind the companys remarkable
growth story. The company has scaled new heights with the combined force of innovation, adaptation of new technologies
and the collective skills of its 15,000 strong, committed workforce.
JSPL wire rods have close dimensional tolerance, ovality and good surface
nish for improved die life during drawing and an enhanced surface nish of
drawn wires. With superior maintenance practices for all critical equipments
and testing devices, quality performance of products is assured.
JSPL endeavors to strengthen Indias industrial base by aiding infrastructural development, through sustainable development
approaches and inclusive growth. The company deploys its resources to improve infrastructure, education, health, water,
sanitation, environment etc. in the areas it operates in. The company has won several awards for its innovative business
practices.
As JSPL contributes to Indias growth, it has also set in place a global expansion plan in order to become one of the most
prestigious and dynamic business groups of the country. The future is studded with challenges and JSPL is taking them on
with vigor and courage.
1
MORGAN WIRE ROD MILL - EQUIPMENT AND FEATURES
MORGAN WIRE ROD MILL - EQUIPMENT AND FEATURES
30 rolling stand mill facilitates large reduction ratios and produces wire rods with diameters from 5.2mm to 22mm.
Digitally controlled reheating furnace ensures optimized heating arrangement which promotes uniform mechanical
properties in the wire rods and enables very low scale formation.
Alternate horizontal & vertical rolling stands for controlled rod movement during rolling prevents detrimental surface
defects like rolling
laps and stickers in the nal product. Final product conrms to close dimensional tolerances due to less stress generation
during rolling.
Breakdown mill before the continuous rolling stands improves product quality as increased number of passes minimizes
segregation, porosity and inclusions.
Insulated roller table minimizes temperature loss of billets during rolling thus producing homogenous sections.
Hard and wear resistant tungsten carbide rings in the rolls of nishing and pre-nishing blocks and twist free rolling
technology ensure excellent surface nish and narrow dimensional tolerances.
No Twist Mill (NTM), designed for controlled temperature rolling to produce superior grain structure and more uniform
ovality, ensures high dimensional accuracy at high speeds.
Reducing and Sizing Mill (RSM) ensures high dimensional accuracy in smaller size wire rods.
High speed stands of NTM & RSM are equipped with entry guides which eleminates scratching on the rod surface by
accurately directing oval sections into round passes.
Post rolling controlled cooling through water boxes and variable speed conveyor is done to attain superior micro structure
for consistent mechanical properties. Thermomechanical cooling process produces high precision wire rods with a ne grain
structure which eliminates the requirement for further heat treatment, while the cooling process ensures minimal surface
scale generation.
MORGAN WIRE ROD MILL - EQUIPMENT AND FEATURES
Crop Shears at various points in the line to remove front and tail ends, ensure
that the split ends of the billets do not propagate and aect the quality of the
wire rod.
On-line rod gauges installed at various points enable active monitoring and
control of the sectional dimensions for a close dimensional tolerance range.
Morgan enhanced water cooling system encourages uniform cooling of the rods
enabling uniform mechanical properties.
High speed laying head with tail end control and equipped with ring distributor
in the coil collection system improves coil shape, to ensure smooth pay-o during
wire drawing stage.
Stelmor conveyor promotes uniformity of coil cooling with use of Optimesh or
Optiex system, leading to superior metallurgical and mechanical product
properties for all steel grades.
Reform tub used for stacking up the coils delivers up to 20% shorter and denser
coil stacks thus reducing handling and storage costs.
Automatic compacting system is used for compaction and tying of coils at four
locations after inspection and sampling. The unique compactor design guarantees
equal press-force distribution throughout the coil.
Electronic weighing machines for accurate weighing of coils with special bar
coding to ensure the complete traceability and dispatch of coils to the designated
customers.
ADVANTAGES OF NO TWIST MILL (NTM)
PROCESS FLOW
Increases productivity allows to roll at rates up to 150 tons/hr
Iron and Steel Making
Designed for controlled temperature rolling to produce superior
grain structure and more uniform scale
More dimensional accuracy
Rapid commissioning and start-up
Easily integrates with present or future process control systems
Lowers maintenance costs
Reduces roll change time
ADVANTAGES OF REDUCING & SIZING MILL (RSM)
Higher productivity Productivity on smaller sizes can be increased up to 60%
Single family rolling A single pass design from stand 1 to the last stand of the nishing block
Expanded size range Product size range from 5.2 mm to 22 mm
Patented roll pass design Unique (Oval-Round-Oval-Round) pass sequence, for close tolerance of roundness
Precision tolerances All sizes can be produced to ultra precision tolerances
Thermo-Mechanical Rolling Water cooling and equalization zones provide proper rolling condition leading to ne grain
structure without annealing processes
Reduced inventory Reductions in the rolling cycle are achieved while maintaining a high level of mill utilization
By-Pass troughs Patented built-in feature provides immediate set-up for dummying trough
Compact drive Patented combination drive unit provides compact footprint for tight installation conditions
Guideless rolling Guideless rolling for quick and ecient roll parting
JSPL has its own steel making unit producing steel through the
EAF-LRF-VD-CCM route with fully automated control system backed by
computerized level II process models. These models ensure that steel is
always produced within consistent composition band. Steelmaking at JSPL
is supported by two Blast Furnaces with 1.60 million tonnes per annum of
hot metal capacity and DRI (Sponge Iron) plant of 1.37 million tonnes per
annum capacity.
