Founded in 1945, Weller has become the

world's leading supplier of professional

quality soldering equipment, including the
famous Weller temperature controlled irons
and soldering guns. Weller makes advanced
soldering and desoldering stations and irons
for sophisticated industrial needs, plus a
series of handy soldering and miniature
power tool kits for home craftsmen, hobbyists
and light industry.

WMD3K2
WMD3K2 multi digital
desoldering station
with soldering irons

WQB4000SOPS WMD1A & Multi Purpose Station

BGA & QFP
Rework Station

WD1000AU
WD1 digital soldering station with
WP80 soldering iron
e - denotes USA/Germany stock requiring freight lead times. 2
Product depictions are not to scale. “Broken shelf packs attract a 5% Surcharge”
 SOLDERING STATIONS

Magnastat Controlled Station

The Weller Magnastat system operates through a ferro-magnetic sensing device which changes its characteristics when a specific temperature is reached. This causes
it to either attract or repel a permanent magnet which operates a power supply switch. In this way power to the heating element can be quickly switched on or off
to either provide extra power for soldering operations or reduced power when idling. Working temperature selection is achieved by simply changing the ‘temperature
sensing’ soldering tip. These are available in temperature ratings of 315°C, 371°C and 427°C. The tips are made of pure copper for effective heat conductivity. The
heating element has an optimal heating effect on the tip. This is possible through high precision of the tubes, the winding and insulation, which means that the heating
element should never be gripped with pliers or be hammered in any way. It is quite sufficient to secure the soldering tip by tightening it into the tip sleeve by hand
(when the iron is cold).

Temperature sensing Device Power Switch

Tip Permanent Power Supply

Magnet

Description Material No. Shelf

Pack
WTCPTD WTCPTD 1
Soldering station consists of:
• TC202DT2 230V Power Unit
• TC201B 42 Watt 24V Pencil
• PH1201 Stand
• 1.6mm 700°F/371°C tip
Soldering Tips: PT-Series see page 24

Temperature Controlled Stations

WHS40 T0056806599 1
Soldering Station - 40W/230V
• The temperature range can be
controlled between 200°C and 450°C
• The WHS40 soldering station from
Weller rules out the risk of temperature
shocks which can occur with
conventional soldering bits.
• Desired temperatures can be set
precisely in such a way that you no
longer have to worry about overheating
sensitive areas.
• Consists of power unit, soldering
iron with nickel plated 2.00mm tip and
support.

WHS40D T0056828599 1
Soldering Station - 40W/230V - Digital
• 2mm straight nickel tip
• The new electronically controlled
soldering station WHS40D operates
with a temperature range of 150°C -
450°C.
• The precise soldering tip temperature
shows on the digital read-out (pre-set
and real value).
• This soldering station is suitable for
delicate soldering tasks on temperature
sensitive components.
• LED to monitor the heater is integrated
in the display.
• The temperature adjusts via buttons.
• Consists of power unit, soldering iron
with “Longlife” tip 2.0mm and support.

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 3
 SOLDERING STATIONS

Electronically Controlled Stations

The Weller WES51D and WESD51D have been developed to provide precision electronic soldering at an affordable price.
The tip temperature is electronically controlled and is within a tolerance of +/- 3%

Description Material No. Shelf

Pack
WES51D WES51D 1
An economical soldering station with High-
End Performance. Ideal for continuous
production soldering.
• Analogue temperature control
ESD SAFE
• Temperature lockout
• Automatic shut off
• Slim comfortable pencil reduced operator
fatigue
• Temperature range 150°C-450°C
• Max. power output 50W
• Assembled in Australia
Soldering station consists of:
• WES51DPU 230V Power Unit
• PES51 50 Watt 24V Pencil
• PH50 Holder
• ETA tip
Soldering Tips: ET-Series see page 25

WESD51DAU WESD51DAU 1
Ideal for production, rework and repair of
through hole SMT boards, some ground
planes and multi-layer boards.
• Digital microprocessor temperature control
with LED display ESD SAFE

• Wireless temperature lockout tool

• Automatic shut off
• Tip temperature offset
• °C-°F switchable
• Temperature range 150°C-450°C
• Max. power output 50W
• Assembled in Australia
Soldering station consists of:
• wesd51dpu 230V Power Unit
• PES51 50 Watt 24V Pencil
• PH50 Holder
• ETA tip

WD1AU WD1AU 1
80W Power Unit with Digital Display - Single
port
• 3 “radio buttons” allows to pre-set
frequently used temperature settings
• Extensive Special Functions menu ESD SAFE
allows you to utilize access features
• Setback, lockout, temp. window, F/C
switching, standby, auto-off time
• Large high contrast LCD display
displays more information at a glance
• Compatible with WP80 and WMP
soldering pencils
• ESD safe to protect sensitive
components
• ROHS & WEEE Compliant

WD1MAU WD1MAU 1
80W High Performance Power Unit - Single
port
• 3 “radio buttons” allows to pre-set
frequently used temperature settings
• Extensive Special Functions menu
allows you to utilize access features ESD SAFE

• Setback, lockout, temp. window, F/C

switching, standby, auto-off time
• Large high contrast LCD display
displays more information ­at a glance
• Compatible with WP80, WMP, WMRT
and WMRP soldering pencils
• ESD safe to protect sensitive
components
• USB Interface & Software
• ROHS & WEEE Compliant

4 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 SOLDERING STATIONS

Electronically Controlled Stations (cont’d)

Description Material No. Shelf
Pack

WD1000AU WD1000AU 1
A new concept in soldering iron design.
• Digital temperature control
• Temperature lockout
• Automatic shut off
• Unique miniature pencil ESD SAFE

• 3 Pre-set temperature buttons

• °C-°F switchable
• Temperature range 50°C-450°C
• Max. power output 80W
• Made in Germany
Soldering station consists of:
• WD1 230V Power Unit
• WP80 80 Watt 24V Pencil
• WDH10 Holder
• LTB tip
• ROHS & WEEE Compliant

WD1001AU WD1001AU 1
• Similar to WD1000AU with WMP
soldering tool and WDH20 holder.

ESD SAFE

WD1000MAU WD1000MAU 1
Micro Digital Rework Soldering Station,
• Designed for fine pitch, high density
SMT soldering and rework
• 3 “radio buttons” allows pre-set of
frequently used temp settings
• Setback, lockout, temp. window, F/C ESD SAFE
switching, standby, auto-off time
• Large high contrast LCD display
displays more information at a glance
• The heating element is contained in the
tip for fast heat-up
• WMRP Pencil is made of aluminum
with chrome plating and weighs just 75g
• The pencil powers down when placed
in the holder to extend tip life
• The “tip to grip” distance is 45mm,
placing you close to the work
• The antistatic design of the safety rest
has got four different settings
• ESD safe to protect sensitive
components
• ROHS & WEEE Compliant
• Max. Power Output 80W; Consists of
WMRP 40W Micro Soldering Pencils
with RT3 Tip and WDH50 Holder
WD1000HPT WD1000HPTAU 1
W The WD 1000HPT station features Weller’s
NE new 120 W soldering iron, the WP 120. This
iron is ideal for soldering on difficult circuit
boards with heat sinks that cause dissipation
in heat transfer. Target applications include
high density circuit boards, High Frequency / ESD SAFE
Radio Frequency applications, and solar panel
production.
The Weller WD1000HPT station is specifically
designed for soldering operations which need
a combination of high energy and maximum
precision.
The WD1000 HPT consists of-
• The WD120 Soldering Iron
XT Series Tips, refer page 29
• The WD1M Power Unit
• WDH10T Stop + Go Iron Safety Rest
• Dimensions (L x W x H mm):
134 x 108 x 147
• Mains voltage supply: 230V / 120V /
50/60 Hz
• Power: 160W
• Safety class: I (power unit),
III (soldering iron)
• Temperature control: 50°C - 450°C
• Temperature accuracy: ± 9°C
• Temperature stability: ± 5°C
• Soldering tip leakage resistance:
< 2 Ω (tip-to-ground)
• Soldering tip leakage current:
< 2 mV (tip-to-ground)

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 5
 SOLDERING STATIONS

Electronically Controlled Stations (cont’d)

Description Material No. Shelf
Pack
WD2AU WD2AU 1
Micro Digital Rework Soldering Station,
160W Power Unit with Digital Display - Dual
port
• 3 “radio buttons” allows to pre-set
ESD SAFE
frequently used temperature settings
• Extensive Special Functions menu
allows you to utilize access features
• Setback, lockout, temp. window, F/C
switching, standby, auto-off time
• Large high contrast LCD display
displays more information ­at a glance
• Compatible with WP80 and WMP
soldering pencils
• ESD safe to protect sensitive
components
• ROHS & WEEE Compliant

WD2MAU WD2MAU 1
160W Power Unit with Digital Display
- 2 Port
• 3 “radio buttons” allows to pre-set
frequently used temperature settings
• Extensive Special Functions menu ESD SAFE

allows you to utilize access features

• Setback, lockout, temp. window, F/C
switching, standby, auto-off time
• Large high contrast LCD display
displays more information ­at a glance
• Compatible with WP80, WMP, WMRP
and WMRT soldering pencils
• ESD safe to protect sensitive
components
• USB Interface & Software
• ROHS & WEEE Compliant

WD2000AU WD2000AU 1
Dual Channel Digital Soldering Station
• Mircroprocessor-controlled soldering
station in a modern ergonomic design
for Weller soldering tools up to 150 W
• Temperature control 50°C-450°C ESD SAFE
(150°C-550°C with WSP 150)
• Big LCD display
• Three fixed temperatures can be
assigned with the temperature buttons
• The following settings are possible
without any accessory unit: custom-
designed calibration function,
programmable temperature decrease
(setback), interlock functions and
remote ID for ISO applications
• The antistatic design of the safety rest
has got four different setting
• Protection class I (controll unit),
protection class III (soldering iron)
• Max. Power Output 160W; RoHS &
WEEE Compliant; consists of 2 x WP80
80W Soldering Pencil with LTB Tips,
2 x WDH10 Stand
WD2001AU WD2001AU 1
Dual Channel Digital Soldering Station
• Mircroprocessor-controlled soldering
station in a modern ergonomic design
for Weller soldering tools up to 150 W
• Temperature control 50°C-450°C ESD SAFE
(150°C-550°C with WSP 150)
• Big LCD display
• Three fixed temperatures can be
assigned with the temperature buttons
• The following settings are possible
without any accessory unit: custom-
designed calibration function,
programmable temperature decrease
(setback), interlock functions and
remote ID for ISO applications
• The antistatic design of the safety rest
has got four different settings
• Protection class I (controll unit),
protection class III (soldering iron)
• Output 160W; RoHS & WEEE
Compliant; consists of 1 x WP80 80W
Soldering Pencil with LTB Tip & WDH10
Holder, 2 x WMP 65W Soldering
Pencils with Tips & 2 x WDH20 Stands

6 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 SOLDERING STATIONS

Electronically Controlled Stations (cont’d)

Description Material No. Shelf
Pack
WD2002AU WD2002AU 1
Dual Channel Digital Soldering Station
• Mircroprocessor-controlled soldering
station in a modern ergonomic design
for Weller soldering tools up to 150 W
• Temperature control 50°C-450°C
(150°C-550°C with WSP 150) ESD
ESD SAFE
SAFE
• Big LCD display
• Three fixed temperatures can be
assigned with the temperature buttons
• The following settings are possible
without any accessory unit: custom-
designed calibration function,
programmable temperature decrease
(setback), interlock functions and
remote ID for ISO applications
• The antistatic design of the safety rest
has got four different settings
• Protection class I (controll unit),
protection class III (soldering iron)
• Max. Power Output 160W; RoHS &
WEEE Compliant; consists of 1 x WP80
80W Pencil, 1 x WMP 65W Soldering
Pencil with Tips, 1 x WDH10 &
1 x WDH20 Stands
WD2000MAU WD2000MAU 1
Dual Micro Digital Rework Station
• Use WMRP solder pencil and WMRT
desoldering tweezers simultaneously
• Designed for fine pitch, high density
SMT soldering and rework
• 3 “radio buttons” allows pre-set of ESD SAFE
frequently used temp settings
• Setback, lockout, temp. window, F/C
switching, standby, auto-off time
• Large high contrast LCD display
displays more information at a glance
• The “tip to grip” distance of the WMRP
pencil is just 45mm
• WMRT tweezers utilize a tip cartridge
that is always in alignment
• Tweezers are automatically switched off
when placed in the WMRTH holder
• ESD safe to protect sensitive
components
• ROHS & WEEE Compliant
• Max. Power Output 160W; RoHS &
WEEE Compliant; Consists of WMRP
40W Micro Soldering Pencil with RT3
Tip and WDH50 Holder, WMRT 80W
Micro Desoldering Tweezers with
RTW2 Tip and WMRTH Holder
WD3mAU WD3MAU 1
The Weller® WD 3M is a versatile unit for use in

N EW industrial, production, engineering, repair and

laboratory applications to carry out professional
repair work on electronic assemblies using the latest
technology. The WD 3M enables the combined use
of Weller®’s new High-Power Irons and Micro-Tools
ESD SAFE
to handle modern HF-shielded and SMT-flooded
electronics.
• The WD 3M has 3 independent
channels for the simultaneous
operation of 3 soldering tools
• Precise temperature control at the
soldering tip is guaranteed by Weller®’s
digital control technology and superior
sensor and heat-transfer technology
• High-speed measured-value
acquisition gives maximum temperature
precision and optimal dynamic
temperature performance in load
situations
• The temperature can be adjusted in the
range 50°C - 450°C for WP80/WP120
and other soldering tools.
• Three temperature buttons to set fixed
temperatures directly.
Benefits from various outstanding functions of the
WD 3M!
• Automatic tool detection and activation
of corresponding control parameters
• Digital temperature control
• Option of inputting offset values
• Programmable temperature reduction
(setback)
• Standby and lock functions
• Antistatic device design in
accordance with ESD safety
• Different equipotential-bonding
possibilities on the device (standard
configuration hard grounded)
• Customer-specific calibration function
• USB port for control, evaluation and
documentation via PC
• Dimensions (L x W x H):
273 x 235 x 102 mm
• Mains voltage supply: 230V / 120V /
50/60 Hz
• Power: 420 W
• Safety class: I and III
• Temperature control: 50°C - 450°C
• Temperature accuracy: ± 9°C
• Temperature stability: ± 2°C

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 7
 SOLDERING
WD 3000HPT Soldering Station 420STATIONS
W

WP 120 High-Power Soldering Pencil for HF shieldings, WD 3000HPT Soldering Station

WD 3000HPT Soldering Station 420 W
Micro-Tools for handling of small and sensitive SMT Order-No. 230 V: 005 33 736 99
Electronically
components.
Controlled Stations (cont’d) Order-No. 120 V: WD3000HPT
Three channels with High-Speed-Regulation for all Description Material No. Shelf
WP 120 High-Power Soldering Pencil for HF shieldings, WD 3000HPT Soldering Station
Micro-Tools and the High-Power WP 120 Soldering Pencil. Scope of supply: Pack
Micro-Tools for handling of small and sensitive SMT Order-No. 230 V: 005 33 736 99
components. Order-No. 120 V: WD3000HPT
WDWD3000HPT
3M Power Unit WD3000HPTAU 1
Three channels with High-Speed-Regulation for all
NEW
Micro-Tools and the High-Power WP 120 Soldering Pencil.
WPWD3000HPT
120
Scope of supply:
WDHWP10T
SolderingHigh
Station
120 High-Power Soldering
420W, 230V
Performance
Safety RestPencil
Soldering Pencil, 120 W
for HF
with Stop + Go function
shieldings, Micro-Tools
WMRP for handling
Micro Pencil, 40ofWsmall
WD 3M Power Unit
WDHand50sensitive SMT components.
Safety Rest with Stop + Go function
WP 120Three channels with HighHigh-Speed-Regulation
Performance Soldering Pencil, 120 W
WMRT Micro Tweezers, 80 W (2 x 40 W)
WDH 10T Safety
for all Micro-Tools andSafetyRestHigh-Power
the with Stop + WP Go function
WMRTH Rest with Stop +120 Go function
WMRP Soldering Pencil.Micro Pencil, 40 W
WDH 50Includes: Safety Rest with Stop + Go function
WMRT • WD 3M Power Unit Micro Tweezers, 80 W (2 x 40 W)
WMRTH• WP 120 High PerformanceSafety Rest with Stop + Go function
Soldering
Technical Data
Pencil, 120W WD 3M
• WDH 10T
Dimensions (L Safety Rest with Stop237
x W x H): + Go
x 235 x 102 mm
functiion 10.75 x 9.25 x 4.02 inches
•
Technical WMRP Micro
Data WD 3M
Mains voltage: Pencil, 40W 230 V / 50/60 Hz; 120 V / 50/60 Hz
• WDH
Power 50 Safety Rest with Stop +
input: Go 420 W
max.
Dimensions (L x W x H): 237 x 235 x 102 mm

New
function
Protection class: I
• WMRT Micro Tweezers, 80W 10.75 xx40W)
9.25 x 4.02 inches
(2 50°C
Temperature control: – 450°C (150°F – 850°F)
Mains voltage:
• WMRTH Safety Rest with Stop230 V+/ Go50/60 Hz; 120 V / 50/60 Hz
Temperature accuracy: ± 9°C (± 17°F)
Power input:
function max. 420 W
Temperature stability: ± 5°C (± 9°F)

New
Protection class: Data:
Technical I
Tip-to-ground resistance: <2Ω
• Dimensions
Temperature control: (L x W x H): 237 x 235
50°C x (150°F – 850°F)
– 450°C
102mm,
Temperature 10.75 x 9.25 x 4.02
accuracy: ± inches
9°C (± 17°F)
Potential-free plug (factory set hard grounded)
• Mains
Temperature voltage: 230V / 50/60
stability: Hz (± 9°F)
± 5°C
• Powerresistance:
Tip-to-ground input: max. 420W < 2 Ω
• Protection class: 1
WD 3002HPT Soldering Station 420 W • Temperature
Potential-free control:set
plug (factory 50°C-450°C
hard grounded)
(150°F-850°F)
• Temperature accuracy: ± 9°C (± 17°F)
One station, two High-Power Soldering Pencils for WD 3002HPT Soldering
• Temperature stability:Station
± 5°C (± 9°F)
WDdifferent
3002HPT Soldering
applications Station
or parallel work. 420 W Order-No. 230 V: resistance: < 2 Ω
• Tip-to-ground 005 33 746 99
Three channels with High-Speed-Regulation for all Order-No. 120 V:plug (factory set hard grounded) WD3002HPT
Potential-free
Micro-Tools and High-Power Soldering Pencil WP 120.
One station, two High-Power Soldering Pencils for WD 3002HPT Soldering Station
Scope of supply:
different applications or parallel work. Order-No. 230 V:
WD3002HPT 005 33 746 99WD3002HPTAU 1
Three channels with High-Speed-Regulation for all Order-No. 120 V: Soldering Station 420W, 230V WD3002HPT
WDWD3002HPT
3M Power Unit
Micro-Tools and High-Power Soldering Pencil WP 120.
WPOne
120station, two High-Power Soldering
High-Power Pencils
Soldering Pencil, 120 W 2x
W Scope of
forsupply:
different applications or parallel
Rest withwork.
NE
WDH 10T Safety Stop + Go function 2x
Three channels with High-Speed-Regulation
WD 3M for all Micro-ToolsPower
and High-Power
Unit Soldering
WP 120Pencil WP 120. High-Power Soldering Pencil, 120 W 2x
Includes:
WDH 10T Safety Rest with Stop + Go function 2x
• WD 3M Power Unit
• WP120 High-Power Soldering Pencil,
120W 2x
• WDH 10T Safety Rest with Stop + Go
function 2x

New 9

New WSD151 T0053277599

9
1
Extremely high output soldering station
delivering 150 watts
• Digital microprocessor temperature
control with LED display
• Automatic shut off
• Calibration box (WCB1 or WCB2) may
ESD SAFE
be connected
• °C-°F switchable
• Temperature range 50°C-550°C
• Max. power output 150W
• ROHS & WEEE Compliant
• Made in Germany
Soldering station consists of
• PUD151 230V Power Unit
• WSP150 150 Watt 24V Pencil
• KH27 Holder
• LHT-F tip

8 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 ACCESSORIES

Tool Selection Chart

Tools

HAP200
DS80UNC
TC201B
Station

WHPS80

WSB150
WSP150
WSP80

WST82

WP120
WTA50

DSX80
PRS50

WMRP
PES51

WMRT
TC201

WP80

WMP
WTCPT t
WTCPTD t
WES50D t
WES51D t
WESD51D t
WSD81 t t t t t t t t
WSL t t t t t t t t
WSD151 t t t t t t t t t t
WSD161 t t t t t t t t t t
WMRS t t t t t t t t t t
WD1000AU t t t t t t t t
WD1001AU t t t t t t t t
WD2000AU t t t t t t t t t
WD2001AU t t t t t t t t t
WD2002AU t t t t t t t t t t
WD1000MAU t t t t t t t t t t t
WD2000MAU t t t t t t t t t t t
WD1AU t t t t t t t t t
WD2AU t t t t t t t t t t t
WD1MAU t t t t t t t t t t t
WD2MAU t t t t t t t t t t t t t
WD3MAU t
WMD1 t t t t t t t t t t t t
WMD1A t t t t t t t t t t t t
WMD1D t t t t t t t t t t t t
WMD3 t t t t t t t t t t t t t t
WMD3K2 t t t t t t t t t t t t t t
WR3M t t t t t t t t t t t t t t t t t t
WR3000M t t t t t t t t t t t t t t t t t t

Optional Accessories
www.weller.eu April 29, 2008
Description Material No. Shelf
Pack
NEW: WD 1000HPT WP80 80 Watt Soldering Pencil with Short T0052918099 1
Tip-To-Grip
• Compatible with WD1 and WD2
Soldering Stations, and WRS Rework
Stations
The New Generation • New WP80 offers 80 watts of power
with short tip-to-grip (40 mm)
of High Power Tools • New WP80 has same performance
characteristics as the WSP80
• Perfect for Lead Free solder
• ESD safe to protect sensitive
components
• ROHS & WEEE Compliant
• See page 26 for LT tips, Accessories
and Spares
• Spare element NOT available
www.weller.eu (sealed to handle) April 29, 2008

