Hot-dip galvanized steel strip

Range of supply

voestalpine Steel Division

www.voestalpine.com/steel
Dimensions

Available dimensions: non-slit (coil)

Thickness Width Outer diameter Inner diameter

Product variant
[mm] max. [mm] max. [mm] [mm]
Zinc coating 0.45 - 4.00 1730 2000 600
Zinc-iron coating 0.45 - 2.30 1730 2000 600
corrender
0.45 - 2.30 1730 2000 600
Zinc-magnesium coating

Available dimensions: slit (slit strip)

Thickness Strip width Outer diameter Inner diameter

Product variant
[mm] [mm] [mm] [mm]
Zinc coating 0.45 - 4.00 10 - 1730 700 - 2200 500 / 600
Zinc-iron coating 0.45 - 2.30 10 - 1730 700 - 2200 500 / 600
corrender
0.45 - 2.30 10 - 1730 700 - 2200 500 / 600
Zinc-magnesium coating

Available dimensions: cut-to-length (sheet)

Thickness Width Length Package weight

Product variant
[mm] max. [mm] [mm] max. [t]
Zinc coating 0.45 - 4.00 210 - 1730 200 - 6700 6
Zinc-iron coating 0.45 - 2.30 210 - 1730 200 - 6700 6
corrender
0.45 - 2.30 210 - 1730 200 - 6700 6
Zinc-magnesium coating

Availability of width, thickness and zinc coating combinations varies depending on steel grade.
Indicated figures are reference values. Certain limitations possible depending on thickness.
Availability of some dimensions is limited depending on the location.
 Surfaces
and services

Surfaces according to EN 10346 and VDA 239-100

Norms and Normal Improved Best

Product variant Coatings
specifications surface surface surface
EN 10346 Z70 - Z600 NA, MA MB MC
Zinc coating
VDA 239-100 GI40 - GI115 - U E
EN 10346 ZF80 - ZF120 RA RB RC
Zinc-iron coating
VDA 239-100 GA40 - GA50 - U E
corrender EN 10346 ZM70 - ZM350 NA, MA MB MC
Zinc-magnesium coating VDA 239-100 ZM30 - ZM50 - U E

texplus®: Exposed with reduced waviness additionally available.

Subsequent surface treatment

Chemically dryform magicform

Forming aid
Product variant Oiled passivated Dry forming Anti-finger-
and oiled
(and oiled) aid print
Zinc coating X X (X) X X X
Zinc-iron coating X X (X) X - -
corrender
X X (X) - X X
Zinc-magnesium coating

Selected services

Inner coil Roughness Reduced Material testing

Special coil
diameter of deviation dimensional according to
labeling
500 mm from standard tolerance EN 10204

Information and product properties provided in this publication have the sole purpose of giving non-binding technical guidance and by no means replace individual expert advice
from our sales and customer service team. Information and product properties provided in this brochure shall not be deemed guaranteed characteristics unless this has been
agreed upon individually. Technical changes reserved, errors and misprints excepted. No part of this publication may be reprinted without explicit written permission by the
companies in the voestalpine Steel Division.
 Yield Tensile Total
strength strength elong. r value n value BH2
Norms and Test Rp0.2 Rm A80 min. min. min. min.
Steel grade specifications dir. [MPa] [MPa] [%] [-] [-] [MPa] Exposed

Mild steels
EN 10346 Rp0.2 Rm A80 r90 n10-20/Ag BH2
and voestalpine special grade
DX51D EN 10346 Trans. - 270 - 500 22 - - - -
DX52D EN 10346 Trans. 140 - 300 270 - 420 26 - - - -
DX53D EN 10346 Trans. 140 - 260 270 - 380 30 - - - X
DX54D EN 10346 Trans. 120 - 220 260 - 350 36 1.6 0.18 - X
DX56D EN 10346 Trans. 120 - 180 260 - 350 39 1.9 0.21 - X
DX57D EN 10346 Trans. 120 - 170 260 - 350 41 2.1 0.22 - X
DX58D voestalpine Trans. 110 - 170 250 - 330 43 2.3 0.23 - X

