HARTZELL PROPELLER INC.

One Propeller Place

Piqua, Ohio 45356-2634 U.S.A.
Telephone: 937.778.4200
Fax: 937.778.4391

MANUAL REVISION TRANSMITTAL

Manual 180 (30-61-80)
Propeller Ice Protection System Manual
REVISION 16 dated October 2013

Attached is a copy of Revision 16 to Hartzell Manual 180

Page Control Chart for Revision 16
Remove Insert
Chapter/Page No. Chapter/Page No.
COVER and Inside Cover COVER and Inside Cover
REVISION HIGHLIGHTS REVISION HIGHLIGHTS
pages 1 thru 4 pages 1 thru 4
LIST OF EFFECTIVE PAGES LIST OF EFFECTIVE PAGES
pages 1 thru 6 pages 1 thru 6
ILLUSTRATED PARTS LIST ILLUSTRATED PARTS LIST
pages 10-1 thru 10-4 pages 10-1 thru 10-4
pages 10-7 and 10-8 pages 10-7 and 10-8
pages 10.6-1 thru 10.6-50 pages 10.6-1 thru 10.6-50
TR-006 See NOTE: 1
pages 10.6-51 thru 10.6-86
pages 10.12-3 and 10.12-4 pages 10.12-3 and 10.12-4
pages 10.12-29 thru 10.12-34 pages 10.12-29 thru 10.12-34
pages 10.12-59 and 10.12-60 pages 10.12-59 and 10.12-60

NOTE 1: Record the removal of a Temporary Revision on the Record of Temporary

Revisions pages in this manual.

NOTE 2: When the manual revision has been inserted in the manual, record the
information required on the Record of Revisions pages in this manual.

NOTE 3: Pages distributed in this revision may include pages from previous
revisions if they are on the opposite side of revised pages. This is done
as a convenience to those users who wish to print a two-sided copy of the
new revision.

This page may be discarded after proper filing of the revision.

(This page is intentionally blank.)
Manual No. 180
30-61-80
Revision 16
October 2013

Propeller Ice Protection

System Manual

Hartzell Propeller Inc.

One Propeller Place
Piqua, Ohio 45356-2634 U.S.A.
Phone: 937.778.4200
Fax: 937.778.4391
 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 - Hartzell Propeller Inc. - All rights reserved

COVER 30-61-80 Cover Back

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

REVISION 16 HIGHLIGHTS

Revised the Cover, Revision Highlights, and List of Effective Pages to match the manual
revision.

Revised the ILLUSTRATED PARTS LIST

Section 10.6
Added installation instructions and figures for de-ice kit 105339
Minor page formatting and renumbering when applicable
Section 10.12
Updated airframe kit 105068
Added airframe kit 105287

30-61-80
Page 1
REVISION HIGHLIGHTS Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

(This page is intentionally blank.)

30-61-80
Page 2
REVISION HIGHLIGHTS Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

REVISION HIGHLIGHTS

1. Introduction
A. General
This is a list of current revisions that have been issued against this manual. Please
compare to RECORD OF REVISIONS page to ensure that all revisions have been
added to the manual.
B. Components
(1) Revision No. indicates the revisions incorporated in this manual.
(2) Issue Date is the date of revision.
(3) Comments indicates the level of the revision.
1 New Issue is a new manual distribution. The manual is distributed in its
entirety. All the revision dates are the same and no change bars are used.
2 Reissue is a revision to an existing manual that includes major content
and/or major format changes. The manual is distributed in its entirety. All
revision dates are the same and no change bars are used.
3 Major Revision is a revision to an existing manual that includes major
content or minor format changes over a large portion of the manual. The
manual is distributed in its entirety. All the revision dates are the same, but
change bars are used to indicate the changes incorporated in the latest
revision of the manual.

30-61-80
Page 3
REVISION HIGHLIGHTS Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

4 Minor Revision is a revision to an existing manual that includes minor

content changes to the manual. Only the revised pages of the manual are
distributed. Each page retains the date and the change bars associated
with the last revision to that page.
Revision No. Issue Date Comments
Original Jul/06 New Issue
1 Nov/06 Major Revision
2 Jun/07 Major Revision
3 Feb/08 Minor Revision
4 Jan/09 Minor Revision
5 Apr/09 Minor Revision
6 Aug/09 Major Revision
7 Dec/09 Minor Revision
8 Apr/10 Minor Revision
9 Jul/10 Minor Revision
10 Feb/11 Minor Revision
11 Jun/11 Minor Revision
12 Oct/11 Minor Revision
13 Jun/12 Minor Revision
14 Jan/13 Minor Revision
15 May/13 Minor Revision
16 Oct/13 Minor Revision

30-61-80
Page 4
REVISION HIGHLIGHTS Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

LIST OF EFFECTIVE PAGES

Chapter Page Rev. Level Date

Cover/Cover Back Cover/Cover Back Rev. 16 Oct/13

Revision Highlights 1 thru 4 Rev. 16 Oct/13
Record of Revisions 1 and 2 Rev. 2 Jun/07
Record of Temporary
Revisions 1 and 2 Rev. 2 Jun/07
Service Document List 1 and 2 Rev. 2 Jun/07
Airworthiness Limitations 1 and 2 Rev. 2 Jun/07
List of Effective Pages 1 thru 6 Rev. 16 Oct/13
Table of Contents 1 and 2 Rev. 4 Jan/09
Introduction 1 thru 12 Rev. 14 Jan/13
Description and Operation 1 thru 4 Rev. 2 Jun/07
Testing and Fault Isolation 1-1 and 1-2 Rev. 2 Jun/07
Automatic Test Requirements 2-1 and 2-2 Rev. 2 Jun/07
Disassembly 3-1 and 3-2 Rev. 2 Jun/07
Cleaning 4-1 and 4-2 Rev. 2 Jun/07
Check 5-1 and 5-2 Rev. 2 Jun/07
Repair/Modification 6-1 and 6-2 Rev. 2 Jun/07
Assembly 7-1 and 7-2 Rev. 2 Jun/07
Fits and Clearances 8-1 and 8-2 Rev. 2 Jun/07
Special Tools, Fixtures,
and Equipment 9-1 and 9-2 Rev. 2 Jun/07
Illustrated Parts List 10-1 Rev. 15 May/13
Illustrated Parts List 10-2 and 10-3 Rev. 16 Oct/13
Illustrated Parts List 10-4 thru 10-6 Rev. 15 May/13
Illustrated Parts List 10-7 Rev. 16 Oct/13
Illustrated Parts List 10-8 and 10-12 Rev. 15 May/13
Illustrated Parts List 10.1-1 and 10.1-2 Rev. 6 Aug/09
Illustrated Parts List 10.2-1 thru 10.2-4 Rev. 6 Aug/09
Illustrated Parts List 10.3-1 Rev. 7 Dec/09
Illustrated Parts List 10.3-2 Rev. 14 Jan/13
Illustrated Parts List 10.3-3 Rev. 15 May/13
Illustrated Parts List 10.3-4 thru 10.3-9 Rev. 14 Jan/13
Illustrated Parts List 10.3-10 Rev. 15 May/13
Illustrated Parts List 10.3-11 thru 10.3-17 Rev. 14 Jan/13
Illustrated Parts List 10.3-18 Rev. 15 May/13
Illustrated Parts List 10.3-18.1 Rev. 15 May/13

LIST OF EFFECTIVE PAGES 30-61-80 Page 1

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

LIST OF EFFECTIVE PAGES

Chapter Page Rev. Level Date

Illustrated Parts List 10.3-18.2 thru 10.3-18.7 Rev. 14 Jan/13

Illustrated Parts List 10.3-18.8 Rev. 12 Oct/11
Illustrated Parts List 10.3-19 Rev. 12 Oct/11
Illustrated Parts List 10.3-20 Rev. 7 Dec/09
Illustrated Parts List 10.3-21 and 10.3-22 Rev. 10 Feb/11
Illustrated Parts List 10.3-23 thru 10.3-36 Rev. 7 Dec/09
Illustrated Parts List 10.3-36.1 thru 10.3-36.6 Rev. 10 Feb/11
Illustrated Parts List 10.3-37 thru 10.3-42 Rev. 7 Dec/09
Illustrated Parts List 10.3-42.1 and 10.3-42.2 Rev. 12 Oct/11
Illustrated Parts List 10.3-43 and 10.3-44 Rev. 12 Oct/11
Illustrated Parts List 10.3-45 and 10.3-46 Rev. 10 Feb/11
Illustrated Parts List 10.3-46.1 Rev. 13 Jun/12
Illustrated Parts List 10.3-46.2 Rev. 14 Jan/13
Illustrated Parts List 10.3-47 and 10.3-48 Rev. 13 Jun/12
Illustrated Parts List 10.3-49 thru 10.3-53 Rev. 7 Dec/09
Illustrated Parts List 10.3-54 Rev. 13 Jun/12
Illustrated Parts List 10.3-55 and 10.3-56 Rev. 7 Dec/09
Illustrated Parts List 10.3-57 and 10.3-58 Rev. 15 May/13
Illustrated Parts List 10.3-59 Rev. 10 Feb/11
Illustrated Parts List 10.3-60 Rev. 13 Jun/12
Illustrated Parts List 10.3-61 thru 10.3-64 Rev. 10 Feb/11
Illustrated Parts List 10.3-65 Rev. 13 Jun/12
Illustrated Parts List 10.3-66 Rev. 7 Dec/09
Illustrated Parts List 10.3-67 thru 10.3-69 Rev. 10 Feb/11
Illustrated Parts List 10.3-70 Rev. 14 Jan/13
Illustrated Parts List 10.3-71 and 10.3-72 Rev. 10 Feb/11
Illustrated Parts List 10.3-73 Rev. 12 Oct/11
Illustrated Parts List 10.3-74 thru 10.3-76 Rev. 14 Jan/13
Illustrated Parts List 10.4-1 thru 10.4-42 Rev. 15 May/13
Illustrated Parts List 10.5-1 thru 10.5-4 Rev. 15 May/13
Illustrated Parts List 10.5-5 and 10.5-6 Rev. 6 Aug/09
Illustrated Parts List 10.5-6.1 thru 10.5-6.4 Rev. 15 May/13
Illustrated Parts List 10.5-7 Rev. 13 Jun/12
Illustrated Parts List 10.5-8 Rev. 11 Jun/11
Illustrated Parts List 10.5-9 Rev. 13 Jun/12

LIST OF EFFECTIVE PAGES 30-61-80 Page 2

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

LIST OF EFFECTIVE PAGES

Chapter Page Rev. Level Date

Illustrated Parts List 10.5-10 Rev. 6 Aug/09

Illustrated Parts List 10.5-11 and 10.5-12 Rev. 14 Jan/13
Illustrated Parts List 10.5-12.1 and 10.5-12.2 Rev. 14 Jan/13
Illustrated Parts List 10.5-13 Rev. 6 Aug/09
Illustrated Parts List 10.5-14 Rev. 13 Jun/12
Illustrated Parts List 10.5-14.1 and 10.5-14.2 Rev. 14 Jan/13
Illustrated Parts List 10.5-15 Rev. 14 Jan/13
Illustrated Parts List 10.5-16 Rev. 13 Jun/12
Illustrated Parts List 10.5-17 and 10.5-18 Rev. 14 Jan/13
Illustrated Parts List 10.5-19 Rev. 6 Aug/09
Illustrated Parts List 10.5-20 Rev. 13 Jun/12
Illustrated Parts List 10.5-21 Rev. 6 Aug/09
Illustrated Parts List 10.5-22 and 10.5-23 Rev. 13 Jun/12
Illustrated Parts List 10.5-24 Rev. 6 Aug/09
Illustrated Parts List 10.5-25 thru 10.5-31 Rev. 13 Jun/12
Illustrated Parts List 10.5-32 Rev. 15 May/13
Illustrated Parts List 10.6-1 thru 10.6-86 Rev. 16 Oct/13
Illustrated Parts List 10.7-1 thru 10.7-22 Rev. 14 Jan/13
Illustrated Parts List 10.8-1 thru 10.8-3 Rev. 6 Aug/09
Illustrated Parts List 10.8-4 Rev. 15 May/13
Illustrated Parts List 10.8.5 and 10.8-6 Rev. 13 Jun/12
Illustrated Parts List 10.8-7 Rev. 6 Aug/09
Illustrated Parts List 10.8-8 thru 10.8-10 Rev. 13 Jun/12
Illustrated Parts List 10.8-10.1 and 10.8-10.2 Rev. 13 Jun/12
Illustrated Parts List 10.8-10.3 Rev. 14 Jan/13
Illustrated Parts List 10.8-10.4 Rev. 15 May/13
Illustrated Parts List 10.8-11 thru 10.8-18 Rev. 6 Aug/09
Illustrated Parts List 10.8-18.1 and 10.8-18.2 Rev. 11 Jun/11
Illustrated Parts List 10.8-18.3 and 10.8-18.4 Rev. 13 Jun/12
Illustrated Parts List 10.8-18.5 and 10.8-18.6 Rev. 15 May/13
Illustrated Parts List 10.8-19 Rev. 6 Aug/09
Illustrated Parts List 10.8-20 Rev. 11 Jun/11
Illustrated Parts List 10.8-21 and 10.8-22 Rev. 6 Aug/09
Illustrated Parts List 10.8-22.1 and 10.8-22.2 Rev. 14 Jan/13

LIST OF EFFECTIVE PAGES 30-61-80 Page 3

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

LIST OF EFFECTIVE PAGES

Chapter Page Rev. Level Date

Illustrated Parts List 10.8-23 thru 10.8-29 Rev. 6 Aug/09

Illustrated Parts List 10.8-30 Rev. 11 Jun/11
Illustrated Parts List 10.8-31 Rev. 6 Aug/09
Illustrated Parts List 10.8-32 Rev. 11 Jun/11
Illustrated Parts List 10.8-33 Rev. 6 Aug/09
Illustrated Parts List 10.8-34 thru 10.8-36 Rev. 11 Jun/11
Illustrated Parts List 10.8-37 thru 10.8-40 Rev. 15 May/13
Illustrated Parts List 10.9-1 thru 10.9-18 Rev. 6 Aug/09
Illustrated Parts List 10.10-1 thru 10.10-3 Rev. 8 Apr/10
Illustrated Parts List 10.10-4 Rev. 14 Jan/13
Illustrated Parts List 10.10-5 thru 10.10-20 Rev. 8 Apr/10
Illustrated Parts List 10.10-21 and 10.10-22 Rev. 10 Feb/11
Illustrated Parts List 10.10-23 thru 10.10-36 Rev. 8 Apr/10
Illustrated Parts List 10.10-36.1 thru 10.10-36.5 Rev. 10 Feb/11
Illustrated Parts List 10.10-36.6 Rev. 13 Jun/12
Illustrated Parts List 10.10-37 thru 10.10-43 Rev. 8 Apr/10
Illustrated Parts List 10.10-44 Rev. 13 Jun/12
Illustrated Parts List 10.10-45 thru 10.10-56 Rev. 8 Apr/10
Illustrated Parts List 10.10-56.1 and 10.10-56.2 Rev. 14 Jan/13
Illustrated Parts List 10.10-57 thru 10.10-62 Rev. 8 Apr/10
Illustrated Parts List 10.10-63 and 10.10-64 Rev. 10 Feb/11
Illustrated Parts List 10.11-1 and 10.11-2 Rev. 7 Dec/09
Illustrated Parts List 10.11-3 Rev. 14 Jan/13
Illustrated Parts List 10.11-4 thru 10.11-21 Rev. 7 Dec/09
Illustrated Parts List 10.11-22 Rev. 8 Apr/10
Illustrated Parts List 10.11-22.1 and 10.11-22.2 Rev. 8 Apr/10
Illustrated Parts List 10.11-22.3 thru 10.11-22.6 Rev. 14 Jan/13
Illustrated Parts List 10.11-23 thru 10.11-38 Rev. 7 Dec/09
Illustrated Parts List 10.11-39 and 10.11-40 Rev. 10 Feb/11
Illustrated Parts List 10.11-41 and 10.11-42 Rev. 7 Dec/09
Illustrated Parts List 10.11-42.1 thru 10.11-42.3 Rev. 8 Apr/10
Illustrated Parts List 10.11-42.4 thru 10.11-42.6 Rev. 14 Jan/13
Illustrated Parts List 10.11-43 thru 10.11-46 Rev. 7 Dec/09
Illustrated Parts List 10.11-47 Rev. 10 Feb/11
Illustrated Parts List 10.11-48 Rev. 14 Jan/13