JSPLs steel melting facility is equipped with three Electric Arc Furnaces (EAF) of 100 tonnes capacity each. Equipped with
Supersonic Lance and Carbjet facilities, the furnaces have eccentric bottom tapping feature which ensures slag free tapping of
steel. Owing to usage of metallics based on virgin iron ore from captive mines and only plant return scrap (no outside scrap),
very low level of inclusion and tramp elements are achieved, thus generating high quality clean steel. Steelmaking facilities
have 4x100 MT Ladle Rening Furnaces (LRF), used for carrying out the steel rening operations including desulphurisation.
Ferro-alloys are added to meet the chemistry as per requirement and Argon gas is rinsed through the steel bath to
homogenise the composition and temperature. The furnaces are capable of making wide ranging grades of alloy steel in
superior quality as per customers requirements. For special and alloy grade steels, Vacuum Degasser (VD) capable of
producing vacuum level of less than 1 mbar for achieving very low levels of hydrogen and oxygen is used, thus, eectively
degassing the steel before casting.
Continuously cast square billets of 165mm size are used for wire rod rolling, which are cast in a six strand billet caster.
The caster is equipped with Electromagnetic Stirring (EMS) facility which minimises centre line segregation and thus ensures
uniform properties in wire rods as well as in the nished wires.
Rolling
Further billets are rolled at 0.6 MTPA Morgan Wire Rod mill. This mill is
equipped with advanced rolling equipments to meet the processing
requirements of various grades of Carbon and Alloy steel. The latest
technology that comes with Morgan mill assures high degree of thermo
mechanical properties along with dimensional accuracy of highest precision,
providing consistency of properties within a coil and from coil to coil.Wire
Rod mill at Patratu produces Low carbon, Medium carbon, High carbon and
other special grades that include Cold Heading Quality (CHQ), electrode
quality, high carbon wire rods for spring steel, spoke wire, pre-stressed
concrete, tyre bead & ACSR, etc.
PROCESS FLOW
WHY JSPL WIRE RODS ?
JSPL wire rods have become a product of choice among wire drawers across the country due to the aforesaid
advantages. We continue to improve and innovate to produce the best of quality, and develop systems that can
deliver our products at your doorstep in excellent condition.
JSPL Wire Rods comes with a promise of:
High quality and dimensional precision
Latest technology comes with Morgan Wire Rod Mill assurring high degree of thermo-mechanical properties
along with unparalleled dimensional accuracy
New age Reducing & Sizing Mill (RSM) ensuring excellent product tolerance and ovality. This in conjunction with
the Morgan Enhanced Temperature Control System (METCS), provides consistency in mechanical properties within
a coil and from a coil to another coil
Coil reforming technology ensuring coils are shipped with adequate care and reaches the customer with excellent
coil stability without any damage
Highly automated production facility and cotinuous checks at every level to produce the best quality wire rods
Quality assurance system, equipped with modern equipments and best of the skilled force constantly strive to get
the best of products by controlling the entire process at every vital point.
Commitment towards complete customer satisfaction with respect to quality, delivery and technical services, and
the belief that regular feedback from our widespread network of customers' is the only way for getting valuable
insights for continuous improvement of our products and services
Special Features Of JSPL Wire Rods
Product Category
PRODUCT RANGE
* Very low content of tramp elements
* Low N2 content
* Smooth drawing at highdrawing speed
* Very good surface quality
Medium and High Carbon
Wire Rods
* Very low content of tramp elements
* Low N2 content
* Consistent microstructure from
undesirable hard phases (Free from
harmful internal segregation)
* Tensile property variation within a ring
restricted to 3 kg/mm2, which is at par
with international norms
* High reduction in area (%RA) of wire
rods
* Suitable for both pickling as well as
mechanical de-scaling practices
* Smooth drawing at high drawing
speeds
* Consistent porperty of the drawn wire
* Ease of scale removal by mechanical
descaling
* Customised grades suited to varied
end application needs
* Very good surface quality
Low Carbon Wire Rods for
Stick Electrodes
* Very low content of tramp elements
* Low tensile strengths with high
reduction in area
* Low N2 content
* Superior property of weldment
* Superior drawability even at high
speeds
* Certied by BIS
Wire Rods for Continuous
Electrodes
* Wire rod surface free from harmful
defects
* Low content of sulphur and phosphorus.
* High degree of cleanliness
* Control of chemical composition
within a very close Band (Low Decrab
Level)
* Consistent level of tensile strength
and reduction in area in the wire rods.
* Very good surface quality
* Very low content of tramp elements
* Low N2, H2, O2 content
* Wire rod surface free from harmful
defects
* Low content of sulphur and phosphorus.
* Control of chemical composition
within a very close band
* Uniform austenitic grain size
* Very good content of tramp elements
* Low Decrab Level
* To enhance better response to heat
teratment for uniform mechanical
properties
* Very good surface quality
* Very good upsetability
* Very low content of tramp elements
* Low N2, H2, O2 content
* Wire rod surface free from harmful
defects
* Low content of sulphur and phosphorus.
