Cisco ISR4431/K9 Datasheet

CISCO ISR 4000 SERIES ROUTER DATASHEET

ROUTER-SWITCH.COM
ROUTER SWITCH LIMITED | HONG KONG
0
Content
Overview ................................................................................................................................................................................ 2

Quick Specs.................................................................................................................................................................... 2

Product Details.............................................................................................................................................................. 4

The Modules, Cards, Licenses & Accessories .................................................................................................... 9

Compare to Similar Items ...................................................................................................................................... 11

Specification....................................................................................................................................................................... 13

Cisco ISR4431/K9 Specification..................................................................................................................... 13

FAQ ....................................................................................................................................................................................... 16

Source .................................................................................................................................................................................. 19

Contact Us

Tel: +1-626-239-8066 (USA) +852-3050-1066 / +852-3174-6166 / +852-9795-4940 (Hong Kong)

Fax: +852-3050-1066 (Hong Kong)

Email: cisco@router-switch.com (Sales Inquiries)

ccie-support@router-switch.com (CCIE Technical Support)

1
Overview

Cisco 4431 Integrated Services Router, which supports 3 Network Interface Modules (NIM) slots,

delivers 500 Mbps to 1 Gbps aggregate throughput. This router also support two kinds of DDRM,

data plane and control/services plane, which make administrator easy to manage the router.

Quick Specs

Figure 1 shows the appearance of Cisco ISR4431/K9.

2
Table 1 shows the Quick Specs.

Product Code Cisco ISR4431/K9

Aggregate Throughput 500 Mbps to 1 Gbps

Total onboard WAN or LAN 10/100/1000 ports 4

RJ-45-based ports 4

SFP-based ports 4

NIM (Network Interface Modules) slots 3

Onboard ISC slot 1

DDRM (data plane) 2 GB (default) / 2 GB (maximum)

DDRM (control/services plane) 4 GB (default) / 16 GB (maximum)

Flash Memory 8 GB (default) / 32 GB (maximum)

Power-supply options Internal: AC, DC, and PoE

Rack height 1 RU

Dimensions (H x W x D) 43.9 x 438.15 x 507.2 mm

Package Weight 20.88 Kg

3
Product Details

Figure 2 shows the LEDs on the front panel of the Cisco ISR4431/K9.

Note:

Power supply unit Router power On/Off switch

LEDs Optional power supply unit

LEDs include 12 indicators.

4
Table 2 shows the LED descriptions.

LEDs Represents Color Description

PSU Power Supply Unit (P0 Green PSU is on and is providing power.

and P1) Status Amber PSU is on but with errors or in a failure condition.

Off Power supply is turned off.

GE POE Internal PoE Daughter Green PSU is installed and providing power

Card Status Amber PSU is installed but in a failure condition.

Off PSU is off.

FLASH System Flash Status Blinking Compact flash/eUSB flash is present and

Green currently being accessed.

TEMP Temperature Status Solid All temperature sensors in the system are within

green acceptable range.

Amber One or more temperature sensors in the system

are outside the acceptable range.

Off Temperature is not being monitored.

PWR System Power Green System power is on and functioning correctly.

5
LEDs Represents Color Description

Green System power is in the process of shutting down.

blinking

Amber System power is up, but low level initialization

failed.

Amber System power is up, but the system failed to

blinking come out of reset.

Off System power is off.

POE Power Over Ethernet Green Two PoE power supplies are installed and

BOOST Boost Mode operating in boost mode.

Off This can mean one of the following:

No PoE PSU installed.

One PoE PSU installed.

Two PoE PSUs installed and operating in

redundant mode.

ISC ISC Slot Status Green PVDM4 is present and enabled.

Amber Initialized with error.

6
LEDs Represents Color Description

Off Not present.

FAN Fan Status Green All fans are operating.

Amber One fan has stopped working.

Blinking Two or more fans have stopped working, or the

Amber fan tray has been removed.

Off Fans are not being monitored.

STAT System Status Solid System operating normally.

green

Blinking BIOS/Rommon is booting.

amber

Amber BIOS/Rommon has completed booting, and

system is at Rommon prompt or booting

platform software.

Off System is not out of reset or BIOS image is not

loadable.

7
Figure 3 shows the back panel of Cisco ISR4431/K9.

Note:

GE management port Console port

Auxiliary port GE Ports

USB Type A port NIM Slots

USB Type B mini port

The NIMs support 2 single-wide or 1 double-wide.