LIST OF EFFECTIVE PAGES 30-61-80 Page 4

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

LIST OF EFFECTIVE PAGES

Chapter Page Rev. Level Date

Illustrated Parts List 10.12-1 and 10.12-2 Rev. 6 Aug/09

Illustrated Parts List 10.12-3 and 10.12-4 Rev. 16 Oct/13
Illustrated Parts List 10.12-5 thru 10.12-10 Rev. 6 Aug/09
Illustrated Parts List 10.12-10.1 and 10.12-10.2 Rev. 11 Jun/11
Illustrated Parts List 10.12-11 Rev. 9 Jul/10
Illustrated Parts List 10.12-12 thru 10.12-15 Rev. 6 Aug/09
Illustrated Parts List 10.12-16 Rev. 9 Jul/10
Illustrated Parts List 10.12-17 thru 10.12-21 Rev. 6 Aug/09
Illustrated Parts List 10.12-22 thru 10.12-28 Rev. 9 Jul/10
Illustrated Parts List 10.12-29 and 10.12-30 Rev. 16 Oct/13
Illustrated Parts List 10.12-31 Rev. 9 Jul/10
Illustrated Parts List 10.12-32 and 10.12-33 Rev. 16 Oct/13
Illustrated Parts List 10.12-34 Rev. 11 Jun/11
Illustrated Parts List 10.12-35 and 10.12-36 Rev. 9 Jul/10
Illustrated Parts List 10.12-36.1 and 10.12-36.2 Rev. 10 Feb/11
Illustrated Parts List 10.12-37 thru 10.12-42 Rev. 9 Jul/10
Illustrated Parts List 10.12-43 Rev. 10 Feb/11
Illustrated Parts List 10.12-44 thru 10.12-50 Rev. 9 Jul/10
Illustrated Parts List 10.12-51 thru 10.12-59 Rev. 14 Jan/13
Illustrated Parts List 10.12-60 Rev. 16 Oct/13
Illustrated Parts List 10.13-1 and 10.13-2 Rev. 6 Aug/09
Illustrated Parts List 10.13-3 Rev. 11 Jun/11
Illustrated Parts List 10.13-4 Rev. 6 Aug/09
Illustrated Parts List 10.13-5 Rev. 11 Jun/11
Illustrated Parts List 10.13-6 thru 10.13-12 Rev. 6 Aug/09
Illustrated Parts List 10.13-13 thru 10.13-22 Rev. 11 Jun/11
Illustrated Parts List 10.14-1 and 10.14-2 Rev. 6 Aug/09
Illustrated Parts List 10.14-3 and 10.14-4 Rev. 15 May/13
Illustrated Parts List 10.15-1 thru 10.15-3 Rev. 14 Jan/13
Illustrated Parts List 10.15-4 Rev. 15 May/13

LIST OF EFFECTIVE PAGES 30-61-80 Page 5

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

(This page is intentionally blank.)

LIST OF EFFECTIVE PAGES 30-61-80 Page 6

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

ILLUSTRATED PARTS LIST - CONTENTS

10.1 Introduction................................................................................................... 10.1-1

A. General.................................................................................................... 10.1-1
B. Using the Illustrated Parts List................................................................. 10.1-1
10.2 The Illustrated Parts List............................................................................... 10.2-1
A. Detailed Parts List................................................................................... 10.2-1
B. Revisions................................................................................................. 10.2-2
C. Vendors................................................................................................... 10.2-3
10.3 De-ice Kits for Lightweight Turbine Propellers
with Aluminum Blades................................................................................... 10.3-1
1. General.................................................................................................... 10.3-2
2. Installation Instruction.............................................................................. 10.3-5
A. Installation Instruction 10.3-A............................................................. 10.3-5
B. Installation Instruction 10.3-B............................................................. 10.3-6..
C. Installation Instruction 10.3-C............................................................. 10.3-7
D. Installation Instruction 10.3-D............................................................. 10.3-8
E. Installation Instruction 10.3-E........................................................... 10.3-10
F. Installation Instruction 10.3-F............................................................10.3-11
G. Installation Instruction 10.3-G.......................................................... 10.3-12
H. Installation Instruction 10.3-H........................................................... 10.3-14
I. Installation Instruction 10.3-I............................................................ 10.3-15
J. Installation Instruction 10.3-J........................................................... 10.3-16
K. Installation Instruction 10.3-K........................................................... 10.3-18
L. Installation Instruction 10.3-L........................................................ 10.3-18.1
M. Installation Instruction 10.3-M....................................................... 10.3-18.3
N. Installation Instruction 10.3-N........................................................ 10.3-18.5
O. Installation Instruction 10.3-O....................................................... 10.3-18.6

ILLUSTRATED PARTS LIST 30-61-80 Page 10-1

Rev. 15 May/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

ILLUSTRATED PARTS LIST - CONTENTS

10.4 De-ice Kits for Lightweight Turbine Propellers

with Composite Blades................................................................................. 10.4-1
1. General.................................................................................................... 10.4-2
2. Installation Instruction.............................................................................. 10.4-4
A. Installation Instruction 10.4-A............................................................. 10.4-4
B. Installation Instruction 10.4-B............................................................. 10.4-6
C. Installation Instruction 10.4-C............................................................. 10.4-8
D. Installation Instruction 10.4-D........................................................... 10.4-10
10.5 De-ice Kits for Steel Hub Turbine Propellers
with Terminal Clamp Assembly on Clamp..................................................... 10.5-1
1. General.................................................................................................... 10.5-2
2. Installation Instruction.............................................................................. 10.5-4
A. Installation Instuction 10.5-A.............................................................. 10.5-4
10.6 De-ice Kits for Steel Hub Turbine Propellers with Quick Disconnect............ 10.6-1
1. General.................................................................................................... 10.6-2
2. Installation Instruction.............................................................................. 10.6-5
A. Installation Instruction 10.6-A............................................................. 10.6-5
B. Installation Instruction 10.6-B............................................................. 10.6-7
C. Installation Instruction 10.6-C............................................................. 10.6-9
D. Installation Instruction 10.6-D............................................................10.6-11
E. Installation Instruction 10.6-E........................................................... 10.6-13
F. Installation Instruction 10.6-F........................................................... 10.6-15
G. Installation Instruction 10.6-G.......................................................... 10.6-17
10.7 De-ice Kits for Steel Hub Turbine Propellers
with Terminal Block on Counterweight.......................................................... 10.7-1
1. General.................................................................................................... 10.7-3
2. Installation Instruction.............................................................................. 10.7-4
A. Installation Instruction 10.7-A............................................................. 10.7-4

ILLUSTRATED PARTS LIST 30-61-80 Page 10-2

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

ILLUSTRATED PARTS LIST - CONTENTS

10.8 De-ice Kits for Non-Counterweighted Compact Propellers........................... 10.8-1
1. General.................................................................................................... 10.8-2
2. Installation Instructions............................................................................ 10.8-5
A. Installation Instruction 10.8-A............................................................. 10.8-5
B. Installation Instruction 10.8-B............................................................. 10.8-6
C. Installation Instruction 10.8-C............................................................. 10.8-7
D. Installation Instruction 10.8-D............................................................. 10.8-8
E. Installation Instruction 10.8-E............................................................. 10.8-9
F. Installation Instruction 10.8-F........................................................... 10.8-10
G. Installation Instruction 10.8-G....................................................... 10.8-10.1
H. Installation Instruction 10.8-H........................................................ 10.8-10.2
I. Installation Instruction 10.8-I......................................................... 10.8-10.3
J. Installation Instruction 10.8-J........................................................ 10.8-10.4
10.9 De-ice Kits for Non-Counterweighted Compact Propellers
with Composite Blades................................................................................. 10.9-1
1. General.................................................................................................... 10.9-3
2. Installation Instruction.............................................................................. 10.9-4
A. Installation Instruction 10.9-A............................................................. 10.9-4
B. Installation Instruction 10.9-B............................................................. 10.9-5
C. Installation Instruction 10.9-C............................................................. 10.9-6
10.10 De-ice Kits for Counterweighted Compact Propellers................................. 10.10-1
1. General.................................................................................................. 10.10-3
2. Installation Instruction............................................................................ 10.10-6
A. Installation Instruction 10.10-A......................................................... 10.10-6
B. Installation Instruction 10.10-B......................................................... 10.10-8
C. Installation Instruction 10.10-C....................................................... 10.10-10
D. Installation Instruction 10.10-D....................................................... 10.10-12
E. Installation Instruction 10.10-E....................................................... 10.10-14
F. Installation Instruction 10.10-F....................................................... 10.10-16
G. Installation Instruction 10.10-G...................................................... 10.10-18
H. Installation Instruction 10.10-H....................................................... 10.10-19
I. Installation Instruction 10.10-I........................................................ 10.10-21

ILLUSTRATED PARTS LIST 30-61-80 Page 10-3

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

ILLUSTRATED PARTS LIST - CONTENTS

10.11 Anti-ice Kits..................................................................................................10.11-1

1. General...................................................................................................10.11-2
2. Installation Instruction.............................................................................10.11-4
A. Installation Instruction 10.11-A..........................................................10.11-4
B. Installation Instruction 10.11-B..........................................................10.11-6
C. Installation Instruction 10.11-C..........................................................10.11-8
D. Installation Instruction 10.11-D........................................................10.11-10
E. Installation Instruction 10.11-E........................................................10.11-12
F. Installation Instruction 10.11-F........................................................10.11-14
G. Installation Instruction 10.11-G........................................................10.11-16
H. Installation Instruction 10.11-H........................................................10.11-18
I. Installation Instruction 10.11-I.........................................................10.11-20
J. Installation Instruction 10.11-J.........................................................10.11-22
K. Installation Instruction 10.11-K.....................................................10.11-22.3
L Installation Instruction 10.11-L......................................................10.11-22.5
10.12 Airframe Kits............................................................................................... 10.12-1
1. General.................................................................................................. 10.12-2
2. Installation Instruction............................................................................ 10.12-5
A. Installation Instruction 10.12-A......................................................... 10.12-5
B. Installation Instruction 10.12-B......................................................... 10.12-6
C. Installation Instruction 10.12-C......................................................... 10.12-7
D. Installation Instruction 10.12-D......................................................... 10.12-8
E. Installation Instruction 10.12-E......................................................... 10.12-9
F. Installation Instruction 10.12-F....................................................... 10.12-10
G. Installation Instruction 10.12-G................................................... 10.12-10.1
H. Installation Instruction 10.12-H.................................................... 10.12-10.2
10.13 Brush Block Assemblies.............................................................................. 10.13-1
10.14 De-ice Boots and Anti-icing Boots............................................................... 10.14-1
10.15 De-ice Overhaul Kits................................................................................... 10.15-1

ILLUSTRATED PARTS LIST 30-61-80 Page 10-4

Rev. 15 May/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

ILLUSTRATED PARTS LIST - FIGURES

10.6 De-ice Kits for Steel Hub Turbine Propellers with Quick Disconnect
Terminal Strip to Bulkhead Attachment.........................Figure 10.6-1............ 10.6-20
Leadwire to Terminal Strip Attachment.........................Figure 10.6-2............ 10.6-21
Loop Clamp to Bulkhead Attachment............................Figure 10.6-3............ 10.6-22
Terminal Strip to Counterweight Clamp Attachment.....Figure 10.6-4............ 10.6-23
Loop Clamp to Counterweight Clamp Attachment........Figure 10.6-5............ 10.6-24
Loop Clamp to Bulkhead Orientation............................Figure 10.6-6............ 10.6-25
Loop Clamp to Bulkhead Orientation............................Figure 10.6-7............ 10.6-26
Loop Clamp to Bulkhead Orientation............................Figure 10.6-8............ 10.6-27
Loop Clamp to Bulkhead Orientation............................Figure 10.6-9............ 10.6-28
Orientation of the Loop Clamp to Terminal Strip
on the Bulkhead......................................................Figure 10.6-10.......... 10.6-29
Orientation of the Loop Clamp to Terminal Strip
on the Bulkhead......................................................Figure 10.6-11.......... 10.6-30
Wire Harness and Tie Strap to Clamp..........................Figure 10.6-12.......... 10.6-31
Wire Harness and Tie Strap to Clamp..........................Figure 10.6-13.......... 10.6-33
Wire Harness and Tie Straps to Clamp.........................Figure 10.6-14.......... 10.6-35
Wire Harness and Tie Straps to Clamp.........................Figure 10.6-15.......... 10.6-36
Wire Harness and Tie Straps to Clamp.........................Figure 10.6-16.......... 10.6-38
Wire Harness and Tie Straps to Clamp.........................Figure 10.6-17.......... 10.6-40
Slip Ring Mounting........................................................Figure 10.6-18.......... 10.6-41
Slip Ring Mounting........................................................Figure 10.6-19.......... 10.6-42
Slip Ring Mounting........................................................Figure 10.6-20.......... 10.6-43
Slip Ring Mounting........................................................Figure 10.6-21.......... 10.6-44
Slip Ring Mounting........................................................Figure 10.6-22.......... 10.6-45
Slip Ring Mounting........................................................Figure 10.6-23.......... 10.6-46
Slip Ring Mounting........................................................Figure 10.6-24.......... 10.6-47
10.7 De-ice Kits for Steel Hub Turbine Propellers with Terminal Block on Counterweight
Terminal Strip to Bulkhead Attachment.........................Figure 10.7-1.............. 10.7-7
Loop Clamp to Bulkhead Attachment............................Figure 10.7-2.............. 10.7-8
Terminal Strip to Counterweight Clamp Attachment.....Figure 10.7-3.............. 10.7-9
Loop Clamp to Counterweight Clamp Attachment........Figure 10.7-4............ 10.7-10