NEW: WD 1000HPT
Weller Info No. 15 ®
WP80 Set T0052918199 1
• Consists of:
• WP80 soldering pencil
• WDH10 support
• ROHS & WEEE Compliant
The New Generation • See page 26 for LT Tips

of High Power Tools The WD 1000HPT station features Weller®'s new 120 W High
Power Tool, our new
WP80 WP for
Barrel 120 soldering
WP80 Pencil iron. This iron is ideal for
T005874484 1
soldering on challenging circuit boards with heat sinks and big
soldering joints that cause large dissipation in heat transfer.
The Weller® WD 1000HPT station is specifically designed for your
soldering operations which need a combination of high energy
WP120 Soldering Iron T0052919399 1
and maximum• Twice
precision.
as much power and efficiency
W in a small and ergonomic pencil
NE
Weller Info No. 15 ® design
• Powerful heating element with a
The WD 1000HPT comprises
replaceable soldering- tip
The WP 120 Soldering Iron
• Best life cycle cost at dynamic
The new WP 120 performance
High Power Tool offers twice as much power and
• The rapid transfer of heat into the
The WD 1000HPTefficiency station small
in a features and
soldering tip ergonomic
Weller ®
's new
is quickly and120pencil
W High
precisely design. Combining a
Power Tool, compact,
our new powerful
WP 120 heating
controlled with element
soldering Thiswith
sophisticated
iron. aisreplaceable
electronics
iron ideal for soldering tip
soldering on thechallenging
WP 120 guarantees• Designboards
circuit copesbestwith
with bigheat
life and difficult
cycle cost
sinks andat dynamic
big performance.
solder joints even at barely
soldering joints
The that cause
rapid transfer large dissipation
of heat
accessible into the
joints in soldering
heat transfer.tip is quickly and precisely
®
WD 1000HPT
The Wellercontrolled with•station is for
specifically
sophisticated
Also ideal designed
electronics
HF shield plates for your
which
or solar allows the WP 120's
soldering operations whichpanel need a combination of high energy
manufacturing
compact design to cope with big and difficult solder joints even at
and maximum precision.
barely accessible WP120 SetAlso ideal for HF shield plates or
joints. solar
T0052919499 1
W
NE
panel manufacturing. • Consists of:
• WP120 soldering pencil
The WD 1000HPT comprises -
• WDH10T Stop + Go Stand
The WP 120 Soldering Iron• ROHS & WEEE Compliant
The new WP The120WD High1M Power
Power Tool
• See offers
Unit
page 29 fortwice
XT tips as much power and
efficiency inOura small
well and ergonomic
established pencil design. Combining
microprocessor controlledaWD 1M has a number
compact, powerful heating element with a replaceable soldering tip
of in built special functions as preset temperatures, individual settings
the WP 120 guarantees best life cycle cost at dynamic performance.
WDH10T for setback,
The rapid transfer of heatUSB connectivity,
into the soldering tipwhich make
is quickly and itprecisely
ideally suited for use in
controlled production, rework
with sophisticated and laboratory
electronics which allows environments.
the WP 120's
compact designFromtonow copeon webigequip
with all WDsolder
and difficult 1Ms'joints
additionally
even at with new advanced
software
barely accessible specially
joints. Also ideal designed for thisplates
for HF shield new WP 120 High Power Tool.
or solar
Note: Some of the above items may require a freight leadpanel manufacturing.
time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 9
 ACCESSORIES

Optional Accessories (cont’d)

Description Material No. Shelf
Pack
WMP SET 65 watt micro soldering pencil T0052917999 1
and WDH20 Holder

WMRP Soldering pencil for RT soldering tips T0052917199 1

• ROHS & WEEE Compliant
• 40 watt Micro Soldering Pencil Set with
high speed regulation
See page 28 for RT tips

WMRP SET T0052919099 1

EW
Consists of:
N • WMRP 40 W Pencil
• WDH50 Stand

WMRT Micro Desoldering Tweezers with rest T0051317399 1

for WMRS, WD 1M, WD 2M
The new WMRT desoldering tweezers enables
with its twin parallel adjusted tiplets a
significant precise de- and soldering of very
small SMD components. The high speed
regulation of the stations WMRS, WD 1M, WD
2M drives this tweezers. Placed in the rest
WMRTH the tips are automatically switched off
for increasing endurance.
• ROHS & WEEE Compliant

WSP150 150 watt soldering pencil for heavy T0052917099 1

duty work
• ROHS & WEEE Compliant
See page 28 for LHT tips

WSP150 SET T0052918999 1

Consists of:
• WSP150 Soldering Tool
W
NE • WDH30 Stand

PES50 50 watt soldering iron to suit WES50D PES50 1

PH50 Stand not included

PES51 50 watt soldering iron to suit WES51D PES51 1

and WESD51D See page 25 for ET tips PH50
Stand not included

EC1201AP 40 watt soldering pencil with EC1201AP 1

stand

See page 25 for ET tips

10 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 ACCESSORIES

Optional Accessories (cont’d)

Description Material No. Shelf
Pack
DSX80 Iron T0051319099 1

EW
80 Watt Desoldering Pencil
N • Temperature range 50°C-450°C
• RPHS & WEEE Compliant
See page 33 for DX tips

DSX80 SET T0051318399 1

Consists of:
• DSX80 Desoldering Tool
• WDH30 sStand

WTA-50 SET T0053313399 1

The WTA-50 tweezers can be used with
all Weller Temtronic/SL series stations.
Dual heating elements with independent
temperature sensors provide the tips with
constant temperature.
Temperature range 150°C - 450°C
Output 2 x 25W
Consists of:
• Desolder Tweezer
• AK51 Support
• Hex Key
Supplied with WT1 tip See page 30 for WT tips
• ROHS & WEEE Compliant

HAP1 SET T0052711899 1

100 Watt HAP1 Hot Air Pencil & WDH30 Stand.
For both soldering and desoldering of SMD’s.
Temperature range 50°C - 550°C Power
absorption 100W
Consists of:
• HAP1 hot air pencil
• WDH30 Safety Rest
• 1.2mm nozzle
• Xcelite Nutdriver P8 MM
See page 35 for nozzles
• ROHS & WEEE Compliant

HAP200 SET T0052711799 1

Hot Air Pencil set 200W, 24V
The HAP200 provides a directional hot air
flow that is adjustable. Electronic temperature
control from 50°C to 550°C. Different nozzles
available as accessory. Finger switch controls
the adjustable pump. For WR 3M only.

HAP200 Nozzle Adapter

See page 32 for Nozzles T0058761728 1

WHPS80 Preheat plate T0052702899 1

• 80 watt
• 50°C-200°C
• 80 x 50mm
• for use with WSD81, WSD151, WMD
series
• ROHS & WEEE Compliant

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 11
 ACCESSORIES

Optional Accessories (cont’d)

Description Material No. Shelf
Pack
WHP200 Infrared Under Board Heater T0053371599 1
The new WHP200 from Weller is a new
W under board heater which although small in
NE dimensions is very powerful. The WHP200 is
designed to be used on small multipayer PCBs
to minimise the risk of thermal damage to
boards and to speed up the repair process.
• Universal application
The WHP200 is suitable for use with a
range of consumer electronic boards. It
is perfect for rework operations on
digital camera, mobile phones, MP3
players and PDA pcbs
• Fast and efficient heating
The infrared plate provides fast,
precisely controlled heating to create
an even substrate temperature
• Operating simplicity
The WHP200 is simple to use with very
easy adjustment for the heating
temperature. The heating plate comes
complete with a pcb board holder so
there is no need to buy additional
accessories
• Excellent Price-/Performance ratio
The WHP under board heater provides
an excellent Price-/Performance
balance
• Dimensions (L x W x H):
193 x 193 x 84 mm
inc. pcb holder 7,6 x 7,6 x 3,3 inch
• Dimensions Heating Zone (L x W):
120 / 60 mm; 4,72 / 2,36 inch
• Voltage: 230 V / 50/60 Hz
• Power: Heat Zone 200 W
Medium Wave Infrared
• Safety Class: I
• Regulation: 50°C - 400°C

WRK Rework Nozzle Kit T0051515599 1

The newly developed, innovative desoldering
system facilitates soldering and desoldering of
large SMT components up to 30 x 30 mm.
The desoldering system can be connected to
the additional vacuum channel (pick up) of the
WR 3M.
• 8 Nozzles
• Assorted Vacuum Cups
• 2 Vacuum Rods and Hose
• Stand

WSB80 T0052704099 1
80 Watt Solder Bath is a very useful
rework preparation tool. The solder bath is
temperature controlled continuously between
50°C to 450°C via an existing 80W power
source (WSD81, WMD series). The solder bath
can be used to tin wire ends and leads of all
extraneous solder particles in preparation for
reworking.
• 150x120x65mm
• Warm up time (approx) 7 minutes
• ROHS & WEEE Compliant

WSB150 T0052704299 1
150 Watt Solder Bath. Accessory for WD2, and
WD2M Power Units.
•  For tin coating and preparation of
electronics components and leads
• Also used to clean excess solder from
component leads
• Compatible with lead free solders

WST20 Termal stripping tool 50 W, 24 V T0052503099 1

The WST20 temperature controlled thermal
stripping tool is suitable to all digital Weller
stations. It strips off thermoplstic insulation
materials by using precisely shaped stripping
blades. The stripping length is adjustable up
to 30mm.

12 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 ACCESSORIES

Optional Accessories (cont’d)

Description Material No. Shelf
Pack
WST82 Thermal Stripping Tool 80 W, 24 V, T0052503199 1
with flexcord.
The WST82 temperature controlled thermal
stripping tool is suitable to all digital Weller
stations with minimum 80 W. It strips off
thermoplastic insulation materials by using
precisely shaped stripping blades. The
stripping lenth is adjusbale up to 30 mm.
Optimal temperature control via power unit
(accessory).

Soldering pencils, Magnastat temperature controlled, low voltage

TC201B Magnastat Tool suits WTCPTD 42W 24V TC201B 1
TCP12 Magnastat Tool 40W 12V TCP12 1
TCP50M Magnastat Tool 40W 50V TCP50M 1
TC201 Magnastat Tool suits WTCPS/T 40W 25V TC201 1

Soldering pencils, temperature controlled, line voltage

W60D Magnastat Tool 60W W60D 1
W100D Magnastat Tool 100W W100D 1
W201D Magnastat Tool 200W T0056107599 1

See page 34 for Tips

Tool Stands
PH1201 Tool Stand for TCP, TC, EC and SP PH1201 1

PH50 Tool Stand for PES50 and PES51 PH50 1

PH1201 PH1260 W60D Tool Stand PH1260 1 Ref Hardware

PH50 Catalogue

PH12100 W100D Tool Stand PH12100 1 Ref Hardware

Catalogue

WDH10 Support for WSP80 & WP80 T0051512199 1

with four different settings

WDH20
WDH20 Support for WMP T0051512299 1
with four different settings
WDH10

WDH30 Tool Stand for HAP200 & DS x 80 T0051515299 1

WDH40 Tool Stand for DX80 T0051515399 1

WDH30 WDH50 Tool Stand for WMRP T0051515699 1

WDH10T WP80 Stop-N-Go Stand T0051516199 1

WDH50
WDH20T WMP Stop-N-Go T0051516299 1

WDH10T AK51 Stand for WTA50 T0051504299 1

AK20 Stand for DS80UNC T0051503099 1

AKV Stand for DSV80UNC / DSX80 T0051503899 1

AK20
WMRTH

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 13
 ACCESSORIES

Tool Stands Chart

STANDS

PH12100
WDH10T

WDH20T
PH1201

PH1260
WDH10

WDH20

WDH30

WDH40

WDH50
Tools

AK20

AK51
PH50

AKV
TCP
TC
EC
SP
EC1302B
PES50
PES51
WSP80
WSP150
WP80
WMP
WMRP
WMRT
WVP
WTA-50
HAP1
HAP200
DS80UNC /DSV
DSX80
W60D
W100D

Fume Extraction Stands

Description Material No. Shelf
Pack
PH1201F As per PH1201 but allows for fume PH1201F 1
extraction (not micro irons)
Stand for TC201 & EC Series.

WPH80 Stand for WSP80 & WSP81 T0051514099 1

WPH80
PH1201F

Soldering Aids
W101CH Miniature temperature controlled W101CH 1
solder bath (330°C) with horizontal stand.
100W 230V Consists of:
• 100W Solder Bath with Insert
• Support for Solder Bath
ESF-120ESD T0051502699 1
Printed circuit board holder
• Adjustable to Eurocard size
• Suitable for holding irregular shaped cards
• Component support
WPBI Polishing Bar WPBI 1
• Rejuvenates tips without damage to the
plated surface

WLSK200 Vacuum pen for easy pick up of WLSK200 1

small components.
Fully self contained.

SD1000 Solder Dispenser T0051301799 1

• For coils up to 1000g
• For use of coil up to
W
NE W length 95mm, core Ø > 17mm
NE length 84mm, core Ø < 12mm
ABW2 Extension for additional reel T0051301399 1
• To be fixed on SD1000
• For coils up to 1000g
• For use of coil up to
length 95mm, core Ø > 17mm
length 70mm, core Ø < 12mm
length 84mm, core Ø < 12mm
SD1000 ABW2
WDC Dry Cleaning System T0051512499 1
• Very effective cleaning from oxides on
solder tips especially when using lead
free solder.
• Good stability (does not slide on work
bench)
• Longer life of metal wool due to
tapping of the solder into the box
before cleaning.
• Metal wool does not contain flux.
• User may use any flux which is
accepted for his process.
• Cleaning result will be even better if
wool is wetted with flux. ESD SAFE

WDC2 Dry Cleaner Attachment T0051512599 1

WDC2 WDC Wire Wool 2 Refills T0051382499 1
WDC

De-Soldering Pump
WDS De-Soldering Pump WDS Refer Hardware
• High Suction Power, Lightweight Cat.
• Ideal for PC Board Repairing
• Clean the cylinder occasionally

14 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 ACCESSORIES & PORTABLE SOLDERING TOOLS

Electronic Temperature Measuring Equipment

Description Material No. Shelf
Pack
WTT1 T0053124699 1
Temperature measurement and calibration.
• Measures temperature without
imposing thermal load.
The WTT1 digital temperature
measuring system has been
specifically designed for measuring
the temperature of soldering iron tips.
The probe has a double sensor system
and internal heat source. The
measured temperature is fed to a
control system that records the flow of
heat in the probe and stabilizes it with
the aid of the internal heat source.
This design ensures that no heat is
drawn by the probe from the
object being measured. Erroneous
measurements due to the large thermal
load of the probe are thus prevented.
The measured temperature is indicated
on a three-digit LED display to a
resolution of 1°C.
An adjustable preheat temperature
ensures a rapid response even at high
temperatures.

WCB2 T0053118099 1
As for WCB1 with the following additional
features:
• Thermo couple input for automatic
calibration.
• RS232 output

Portable Soldering Tools

ML500MP Magna-Lite Butane Soldering Iron ML500MP 4
• Applications include soldering, heat shrink
tubing, electrical, electronics, field service
W
NE
repair
• Waterproof piezo ignition for fast, reliable
ignition
• Adjustable flame height
• Temperature adjustable from 400°C to
510°C
• 30 minute run time
• Also operates as a torch when soldering tip
is removed
• Refills with standard butane gas (Weller
BR200)

WHK30AU 30 Watt / 230 V - Woodburning WHK30AU 6

& Hobby Kit
• 15 piece set, including 12 tips, ideal for wood
burning, sculpting, adding accents, stencil
W cutting, pattern transfers, hot knife cutting,
NE embossing and branding
• 30 Watt short barrel Woodburning Iron
• Set contains 6 Woodburning tips, Hot Knife
Tip with Blade Chuck, Pattern Transfer Tip,
3 Branding Tips, Iron Stand and complete
Project Book
• Boxed in plastic presentation case

BP860MPA BP860MPA 5
Dual Heat Battery Powered Cordless Soldering
Iron
• Perfect tool for light duty soldering jobs
where portability is necessary
• Solders up to 180 solder joints per
battery charge
• Medium Duty - 8 to 11 Watts
• Dual Heat gives two different working
tempeatures - 450°C and 500°C
BP10
BP10 Conical Tip
BP11 Chisel Tip BP11

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 15
 PORTABLE & BUTANE POWERED SOLDERING IRONS

Portable Soldering Tools

Description Material No. Shelf
Pack
WPSI12V 12 Volt Portable Soldering Iron WPSI12V 1
• 42 Watt Battery Powered, with
temperature control
• Powered by a 12 Volt, 7.2 amp hour
sealed lead acid battery
• Fitted with an automotive cigarette
lighter plug for direct connection to
other 12 Volt power sources
• 21 types of PT series tips available in
315ºC, 371ºC & 427ºC
• Battery life of 2-8 hours dependant on
usage
• Fluoro yellow carry pack with high
visibility reflective strip, carry strap &
soldering tool stand
• 3 stage automatic battery charger
included
NSN: 3439-66-155-0279

Weller® Pyropen
WPA2 WPA2 1
Piezo ignition (self) lighting.
Kit includes:
• 1 x WPT-2 soldering tip
• 1 x WHC-52 hot blow tip
• Metal kit box
See page 32 for tip selection

WSTA3 WSTA3 1
Soldering, hot blow and torch flame facilities.
kit includes:
• 1 x soldering tip
• 1 x hot blow tip
• torch ejector tightening bar
• Metal Kit box
See page 32 for tip selection

WSTA6 WSTA6 1
Junior pocket size with auto ignition
• Fitted with pocket clip
• Suitable for soldering and hot blow
applications
• 1 x WPT-01 tip
See page 31 for tip selection

WSTA5 WSTA5 1
Jumbo, (self igniting)
Kit includes:
• Soldering Tip 72-01-02
• Hot Blow Tip 72-01-52
• Metal kit box
See page 31 for tip selection

Weller® Portasol
PSI100K PSI100K 1
Piezo ignition (self lighting).
Kit includes
• 1 x soldering, hot blow and cutting tip
• Torch flame facility
Tips Include:
• PSI - 6. PSI - 8, PSI - 9, PSI - 10
See page 32 for Portasol tip selection

BR200 BR200 12
Weller Butane Gas refill, 200 grams.
Suitable for all above irons.

16 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 REWORK STATIONS

Repair/Rework Stations
All Weller repair and rework stations feature automatic tool recognition and will accept any Weller temtronic tool including the WTA50, desoldering
tweezers, WSB80 and WSB150 solder baths and WST20 thermal strippers. These stations have a built in pump to supply vacuum for desoldering and
air for hot air soldering and desoldering. Special desoldering heads for SMD components removal are available. A finger switch control on
the desoldering tool handle and hot air pencil will operate the air pump. SMD components can be lifted off with the vacuum of the desolder head.
The hot air pencil (HAP1) is used for reflowing with solder paste or desoldering. Smaller components can be removed with the standard nozzle. Larger components can
be desoldered with a suitable nozzle.

Description Material No. Shelf

Pack
WMD3K2 T0053302659 1
A multi digital 310W desoldering station.
• 3 Channel
• Temperature Range 50°C-450°C (Hot
Air 500°C)
• Air Volume Hot Air 1-10 l/min
• Maximum Vacuum -0.7 bar
• Temperature, Vacuum and Air Control
via Station
• 3 position Digital Display ESD SAFE
• Protection Class 1
• Antistatic Housing
• Automatic Tool Recognition
• Consists of: WMD3 Control Unit, WP80
80W Soldering Iron, WDH10 Stand for
WP80, DSX80 80W Desoldering Iron,
AK20 Stand for DSX80, DX112 &
DX113 Desoldering Nozzles, Cleaning
Set, WDC Dry Cleaner

WMD1D T0053333599 1
A multipurpose station to handle all rework
and repair requirements.
• Digital microprocessor provides
complete accuracy and reliability
• Self contained air & vacuum
• Programmable temperature, hot air flow
and automatic set-back
• Operator lock out prevents
unauthorised changes ESD SAFE
• Temperature range, hot air 50°C-550°C,
solder and desolder 50°C-450°C
• Idle temperature set-back, 5-60
minutes
• Large range of optional tools
• Made in Germany
Station consists of:
• WMD1S Power uni
• DSX80 desoldering tool
• ROHS & WEEE Compliant

Desoldering Tiplets: DSX-Series see page 33

WMD1A T0053330699 1
A multipurpose station to handle all rework
and repair requirements.
• Digital microprocessor provides
complete accuracy and reliability
• Self contained air & vacuum
• Programmable temperature, hot air flow
and automatic set-back
• Operator lock out prevents
unauthorised changes
• Temperature range, hot air 50°C-550°C, ESD SAFE
solder and desolder 50°C-450°C
• Idle temperature set-back, 5-60
minutes
• Large range of optional tools
• Made in Germany
Station consists of:
• WMD1S Power unit
• HAP1 hot air pencil
• ROHS & WEEE Compliant

Hot Air Nozzles: see page 35

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 17
 REWORK STATIONS & HOT AIR STATIONS

Repair/Rework Stations
Description Material No. Shelf
Pack
WR3M T0053366699 1
Package includes:
• WR 3M repair station
• Adapter for HAP200 hot-air pencil
• CD with USB software
• USB cable
Technical data:
• Dimensions L x W x H (mm):
237 x 235 x 102
• Weight: approx. 6.7 kg
• Mains supply voltage: 230 V, 50 Hz ESD SAFE

(120 V, 60 Hz)
• Power consumption: 420 W
• Safety class: I and III, housing antistatic
• Fuse: Overcurrent release 2 A (4 A)
• Temperature control Soldering and
Desoldering iron stepless of channels:
50°C-550°C
• Controllable temperature range is tool-
dependent
• Temperature accuracy: ± 9°C
• Temperature stability: ± 2°C
• Pump (periodic duty (30/30) s): Max.
vacuum 0.7 bar
• Max. delivery rate 18 l/min
• Hot air max. 15 l/min
• Additional Pump: Max. vacuum 0.5 bar
• Max. delivery rate 1.7 l/min
• Equipotential bonding: Via 3.5 mm pawl
socket on back of device

WR3000MAU WR3000MAU 1
Rework Set
Package includes:
• WR3M
• HAP200 Hot-air pencil with WDH30
Safety rest
• DSX80 Desoldering iron with WDH30
Safety rest
• WP80 Soldering iron with WDH10 Stop
+ go Safety rest
• WVP Vacuum pick up ESD SAFE

• WDC2 Dry cleaner

Technical data:
• Dimensions: L x W x H (mm):
237 x 235 x 102
• Weight: approx. 6.7 kg
• Mains supply voltage: 230 V, 50 Hz
(120 V, 60 Hz)
eo &
View vid e at • Power consumption: 420 W
chur • Safety class: I and III, housing antistatic
PDF Bro • Fuse: Overcurrent release 2 A (4 A)
er.com
www.well
• Temperature control Soldering and
Desoldering iron stepless of channels:
50°C-550°C
• Controllable temperature range is tool-
dependent
• Temperature accuracy: ± 9°C
• Temperature stability: ± 2°C
• Pump (periodic duty (30/30) s): Max.
vacuum 0.7 bar
• Max. delivery rate 18 l/min
• Hot air max. 15 l/min
• Additional Pump: Max. vacuum 0.5 bar
• Max. delivery rate 1.7 l/min
• Equipotential bonding: Via 3.5 mm pawl
socket on back of device

18 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 HOT AIR STATIONS

Hot Air Stations

The advanced technology of Weller hot air stations ensures greater controlled precision when soldering and desoldering sensitive SMD components. Medium to
large SMD components are extremely susceptible to thermal and physical damage. Weller hot air stations provide gentle, controlled hot air flow being directed to the
leads of the component. An in-built vacuum pick-up within the nozzle of the WHA2000 makes the removal and replacement of the component safe and easy without
damaging the circuit board pads or component leads.