VDA 239-100 Rp0.2 Rm A80 r90 n10-20/Ag BH2

and voestalpine special grade
CR1 VDA 239-100 Trans. 140 - 300 270 - 410 28 - - - -
CR2 VDA 239-100 Trans. 140 - 240 270 - 370 34 1.3 0.16 - X
CR3 VDA 239-100 Trans. 140 - 210 270 - 350 38 1.8 0.18 - X
CR4 VDA 239-100 Trans. 140 - 180 270 - 330 39 1.9 0.20 - X
CR5 VDA 239-100 Trans. 110 - 170 260 - 330 41 2.1 0.22 - X
CR6 voestalpine Trans. 110 - 170 250 - 330 43 2.3 0.23 - X

Micro-alloyed steels

EN 10346 Rp0.2 Rm A80 r90 n10-20/Ag BH2

HX260LAD EN 10346 Trans. 260 - 330 350 - 430 26 - - - -

HX300LAD EN 10346 Trans. 300 - 380 380 - 480 23 - - - -
HX340LAD EN 10346 Trans. 340 - 420 410 - 510 21 - - - -
HX380LAD EN 10346 Trans. 380 - 480 440 - 560 19 - - - -
HX420LAD EN 10346 Trans. 420 - 520 470 - 590 17 - - - -
HX460LAD EN 10346 Trans. 460 - 560 500 - 640 15 - - - -
HX500LAD EN 10346 Trans. 500 - 620 530 - 690 13 - - - -

VDA 239-100 Rp0.2 Rm A80 r0 n10-20/Ag BH2

CR210LA VDA 239-100 Long. 210 - 300 310 - 410 29 1.0 0.15 - -
CR240LA VDA 239-100 Long. 240 - 320 320 - 430 27 - 0.15 - -
CR270LA VDA 239-100 Long. 270 - 350 350 - 460 25 - 0.14 - -
CR300LA VDA 239-100 Long. 300 - 380 380 - 490 23 - 0.14 - -
CR340LA VDA 239-100 Long. 340 - 430 410 - 530 21 - 0.12 - -
CR380LA VDA 239-100 Long. 380 - 470 450 - 570 19 - 0.12 - -
CR420LA VDA 239-100 Long. 420 - 520 480 - 600 17 - 0.11 - -
CR460LA VDA 239-100 Long. 460 - 580 520 - 680 15 - 0.10 - -
 Yield Tensile Total
strength strength elong. r value n value BH2
Norms and Test Rp0.2 Rm A80 min. min. min. min.
Steel grade specifications dir. [MPa] [MPa] [%] [-] [-] [MPa] Exposed

Bake-hardening steels

EN 10346 Rp0.2 Rm A80 r90 n10-20/Ag BH2

HX180BD EN 10346 Trans. 180 - 240 290 - 360 34 1.5 0.16 30 X

HX220BD EN 10346 Trans. 220 - 280 320 - 400 32 1.2 0.15 30 X
HX260BD EN 10346 Trans. 260 - 320 360 - 440 28 - - 30 X
HX300BD EN 10346 Trans. 300 - 360 400 - 480 26 - - 30 X

VDA 239-100 Rp0.2 Rm A80 r0 n10-20/Ag BH2

CR180BH VDA 239-100 Long. 180 - 240 290 - 370 34 1.1 0.17 30 X
CR210BH VDA 239-100 Long. 210 - 270 320 - 400 32 1.1 0.16 30 X
CR240BH VDA 239-100 Long. 240 - 300 340 - 440 29 1.0 0.15 30 X
CR270BH VDA 239-100 Long. 270 - 330 360 - 460 27 - 0.13 30 X

High-strength IF steels

EN 10346 Rp0.2 Rm A80 r90 n10-20/Ag BH2

HX180YD EN 10346 Trans. 180 - 240 330 - 390 34 1.7 0.18 - X

HX220YD EN 10346 Trans. 220 - 280 340 - 420 32 1.5 0.17 - X
HX260YD EN 10346 Trans. 260 - 320 380 - 440 30 1.4 0.16 - X

VDA 239-100 Rp0.2 Rm A80 r0 n10-20/Ag BH2

CR180IF VDA 239-100 Long. 180 - 240 320 - 400 35 1.2 0.19 - X
CR210IF VDA 239-100 Long. 210 - 270 340 - 420 33 1.1 0.18 - X
CR240IF VDA 239-100 Long. 240 - 300 360 - 440 31 1.0 0.17 - X