ILLUSTRATED PARTS LIST 30-61-80 Page 10-7

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

ILLUSTRATED PARTS LIST - FIGURES

Terminal Strip to Bulkhead Attachment.........................Figure 10.7-5............ 10.7-11

Leadwire to Terminal Strip Attachment (Bulkhead).......Figure 10.7-6............ 10.7-12
Terminal Strip to Counterweight Clamp Attachment.....Figure 10.7-7............ 10.7-13
Slip Ring Mounting........................................................Figure 10.7-8............ 10.7-14
10.8 De-ice Kits for Non-Counterweighted Compact Propellers
De-ice Boot Leadwire Attachment to Bulkhead.............Figure 10.8-1............ 10.8-11
Slip Ring Wire Harness Attachment to Slip Ring..........Figure 10.8-2............ 10.8-12
Slip Ring Wire Harness Attachment to Slip Ring..........Figure 10.8-3............ 10.8-13
Securing Slip Ring Leadwire or Wire Harness to Hub..Figure 10.8-4............ 10.8-14
Securing De-ice Boot Leadwire Bracket to Hub and
De-ice Boot Leadwire to Bracket............................Figure 10.8-5............ 10.8-15
De-ice Boot Leadwire and Slip Ring Leadwire or
Wire Harness to Bulkhead......................................Figure 10.8-6............ 10.8-16
Loop Clamp to Bulkhead Attachment............................Figure 10.8-7............ 10.8-17
Loop Clamp Orientation................................................Figure 10.8-8............ 10.8-18
Lead Clip and De-ice Boot Leadstrap and
Leadwire Attachment to Bulkhead..........................Figure 10.8-8.1...... 10.8-18.1
Securing Slip Ring Wire Harness to Hub......................Figure 10.8-8.2...... 10.8-18.2
Securing Slip Ring Wire Harness to Hub......................Figure 10.8-8.3...... 10.8-18.3
Lead Clip and De-ice Boot Leadstrap and
Leadwire Attachment to Bulkhead..........................Figure 10.8-8.4...... 10.8-18.4
Lead Clip and De-ice Boot Leadstrap and
Leadwire Attachment to Bulkhead..........................Figure 10.8-8.5...... 10.8-18.5
Lead Clip Attachment to Bulkhead................................Figure 10.8-9............ 10.8-19
Lead Clip and De-ice Boot Leadstrap and
Leadwires Attachment to Bulkhead.........................Figure 10.8-10.......... 10.8-20
Lead Clip and De-ice Boot Leadstrap and
Leadwires Attachment to Bulkhead.........................Figure 10.8-11.......... 10.8-21
Slip Ring Wire Harness Attachment to Slip Ring
Pulley and Hub........................................................Figure 10.8-12.......... 10.8-22
Securing Slip Ring Wire Harness to Hub......................Figure 10.8-13....... 10.8-22.1

ILLUSTRATED PARTS LIST 30-61-80 Page 10-8

Rev. 15 May/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

10.6 De-ice Kits for Steel Hub Turbine Propellers with

Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-1

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

1. General
A. The approved installation instructions for the de-ice harness and the loop clamp
are identified as the "Approved Installation Instructions" in Table 10.6-1. The latest
approved revision of the Approved Installation Instructions is shown in Table 10.6-1.

NOTE 1: The installation instructions contained in this section supersedes information

contained on the Approved Installation Instructions.

NOTE 2: Use only the revision level of the Approved Installation Instructions shown
in Table 10.6-1. Later revisions of those instructions may not have Hartzell
Propeller Inc. approval. A manufacturer's Installation Drawing that contains
Hartzell Propeller Inc. approved data may also contain data that is not within
Hartzell Propeller Inc.s authority to approve (such as the installation of
airframe mounted components) and therefore is not approved by Hartzell
Propeller Inc. Contact Hartzell Propeller Inc. if you have a question about the
approval status of a particular manufacturer's Installation Drawing.

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-2

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

Kit Part Number Vendor Approved Installation

Instructions
7931-5E2691 Goodrich Corporation 5E2691 Rev. B
7931-5E2715-1 Goodrich Corporation 5E5715 Rev. J
7931-5E2782-1 Hartzell Propeller Inc. Installation Instruction 10.6-C,
Figures 10.6-1, 10.6-2, 10.6-3,
10.6-7, 10.6-14, and 10.6-18
7931-5E2792-1 Hartzell Propeller Inc. Installation Instruction 10.6-C,
Figures 10.6-1, 10.6-2, 10.6-3,
10.6-7, 10.6-14, and 10.6-18
7931-5E2796-1 Goodrich Corporation 5E2796 Rev. A
7931-5E2803-1 Goodrich Corporation 5E2803 Rev. B
7931-65-210-1A Goodrich Corporation 7E1357 Rev. H
7931-65-410-1 Goodrich Corporation 7E1490 Rev. A
7931-65-470-1 Goodrich Corporation 7E1534 Rev. G
7931-65-470-3 Goodrich Corporation 7E1534 Rev. G
7931-67-050-1 Goodrich Corporation 7E1464 Rev. D
7931-67-060-2 Goodrich Corporation 7E1470 Rev. R
7931-67-060-4 Goodrich Corporation 7E1470 Rev. R
7931-67-060-4AL Goodrich Corporation 7E1470 Rev. R
7931-67-110-1 Goodrich Corporation 7E1389 Rev. J
7931-67-245-1 Goodrich Corporation 7E1487 Rev. K
7931-67-250-2 Goodrich Corporation 7E1446 Rev. F
7931-67-265-1 Goodrich Corporation 7E1448 Rev. H
7931-67-265-2 Goodrich Corporation 7E1448 Rev. H
7931-67-280-2 Goodrich Corporation 7E1445 Rev. K
7931-67-340-5 Goodrich Corporation 7E1492 Rev. U
7931-67-440-1 Goodrich Corporation 7E1559 Rev. H
7931-67-510-3 Goodrich Corporation 7E1789 Rev. D
7931-67-570-1 Goodrich Corporation 7E1654 Rev. B
7931-67-610-1 Goodrich Corporation 7E1731 Rev. D
7931-67-625-1 Goodrich Corporation 7E1701 Rev. L
7931-67-760-1 Goodrich Corporation 7E1764 Rev. F
7931-67-825-1 Goodrich Corporation 7E1778 Rev. G

De-ice Kits and Approved Installation Instructions for

Steel Hub Turbine Propellers with Quick Disconnect
Table 10.6-1

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-3

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

Kit Part Number Vendor Approved Installation

Instructions
7931-67-825-2 Goodrich Corporation 7E1778 Rev. G
7931-67-825-3 Goodrich Corporation 7E1778 Rev. G
7931-67-830-1 Goodrich Corporation 7E1780 Rev. B
7931-67-920-1 Goodrich Corporation 5E2602 Rev. B
7931-67-929-1 Goodrich Corporation 7E1804 Rev. B
102195-1 Hartzell Propeller Inc. Installation Instruction 10.6-A,
Figures 10.6-1, 10.6-2, 10.6-3,
10.6-6, 10.6-12, and 10.6-20
102655-1 Hartzell Propeller Inc. Installation Instruction 10.6-B,
Figures 10.6-1, 10.6-2, 10.6-9,
10.6-13, and 10.6-19
104116 Hartzell Propeller Inc. Installation Instruction 10.6-D,
Figures 10.6-1, 10.6-2, 10.6-3,
10.6-8, 10.6-15, and 10.6-21
104251 Hartzell Propeller Inc. Installation Instruction 10.6-E,
Figures 10.6-1, 10.6-2, 10.6-3,
10.6-5, 10.6-10, 10.6-16,
and 10.6-22
104334-1 Hartzell Propeller Inc. Installation Instruction 10.6-F,
Figures 10.6-1, 10.6-2, 10.6-3,
10.6-11, 10.6-17, and 10.6-23
105339 Hartzell Propeller Inc. Installation Instruction 10.6-G,
Figures 10.6-1, 10.6-2, 10.6-3,
10.6-8, 10.6-15, and 10.6-24

De-ice Kits and Approved Installation Instructions for

Steel Hub Turbine Propellers with Quick Disconnect
Table 10.6-1 (Continued)

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-4

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

2. Installation Instruction
A. Installation Instruction 10.6-A
(1) Using the bolts (1160), Belleville spring washers (1180), washers (1200), and
nuts (1190), attach the slip ring (1140) to the spinner split mounting plate as
shown in Figure 10.6-20. Torque the bolts (1160) to 40-120 in. lbs.
(4.51-13.55 Nm). Perform slip ring run-out check in accordance with Hartzell
Propeller Inc. Propeller Ice Protection System Component Maintenance
Manual 181 (30-60-81).
(2) Position the propeller blades at reverse blade angle.
(3) Assemble the plug connection between the wire harness (890) and the de-ice
boot.
(4) Install the tie strap (920) around the wire harness/de-ice boot plug connection.
Do not tighten at this time.
(5) Secure the wire harness/de-ice boot connection to the clamp.
(a) Install tie straps (930) under the tie strap (920) connecting the wire
harness/de-ice boot plugs, and around the clamp as shown in
Figure 10.6-12.
(b) Positioning the tie strap head in the approximate location shown on the
side of the clamp as shown in Figure 10.6-12. Do not tighten the tie strap
(930) at this time.
(6) Route the wire harness (890) over the inboard tie strap (930) and under the
outboard tie strap (930) as shown in Figure 10.6-12.
(7) Position the center of the wire harness/de-ice boot plug connection in line with
the aft side of the counterweight within 0.125 inch (3.175 mm) as shown in
Figure 10.6-12.
(8) Using a tie strap (920), secure the de-ice boot leadwire to the outboard tie
strap (930) as shown in Figure 10.6-12. The tie strap (920) must cover the
de-ice boot leadwire tubing. Do not tighten at this time.
(9) Using tie strap (920) secure the wire harness (890) to the outboard tie strap
(930) as shown in Figure 10.6-12. The tie strap (920) must located with 0.125
inch (3.175 mm) of the blade clamp parting line. Do not tighten at this time.
(10) Position the wire harness/de-ice boot plug connection as shown in
Figure 10.6-12.
(11) Tighten all the tie straps (910, 920, and 930).
(12) Position one tie strap (910) around the bottom of the de-ice boot as shown in
Figure 10.6-12.

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-5

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

(13) Using screws (220), washers (200), the applicable configuration,

Figure 10.6-1, and Figure 10.6-2, attach the terminal strip (170) to the
bulkhead.
(14) Torque 10-12 in. lb. (1.12-1.35 Nm).
(15) Install the slip ring lead wires and de-ice wire harness (890) to the terminal strip
(170) in accordance with Figure 10.6-2. Tighten the terminal screws until snug.
(16) Install the clamp (590), around the wire harness (890) as shown in
Figures 10.6-6.
(17) Using screws (610), washers (610 and/or 630), nuts (600), Figure 10.6-3,
Figure 10.6-6, and the applicable configuration, install the clamp (590) to the
bulkhead. Orient the centerline of the clamp (590) parallel to terminal strip
(170).
(18) Torque the screw (610) to 22-25 in. lbs. (2.48-2.82 Nm).

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-6

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

B. Installation Instruction 10.6-B

(1) Mark the Indication Line on the wire harness (890) in accordance with
Figure 10.6-13.
(2) With spinner mounting bracket installed on the hub, use the bolts (1160), and
washers (1200, 1210, and 1215) attach the slip ring (1140) to the spinner
mounting bracket as shown in Figure 10.6-19. Torque the bolts (1160) to
90-120 in. lbs. (10.8 -13.5 Nm). Perform slip ring run-out check in accordance
with Hartzell Propeller Inc. Propeller Ice Protection System Component
Maintenance Manual 181 (30-60-81).
(3) Position the propeller blades at reverse blade angle.
(4) Assemble the plug connection between the wire harness (890) and the de-ice
boot.
(5) Install the tie strap (920) around the wire harness/de-ice boot plug connection.
Do not tighten at this time.
(6) Secure the wire harness/de-ice boot connection to the clamp.
(a) Install tie straps (930) under the tie strap (920) connecting the wire
harness/de-ice boot plugs, and around the clamp as shown in
Figure 10.6-13.
(b) Position the tie strap head in the approximate location shown on the side
of the clamp as shown in Figure 10.6-13. Do not tighten the tie strap (930)
at this time.
(7) Position the center of the wire harness/de-ice boot plug connection as shown in
Figure 10.6-13.
(8) Using a tie strap (920), secure the de-ice boot leadwire to the outboard tie strap
(930) as shown in Figure 10.6-13. The tie strap (920) must cover the de-ice
boot leadwire tubing. Do not tighten at this time.
(9) Locate the Indication Line with the tie strap (930) as shown in Figure 10.6-13.
(10) Using tie strap (920) secure the wire harness (890) to the inboard tie strap
(930) as shown in Figure 10.6-13. Do not tighten at this time.
(11) Position the wire harness/de-ice boot plug connection as shown in
Figure 10.6-13. Make sure the tie strap is above the lubrication fitting.
(12) Position one tie strap (910) around the bottom of the de-ice boot as shown in
Figure 10.6-13.
(13) Tighten all the tie straps (910, 920, and 930).
(14) Using screws (220), washers (200), the applicable configuration,
Figure 10.6-1, and Figure 10.6-2, attach the terminal strip (170) to the
bulkhead.
(15) Torque the screw (220) to 10-12 in. lb. (1.12-1.35 Nm).

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-7

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

(15) Install the slip ring lead wires and de-ice wire harness (890) to the terminal strip
(170) in accordance with Figure 10.6-2. Tighten the terminal screws until snug.
(16) Install the clamp (590), around the wire harness (890) as shown in
Figures 10.6-9.
(17) Using screws (610), washers (610 and/or 630), nuts (600), and
Figure 10.6-9, install the clamp (590) to the bulkhead.
(18) Torque the screw (610) to 22-25 in. lbs. (2.48-2.82 Nm).

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-8

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

C. Installation Instruction 10.6-C

(1) Using the bolts (1160 and 1170), Belleville spring washers (1180), washers
(1200 and 1210), and nuts (1190), attach the slip ring (1140) to the spinner split
mounting plate as shown in Figure 10.6-18. Torque the bolts (1160) to
40-120 in. lbs. (4.51-13.55 Nm). Perform slip ring run-out check in accordance
with Hartzell Propeller Inc. Propeller Ice Protection System Component
Maintenance Manual 181 (30-60-81).
(2) Position the propeller blades at reverse blade angle.
(3) Assemble the plug connection between the wire harness (890) and the de-ice
boot.
(4) Install the tie strap (920) around the wire harness/de-ice boot plug connection.
Do not tighten at this time.
(5) Secure the wire harness/de-ice boot connection to the clamp.
(a) Install tie straps (930) under the tie strap (920) connecting the wire
harness/de-ice boot plugs, and around the clamp as shown in
Figure 10.6-14. Do not tighten at this time.
(b) Position the inboard tie strap (930) inboard of the lubrication fitting.
(c) Position the outboard tie strap (930) outboard of the lubrication fitting.
(d) Position the tie strap head in the approximate location shown on the side
of the clamp as shown in Figure 10.6-14. Do not tighten the tie strap (930)
at this time.
(6) Route the wire harness (890) over the inboard tie strap (930) and under the
outboard tie strap (930) as shown in Figure 10.6-14.
(7) Using a tie strap (920), secure the de-ice boot leadwire to the outboard tie strap
(930) as shown in Figure 10.6-14. Do not tighten at this time.
(8) Using tie strap (920), secure the wire harness (890) to the outboard tie strap
(930) as shown in Figure 10.6-14.
(9) The tie straps (920) must be located as shown in Figure 10.6-14. Do not tighten
at this time.
(10) Position the wire harness/de-ice boot plug connection as shown in
Figure 10.6-14.
(11) Tighten all the tie straps (920 and 930).
(12) Using screws (220), washers (200), the applicable conguration,
Figure 10.6-1, and Figure 10.6-2, attach the terminal strip (170) to the
bulkhead.
(13) Torque the screws (220) to 10-12 in. lb. (1.12-1.35 Nm).