* Control of chemical composition
within a very close band
* Uniform austenitic grain size
* Very good content of tramp elements
* Low Decrab Level
* Very good cleanliness
* To enhance better response to heat
teratment for uniform mechanical
properties
* Very good surface quality
* Very good forgeability
* Very good Impact Toughness
0.6 MTPA
Input Feedstock
Size Range
5.2 mm, 5.5 22.0mm(in 0.5mm increments)
Coil Weight
2,480 kg (nominal)
Coil Outside Diameter
1250 mm
Coil Inside Diameter
850 mm
Rolling Mill Strand:
Reheating Furnace:
Benets to Customer
Low Carbon and Mild Steel
Wire Rods
Key Mill Features
Annual Production Capacity
Special Features
Strand
30
Type
Vertical and Horrizontal and blocks
Pass
Tungusten Carbide Ring from Std- 15 to 30
Line Speed
110 M/Sec.
Capacity(T/hr)
160
Type
Walking Beam
Cold Heading Quality Wire
Rods
Stelmor conveyor with cover (Hood) & Blower
Cooling Equipments
Supply Conditions
Supply Condition
As per Mutually agreed TDC (Technical Delivery Conditions)
Dimensional Tolerance
Sizes (mm)
Tolerance (mm)
Maximum Ovality (mm)
5.2 8.5
0.20
0.30
9.0 14.0
0.25
0.40
14.5 22.0
0.30
0.50
Alloy Steel Wire Rods
PRODUCT SPECIFICATION
High Carbon Steel Wire Rods for cold drawing applications
Grade
Dimension
Dimension
Scope
(mm)
SAE1006/
CAQ
5.2 - 22
Chemical Composition
%C
%Mn
0.04 - 0.08 0.30 - 0.60
%Si
0.10 - Max
%P
%S
UTS
%RA
(Mpa)
Max
Min
0.025 - Max 0.015 - Max 290 - 375
70
Applications
Cable armour wire,
drawing, construction
SWR10
(SAE1008)
52 - 22
0.10 - Max
030 - 0.60
0.10 - Max
0.025 - Max 0.015 - Max 300 - 430
70
Steel Decoration product,
Binding wires, nails, U
bolt, J Bolt etc.
SWR14
(SAE1010)
5.2 - 22
0.08 - 0.13 0.03 - 0.60
0.10 - 0.30
0.025 - Max 0.015 - Max 320 - 450
70
Wire conductor in
transport & telegraphy
holding & binding wires
SAE1020/
1018
5.2 - 22
0.16 - 0.20 0.60 - 0.90
0.10 - Max
0.025 - Max 0.015 - Max 490 - Max
40
SAE1020
5.2 - 22
0.18 - 0.23 0.30 - 0.60
0.10 -Max
0.025 - Max 0.015 - Max 420 - 530
60
SAE1025
C18MMn
5.2 - 22
5.2 - 22
0.22 - 0.28 0.30 - 0.60
0.17 - 0.21 0.75 - 0.85
0.15 - 0.35
0.15 - 0.30
0.025 - Max 0.025 - Max 400 - 520
0.03 - Max
0.03 - Max
460 - 560
50
55
Fencing wire, binding wire,
net, nail, small shaped
product, wire net, screw,
rivet, spoke, mesh etc.
Machine parts like nut,
bolt, fasteners by hot &
cold forging
Nails
%Si
%P
%S
UTS
%RA
(Mpa)
Max
Min
%C
%Mn
C80
5.2 - 16
0.80 - 0.85
0.60 - 0.90
0.15 - 0.25 0.025 - Max 0.020 - Max 1175 - 1275
30
wires for concrete
reinforcement, springs
HC 36/40
5.2 - 22
0.36 - 0.40
0.50 - 0.60
0.10 - Max 0.025 - Max 0.020 - Max
628 - 706
40
Earth and stay wires
HC 41/45
5.2 - 13
0.41 - 0.45
0.60 - 0.90
0.15 - 0.25 0.025 - Max 0.020 - Max
695 - 785
40
Umbrella ribs, cycle
spokes
HC 51/55
5.2 - 13
0.51 - 0.55
0.60 - 0.90
0.15 - 0.30 0.025 - Max 0.020 - Max
814 - 903
40
HC 56/60
5.2 - 13
0.56 - 0.60
0.60 - 0.80
0.15 - 0.25 0.025 - Max 0.020 - Max
853 - 942
40
HC 61/65
5.2 - 13
0.61 - 0.65
0.60 - 0.80
0.15 - 0.25 0.025 - Max 0.020 - Max 922 - 1010
40
HC 66/70
5.2 - 13
0.66 - 0.70
0.60 - 0.90
0.15 - 0.25 0.025 - Max 0.020 - Max 991 - 1069
40
HC 71/75
5.2 - 13
0.71 - 075
0.60 - 0.90
0.15 - 0.25 0.025 - Max 0.020 - Max 1040 - 1128
36
HC76/80
5.2 - 13
0.76 - 0.80
0.60 - 0.90
0.15 - 0.25 0.025 - Max 0.020 - Max 1099 - 1177
35
HC81/85
5.2 - 13
0.81 - 0.85
0.60 - 0.90
0.15 - 0.25 0.025 - Max 0.020 - Max 1138 - 1236
30
Medium Carbon Steel Wirerods - for general engineering applications
Grade
Dimension
Chemical Composition
Scope
(mm)
%C
%Mn
SAE1030
5.2 - 22
0.28 - 0.34
0.60 - 0.90
SAE1038
5.2 - 22
0.35 - 0.42
0.60 - 0.90
SAE1040
5.2 - 22
0.37 - 0.44
0.60 - 0.90
%Si
%P
UTS
%S
%RA
Applications
Applications
Scope
(mm)
Low Carbon Steel Wire Rods for general engineering applications
Grade
Chemical Composition
Grade II spring used in
machines tools, forming
machines, hydraulic
machines etc.
Wires for rope and other
noncritical and misc. wire
application
Grade II spring used in
machines tools, forming
machines, hydraulic
machines etc.
Wires for tyre bead and
spring application
Rope, binding & holding
automoblie tire, conveyor
wires, tire cord to
reinforced belt, pressure
hoses, chisel etc.