The GE Ports include 4 RJ45 ports and 4 SFP ports.

8
The Modules, Cards, Licenses & Accessories

Cisco ISR4431/K9 is one of the Cisco 4000 series routers, which support new modules & cards

slots, such as NIM, ISC, etc. Besides, Cisco ISR4321/K9 can upgrade by licenses.

Table 3 shows some recommended modules, cards, licenses and several cables.

Items Models Descriptions

Cisco CAB-SS-449FC RS-449 Cable, DCE Female to

CAB-SS-449FC
Smart Serial, 10 Feet
Smart Serial Cables
Cisco CAB-SS-V35FC V.35 Cable, DCE Female to
CAB-SS-V35FC
Smart Serial, 10 Feet

Cisco CAB-AUX-RJ45 Auxiliary Cable 8ft with RJ45

CAB-AUX-RJ45
and DB25M

CAB-ETH-S-RJ45 Cisco Router Cable CAB-ETH-S-RJ45

Console and
Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with
Auxillary Cables CAB-CONSOLE-RJ45
RJ45 and DB9F

Cisco CAB-CONSOLE-USB Console Cable 6 ft with

CAB-CONSOLE-USB
USB Type A and mini-B

9
Items Models Descriptions

Cisco ISR 4431/4451 AppX license L-SL-44-APP-

Licenses L-SL-44-APP-K9=
K9= with WAAS/vWAAS 1300/2500 conns RTU

Cisco Fourth-Generation Multiflex Trunk Voice and

NIM-1MFT-T1/E1
WAN network interface module

Cisco Multiflex Trunk Voice and WAN network

NIM-2CE1T1-PRI
interface module

Analog voice network interface card (ear and

NIM-4E/M
Network Interface mouth)

Modules Cisco Analog voice network interface card NIM-

NIM-2FXS
2FXS

Cisco Analog voice network interface card NIM-

NIM-2FXS/4FXO
2FXS/4FXO

Cisco Fourth-Generation Multiflex Trunk Voice and

NIM-8MFT-T1/E1
WAN network interface module

SFPs for On-Board Cisco GLC-LH-SMD 1000BASE-LX/LH SFP

GLC-SX-MMD
GE Ports transceiver module, MMF/SMF, 1310nm, DOM

10
Items Models Descriptions

Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver

GLC-LH-SMD
module, SMF, 1550nm, DOM

Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver

GLC-ZX-SMD
module, MMF, 850nm, DOM

Compare to Similar Items

Models ISR4451-X/K9 ISR4431/K9 ISR4351/K9 ISR4331/K9 ISR4321/K9

Aggregate 1 Gbps to 2 500 Mbps to 1 200 Mbps to 100 Mbps to 50 Mbps

Throughput Gbps Gbps 400 Mbps 300 Mbps to 100 Mbps

Total onboard 4 4 3 3 2

WAN or

LAN

10/100/1000

ports

RJ-45-based 4 4 3 2 2

ports

11
Models ISR4451-X/K9 ISR4431/K9 ISR4351/K9 ISR4331/K9 ISR4321/K9

SFP-based 4 4 3 2 1

ports

Enhanced 2 0 2 1 0

service-

module slots

NIM slots 3 3 3 2 2

Onboard ISC 1 1 1 1 1

slot

Rack height 2 1 2 1 1

12
Specification

Cisco ISR4431/K9 Specification

Aggregate Throughput 500Mbps to 1Gbps

Total onboard WAN or LAN 10/100/1000 ports 4

RJ-45-based ports 4

SFP-based ports 4

Enhanced service-module slots 0

Doublewide service-module slots 0

NIM slots 3

OIR (all I/O modules) Yes

Onboard ISC slot 1

Default memory double-data-rate 3 (DDR3) error- NA

correction-code (ECC) DRAM

(Combined control/services/data planes)

Maximum memory DDR3 ECC DRAM (Combined NA

control/services/data planes)