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-9

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

(14) Install the slip ring lead wires and de-ice wire harness (890) to the terminal strip
(170) in accordance with Figure 10.6-2. Tighten the terminal screws until snug.
(15) Install the clamp (590) around the wire harness (890) as shown in
Figures 10.6-6.
(16) Using screws (610), washers (610 and/or 630), nuts (600), Figure 10.6-3,
Figure 10.6-6, and the applicable configuration, install the clamp (590) to the
bulkhead. Orient the centerline of the clamp (590) parallel to terminal
strip (170).
(17) Torque the screw (610) to 22-25 in. lbs. (2.48-2.82 Nm).

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-10

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

D. Installation Instruction 10.6-D

(1) Using the screws (1170), Belleville spring washers (1180), washers (1200), and
nuts (1190), attach the slip ring (1140) to the spinner split mounting plate as
shown in Figure 10.6-21.
(2) Torque the screws (1170) to 96-120 in. lb. (10.1-13.5 Nm).
(3) Perform slip ring run-out check in accordance with Hartzell Propeller Inc.
Propeller Ice Protection System Component Maintenance Manual 181
(30-60-81).
(4) Position the propeller blades at high blade angle.
(5) Assemble the plug connection between the wire harness (890) and the de-ice
boot.
(6) Install the tie strap (920) around the wire harness/de-ice boot plug connection.
Do not tighten at this time.
(7) Secure the wire harness/de-ice boot connection to the clamp.
(a) Install two tie straps (930) under the tie strap (920), and over the
wire harness/de-ice boot plugs, and around the clamp as shown in
Figure 10.6-15. Do not tighten at this time.
(b) Position the two tie straps (930) outboard of the lubrication fitting.
(c) Position the tie strap heads in the approximate location shown on the side
of the clamp as shown in Figure 10.6-15. Do not tighten the tie straps
(930) at this time.
(8) Route the wire harness (890) over the inboard tie strap (930) and under the
outboard tie strap (930) as shown in Figure 10.6-15.
(9) Using a tie strap (920), secure the de-ice boot leadwire to the outboard tie strap
(930) as shown in Figure 10.6-15. Do not tighten at this time.
(10) The tie strap (920) must be located as shown in Figure 10.6-15. Do not tighten
at this time.
(11) Position the wire harness/de-ice boot plug connection as shown in
Figure 10.6-15.
(12) Tighten all the tie straps (920 and 930).
(13) Using screws (220), washers (200), the applicable conguration,
Figure 10.6-1, and Figure 10.6-2, attach the terminal strip (170) to the
bulkhead.
(14) Torque the screws (220) to 10-12 in. lb. (1.12-1.35 Nm).
(15) Install the slip ring lead wires and de-ice wire harness (890) to the terminal strip
(170) in accordance with Figure 10.6-2, typical two wire configuration. Tighten
the terminal screws until snug.

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-11

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

(16) Install the clamp (590) around the wire harness (890) as shown in
Figures 10.6-8.
(17) Using screws (610), washers (610 and/or 630), nuts (600), Figure 10.6-3,
Figure 10.6-8, and the applicable configuration, install the clamp (590) to the
bulkhead. Orient the centerline of the clamp (590) parallel to terminal
strip (170).
(18) Torque the screw (610) to 22-25 in. lbs. (2.48-2.82 Nm).

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-12

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

E. Installation Instruction 10.6-E

(1) Using the bolts (1170 and 1155), Belleville spring washers (1180), washers
(1200), and nuts (1190), attach the slip ring (1140) to the spinner split mounting
plate as shown in Figure 10.6-22.

NOTE: A longer bolt (1155) is required for installation through the start lock.
(2) Torque the nuts (1190) to 40-120 in. lb. (4.5-13.5 Nm).
(3) Perform slip ring run-out check in accordance with Hartzell Propeller Inc.
Propeller Ice Protection System Component Maintenance Manual 181
(30-60-81).
(4) Position the propeller blades at reverse blade angle.
(5) Assemble the plug connection between the wire harness (890) and the de-ice
boot.
(6) Install the tie strap (910) around the wire harness/de-ice boot plug connection.
(7) Postion the tie strap head as shown in Figure 10.6-16 and tighten the tie strap.
(8) Install the clamp (660) around the wire harness (890) as shown in
Figures 10.6-16.
(9) Using screw (650), and washer (665), and the applicable configuration, install
the clamp (660) to the counterweight clamp as shown in Figure 10.6-5.
(10) Torque the screw (650) to 22-25 in. lbs. (2.48-2.82 Nm).
(11) Position the wire harness/de-ice boot connection under the counterweight on
the clamp.
(a) Install two tie straps (920) under the tie strap (910) and around the
counterweight in an "X" configuration as shown in Figure 10.6-16.
(b) Position the heads of the two tie straps (920) as shown in Figure 10.6-16
and tighten the tie straps.
(12) Install a tie strap (930) around the blade and over the de-ice boot leadwire
0.125 - 0.375 inch (3.17 - 9.52 mm) from the outboard edge of the
counterweight clamp as shown in Figure 10.6-16.
(13) Tighten the tie strap (930).
(14) Install a tie strap (930) around the counterweight clamp and over the de-ice
boot leadwire as shown in Figure 10.6-16. Do not tighten at this time.
(15) Position the de-ice boot leadwire towards the counterweight clamp parting line
to remove slack in the de-ice boot leadwire.
(16) Position the head of the tie strap (930) as shown in Figure 10.6-16.
(17) Tighten the tie strap (930).

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-13

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

(18) Using screws (220) and washers (200) attach the terminal strip (170) to the
bulkhead as shown in the applicable conguration and Figure 10.6-1.
(19) Torque the screws (220) to 10-12 in. lb. (1.12-1.35 Nm).
(20) Install the slip ring lead wires and de-ice wire harness (890) to the terminal strip
(170) in accordance with Figure 10.6-2, typical three wire configuration.
(21) Tighten the terminal screws until snug.
(22) Install the clamp (590) around the wire harness (890) as shown in
Figures 10.6-10.
(23) Using screw (610), washer (630), and nut (600), install the clamp (590) to the
bulkhead as shown in Figure 10.6-3, and the applicable configuration.
(24) Orient the centerline of the clamp (590) with the "A" screw on the terminal strip
(170).
(25) Torque the screw (610) to 22-25 in. lbs. (2.48-2.82 Nm).

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-14

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

F. Installation Instruction 10.6-F

(1) Using the bolts (1170 and 1155), Belleville spring washers (1180), washers
(1200), and nuts (1190), attach the slip ring (1140) to the spinner split mounting
plate as shown in Figure 10.6-23.
(2) Torque the nuts (1190) to 40-120 in. lb. (4.5-13.5 Nm).
(3) Perform slip ring run-out check in accordance with Hartzell Propeller Inc.
Propeller Ice Protection System Component Maintenance Manual 181
(30-60-81).
(4) Position the propeller blades at reverse blade angle.
(5) Assemble the plug connection between the wire harness (890) and the de-ice
boot.
(6) Install the tie strap (910) around the wire harness/de-ice boot plug connection.
(7) Postion the tie strap (910) head as shown in Figure 10.6-17.
(8) Do not tighten the tie strap (910) at this time.
(9) Install two tie straps (930) under the tie strap (910), over the plug connection,
and around the clamp as shown in Figure 10.6-17.
(10) Do not tighten the tie straps (930) at this time.
(11) Route the wire harness (890) leadwires over the inboard tie strap (930) and
under the outboard tie strap (930).
(12) Position the plug connection on the clamp as shown in Figure 10.6-17.
(13) Using tie strap (910), secure the plug connection to the outboard tie strap (930).
(14) Do not tighten the tie strap (910) at this time.
(15) Using tie strap (910), secure the wire harness (890) to the outboard tie strap
(930). The centerline of the tie strap (910) must be positioned over the wire
harness (890) to meet the dimensional specifications shown in Figure 10.6-17.
(16) Do not tighten the tie strap (910) at this time.
(17) Make sure that the inboard tie strap (930) is positioned outboard of the
lubrication fitting as shown in Figure 10.6-17.
(18) Tighten the all of the tie straps (910 and 930).
(19) Using tie strap (930), secure the de-ice boot leadwires to the blade as shown in
Figure 10.6-17.
(20) Using screws (220) and washers (200) attach the terminal strip (170) to the
bulkhead as shown in the applicable conguration and Figure 10.6-1.
(21) Torque the screws (220) to 10-12 in. lb. (1.12-1.35 Nm).
(22) Install the slip ring lead wires and de-ice wire harness (890) to the terminal strip
(170) in accordance with Figure 10.6-2, typical three wire configuration.

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-15

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

(23) Tighten the terminal screws until snug.

(24) Install the clamp (590) around the wire harness (890) as shown in
Figures 10.6-13.
(25) Using screw (610), washer (630), and nut (600) install the clamp (590) to the
bulkhead as shown in Figure 10.6-3 and the applicable configuration.
(26) Orient the centerline of the clamp (590) with the terminal screw on the terminal
strip (170) as shown in Figure 10.6-11.
(27) Torque the screw (610) to 22-25 in. lbs. (2.48-2.82 Nm).

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-16

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

G. Installation Instruction 10.6-G

(1) Using the screws (1155 and 1170), Belleville spring washers (1180), washers
(1200), and nuts (1190), attach the slip ring (1140) to the spinner split mounting
plate as shown in Figure 10.6-24.
(2) Torque the screws (1155 and 1170) to 96-120 in. lb. (10.1-13.5 Nm).
(3) Perform a slip ring run-out check in accordance with Hartzell Propeller Inc.
Propeller Ice Protection System Component Maintenance Manual 181
(30-60-81).
(4) Position the propeller blades at high blade angle.
(5) Assemble the plug connection between the wire harness (890) and the de-ice
boot.
(6) Install the tie strap (920) around the wire harness/de-ice boot plug connection.
Do not tighten at this time.
(7) Secure the wire harness/de-ice boot connection to the clamp.
(a) Install two tie straps (930) under the tie strap (920), over the
wire harness/de-ice boot plugs, and around the clamp as shown in
Figure 10.6-15. Do not tighten at this time.
(b) Position the two tie straps (930) outboard of the lubrication fitting.
(c) Position the tie strap heads in the approximate location on the side of the
clamp as shown in Figure 10.6-15. Do not tighten the tie straps (930) at
this time.
(8) Route the wire harness (890) over the inboard tie strap (930) and under the
outboard tie strap (930) as shown in Figure 10.6-15.
(9) Using a tie strap (920), secure the de-ice boot leadwire to the outboard tie strap
(930) as shown in Figure 10.6-15. Do not tighten at this time.
(10) The tie strap (920) must be located as shown in Figure 10.6-15. Do not tighten
at this time.
(11) Position the wire harness/de-ice boot plug connection as shown in
Figure 10.6-15.
(12) Tighten all the tie straps (920 and 930).
(13) Using screws (220), washers (200), the applicable conguration,
Figure 10.6-1, and Figure 10.6-2, attach the terminal strip (170) to the
bulkhead.
(14) Torque the screws (220) to 10-12 in. lb. (1.12-1.35 Nm).
(15) Install the slip ring lead wires and de-ice wire harness (890) to the terminal strip
(170) in accordance with Figure 10.6-2, typical two wire configuration. Tighten
the terminal screws until snug.

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-17

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

(16) Install the clamp (590) around the wire harness (890) as shown in
Figures 10.6-8.
(17) Using screws (610), washers (630), nuts (600), Figure 10.6-3, Figure 10.6-8,
and the applicable configuration, install the clamp (590) to the bulkhead. Orient
the centerline of the clamp (590) parallel to terminal strip (170).
(18) Torque the screw (610) to 22-25 in. lbs. (2.48-2.82 Nm).

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-18

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

(This page is intentionally blank.)

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-19

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

TI-00180BT.EPS
TI-00180DT.EPS
TI-00180ET.EPS

Configuration BT Configuration DT

220 220

200 200

170 170

Bulkhead Bulkhead
210

180

Configuration ET

220

200

170
Replacement hardware for attaching the wire
harnesses to the terminal strip assembly. This is
230 supplied with a new terminal strip assembly.
Bulkhead Terminal Strip P/N Split-lock Screw P/N
Washer P/N
1H1150-(2,3) B-3854-40 B-6637-13

Terminal Strip to Bulkhead Attachment

Figure 10.6-1

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-20

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

220

890
200 1140

170

Spinner Bulkhead

Typical Two Wire configuration

Outboard

Inboard

Ground

220

890
200 1140

170

Spinner Bulkhead

Typical Three Wire configuration

Leadwire to Terminal Strip Attachment

Figure 10.6-2

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-21

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

Configuration AC Configuration BC

600 610
630
620

590
590
Bulkhead Bulkhead
620 630
600
610

Configuration CC Configuration DC Configuration EC

600
630 610 610

620
590
590 590
Bulkhead
Bulkhead
Bulkhead
610 630 600
600

Loop Clamp to Bulkhead Attachment

Figure 10.6-3

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-22

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

TI-00180BTC.EPS

Configuration BTC

320

330

310

Counterweight
Clamp

Replacement hardware for attaching the wire

harnesses to the terminal strip assembly. This is
supplied with a new terminal strip assembly.
Terminal Strip P/N Split-lock Screw P/N
Washer P/N
1H1150-(2,3) B-3854-40 B-6637-13

Terminal Strip to Counterweight Clamp Attachment

Figure 10.6-4

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-23

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

TI-00180BCC.EPS

Configuration BCC

650

665

660

Counterweight
Clamp

Loop Clamp to Counterweight Clamp Attachment

Figure 10.6-5

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-24

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

Orient the clamp (590) with the terminal

strip (170) as shown.
170

890

Slip Ring Leadwires

590

Spinner Bulkhead

Loop Clamp to Bulkhead Orientation

Figure 10.6-6

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-25

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

Slip Ring Leadwires

890

170

590

Spinner Bulkhead

Orient the clamp (590) with the terminal

strip (170) as shown.

Loop Clamp to Bulkhead Orientation

Figure 10.6-7

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-26

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

Slip Ring Leadwires

170

890

590

Slip Ring Leadwires

590
TI-180006TR
170

890

Orient the clamp (590) with the terminal

strip (170) as shown.