Description Material No. Shelf

Pack
WHA3000P T0053334699 1
Hot Air Station
• 700 watt hot air station with patented
Weller nozzle technology for maximum
process ontrol.
• The powerful variable speed controlled
turbine generates an air volume of up
to 50 litres/min.
• An ion trap so that charge free hot air
is directed at the component.
• Memory space to store up to 10
ESD SAFE
thermal profiles to ensure process
repeatability
• The WHA 3000P will perform
demanding repair tasks on circuit
Dimensions 240 x 270 x 170 (W x L x H mm) boards with complex fine pitch surface
Mains Voltage: 230V mounted components.
Max Heat Power: 700 w
Temp Range: 50ºC - 550ºC • The advanced control technology
coupled with user friendly operation,
guarantees precision of repair
processes.
• Extensive range accessories
compliment the machine to promote
flexibility.
• Foot pedal available.
• ROHS & WEEE Compliant

WHA3000PS SET T0053355699 1

Set contains:
• WHA3000P Hot Air Station
• WBH Circuit board holder
• WHP3000 Heating plate

ESD SAFE

WHP3000 Heating Plate - 600W T0053338699 1

• The WHP 3000 increases the flexibility
of the WHA systems.
• It provides underside heating to the
board under repair, reducing the heat
requirement from the hot air pencil
and therefore minimising the risk of
thermal damage to the board as well
as speeding up the repair process.
• The heated surface comprises 3 high
temperature ceramic elements that
ensure fast and efficient heating.
• IR Heating plate total heated area
120 mm x 190 mm with 3 ceramic
elements.
• Set temperatures and actual
temperatures are digitally displayed.
• An external sensor can be connected
to display actual temperatures at
specific areas of the circuit under
repair.
• The hot plate can be controlled from its
own internal control system or
integrated into the control system of the
WHA 3000P/V
• ROHS & WEEE Compliant

WHP3000 Heating Plate 1200 W, 230 V, 190 x T0053364699 1

245 mm same as WHP 3000 but with heatable
surface 190 x 245 mm
Heating plate 1200 W, 230 V
• ROHS & WEEE Compliant

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 19
 HOT AIR STATIONS

Hot Air Stations

Description Material No. Shelf
Pack
WBHS T0053316399 1
Circuit Board Holder & Pivoting Stand
• Retains and secures the circuit board
under repair and allows positioning of
the board in X and Y directions.
• A wide range of accessories available
separately permits boards up to a max
size of 310mm x 320mm both single
and double sided to be accommodated
in a perfectly flat condition.
• The WBH 3000S incorporates a ESD SAFE

pivoting stand to mount the HAP 3000

hot air pencil. This stand allows the
HAP 3000 to be raised and lowered
onto the component under repair.
• An added safety feature is the Stop
Dimensions 440 x 320 x 446 (W x L x H mm) + Go function, which will automatically
switch the hot air pencil into a standby
mode if the stand is pivoted to the side
of the board holder without first
switching off the hot air.
• The pre-heating plate WHP 3000
(supplied separately) can be fitted
under the board holder to provide
background heating.
• ROHS & WEEE Compliant

WBH T0053316499 1
PCB Holder
• Holds circuit boards up to 310 x 320
mm in the x-y direction
• The WHP3000 heating plate can be slid
under the PCB holder
• Same as WBH3000S but without
pivoting hot air tool holder

WHA900 T0053171699 1
Hot air station 700W with built-in turbine
Low cost hot air station for less complex
repair tasks and hot air applications suck as
shrinking. The in-built turbine provides hot air
and variable temperatures. The temperature of
the hot air is electronically controlled.
• Analogue temperature adjustment
• Temperature range 50°C-550°C
• Air Volume 5-50 l/min (ESD Safe)
• Two rotary potentiometers to set air ESD SAFE

temperature and air volume

• Standby and calibration function
• Safety Class I
• ROHS & WEEE Compliant

20 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 REPAIR/REWORK BGA/QFP STATIONS

Repair/Rework BGA/QFP Stations

Weller remains at the forefront of Rework Technology. As on board components
have become more and more complex Weller has led the field with innovative, user
friendly repair and assembly tools that solve the rework problem. The introduction
of the BGA was no exception, with its small footprint area, hidden connections,
and high connection density, rework operators have been presented with very
real placement and removal problems. The WQB 3000 machines are the second
generation of the Weller BGA/SMT repair system. They meet the exceptional
demands required of a modern rework tool and deliver the benefits at a value for
money price. Weller has developed a comprehensive user friendly program for the
removal and re-balling of BGA components, site preparation, solder paste printing,
placement and re-flow, without the risk of thermal damage to the component or
the circuit board. No matter what the component, BGA, QFN, QFP, PLCC, SOP, PGA or
surface mounted sockets, Weller has the rework answer.

Due to the rapid advances in SMD component development, increasingly complex

processes are demanded for assembly and rework. Ball Grid Array and fine pitch
leaded component rework require considerable technical expertise to achieve a
successful repair. The Weller WQB 3000 system has this capability.
The Rework Cycle:
Development of the temperature profile
• Repeatable results can only be achieved by a process cycle that considers all
the parameters of the repair operation.
• To allow removal of the component from a circuit board without damage to the
board, a temperature profile of the operation must be established.
The “Self Teach” feature of the WQB 3000 provides a quick and easy method
of finding the parameters of the process cycle, without the need of in depth
operator knowledge.
Component Removal
• Necessary for successful re-flow of the solder joints is the ability to preheat the
circuit board and a temperature/time controlled process.
• A vacuum actuated lift to automatically remove the component from the board
with minimum force at the end of the re-flow cycle to ensure no damage to the
solder pads.
Cleaning of the circuit board
• Residual solder should be removed from the board with a desoldering iron or
desolder wick.
• Residual contaminants should be removed with a suitable solvent spray.
Solder Application.
• Stencil printing should be used to apply fresh solder to the pads; this ensures
that the correct volume of solder paste is deposited.
Positioning of the component
• A precise positioning system is required to place components with hidden joints,
Weller offers two distinct systems.
• WQB 3000 uses the patented Weller template positioning process, a low cost but
precise operation.
• A wide range of templates, for BGA, QFP and PLCC components are available
• WQB 3000 OPS uses a computer aided camera placement system, which is
particularly useful if it is necessary to place a wide range of components.
Soldering of the component
• Re-flow of the replaced component is a repeat of the removal process except
the vacuum lift is not initiated at the end of the profile.
• To cater for the many body sizes of BGA devices, a wide range of hot gas nozzles
are available.
• To solder QFP and PLCC packages, an adapter is available to permit the use of
the Weller NQ/ND family of hot gas nozzles.
Inspection of the solder joint
• Once the rework process has been verified by inspection of the completed repair,
and then the repeatable profile controlled by the stored program can be applied
ensuring that all subsequent repairs are carried out to the same parameters
reducing the necessity of inspection to a minimum.

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 21
 REPAIR/REWORK BGA/QFP STATIONS

Repair/Rework BGA/QFP Stations

The new WQB Repair System upgrades the Weller product range in the SMD repair tool sector. A well thought-out design concept combines reliability and maximum process control with ease
of use and technically mature detail solutions. Useful accessories increase the possible uses of this repair work station.
On the WQB 3000 the temperature-regulated 2-zone infrared bottom heater provides rapid warm up and homogeneous substrate temperatures. The hot gas top heater, with digital control
electronics for temperature monitoring and regulation of the air flow rate, facilitates the finely metered supply of heat to the components.
A temperature sensor placed directly in the hot gas nozzle efficiently regulates the top heater and thus provides maximum process control.

Maximum precision. Maximum flexibility.

Large chip removal station with high energy handpiece. Extensive assortment of economically priced nozzles, with custom sizes made to order.

Description Material No. Shelf

Maximum user-friendliness. WQB4000SOPS T0053370699 1

Pack

EW
Weller’s next-generation repair and rework station combines a completely
N new design with state-of-the-art split optic camera technology to provide
users with absolute reliability, optimum process control and enhanced ease
of use.
Weller’s next-generation repair and rework • Advanced
The system design for enhanced
was engineered to bring precision
station combines a completely new design togetherThe WQB4000SOPS
a finely is modularly
tuned balance of auto-built with a slide platform,
advanced patented systems and materials of the highest quality to
with state-of-the-art split optic camera mated technology for component
guarantee industrial pick-up
reliability and long-lasting durability.
technology to provide users with absolute and positioning
• Heating with
from aabove:
semi-automated
selective and sensitive
reliability, optimum process control and rework cycle
The hot– opening
gas heaterupwith
newpatented
possibili-
nozzle system, coupled with
enhanced ease of use. digital control in
ties and applications electronics
repair and for rework.
temperature monitoring and regulation
of the air flow rate, facilitates the finely metered supply of heat to
the components. A temperature sensor placed directly in the hot
Well considered
gas nozzle detail, high-precision
prevents thermal overload of the component and
results and an outstanding
efficiently price-perfor-
regulates the top heater, providing maximum process
mance ratio promise to make this new
control.
system •from
Heating fromthe
Weller below:
first rapid
choiceandamong
homogeneous
discerningTheusers.
temperature-regulated two-zone infrared bottom heater
provides rapid, yet precisely controlled warm-up at homogeneous
substrate temperatures.
• Streamlined technology
The new WQB4000SOPS enables users to work with a standard
PC via a USB 2.0 port. Additional appliances or interface cards are
not required. Technical Data
• Monitoring software: comprehensive functions Dimensions (L x W x H):
The monitoring software determines temperature profiles and approx. 630 x 630 x 650 mm
facilitates definition of the optimal soldering process. Dynamic dimensions:
• Teach-in feature: fast, effective parameter identification approx. 1030 x 630 x 650 mm
Advanced design for enhanced Repeatable results can only be achieved by a process cycle that Power supply voltage: 230V, 50/60 Hz
considers all the parameters of the repair operation. The ‘Teach-in’ Mains fuse: T10A
precision feature provides a quick and easy method of determining process
The WQB 4000SOPS is modularly Power: 2300W
cycle parameters and identifying critical points - without the need
built with a slide platform, advanced for in-depth operator knowledge. The software includes a library of Top heater: 700W
patented systems and materials of the soldering profiles, i.e. general and specific parameters enabling Bottom heater:
highest quality to guarantee industrial repeatable use. New profiles can be edited easily by the user and large 1600W (260 x 260) mm
added to the library. small 400W (120 x 120) mm
reliability and long-lasting durability. • Perfect component/circuit board alignment Compressed-air supply:
With the split optic camera, live images of a component and a 400-600 kPa purified, dry compressed air
circuit board can be aligned independently of each other using the Compressed-air converter:
x, y and theta axis fine adjustment drives.
1. Component size & theta axis vacuum 60 kPa
2. Align y axis Temperature control:
3. Align x axis infinitely variable 50°C - 400°C
4. Component aligned! control precision ± 10°C
• Removal (desoldering) of the defective component Flow control:
The ability to preheat the circuit board and a temperature/time infinitely variable 5-50 l/min.
controlled process are critical for good reflow of the solder joints. Air consumption: 60-100 l/min. (4 bar)
At the end of the reflow cycle, to avoid damage to the solder pads,
a vacuum lift automatically removes the component from the board Total weight: approx. 40kg
with minimum force and exact temperature control.
s • Cleaning of the circuit board
Residual solder should be removed from the board with a
desoldering iron or desolder wick. Residual contaminants can be
Heating from above: selective removed with a suitable solvent spray.
and sensitive • Positioning of the new component
The hot gas heater with patented nozzle The new WQB4000SOPS station’s split optic camera placement
system ensures precise positioning of a wide range of components
system, coupled with digital control elec- - from BGA to fine pitch SMT.
It is a comprehensive,
tronics for user-friendly
temperature system
monitoring and • Component soldering
for the removal and soldering of BGA
components,regulation of risk
without the theofairthermal
flow rate, facilitates Reflow of the replaced component is essentially a repeat of the
damage tothe thefinely metered
component supply
or circuit of heat to the
board. removal process, without the vacuum lift being initiated at the end
components. A temperature sensor placed of the profile. An extensive range of hot gas nozzles and adapters
are available to cater for the many body sizes of BGA devices or
directly in the hot gas nozzle prevents Heating QFP
fromand below:
PLCC packages. Optimized ease of use
thermal overload of the component and rapid and homogeneous
• Temperature profiling Everything about the new WQB 4000SOPS
efficiently regulates the top heater, provi- An eight-step temperature
The temperature-regulated two-zoneprofile enables has soldering and coolingand designed for
been engineered
ding maximum process control. that areheater
infrared bottom perfectly tailored
provides to specific requirements.
rapid, ease of use and superb results – from its
• Split Optics for perfectly
yet precisely controlled warm-up at accurate positioning
advanced, user-friendly software all the way
The new SOPS (Split Optic Positioning System) with the high-
homogeneous substrate
resolution temperatures.
2 Mpix CMOS USB 2.0 camera enablesthroughaccurate
to its many supportive details, such
as the SoftStart
positioning of the components following desoldering. feature.
It works with
a single camera and two-colour lighting for exact positioning.
Superb image quality at high dynamics and very low image noise
ensure precise, ergonomic component mounting.
• An ever expanding field of applications
The new WQB4000SOPS is optimally equipped to take on repair
and rework in mobile communications, research and general BGA.
QFP work. Specifically, with PBGA, CBGS, CCGA, CSP’s, Micro
BGA, QFN, PLCC, SOP and PGA components.
1. Components without direct access to the solder joint
2. Leaded components with external solder joints
3. A wide variety of special modules.

Split Optics for perfectly accurate

22
positioning Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
The new SOPS (Split Optic Positioning
 REPAIR/REWORK BGA/QFP STATIONS

Accessories for WQB4000SOPS

Description Material No. Shelf
Pack
Clamping Set/Irregular Board Holder for Circuit T0058754924 1
Boards
• ROHS & WEEE Compliant

Support for Large Sized Circuit Boards T0058755745 1

• ROHS & WEEE Compliant

Thermocouple Type K, 0.5mm T0053119099 1

NQ Nozzle Adapter T0058754970 1

Adapter T0058747770 1

Vacuum Inserts - 4.5mm, 10pc T0058713799 1

• ROHS & WEEE Compliant

Vacuum Inserts - 10mm, 10pc T0058713798 1

• ROHS & WEEE Compliant

Temperature Sensor for Top Heater T0058754948 1

• ROHS & WEEE Compliant

Circuit Board Block T0058754873 1

• ROHS & WEEE Compliant

Serial Interface Cable T0053119199 1

• ROHS & WEEE Compliant

Suppressing device for Circuit Boards T0058755741 1

• ROHS & WEEE Compliant

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 23
 TIPS & NOZZLES

Replacement Soldering Tips

PT SERIES Suit WTCPS/T stations and TC series soldering pencils.

Description Tip Size Reach Material No. Shelf

mm mm Pack
600°F (315°C) 700°F (371°C) 800°F (427°)

Screwdriver 1.6 15.9 PTA6 PTA7 PTA8 1

Single flat 1.6 15.9 PTAA6 PTAA7 PTAA8 1

Screwdriver 2.4 15.9 PTB7 PTB8 1

Single flat 2.4 15.9 PTBB6 PTBB7 PTBB8 1

Screwdriver 3.2 15.9 PTC6 PTC7 PTC8 1

Single flat 3.2 15.9 PTCC7 PTCC8 1

Screwdriver 4.7 15.9 PTD7 PTD8 1

Single flat 4.7 15.9 PTDD7 1

Screwdriver 6.0 15.9 PTE6 PTE8 1

Conical flat 1.2 15.9 PTF7 PTF8 1

Screwdriver 0.8 15.9 PTH6 PTH7 PTH8 1

Long Screwdriver 1.2 25.4 PTK7 PTK8 1

Long Screwdriver 2.0 25.4 PTL7 PTL8 1

Long Screwdriver 3.2 25.4 PTM7 PTM8 1

Long conical 0.8 25.4 PT07 PT08 1

Conical 0.8 15.9 PTP7 PTP8 1

Narrow 1.6 15.9 PTR6 PTR7 PTR8 1

Screwdriver

Long conical 0.4 25.4 PTS6 PTS7 PTS8 1

Bent slotted 0.8 - PTX6 PTX7 PTX8 1

Bent slotted 0.5 - PTZ6 PTZ7 1

24 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 TIPS & NOZZLES

Replacement Soldering Tips

ET SERIES
Suits EC1000/2000 WES50, WES51, WESD51 stations fitted with EC1201A, WSP50 and WSP51, PES50 & PES51 soldering pencils.

Description Tip Size Reach Material No. Shelf

mm mm Pack

Screwdriver 1.6 15.9 ETA 1

Single flat 1.6 15.9 ETAA 1

Screwdriver 2.4 15.9 ETB 1

Single flat 2.4 15.9 ETBB 1

Screwdriver 3.2 15.9 ETC 1

Single flat 3.2 15.9 ETCC 1

Screwdriver 4.7 15.9 ETD 1

Single flat 4.7 15.9 ETDD 1

Screwdriver 0.8 15.9 ETH 1

Screwdriver 0.4 25.4 ETJB 1

Long Screwdriver 1.2 25.4 ETK 1

Knife Tip 45° Angle ETKN 1

Long Screwdriver 2.0 25.4 ETL 1

Blunt ETLB 1

Long Screwdriver 3.2 25.4 ETM 1

Long conical 0.8 25.4 ETO 1

Conical 0.8 15.9 ETP 1

Narrow Screwdriver 1.6 15.9 ETR 1

Long conical 0.4 25.4 TETS 1

Conical 0.6 15.9 ETT 1

Single flat 0.4 17.8 ETUB 1

Single flat 0.6 17.8 ETVX 1

Mini Wave for J Leads and Gullwings ETGW

EPH SERIES Suits EC3001 Stations/EC1301, EC1302A, EC1302B Soldering Pencils

Description Tip Size Reach Material No. Shelf

mm mm Pack

Micropoint 0.4 11.1 EPH101 1

Bent Conical 0.8 EPH102 1

Single flat 0.8 7.9 EPH103 1

Bent conical 1.2 11.1 EPH104 1

Screwdriver 1.6 11.1 EPH106 1

Chisel 2.0 11.1 TEPH107 1

Conical 0.8 11.1 EPH109 1

Conical 1.6 11.1 EPH110 1

Long micropoint 0.4 15.9 EPH112 1

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 25
 TIPS & NOZZLES

Replacement Soldering Tips

LT Tip Selection Chart to suit WSP80/WP80

Material No. Style Size 1 Size 2 Reach

LT1 Round 0.25 - 12.5

LT1L Round 0.2 - 25

LT1LX Bent Round 0.2 - 25

LT1S Round 0.2 - 15

LT1SLX Bent Round 0.4 - 20.5

LT1X Bent Round 0.4 - 20.5

LT4AU Single Flat 1.2 - 15

LTA4X Bent Chisel 1.2 0.16 16.5

LTA Chisel 1.6 0.2 12.5

LTAS Round 1.6 - 12.5

LTAX Bent Chisel 1.6 0.8 14

LTB Chisel 2.4 0.8 12.5

LTC Chisel 3.2 0.8 12.5

LTCS Round 3.2 - 12.5

LTD Chisel 4.6 0.8 12.5

LTGW Gull Wing 3.2 - 17.8

LTF Single Flat 1.2 - 12.5

LTH Chisel 0.8 0.4 12.5

LTHX Bent Chisel 0.6 0.2 20

LTK Chisel 1.2 0.4 20

LTKN Knife (J-Lead) 1.5 0.8 20

LTL Chisel 2.0 1.0 20

LTM Chisel 3.2 1.2 20

LTS Round 0.4 - 20

W K111 Type K
NE Thermocouple Weld, LTB

T0054441799 LT Adapter

T0054441600 Measuring/Calibration Tip

T0054449599 LT Soldering Tip Set

Contains 1 of each LT
Tip - 40 Tips in convenient
labelled stand

T0058744845 Short Barrel 40mm

W
NE
T0058744846 Long Barrel 68mm
W
NE
T0054448699 LTDD Soldering Tip 4.6mm
W
NE

26 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 TIPS & NOZZLES

Replacement Soldering Tips

NT Tip Selection Chart to suit WMP Pencil

Description Width A Thickness Length C Material No.

B

Soldering Tips
Chisel Tip 0.8mm 0.4mm 8.4mm NTH

Chisel Tip 1.2mm 0.4mm 8.4mm NTK

Chisel Tip 1.6mm 0.4mm 8.4mm NTA

for micro soldering pencil WMP
Chisel Tip 1.6mm 0.4mm 9.5mm NT6

Chisel Tip 2.4mm 0.8mm 7.4mm NTB

Chisel Tip 3.2mm 0.8mm 7.8mm NTC

Chisel Tip 4.0mm 0.8mm 7.8mm NTD

Chisel Tip, Bent 0.4mm 1.6mm 8.2mm NTAX

Round Tip, Bent 1.6mm 0.8mm 8.6mm NT1X

Round Tip 0.25mm - 7.4mm NT1

NT-Tip

Round Tip, Small 0.25mm - 8.5mm NT1S

Description Width A Thickness B Length C Type/Order No.

Chisel tip 0,4 mm 0,15 mm 14,0 mm NT 1SC

W
NE Chisel Tip 0,8 mm 0.4mm0,4 mm 0.14mm 8,48.4mm
mm NT NT1SC
H
1,2 mm 0,4 mm 8,4 mm NT K
1,6 mm 0,4 mm 9,5 mm NT A
1,6 mm 0,4 mm 7,4 mm NT 6
Round Tip, Sloped 45° 1.2mm - 9.9mm NT4
2,4 mm 0,8 mm 7,8 mm NT B
3,2 mm 0,8 mm 8,2 mm NT C
4,0 mm 0,8 mm 8,6 mm NT D
Gull Wing 2.0mm 3.0mm 13.4mm NTGW
Chisel tip, bent 1,6 mm 0,4 mm 8,2 mm NT AX
Round tip, bent 45° Ø 0,4 mm 8,6 mm NT 1X

Round tip Ø 0,25 mm – 7,4 mm NT 1

RTW Tip Selection Chart to suit WMRT thermal tweezer

Round tip slim Ø 0,25 mm – 8,5 mm NT 1S

Cat No. Dimensions Style Single product code

Round tip, sloped Ø 1,2 mm – 9,9 mm NT 4
Width 1 Width 2 Length OA Material No.
45°

Gull wing RTW1 0.2mm

2,0 mm 3,0 mm Tweezer
13,4 mm tip T0054465199
NT GW

NT Measuring tipRTW2 Ø0.7mm

0,5 mm – – Tweezer tip T0054465299
NT MS
for thermo element

RTW3 3mm Tweezer tip T0054465399

RTW4 6mm Tweezer tip T0054465499

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 27
 TIPS & NOZZLES

Replacement Soldering Tips

WSP150 SERIES

Description Tip Size Material No. Shelf

mm mm Pack

LHT-C Chisel Tip 3.2 T0054445599 1

LHT-D Chisel Tip 4.7 1.8 T0054445299 1

LHT-E Chisel Tip 6.7 1.8 T0054445199 1

LHT-F Chisel Tip 9.3 1.8 T0054445099 1

LHT Measuring Tip T0054445399 1

LHTDX Bent Chisel Tip 5.0 2.0 T0054446200 1

LHTEX Bent Chisel Tip 7.0 2.0 T0054446100 1

LHTFX Bent Chisel Tip 10.0 2.0 T0054446000 1

RT SERIES to suit WMRP pencil

Description Tip Size Material No. Shelf

mm mm Pack

RT1 Needle Tip 0.2 T0054460199 1

RT1C Chisel Tip 0.4 0.15 T0054461299 1

RT2 Point Tip 0.8 T0054460299 1

RT3 Chisel Tip - Straight 1.3 0.4 T0054460399 1

RT4 Chisel Tip - 1.5mm thick 1.5 0.4 T0054460499 1

RT5 Chisel Tip, bent, 30° 0.8 0.4 T0054460599 1

RT6 Round Tip, bevelled, 45° 1.2 T0054460699 1

RT7 Knife Tip, sloped, 45° 2.2 T0054460799 1

RT8 Chisel Tip 2.2 0.4 T0054460899 1

RT9 Chisel Tip 0.8 0.4 T0054460999 1

RT10GW Gull Wing 1.2 2.0 T0054461099 1

RT11 Chisel Tip 3.6 0.9 T0054461199 1

RT Measuring Tip T0054461399 1

28 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 TIPS & NOZZLES

Replacement Soldering Tips

MT SERIES to suit MT1500D Soldering Station

Description Material No. Shelf

Pack

Standard Tips Conical Needle, .030 Calibration Tip MT202 1

WELLER NEWS No.1 / Seite 2 von 2
Conical Sharp, 0.16 x 530L MT302 1
Weller Info No. 15 / Page 2 of 2 April 29, 2008
WELLER NEWS No.1 / Seite 2 von 2 Conical Sharp, .020 x 530L MT606 1