Reinforcement for railway
sleepers, bridges
Reinforcement for railway
sleepers, bridges, needle
wire etc.
Rope, binding & holding
wires, tire cord to
(Mpa)
Max
Min
0.15 - 0.25 0.025 - Max 0.015 - Max
450 - 500
50
Fasteners, rivets etc.
PSC116
5.2 - 13
0.77 - 0.82
0.60 - 0.90
0.15 - 0.25 0.025 - Max 0.020 -Max 1138 - 1236
36
0.15 - 0.25 0.025 - Max 0.015 - Max
460 - 500
55
Nuts, bolt, axle,
connecting rod etc.
reinforced automobile
tire, conveyor belt,
pressure hoses, chisel etc.
TB68
5.2 - 13
0.66 - 0.70
0.60 - 0.90
0.15 - 0.25 0.025 - Max 0.020 - Max 965 - 1030
40
Wires for tyre bead and
spring application
0.15 - 0.25 0.025 - Max 0.025 - Max
550 - 680
50
Chain for Cranes to lift
weight, binding, suspension ropws, wire for lifts
mine cages, cable ways
SAE1541
5.2 - 22
0.36 - 0.44
0.60 - 0.90
0.10 - 0.30 0.025 - Max 0.015 - Max
706 - Max
50
EN8D
5.2 - 22
0.40 - 0.45
0.70 - 0.90
0.15 - 0.25 0.025 - Max 0.015 - Max
706 - Max
50
Nut, bolt, fasteners for
automobile and bridge
industries
EN8A
5.2 - 22
0.33 - 0.38
0.70 - 0.90
0.15 - 0.25 0.025 - Max 0.015 - Max
687 - Max
45
High tensile fasteners
10
High Carbon Steel Wire Rods for spring applications
Grade
Dimension
Scope
(mm)
Chemical Composition
%C
%Mn
%Si
%P
%S
UTS
%RA
(Mpa)
Max
Min
SWRH 52-A
5.2 - 13
0.51 - 0.55 0.30 - 0.60
0.15 - 0.25
0.025 - Max 0.030 - Max
765 - 853
40
SWRH 62-A
5.2 - 13
0.60 - 0.65 0.30 - 0.60
0.15 - 0.25
0.03 - Max
893 - 981
40
SWRH72A
5.5 - 10
0.69 - 0.72 0.30 - 0.60
0.15 - 0.25
0.025 - Max 0.020 - Max 940 - 10.40 40
11
0.030 - Max
Applications
Wires for spring
application
Grade II spring used in
machines tools, forming
machines, hydraulic
machines etc.
Spring Application
Wire Rods for Ball Bearings
High Carbon Steel Wire Rods for spring applications
Grade
Dimension
Chemical Composition
%Si
%P
%S
%RA
(Mpa)
Max
Applications
Scope
(mm)
%C
SWRH 82-A
5.2 - 13
0.80 - 0.85
0.30 - 0.60 0.15 - 0.25
SWRH82B
5.5 - 15
0.81 - 0.84
0.60 - 0.90 0.15 - 0.25 0.020 - Max. 0.025 - Max. 1285 - Max.
30
Wires for spring application
Pre-stresses concrete and
Spring Application
SRWH 82-V
5.2 - 15
0.81 - 0.86
0.60 - 0.90 0.15 - 0.25 0.025 - Max. 0.020 - Max. 1175 - 1275
30
Spring Application
SWRH 82BCr
5.2 - 15
0.81 - 0.85
0.60 - 0.90 0.15 - 0.25 0.020 - Max. 0.020 - Max. 1160 -1246
30
SWRH 82B-
5.2 - 15
0.81 - 0.85
0.60 - 0.90 0.15 - 0.25 0.025 -Max. 0.020 - Max 1187 - 1285
30
Boron
%Mn
UTS
0.03 - Max. 0.030 - Max. 1090 - 1160
Wires for spring application
Dimension
Chemical Composition
UTS
%RA
%C
%Mn
%Si
%P
%S
(Mpa)
Max
Min
EN18P
5.2 - 22
0.38 - 0.44
0.65 - 0.90
0.15 - 0.25
0.15 - 0.25
0.015 - Max
756 - Max
50
42CrMo4
5.2 - 22
0.38 - 0.45
0.60 - 0.90
0.15 - 0.25
0.15 - 0.25
0.015 - Max
500 - 600
50
16MnCr5
5.2 - 22
0.14 - 0.19
1.00 - 1.30
0.15 - 0.35 0.025 - Max 0.015 - Max
500 - 600
50
20MnCr5
5.2 - 22
0.17 - 0.22
1.10 - 1.40
0.15 - 0.25 0.020 - Max 0.030 - Max
550 - 650
50
SCM 415H
5.2 - 22
0.13 - 0.18
0.60 - 0.90
0.15 - 0.25 0.025 - Max 0.025 - Max
500 - 600
50 Case hardening of
automobile & machines
SCM 420H
5.2 - 22
0.18 - 0.23
0.60 - 0.85
0.15 - 0.25 0.025 - Max 0.030 - Max
570 - Max