Loop Clamp to Bulkhead Orientation

Figure 10.6-8

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-27

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180
TI-180153

170

Spinner
Bulkhead

TI-180201BBC

590

610

Spinner
Bulkhead
590
600 620 610

Loop Clamp to Bulkhead Orientation

Figure 10.6-9

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-28

Rev. 16 Oct/13
 TI-180158

PROPELLER ICE PROTECTION SYSTEM MANUAL

180

590
Refer to
Figure 10.6-3
170
Refer to Orient Clamp
Figure 10.6-1 C
B
A
(590) to the "A"
and 10.6-2 Terminal as
Shown.
GND

INBD

D
OUTB

Orientation of the Loop Clamp to Terminal Strip on the Bulkhead

Figure 10.6-10

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-29

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

TI-180160

890

590
Refer to
170 Figure 10.6-3
Refer to
Figure 10.6-1
and 10.6-2 Orient Clamp (590) to
the Centerline of the
Terminal Screw as
Shown.

Orientation of the Loop Clamp to Terminal Strip on the Bulkhead

Figure 10.6-11

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-30

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

De-ice Boot

910

De-ice Boot Leadwire

890

Tie Strap (930) Heads

Wire Harness and Tie Strap to Clamp

Figure 10.6-12

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-31

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

910

890

910

930

920

De-ice Boot Blade Clamp Parting Line

De-ice Boot Leadwire

910

890

930 920
920

Wire Harness and Tie Strap to Clamp

Figure 10.6-12 (Continued)

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-32

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

TI-1802001

910

0.25 inch
(6.35 mm)
890 930

Blade
Clamp

1.75 inch
920 (44.45 mm)
1.4 inch
(35.5 mm)
920

Wire Harness and Tie Strap to Clamp

Figure 10.6-13

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-33

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

3.50-3.75 inch
(88.90-95.25 mm)

Indication line - Mark Wire

Harness with Permanent Ink

910

De-ice
Boot
Leadwire

930

590 920 890 920

Indication Line

Wire Harness and Tie Strap to Clamp

Figure 10.6-13 (Continued)

ILLUSTRATED PARTS LIST 30-61-80

TI-1802002
Page 10.6-34
Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

De-ice
Boot
Leadwire

Maximum 890
1.0 inch
(25.4 mm)

920

930

Lubrication Fitting

Wire Harness and Tie Straps to Clamp

Figure 10.6-14

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-35

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

890 910

920

930

The actual location of the de-ice boot leadwires may vary

depending on the installed de-ice boot.

TI-1802008
Wire Harness and Tie Straps to Clamp
Figure 10.6-15

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-36

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

910

0.25 inch
(6.35 mm)
890 930

Blade
Clamp

920

2.18-2.32 inches
(55.37-58.93 mm) 920

TI-1802007

Wire Harness and Tie Straps to Clamp

Figure 10.6-15 (Continued)

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-37

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

TI-1802014
De-ice Boot
Leadwires

920

930

930

De-ice Boot
Leadwires

910

890

Wire Harness and Tie Straps to Clamp

Figure 10.6-16

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-38

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

TI-1802009
Lubrication
Fitting

660
Refer to
Figure 10.6-5

910

920

TI-1802016 930

Lubrication
Fitting

660
Refer to
Figure 10.6-5
De-ice Boot
890
Leadwires

920

930

Plug Connection of De-ice

Boot Leadwires and Wire
Harness (890)

Wire Harness and Tie Straps to Clamp

Figure 10.6-16 (Continued)

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-39

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

TI-1802015

1.0 inch
930 (25.4 mm) Max.

890

930
910

930

910

910

Wire Harness and Tie Straps to Clamp

Figure 10.6-17

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-40

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

1190
1200 1140

1180
1160
Spinner Split
Mounting Plate

1170
1140

1210

1180
Spinner Split
Mounting Plate

Propeller Pitch 1200

1190
Stop

Slip Ring Mounting

Figure 10.6-18

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-41

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

TI-18000144
Spinner 1140
Bulkhead
1200
1210
1200

1160

B-3808-4 Nut

Spinner Mounting 1215

Bracket

Slip Ring Mounting

Figure 10.6-19

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-42

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

Spinner
Mounting
Plate
1140
1200

1160

1190

1180

Spinner Bulkhead

Slip Ring Mounting

Figure 10.6-20

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-43

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

Spinner
Mounting
Plate 1140

1200

1170

1190
1180

Spinner Bulkhead

Slip Ring Mounting

Figure 10.6-21

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-44

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

1140

1200

1155

1190

1200 1180
TI-18000156
Start Lock
Spinner Split
Mounting Plate Spinner Bulkhead

1155 1170

1155

1140

Slip Ring Mounting

Figure 10.6-22

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-45

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

1140
1190
1200

1155

157
1200

1180
Start Lock
Spinner Split
Mounting Plate Spinner Bulkhead

1140
1180
1200

1170 1190

Spinner Split
Mounting Plate
Spinner Bulkhead

Slip Ring Mounting

Figure 10.6-23

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-46

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

Spinner Split
Mounting Plate

1190

1155

1200 1140

1155

1180

1170

Start Lock

Spinner Bulkhead

Slip Ring Mounting

Figure 10.6-24

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-47

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

(This page is intentionally blank.)

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-48

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-5E2691-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-2 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDES ITEM 170A
170A 7931-1E1150-2 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 10 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 10 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION BC
590 B-6735 CLAMP, LOOP, CUSHIONED 5 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 5 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 5 Y
620 B-3837-N832 WASHER, CORROSION RESISTANT 5 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 5 Y

890 4H2369-5 DE-ICE WIRE HARNESS 5 Y

SUPERSEDES ITEM 890A
890 7931-4E2369-5 DE-ICE WIRE HARNESS 5 Y
SUPERSEDED BY ITEM 890
900 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 15 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 10 Y
1140 7931-4E1988-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140A
1140A 4H1988-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140
1170 B-3384-8H BOLT, 1/4-28, HEX HEAD 10 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 10 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 10 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 10 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-49

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-5E2715-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 6 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 6 Y

10.6-.3 LOOP CLAMP HARDWARE

CONFIGURATION CC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 3 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 3 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 3 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 3 Y

890 3H2092-2 WIRE HARNESS 3 Y

SUPERSEDES ITEM 890A
890A 7931-3E2092-2 WIRE HARNESS 3 Y
SUPERSEDED BY ITEM 890
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 3 Y
920 B-3852-5-0 STRAP, TIEDOWN, PLASTIC 6 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 6 Y
1140 4H2551-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E2551-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1170 A-2070-10 SCREW, 1/4-28, BUTTON HEAD 12 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 24 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-50

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-5E2782-1 PROPELLER DE-ICE KIT (ONE PROP)

INSTALLATION INSTRUCTION 10.6-C
10.6-1 TERMINAL STRIP HARDWARE
10.6-2 CONFIGURATION DT
170 1H1150-2 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDES ITEM 170A
170A 7931-1E1150-2 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 8 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 8 Y

10.6-3 CONFIGURATION EC
10.6-7
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 4 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
610 B-3856-246 SCREW, 8-32, HEAD, CRES 4
620 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y

10.6-14
890 4H2369-1 DE-ICE WIRE HARNESS 4 Y
SUPERSEDES ITEM 890A
890A 7931-4E2369-1 DE-ICE WIRE HARNESS 4 Y
SUPERSEDED BY ITEM 890
920 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 12 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 8 Y

10.6-18
1140 7931-4E1964-4 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140A
1140A 4H1964-4 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140
1160 102831 BOLT, 1/4-28, HEX HEAD 4 Y
1170 B-3384-25H BOLT, 1/4-28, HEX HEAD 8 Y
1180 B-7076-42 BELLEVILLE SPRING WASHER 36 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 12
1210 B-3837-0432 WASHER, CORROSION RESISTANT 8

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-51

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-5E2792-1 PROPELLER DE-ICE KIT (ONE PROP)

INSTALLATION INSTRUCTIONS 10.6-C
10.6-1 TERMINAL STRIP HARDWARE
10.6-2 CONFIGURATION DT
170 1H1150-2 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDES ITEM 170A
170A 7931-1E1150-2 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 8 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 8 Y

10.6-3 CONFIGURATION CC
10.6-7
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 4 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
610 B-3856-246 SCREW, 8-32, HEAD, CRES 4
630 B-3837-N832 WASHER, CORROSION RESISTANT 8 Y

10.6-14
890 4H2369-1 DE-ICE WIRE HARNESS 4 Y
SUPERSEDES ITEM 890A
890A 7931-4E2369-11 DE-ICE WIRE HARNESS 4 Y
SUPERSEDED BY ITEM 890
920 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 12 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 8 Y

10.6-18
1140 7931-4E1964-4 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140A
1140A 4H1964-4 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140
1160 102831 BOLT, 1/4-28, HEX HEAD 4 Y
1170 B-3384-25H BOLT, 1/4-28, HEX HEAD 8 Y
1180 B-7076-42 BELLEVILLE SPRING WASHER 36 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 12 Y
1210 B-3837-0432 WASHER, CORROSION RESISTANT 8

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-52

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-5E2796-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 6 Y
220 B-6631-232 SCREW, 6-32, FILLISTER HEAD, CRES 6 Y

10.6-3 CONFIGURATION CC
590 B-6735 CLAMP, LOOP, CUSHIONED 3 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 3 Y
610 B-3866-50 SCREW, 8-32, 100 HEAD, CRES 3 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 3 Y

890 3H2507-1 DE-ICE WIRE HARNESS 3 Y

SUPERSEDES ITEM 890A
890A 7931-3E2507-1 DE-ICE WIRE HARNESS 3 Y
SUPERSEDED BY ITEM 890
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 3 Y
920 B-3852-5-0 STRAP, TIEDOWN, PLASTIC 6 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 6 Y
1140 7931-4E2714-1 SLIP RING ASSEMBLY 1
1160 B-3384-23 BOLT, 1/4-28, HEX HEAD 6 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 6 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 18 Y
1210 B-3837-0463 WASHER, CORROSION RESISTANT 12 Y
1215 B-3855-33 WASHER, LOCK, EXTERNAL TOOTH 6

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-53

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-5E2803-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDED BY ITEM 170A
170A 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDES ITEM 170
200 B-3854-41 WASHER, LOCK 6 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 6 Y

10.6-3 LOOP CLAMP HARDWARE

CONFIGURATION CC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 3 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 3 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 3 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 3 Y

890 7931-3E2092-2 WIRE HARNESS 3 Y

SUPERSEDED BY ITEM 890A
890A 3H2092-2 WIRE HARNESS 3 Y
SUPERSEDES ITEM 890
900 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 9 Y
910 B-3852-5-0 STRAP, TIEDOWN, PLASTIC 6 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 3 Y

1140 7931-4E2551-1 SLIP RING ASSEMBLY 1

SUPERSEDED BY ITEM 1140A
1140A 4H2551-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140
1170 A-2070-9 SCREW, 1/4-28, BUTTON HEAD 3 Y
1170 A-2070-10 SCREW, 1/4-28, BUTTON HEAD 9 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 24 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 12 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-54

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-65-210-1A PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-2 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDES ITEM 170A
170A 7931-1E1150-2 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 8 Y
220 B-6631-232 SCREW, 6-32, FILLISTER HEAD, CRES 8 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION DC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 4 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 4 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y

890 4H2369-1 DE-ICE WIRE HARNESS 4 Y

SUPERSEDES ITEM 890A
890 7931-4E2369-1 DE-ICE WIRE HARNESS 4 Y
SUPERSEDED BY ITEM 890
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 8 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 8 Y
1140 7931-4E1964-3 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140A
1140A 4H1964-3 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140
1160 B-3384-26H BOLT, 1/4-28, HEX HEAD 8
1170 B-3865-15A BOLT, 1/4-28, HEX HEAD, CRES 4 Y
SUPERSEDED BY ITEM 1170A
1170A 102831 BOLT, 1/4-28, HEX HEAD, CRES 4 Y
SUPERSEDES ITEM 1170
1180 B-7076-42 BELLEVILLE SPRING WASHER 36 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1210 B-3837-0463 WASHER, CORROSION RESISTANT 20 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-55

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-65-410-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-2 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDES ITEM 170A
170A 7931-1E1150-2 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 6 Y
220 B-3893-12H SCREW, 6-32, FILLISTER HEAD, CRES 6
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION BC
580 3H1271-1 CLIP, LEAD STRAP 3
SUPERSEDES ITEM 580A
580A 7931-3E1271-1 CLIP, LEAD STRAP 3
SUPERSEDED BY ITEM 580
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 3 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 3 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 3 Y
620 B-3837-N832 WASHER, CORROSION RESISTANT 3 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 3 Y

890 7931-4E2333-1 WIRE HARNESS 3 Y

SUPERSEDED BY ITEM 890A
890A 105235 WIRE HARNESS 3 Y
SUPERSEDES ITEM 890
900 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 9 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 6 Y
1140 7931-4E1526-4 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140A
1140A 4H1526-4 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140
1170 B-3865-13A BOLT, 1/4-28, HEX HEAD, CRES 3
1170 B-3865-16A BOLT, 1/4-28, HEX HEAD, CRES 6
1190 B-6655-04 NUT, HEX, SELF-LOCKING 9
1200 B-3837-0432 WASHER, CORROSION RESISTANT 9 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-56

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-65-470-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-2 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDES ITEM 170A
170A 7931-1E1150-2 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 8 Y
220 B-6631-232 SCREW, 6-32, FILLISTER HEAD, CRES 8 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION DC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 4 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 4 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y

890 4H2369-1 DE-ICE WIRE HARNESS 4 Y

SUPERSEDES ITEM 890A
890 7931-4E2369-1 DE-ICE WIRE HARNESS 4 Y
SUPERSEDED BY ITEM 890
900 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 8 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 8 Y
1140 4H1964-4 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E1964-4 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1160 B-3384-25H BOLT, 1/4-28, HEX HEAD, CRES 8 Y
1170 B-3865-15A BOLT, 1/4-28, HEX HEAD, CRES 4 Y
SUPERSEDED BY ITEM 1170A
1170A 102831 BOLT, 1/4-28, HEX HEAD, CRES 4 Y
SUPERSEDES ITEM 1170
1180 B-7076-42 BELLEVILLE SPRING WASHER 36 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 20 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-57

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-65-470-3 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-2 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDES ITEM 170A
170A 7931-1E1150-2 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 8 Y
220 B-6631-232 SCREW, 6-32, FILLISTER HEAD, CRES 8 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION DC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 4 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 4 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y

890 4H2369-1 DE-ICE WIRE HARNESS 4 Y

SUPERSEDES ITEM 890A
890 7931-4E2369-1 DE-ICE WIRE HARNESS 4 Y
SUPERSEDED BY ITEM 890
900 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 8 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 8 Y
1140 4H1964-4 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E1964-4 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1160 B-3384-25H BOLT, 1/4-28, HEX HEAD, CRES 8 Y
1170 B-3865-15A BOLT, 1/4-28, HEX HEAD, CRES 4 Y
SUPERSEDED BY ITEM 1170A
1170A 102831 BOLT, 1/4-28, HEX HEAD, CRES 4 Y
SUPERSEDES ITEM 1170
1180 B-7076-42 BELLEVILLE SPRING WASHER 36 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 20 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-58

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-050-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 6 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 6 Y
220A B-6631-232 SCREW, 6-32, FILLISTER HEAD, CRES. AR Y
ALTERNATE FOR ITEM 220
NOTE
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION CC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 3 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 3 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 3 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 3 Y

890 3H2092-2 WIRE HARNESS 3 Y

SUPERSEDES ITEM 890A
890A 7931-3E2092-2 WIRE HARNESS 3 Y
SUPERSEDED BY ITEM 890
900 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 6 Y
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 3 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 6 Y
1140 4H2442-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E2442-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1170 A-2070-7 SCREW, 1/4-28, BUTTON HEAD 12 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 12 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 12 Y

NOTE: MINIMUM PREMITTED THREAD ENGAGEMENT IS ONE THREAD BELOW THE END OF THE RIVNUT.