Conical Bent Conical Bent, 30 Deg. .015 x 320L MT303 1

Weller Info No. 15 / Page 2 of 2 April 29, 2008
Technical Data
Conical Bent, 30 Deg.WD.020 x1000HPT
600L MT603 1
Dimensions (L x W x H mm): 134 x 108 x 147
Conical Bent (Sharp) 30 Deg. .016 x 560L *MT605 1
Mains voltage supply: 230 V / 120 V / 50/60 Hz
Technical Data WD 1000HPT
Bevel Power:
Bevel, 30 Deg., .020 Dia. x .580 160W MT607 1
Dimensions (L x W x H mm): 134 x 108 x 147
Safety class:
Bevel, 30 Deg., .040 Dia. x .560 I (power unit), III (soldering
*MT608 1 iron)
Mains voltage supply: 230 V / 120 V / 50/60 Hz
Temperature control: 50°C – 450°C (150°F – 850°F)
Screwdriver Power:
Screwdriver, .045 W x .005 THK x 1.0L non wet160W MT211 1
Temperature
Safety class: accuracy: ±
I 9°C (± unit),
(power 17°F)III (soldering iron)
Screwdriver, .045 W x .005 THK x 1.0L non wet MT212 1
Temperature
Temperature stability:
control: ± 5°C–(±450°C
50°C 9°F) (150°F – 850°F)
Soldering tip leakage
Screwdriver,
Temperature
.047 x 200L
accuracy: resistance:< 2 Ω (±
± 9°C (tip-to-ground)
MT301
17°F)
1
Soldering
Temperature tip.070
Screwdriver, leakage
stability:
x 385L current: ± < 5°C
2 mV(±(tip-to-ground)
9°F)
MT601 1

Soldering tip.100
Screwdriver, leakage
x 390L resistance:< 2 Ω (tip-to-ground)
*MT602 1
Soldering tip leakage
Screwdriver, .200 x 350L
current: < 2 mV (tip-to-ground)
*MT610 1

Surface Mount Tips PLCC’S Quad PLCC-44, .70 SQ., Flex Leg MT1203F 1

ScopeQuad
ofPLCC-68,
delivery1.000 soldering
SQ., Flex Leg kit WD 1000HPT
MT1208F 1

Quad PLCC-18, .335 x 535 *MT1212 1

ScopeQuad of PLCC-28,
delivery soldering kit WD 1000HPT
.500 SQ. *MT1201 1
Power unit WD 1M
Soldering
Quad PLCC-32, .500 x 600 iron WP 120 *MT1204 1

SIP SIP (Blade) .410LSafety

Power unit
rest WDH 10T MT617
WD 1M 1

CHIP CHIP 1206/1210,Soldering

.135W x .070L iron WP 120 *MT618 1
Safety rest WDH 10T
Order-no.:
CHIP SOT 23, 068W 005 34 166 99
x .100L *MT624 1
Order-no. UK: 005 34 163 99
Order-no. USA: WD1000HPT (available August 2008)
Order-no.: 005 34 166 99
W
Order-no.
XT SERIES to suit WP120 Soldering PencilUK: 005 34 163 99
NE Order-no. USA: WD1000HPT (available August 2008)
XT-tips for WP 120
Description Width Height Length Material No. Shelf
mm mm mm Pack
Order no
XT-tips for Model Type Width Height Length
XTAL Chisel 1.6 WP 120
1.0 39 T0054470199 1
005 44 701 99 XT AL Chisel 1,6 mm 1,0 mm 39 mm
XTM Chisel 005 44no
Order 702
3.2 99 XT1.2 M
Model Chisel
39
Type 3,2 mm
T0054470299
Width 1,2 mm
Height
1 39 mm
Length
XTA Chisel
005 44 703
005 44 701 99 XT
1.6 99 XT
A
0.7 AL
Chisel
Chisel
36
1,6 mm
1,6T0054470399
mm 0,7 mm
1,0 mm 1
36 mm
39 mm
005 44 704
005 44 702 99 XT
99 XT B
M Chisel
Chisel 2,4 mm
3,2T0054470499
mm 0,8 mm
1,2 mm 36 mm
39 mm
XTB Chisel 2.4 0.8 36 1
005
005 44 703 99 XT C
44 705 99 XT A Chisel
Chisel 3,2 mm
1,6 mm 0,8 mm
0,7 mm 36 mm
36 mm
XTC Chisel 005
005 44
44 706
3.2 99
704 99 XT0.8 D
XT B Chisel
Chisel
36 4,6 mm
2,4T0054470599
mm 0,8
0,8 mm
mm 1 34,5
36 mmmm
005
005 44
44 707
705 99
99 XT
XT E C Chisel
Chisel 5,9 mm
3,2 mm 1,2 mm
0,8 mm 34,5
36 mmmm
XTD Chisel 4.6 0.8 34.5 T0054470699 1
005 44 706 99 XT D Chisel 4,6 mm 0,8 mm 34,5 mm
XTE Chisel 5.9 1.2 34.5 T0054470799 1
005 44 707 99 XT E Chisel 5,9 mm 1,2 mm 34,5 mm

Published by
Author:
Marketing,
Published Besigheim
by
Contact:
Author:
Stephan
Marketing, Hofmann
Besigheim Phone: +49 (0) 7143 580 145
Global Product Manager Electronic Fax: +49 (0) 7143 580 113
Contact: Stephan.Hofmann@CooperIndustries.com
Stephan Hofmann Phone: +49 (0) 7143 580 145
Cooper Tools GmbH
Global Product Manager Electronic Fax: +49 (0) 7143 580 113
Carl Benz Str. 2 Stephan.Hofmann@CooperIndustries.com
D-74354 Besigheim
Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 29
Cooper Tools GmbH Copyright © 2008, Cooper Tools GmbH
 TIPS & NOZZLES

Replacement Soldering Tips

WT SERIES to suit WT-50 Thermal Tweezers

Strip Size Tip “x” Material No. Shelf

Size mm Pack
mm
0405-1805, SOD80, MELF 1.0 11.0 WTA-1 T0054414199 1pr

WTA-2 1808-1812, SOD87, SOT23, SOD89 3.0 11.0 WTA-2 T0054414699 1pr

SOT192, SO4-SO 6.0 11.0 WTA-3 T0054414799 1pr

WTA-3 SO14, SO16, SOJ14, SOJ16 12.5 10.0 WTA-4 T0054414399 1pr

SO20, SO20L, SOJ20 18.5 12.0 WTA-5 T0054414499 1pr

VERTICAL USE 1.0 WTA-11 T0054415299 1pr

VERTICAL USE 3.0 WTA-12 T0054415399 1pr

WTA-11

NOZZLES to suit WQB2000 and WQB3000

Nozzle Housing Nozzle Housing Material No. Shelf

Inside mm x mm Outside mm x mm Pack
7.6 x 7.9 8.6 x 8.9 T0058747947 1

6.5 x 6.5 7.5 x 7.5 T0058747943 1

8.5 x 8.5 9.5 x 9.5 T0058747945 1

8.5 x 10.6 9.5 x 11.6 T0058747961 1

10 x 10 11 x 11 T0058754967 1

12 x 12 13 x 13 T0058747848 1

13.5 x 13.5 14.3 x 14.3 T0058747904 1

15.5 x 15.5 16.5 x 16.5 T0058747935 1

15 x 11 16 x 12 T0058747893 1

18.5 x 10 19.5 x 11 T0058754836 1

15.5 x 23.5 16.5 x 24.5 T0058747977 1

18 x 18 20 x 20 T0058747833 1

21 x 21 23 x 23 T0058754770 1

22 x 22 24 x 24 T0058754820 1

25 x 25 27 x 27 T0058747764 1

27 x 23 29 x 25 T0058747993 1

27 x 27 29 x 29 T0058747850 1

29 x 29 31 x 31 T0058747927 1

28 x 32 30 x 34 T0058747999 1

33 x 33 35 x 35 T0058747906 1

35 x 35 37 x 37 T0058754887 1

37 x 37 39 x 39 T0058747753 1

39.5 x 39.5 41.5 x 41.5 T0058747871 1

42 x 42 44 x 44 T0058747874 1

45 x 11 47 x 13 T0058754903 1

45 x 26 47 x 28 T0058754905 1

46 x 46 48 x 48 T0058747763 1

47 x 47 49 x 49 T0058747916 1

49 x 49 51 x 51 T0058747941 1
57 x 18.5 59 x 20 T0058747985 1

55 x 45 57 x 47 T0058755749 1

Adaptor T0058747770 1

Adaptor QFP Nozzles T0058754970 1

30 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 TIPS & NOZZLES

Replacement Soldering Tips

WPT0 SERIES PYROPEN TIPS, Suit WSTA6 Auto Ignition Jr.

Description Tip Size Material No. Shelf

mm Pack

Taper 1.0 WPT01 1

Screwdriver 2.4 WPT02 1

Chisel 2.0 WPT03 1

Screwdriver 5.0 WPT04 1

Nozzle 1.5 WHC0150 1

Nozzle 4.7 WHC0152 1

WPT SERIES PYROPEN TIPS, Suit WST2 Junior

Description Tip Size Material No. Shelf

mm Pack

Tapered Needle 0.5 WPT15 1

Chisel 3.0 WPT16 1

Spade 3.0 WPT17 1

Hot Blow 1.5 WHC54 1

Hot Blow 4.9 WHC55 1

REPLACEMENT TIPS JUMBO PYROPEN WSTA5

Description Tip Size Material No. Shelf

mm Pack

Conical 3mm 720101AU 1

Chisel 2mm 720102 1

Spade 4mm 720103 1

Conical 2mm 720105 1

Spade 4mm 720106 1

Pyramid 2mm 720107AU 1

Flat 3mm 720113 1

Hot Blow 4mm 720151 1

Hot Blow 6mm 720152 1

Hot Blow 10mm 720153 1

Small Heat Shrink 720154 1

Large Heat Shrink 720155 1

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 31
 TIPS & NOZZLES

Replacement Soldering Tips

WPT SERIES PYROPEN TIPS, Suits WSTA3 and WPA2

Description Tip Size Material No. Shelf

mm Pack

Taper - WPT1 1

Chisel 2.0 WPT2 1

Spade 2.0 WPT3 1

Spade 45° 3.0 WPT4 1

Taper Needle - WPT5 1

Micro Spade 2.0 WPT6 1

Square Taper Pyramid 0.5 WPT7 1

Spade 35° 2.0 WPT8 1

Spade 35° 3.0 WPT9 1

Offset Tapered Needle 1.0 WPT10 1

Chisel 8.0 WPT11 1

Round Head Needle 3.0 WPT12 1

Long Tapered Needle 5.0 WPT13 1

Threaded Tip Base - WPT14 1

Hot Blow 2.5 ID WHC50 1

Hot Blow 3.3 ID WHC51 1

Hot Blow 4.9 ID WHC52 1

Hot Blow 7.4 ID WHC53 1

Heat Shrink Attachment Long WAR54 1

Heat Shrink Attachment Small WAR55 1

PSI SERIES PORTASOL TIPS Suit PSI-100 Irons

Description Tip Size Material No. Shelf

mm Pack

Single Flat 1.0 PSI1 1

Single Flat 2.4 PSI2 1

Single Flat 3.2 PSI3 1

Single Flat 4.8 PSI4 1

Single Flat 1.0 PSI5 1

Double Flat 2.4 PSI6 1

Double Flat 3.2 PSI7 1

Double Flat 4.8 PSI8 1

Hot Blow - PSI9 1

Hot Knife - PSI10 1

32 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 TIPS & NOZZLES

Replacement Desoldering Tips

DS SERIES TIPLETS Suit DS102, DS651, DS1201, Tools and DS650 Station/DS80UNC/DSV80

Description Tip Size Material No. Shelf

mm mm mm Pack

DS110 0.63 1.52 12.7 DS110 1

DS111 0.63 DS111 1

DS112 0.91 1.93 12.7 DS112 1

DS113 1.16 2.48 12.7 DS113 1

DS114 1.80 3.25 12.7 DS114 1

DS115 0.63 DS115 1

DS116 1.14 2.48 19.05 DS116 1

DS117 0.63 2.28 19.05 DS117 1

DS118 DS118 1

DSH SERIES TIPLETS Suit DS1203A Tools and WDD80V/DS80UNC/DSV80

Description Tip Size Material No. Shelf

mm mm mm Pack

DS119 0.63 2.48 19.05 T0051352700 1

DSX SERIES CAM LOCK TIPS

Description Outside Inside Length Material No. Shelf

Ø Ø a Pack

DX110 NOZZLE 1.9 0.7 23 T0051314000 1

DX111 NOZZLE 2.5 0.7 23 T0051314100 1

DX112 NOZZLE 2.3 1.0 23 T0051314200 1

DX113 NOZZLE 2.5 1.2 23 T0051314300 1

DX113HM NOZZLE with improved 2.5 1.2 23 T0051315000 1

thermal transfer

DX114 NOZZLE 3.3 1.8 23 T0051314400 1

DX115 NOZZLE 1.9 0.7 27 T0054460199 1

DX116 NOZZLE 2.7 1.2 27 T0051314600 1

DX117 NOZZLE 2.9 1.5 23 T0051314700 1

DX118 NOZZLE 1.5 0.7 23 T0051314800 1

DX119 Needle tiplet with non wettable 1.1 0.7 31 T0051315100 1

stainless steel tube for removal of
solder bridges in connection with hot
air pencil

DX120 NOZZLE without inside tube for 2.5 1.1 22 T0051315200 1

cleaning sMD pads

DX MEASURING 3.3 0.55 21.5 T0051315399 1

Measuring nozzle

DX Cleaning Tool (Conus insert clean- T0058706794 1

ing tool)

Nozzle Set DX110-DX115 T0051379099 1

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 33
 TIPS & NOZZLES

Replacement Soldering Tips

CT5 SERIES Suits W60D Soldering pencil

Description Tip Size Reach Material No. Shelf

mm mm Pack
600°F (315°C) 700°F (371°C) 800°F (427°C)

Screwdriver 1.6 29.36 CT5A7 CT5A8 1

Spade 1.6 19.00 CT5AA6 CT5AA7 CT5AA8 1

Screwdriver 2.4 29.36 CT5B7 CT5B8 1

Spade 2.4 19.00 CT5BB6 CT5BB7 1

Screwdriver 3.2 29.36 CT5C6 CT5C7 CT5C8 1

Spade 3.2 19.00 CT5CC6 CT5CC7 CT5CC8 1

Screwdriver 4.8 29.36 CT5D7 CT5D8 1

Spade 4.8 19.00 CT5DD7 CT5DD8 1

Screwdriver 6.35 29.36 CT5E7 1

Spade 6.35 19.00 CT5EE7 1

CT6 SERIES Suits W100D Soldering pencils

Screwdriver 3.18 37.3 CT6C6 CT6C7 CT6C8 1

Soldering Irons and Tips Screwdriver 4.76 37.3 CT6D6 CT6D7 1

Screwdriver 6.35 37.3 CT6E6 CT6E7 CT6E8 1

Magnastat Controlled Line Voltage Soldering Irons / Unregulated Line Voltage Soldering Irons
Screwdriver 9.52 37.3 CT6F6 CT6F7 CT6F8 1

Welding Mirror (50 x 40 x 4) teflon coated T0051176799

Order No. Model Description Price (€)

005 61 056 99 W 201 Line voltage soldering iron 200 W, 230 V, 98,00
Magnastat
CT2 SERIES Suits W201 Soldering Iron
controlled
• complete with soldering tip CT2 F7 and safety rest

Screwdriver 7.0 - T0054240799 T0054240899 1

(CT2E7, CT2E8)

Soldering Tips for W 201

Screwdriver 10.0 - T0054241799 T0054241899 1
(CT2F6, CT2F7, CT2F8)
W
NE Order No.
Screwdriver Model 11.0 Description
425° Width A T0054242899 Price (€) 1
005(CT2G8)
42 407 99 CT2 E7 Chisel tip 370°C 7,0 mm 16,90
005 42 408 99 CT2 E8 Chisel tip 425°C 7,0 mm 16,90

005 42 417 99 CT2 F7 Chisel tip 370°C 10,0 mm 16,90

005 42 418 99 CT2 F8 Chisel tip 425°C 10,0 mm 16,90

005 42 428 99 CT2 G8 Chisel tip 425°C 11,0 mm 16,90

005 42 507 99 CT2 EX7 Chisel tip bent 370°C 7,0 mm 16,90
005 42 508 99 CT2 EX8 Chisel tip bent 425°C 7,0 mm 16,90

005 42 517 99 CT2 FX7 Chisel tip bent 370°C 10,0 mm 16,90
34 Note: Some of the above items may require a freight lead time. Product depictions are not to scale.
005 42 518 99 CT2 FX8 Chisel tip bent 425°C 10,0 mm Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
16,90
 TIPS & NOZZLES

S.M.T. Soldering and Desoldering Accessories

HOT AIR NOZZLES FOR HAP1 Hot Air Pencil

Description Material No. Shelf

Pack

F02 Flat Nozzle 8 x 1.5mm T0058727774 1

F02
F04 Flat Nozzle 10 x 1.5mm T0058727773 1

F04
F06 Flat Nozzle 12 x 1.5mm T0058727772 1

R01 Calibrating Nozzle T0058727808 1

R01

R10 Straight Nozzle 2.5mm diam. T0058727787 1

R10 R02 Nozzle 0.8mm diam. T0058727823 1

R04 Nozzle 1.2mm diam. T0058727821 1

R04

R06 Nozzle 3.0mm diam. T0058727822 1

R08 R08 Bent Nozzle 2.5mm diam. T0058727786 1

FD2 Dual Nozzle 1.5mm diam. x 8mm T0058727776 1

FD4
FD4 Dual Nozzle 1.5mm diam. x 10mm T0058727775 1

Q04 Q02 Nozzle 6 x 6.5mm T0058727777 1

Q04 Nozzle 6 x 9mm T0058727778 1

Q06
Q06 Nozzle 15 x 10mm T0058727780 1

D06 Q08 Nozzle 12.5 x 15mm T0058727783 1

Q10 Nozzle 18 x 18mm T0058727785 1

D08
D06 Nozzle 10 x 13mm T0058727782 1

D08 Nozzle 15 x 10mm T0058727781 1

D10
D10 Nozzle 10 x 18mm T0058727784 1

C.S.F. SERIES TIPLETS suits most Weller desoldering tools

Description Width x Length Material No. Shelf

Pack

CSFD2 SO 5.8 x 10.5mm CSFD2 1

CSFQ1 QFP 17 x 17mm CSFQ1 1

CSFQ2 QFP 17 x 23mm CSFQ2 1

Many NEW stock sizes available. Also adaptors to suit all Weller and some other brand desoldering tools.

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 35
 TIPS & NOZZLES

S.M.T. Soldering and Desoldering Accessories

HOT AIR NOZZLES FOR WHA300/1000/2000 Stations

Description Material No. Shelf

Pack
NR02 1.7mm diam. 45° bend. Hot blow only T0058736882 1

NR04 2.5mm diam. straight. Hot blow only T0058736881 1

DR05 2 x 2.5mm 9.5mm ctrs. Hot blow only T0058736883 1

NR02
NR05 4mm diam. straight. Hot blow only T0058736867 1

NR10 0.7mm T0058736870 1

ND05 10.8 x 7mm SO14, SO16 T0058736843 1

DR05
ND10 14 x 10mm SOL14, SOL16, SOL16-J, SOL20, SOL-J20 T0058736842 1

ND15 19 x 12mm SOL24, SOL-J24, SOL-28, SOL-J28 T0058736841 1

ND20 21.5 x 14.8mm SOL 32 T0058736840 1

ND10
NQ05 10.7 x 10.7mm PLCC20, LCCC14, LCCC24, C-QFP24 T0058736839 1

NQ10 14.8 x 14.8mm PLCC28, QFP44, LCCC28, QFP48 T0058736818 1

NQ15 14.5 x 10mm PLCC32R T0058736838 1

NQ35
NQ20 15.5mm x 13mm T0058736837 1

NQ25 18 x 18mm PLCC44, CLCC44, PQFP44, PQFP60, QFP64, QFP60, T0058736814 1

TSOP100, QFP100
ND20
NQ30 17.5 x 23.5mm QFP56, QFP60, QFP64, QFP80, QFP88, QFP100 T0058750721 1

NQ35 20.5 x 20.5mm PLCC52, BQFP84 T0058736807 1

NQ40 26 x 26mm C-QFP64, PLCC68, CLCC68 T0058736804 1

NQ25
NQ45 31.3 x 31.3mm CLCC84, PLCC84, QFP100, QFP120, QFP128, T0058736833 1
QFP132, QFP136, QFP144, QFP160,
C-QFP80, BQFP164, BQFP132, MQUAD208L,
MQUAD184L, MQUAD144L, QFP208

NQ45 NQ50 36 x 36mm QFP240 T0058736891 1

NQ55 43 x 43mm CQFP304 T0058736890 1

NA20 Measuring Nozzle T0058736875 1

S.M.T. TIPLETS suits WTCPS/T and EC Stations with EC1201 pencils WES50D and WSP80 Stations

Description Chip Size Material No. Shelf

Pack

0705 1.8 x 1.3 x 1.0 SMT0805B 1

0805 2.0 x 1.3 x 1.3 SMT0805B 1

Small Outline I.C.

SMT8K SO8 5.0 x 4.0 x 1.7 SMT8K 1

Adaptors

SMTA (WSP80) T0054441799 1

36 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 FUME EXTRACTION

Fume Extraction
Many work environments today, including soldering, adhesives, welding and laser applications, create particles and gases that can be harmful to the work place and
the environment. Most people thought that the move to lead-free soldering would be more nature friendly. In reality lead-free soldering smoke emissions contain

Zero-Smog® System
more breathable fine dust particles. More and smaller particles are produced due to the higher working temperatures required and because more flux is used in the
soldering process.

Zero-Smog® System
In many countries legal regulations governing clean air in the work place require that hazardous substances are removed from the air in order to avoid harmful effects
on people and machines.

It is important to use the correct safety equipment to remove these hazardous substances. Fine particles are more dangerous to inhale than big particles as they get
caught more easily and block the alveoli in the lungs.

Weller Zero-Smog Systems

® separate these particles
To protect the operator it is important to use an extraction system that is able to ® and gases and then
re-circulates the cleaned air back into the work place. This saves energy and reduces energy costs.
offer two solutions®for fume
Weller ®
Zero-Smog
extraction: Systems
offer two solutions for fume
Weller® Zero-Smog® Systems offer two solutions for fume extraction:
extraction:
Tip Extraction
Tip Extraction
Tip Extraction
Tip Extraction
Weller® FE (Fume Extraction) soldering irons have a smoke tube integrated into
the handle. When soldering the tube is positioned directly above the joint and
collects any fumes produced. Fume extraction attachments can be retro fitted to
non fume extraction Weller® soldering irons.

• Less investment per work place

• Collect pollution direct at source
• Up to 20 collection points
with one system (200 m apart)
• Ergonomic friendly
with easy access to work place
• No noise
• Minimal air movement

Volume Extraction
Volume Extraction
Volume Extraction
Volume Extraction
More suitable for applications involving, for example, solder baths, hot air
soldering, micro solders and gluing work. Weller® offers various mobile
systems that purify the air at up to a maximum of 8 workplaces.

• Larger areas can be covered

• Low maintenance
• Mobile
• Quick & easy installation
• Economic for 1 to 8 work places
• Remote control

 packs attract a 5% Surcharge. Prices herein do not include GST.