Default memory DDR3 ECC DRAM (data plane) 2 GB

13
 Cisco ISR4431/K9 Specification

Maximum memory DDR3 ECC DRAM (data plane) 2 GB

Default memory DDR3 ECC DRAM (control/services plane) 4 GB

Maximum memory DDR3 ECC DRAM (control/services plane) 16 GB

Default flash memory 8 GB

Maximum flash memory 32 GB

External USB 2.0 slots (type A) 2

USB console port -type B mini (up to 115.2 kbps) 1

Serial console port - RJ45 (up to 115.2 kbps) 1

Serial auxiliary port - RJ45 (up to 115.2 kbps) 1

Power-supply options Internal: AC, DC, and PoE

Redundant power supply Internal: AC, DC, and PoE

AC input voltage 100 to 240 VAC autoranging

AC input frequency 47 to 63 Hz

AC input current range, AC power supply (maximum) 3 to 1.3A

AC input surge current 60 A peak and less than 5 Arms

per half cycle

14
 Cisco ISR4431/K9 Specification

Typical power (no modules) (watts) 65

Maximum power with AC power supply (watts) 250 (no PoE)

Maximum power with PoE power supply (platform only) 500 with PoE redundant

(watts)

Maximum endpoint PoE power available from PoE power 250 W with optional redundancy

supply (watts)

15
FAQ

Q: What software are the Cisco 4000 Series ISRs capable of running?

A: The 4000 Series ISRs run Cisco IOS XE Software. The initial version will be Cisco IOS XE Software

Release 3.9.1. The 4300 and 4431 ISRs were released with Cisco IOS XE Software Release 3.13, and

the 4200 Series ISRs were released with Cisco IOS XE Software Release 16.4.1.

Q: Are the Cisco ASR 1000 Series Shared Port Adapter (SPA) cards supported on the 4000 Series

ISRs?

A: No. SPAs are not compatible with the 4000 Series ISRs.

Q: Can the NIMs or service modules available on the Cisco 4000 Series work on the Cisco ASR

1000 Series?

A: The service modules will work with the Cisco ASR 1000 Series. Select NIMs will also work with

the ASR 1000 Series.

Q: Can I use the enhanced high-speed WAN interface cards (EHWICs) available on the Cisco 1900,

2900, and 3900 Series ISRs on the Cisco 4000 Series ISRs?

16
A: EHWIC modules available on the Cisco ISR Generation 2 (ISR G2) routers will not work with the

4000 Series ISRs. The 4000 Series is targeted at new branch-office environments requiring high

bandwidth and greater application performance, making most EHWICs unapplicable. Also, the

newer NIM architecture allows for faster, more capable modules on a high-end platform.

Q: What memory upgrade options are available on the Cisco 4000 Series?

A: The 4000 Series has separate data and control-plane memory. The control-plane memory

comes with 4 GB as the default, and is upgradable up to 16 GB based on various platforms. The

data-plane memory comes with 2 GB as the default and is not currently upgradable.

Q: How many dual inline memory modules (DIMMs) does the Cisco ISR4431/K9 have?

A: The Cisco ISR4431/K9 has three DIMM slots.

Q: In the case of control-plane memory, can I put a 4-GB DIMM in one slot and a 2-GB DIMM in

the other slot?

A: No. Like the Cisco 3900 Series, the 4000 Series expects both DIMM slots to have the same size

of memory; as an example, it must have either 4-GB memory in both slots for a total of 8 GB of

control-plane memory, or 2-GB memory in both slots, for a total of 4 GB of control-plane

17
memory. This setup is necessary because these platforms interleave memory devices for faster

access.

Q: Do all four ports with both RJ-45 and Small Form-Factor Pluggable (SFP) front panel Gigabit

Ethernet (FPGE) connections support failover?

A: Yes. You can configure auto-failover on any of the front-panel ports with both RJ-45 and SFP

connections. When auto-failover is configured, if the primary interface type fails, either RJ-45 or

SFP, the other media type becomes active and allows traffic to continue over the backup physical

connection. In this scenario, the backup connection needs to be connected with the same speed

and duplex as the primary connection. Note that the auto-failover feature as described does

support one Gigabit Ethernet interface acting as a backup to another. The two physical

connections available on a single Gigabit Ethernet interface simply provide failover if a link fails.

Q: Is MDI crossover (MDI-X) supported on the four onboard RJ-45 Ethernet interfaces?

A: Yes.

Q: What power cables work with the Cisco 4000 Series?

18
A: All power-supply options for the 4000 Series use a standard IEC C13 connector. No special IEC

C15 cord is necessary for the Power over Ethernet (PoE) power supply because higher-efficiency

power supplies (85 percent) are used in the 4000 Series. This cord thus helps lower the maximum

current the power supplies can draw.

Source

http://www.router-switch.com/cisco-isr4431-k9-p-5751.html

19