Structural steels

EN 10346 Rp0.2 Rm A80 r0 n10-20/Ag BH2

S220GD EN 10346 Long. ≥ 220 ≥ 300 20 - - - -

S250GD EN 10346 Long. ≥ 250 ≥ 330 19 - - - -
S280GD EN 10346 Long. ≥ 280 ≥ 360 18 - - - -
S320GD EN 10346 Long. ≥ 320 ≥ 390 17 - - - -
S350GD EN 10346 Long. ≥ 350 ≥ 420 16 - - - -
S390GD EN 10346 Long. ≥ 390 ≥ 460 16 - - - -
S420GD EN 10346 Long. ≥ 420 ≥ 480 15 - - - -
S450GD EN 10346 Long. ≥ 450 ≥ 510 14 - - - -
 Yield Tensile Total
strength strength elong. r value n value BH2
Norms and Test Rp0.2 Rm A80 min. min. min. min.
Steel grade specifications dir. [MPa] [MPa] [%] [-] [-] [MPa] Exposed

Carbon-manganese steels

Special voestalpine grade Rp0.2 Rm A80 r90 n10-20/Ag BH2

HT440CMD voestalpine Trans. 280 - 380 ≥ 440 25 - - - -

Dual-phase steels

EN 10346 Rp0.2 Rm A80 r0 n10-UE BH2

HCT450X EN 10346 Long. 260 - 340 ≥ 450 27 - 0.16 30 X

HCT490X EN 10346 Long. 290 - 380 ≥ 490 24 - 0.15 30 X
HCT590X EN 10346 Long. 330 - 430 ≥ 590 20 - 0.14 30 X
HCT780X EN 10346 Long. 440 - 550 ≥ 780 14 - - 30 -
HCT980X EN 10346 Long. 590 - 740 ≥ 980 10 - - 30 -

VDA 239-100 Rp0.2 Rm A80 r0 n10-20/Ag BH2

and voestalpine special grade
CR260Y450T-DP voestalpine Long. 260 - 340 450 - 560 27 - 0.16 30 X
CR290Y490T-DP VDA 239-100 Long. 290 - 380 490 - 600 24 - 0.15 30 X
CR330Y590T-DP VDA 239-100 Long. 330 - 430 590 - 700 20 - 0.14 30 X
CR360Y600T-DP voestalpine Long. 360 - 460 600 - 710 19 - 0.14 30 X
CR440Y780T-DP VDA 239-100 Long. 440 - 550 780 - 900 14 - 0.11 30 -
CR500Y780T-DP voestalpine Long. 500 - 620 780 - 900 13 - - 30 -
CR550Y980T-DP voestalpine Long. 550 - 730 980 - 1130 10 - - 30 -
CR590Y980T-DP VDA 239-100 Long. 590 - 740 980 - 1130 10 - - 30 -
CR660Y980T-DP voestalpine Trans. 660 - 810 980 - 1130 10 - - 30 -
CR700Y980T-DP VDA 239-100 Long. 700 - 850 980 - 1130 8 - - 30 -

Dual-phase high-ductility steels (cold rolled dual-phase steels with improved formability)
VDA 239-100
Rp0.2 Rm A80 r0 n10-20/Ag BH2
and voestalpine special grade
CR330Y590T-DH voestalpine Long. 330 - 430 590 - 700 26 - 0.16 30 -
CR440Y780T-DH VDA 239-100 Long. 440 - 550 780 - 900 18 - 0.13 30 -

Complex-phase steels

EN 10346 Rp0.2 Rm A80 r0 n10-UE BH2

HCT780C EN 10346 Long. 570 - 720 ≥ 780 10 - - 30 -

HCT980C EN 10346 Long. 780 - 950 ≥ 980 6 - - 30 -

VDA 239-100 Rp0.2 Rm A80 r0 n10-20/Ag BH2

and voestalpine special grade
CR570Y780T-CP VDA 239-100 Long. 570 - 720 780 - 920 10 - - 30 -
CR660Y780T-CP voestalpine Long. 660 - 830 780 - 980 10 - - 30 -
CR780Y980T-CP VDA 239-100 Long. 780 - 950 980 - 1140 6 - - 30 -
 Yield Tensile Total
strength strength elong. r value n value BH2
Norms and Test Rp0.2 Rm A80 min. min. min. min.
Steel grade specifications dir. [MPa] [MPa] [%] [-] [-] [MPa] Exposed