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-59

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-060-2 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDED BY ITEM 170
210 B-3854-41 WASHER, LOCK 8 Y
220 B-6631-231 SCREW, 6-32, FILLISTER HEAD, CRES 8 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION AC
590 B-6735 CLAMP, LOOP, CUSHIONED 4 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 4 Y
620 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y
10.6-4 TERMINAL COUNTERWEIGHT
CONFIGURATION BTC
310 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDES ITEM 170A
310A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDED BY ITEM 170
320 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 8 Y
330 B-3854-41 WASHER, LOCK 8 Y
10.6-5 CLAMP COUNTERWEIGHT
CONFIGURATION BCC
650 B-3856-243 SCREW, 8-32, FILLISTER HEAD, CRES 4 Y
660 B-6735 CLAMP, LOOP, CUSHIONED 4 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y

890 3H2017-8 WIRE HARNESS 4 Y

SUPERSEDES ITEM 890A
890A 7931-3E2017-8 WIRE HARNESS 4 Y
SUPERSEDED BY ITEM 890
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 4 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 4 Y
970 7931-36151 AMP 36151 PIDG RING TERMINAL 8
1140 4H2444-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E2444-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1170 A-2070-10 SCREW, 1/4-28, BUTTON HEAD 12 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 24 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 12 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-60

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-060-4 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 8 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 8 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION AC
590 B-6735 CLAMP, LOOP, CUSHIONED 4 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 4 Y
620 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y

890 3H2092-2 WIRE HARNESS 4 Y

SUPERSEDES ITEM 890A
890A 7931-3E2092-2 WIRE HARNESS 4 Y
SUPERSEDED BY ITEM 890
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 4 Y
920 B-3852-5-0 STRAP, TIEDOWN, PLASTIC 8 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 8 Y
1140 4H2444-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E2444-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1170 A-2070-10 SCREW, 1/4-28, BUTTON HEAD 12 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 24 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-61

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-060-4AL PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 8 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 8 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION AC
590 B-6735 CLAMP, LOOP, CUSHIONED 4 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 4 Y
620 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y

890 3H2092-2 WIRE HARNESS 4 Y

SUPERSEDES ITEM 890A
890A 7931-3E2092-2 WIRE HARNESS 4 Y
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 4 Y
920 B-3852-5-0 STRAP, TIEDOWN, PLASTIC 8 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 8 Y
1140 7931-4E2444-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140A
1140A 4H2444-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140
1170 A-2070-7 SCREW, 1/4-28, BUTTON HEAD 12 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 24 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 12 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-62

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-110-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 8 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 8 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION BC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 4 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 4 Y
620 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y

890 3H2092-2 WIRE HARNESS 4 Y

SUPERSEDES ITEM 890A
890A 7931-3E2092-2 WIRE HARNESS 4 Y
SUPERSEDED BY ITEM 890
900 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 8 Y
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 4 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 8 Y
1140 7931-4E2350-1 SLIP RING ASSEMBLY 1
1155 B-3865-15A BOLT, 1/4-28, HEX HEAD, CRES 4 Y
SUPERSEDED BY ITEM 1155A
1155A 102831 BOLT, 1/4-28, HEX HEAD, CRES 4 Y
SUPERSEDES ITEM 1155
1170 B-3384-26H BOLT, 1/4-28, HEX HEAD 8
1170 B-3865-16A BOLT, 1/4-28, HEX HEAD, CRES 8
1180 B-7077-52 BELLEVILLE SPRING WASHER 36 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 12 Y
1210 B-3837-0463 WASHER, CORROSION RESISTANT 20 Y
1520 B-3865-13A BOLT, 1/4-28, HEX HEAD, CRES 4

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-63

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-245-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDED BY ITEM 170
220 B-6631-231 SCREW, 6-32, FILLISTER HEAD, CRES 10 Y
200 B-3854-41 WASHER, LOCK 10 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION BC
590 B-6735 CLAMP, LOOP, CUSHIONED 5 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 5 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 5 Y
620 B-3837-N832 WASHER, CORROSION RESISTANT 5 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 5 Y
10.6-4 TERMINAL COUNTERWEIGHT
CONFIGURATION BTC
310 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDES ITEM 310A
310A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDED BY ITEM 310
320 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 10 Y
200 B-3854-41 WASHER, LOCK 10 Y
10.6-5 CLAMP COUNTERWEIGHT
CONFIGURATION BCC
650 B-3856-243 SCREW, 8-32, FILLISTER HEAD, CRES 5 Y
660 B-6735 CLAMP, LOOP, CUSHIONED 5 Y
665 B-3837-N832 WASHER, CORROSION RESISTANT 5 Y
840 7931-3E1849-8 TRANSFLEX TUBING 5

890 3H2017-4 WIRE HARNESS 5 Y

SUPERSEDES ITEM 890A
890A 7931-3E2017-4 WIRE HARNESS 5 Y
SUPERSEDED BY ITEM 890
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 5 Y
970 7931-36151 AMP 36151 PIDG RING TERMINAL 10
1140 7931-4E2511 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140A
1140A 4H2511 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140
1170 B-3384-8H BOLT, 1/4-28, HEX HEAD 10 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 10 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 10 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 10 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-64

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-250-2 PROPELLER DE-ICE KIT

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 8 Y
220 B-3892-12H SCREW, 6-32, FILLISTER HEAD, CRES 8
220A B-6631-3-232 SCREW, 6-32, FILLISTER HEAD, CRES, 8
ALTERNATE
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION CC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 4 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
610 B-6976-10 SCREW, 8-32, WASHER HEAD 4 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y

890 3H2092-3 WIRE HARNESS 4 Y

SUPERSEDES ITEM 890A
890A 7931-3E2092-3 WIRE HARNESS 4 Y
SUPERSEDED BY ITEM 890
900 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 8 Y
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 4 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 8 Y
1140 4H2444-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E2444-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1170 A-2070-7 SCREW, 1/4-28, BUTTON HEAD 12 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 12 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 12 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-65

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-265-1 PROPELLER DE-ICE KIT

910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 4 Y

7931-67-265-2 PROPELLER DE-ICE KIT

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 8 Y
220 B-6631-232 SCREW, 6-32, FILLISTER HEAD, CRES 8 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION AC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 4 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
610 B-6976-10 SCREW, 8-32, WASHER HEAD 4 Y
620 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y

890 3H2092-6 WIRE HARNESS 4 Y

SUPERSEDES ITEM 890A
890A 7931-3E2092-6 WIRE HARNESS 4 Y
SUPERSEDED BY ITEM 890
900 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 16 Y
1140 7931-4E2448-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140A
1140A 4H2448-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1155 B-3865-15A BOLT, 1/4-28, HEX HEAD, CRES 4 Y
SUPERSEDED BY ITEM 1155A
1155A 102831 BOLT, 1/4-28, HEX HEAD, CRES 4 Y
SUPERSEDES ITEM 1155
1170 B-3384-26H BOLT, 1/4-28, HEX HEAD 8
1180 B-7076-42 BELLEVILLE SPRING WASHER 36 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1210 B-3837-0463 WASHER, CORROSION RESISTANT 20 Y
1600 7931-3E2179 CONNECTOR BRACKET 4
1610 B-6658-6 SCREW, 10-32, FILLISTER HEAD 8
1640 B-3837-0363 WASHER, CORROSION RESISTANT 8 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-66

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-280-2 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 6 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 6 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION CC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 3 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 3 Y
610 B-6976-10 SCREW, 8-32, WASHER HEAD 3 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 3 Y

890 3H2092-2 WIRE HARNESS 3 Y

SUPERSEDES ITEM 890A
890A 7931-3E2092-2 WIRE HARNESS 3 Y
SUPERSEDED BY ITEM 890
900 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 6 Y
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 3 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 6 Y
1140 4H2442-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E2442-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1170 A-2070-10 SCREW, 1/4-28, BUTTON HEAD 12 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 24 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 12 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-67

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-340-5 PROPELLER DE-ICE KIT

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 8 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 8 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION CC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 4 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
610 B-6976-10 SCREW, 8-32, WASHER HEAD 4 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y

890 3H2092-2 WIRE HARNESS 4 Y

SUPERSEDES ITEM 890A
890A 7931-3E2092-2 WIRE HARNESS 4 Y
SUPERSEDED BY ITEM 890
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 4 Y
920 B-3852-5-0 STRAP, TIEDOWN, PLASTIC 8 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 8 Y
1140 4H3099-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E3099-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1170 A-2070-7 SCREW, 1/4-28, BUTTON HEAD 12 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 24 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 12 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-68

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-440-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 6 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 6 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION CC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 3 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 3 Y
610 B-6976-10 SCREW, 8-32, WASHER HEAD 3 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 3 Y

890 3H2092-2 DE-ICE WIRE HARNESS 3 Y

SUPERSEDES ITEM 890A
890A 7931-3E2092-2 DE-ICE WIRE HARNESS 3 Y
SUPERSEDED BY ITEM 890
920 B-3852-5-0 STRAP, TIEDOWN, PLASTIC 6 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 6 Y
1140 4H2551-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E2551-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1170 A-2070-7 SCREW, 1/4-28, BUTTON HEAD 12 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 24 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 12 Y
1450 B-6655-08 NUT, HEX, SELF-LOCKING 2 Y
1500 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y
1510 7931-3E2259 SPARK GAP BRACKET 3

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-69

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-510-3 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 6 Y
220 B-6631-232 SCREW, 6-32, FILLISTER HEAD, CRES 6 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION CC
590 B-6735 CLAMP, LOOP, CUSHIONED 3 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 3 Y
610 B-3866-50 SCREW, 8-32, 100 HEAD, CRES 3 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 3 Y

890 3H2507-1 DE-ICE WIRE HARNESS 3 Y

SUPERSEDES ITEM 890A
890A 7931-3E2507-1 DE-ICE WIRE HARNESS 3 Y
SUPERSEDED BY ITEM 890
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 3 Y
920 B-3852-5-0 STRAP, TIEDOWN, PLASTIC 6 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 6 Y
1140 7931-4E2714-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140A
1140A 4H2714-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140
1160 B-3384-23 BOLT, 1/4-28, HEX HEAD 6 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 6 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 18 Y
1210 B-3837-0463 WASHER, CORROSION RESISTANT 12 Y
1215 B-3855-33 WASHER, LOCK, EXTERNAL TOOTH 6

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-70

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-570-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 10 Y
220 B-6631-231 SCREW, 6-32, FILLISTER HEAD, CRES 10 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION BC
590 B-6735 CLAMP, LOOP, CUSHIONED 5 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 5 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 5 Y
620 B-3837-N832 WASHER, CORROSION RESISTANT 5 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 5 Y
10.6-4 TERMINAL COUNTERWEIGHT
CONFIGURATION BTC
310 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDES ITEM 310A
310A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDED BY ITEM 310
320 B-6631-232 SCREW, 6-32, FILLISTER HEAD, CRES 10 Y
330 B-3854-41 WASHER, LOCK 10 Y
10.6-5 CLAMP COUNTERWEIGHT
CONFIGURATION BCC
650 B-3856-243 SCREW, 8-32, FILLISTER HEAD, CRES 5 Y
660 B-6735 CLAMP, LOOP, CUSHIONED 5 Y
665 B-3837-N832 WASHER, CORROSION RESISTANT 5 Y

840 7931-3E1849-8 TRANSFLEX TUBING, P/N 3E1849-8 5

890 3H2017-4 WIRE HARNESS 5 Y
SUPERSEDES ITEM 890A
890A 7931-3E2017-4 WIRE HARNESS 5 Y
SUPERSEDED BY ITEM 890
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 5 Y
970 7931-36151 AMP 36151 PIDG RING TERMINAL 10
1140 4H2511 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E2511 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1170 B-3384-7H BOLT, 1/4-28, HEX HEAD 10 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 10 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 10 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 10 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-71

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-610-1 PROPELLER DE-ICE KIT

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 6 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 6 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION CC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 3 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 3 Y
610 B-6976-10 SCREW, 8-32, WASHER HEAD 3 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 3 Y

890 3H2092-2 WIRE HARNESS 3 Y

SUPERSEDES ITEM 890A
890A 7931-3E2092-2 WIRE HARNESS 3 Y
SUPERSEDED BY ITEM 890
900 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 6 Y
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 3 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 6 Y
1140 4H2442-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E2442-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1170 A-2070-7 SCREW, 1/4-28, BUTTON HEAD 12 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 12 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 12 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-72

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-625-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 10 Y
220 B-6631-231 SCREW, 6-32, FILLISTER HEAD, CRES 10 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION BC
590 B-6735 CLAMP, LOOP, CUSHIONED 5 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 5 Y
610 B-3856-247 SCREW, 8-32, FILLISTER HEAD, CRES 5 Y
620 B-3837-N832 WASHER, CORROSION RESISTANT 5 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 5 Y
10.6-4 TERMINAL COUNTERWEIGHT
CONFIGURATION BTC
310 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDES ITEM 310A
310A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDED BY ITEM 310
320 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 10 Y
330 B-3854-41 WASHER, LOCK 10 Y
10.6-5 CLAMP COUNTERWEIGHT
CONFIGURATION BCC
650 B-3856-243 SCREW, 8-32, FILLISTER HEAD, CRES 5 Y
660 B-6735 CLAMP, LOOP, CUSHIONED 5 Y
665 B-3854-42 WASHER, LOCK 5 Y
840 7931-3E1849-8 TRANSFLEX TUBING, P/N 3E1849-8 5

890 3H2017-10 WIRE HARNESS 5 Y

SUPERSEDES ITEM 890A
890A 7931-3E2017-10 WIRE HARNESS 5 Y
SUPERSEDED BY ITEM 890
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 5 Y
970 7931-36151 AMP 36151 PIDG RING TERMINAL 10
1140 4H2863 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E2863 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1170 B-3874-10A BOLT, 1/4-28, HEX HEAD 10 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 10 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 10 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 10 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-73

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-760-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 10 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 10 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION AC
590 B-6735 CLAMP, LOOP, CUSHIONED 5 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 5 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 5 Y
620 B-3837-N832 WASHER, CORROSION RESISTANT 5 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 5 Y