50 parts like connecting rod
500 -600
Case hardening of
50 automobile and machines
parts like gear
SAE8620
5.2 -22
0.18 - 0.23
0.70 -0.90
0.15 -0.30 0.025 - Max
0.030 -Max
Forging
SAE4135
5.2 - 22
0.33 - 0.38
0.70 - 0.90
0.15 - 0.30
0.03 - Max
0.030 - Max
932 - 1080
50
SAE4140
5.2 - 22
0.38 - 0.43
0.75 -1.00
0.15 - 0.30
0.03 - Max
0.030 - Max
932 - 1030
40 For high tensile fasteners
SCM 435
5.2 - 22
0.33 - 0.38
0.60 - 0.90
0.15 - 0.25 0.025 - Max 0.015 - Max
932 - 1080
50
Electrode Steel Wire Rods for welding applications
Grade
Dimension
Chemical Composition
Scope
(mm)
%C
%Mn
EWNR
5.2 - 9
0.10 - Max
0.38 - 0.62
EH10K
5.2 - 9
0.09 - 0.14
ER70SG
5.2 - 9
EA2
%Si
%P
UTS
%RA
Applications
%Si
%P
UTS
%S
(Mpa)
Max
%RA
En31
5.2 - 22
0.95 - 1.05
0.35 - 0.45
0.20 - 0.02 0.020 - Max 0.015 - Max 1079 - 1177
25
For roller and ball
bearing applications
SAE52100
5.2 - 22
0.98 - 1.10
0.25 - 0.45
0.15 - 0.30 0.020 - Max
25
Bearings
0.015 -Max 1079 - 1177
Min
Free Cutting Steel Wire Rods for machining applications
Dimension
Chemical Composition
UTS
%RA
Scope
(mm)
%C
%Mn
%Si
%P
%S
(Mpa)
Max
Min
SAE 12L14
5.2 - 22
0.07 - 0.15
0.85 - 1.20
0.05 - Max
0.06 - Max
0.20 - 0.30
350 - 450
60
EN 1A
5.2 -22
0.07 - 0.15
0.80 - 1.20
0.05 - Max
0.06 - Max
0.20 - 0.30
350 - 450
60
EN 8M
5.2 - 22
0.35 - 0.45
1.00 - 1.30
0.25 - Max
0.06 - Max
0.12 - 0.20
569 - Max
50
EN 15AM
5.2 - 22
0.30 - 0.40
1.30 - 1.70
0.25 - Max
0.05 - Max
0.12 - 0.20
600 - 750
30
Grade
Dimension
Chemical Composition
Scope
(mm)
%C
%Mn
SAE1006
5.2 - 22
0.04 - 0.08
0.25 - 040
SAE1008
5.2 - 22
SAE1010
%Si
%P
UTS
%S
%RA
290 - 400
50
0.10 - Max 0.30 - 0.60
0.10 - Max 0.025 - Max 0.020 - Max
300 - 420
50
5.2 - 22
0.08 - 0.13 0.30 - 0.60
0.10 - Max 0.025 - Max 0.020 - Max
320 - 430
50
SAE1012
5.2 - 22
0.10 - 0.15 0.30 - 0.60
0.10 - Max 0.025 - Max 0.020 - Max
330 - 440
50
SAE1015
5.2 - 22
0.13 - 0.18 0.30 - 0.60
0.10 - Max 0.025 - Max 0.020 - Max
340 - 450
50
Socket, Connecting Rod,
SAE1018
5.2 - 22
0.15 - 0.20 0.60 - 0.90
0.10 - Max 0.025 - Max 0.020 - Max 400 - 500
50
Rivets, etc.
SAE1020
5.2 - 22
0.18 - 0.23 0.60 - 0.90
0.10 - Max 0.025 - Max
0.020 -Max
420 - 530
45
SAE10B21
5.2 - 22
0.18 - 0.23 0.80 - 1.10
0.10 - Max 0.025 - Max 0.020 - Max
445 - 570
SAE15B25
5.2 - 22
0.23 - 0.28 0.90 - 1.20
0.10 - 0.20 0.025 - Max 0.025 - Max
495 - 615
SAE19MnB4
5.2 - 22
0.20 - 0.25 0.80 - 1.10
0.10 - 0.30 0.025 - Max
0.02 - Max
495 - 620
0.015 - Max
420 - Max
70
1.40 - 1.65
0.07 - 0.23 0.015 - Max
0.07 - 0.23
530 - 650
70
0.07 - Max
0.90 - 140
0.40 - 0.70 0.0.20 - Max 0.020 - Max
480 - Min
50
5.2 - 9
0.05 - 0.16
1.00 - 1.30
0.020 - Max 0.020 - Max
490 - 680
50
SAE10B35
8 - 22
0.32 - 0.38 0.80 - 0.10
0.15 - 0.25
0.02 - Max
0.015 - Max 608 - Max
50
JSPL weld
(MIG)
5.2 - 9
0.062 - 0.16 1.42 - 1.80
0.015 - Max
525 - Max
80
SAE10B38
8 - 22
0.35 - 0.45 0.60 - 0.90
0.15 - 0.25
0.02 - Max
0.015 - Max 568 - Max
50
JSPL Weld
(M) Mod
5.2 - 9
Co2 Welding Electrode
0.88 - 0.95
0.015 - Max
12
525 - Max
Applications
0.08 - Max 0.025 - Max 0.020 - Max
0.03 - Max 0.02 - Max
1.87 - 1.95
fateners, hydraulic
hose end ttings, etc.