TRIP steels
EN 10346
Rp0.2 Rm A80 r0 n10-UE BH2
and voestalpine special grade
HCT600T voestalpine Long. 400 - 520 ≥ 600 25 - - 40 -
HCT690T EN 10346 Long. 400 - 520 ≥ 690 23 - 0.19 40 -
HCT780T EN 10346 Long. 450 - 570 ≥ 780 21 - 0.16 40 -

VDA 239-100 Rp0.2 Rm A80 r0 n10-20/Ag BH2

and voestalpine special grade
CR400Y600T-TR voestalpine Long. 400 - 520 ≥ 600 25 - - 40 -
CR400Y690T-TR VDA 239-100 Long. 400 - 520 690 - 800 24 - 0.19 40 -
CR450Y780T-TR VDA 239-100 Long. 450 - 570 780 - 910 21 - 0.16 40 -

Press-hardening steels

Special voestalpine grade Rp0.2 Rm A80 r90 n10-20/Ag BH2

phs-ultraform 1500 hardened* Trans. 950 - 1250 1300 - 1600 5 - - - -
phs-ultraform 1500 unhardened Trans. 380 - 480 ≥ 480 18 - - - -
phs-ultraform 490 hardened* Trans. 340 - 470 460 - 700 12 - - - -
phs-ultraform 490 unhardened Trans. 340 - 420 410 - 510 21 - - - -

Hot-rolled low-alloyed or micro-alloyed steels

VDA 239-100 Rp0.2 Rm A80 r0 n10-20/Ag BH2

HR380LA VDA 239-100 Long. 380 - 480 450 - 570 20 - - - -
HR420LA VDA 239-100 Long. 420 - 520 480 - 600 19 - - - -
HR460LA VDA 239-100 Long. 460 - 560 520 - 640 17 - - - -
HR500LA VDA 239-100 Long. 500 - 620 560 - 700 14 - - - -
HR700LA VDA 239-100 Long. 700 - 850 750 - 950 10 - - - -

Hot-rolled complex-phase steels

EN 10346 Rp0.2 Rm A80 r0 n10-20/Ag BH2

HDT760C EN 10346 Long. 660 - 830 ≥ 760 10 - - - -

VDA 239-100 Rp0.2 Rm A80 r0 n10-20/Ag BH2

HR660Y760T-CP VDA 239-100 Long. 660 - 820 760 - 960 10 - - 30 -

Hot-rolled ferritic-bainitic steels

EN 10346 Rp0.2 Rm A80 r0 n10-20/Ag BH2

HDT580F EN10346 Long. 460 - 620 ≥ 580 15 - - - -

VDA 239-100
Rp0.2 Rm A80 r0 n10-20/Ag BH2
and voestalpine special grade
HR440Y560T-FB voestalpine Long. 440 - 600 560 - 680 15 - - - -
HR440Y580T-FB VDA 239-100 Long. 440 - 600 580 - 700 15 - - 30 -

*Mechanical parameters and coating properties in hardened condition are standard values achieved in professional processing of flat sheets.
The indicated values are not guaranteed by voestalpine Stahl GmbH
02/17

If you’re reading this, your

successful future has already begun.

Together with us, you are always one step ahead because we offer more
than optimized products made of high-quality material.

If you are looking for customized solutions, we will be pleased to work

with you on the creation of new products and services.

If you are looking for new ideas on materials, technologies and services,
we want to help you find them.

If you are looking for a fair and reliable partner, you are at the right
place. We know that we can only be successful together with our
customers when they benefit as much as we do from our partnership.

Our customers take advantage of the most widely used technology:

Two thirds of the steel produced worldwide is made using the LD process,
and we‘re rather proud of that.

voestalpine Steel Division

voestalpine-Straße 3
4020 Linz, Austria
T. +43/50304/15-8018
produktmanagement@voestalpine.com
www.voestalpine.com/steel