890 3H2092-2 WIRE HARNESS 5 Y

SUPERSEDES ITEM 890A
890A 7931-3E2092-2 WIRE HARNESS 5 Y
SUPERSEDED BY ITEM 890
900 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 15 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 10 Y
1140 4H2511 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E2511 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1170 B-3384-8H BOLT, 1/4-28, HEX HEAD 10 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 10 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 10 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 10 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-74

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-825-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION BT
170 1H1150-2 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDES ITEM 170A
170A 7931-1E1150-2 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDED BY ITEM 170
180 B-6655-06 NUT, HEX, SELF-LOCKING 10 Y
200 B-3854-41 WASHER, LOCK 10 Y
210 B-3854-41 WASHER, LOCK 10 Y
220 B-6631-231 SCREW, 6-32, FILLISTER HEAD, CRES 10 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION BC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 5 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 5 Y
610 B-3856-248 SCREW, 8-32, FILLISTER HEAD, CRES 5 Y
620 B-3837-N832 WASHER, CORROSION RESISTANT 5 Y
630 B-3854-42 WASHER, LOCK 5 Y
10.6-4 TERMINAL COUNTERWEIGHT
CONFIGURATION BTC
310 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDES ITEM 310A
310A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
SUPERSEDED BY ITEM 310
320 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 10 Y
330 B-3854-41 WASHER, LOCK 10 Y
10.6-5 CLAMP COUNTERWEIGHT
CONFIGURATION BCC
650 B-3856-243 SCREW, 8-32, FILLISTER HEAD, CRES 5 Y
660 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 5 Y
665 B-3854-42 WASHER, LOCK 5 Y

890 4H1889-10 DE-ICE WIRE HARNESS 5 Y
SUPERSEDES ITEM 890A
890 7931-4E1889-10 DE-ICE WIRE HARNESS 5 Y
SUPERSEDED BY ITEM 890
900 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 5 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 5 Y
1140 4H3062-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E3062-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-75

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-825-1 PROPELLER DE-ICE KIT (CONTINUED)

1155 B-3384-21H BOLT, 1/4-28, HEX HEAD 5 Y

1170 B-3384-16H BOLT, 1/4-28, HEX HEAD 5 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 10 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 10 Y
1200 B-3851-0463 WASHER 10 Y
1220 B-3837-N616 WASHER, CORROSION RESISTANT 10 Y
1470 B-3854-43 WASHER, LOCK 2
1610 B-3840-12 SCREW, 10-32, FILLISTER HEAD 2 Y
1620 7931-3E2536-1 BRACKET, SYCHROPHASER TARGET 1
1630 B-3808-3 NUT, HEX, SELF-LOCKING 2 Y
1640 B-3837-0332 WASHER, CORROSION RESISTANT 2

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-76

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-830-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 6 Y
220 B-6631-232 SCREW, 6-32, FILLISTER HEAD, CRES 6 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION CC
590 B-6735 CLAMP, LOOP, CUSHIONED 3 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 3 Y
610 B-3866-50 SCREW, 8-32, 100 HEAD, CRES 3 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 3 Y

890 3H2507-1 DE-ICE WIRE HARNESS 3 Y

SUPERSEDES ITEM 890A
890A 7931-3E2507-1 DE-ICE WIRE HARNESS 3 Y
SUPERSEDED BY ITEM 890
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 3 Y
920 B-3852-5-0 STRAP, TIEDOWN, PLASTIC 6 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 6 Y
1140 7931-4E2714-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E2714-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1160 B-3384-23 BOLT, 1/4-28, HEX HEAD 6 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 6 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 18 Y
1210 B-3837-0463 WASHER, CORROSION RESISTANT 12 Y
1215 B-3855-33 WASHER, LOCK, EXTERNAL TOOTH 6

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-77

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-920-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 6 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 6 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION CC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 3 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 3 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 3 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 3 Y

890 3H2092-2 WIRE HARNESS 3 Y

SUPERSEDES ITEM 890A
890A 7931-3E2092-2 WIRE HARNESS 3 Y
SUPERSEDED BY ITEM 890
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 3 Y
920 B-3852-5-0 STRAP, TIEDOWN, PLASTIC 6 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 6 Y
1140 4H2551-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E2551-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1170 A-2070-10 SCREW, 1/4-28, BUTTON HEAD 12 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 24 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 12 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-78

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-929-1 PROPELLER DE-ICE KIT (ONE PROP)

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION ET
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDES ITEM 170A
170A 7931-1E1150-3 TERMINAL STRIP, E.P.D. SYSTEM 4
SUPERSEDED BY ITEM 170
200 B-3854-41 WASHER, LOCK 8 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 8 Y
230 B-3854-41 WASHER, LOCK 8 Y
10.6-3 LOOP CLAMP HARDWARE
CONFIGURATION AC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 4 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
610 B-6976-10 SCREW, 8-32, WASHER HEAD 4 Y
620 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 4 Y

890 3H2092-2 WIRE HARNESS 4 Y
SUPERSEDES ITEM 890A
890A 7931-3E2092-2 WIRE HARNESS 4 Y
SUPERSEDED BY ITEM 890
900 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 8 Y
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 4 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 8 Y
1140 4H2448-1 SLIP RING ASSEMBLY 1
SUPERSEDES ITEM 1140A
1140A 7931-4E2448-1 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1155 B-3865-15A BOLT, 1/4-28, HEX HEAD, CRES 4 Y
SUPERSEDED BY ITEM 1155A
1155A 102831 BOLT, 1/4-28, HEX HEAD, CRES 4 Y
SUPERSEDES ITEM 1155
1160 B-3384-26H BOLT, 1/4-28, HEX HEAD 8
1180 B-7076-42 BELLEVILLE SPRING WASHER 36 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0463 WASHER, CORROSION RESISTANT 20 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-79

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

102195-1 PROPELLER DE-ICE KIT (ONE PROP)

INSTALLATION INSTRUCTION 10.6-A

10.6-1 TERMINAL STRIP HARDWARE

10.6-2 CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 5
200 B-3854-41 WASHER, LOCK 10 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 10 Y

10.6-3 LOOP CLAMP HARDWARE

10.6-6 CONFIGURATION BC
590 B-6735 CLAMP, LOOP, CUSHIONED 5 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 5 Y
610 B-3856-246 SCREW, 8-32, WASHER HEAD 5
620 B-3837-N832 WASHER, CORROSION RESISTANT 5 Y
630 B-3854-42 WASHER, CORROSION RESISTANT 5 Y

10.6-12
890 3H2092-2 WIRE HARNESS 5 Y
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 5 Y
920 B-3852-5-0 STRAP, TIEDOWN, PLASTIC 15 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 10 Y

10.6-20
1140 4H2511 SLIP RING ASSEMBLY 1
1160 B-3384-8H BOLT, 1/4-28, HEX HEAD 10
1180 B-7077-52 BELLEVILLE SPRING WASHER 10 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 10 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 10 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-80

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

102655-1 PROPELLER DE-ICE KIT (ONE PROP)

INSTALLATION INSTRUCTION 10.6-B
10.6-1
10.6-2 TERMINAL STRIP HARDWARE
10.6-9 CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
200 B-3854-41 WASHER, LOCK 6 Y
220 B-6631-232 SCREW, 6-32, FILLISTER HEAD, CRES 6 Y

10.6-9 LOOP CLAMP HARDWARE

590 B-6735 CLAMP, LOOP, CUSHIONED 3 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 3 Y
610 B-3866-50 SCREW, 8-32, WASHER HEAD 3 Y
620 B-3837-N832 WASHER, CORROSION RESISTANT 3 Y

10.6-13
890 3H2507-1 WIRE HARNESS 3 Y
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 3 Y
920 B-3852-5-0 STRAP, TIEDOWN, PLASTIC 6 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 6 Y

10.6-19
1140 4H2714-1 SLIP RING ASSEMBLY 1
1160 B-3384-23 BOLT, 1/4-28, HEX HEAD 6
1200 B-3837-0432 WASHER, CORROSION RESISTANT 18 Y
1210 B-3837-0463 WASHER, CORROSION RESISTANT 12 Y
1215 B-3855-33 WASHER, EXTERNAL, LOCK 6 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-81

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

104116 PROPELLER DE-ICE KIT (ONE PROP)

INSTALLATION INSTRUCTION 10.6-D

10.6-1 TERMINAL STRIP HARDWARE

10.6-2 CONFIGURATION DT
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
200 B-3854-41 WASHER, LOCK 6 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 6 Y

10.6-3 LOOP CLAMP HARDWARE

10.6-8 CONFIGURATION CC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 3 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 3 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 3 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 3 Y

10.6-15
890 3H2092-2 WIRE HARNESS 3 Y
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 3 Y
920 B-3852-5-0 STRAP, TIEDOWN, PLASTIC 6 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 6 Y

10.6-21
1140 4H2551-1 SLIP RING ASSEMBLY 1
1170 A-2070-7 SCREW, 1/4-28, BUTTON HEAD 12 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 24 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 12 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-82

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

104251 PROPELLER DE-ICE KIT (ONE PROP)

INSTALLATION INSTRUCTION 10.6-E

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-2 TERMINAL STRIP, E.P.D. SYSTEM 5
200 B-3854-41 WASHER, LOCK 10 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 10 Y

10.6-3 LOOP CLAMP HARDWARE TO BULKHEAD

10.6-10 CONFIGURATION AC
590 B-6735 CLAMP, LOOP, CUSHIONED 5 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 5 Y
610 B-3856-247 SCREW, 8-32, FILLISTER HEAD, CRES 5 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 10 Y

10.6-5 LOOP CLAMP HARDWARE TO COUNTERWEIGHT

10.6-16 CONFIGURATION BCC
650 B-3856-243 SCREW, 8-32, FILLISTER HEAD, CRES 5 Y
660 B-6735 CLAMP, LOOP, CUSHIONED 5 Y
665 B-3854-42 WASHER, LOCK 5 Y

10.6-2
10.6-10
890 104240 WIRE HARNESS 5 Y
910 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 5 Y
920 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 10 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 10 Y

10.6-22
1140 104249 SLIP RING ASSEMBLY 1
1155 B-3384-21H BOLT, 1/4-28, HEX HEAD 5 Y
1170 B-3384-16H BOLT, 1/4-28, HEX HEAD 5 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 10 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 10 Y
1200 B-3837-0463 WASHER, CORROSION RESISTANT 20 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-83

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

104334-1 PROPELLER DE-ICE KIT (ONE PROP)

INSTALLATION INSTRUCTION 10.6-F

10.6-1 TERMINAL STRIP HARDWARE

CONFIGURATION DT
170 1H1150-2 TERMINAL STRIP, E.P.D. SYSTEM 4
200 B-3854-41 WASHER, LOCK 8 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 8 Y

10.6-3 LOOP CLAMP HARDWARE TO BULKHEAD

10.6-11 CONFIGURATION BC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 4 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 4 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 8 Y

10.6-2
10.6-17
890 104335 WIRE HARNESS 4 Y
890A 4H2369-1 WIRE HARNESS, ALTERNATE 4 Y
910 B-3852-1-0 STRAP, TIEDOWN, PLASTIC 12 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 12 Y

10.6-23
1140 4H1964-4 SLIP RING ASSEMBLY 1
1155 B-3384-25H BOLT, 1/4-28, HEX HEAD 8 Y
1170 102831 BOLT, 1/4-28, HEX HEAD 4 Y
1180 B-7076-42 BELLEVILLE SPRING WASHER 36 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 20 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-84

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

105339 PROPELLER DE-ICE KIT (ONE PROP)

INSTALLATION INSTRUCTION 10.6-G

10.6-1 TERMINAL STRIP HARDWARE

10.6-2 CONFIGURATION DT
TYPICAL TWO WIRE INSTALLATION
170 1H1150-3 TERMINAL STRIP, E.P.D. SYSTEM 3
200 B-3854-41 WASHER, LOCK 6 Y
220 B-6631-233 SCREW, 6-32, FILLISTER HEAD, CRES 6 Y

10.6-3 LOOP CLAMP HARDWARE

10.6-6 CONFIGURATION CC
590 B-3857-WDG4 CLAMP, LOOP, CUSHIONED 3 Y
600 B-6655-08 NUT, HEX, SELF-LOCKING 3 Y
610 B-3856-246 SCREW, 8-32, FILLISTER HEAD, CRES 3 Y
630 B-3837-N832 WASHER, CORROSION RESISTANT 3 Y

10.6-15
890 3H2092-2 WIRE HARNESS 3 Y
910 B-3852-2-0 STRAP, TIEDOWN, PLASTIC 3 Y
920 B-3852-5-0 STRAP, TIEDOWN, PLASTIC 6 Y
930 B-3852-6-0 STRAP, TIEDOWN, PLASTIC 6 Y

10.6-24
1140 4H2551-1 SLIP RING ASSEMBLY 1
1155 A-2070-10 SCREW, 1/4-28, BUTTON HEAD 9 Y
1170 A-2070-9 SCREW, 1/4-28, BUTTON HEAD 3 Y
1180 B-7077-52 BELLEVILLE SPRING WASHER 24 Y
1190 B-3808-4 NUT, HEX, SELF-LOCKING 12 Y
1200 B-3837-0432 WASHER, CORROSION RESISTANT 12 Y

- ITEM NOT ILLUSTRATED

De-ice Kits for Steel Hub Turbine Propeller with Quick Disconnect

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-85

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

(This page is intentionally blank.)