Min
Min
0.06 - 0.08
Machined parts like
engine shaft, connecting
rod, spindles, gears,
(Mpa)
Max
(Mpa)
Max
0.80 - 1.15
Applications
Cold Heading Quality Grade Wire Rods for general engineering applications
%S
Welding electrode
Applications
%Mn
Wires for spring appliction
Scope
(mm)
Chemical Composition
%C
Grade
Applications
Dimension
Scope
(mm)
Min
Alloy Steel Wire Rods for heat treating applications
Grade
Grade
80
13
Automobile and Machines
Parts, like screw,
Fasteners, Bush, Spline,
Shaft, Gear, Quarter, Nails,
High Tensile Fasteners
QUALITY ASSURANCE PROCESSES
APPLICATIONS
The quality department of Wire Rod Mill at JSPL Patratu is focused and
dedicated to achieving the rigeorous zero defects and zero failures standard.
JSPL Wire Rods due to its aforesaid advantages is prominently being
used in various applications like:
An integral part of the steelmaking and rolling complex, the metallurgical
laboratory, i.e. Central Lab is fully equipped to test variations in steel
structure from centre to surface, distribution and size of non-metallic
inclusions and the nature and depth of surface imperfections.
General purpose Wires, Industrial wires, Agriculture Wires, Bush
Wires, Chain Rivet Wires, Detonator Wire, Umbrella Ribs,
Upholstery Wires, Cycle Spokes, Heald Wires, Stapler Pin Wires,
Needle Wires, Safety Pin Wires, Card Clothing Wires, Vineyard
Wires, Earth wires etc.
Microstructure of dierent samples is observed to ensure minimal
decarburisation level (1% of the wire rod diameter or as mandated by the
customer), presence of inclusions, and grain size measurement.
JSPLs lab is Equipped with
Optical Microscope
Spectroscope
Micro-Polisher
Jominy Quench Tester and other equipments.
For production of automobile components like Screws, Fasteners,
Bush, Spline, Socket, Connecting Rod, Gear, Engine Shaft,
Connecting Rod, Spindles
Fasteners, Bolts, Rivets, Screws for general applications
Electrode Wires
CAQ, ACSR wires
Tyre and Hose Reinforcement Wires
Two quality labs the Main Central Lab and the Express Lab set at the shop oor, work in tandem with customers
requirement, to continuously ne tune our products- resulting in productivity improvement at the customer end.
Commitment to quality starts right from the raw material. The billets at the billet yard are rst physically inspected to
ensure their dimensional tolerance, surface defect and then spectro tested to ensure their chemical composition. The
spectrometer is fully computerized and can analyze a steel sample for 23 dierent elements in less than 20 seconds. It
provides precision analysis for the full range of steel grades produced in the plant. The facilities present at our online
express lab are tensile testing, hardness testing and upset test for the nished coils ranging from 5.2 mm to 22 mm
diameter. JSPL Conducts Hardenability test for alloy steel grades.
Pre-stressed Concrete Wire
Coil Springs
Wire Ropes
Ball Bearing Balls
PACKING AND DELIVERY
Each wire rod coil is strapped using an automatic compacter with steel straps and is
provided with computer printed tags carrying size/heat no/weight/ production date and
bar coding, allowing it to be traced right from the steel making stage to the nished
product.
JSPL ensures that the wire rods are delivered in prime condition to customers through
rake or by road within the shortest time period. We have a wide distribution network,
carefully nurtured over the last few years, with stockyards at various locations across
India. JSPL can oer our products from plant or stockyards as per convenience of our
customers.
14
15
KEY LOCATIONS & SALES NETWORK
CERTIFICATES
Corporate Oce
Jindal Centre,
12, Bhikaiji Cama Place,
New Delhi-110 066, INDIA
Tel: +91 11 26188340-50
Fax: +91 11 26161271
Registered Oce
O.P. Jindal Marg
Hisar-125 005
Haryana, INDIA
Tel: +91 1662 222471-84
Fax: +91 1662 220476
ISO - 14001 : 2004 Environment
Management System
PGCIL Approval for HTGS Coil Wire
ISO - 9001 : 2008 Quality
Management System
PGCIL Approval for Manufacture
Earthwire
16
OHSAS - 15001 : 2007 Occupational
Health& Safety Management System
PGCIL Approval for Nut & Bolt
Works
Angul
Jindal Steel & Power Ltd.