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf 37
 FUME EXTRACTION

Filter Technology
Filter
Filter Technology
Technology
Weller® Zero-Smog® Systems are specifically 1. The hazardous substances are efficiently Filter Class Recommended Application
WellerZero-Smog
Weller ®
Zero-Smog®Systems
®
are specifically
Systems are specifically
designed for continuous operation in industrial
® 1. The hazardous
1. captured
The hazardous substances
by thesubstances
nozzle andare areefficiently
are absorbed
designed for continuous operation in industrial efficiently captured by the nozzle and FFilter
5 Class Recommended
for Application
standard applications
Filter Technology
designed for continuous operation in industrial
environments. Care and attention at the design
environments. Care and attention at the design
captured
into by the nozzle and are absorbed
the filter.
are absorbed into the filter. F5 for standard applications
environments. Care and attention at the design
stage plus careful component choice and a
stage plus careful component choice and a high 2.
into theparticles
. Bigger filter. get
Bigger particles get caught
caughtin inthe
thepre-
pre- F7 for applications with high
stage plus careful component choice and a
high quality manufacturing process have given
quality manufacturing process have given Weller® . filter
Bigger
filter particles
and
and smallerget
smaller caughtget
particles
particles in the
get pre-in
caught
caught F7 for applications with high
® Zero-Smog® Systems are specifically
flux content
Weller
Weller
®
high quality manufacturing process have given
extraction systems a world wide
extraction systems a world wide reputation for 1. The
filter
the
in hazardous
and
HEPA
the HEPA(High substances
smaller particles
Efficiency
(High are efficiently
getParticulate
caughtAir)
Particulate
Efficiency in Filter Class Recommended Application
flux content
designed for continuous operation in industrial
Weller® extraction systems a world wide
reputation for reliability and longevity.
reliability and longevity. captured
filter.by
the HEPA
filter.
Air) the Efficiency
(High nozzle andParticulate
are absorbedAir) FH12
5 / H13 for standard applications
filter for clean rooms
environments. Care and attention at the design
reputation for reliability and longevity. . into
3. The the filter.
Wide
filter.
The Wide BandGas
Band GasFilter
Filterremoves
removes
H12 / H13 filter for clean rooms
Weller have a three stage fumes and adhesives. 1000 – 100
Weller®Zero-Smog
Zero-SmogSystems
® ®
stage plus careful component choice and a
®
Systems have a three .
. Bigger
The Wideparticles
Band
fumes and adhesives. get
Gas caught
Filter in the pre-
removes F7 for applications with high
filter system for removing small particles, fumes 1000 – 100
high quality manufacturing process have given
Weller filter
stage ®
Zero-Smog Systems have a three
system for removing small
® filter
fumesand
andsmaller particles get caught in
adhesives. flux content
and gases that are produced in different working End product – clean air – is re-circulated into the
Weller extraction systems a world wide
stage®filter system for removing small
particles, fumes and gases that are produced the HEPA (High Efficiency Particulate Air)
End product – clean air – is re-circulated into
processes: workplace.
reputation for reliability and longevity.
particles, fumes and gases that are produced
in different working processes: filter.
End product – clean air – is re-circulated into
the workplace. H12 / H13 filter for clean rooms
in different working processes: . The Wide Band Gas Filter removes
the workplace. 1000 – 100
Weller® Zero-Smog® Systems have a three fumes and adhesives.
stage filter
particle size:system for removing small medium filtration efficiency Em %
particles, fumes and gases that are produced
particle size: against
mediumparticle
End product – clean air – is re-circulated into size
filtration 0,12 µm:Em %
efficiency
in different working processes:
0,5 µm e.g. viruses the workplace. against particle size 0,12 µm:
100
0,5 µm e.g. viruses 90
100
5 µm e.g. bacteria, pigments
80
90
5 µm e.g. bacteria, pigments
10 µm size:
particle e.g. fibres, pollen 70
80
medium filtration efficiency Em %
10 µm e.g. fibres, pollen 60
against
70 particle size 0,12 µm:
0,5 µm e.g. viruses 50
60
100
40
50
90
5 µm e.g. bacteria, pigments
30
40
80
100 µm e.g. fog, hair 20
30
10 µm e.g. fibres, pollen 70
100 µm e.g. fog, hair 10
20
60
10
50
Filter Class: F5 F7 H12 H13 Filter Class: F5 F7 H12 H13
40
Filter Class: F5 F7 H12 H13 Filter Class: F5 F7 H12 H13
30
Filter Class F5, F7: Fine dust filter as per EN 779
100Class
µm F5,e.g.
Filter F7:fog,
Finehair
dust filter as per EN 779 20
Filter Class F5, F7: Fine dust filter as per EN 779
Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter
Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter 10
Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter
1. Fine dust filter
Filter Class: F5 F7 H12 H13 Filter Class: F5 F7 H12 H13
For standard applications with a small amount of flux
1. Fine dust filter
and pollution gases with high solid content, Weller
For standard applications with a small amount of flux ®

Filter Process
Filter Class F5, F7: Fine dust filter as per EN 779 offers filter classes F or F7.
and pollution gases with high solid content, Weller ®

Filter Process
Filter Class H12/H13: According EN 1822 HEPA (High Efficiency Particulate Air) Filter
WFE 0D, WFE S,
offers filter classes F or F7.
0D,
WFE S, WFE8S,
WFE S,
Filter Process .
1. Compact
1. Fine dust
Fine dust
filter consisting of:
filter
filter
WFE, WFE P WFE X S, WFE
WFE ES, WFE8S,
CS HEPA
. filter filter
ForCompact
standard consisting
applications withof:
a small amount of
WFE, WFE P WFE X WFE ES, WFE CS For standard applications with a small amount of flux
Filters particles up to 0,3 μm. Weller offers HEPA (High
HEPA
flux andfilter
pollution gases with high solid content, ®
and pollution gases with high solid content, Weller
Filter Process Efficiency Particulate Air) filters of class H1 and H1,
Filters particles up to 0,3 μm. Weller offers HEPA (High
Weller® offers filter classes
offers filter classes F or F7. F5 or F7.
WFE 0D, WFE S, medium filtration efficiency 99,5 % / 99,95 %.
Efficiency Particulate Air) filters of class H1 and H1,
.+. 1. S, WFE 8S,
WFE medium filtration efficiency 99,5 % / 99,95 %.
2.Compact
. Compact filter
filter consisting
consisting of: of:
.+.WFE P
WFE, WFE X 1. ES, WFE CS
WFE Wide
HEPAband filtergas filter
HEPA filter
For cleaning harmful fumes and vapours. The Weller
Wide
Filtersband gas up
particles filter
to 0.3 µm. Weller offers HEPA
Filters particles up to 0,3 μm. Weller offers HEPA (High
wide band gas filter consists of 0 % active
For cleaning harmful fumes and vapours. The Weller
(High Efficiency Particulate Air) filters carbon
of class H12
Efficiency Particulate Air) filters of class H1 and H1,
and 0 % Puratex. Harmful gases with a high mole-
wide band gas filter consists of 0
H13, % active carbon
medium filtration efficiency 99,5 % / 99,95 %. /
and medium filtration efficiency 99.5%
cular weight are cleaned by the active carbon. Puratex
99.95%.% Puratex. Harmful gases with a high mole-
and 0
.+. 1. is suitable for absorbing gases of lower molecular
cular weight are cleaned by the active carbon. Puratex
. or . . or . Wide band gas filter
weight. Because of its composition, Puratex is able
is suitable for absorbing gases of lower molecular
Wide band gas filter
. or . . or . For cleaning harmful fumes and vapours. The Weller
to convert a large number of chemical pollutants by
weight. Because of its composition, Puratex is able
For cleaning harmful fumes and vapours.
wide band gas filter consists of 0 % activeThe
carbon
means of molecular modification into non-polluting
to convert a large number of chemical pollutants by
Weller wide band gas filter consists of 50% active
and 0 % Puratex. Harmful gases with a high mole-
gases.
means of molecular modification into non-polluting
carbon and 50% Puratex. Harmful gases with
cular weight are cleaned by the active carbon. Puratex
1. gases.
a high molecular weight are cleaned by the active
is suitable for absorbing gases of lower molecular
1. . or . . or . . Gas filter
carbon. (option)
Puratex is suitable for absorbing gases of
weight. Because of its composition, Puratex is able
The gas filter is used for extracting adhesive fumes
. Gasmolecular
lower filter (option)
weight. Because of its composition,
to convert a large number of chemical pollutants by
and solvents. Experience has shown that filtering
The gas filter is used for extracting adhesive fumes
Puratex is able to convert a large number of
means of molecular modification into non-polluting
suspended particles is not so vital in this respect.
and solvents. Experience has shown that filtering
chemical pollutants by means of molecular
gases.
The gas filter is filled with 0 % gases.
active carbon and
suspended particles is not so vital in this respect.
modification into non-polluting
1.
0 % Puratex. The HEPA H12 and H13 is omitted.
The gas filter is filled with 0 % active carbon and
. Gas filter (option)
0 % Puratex. The HEPA H12 and H13 is omitted.
3. Gas filter (option) 
filter drawings not true to original The gas filter is used for extracting adhesive fumes
The gas filter is used for extracting adhesive
and solvents. Experience has shown that filtering fumes 
filter drawings not true to original
and solvents. Experience has shown that filtering
suspended particles is not so vital in this respect.
suspended particles is not so%vital
The gas filter is filled with 0 in this
active respect.
carbon and
The%gas
0 filter is filled with 50% active carbon
Puratex. The HEPA H12 and H13 is omitted.
and 50% Puratex. The HEPA H12 and H13 is 
filter drawings not true to original omitted.

38 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 (50 % active carbon, 50 % Puratex)
es the WFE a genuine Air consumption 30 l/min
Fine dust filter F7
lter-lift system allows Height 200 mm (7.8 in)
cartridge replace-
Diameter 140 mm (5.5 in) Order No. 0V 005 36 402 99

Tip Extraction
ction) soldering irons
HEPA filter H13
he unit – additional Weight 2,7 kg / 5.9 lb Order No. 10V WFE
TIP FUME EXTRACTION
and
wide band gas filter

WFE P Attributes
Solder
Small, Fume electrically
portable, Extractingdriven
Unit
fume extraction unit The Weller® WFE P is a line voltage fume Up to  FE soldering irons can be
Description Material No. Shelf
extraction unit designed to run with one or two connected
Pack
Fine dust pre-filter F7 FE (Fume Extraction) soldering irons. The WFE P Electric vacuum pump to produce the
de band gas filter
atex) WFE WFEP2
has an electric, long-life, soundproofed vacuum
The Weller WFE P2 is a line voltage fume
® required Attributes
T0053624599
vacuum 1

Small, portable, compressed air pump to produce the required vacuum – it does
driven extraction unit designed to run with one or  power stages for higher extraction
two FE (Fume Extraction) soldering irons. The
The fume extraction unit WFE requires clean Up to  FE soldering irons can be
05 36 402 99 fume extraction unit WFE P2 has an electric, long-life, soundproofed perfomance with  FE soldering irons
not need a compressed air supply. The vacuum
WFE pump to produce the required vacuum Portable unitconnected
and oil-free compressed air. The vacuum is ge-
pump has two power settings which can be se-
vacuum for stand alone applications
-nerated by a maintenance-free compressed air
it does not need a compressed air supply. Maintenance-free compressed air
lected by means of rocker switches depending
The vacuum pump has two power settings
Attributes
converter. The contaminated air is purified by a
which can be selected by means of rocker
on the number of FE soldering irons connected converter
switches depending on the number of FE
pre-filter and main filter system. A compressed
to the unit. This saves energy. The motor is
soldering irons connected to the unit. This Portable unit for stand alone applicatio
e voltage fume Up to  FE soldering irons can be air cleaning filter removes additional odours
saves energy. The motor is maintenance-free
maintenance-free and has a thermal over load
o run with one or two connected and has a thermal over load to protect the unit.
caused by the compressed air. This highly
to protect the unit. The filter lift system allows
The filter lift system allows fast and convenient
ering irons. The WFE P Electric vacuum pump to produce the main filter replacement. FE soldering irons are HEPA filter H13
oundproofed vacuum required vacuum
efficient filter system makes the WFE a genuine
fast and convenient main filter replacement.
connected directly to unit - additional leads and
uired vacuum – it does  power stages for higher extraction air recovery system. The filter-lift system allows
FE soldering irons are connected directly to unit
are not required.
r supply. The vacuum perfomance with  FE soldering irons • Up to 2 FE soldering irons can be
fast and convenient filter cartridge replace- wide band gas filter
– additional leads are not required.
connected
ings which can be se- Portable unit for standESD
alone
safe applications
low sound level
•ment. The FE (Fume Extraction) soldering irons
Electric vacuum pump to produce the
switches depending required vacuum HEPA filter H13
ering irons connected •are connected directly to the unit – additional
2 power stages for higher extraction and
rgy. The motor is Technical Data leads are not required.
performance with 2 FE soldering irons
s a thermal over load
• Portable unit for stand alone wide band gas filter
Maximum capacity 2 FE soldering irons Scope of supplyapplications.
er lift system allows ESD safe low sound level Scope of supply includes:
Sound level HEPA filter H13
< 45 db (A) at 1 m distance • WFE P Fume extraction unit
filter replacement. WFE P Fume extraction unit
and • Compact filter
nected directly to unit Operating voltage 230 V / 50 Hz
Technical
wide band gas filter
Data
Compact filter Scope
Consists ofof: HEPA filter H13, wide band
supply Fine dust pre-filter F7
required. Power input 70 W gas filter (50% active carbon,
Consists of: HEPA filter H13, wide band gas filter
Characteristics
Maximum vacuum Maximum capacity
30.000 Pa 2 FE soldering irons 50% Puratex)
(50 % active carbon, 50 % Puratex)
• Fine
WFE Fume extraction unit
dust filter F7
Height Fine dust filter F7
Sound level 295 mm (11.6 in) < 39 db (A) at 1 m distance Technical Data:
Compressed air cleaning filter
Two operating modes: Maximum capacity 2 FE soldering irons
Diameter Maximum vacuum
140 mm (5.5 in) 20.000 Pa Order No. 0V Compact filter
Mode 0: Vacuum regulated to 1.000 Pa Sound level <45005 36 386 99
db (A) at 1m distance Fine dust pre-filter F
Operating pressure
Mode 1: Extraction
Weight 4 kg / 8.8 lb can 3,5 - 6 bar
performance Consists of: HEPA filter H13, wide band gas filter
Operating voltage 230V/50Hz
Order No. 10V WFE2P
be set between 0 %Fine dust pre-filter F7
– 100 % with the Power (50 % active carbon, 50 % Puratex)
input 70W
Air consumption 30 l/min
Maximum vacuum 30.000 Pa
de band gas filter 0 control buttons. Fine dust filter F7
Height 200 mm (7.8 in) Height 295mm (11.6in)
atex) Electronic filter check (LED) through Diameter 140mm (5.5in)
differentialDiameter
pressure measurement. 140 mm (5.5 in) Order4kg/8.8lb
Weight No. 0V 005 36 402 99
005 36 386 99 Weight
If the specified degree of contamination 2,7 kg / 5.9 lb Order No. 10V WFE
WFE2P is exceeded, the unit switches off.
Electronic filter operation status display.
WellerFor ® WFE20D
better management of filter change
ically
it
WFE P
intervals – the filter operating hours Characteristics
Attributes
Small, portable,
can be pre-specified. The needelectrically
for filter driven WFE20D T0053647699 1
change isfume
indicated in good time
extraction allowing
unit Two operating modes: The Weller
Solder ®
WFE P is a line voltage fume
fume extraction unit with built-in Up to  FE soldering irons can be
adequate time for filter procurement and turbine for up to 20FE soldering irons
extraction unit designed to run with one or two connected
replacement. Interface RS  for remote
Mode 0: Vacuum regulated
Consists of:
to 1.000 Pa
Mode 1: Extraction FE (Fume Extraction) soldering irons. The WFE P
performance can Electric vacuum pump to produce the
monitoring or remote control. • Extraction Unit
Remote control available as accessory. be set between has an electric, long-life, soundproofed vacuum
0 % – 100
• Fine Dust filter F7 % with the required vacuum
control buttons. •pump to produce the required vacuum – it does
Compact filter  power stages for higher extraction
Electronic filter•not need a compressed air supply. The vacuum
check
Wide (LED)
Band Gas through
filter perfomance with  FE soldering irons
differential pressure (50% Active measurement.
Carbon, 50% Puratex)
pump has two power settings which can be se- Portable unit for stand alone applicatio
rs and filter conta- Attributes If the specified•lected by means of rocker switches depending
ROHS & WEEE
degree compliant
of contamination
corded electronically. is exceeded, the unit switches off.
a filtration rate of Up to 0 FE soldering irons can be WFEon the number of FE soldering irons connected
20D Mobile Fume Extraction Unit
Electronic filter The operation
WFE 20D hasstatus display.for fume extraction direct from the soldering tip. Up to 5 Weller FE soldering
been designed
with a particle size of connected to the unit. This saves energy. The motor is
irons
For better management can be connected
of filter directly.
changeThe capacity is 20 FE soldering irons with the optional DN 40 tubing system.
Electric driven, maintenance free turbine The powerful maintenance free electronically controlled turbine provides a maximum vacuum of 12.000 Pa.
intervals – the maintenance-free and has a thermal over load
filter operatingalso hours
produces the required vacuum The microprocessor ensures detection of operating hours and the status of filter absorbency. The three-
 wheels to allow easy movement can be to protect the unit. The filter lift system allows
pre-specified.
stage filterThe
systemneed for filter
is suitable for use with soldering fumes. The filter system consists of a fine particulate
airfast and convenient main filter replacement.
filter F5 and a combined submicron particulate air filter H13 plus wide band gas filter (50 % AKF, HEPA filter H13
50 %
of the unit change is indicated in good time allowing
Mobile unit for central and stand alone
Puratex). and
adequate time FE soldering irons are connected directly to unit
for filter
It removes procurement
99,95 and up to 0,12 µm according to EN 1822.
% of contaminants
applications replacement.Characteristics:
Interface RS  for remote
wide band gas filter
– additional leads are not required.
• Two operating modes:
Central installation for pipe systems upESD safe low sound level
monitoring or Mode
remote control.
0: Vacuum regulated to 12.000 Pa
to 00 m (787 in) Mode 1: Extraction performance can be set between 20% - 100% with the control buttons.
Remote control available as accessory.
• Electronic filter check (LED) through differential pressure measurement. If the specified degree
low sound level Technical Data of contamination is exceeded, the unit switches off.
• Electronic filter operation status display. For better management of filter change intervals -
Maximum capacity 2 FE soldering irons Scope
the filter of supplyhours can be pre-specified. The need for filter change is indicated in good
operating
Sound level < 45 db (A) at 1 m distance time allowing adequate time for filter procurement and replacement. Interface RS 232 for remote
ction) soldering controlled. Operating hours and filter conta- Attributes monitoring or remote control.
WFE P Fume extraction unit
to the fume Fine dust pre-filter F5
Operating voltage 230 V / 50 Hz
mination level are also recorded electronically. • Remote control available as accessory.
Compact filter
Attributes: Fine dust pre-filter F
the Pipe System The filter system achieves a filtration rate of
Power input 70 W Up to 0 FE soldering irons can be
• UpConsists of: HEPA filter H13, wide band gas filter
to 40 FE soldering irons can be connected
o 40 FE solde- 99,95 % as per EN 1822 with a particle size of
Maximum vacuum 30.000 Pa connected • Electric driven, maintenance free turbine produces the required vacuum
(50 % active carbon, 50 % Puratex)
• 4 wheels to allow easy movement of the unit
Fine dust filter F7
the unit. The 0,12 μm. Height 295 mm (11.6 in)Electric driven, maintenance
• Mobile freeand
unit for central turbine
stand alone applications
bine generates Diameter 140 mm (5.5 in) produces the •required
Central vacuum
Order No. 0Vfor pipe systems
installation up to 200 m (7874 in)
005 36 386 99
lectronically HEPA filter H13 4 kg / 8.8 lb  wheels to allow Technical easy Data: movement
Weight Maximum Ordercapacity
No. 10V 40 FE solderingWFE2P
irons
and of the unit Sound level <51 db (A) at 1m distance
de band gas filter 0 wide band gas filter Mobile unit Operating
for central voltage
and 230V/50Hz
stand 120V/60Hz
alone
Power input 630VA
atex) applications Maximum vacuum 12.000 Pa
Central installationMax. delivery for pipe systems
rate 100 m3/h up
to 00 m (787 Dimensions
in) (L x W x H) 450 x 450 x 695 mm, 17.7 x 17.7 x 27.3 in
05 36 476 99 Weight 45kg/99lb
WFE20D

1

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 39
 Tip Extraction
TIP FUME EXTRACTION

Solder Fume Extraction Pencil Adaptors

FE (Fume Extraction) Soldering Irons
Description Material No. Shelf
Pack

Tip Extraction The smoke absorption tube is integrated into

TCP, TC201, EC1201A fume extraction pencil
adaptor
the handle. It can be placed over the joint
when soldering but can be retracted when
can be driven from any Weller
AKFE11 1 power unit
®

compatible with the rating of the iron or any

Weller® rework station. The range of iron power
access to the joint is a problem and can also be ratings and the extensive range of solder tips
removed for cleaning. The irons are tempera- mean that there is an iron to suit all applica-
ture controlled, ergonomic and allow precise tions. The FE soldering irons are supplied with a
handling. These electronically controlled irons burn proof hose 5 mm (0.19 in) diameter, 2,5 m
FE (Fume Extraction) Soldering Irons (98.42 in) long.
FE (Fume Extraction) Soldering Irons Description Material No. Shelf
Pack
ESD safe The smoke absorption tube is integrated
The smoke absorption tube is integrated into can be driven from any Weller® power unit
into the handle. It can be placed over the
the handle. It can be placed over the joint compatible with the rating of the iron or any
Order No. joint when soldering but can be retracted
Description
when soldering but can be retracted when
when access to the joint is a problem and Weller® rework station. The range of iron power
005 33 150 99
can also FE
be 50 Soldering
removed iron setThe
for cleaning.
access to the joint is a problem and can also be 50 irons
W / 24 V,ratings and the extensive range of solder tips
with safety rest KH 20*.
are temperature
Not controlled,
available in US.ergonomic and
removed for cleaning. The irons are tempera-
allow precise handling. These electronically
mean that there is an iron to suit all applica-
controlled irons can be driven from any Weller®tions. The FE soldering irons are supplied with a
ture controlled, ergonomic and allow precise
power unit compatible with the rating of the burn proof hose 5 mm (0.19 in) diameter, 2,5 m
handling. These electronically controlled irons
iron or any
005 32 152 99 FEWeller rework station.
50M®Soldering The50
iron set range
W / 24(98.42 in) long.
V, Magnastat controlled with safety rest KH 20*.
of iron power ratings and the extensive range
Not available in US.
of solder tips mean that there is an iron to suit
all applications. The FE soldering irons are
supplied with a burn proof hose 5mm (0.19 in)
ESD safe
diameter, 2.5m (98.42 in) long.
005 33 151 99 FE 75 Soldering iron set 80 W / 24 V with safety rest KH 20*.
For use with LT tips.
Order No. FE ATTACHMENTS Description
A range of FE attachments are available to fit
005 33 150 99 standardFE 50 Soldering
Weller ®
solderingiron
andset 50 W / 24 V, with safety rest KH 20*.
desoldering
irons to Not available
convert them toinfume
US. extraction
005 26 162 99 versions.FE
The80attachments
Soldering iron 80 W / 24
are supplied V with
with all safety rest KH 20*.
necessaryNotfittings and hoses.
available in US. The performance
of the retro-fitted tools if not affected. For
005 32 152 99 Weller® FE 50M Soldering
soldering irons WP120,ironWP80,
set 50 W / 24 V, Magnastat controlled with safety rest KH 20*.
WSP80,
WMP, MLR21 or soldering
Not available irons with handle
in US.
diameter 10-13mm (0.39-0.51 in). Clip will be
* Cleaning brush for FE tubes and fume extraction funnels are included in the scope of supply of the soldering irons
fixed with an silicone O-ring to the soldering
for use with KH 20 and KH 23 safety rests.
iron.
005 33 151 99 FE 75 Soldering iron set 80 W / 24 V with safety rest KH 20*.
FE Attachment with tube, 6.0mm for WP120,
FE Attachments WSP80, For useMLR21,
WP80, with LTMLR80,
tips. WMP

FE Attachment with tube, 4.5mm for WP120,

A range of FE attachments are available to fit For Weller® soldering irons WP 120, WP 80,
WMRP® and WSP80, WP80, MLR21, MLR80, T0052918699 1
standard Weller
005 26 162 99 soldering and desoldering
WMP forFE 80soldering
fine Soldering iron 80 W / 24 V withWSP 80, WMP, MLR 21 or soldering irons with
applications safety rest KH 20*.
irons to convert them to fume extraction
Not available in US. handle diameter 10 –13 mm (0.39 – 0.51 in).
versions. The attachments are supplied with all
FE Spare Clip-Set for FE attachment, tube Clip will be fixed with an silicone O-ring to the
4.5mm (0.17 in) T0052918599 1
necessary fittings and hoses. The performance soldering iron.
of the retro-fitted tools is not affected.
FE Spare Clip-Set for FE attachment, tube
* Cleaning brush for FE tubes and fume extraction funnels are included in the scope of supply of the soldering irons
6.0mm (0.23 in)
for use with KH 20 and KH 23 safety rests.
Order No. Description T0058744875 1
005 29 186 99 FE Attachment with tube, ø 6 mm (0.23 in) for WP 120, WSP 80, WP 80, MLR 21,
FE Attachments MLR 80, WMP.
T0058744876 1
005 29 185 99 FE Attachment with tube, ø 4,5 mm
A range of FE attachments are available to fit (0.17 in)
For Weller ® for WP 120, WMRP and WSP 80,
soldering irons WP 120, WP 80,
WP 80, MLR 21, MLR 80, WMP for fine
standard Weller® soldering and desoldering soldering applications.
WSP 80, WMP, MLR 21 or soldering irons with
005 87 448 75 FE Spare Clip-Set
irons to convert them to fume extraction for FE attachment, tube ø 4,5 mm (0.17 in).
handle diameter 10 –13 mm (0.39 – 0.51 in).
versions. The attachments are supplied with all
005 87 448 76 FE Spare Clip-Set for FE Clip will be fixed with an silicone O-ring to the
attachment, tube ø 6,0 mm (0.23 in).
necessary fittings and hoses. The performance
005 15 156 99 soldering iron.
WDH 50 safety rest for soldering iron with FE attachment.
of the retro-fitted tools is not affected.
005 25 125 99 FE Attachment for LR 21, LR 82, TCPS, W 61, W 101, WSP 150 with safety rest AK 1.
005 28 126 99 FE Attachment for WSF 80D5/8.
005 13No.
Order 125 99 FE Attachment for DS 22, DS 80 and DSX 80 desoldering iron.
Description
005 29 186 99 FE Attachment with tube, ø 6 mm (0.23 in) for WP 120, WSP 80, WP 80, MLR 21,

MLR 80, WMP.
005 29 185 99 FE Attachment with tube, ø 4,5 mm (0.17 in) for WP 120, WMRP and WSP 80,
WP 80, MLR 21, MLR 80, WMP for fine soldering applications.
005 87 448 75 FE Spare Clip-Set for FE attachment, tube ø 4,5 mm (0.17 in).
005 87 448 76 FE Spare Clip-Set for FE attachment, tube ø 6,0 mm (0.23 in).
005 15 156 99 WDH 50 safety rest for soldering iron with FE attachment.
005 25 125 99 FE Attachment for LR 21, LR 82, TCPS, W 61, W 101, WSP 150 with safety rest AK 1.
005 28 126 99 FE Attachment for WSF 80D5/8.
005 13 125 99 FE Attachment for DS 22, DS 80 and DSX 80 desoldering iron.

