Scribd
Upload
178 views1 page

Chlorine 3000 WTW

This document describes a chlorine analyzer that uses the DPD method to measure free or total chlorine levels in water. It has a 4-20 mA recorder output, two alarm relays, and measures chlorine concentrations between 0-10 mg/l with accuracies of ±5% or ±10% depending on the measurement range. The analyzer requires reagent kit replacement once per month and can operate at flow rates of 12-24 l/h and pressures from 0.34 to 10.3 bar.

Uploaded by

leonardo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
178 views1 page

Chlorine 3000 WTW

This document describes a chlorine analyzer that uses the DPD method to measure free or total chlorine levels in water. It has a 4-20 mA recorder output, two alarm relays, and measures chlorine concentrations between 0-10 mg/l with accuracies of ±5% or ±10% depending on the measurement range. The analyzer requires reagent kit replacement once per month and can operate at flow rates of 12-24 l/h and pressures from 0.34 to 10.3 bar.

Uploaded by

leonardo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Flow through chlorine analyzer

Measurement according to DPD method

4-20 mA recorder output - RS485 (bidireccional)

2 alarm relay

Measuring free or total chlorine

Measuring range 0 – 10 mg/l 0 - 6,00 mg/l ±5% of measured value 6,01 – 10,00 mg/l
±10% of measured value

Consumption of reagents: 1 kit / month

Integrated pressure reducer 0,34…10,3 bar

Flow rate 12 – 24 l/h

La Capellania 1420. Lo Barnechea. Chile * Fonofax (562)217 0003 * www.hidrochile.cl

You might also like