Chhendipada Road, SH-63,
At/Po: Jindal Nagar, Pin-759111
Distt: Angul (ODISHA)
Tel: +91 6761 254191-95
Fax: +91 6761 254141-144
E-mail: jindalangul@angul.jspl.com
Barbil
Iron Ore Pellet Plant
Commercial Oce, Plot No. 507/365,
Barbil-joda Highway,
Barbil-758035, Odisha, INDIA
Tel: +91 67 67 248621/248625
Fax: +91 6767 248620
Dumka
Indra Palace, Nag Path,
Shiv Pahar, Dumka - 814 101,
Jharkhand, INDIA
Tel: +91 6434 231045,
Fax: +91 6434 231044
Patratu
Balkudra, Patratu,
Distt. Ramgarh,
Jharkhand - 829 143, INDIA
Tel: +91 6553 275724/275726
Fax: +91 6553 275744
Raipur
13 K.M. Stone
G.E. Road, Mandir Hasaud,
Raipur - 492 101, Chhattisgarh, INDIA
Tel: +91 771 2471205-07
Fax: +91 771 2471214, 2471120
E-mail: jspl_raipur@rpr.jspl.com
Raigarh
Kharsia Road, raigarh-496 001,
Chattishgarh, INDIA
Tel: +91 7762 227001-05
Fax: +91 7762 227022-23
E-mail: raigarh@jspl.com
Marketing Oce
Marketing Head Oce,
North Regional Oce
Jindal Steel & Power Limited
Plot No-2, Sector-32, Near Exit-10,
Gurgaon-122 001, Haryana, INDIA
Tel: +91 124 6612000(Board)
Fax: +91 124 6616202
E-mail: marketing@jindalsteel.com
Ahmedabad
Jindal Steel & Power Limited
1208, MATRIX, Behind Divya
Bhaskar Oce, SG Road, Prahladnagar,
satellite, Ahmedabad-380 051
Tel: +91 79 65255502/03
Mob: +91 99980 42422
E-mail: manish.lunker@jspl.com
Bengaluru
Jindal Steel & Power Limited
N-306, IIIrd Floor, Manipal Centre,
47, Dickenson Road, Bengaluru-560 042
Tel: +91 80 42127132
Mob: +91 9980944001
E-mail: vadankumar@jspl.com
Bhopal
Jindal Steel & Power Limited
FM-5A, 1st oor, Black-A,
Mansarover Complex,
Hoshangabad Road, Bhopal-462 011
Tel: +91 755 4061630
E-mail: Deepak.srivastava@jindalsteel.com
Bhubaneswar
Jindal Steel & Power Limited
Flat No. 204/205, Plot No. 428/1869
Basudev Enclave, Near Swaranapuri,
Bhubaneswar-751 029
Tel: +91 674 2726889
Mob: +91 7894407142
E-mail: subhasisbiswas@jspl.com
Chennai
Jindal Steel & Power Limited
A Block, 6B, 6th Floor,
Meena-Kampala Arcade,
Old No. 113 & 114, New No 20 & 18,
Sir Theyagaraya Road,
T. Nagar, Chennai-600 017
Tel: 044 43446956/ 24323530
Fax: +91 44 42132334
Mob: +91 9789092378
Email: ldpani@jspl.com
Chandigarh
Jindal Steel & Power Limited
SCO-24, Sector 26,
Madhya Marg, Chandigarh-160 019
Mob: +91 8427822311
E-mail: anand.prakash@jspl.com
Hyderabad
Jindal Steel & Power Limited
Suite No. 102, 1st Floor
Cyber Heights, Banjara Hills,
Road No. 2, Hyderabad-500 034
Tel: +91 40 400024878
Mob: +91 8897507714
E-mail: suresh.jakkula@jspl.com
Jaipur
Jindal Steel & Power Limited
501 & 504, Pashupati Akshat Heights
Bani Park, Jaipur-302 016
Mob: +91 9694085333
E-mail: siddarth.lodha@jindalsteel.com
Jamshedpur
Jindal Steel & Power Limited
Flat No. A1/1, Niroda Apartment,
L Road, P.O. Bistupur,
Jamshedpur-831 002
Mob: +91 8800690252
E-mail: sunil_sharma@jindalsteel.com
Kanpur
Jindal Steel & Power Limited
Sai Square (3rd oor) 45,
Bhargava Estate, Civil Lines,
Kanpur-208 001
Mob: +91 9935633332
E-mail: rajiv.mishra@jindalsteel.com
Visakhapatnam
Jindal Steel & Power Limited
2nd Floor, pavan Commercial complex,
(Above syndicate Bank) Main Road,
Daba Gardens, Visakhapatnam-530 020
Andhra Pradesh
Tel: +91 891 2524812
Mob: +91 9573563311
E-mail: ys.reddy@jspl.com
Raipur
Jindal Steel & Power Limited
13 K.M. Stone, G.E. Road, Mandir Hasaud
Raipur - 492 101, Chhattisgarh, INDIA
Tel: +91 771 2471205-7
Fax: +91 771 3054671/ 2471001
Email: sbnag@rpr.jspl.com
Kochi
Jindal Steel & Power Limited
32/1577-C2 (2nd Floor) springs Cascade,
Opp. Ernakulam Medical Centre,
Bye Pass Road, Palarivattom,
Kochi-682 025
Tel: +91 484 4019808
Mob: +91 9567761233
E-mail: anurag.rai@jindalsteel.com
Mumbai
Jindal Enclave, 1st oor,
Behind Marathe Udyog Bhawna
New Prabhadevi Road, Prabhadevi
Mumbai-400 025
Tel: +91 22 66241000, 66241031
Fax: +91 22 66241020
Email: subrat.panda@jspl.com
Kolkata
Jindal Steel & Power Limited
Room No. 61 & 63, 6th Floor,
Circular Court, 8 A.J.C. Bose Road,
Kolkata-700 017
Tel: +91 33 40218100-20
Fax: +91 33 40218116
Mob: +91 9163878190
E-mail: kaushikb@jspl.com
Patna
M/s Jindal Steel & Power Ltd
C/o R P Nayak, Rose Bid School Lane
Near A N College Boring Road, Patna
Tel: 08051638051
E-mail: amar.gaunjhu@pat.jspl.com