 40 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 Weight 2,7 kg / 5.9 lb Order No. 10V WFE

Extraction
WFE P Attributes
VOLUME
Small, portable,FUME EXTRACTION
electrically driven
Volume Extraction fume extraction unit The Weller® WFE P is a line voltage fume
extraction unit designed to run with one or two
Up to  FE soldering irons can be
connected
FE (Fume Extraction) soldering irons. The WFE P Electric vacuum pump to produce th
Weller® WFE2X has an electric, long-life, soundproofed vacuum required vacuum
t pump to produce the required vacuum – it does
Description Material No. power Shelf
stages for higher extractio
places Attributes
WFE 2X not need a compressed air supply. The vacuum perfomancePack with  FE soldering iron
Mobile fume extraction unit
Mobile fumeAttributes WFE2X
extractionpump has two power settings which can be se-
unit purifies air WFE2XAU Portable unit 1 for stand alone applic
purifies air up to two workplaces
at up to  workplaces Mobile lected by means of rocker switches depending
fume extraction unit purifies air up to
two workplaces.
Electronic filter Mobile on the number of FE soldering irons connected
fume extraction
control and easyunit purifies air
at The
up toWFE2X is a fume
 workplaces extraction unit and is
Attributes filter exchange Electronic
to the unit. This saves energy. The motor is
suitablefilterfor applications
control and with
easy a high demand
Wireless remote forcontrol
filter gas and with
exchange particle alarm
maintenance-free and has a thermal over load
filtration, e.g. soldering,
Mobile fume extraction unit purifies air function adhesives,
Wireless remote clean roomwith
control work and laser.
alarm
to protect the unit. The filter lift system allows
Extra noise damped It can be
function placed
metal on a trolley and be moved
housing HEPA filter H13
at up to  workplaces Extra
easily fast and convenient main filter replacement.
noise damped
between metal housing
different work places.
Quick and simple installation and
Electronic filter control and easy Quick FE soldering irons are connected directly to unit
and
Variable simple
speed installation
and the alarm function for
Trolley available Trolleyasavailable
filter accessory
exchange ascan
accessory
be set via the remote wide band gas fi
filter exchange Minimized – additional leads are not required.
foot print
ESD safe Minimized
low sound foot print For
level control. applications which produce a
Wireless remote control with alarm Switching power
Switching power supply fits for all global
supply
large quantity fitsof for all global
particles, e.g. lead-free
voltages
function voltages soldering,
Optimized an external
lifetime filter pre-filter can be fitted
Extra noise dampedTechnical metal housing
Data Optimized lifetime to increase
filter the lifetime of the main filter. To
makeScope installation easier, the WFE2X can be
Quick and simple installation Maximum capacity 2 FE soldering irons of supply
suspended under the work table with special
Trolley available asSound level accessory < 45 db (A) at 1 m distance fittings. An RS 232 interface makes it possible
WFE P Fume extraction unit
Minimized foot print Operating voltage 230 V / 50 Hz to integrate the software with other process
Compact filter
equipment. Fine dust pre-filte
Switching power supply fits for all global70 W
Power input
Technical Consists of: HEPA filter H13, wide band gas filter
Data:
voltages ESD safe
Maximum vacuum
low sound level
30.000 Pa Maximum (50 % active carbon, 50 % Puratex)
capacity 2 work plces
Optimized lifetime Height filter 295 mm (11.6 in) Maximum Fine dust filter F7
extraction rate 140 m3/h
Sound level <52 db (A) at 1m distance
Diameter
The WFE 2X is a fume extraction unit and is 140 mm (5.5 in) Order No. 100-240V/50/60Hz
0V 005 36 386 99
suitable for applications with a high demand
low sound level
Operating
WFE 2X Kit
voltage
Weight 4 kg / 8.8 lb Order100W
Power input No. 10V WFE2P
for gas and particle filtration, e.g. soldering,
adhesives, clean room work and laser. Maximum vacuum 2.300 Pa
0 Optimized lifetime Dimensions (L x W x H)
unit and is filter
It can be placed on a trolley and be moved 210 x 460 x 660 mm
high demand
easily between different work places. Vari- WFE 2X Kit 8.3 x 18.1 x 26 in
g. soldering, HEPA filter H13 and
able speed and the alarm function for filter Weight 15kg/33lb
wide band gas filter
laser. exchange can be set via the remote control.
For applications which produce a large quantity Optimized lifetime
of particles, e.g. lead-free soldering, an external filter
be moved
pre-filter can be fitted to increase the lifetime
aces. Vari-
of the main filter. To make cleaning easier, the Mobile fume extraction kit
WFE 2X can be suspended under the work table HEPA filter H13 and
on for filter
with special fittings. An RS 232 interface makes wide band gas filter
ote control.
it possible to integrate the software with other
a large quantity WFE 2X Kit
process equipment.
Scope of supply
WFE2X KIT 1 WFE2XKIT1AU 1
ing, an external 005 36 588 99 WFE 2X Fume extraction
Mobile fume extraction kit
unit 100-240 V / 50/60 Hz
e the lifetime Scope of supply Includes:
005 36 579 99 KIT 1 WF 60 Sloped stativ
time Technical Data
ng easier, the extraction arm for volume extraction
Mobile fume extraction kit
Maximum capacity 2 work places •consists of:
2X Fume extraction unit
WFE 2X Fume extraction unit 100-240 V / 50/60 Hz
r the work table
Maximum extraction rate 140 m3/h Compact filter
100-240V / 50/60Hz
005 36 598 99 Stativ extraction arm
•005 36 573 99 Funnel nozzle
KIT 1 WF60 Sloped stativ extraction
nterface makes
Sound level < 52 db (A) at 1 m distance Consists of: HEPA filter H13, wide band gas filter
005 36 574 99 Stop valve
Operating voltage 100 – 240 V / 50/60 Hz (50 % active carbon / 50 % Puratex) arm for volume extraction consists of:
3 and Power input
ware with other 005 365 75 99 Bench mounting bracket
Scope of supply 005 36 576 99 Extraction hose
100 W Stativ extraction arm
s filter Maximum vacuum 2.300 Pa
Accessories for WFE 2X see on page 16.
Funnel nozzle
Dimensions (L x W x H) 210 x 460 x 660 mm 005 36 588 99 WFE 2X Fume extraction
Stop valve
8.3 x 18.1 x 26 in Order No. 0V plug 005 36 588 99 unit 100-240 V / 50/60 Hz
Order No. 230V
Bench mounting005 36 589 99
bracket
Weight 15 kg / 33 lb Order No. 10V plug WFE2X 005 36 579 99 KIT 1 WF 60 Sloped stativ
Scope of supply Extraction hose
extraction arm for volume extraction
laces10 consists of:
WFE 2X Fume extraction unit 100-240 V / 50/60 Hz
h Mobile fume extraction kit
Compact filter
005 36 598 99 Stativ extraction arm
005 36 573 99 Funnel nozzle
(A) at 1 m distance Consists of: HEPA filter H13, wide band gas filter
005 36 574 99 Stop valve
0 V / 50/60 Hz (50 % active carbon / 50 % Puratex)
005 365 75 99 Bench mounting bracket
005 36 576 99 Extraction hose
Accessories for WFE 2X see on page 16.
Scope of supply
0 x 660 mm
005 36 588 99 WFE 2X Fume extraction
1 x 26 in Order No. 0V plug 005 36 588 99 Order No. 230V 005 36 589 99
unit 100-240 V / 50/60 Hz
3 lb Order No. 10V plug WFE2X
005 36 579 99 KIT 1 WF 60 Sloped stativ
extraction arm for volume extraction
consists of:
Hz
005 36 598 99 Stativ extraction arm
005 36 573 99 Funnel nozzle

005 36 574 99 Stop valve
005 365 75 99 Bench mounting bracket
005 36 576 99 Extraction hose

9 Order No. 230V 005 36 589 99

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 41
 Air consumption 30 l/min
Fine dust filter F7
Height 200 mm (7.8 in)
Diameter 140 mm (5.5 in) Order No. 0V 005 36 402 99
Weight 2,7 kg / 5.9 lb Order No. 10V WFE

VOLUME FUME EXTRACTION

WFE 2S WFE 2 Kit 1
Mobile fume extraction WFEunitP Attributes
available in ®two kitsSmall, portable, electrically driven Attributes
Weller WFE2S The Weller® WFE P is a line voltage fume Up to  FE soldering irons can be
fume extraction unit
Two kits available extraction unit designed to run with one or two
Description Material No.connected Shelf
FE (Fume Extraction) soldering irons. The WFE P
Mobile fume extraction unit purifies air Electric vacuum
Pack pump to produce the
at up to  workplaces
WFE2S has an electric, long-life, soundproofed vacuum T0053626699 required vacuum
1
Electronic filter
WFEcontrol
pump to produce the required vacuum – it does
The fume extraction unit WFE2S is easy to
and easy filter  power stages for higher extraction
WFE 2S 2 Kit 1
install and operate. It is designed as a smaller,
Mobile fume extraction unit exchange not need a compressed air supply. The vacuum
central system and is supplied complete
perfomance with  FE soldering irons
Attributes
available in two kits
with pump has two power settings which can be se-
flexible
 wheels to allow easy movement hose, arm and bracket, ready Portable unit for stand alone applications
Two kits available for installation at the workplace. A powerful,
lected by means of rocker switches depending
of the unit
Mobile fume extraction unit purifies air maintenance-free pump provides continuous
at up to  workplaces Remote controlfume with on the number of FE soldering irons connected
alarmatfunction
extraction a maximum air extraction Portable fume extraction kit for one work station
Electronic filter control and easy filter
Noise damped rate
metal to the unit. This saves energy. The motor is
of 230m 3
housing /h. A built-in microprocessor
exchange controls the adjustable pump speed avoiding
Quick and simple
 wheels to allow easy movement maintenance-free and has a thermal over load
installation
unnecessary waste of suction power and Scope of supply
of the unit
saving to protect the unit. The filter lift system allows
energy. To optimize the degree of
Remote control with alarm function Portable fume extraction kit for one work station HEPA filter H13
Noise damped metal housing fast and convenient main filter replacement.
pollutant separation, the WFE2S can be 005 36 266 99 WFE 2S Fume extraction
Quick and simple installation modified with filters for different applications. and
Scope of FE soldering irons are connected directly to unit
supply unit 120/230 V / 50/60 Hz
Technical Data:
wide band gas filter
005 36 572 99 KIT 1 WF Sloped 60 for volume extraction
Maximum– additional leads are not required.
capacity 2 work places
005 36 266 99 WFE 2S Fume extraction
ESD safe low sound level unit 120/230 V / 50/60 Hz consists of:
Maximum extraction rate 230 m3/h
005 36 572 99 KIT 1 WF Sloped 60 for volume extraction
Sound level 48 db (A) at 1m distance
consists of: 005 36 578 99 Extraction arm
Standard connection pipe system 50
005 36 578 99 Extraction arm 005 36 577 99 Slopped nozzle
005 36 577 99 Slopped nozzle
Technical Data Operating voltage 120/230V / 50/60Hz
005 36 574 99 Stop valve 005 36 574 99 Stop valve
Power input of 275VA 005 365 75 99 Bench mounting bracket
Maximum capacity 2 FE soldering irons Scope supply
005 365 75 99 Bench mounting bracket
005 36 576 99 Extraction hose
Maximum vacuum 2.700 Pa 005 36 576 99 Extraction hose
Sound level < 45 db (A) at 1 m distance Dimensions (L x W x H)
WFE P Fume extraction unit
Order No. 230V 005 36 572 99
Operating voltage 230 V / 50 Hz 320 x 320 x 395 mm
Order No. 120V WFE2Kit1
ESD safe low sound level
Fine dust pre-filter 12.6 x Compact filter
12.6 x 15.5 in Order No. 230V 005 36 572 99 Fine dust pre-filter F7
Power input 70 W
F7 WeightConsists of: HEPA filter H13, wide band gas filter
19kg / 41.8lb Order No. 120V WFE2Kit1
ESD safe low sound level
The fume extraction unit WFE 2S is easy to
Maximum vacuum 30.000 Pa (50 % active carbon, 50 % Puratex)
install and operate. It is designed as a smaller, WFE 2 Kit 2 Fine dust pre-filter
Height 295 mm (11.6 in) Fine dust filter F7
central system and is supplied complete with Fine mainF7 air filter (10 pack) T0058735885 1
flexible hose, arm and bracket, ready for instal-
Diameter 140 mm (5.5 in)
The fume extraction unit WFE 2S is easy to
lation at the workplace. A powerful, mainte-
Order No. 0V 005 36 386 99
nance-free pump provides continuous fume Weight
install and operate. It is designed as a smaller, 4 kg / 8.8 lb
HEPA filter H13 Main filter cartridge
Order No. 10V consists of: WFE2P WFE 2 KitT0058735883
2 1
extraction at a maximum air extraction rate of and • Submicron pariculate air filter (H13)
central system and is supplied complete with
230 m 3
0
/h. A built-in microprocessor controls the wide band gas filter • Wide band gas filter (50% active
WFE 2S
flexible hose, arm and bracket, ready for instal-
adjustable pump speed avoiding unnecessary
waste of suction power and saving energy. To
carbon, 50% Puratex) WFE 2 Kit 1
lation at the workplace. A powerful, mainte-
Mobile fume extraction unit
optimize the degree of pollutant separation,
the WFE 2S can be modified with filters for
nance-free pump provides continuous fume
available in two kits Attributes HEPA filter H13
different applications. Portable fume extraction kit for two work stations
extraction at a maximum air extraction rate of and
230 m3/h. A built-in microprocessor controls the Two Scope
kitsofavailable wide band gas filter
supply
Scope of supply WFE 2S
Mobile fume extraction unit purifies air
adjustable pump speed avoiding unnecessary 005 36 266 99 WFE 2S Fume extraction
WFE 2S Fume extraction unit 120/230 V / 50/60 Hz
at up unit 120/230 V / 50/60 Hz
to  workplaces
waste of suction power and saving energy. To Compact filter 2 x 005 36 572 99 KIT 1 WF Sloped 60 for
Technical Data Consists of: HEPA filter H13, wide band gas filter Electronic filter control and easy filter
volume extraction
optimize the degree of pollutant separation,
WFE 2S
Maximum capacity
Maximum extraction rate
2 work places
230 m /h
the WFE 2S can be modified with filters for
3
(50 % active carbon / 50 % Puratex)
Fine dust pre-filter F7
consists of:
exchange
2 x 005 36 578 99 Extraction arm
WFE 2 Kit 1
Weller
Mobile fume extraction unit
Sound level WFE2 Kits
® 48 db (A) in 1 m distance Order No. 0V 005 36 266 99  wheels to allow easy
2 x 005 36 577 99 Slopped nozzle
2 x 005 36 574 99 Stop valve
movement
different applications.
Standard connection pipe system 50 Order No. 10V
Attributes of the
WFE2S
unit
Portable fume extraction kit for two work stations
available
Operating voltage in two kits
120/230 V / 50/60 Hz
2 x 005 365 75 99 Bench mounting bracket
WFE2 KIT 1
2 x 005 36 576 99 Extraction hose T0053643699 1
Power input 275 VA Option: WFE S with gas filter
Compact filter for adhesive fumes. Consists of:
Remote One control
Workplacewith005 36 456 99
alarm function Portable fume extraction kit for one work station
Maximum vacuum
Dimensions (L x W x H)
2.700 Pa
320 x 320 x 395 mm
Two kits available
wide band gas filter (50 % active carbon / 50 % Puratex)
Order No. 230V
Noise•Order No. 120V
damped
1 Fume extractionmetalWFE2Kit2housing
unit WFE2S Scope of supply
Scope
Mobile of supply
fume WFE • 2S
extraction
1 Extraction unit
arm purifies
with nozzleair WFAN 50,
12.6 x 12.6 x 15.5 in Order No. 0V 005 36 466 99 Quick and simple installation Scope of supply
Weight 19 kg / 41.8 lb flexible, 50 mm diameter 005 36 266 99 WFE 2S Fume extraction
Order No. 10V WFE2SG
at up to  workplaces • 1 Table-mounting set WFTB 50
WFE 2S Fume extraction unit 120/230 V / 50/60 Hz unit 120/230 V / 50/60 Hz
Electronic
Compact filter filter• control and50easy filter 11
1 Seal WFFMP 005 36 266 99 WFE 2S Fume extraction
2 x 005 36 572 99 KIT 1 WF Sloped 60 for
unit 120/230 V / 50/60 Hz
Technical Data exchange • 1 Flexible hose NW 50 (3 m)
Consists of: HEPA filter H13, wide band gas filter volume extraction
005 36 572 99 KIT 1 WF Sloped 60 for volume extraction
Maximum capacity 2 work places (50 % active carbon / 50 % Puratex)
 wheels to allow easy movement consists of:
consists of:
Fine dust pre-filter F7 2 x 005 36 578 99 Extraction arm
Maximum extraction rate 230 m3/h of the unit 005 36 578 99 Extraction arm
Portable fume extraction kit for one work station
2 x 005 36 577 99 Slopped nozzle
Sound level 48 db (A) in 1 m distance Remote
Order No. 0V controlWFE2 with KIT alarm 2
005 36 266 99function T0053645699
005 36 577 99 Slopped nozzle 1
Two Workplaces 2 x 005 36 574 99 Stop valve
005 36 574 99 Stop valve
Standard connection pipe system 50 Noise
Order No. damped
10V metal housing WFE2S
• 1 Fume extraction unit WFE2S 2 x 005 365 75 99 Bench mounting bracket
005 365 75 99 Bench mounting bracket
Operating voltage 120/230 V / 50/60 Hz Quick and simple installation
• 2 Extraction arms with nozzle WFAN 005 36 576 99 Extraction hose
2 x 005 36 576 99 Extraction hose
Scope of supply
Power input 275 VA Option: WFE S with gas 50,filter
flexible, 50 mm diameter
Compact filter for adhesive fumes. Consists of:
• 2 Table-mounting sets WFTB 50 Order No. 230V 005 36 572 99
Maximum vacuum 2.700 Pa 005 36 266 99 WFE 2S Fume extraction
Order No. 230V 005 36 456 99
wide band gas filter (50 % active carbon / 50 % Puratex)
• 2 Seals WFFMP 50 Order No. 120V WFE2Kit1
Dimensions (L x W x H)
ESD safe low320 x 320 x 395 mm
sound level
unit 120/230 V / 50/60 Hz
Order No. 120V WFE2Kit2
• 2 Flexible hoses NWFine dust pre-filter
50 (3 m) 005 36 572 99 KIT 1 WF Sloped 60 for volume extraction
12.6 x 12.6 x 15.5 in Order No. 0V • ROHS &005 36 466 99
WEEE compliant
F7 consists of:
Weight 19 kg / 41.8 lb Order No. 10V WFE2SG 005 36 578 99 Extraction arm
The fume extraction unit WFE 2S is easy to
install and operate. It is designed as a smaller, 005 36 577 99 Slopped nozzle
WFE 2 Kit 1 WFE 2 Kit 2
005 36 574 99 Stop valve
nit central system and is supplied complete with WFE2 KIT 1 WFE2 KIT 2
005 365 75 99 Bench mounting bracket
11
flexible hose, arm and bracket, ready for instal-
Attributes 005 36 576 99 Extraction hose
lation at the workplace. A powerful, mainte-
nance-free pump provides continuous fume
Two kits available HEPA filter H13 Order No. 230V 005 36 572 99
extraction at a maximum air extraction rate of
Mobile fume extraction unit purifies air and Order No. 120V WFE2Kit1
ESD safe low sound level3
230 m at up/h. A built-in microprocessor controls the
to  workplaces Fine dust pre-filter
wide band gas filter
adjustable pump speed avoiding unnecessary
Electronic filter control and easy filter F7
waste of suction power and saving energy. To
exchange
The fume extraction unit WFE 2S is easy to
optimize the degree of pollutant separation,
 wheels to allow easy movement
install and operate. It is designed as a smaller, WFE 2 Kit 2
the WFE 2S can be modified with filters for
of the unit
central system and is supplied complete with
different applications.
Remote control with alarm function
flexible hose, arm and bracket, ready for instal- Portable fume extraction kit for one work station Portable fume extraction kit for two work stations
Noise damped metal housing
lation at the workplace. A powerful, mainte-
Quick and simple installation
nance-free pump provides continuous fume HEPA filter H13
Scope of supply Scope of supply
Scope of supply WFE 2S
extraction at a maximum air extraction rate of
42 Note: Some of the above items may require a freight lead
and
time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
005 36 266 99 WFE 2S Fume extraction
005 36 266 99 WFE 2S Fume extraction
230 m3/h. A built-in microprocessor controls the wide band gas filter
WFE 2S Fume extraction unit 120/230 V / 50/60 Hz
 VOLUME FUME EXTRACTION