ILLUSTRATED PARTS LIST 30-61-80 Page 10.6-86

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

Kit Part Number Vendor Approved Installation

Instructions
7931-5E2647-2 Goodrich Corporation 5E2647 Rev. H
7931-5E2682-2 Goodrich Corporation 5E2682 Rev. D
7931-5E2707-2 Goodrich Corporation 5E2707 Rev. D
7931-5E2715-2 Goodrich Corporation 5E2715 Rev. J
7931-5E2793-4 Hartzell Propeller Inc. 5E2793 Rev. C
7931-65-600-2 Goodrich Corporation 7E1784 Rev. D
7931-65-600-5 Goodrich Corporation 7E1784 Rev. D
7931-67-195 Goodrich Corporation 7E1431 Rev. L
7931-67-750-2 Goodrich Corporation 7E1761 Rev. C
7931-67-805-2 Goodrich Corporation 7E1772 Rev. B
7931-67-815-2 Goodrich Corporation 7E1776 Rev. F
7931-67-825-2 Goodrich Corporation 7E1778 Rev. G
7931-67-825-3 Goodrich Corporation 7E1778 Rev. G
7931-67-931-2 Goodrich Corporation 5E2620 Rev. E
7931-67-940-2 Goodrich Corporation 5E2662 Rev. H
7931-67-940-3 Goodrich Corporation 5E2662 Rev. H
7931-67-941-2 Goodrich Corporation 5E2663 Rev. L
7931-67-942-2 Goodrich Corporation 5E2664 Rev. C
102014-2 Hartzell Propeller Inc. Per Malibu Power and Propeller, Int'l
Instructions
102014-3 Hartzell Propeller Inc. Per Malibu Power and Propeller, Int'l
Instructions
102014-4 Hartzell Propeller Inc. Per Malibu Power and Propeller, Int'l
Instructions
102014-5 Hartzell Propeller Inc. Per Airframe Manufacturer's
Instructions
102195-2 Hartzell Propeller Inc. Per Airframe Manufacturer's
Instructions
102544-2 Hartzell Propeller Inc. Installation Instruction 10.12-B,
Figures 10.12, 10.12-5
102544-3 Hartzell Propeller Inc. Installation Instruction 10.12-A,
Figures 10.12 and
10.12-2, 10.12-5
102600-2 Hartzell Propeller Inc. Installation Instruction 10.12-E,
Figures 10.12-6 and
10.12-7
102960-2 Hartzell Propeller Inc. Installation Instructions 10.12-C,
Figures 10.12-4

Airframe Kits and Approved Installation Instructions

Table 10.12-1

ILLUSTRATED PARTS LIST 30-61-80 Page 10.12-3

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

Kit Part Number Vendor Approved Installation

Instructions
102998-2 Hartzell Propeller Inc. Installation Instruction 10.12-D,
Figures 10.12-1, 10.12-3, and 10.12-5
102998-3 Hartzell Propeller Inc. Figure 10.8-4
103294-4 Hartzell Propeller Inc. Installation Instruction 10.12-F,
Figures 10.12-8 and
10.12-9
103294-5 Hartzell Propeller Inc. Installation Instruction 10.12-F,
Figures 10.12-8 and
10.12-9
103307 Hartzell Propeller Inc. Installation Instruction 10.12-D,
Figures 10.12-1, 10.12-3, and 10.12-5
103308 Hartzell Propeller Inc. Figure 10.8-4
103643 Hartzell Propeller Inc. Per Aircraft TC Holder's ICA
103644 Hartzell Propeller Inc. Per Blackhawk Modifications Inc. In-
structions
103652 Hartzell Propeller Inc. Installation Instruction 10.12-G,
Figures 10.12-10
104009 Hartzell Propeller Inc. Per Smryna Air Center
Instructions
104128 Hartzell Propeller Inc. Per Pacific Aerospace
Instructions
104181 Hartzell Propeller Inc. Installation Instruction 10.12-H,
Figures 10.12-1 and 10.12-5
104252 Hartzell Propeller Inc. Per Aircraft TC Holder's ICA
104265 Hartzell Propeller Inc. Per Aircraft TC Holder's ICA
104268 Hartzell Propeller Inc. Per Aircraft TC Holder's ICA
104430 Hartzell Propeller Inc. Per Aircraft TC Holder's ICA
104958 Hartzell Propeller Inc. Per Aircraft TC Holder's ICA
105068 Hartzell Propeller Inc. Per Aircraft TC or STC Holder's ICA
105287 Hartzell Propeller Inc. Per Aircraft TC or STC Holder's ICA

Airframe Kits and Approved Installation Instructions

Table 10.12-1 (Continued)

ILLUSTRATED PARTS LIST 30-61-80 Page 10.12-4

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-65-600-2 AIRFRAME DE-ICE KIT

1220 7931-3E1872-2 AMMETER, 14-18 AMPS 1

1220A 3H1872-2 AMMETER, 14-18 AMPS 1
ALTERNATE
1560 7931-3E1150-10 TIMER 1
2010 3H2042-1 MODULAR BRUSH BLOCK ASSY. 2
2010A 7931-3E2042-1 MODULAR BRUSH BLOCK ASSY. 2
ALTERNATE
2015 1H1157 SHIM, BRUSH BLOCK ASSY 2
2015A 7931-1E1157 SHIM, BRUSH BLOCK ASSY, ALTERNATE 2
2500 3H1461 BRACKET, MOUNTING, BRUSH BLOCK 2
2500A 7931-3E1461 BRACKET, MOUNTING, BRUSH BLOCK, 2
ALTERNATE
2515 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
2520 B-3837-N832 WASHER, CORROSION RESISTANT 8 Y
2525 B-6637-52 SCREW, PAN HEAD, CRES 4
2530 7931-1E1297 SPACER 8
2610 B-3875-25A BOLT, 5/16-24, HEX HEAD 4
3000 7931-91586-1 MS91586-1 AMMETER SHUNT 30 AMP 1
3025 7931-1E1110-1 SWITCH, CIRCUIT BREAKER 20 AMPS 1
3030 1H1111 SWITCH, FACE PLATE 1
3030A 7931-1E1111 SWITCH, FACE PLATE, ALTERNATE 1
3040 7931-3106F2015S MS3106F20-15S CONNECTOR 1
3065 7931-1E1211 SPACER, E.P.D. SYSTEM (CE-320) 8
3065A 1H1211 SPACER, E.P.D. SYSTEM (CE-320) 8
ALTERNATE
3090 7931-35058-22 MS35058-22 SWITCH 1

- ITEM NOT ILLUSTRATED

Airframe Kits

ILLUSTRATED PARTS LIST 30-61-80 Page 10.12-29

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-65-600-5 AIRFRAME DE-ICE KIT

1220 7931-3E1872-2 AMMETER, 14-18 AMPS 1

1220A 3H1872-2 AMMETER, 14-18 AMPS 1
ALTERNATE
1560 7931-3E1150-10 TIMER 1
2010 3H2042-2 MODULAR BRUSH BLOCK ASSY. 2
2010A 7931-3E2042-2 MODULAR BRUSH BLOCK ASSY, 2
ALTERNATE
2015 1H1157 SHIM, BRUSH BLOCK ASSEMBLY 2
2015A 7931-1E1157 SHIM, BRUSH BLOCK ASSY, ALTERNATE 2
2500 3H2581-2 BRACKET, BRUSH BLOCK ASSEMBLY 2
2500A 7931-3E2581-2 BRACKET, BRUSH BLOCK ASSEMBLY, 2
ALTERNATE
2515 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
2520 B-3837-N832 WASHER, CORROSION RESISTANT 8 Y
2525 B-6637-52 SCREW, PAN HEAD, CRES 4
2530 7931-1E1297 SPACER 8
2610 B-3875-24A BOLT, 5/16-24, HEX HEAD 4
3000 7931-91586-1 MS91586-1 AMMETER SHUNT 30 AMP 1
3025 7931-1E1110-1 SWITCH, CIRCUIT BREAKER 20 AMPS 1
3030 1H1111 SWITCH, FACE PLATE 1
3030A 7931-1E1111 SWITCH, FACE PLATE, ALTERNATE 1
3040 7931-3106F2015S MS3106F20-15S CONNECTOR 1
3065 1H1211 SPACER, E.P.D. SYSTEM (CE-320) 8
3065A 7931-1E1211 SPACER, E.P.D. SYSTEM (CE-320) 8
ALTERNATE
3090 7931-35058-22 MS35058-22 SWITCH 1

- ITEM NOT ILLUSTRATED

Airframe Kits

ILLUSTRATED PARTS LIST 30-61-80 Page 10.12-30

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-195 AIRFRAME DE-ICE KIT

1220 3H1389-7 AMMETER, 29-33 AMPS 1

1220A 7931-3E1389-7 AMMETER, 29-33 AMPS, ALTERNATE 1
1560 7931-3E1964-3 TIMER, DE-ICE 1
2010 3H2062-2 MODULAR BRUSH BLOCK ASSEMBLY 2
2010A 7931-3E2062-2 MODULAR BRUSH BLOCK ASSEMBLY, 2
ALTERNATE
2015 1H1157 SHIM, BRUSH BLOCK ASSY 2
2015A 7931-1E1157 SHIM, BRUSH BLOCK ASSY, ALTERNATE 2
2500 7931-4E2032 DE-ICE MOUNTING BRACKET 2
2515 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
2520 B-3837-N832 WASHER, CORROSION RESISTANT 8 Y
2525 B-6637-50 SCREW, PAN HEAD, CRES 4
2610 B-3874-42A BOLT, 1/4-28, HEX HEAD 2
3000 7931-91586-2 MS91586-2 AMMETER SHUNT 50 AMP 1
3020 7931-454-724 454-724 CIRCUIT BREAKER, 35 AMP 1
3050 7931-3E1935 SUPPORT ARM ASSEMBLY 2
3060 7931-32370-11 32370-11 ILLUM. ROCKER SWITC 1

- ITEM NOT ILLUSTRATED

Airframe Kits

ILLUSTRATED PARTS LIST 30-61-80 Page 10.12-31

Rev. 9 Jul/10
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-750-2 AIRFRAME DE-ICE KIT

1140 4H2267-2 SLIP RING ASSEMBLY 1

SUPERSEDES ITEM 1140A
1140A 7931-4E2267-2 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1190 7931-21045-4 MS21045-4 SELF LOCKING NUT 6
1200 B-3837-0432 WASHER, CORROSION RESISTANT 6 Y
1215 B-7077-52 BELLEVILLE SPRING WASHER 6 Y
1350 B-3384-8H BOLT, 1/4-28, HEX HEAD 6 Y
3000 7931-3E1872-2 AMMETER, 14-18 AMPS 1
3000A 3H1872-2 AMMETER, 14-18 AMPS 1
ALTERNATE

- ITEM NOT ILLUSTRATED

Airframe Kits

ILLUSTRATED PARTS LIST 30-61-80 Page 10.12-32

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-805-2 AIRFRAME DE-ICE KIT

1140 4H2459-2 SLIP RING ASSEMBLY 1

SUPERSEDES ITEM 1140A
1140A 7931-4E2459-2 SLIP RING ASSEMBLY 1
SUPERSEDED BY ITEM 1140
1190 7931-21045-4 MS21045-4 SELF LOCKING NUT 6
1200 B-3837-0432 WASHER, CORROSION RESISTANT 6 Y
1215 B-7077-52 BELLEVILLE SPRING WASHER 6 Y
1350 B-3384-8H BOLT, 1/4-28, HEX HEAD 6 Y
3000 7931-3E1872-2 AMMETER, 14-18 AMPS 1
3000A 3H1872-2 AMMETER, 14-18 AMPS 1
ALTERNATE

- ITEM NOT ILLUSTRATED

Airframe Kits

ILLUSTRATED PARTS LIST 30-61-80 Page 10.12-33

Rev. 16 Oct/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

7931-67-815-2 AIRFRAME DE-ICE KIT

1220 7931-3E1872-3 AMMETER, 17-21 AMPS 1

SUPERSEDED BY ITEM 1220A
1220A 3H1872-3 AMMETER, 17-21 AMPS 1
SUPERSEDES ITEM 1220
1560 7931-3E1964-3 TIMER, DE-ICE 1
2010 3H2090-2 MODULAR BRUSH BLOCK ASSEMBLY 1
2010A 7931-3E2090-2 MODULAR BRUSH BLOCK ASSEMBLY,
ALTERNATE 1
2015 1H1157 SHIM, BRUSH BLOCK ASSY 2
2015A 7931-1E1157 SHIM, BRUSH BLOCK ASSY, ALTERNATE 2
2500 3H2223 MOUNTING BRACKET 2
2500A 7931-3E2223 MOUNTING BRACKET, ALTERNATE 2
2515 B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
2520 B-3837-N832 WASHER, CORROSION RESISTANT 8 Y
2525 B-6637-50 SCREW, PAN HEAD, CRES 4
3000 7931-91586-1 MS91586-1 AMMETER SHUNT 30 AMP 1
3025 7931-2E1900-1 SWITCH; CIRCUIT BREAKER 1
SUPERSEDED BY ITEM 3025A
3025A 2H1900-1 SWITCH, CIRCUIT BREAKER 1
SUPERSEDES ITEM 3025

- ITEM NOT ILLUSTRATED

Airframe Kits

ILLUSTRATED PARTS LIST 30-61-80 Page 10.12-34

Rev. 11 Jun/11
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

104268 AIRFRAME DE-ICE KIT

4H3153 MOUNTING PLATE, SPLIT 2
4H2459-2 SLIP RING ASSEMBLY 1
B-7077-52 BELLEVILLE SPRING WASHER 6 Y
B-3808-4 NUT, HEX, SELF-LOCKING 6
3H2042-1 MODULAR BRUSH BLOCK ASSEMBLY 1
1H1157 SHIM, BRUSH BLOCK ASSY 2
B-6655-08 NUT, HEX, SELF-LOCKING 2 Y
B-3837-N832 WASHER, CORROSION RESISTANT 4 Y
B-6637-52 SCREW, PAN HEAD, CRES 2
B-3837-0432 WASHER, CORROSION RESISTANT 6 Y
B-3384-7H BOLT, 1/4-28, HEX HEAD 6
104277 BRUSH BLOCK BRACKET 1

104430 AIRFRAME DE-ICE KIT

3H2237 BRACKET, MOUNTING, BRUSH BLOCK 1

3H2090-1 MODULAR BRUSH BLOCK ASSEMBLY 1
1H1157 SHIM, BRUSH BLOCK ASSY 1
B-6655-08 NUT, HEX, SELF-LOCKING 2 Y
B-3837-N832 WASHER, CORROSION RESISTANT 4 Y
B-6637-50 SCREW, PAN HEAD, CRES 2

- ITEM NOT ILLUSTRATED

Airframe Kits

ILLUSTRATED PARTS LIST 30-61-80 Page 10.12-59

Rev. 14 Jan/13
 PROPELLER ICE PROTECTION SYSTEM MANUAL
180

FIG./ITEM PART DESCRIPTION UPA O/H

NUMBER NUMBER

104958 AIRFRAME DE-ICE KIT

3H2044-3 MODULAR BRUSH BLOCK ASSEMBLY 1
B-6637-52 SCREW, PAN HEAD, CRESCENT 2
B-3837-N832 WASHER, CORROSION RESISTANT 4 Y
B-6655-08 NUT, SELF-LOCKING 2

105068 AIRFRAME DE-ICE KIT

105065 BRACKET, MOUNTING, BRUSH BLOCK 1

105404 MODULAR BRUSH BLOCK ASSEMBLY 1
105069 MOV MODULE - ASSEMBLY 1
105070 BRACKET, MOV 1
B-6637-52 SCREW, PAN HEAD, CRES. 4
B-3837-N832 WASHER, CORROSION RESISTANT 6 Y
B-3855-31 WASHER, LOCK, EXTERNAL TOOTH 2 Y
B-6655-08 NUT, HEX, SELF-LOCKING 4 Y
1H1157 SHIM, BRUSH BLOCK 1

105287 AIRFRAME DE-ICE KIT

105228 BRACKET, MOUNTING, BRUSH BLOCK 1

3H2044-3 MODULAR BRUSH BLOCK ASSEMBLY 1
102395 ELECTRICAL CONNECTOR 1
102337 TIMER/MONITOR, DE-ICE 1
B-6637-52 SCREW, PAN HEAD, CRES. 2
B-3837-N832 WASHER, CRESCENT 4 Y
B-6655-08 NUT, HEX, SELF-LOCKING 2 Y
1H1157 SHIM, BRUSH BLOCK 1

- ITEM NOT ILLUSTRATED

Airframe Kits

ILLUSTRATED PARTS LIST 30-61-80 Page 10.12-60

Rev. 16 Oct/13