International Sales Division
Jindal Steel & Power Ltd
Plot No. 2, Sector-32,
Near Exit-10, Gurgaon-122 001
Tel: +91 8860093757
E-mail: shivkumar@jindalsteel.com
International Oces
Oman
Shadeed Iron & Steel LLC
P.O. Box: 312, A Tareef,
321, Sohar, Sultanate of Oman
Tel: +96826850459
E-mail: amit.gupta@jindalsteel.com
Indonesia
PT. Jindal Overseas
Deutsche Bank Building,
Suite 1302, JI. Imam Banjol No. 80,
Jakarta Pusat 10310, Indonesia
Tel: +62 21 39831525-26
E-mail: gaurav.sood@jindalsteel.com/
yvonne@jindalindonesia.com
Dubai
Jindal Steel DMCC
3308-3309, Cluster-X
Jumairah Bay Tower-2 (X2)
Jumairah Lake Towers (JLT)
Dubai, United Arab Emirates
Tel: +971504558565, +971556578192
E-mail: dhiren.patel@jindalsteel.com
Stockyards
Ahmedabad
M/s Raghav Steel
156/157, Mouje Eyava, Near Hipolin Ltd.,
Sanand Viramgam Highway
Sanand, Ahmedabad-382 110, INDIA
Mob: +91 9909964648
E-mail: hardiks@jspl.com
Ghaziabad
M/s Daya Steel Jindal Polyex JV Pvt Ltd
A-3, Udyog kunj, UPSIDC Industrial Area
27 KM Stone, Hapur Bypass, NH 24
Ghaziabad-201 001
Mob: +91 9810939039
E-mail: arun.goyal@jindalsteel.com
M/s Chachan Metals Pvt. Ltd.,
Khasra No. 387-389 & 39-394
Reliance Road, Gram: Bhavapur,
Jindal Nagar, Ghaziabad-201 302
Raipur
M/s Shri Kirshna Logistics
Transport Nagar, Patrapali,
Distt. Raipur Chattisgarh-496 001
Mob: +91 9907185595
E-mail: murari@rpw.jspl.com
Bhopal
M/s Sanjay Shukla
Survey No. 234, 235, Gram Sukhi, Sevania,
Vidisha Road, Bhopal-462 010
Mob: +91 9827478327
E-mail: as.yadav@jspl.com
Nagpur
M/s Rita Steel
253/K-2-16 K.M. Milestone,
Bhandara Road, Mahalgaon
Tehsil Kamptee, Distt. Nagpur
Maharastra-441 202
Mob: + 91 9923824063
E-mail: rshukla@jspl.com
Chandigarh
M/s VTC Transport Pvt Ltd
131 Industrial Area, Phase 1
Chandigarh-160 101
Mob: +91 9779121214
E-mail: gurbinder.singh@jindalsteel.com
Patna
M/s Shri Tejaswi Yadav
March Marchi Road, Patna (Bihar)
Mob: +91 9771424228
E-mail: amar.gaunjhu@pat.jspl.com
Chennai
M/s Sri Balaji Steel Agencies
Plot No. 4, Survey No. 110/2
Kadappakkam Village, Near Manali
New Town, Vichoor Road, Manali
Chennai-600 103
Mob: +91 9840237966
E-mail: srihari@jspl.com
Kanpur
M/s Shree Gopal Industries
873 A, Kalpi Road Gram Umran,
Rania, Kanpur-209 311
Mob: +91 9935633332
E-mail: rajiv.mishra@jindalsteel.com
Cuttack
M/s Baba Lingaraj Enterprises
At Govindpur Chak PO: Baichuna,
Tangi, Cuttack-754 022
Mob: +91 7894056034
E-mail: sk.barik@jspl.com
Rahuri
M/s Continental Carriers of India
Gate No 44, Near Rahuri Railway Station,
Tandulwadi, Post-Rahuri,
Ahmednagar, Maharashtra-413 705,
Mob: +91 9923001951
E-mail: dhiraj.jspl@gmail.com
Ludhiana
M/s Sumer Sons Pvt. Ltd.,
Village Rajgarh, Tehsil Payal,
Near Doraha, Ludhiana-141 421
Mob: +91 8427629955
E-mail: sureshk@jspl.com
Jaipur
M/s Sumer Sons Pvt. Ltd.,
C-11, Jhotwara Industrial Area,
Jaipur-302 012,
Mob: +91 9166910666
E-mail: pawankumar.rana@jindalsteel.com
Kolkata
M/s Balmer Lawrie & Co. Ltd.,
1, Sonapur Road, Near Jainkund
Petrol Pump Kolkata-700 088
Mob: +91 9007148468
E-mail: pk.singh@jspl.com
Rudrapur
Khasra No. 642, On NH 74,
10 Mile Stone, Rudrapur, Kashipur Road,
Near IBP Petrol Pump,
Vill. Dhaulpur, Post, Khanpur,
Udhamsingh Nagar, Uttrakhand
Mob: +91 9557064666
E-mail: sharad.bajpai@jindalsteel.com
Delhi
M/s LMJ Logistics Ltd.
Khsra No. 42/29, Bakoli,
GT Karnal Road, New Delhi-110 009
Mob: +91 9873973209
Email: dharmendra.raj@jindalsteel.com
Faridabad
M/s Sumer sons Pvt. Ltd.
Village Bhakri, Batkal-Pali Road
Faridabad-121 009
Mob: +91 8826556668
E-mail: sanjay.jha@jindalsteel.com
Mumbai
M/s Jyoti Logistics Pvt. Ltd.,
Survey No. 72, NH-4
Old Mumbai-Pune Highway
Khalapur, Distt. Raigad-410 203
Mob: +91 9820811555
E-mail: amitkhona@jspl.com
Vishakapatnam
M/s Maha Maruti Logistics (P) Ltd.,
SYNO. 27/5, Seshadri Nagar,
Chamalapalli Village Vepagunta,
Vishakapatnam-530 047
Mob: +91 8008655007
E-mail: neelakanta.rao@jspl.com
Jindal Steel & Power Limited
Plot No-2, Sector-32, Near Exit-10, Gurgaon 122 001, Haryana, INDIA
Tel: +91 124 6612000 (Board) | Fax: +91 124 6616202
Toll Free Number:- 180030709600
www.jindalsteelpower.com
e-mail: marketing@jindalsteel.com
pag@jindalsteelpower.com