WFE 4S® Pre-filter to extend capacity of

Weller WFE4S
Mobile fume extraction unit purifies WFE 2S, WFE 4S, WFE 2X
air up to 8 soldering workplaces Attributes
Description Material No. Shelf
Mobile fume extraction unit purifies air Pack
up to 8 workplaces
WFE4S T0053625699 1
The adjustable pressureThe control
Wellergua-
WFE4S fume extraction unit
rantees optimal air flowprovides regulation for extraction capability for up
volume
each working place independent to 6 work places.
of the A powerful maintenance
connected workplaces free variable speed motor provides an airflow
rate of 615m3/h at max speed. A built-in
Electronic filter control and easy filter
microprocessor controls the adjustable speed
exchange of the turbine. The airflow rate is continuously
 wheels to allow easy movement displayed digitally. The
of the unit microprocessor also ensures detection of
operating hours and the level status of filter
Remote control with alarm functionThe three-stageThe pre-filter is recommended for use with solder bath,

Tip Extraction
absorbency. filter is fitted as
Noise damped metal housing automatic soldering, laser or other major dust emitting
standard and is easy to replace, consisting
applications. It acts as a first stage in the filter process
of a fine particulate air filter and combined
Quick and simple installation increasing the lifetime of the main filter units. The pre-
submicron particulate air filter + wide band
filter can be fixed directly to the top of the WFE 4S or in
gas filter. The WFE 4S centralized system is
supplied complete with oneconjunction with the WFE 2S and WFE 2X as an external
pipe connector
(three optional) and is easilypart of the fume extraction system.
connected to the
pipe system. A wide range Scopeof pipeofaccessories
supply
including arms with conical nozzle,
Filter boxflat nozzle
small vent, extraction hood and tray provide for
2 x hose connections 75
maximum flexibility. Filters must be ordered separately
• ROHS & WEEE compliant
WFE 4S
Mobile fume extraction Technical Data WFE 4S: Pre-filter to extend capacity of
unit purifies
WFE
Dimensions Attributes 450 x 450 x 650 mm (L x W x H)
air up to 8 soldering workplaces
ESD safe
WFE 2S, WFE 4S, WFE 2X
low sound level
F5 Fine particulate air filterOrder No.
(10 pack) 005 87 358 62
T0058735837 Attributes 1
Weight Small,
Mobile fume21 kg portable, compressed air driven
extraction unit purifies air

Mains
up to 8 workplaces
The fume extraction system WFE 4S is user-
fume
The 230V
adjustable extraction
/ 50Hz
pressure control gua-unit
The powerful maintenance free variable speed The fume extraction unit WFE requires clean Up to  FE soldering irons can be
friendly with quick and simple installation and
Power rantees optimal air flow regulation for
Absorption 450VA turbine is electronically controlled and has a and oil-free compressed air. The vacuum is ge- connected
each working place independent of the
filter exchange. It has a low noise emission
Sound Level connected51 db(A) maximum capacity of 615 m /h. It has 3 opera- 3
workplaces
level and is small and convenient to locate
Electronic filter control and easy filter ting modes:
nerated by a maintenance-free compressed air Fine dust pre-filter F7
Maintenance-free compressed air
Max. Vacuum exchange 2.800 Pa
within the work area. 1. Standard speed control – selected by the user converter. The contaminated air is purified by a converter
Max. Conveyance  wheels 615 m3/h
to allow easy movement
F7 Fine main air filter (10 pack) T0058735836
of the unit
Max. Capacity Remote control Max.with 6 work places
alarm function
irrespective of the load on the system.
The pre-filter is recommended for use with solder bath,
pre-filter and main filter system. A compressed Portable unit1for stand alone applicatio
The high quality components used in the
Standard Noise damped metal housing
connector DN 70 2. Speed limiting control – the pump speed is
automatic soldering, laser or other major dust emitting
applications. It acts as a first stage in the filter process air cleaning filter removes additional odours
Quick and simple installation
3WFE 4S result in low servicing requirements automatically varied to match the load on
increasing the lifetime of the main filter units. The pre-
operating modes
and long system life. To increase filter lifetime
filter can be fixed directly to the top of the WFE 4S or in
the system.
conjunction with the WFE 2S and WFE 2X as an external
caused by the compressed air. This highly
(Normal-/ ECO-/ Regelmode)
and save on energy, the WFE 4S is fitted with
part of the fume extraction system.
Scope3. Economy control – the rate of fume
of supply
efficient filter system makes the WFE a genuine HEPA filter H13
LED for filter control
an automatic airflow speed control - depending Filter box
RS 232 interface for remote control
absorption is maintained at a constant value.
2 x hose connections 75 air recovery system. The filter-lift system allows and
on the number of connected workplaces. To The operating hours and the filter condition
Filters must be ordered separately
fast and convenient filter cartridge replace- wide band gas filter
extend the capacity an external pre-filter can
ESD safe low sound level
are recorded for maintenance purposes.
Order No. 005 87 358 62
H13 + Wide Band Gas Filter T0058735838 1
be fixed directly to the WFE 4S.
ment. The FE (Fume Extraction) soldering irons
(50% Active Carbon, 50% Puratex)
HEPA filter H13
The fume extraction system WFE 4S is user- The powerful maintenance free variable speed
are connected directly to the unit – additional
friendly with quick and simple installation and turbine is electronically controlled and has a
Adhesive Fumes Filter + Wide Band and
filter exchange. It has a low noise emission maximum capacity of 615 m3/h. It has 3 opera-
leads are not required.
Gas Filter T0058735835 1
level and is small and convenient to locate
within the work area.
ting modes:
1. Standard speed control – selected by the user
Fine dust pre-filter F7
(50% Active Carbon, 50% Puratex) wide band gas filter
irrespective of the load on the system.
The high quality components used in the 2. Speed limiting control – the pump speed is ESD safe low sound level
WFE 4S result in low servicing requirements
Technical
automatically varied to match the load on
Data Scope of supply
and long system life. To increase filter lifetime the system.
Maximum capacity
and save on energy, the WFE 4S is fitted with 8 workplaces
3. Economy control – the rate of fume HEPA filter H13 Pre-filter box T0058735862 1
Pre-filter to extend capacity of
an automatic airflow speed control - depending absorption is maintained at a constant value. WFE 4S Fume extraction unit 230/120 V / 50/60 Hz
and Scope
The of supply
pre-filter is recommended for use with
Maximum extraction rate
WFE 2S, WFE 4S, WFE 2X
on the number of connected workplaces. To Technical 615 m³/hData
The operating hours and the filter condition Compact filter
wide band gas filter
extend the capacity an external pre-filter can
solder bath, automatic soldering, laser or other
Sound level are recorded for maintenance purposes.
51 db (A) at 1 m distance
Maximum capacity Consists of: HEPA filter H13, wide band gas filter
2 FE soldering irons
be fixed directly to the WFE 4S. major dust emitting applications. It acts as a
Standard connection pipe system 75 (50 % active carbon, 50 % Puratex) WFE Fume extraction unit
first Option: WFE S with gas filter
stage in the filter process increasing the
purifies air Sound level < 39 db (A) at 1 m distance
Fine dust pre-filter F7 lifetime of the main filter Compact filter for adhesive fumes, consists of: Wide band
Compressed air cleaning filter
units. The pre-filter
Operating voltage 230/120 V / 50/60 Hz
can gas filter (50 % active carbon, 50 % Puratex)
be fixed directly to the top of the WFE4S or
Power input Maximum vacuum
450 VA 20.000 Pa Compact filter
trol Technical
gua- Data Scope of supply
Fine dust filter F7
in conjunction with the WFE2S and WFE2X as
Consists of: HEPA filter H13, wide band gas filter
Fine dust pre-filter F
Volume Extraction
Maximum capacity
Maximum vacuum
8 workplaces
Operating pressure
2.800 Pa 3,5 - 6 bar an external part of the fume extraction system.
ulation for
Maximum extraction rate
WFE 4S Fume extraction unit 230/120 V / 50/60 Hz
615 m³/hDimensions (L x W x H) 450 x 450 x 650 mm Order No. 0V (50 % active carbon, 50 % Puratex)
• Filter box
005 36 256 99 Order No. 0V 005 36 496 99
Air consumption
Compact filter
30 l/min
dentSound level
of the
Standard connection
51 db (A) at 1 m distance
pipe system 75
Consists of: HEPA filter H13, wide band gas filter
17.7 x 17.7 x 25.6 in
(50 % active carbon, 50 % Puratex) Option: WFE S Order
with gasNo.
filter10V • 2 Fine dust filter F7
WFE4S x hose connections 75Order No. 10V WFE4S
Operating voltage 230/120 V / 50/60 Hz Height
Fine dust pre-filter F7 200 mm (7.8 in)
Compact filter for adhesive fumes, consists of: Wide band Filters must be ordered separately
Weight 21 kg / 46.3 lb gas filter (50 % active carbon, 50 % Puratex)
Power input 450 VA
easyMaximum vacuum
filter 2.800 Pa
Diameter 140 mm (5.5 in)
Fine dust filter F7
Order No. 0V 005 36 402 99
Dimensions (L x W x H) 450 x 450 x 650 mm
17.7 x 17.7 x 25.6 in
Weight
Order No. 0V
Order No. 10V
005 36 256 99
WFE4S
2,7 kg / 5.9 lb
Order No. 0V
Order No. 10V
005 36 496 99
WFE4S
Order No. 10V WFE 
ement
Weight 21 kg / 46.3 lb

WFE 2ES / WFE 2CS 

unction The pre-filter is recommended for use with solder bath,
Fume extraction unit
g as Weller
economical
®
WFE2ES Kit
solution WFE P
automatic soldering, laser or other major dust emitting
applications. It acts as a first stage in the filter process Attributes
Attributes
n
Small, portable, electrically driven
increasing the lifetime of the main filter units. The pre-
filter can be fixed directly to the top of the WFE 4S or in WFE2ES
The Weller ES® WFE P is a line voltage fume
Mobile KIT
fume extraction unit purifies air T0053650599 1
Up to  FE soldering irons can be
fume extraction unit
conjunction with the WFE 2S and WFE 2X as an external Economyup2 Port Volume Extraction Unit
to  workplaces
part of the fume extraction system. extraction unit designed to run with one or two
• Up to Maximum
Easy filter2exchange
Work Stations connected
Scope of supply •FE (Fume Extraction) soldering irons. The WFE P
Brushless
QuickECand
Extractor
simpleFan
installation Electric vacuum pump to produce the
• Maximum AirflowSpeed
Optional: 200mcontrol
3
h (WFE CS)
Filter box has an electric, long-life, soundproofed vacuum
• Maximum Vacuum 1800Pa
required vacuum
2 x hose connections 75
Filters must be ordered separately •pump to produce the required vacuum – it does
F5 Pre-Filter  power stages for higher extraction
•not need a compressed air supply. The vacuum
H12 Main Filter (Activated Carbon perfomance with  FE soldering irons
Order No. 005 87 358 62 Foam)
pump has two power settings which can be se-
• Low Noise Level Portable unit for stand alone applicatio
lected by means of rocker switches depending
ariable speed WFE2ES KIT
on the number of FE soldering irons connected T0053651699 1
d and has a 1 Workstation Kit
t has 3 opera-
to the unit. This saves energy. The motor is
• 1 x WFE2ES
Fine dust pre-filter F7 •maintenance-free and has a thermal over load
1 x Extraction Arm
• 1 x Table Mount Kit
ted by the user to protect the unit. The filter lift system allows
system.
• 1 x Length Hose HEPA filter H13
fast and convenient main filter replacement.
ump speed is and
FE soldering irons are connected directly to unit
the load on ESD safe low sound level wide band gas filter
Portable fume extraction kit for one work station – additional leads are not required.
ESD safe low sound level
fume HEPA filter H13
constant value. The fume extraction unit WFE 2ES is easy to
and Scope of supply

lter condition install and operate. It is designed as a smaller

wide band gas filter 005 36 506 99 WFE 2ES Fume extraction unit
Technical Data
central system and is supplied complete with
purposes. Compact filter
flexible hose, arm and bracket, ready for instal- Consists of: HEPA filter H12, active carbonate foam Scope of supply Fine dust pre-filter F5
Maximum capacity 2 FE soldering irons
Note: Some of the above items may require a freight
lation at the workplace. lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
Fine dust pre-filter F 5 43
Sound level < 45 db (A) at 1 m distance
005 36 571 99 KIT 1 WF Funnel 60 for volume extraction
 FUME EXTRACTION

Exploding Drawing for WFE2P Installation Option for a Central System with WFE P

KH E
Stop + Go-support

WDD 161V

WFE P

soldering
iron
desoldering
iron

Installation Option for a Central and Stand Alone System with WFE 20D

central system stand alone system

with pipe system 50
upto ca. 200 m

right angle
pipe 50 pipe 50 T-piece 50 pipe 50 branch 50
005 36 322 99 005 36 323 99 005 36 344 99 005 36 323 99 005 36 321 99

end seal 50
extraction hose 5 mm 005 36 324 99
pipe clamps 50
> 2,5 m bis max. 10 m connecting nipple 005 36 329 99
005 25 410 00 double socket 50 for extraction hose
WSD 81 connecting element 40-50 005 36 319 99 5 mm
005 36 415 99 connecting nipple pipe 50
005 36 338 99 for hose 17
connecting 005 36 323 99
element 40-50 005 36 358 65
005 36 415 99
WMD 3

end seal 50
ESD
SAF
E

005 36 324 99
extraction
hose 40
005 36 414 00

extension hose 17
005 36 326 99

adapter 17
005 36 343 99

WFE 20D

RS 232 cable (2 m)
005 31 191 99

remote control
005 87 359 09

44 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 FUME EXTRACTION

lation Options
Installation Option for a Central System with WFE 2S
Total pipe length 15m
ion option for a central system Kit1 WF Sloped 60 Kit1 WF Funnel 60

nstallation Options
005 36 572 99 005 36 571 99
E 2S
rubber hose
005 87 627 52 rubber hose rubber hose
connecting piece extraction hose 60 005 87 627 52 005 87 627 52
e length 1 m (0. in) 005 87 627 51
O-ring 3m
connecting piece
005 87 627 51 pipe 50 mm
connecting piece
005 87 627 51
rubber hose
005 87 627 52

stallation option for a central system 005 87 627 53 005 36 576 99 O-ring O-ring connecting piece
Kit1 WF Sloped 60 005 87 627 53 T piece 50 mm 005 87 627 53 005 87 627 51 Kit1 WF Funnel 60
005 36extraction
572 99 arm 60 O-ring 005 36 571 99
ith WFE 2S bench mounting bracket 60
005 36 578 99
WD 1000T
005 87 627 53

extraction arm 60
005 36 574 99 rubber hose
005 87 627 52 nozzle sloped rubber hose rubber hose 005 36 578 99
connecting piece 005 36 577 99extraction hose 60 005 87 627 52 005 87 627 52
otal pipe length 1 m (0. in) 005 87 627 51
O-ring
005 87 627 53
3m
005 36 576 99
connecting piece
005 87 627 51
O-ring
connecting piece
pipe 50 mm 005 87 627 51
O-ring
rubber hose
005 87 627 52
connecting piece WF nozzle funnel
rubber hose
005 87 627 52 005 87 627 53 T piece 50 mm 005 87hose
extraction 627 53
60 005 87 627 51 005 36 573 99
extraction arm 60 O-ring WR3M
connecting piece 3m
damper WFV 60 005 36 578 99 005 87 627 51 hose connection 005 87 627 53
WD 1000TO-ring 50 90 005 36 576 99
005 36 574 99 bench mounting bracket 60
005 87 627 53 005 87 358 48 extraction arm 60
005 36 574 99
nozzle sloped hose connection 50 damper WFV 60 005 36 578 99
005 36 577 99 005 87 358 47 005 36 574 99

rubber hose WF nozzle funnel

005 87 627 52 extraction hose 60 005 36 573 99
WR3M
connecting piece 3m
damper WFV 60 005 87 627 51 hose connection
O-ring 50 90 pipe system suitable for576 99
005 36
005 36 574 99
005 87 627 53 005 87 358 48 WFE 2S / WFE 2ES
hose connection
and WFE 2X 50 damper WFV 60
005 87 358 47 005 36 574 99

extraction hose 60
sold by meter
rubber hose
005 87 627 52 005 87 354 27
pipe system suitable for
connecting piece WFE 2S / WFE 2ES
005 87 627 51 RS 232 cable (2 m)
O-ring 005 31 191 99 and WFE 2X
005 87 627 53

extraction hose 60
sold by meter remote control
WSD 81 rubber hose
005 87 627 52 005 87 354 27 005 87 359 09
connecting piece
metal exhaust hood
005 87 627 51 RS 232 cable (2 m)
O-ring 005 87 358 45 005 31 191 99
005 87 627 53

remote control
WSD 81 005 87 359 09

metal exhaust hood

005 87 358 45

rubber hose
ion option for a central and
Installation
hose connection 50
Option005for
005 87 627 52
a Central and Stand Alone System with WFE
87 358 47
4S
connecting piece
Kit WF Funnel 60
005 36 571 99
005 87 627 51
one system with WFE 4S hose connection 70 90
005 87 358 33
O-ring
005 87 627 53
Total pipe length 30m rubber hose damper WFV 60
WF extraction arm 60
005 36 578 99
stallation option for a central and hose connection 50
005 87 358 47
005 87 627 52
005 36 574 99 Kit WF Funnel 60

eand
length 0system
m (1181.10
with in)
connecting piece 005 36 571 99
005 87 627 51 WF nozzle funnel
alone WFE 4S hose connection 70 90
005 87 358 33
O-ring
005 87 627 53
005 36 573 99
WF extraction arm 60
damper WFV 60 005 36 578 99
rubber hose pre-filter box 005 36 574 99

otal pipe length 0 m (1181.10 in) 005 87 627 52

connecting piece
005 87 358 62 WSBWF
150nozzle funnel
005 36 573 99
005 87 627 51 pipe 75
O-ring 005 87 358 70
005 87 627 53
pipe 75 T piece 75 right angle pipe 75
rubber hose pre-filter box005 87 359 32 005 87 358 71 005 87 358 69
005 87 627 52 005 87 358 62 WSB 150
connecting piece
extraction hose 60 005 87 627 51 pipe 75
sold by meter O-ring extraction hose 75 005 87 358 70 rubber hose
005 87 354 27 005 87 627 53 005 87 353 13 pipepipe
clamps
pipe 75 005 75
T piece 87 627 52 right angle 75 75
005 87 359 32 87 358 71 piece 005 87 005
005connecting 87 358 64
358 69
005 87 627 51
O-ring
extraction hose 60 005 87 627 53
sold by meter hose
extraction clamp
hose 75 70-90 adapter 75/50
rubber hose
005 87WFE
354 27
4S 005 87 005
353 87
13 358 31 005 87 627 52 005 87 358 56clamps 75
pipe
T piececonnecting
75 piece 005 87 358 64
extraction hose 60 005 87 005
3588771627 51
3m O-ring
005 36 clamp
hose 576 9970-90 005 87 627 53 rubberadapter
hose 75/50
005 87 358 31 005 87005
62787 52358 56
WFE 4S connecting piece
T piece 75 005 87 627 51
extraction hose 60 005 87 358 71O-ring
3m 005 87 627 53
005 36 576 99 rubber hose
RS 232 cable (2 m) 005 87 627 52
005 31 191 99 connecting piece
rubber hose 005 87 627 51
remote control O-ring
005 87 627 52 005 87 359 09 005 87 627 53
connecting piece Kit WF Sloped 60
005 87 627 51 RS 232 cable (2 m) 005 36 572 99
O-ring 005 31 191 99 160
005 87 627 53
rubber hose remote control
005 87 627 52 005 87 359 with
09 stativ extraction
connecting piece extraction arm Kit WF arm 60 60
Sloped
005 87 627 51 005 36 989 99 005005
36 578 99 99
36 572
O-ring 160
extraction hose 60
005 87 627 53 3m
extraction arm with stativ 005 36 57 699 extraction arm 60WF nozzle sloped
005 36 989 99 005 36 578 99 005 36 577 99
extraction hose 60
end seal 75 3m
005 36 57 699 WF nozzle sloped
WD 2000M 005 87 358 55
005 36 577 99
WFE 8S

end seal 75
WD 2000M 005 87 358 55
WFE 8S
RS 232 cable (2 m)
005 31 191 99
bench mounting bracket 60
005 36 574 99
RS 232 cable (2 m) damper WFV 60
005 31 191 99
005 36 574 mounting
bench 99 bracket 60
remote control 005 36 574 99
005 87 359 09
damper WFV 60

remote control
005 87 359 09
005 36 574 99
1
1

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 45
 FUME EXTRACTION

Accessories for Pipe System 50 and Pipe System 75 Tubing Systems

Description Material No.

P/code P/code
SYS50 SYS75

2m tube with socket 58735870

T0053632399

90° bow with socket 58735869

T0053632299

T-distributor 2 x 90° bow with socket 58735871

T0053634499

2 x 45° bow with socket Not Applicable

T0053632199

Double socket 58735318

T0053631999

Tube end cap 58735855

T0053632499

Tube clamp DN50 T0053632999

Tube clamp DN75 58735864

Tube Reductions

Reduction from SYS75 to SYS50 with seals T0058735863

Reduction from SYS75 to SYS50 without seals T0058735856

Exhaust Assembly

DN100 90° bow with socket for WFE10 and WFE35 T0053635399

2m breather tube 100mm without seal for WFE20D T0053631599

and WFE4S

Exhaust flange for DN100 tube (only for use with T0058735919
WFE10)

Exhaust flange for DN100 tube (only for use with T0058735840
WFE4S)

Exhaust Adaptor 75 for WFE25 T0058735920

46 Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
 Volume Extraction
Accessories When soldering, gluing or working with The Weller® 60 mm (2.36 in) flexible extraction
solvents it is important to place the nozzle arms allow the quiet and efficient capture of

FUME EXTRACTION as close to the source as possible to prevent

harmful particles and gases being spread into
polluted air. The arms and nozzles are simple
to install due to the click-on funnels and can
work area. easily be fixed into the required position.
Accessories When soldering, gluing or working with The Weller® 60 mm (2.36 in) flexible extraction
solvents it is important to place the nozzle arms allow the quiet and efficient capture of
as close to the source as possible to prevent polluted air. The arms and nozzles are simple
Accessories for Tip Suction harmful particles and gases being spread into to install due to the click-on funnels and can
work area. easily be fixed into the required position.
Order No. Description
005 87 358 47Description
Hose connection 50 for WFE 2S and WFE 4S, e.g. for the direct connection Material No.
of accessories by means of 50 mm (1.96 in) extraction hose. Plastic, black.

Order No. Description

005 87 358 47 Hose connection 50 for WFE 2S and WFE 4S, e.g. for the direct connection
of accessories by means of 50 mm (1.96 in) extraction hose. Plastic, black.
005 87 358 32Extraction Hose, 1m.
Hose connection 75 for 40mm
WFE 2S andDIA. Complete
WFE 4S, with totwo
e.g. for connection a stand alone T0053631699
system by means 75 mm (2.95 in) pipe or 75 mm (2.95 in) extraction hose. Plastic, black.
connecting ones for direct connection to WFE20D
005 87 358 32 Hose connection 75 for WFE 2S and WFE 4S, e.g. for connection to a stand alone
system by means 75 mm (2.95 in) pipe or 75 mm (2.95 in) extraction hose. Plastic, black.

005 87 358 48 Hose connection 50, 90° for WFE 2S and WFE 4S, e.g. for the direct connection of
accessories by means of 50 mm (1.96 in) extraction hose. Plastic, black.
005 87 358 48 Hose Extraction Hose,
connection 50, 90° for WFE40mm
2S and WFE DIA. Sold
4S, e.g. for byconnection
the direct the metre.
of T0053641400
accessories by means of 50 mm (1.96 in) extraction hose. Plastic, black.

005 87 358 33 Hose connection 75, 90° for WFE 2S and WFE 4S, e.g. for connection to a stand alone
005 87 358 33 system75,
Hose connection by90°
means of 75
for WFE mmWFE
2S and (2.95
4S,in)
e.g.pipe or 75 mmto(2.95
for connection in)alone
a stand extraction hose. Plastic, black.
system by means of 75 mm (2.95 in) pipe or 75 mm (2.95 in) extraction hose. Plastic, black.
Extraction Hose, 60mm (2.36 in), for connection to T0053657699
pipe system 50. 3m (118.11 in). Plastic, grey/black,
0051387 353 13 Extraction hose 75,in),øfor
75connection
mm (2.95toin),
pipefor connection to pipe system 75.
005 87 353 flexible.
Extraction hose 75, ø 75 mm (2.95 system 75.
Sold
Sold by metre. by metre.
Plastic, Plastic,
grey/black, grey/black, flexible.
flexible.

005 36 576 99 Extraction hose 60, ø 60 mm (2.36 in), for connection to pipe system 50.
005 36 576
3 m99 Extraction
(118.11 in). hose flexible.
Plastic, grey/black, 60, ø 60 mm (2.36 in), for connection to pipe system 50.
Extraction
3 m (118.11Hose, 60mm
in). Plastic, (2.36
grey/black, in), for connection to
flexible. T0058735427
pipe system 50. Sold by metre. Plastic, grey/black,
005 87 354 27 flexible.
Extraction hose 60, ø 60 mm (2.36 in), for connection to pipe system 50.
Sold by metre. Plastic, grey/black, flexible.
005 87 354 27 Extraction hose 60, ø 60 mm (2.36 in), for connection to pipe system 50.
Sold by metre. Plastic, grey/black, flexible.

005 87 358 79 Hose clamp 50 – 70 mm, (1.96 - 2.75 in), 2 units, for securing extraction hose 50.
Connection Cone for Extraction Hose T0053641599
005 87 358 79 Hose clamp 50 – 70 mm, (1.96 - 2.75 in), 2 units, for securing extraction hose 50.
005 87 358 31 Hose clamp 70 – 90 mm, (2.75 - 3.54 in), 2 units, for securing extraction hose 75.

005 87 358 31 Hose clamp 70 – 90 mm, (2.75 - 3.54 in), 2 units, for securing extraction hose 75.
17mm DIA x 5m Extension Hose. Used where fume T0053632699
1 extraction iron is further than 2.5m from pipe system.

1
Adaptor from DN17 to 5mm suction hose T0053634399
(M8 x 1)

Volume Extraction Hose Connector for Hose 5mm (M8 x 1) T0053633899

Accessories Connection Nipple

When soldering, gluing or working with The Weller® 60 mm (2.36 in) flexible extraction T0058735865
solvents it is important to place the nozzle arms allow the quiet and efficient capture of
as close to the source as possible to prevent polluted air. The arms and nozzles are simple
harmful particles and gases being spread into to install due to the click-on funnels and can
work area. easily be fixed into the required position.

3/8” Nut T0058735866

Order No. Description
005 87 358 47 Hose connection 50 for WFE 2S and WFE 4S, e.g. for the direct connection
of accessories by means of 50 mm (1.96 in) extraction hose. Plastic, black.

005 87 358 32 Hose connection 75 for WFE 2S and WFE 4S, e.g. for connection to a stand alone
system by means 75 mm (2.95 in) pipe or 75 mm (2.95 in) extraction hose. Plastic, black.
P/code P/code
50mm 75mm
005 87 358 48 Hose connection 50, 90° for WFE 2S and WFE 4S, e.g. for the direct connection of
accessories by means of 50 mm (1.96 in) extraction hose. Plastic, black.

Suction flange for WFE2S and WFE4S T0058735832 T0058735832

005 87 358 33 Hose connection 75, 90° for WFE 2S and WFE 4S, e.g. for connection to a stand alone
system by means of 75 mm (2.95 in) pipe or 75 mm (2.95 in) extraction hose. Plastic, black.

Suction flange 90° for WFE2S and WFE4S T0058735847

005 87 353 13 Extraction hose 75, ø 75 mm (2.95 in), for connection to pipe system 75. 5873583
Sold by metre. Plastic, grey/black, flexible.

005 36 576 99 Hose NW50

Extraction hose 60,for DN40
ø 60 mm (2.36 in), tube system
for connection (metre
to pipe system 50. goods) T0058735327
3 m (118.11 in). Plastic, grey/black, flexible.

Hose NW75 for DN70 tube system (metre goods)

005 87 354 27 Extraction hose 60, ø 60 mm (2.36 in), for connection to pipe system 50. T005873531
Sold by metre. Plastic, grey/black, flexible.

005 87 358 79 Hose clamp

Hose clamp 50 – 70 (2
mm,pieces)
(1.96 - 2.75 in), 50-70mm for hose
2 units, for securing extraction hose 50.NW50 T005735879 T0058735831
Hose clamp (2 pieces) 70-90mm for hose NW75
005 87 358 31 Hose clamp 70 – 90 mm, (2.75 - 3.54 in), 2 units, for securing extraction hose 75.

1

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 47
 FUME EXTRACTION

Accessories for Tip Suction

The following products are suitable for 50mm Diameter. When using a 75mm Diameter Hose, a tube reducer will be required (see page 46)

Description Material No.

Extraction table, active surface 600 x 350mm connectable from sides or below for T0053637099
tube system DN40, especially for the extraction of diagreeable solvent or adhesive
smells.

Metal table extraction hood 200 x 100mm connectable to the DN40 tube system. T0058735845
Suitable for the extraction of solder fume in hot air applications or for
work at small circuit boards.

One joint extraction arm, flexible, for bench assembly Ø 50mm, includes clamp holder, T0058735849
air flow adjustable, ESD Safe

Order No. Description

005 36 598 99 Stativ extraction arm, 60 mm diameter, flexible extraction arm

W Stativ extraction arm, 60mm diameter, flexible extraction arm with articulated joint T0053659899
NE
with articulated joint and airflow control valve and bench clamp. ESD safe.

and airflow control valve and bench clamp. ESD Safe

005 36 578 99 Flexible extraction arm, 60 mm (2.36 in) diameter, for sloped and funnel nozzles.
Maximum length 1 m (39.37 in), ESD safe.
ESD SAFE

005 36 577 99 WF 60 sloped nozzle

200 mm
for flexible and stativ extraction
200 mm
300 mm

arm.
WFAN 50 Extraction arm Ø 50 mm, flexible, with nozzle Ø 50 mm, ESD safe, needs300 mm 300 mm

200 mm
T0053637499
WFFMP 50 seal
100 mm 100 mm 100 mm
150 mm 150 mm 150 mm
0 mm 0 mm 0 mm

100 mm 100 mm

200 mm 200 mm

300 mm 300 mm
300 mm

200 mm

100 mm

100 mm

200 mm

300 mm

300 mm

200 mm

100 mm

100 mm

200 mm

300 mm

300 mm

200 mm

100 mm

100 mm

200 mm

300 mm
0 mm

0 mm

0 mm

005 36 573 99 WF funnel nozzle 60, for flexible and stativ extraction arm, 100 mm (3.93 in) diameter.

WFAF 50 Extraction arm Ø 50 mm, flexible, with slot 210 x 20 mm, ESD safe, needs T0053637299
100 mm

200 mm

300 mm

WFFMP 50 seal
300 mm

200 mm

100 mm

100 mm

200 mm

300 mm

005 87 358 45 Exhaust hood, 200 x 100 mm (7.87 x 3.93 in), recommended for use with hot air
soldering operations uses extraction hose 60.

Order No. Description

Order
005 36 598 No.99 Description
Stativ extraction arm, 60 mm diameter, flexible extraction arm
005 36 598 99 with Stativ extraction
articulated joint andarm, 60 mm
airflow diameter,
control valveflexible extraction
and bench clamp. arm
ESD safe.
005 36 380 99 WFDD 50 Extraction plate with 1 m (39.37 in) flexible hose, 300 x 210 mm
with
(11.81 x 8.26 in), for adhesive and articulated
solvent jointESDand
fume extraction. WFAS 50 Extraction arm Ø 50 mm, flexible, with slot 210 x 20 mm,
safe.airflow control valve and bench clamp. ESD safe. T0053637399
ESD safe, needs WFFMP 50 seal

005 36 578 99 Flexible extraction arm, 60 mm (2.36 in) diameter, for sloped and funnel nozzles.
005 36 578 99 Flexiblelength
Maximum extraction arm,
1 m (39.37 in),60ESD
mmsafe.
(2.36 in)1diameter, for sloped and funnel nozzles.
Maximum length 1 m (39.37 in), ESD safe.
EW
OrderNNo. Flexible Extraction arm, 60mm (2.36 in) diameter, for sloped and funnel nozzles.
Description T0053657899
Maximum length 1m (39.37 in), ESD Safe
005 36 598 99 Stativ extraction arm, 60 mm diameter, flexible extraction arm 300 mm 300 mm 300 mm

005 36 577 99
005 36 577 99
with articulated joint and airflow control valve and bench clamp. ESD safe.
WF 60 sloped nozzle for flexible and stativ extraction arm.
WF 60 sloped nozzle for flexible and stativ extraction arm. 150 mm
200 mm
300 mm
100 mm
200 mm 150 mm
200 mm
300 mm
100 mm
200 mm 150 mm
200 mm
300 mm
100 mm
200 mm
ESD SAFE
0 mm 0 mm 0 mm
100 mm 100 mm 100 mm

Order No. Description

150 mm 150 mm 150 mm
100 mm 100 mm
0 mm 0 mm 0 mm
200 mm 200 mm

W
100 mm 100 mm

005 36WF60
598 99sloped
Stativ extraction
60mmarm, 60 mm diameter, flexible extraction
stativarm
NE nozzle, diameter, for flexible and extraction arm. T0053657799
300 mm 300 mm
200 mm 200 mm
300 mm

200 mm 300 mm

100 mm

100 mm

200 mm

300 mm 200 mm

300 mm

200 mm 300 mm

100 mm

100 mm

200 mm

300 mm 200 mm

300 mm

200 mm 300 mm

100 mm

100 mm

200 mm

300 mm 200 mm
0 mm

0 mm

0 mm

300 mm 300 mm

with articulated joint and airflow control valve and bench clamp. ESD safe.
200 mm

100 mm

100 mm

300 mm

200 mm

100 mm

100 mm

300 mm

200 mm

100 mm

100 mm

300 mm
0 mm

0 mm

0 mm

005 36 573 99 WF funnel nozzle 60, for flexible and stativ extraction arm, 100 mm (3.93 in) diameter.
005 36 573 99 WF funnel nozzle 60, for flexible and stativ extraction arm, 100 mm (3.93 in) diameter.

Extraction arm, can be mounted directly to work bench, ESD Safe 100 mm

200 mm
T0053634899
100 mm

005 36 578 99 Flexible extraction arm, 60 mm (2.36 in) diameter, for sloped and funnel nozzles.
300 mm
200 mm

300 mm
300 mm

200 mm

100 mm

100 mm

200 mm

300 mm 200 mm

005 36 578 99 Flexible extraction arm, 60 mm (2.36 in) diameter, for sloped and funnel nozzles.
Maximum
Extraction arm,length
flexible, 1 ESD
m (39.37 in),useESD
Safe, metal blacksafe. T0058735853
300 mm

200 mm

100 mm

100 mm

300 mm

005 87 358 45 Maximum

Exhaust hood, 200 length
x 100 mm (7.87 x 3.931in),mrecommended
(39.37 in),forESD safe.
with hot air
005 87 358 45 Exhaust
soldering hood, 200
operations x 100
uses mm (7.87
extraction x 3.93
hose 60. in), recommended for use with hot air
soldering operations uses extraction hose 60.

WFDD50 Extraction Plate T0053638099

005 36 380 99 WFDD 50 Extraction plate with 1 m (39.37 in) flexible hose, 300 x 210 mm
300 mm 300 mm 300 mm
005 36 380 99 WFDD
005 36(11.81
577 9950 Extraction
x 8.26
WFplate
60 with
in), for adhesive 1 m (39.37
and solvent
sloped fume
nozzle in)extraction.
200 mm

(11.81 x 8.26 in), for adhesive and solvent fume

flexible hose,
ESD300
for flexible safe.x 210 mm
and stativ
extraction. ESD safe.
extraction
200 mm
arm. 200 mm

100 mm 100 mm 100 mm

150 mm 300 mm 150 mm 300 mm 150 mm 300 mm
0 mm 0 mm 0 mm

005 36 577 99 WF 60 sloped nozzle

200 mm
for flexible and stativ extraction
200 mm
arm. 100 mm 100 mm
200 mm

100 mm 200 mm 100 mm 200 mm 100 mm

WFCC50 Exhaust
150 mm
Head 0 mm
150 mm
300 mm
0 mm
300 mm
150 mm
0 mm
T0053637899
300 mm

200 mm

100 mm

100 mm

200 mm

300 mm

300 mm

200 mm

100 mm

100 mm

200 mm

300 mm

300 mm

200 mm

100 mm

100 mm

200 mm

300 mm
0 mm

0 mm

0 mm

100 mm 100 mm
1
200 mm 200 mm
1
005 36 573 99 WF funnel nozzle 60, for flexible and stativ extraction arm,
300 mm100 mm (3.93 in) diameter. 300 mm
300 mm

200 mm

100 mm

100 mm

200 mm

300 mm

300 mm

200 mm

100 mm

100 mm

200 mm

300 mm

300 mm

200 mm

100 mm

100 mm

200 mm

300 mm
0 mm

0 mm

0 mm

W WF funnel nozzle 60, for flexible and stativ extraction arm, T0053657399
NE 100mm (3.93 in) diameter.
100 mm

200 mm

005 36 573 99 WF funnel nozzle 60, for flexible and stativ extraction arm, 100 mm (3.93 in) diameter.
300 mm
300 mm

200 mm

100 mm

100 mm

200 mm

300 mm

005 87 358 45 Exhaust hood, 200 x 100 mm (7.87 x 3.93 in), recommended for use with hot air
soldering operations uses extraction 100 mm
hose 60.

200 mm

300 mm
300 mm

200 mm

100 mm

100 mm

200 mm

300 mm

005 36 380 99 WFDD 50 Extraction plate with 1 m (39.37 in) flexible hose, 300 x 210 mm
(11.81 x 8.26 in), for adhesive and solvent fume extraction. ESD safe.
005 87 358 45 Exhaust hood, 200 x 100 mm (7.87 x 3.93 in), recommended for use with hot air
48 Note: Some of the abovesoldering operations
items may require a freightuses
leadextraction
time. Producthose 60. are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST.
depictions
 Accessories
FUME EXTRACTION
Order No. Description
Accessories for Tip Suction 005 36 574 99 WFV 60 Stop valve. Table connector for 60 mm (2.36 in) flex arm and extraction tube
including air flow valve.
The following products are suitable for 50mm Diameter. When using a 75mm Diameter Hose, a tube reducer will be required (see page 42)
Volume Extraction
Description Material No.
005 36 575 99 Bench mounting bracket. Maximum width of clamp 100 mm (3.93 in).
100 mm (3.93 in) diameter. Metal, black.
Extraction hood PE transparent, 296 x 248 mm (11.65 x 9.75 in) T0053634999

Accessories
WFFMP 50 seal,Extraction
locking adjustable T0053637199

Volume Extraction
005 36 348 99 arm, can be mounted directly to work bench, ESD safe.
Order No. Description
005 36 574 99 WFV 60 Stop valve. Table connector for 60 mm (2.36 in) flex arm and extraction tube
including air flow valve.

WFTB 50 Table mounting set T0053637999

005 87 627 53 Silicone O-ring, 50 mm (1.96 in) diameter.
Seal for 60 mm (2.36 in) flex arm directly on WFE 2S and WFE 2ES.
005 36 575 99 Bench mounting bracket. Maximum width of clamp 100 mm (3.93 in).
100 mm (3.93 in) diameter. Metal, black.
Accessories 005 87 358 53 Extraction arm, flexible, ESD safe, metal black.
Bench mounting bracket. Maximum width of clamp 100mm (3.93 in). T0053657599
100mm (3.93 in) in diameter. Metal, black.
005 36 348 99 Extraction arm, can be mounted directly to work bench, ESD safe.
Order No. Description
005
005 36
36 349 99
574 99 Extraction
WFV 60 Stop hood PE transparent,
valve. 296for
Table connector x 248 mm (2.36
60 mm (11.65in)
x 9.76 in). and extraction tube
flex arm
including air flow valve.
WFV 60 Stop valve. Table connector for 60mm (2.36 in) flex arm and extraction tube T0053657499
includingSilicone
005 87 627 53
air flow valve.
O-ring, 50 mm (1.96 in) diameter.
Seal for 60 mm (2.36 in) flex arm directly on WFE 2S and WFE 2ES.
005
005 87
36 627 50
575 99 60/50
BenchAdapter forbracket.
mounting applications using the
Maximum 60 mm
width (2.36 100
of clamp in) extraction
mm (3.93 system
in).
005 87 358 53 Extraction arm, flexible,
connected ESDformer
to the safe, metal black. and WFFMP50.
50WFTB
Exhaust accessories to blow waste Order No. Description 100 mm (3.93 in) diameter. Metal, black.
air out of a building 005 87 359 20
60/50 Adapter for applications using the 60mm (2.36
Exhaust adapter of pipe 100 to fume extraction unit WFE 20D.
in) extraction system connected T0058762750
to the former WFTB50 and WFFMP50.
005 87 358 40 Exhaust adapter of pipe 100 to fume extraction unit WFE 4S.
005 36 349 99 Extraction hood PE transparent, 296 x 248 mm (11.65 x 9.76 in).

005 87 359 15005 36 348 99

Hanging device
Exhaust Extraction
foroftable
adapter arm, canextraction
pipe 75mounting
for fume be
formounted
fume directly
WFE 2S. to work
unitextraction unitbench, ESD safe.
WFE2X. T0053659199

Accessories for WFE 2X Trolley for fume extraction unit WFE2X. T0053659299
Remote control 005 87Order
627 50No. 60/50 Adapter
Description
for applications using the 60 mm (2.36 in) extraction system
Order No. Description
for tip and volume 005 36 591connected
99 to the former
Hanging 50WFTB
device forand WFFMP50.
table mounting for fume extraction unit WFE 2X.
005 87 359 09 Remote control for fume extraction units WFE 20D, WFE 2S, WFE 4S and WFE 8S.
extraction units Remote
005 87 627 53control for O-ring,
Silicone tip and 50 volume
mm (1.96 in)extraction
diameter. units
Switching unit on/off, speed setting (only WFE 2S / WFE 4S), filter status display.
Seal for 60 mm (2.36 in) flex arm directly on WFE 2S and WFE 2ES.
Remote control for fume extraction units WFE20D, WFE2S, WFE4S and WFE8S. T0058735909
Switching
005 36 593 99005
005 87
36 358
592 99
Remote unit on/off,
53control
Trolley speed
Extraction arm,setting
forextraction
for fume fume (only
flexible,
extraction
unit WFE 2XWFE2S/WFE4S),
ESD
unitsafe,
WFE2metal
with 2X. black.
m (78.74 filter status display.
in) cable.
Remote control for fume extraction unit WFE2X with 2m (78.74 in) cable.
Interface cable RS 232, 2m (78.74 in) for remote monitoring by PC (type 1:1). T0053659399
Accessories for WFE 2X 005 31 Order
191 99No. Interface cable RS 232, 2 m (78.74 in) for remote monitoring by PC (type 1:1).
Description T0053119199
005 36 591 99 Hanging device for table mounting for fume extraction unit WFE 2X.
005 36 349 99 Extraction hood PE transparent, 296 x 248 mm (11.65 x 9.76 in).

005 36 592 99 Trolley for fume extraction unit WFE 2X.

SpareSpare Part Filters
1 Part Filters

005 87 627 50 60/50 Adapter for applications using the 60 mm (2.36 in) extraction system
Spare filter for WFE8S:
Order No. Spare filter WFE 8S: Order No. WFE 2X: to the former
Spare filter forconnected Order50WFTB
No. and WFFMP50.
Spare filter for WFE 4S:
Replacement pre-filter T0053659499
005 36 594 99 Replacement pre-filter 005 36 590 99 Replacement compact filter 005 87 358 37 Fine dust filter F5 (10 pieces)
Replacement compact filter (4 pieces in one pack) Consists of: HEPA filter H13, wide T0053659599
005 36 595 99 Replacement compact filter Consists of: HEPA filter H13, 005 87 358 36 Fine dust filter F7 (10 pieces)
band gas filter (50% active
wide band gas filter (50 %
carbon, 50% Puratex)
005 87 358 38 Compact filter
(4 pieces in one pack)
1
Consists of: HEPA filter H13, active carbon, 50 % Puratex) Consists of: HEPA filter H13,
wide band gas filter (50 % Spare filter for WFE2X: wide band gas filter (50 %
active carbon, 50 % Puratex) Replacement compact filter active carbon, 50 % Puratex) T0053659099
Consists of: HEPA filter H13, wide band gas
005 87 358 35filter (50%Adhesive
Option: active fume
carbon,
filter 50% Puratex)
(50 % active carbon, 50 %
Accessories for WFE 2X Order No. filter for
Spare Description
WFE4S: Puratex)
Fine
005 dust99filter F5
36 591 (10 pieces)
Hanging device for table mounting for fume extraction unit WFE 2X. T0058735837
Fine dust filter F7 (10 pieces) T0058735836
Compact filter T0058735838
Consists of: HEPA filter H13, wide band gas filter (50% active carbon, 50% Puratex)
Order No. Spare filter for WFE 2S: Order No. Spare filter for WFE
Option: fume2ES: Order No. carbon,Spare filter WFE 2S/WFE 4S:
005 36 592Adhesive
99 Trolley filter
for fume(50% active
extraction unit WFE 2X.50% Puratex)
005 87 358 84 Fine dust filter F5 (10 pieces) 005 87 627 01 Fine dust filter F5 (10 pieces) 005 87 358 60 Filtering ash F7 for large T0058735835
005 87 358 85 Fine dust filter F7 (10 pieces) Compact filter quantities of dust
005 87 358 83 Compact filter Consists of: HEPA filter H12, 005 87 359 24 Filtering fine dust for sticky of
Spare filter for WFE2S:
Consists of: HEPA filter H13,
Finewide
dustband gas filter
filter F5 (10 pieces) arrears (e.g. large quantities of
T0058735884
wide band gas filter (50 % active (10 % active carbonate foam) liquid flux)
Fine dust filter F7 (10 pieces) T0058735885
carbon, 50 % Puratex)
Compact filter T0058735883
005 87 358 95 Option: Adhesive fume filter
Consists of: HEPA filter H13, wide band gas filter (50% active carbon, 50% Puratex)
(50 % active carbon, 50 %
1 Puratex)
Option: Adhesive fume filter (50% active carbon, 50% Puratex)
T0058735895

Spare filter for WFE2ES:

Fine dust filter F5 (10 pieces) 17 T0058762701
Compact filter Consists of: HEPA filter H12, wide band gas filter (10% active
carbonate foam)

Spare filter WFE2S/WFE4S:

Filtering ash F7 for large quantities of dust T0058735860
Filtering fine dust for sticky of arrears (e.g. large quantities of liquid flux) T0058735924

Note: Some of the above items may require a freight lead time. Product depictions are not to scale. Broken shelf packs attract a 5% Surcharge. Prices herein do not include GST. 49