1 Calipers Jobs nearby Silvassa

As a Quality Controller at RR Kabel Ltd, Silvassa Manufacturing Plant, your role will involve monitoring, inspecting, and testing the production processes and finished products to ensure they meet RR Kabel's quality standards, customer requirements, and applicable industry regulations. You will work closely with production, R&D, and quality assurance teams to maintain consistent product excellence. - Conduct in-process and final inspections of raw materials, semi-finished, and finished products (wires, cables, etc.). - Ensure compliance with ISO, BIS, and other regulatory standards applicable to cable manufacturing. - Maintain and update inspection records, test reports, and quality documentation. - Operate and calibrate quality control equipment such as tensile testers, spark testers, insulation resistance meters, etc. - Identify and report non-conformities in products or processes; follow up with corrective and preventive actions (CAPA). - Support root cause analysis and continuous improvement initiatives in coordination with QA and Production teams. - Conduct periodic audits of shop-floor processes to ensure adherence to SOPs and work instructions. - Provide feedback to production staff on quality issues and suggest improvements. - Ensure proper handling and storage of test samples and records. - Assist in training workers and operators on quality standards and inspection methods. Qualifications & Experience: - Diploma / B.Tech / B.Sc in Electrical, Mechanical, Electronics, or related discipline. - 2-4 years of experience in Quality Control / QA, preferably in a cable, wire, or electrical manufacturing industry. - Knowledge of testing methods for electrical wires & cables (IS/IEC standards). - Familiarity with tools like micrometers, vernier calipers, insulation testers, HV test sets, etc. - Proficiency in MS Office and documentation practices. - Strong analytical and problem-solving skills. - Good communication and coordination abilities. Key Competencies: - Attention to detail and accuracy. - Ability to work under pressure and meet deadlines. - Strong teamwork and cross-department collaboration. - Commitment to safety and compliance standards. In this role, you will be eligible for benefits such as cell phone reimbursement, health insurance, paid sick time, paid time off, and provident fund. Relocation to Silvassa, Dadra and Nagar Haveli is preferred for this full-time, permanent position.,

Quality InspectorExperience: 2-3 Years Location: Rajkot Employment Type: Full-time   Job Summary: We are looking for a detail-oriented Quality Inspector with 2- 3 years of experience to ensure that products and processes meet established quality standards. The ideal candidate will have hands-on experience in inspection, measurement, documentation, and quality control processes. Key Responsibilities: Perform in-process and final inspection of products to ensure compliance with quality standards. Use measurement tools such as vernier calipers, micrometers, height gauges, and other instruments. Identify, record, and report non-conformities or deviations. Maintain detailed inspection records and prepare quality reports. Collaborate with production teams to resolve quality issues and prevent recurrence. Conduct root cause analysis for defects and support corrective/preventive action plans. Ensure adherence to company quality procedures and industry standards. Support continuous improvement initiatives in quality and production processes. Required Skills & Qualifications: Diploma/ITI/Bachelors degree in Mechanical Engineering or related field. 2-3 years of experience in quality inspection within manufacturing/engineering industries. Strong knowledge of inspection tools and quality standards. Ability to read and interpret technical drawings. Basic understanding of ISO standards (ISO 9001 preferred). Good analytical, documentation, and communication skills.

Manufacturing Technician Toolmaker   Must be self-motivated and able to take ownership of the appointed task to follow through to completion with little supervision. Skilled in toolroom machines like lathe, milling, drilling etc. Basic knowledge of CNC machines Ability to work in a fast-paced environment Manufacturing and assembly of Jig and fixture Work with and co-ordinate outside tooling vendors Building and testing prototypes Experience designing fixtures and hard tooling for manufacturing Excellent written and verbal communication skills Troubleshooting skills, debug experience Being able to read engineering drawings Be able to use inspection tools like calipers, micrometers, gages From a point of concept come up with a solution. Previous demonstration experience in the mechanical assembly of tools/ machinery. Thorough understanding of pneumatics, hydraulics. Manufacturing process knowledge. Knowledge of different types of threads. Knowledge of heat treatment processes. Knowledge of material selection as per application. Tool selection with respect to for above material & machines. Use & selection of tool room hand tools. Able to read mechanical drawings and build parts/assembly as per drawing. Knowledge of assembly & repair of tool/die/fixtures. Knowledge of Hardware and standard buy out item selection.  Additional skills Experience using CAD software Must have basic knowledge of proximity sensors in Tooling design and build Should have basic knowledge of Microsoft office & outlook. Education: Diploma in Mechanical/ Tool & Die making / IGTR/NTTF Experience: 8-12 Years Phulgaon, Pune General Shifts Saturday Sunday off.  

You will be responsible for setting up and operating laser marking machines according to production schedules and specifications. Your duties will include loading parts into machines, monitoring the marking process to ensure quality and accuracy, and reading and interpreting technical drawings, blueprints, and job orders. Additionally, you will perform quality checks using calipers, micrometers, and other inspection tools, and adjust machine settings and parameters to optimize output and reduce defects. Routine maintenance and cleaning of laser marking equipment will also be part of your responsibilities. Documentation of production data, maintenance logs, and quality control reports is essential, along with ensuring that safety protocols and company policies are followed at all times. - Set up and operate laser marking machines according to production schedules and specifications - Load parts into machines and monitor the marking process for quality and accuracy - Read and interpret technical drawings, blueprints, and job orders - Perform quality checks using calipers, micrometers, and other inspection tools - Adjust machine settings and parameters to optimize output and reduce defects - Conduct routine maintenance and cleaning of laser marking equipment - Document production data, maintenance logs, and quality control reports - Ensure safety protocols and company policies are followed consistently There are no additional details about the company mentioned in the job description provided.,

You will be working as a Junior Engineer at Grand Lakes, a Sheet Metal fabrication and assembly manufacturer. Your main responsibilities will include: - Reading manufacturing drawings, blueprints, and specifications. - Preparing PPAP Documentation. - Monitoring operations to ensure they meet production standards. - Recommending adjustments to the assembly or production process. - Inspecting, testing, or measuring materials. - Measuring products with calipers, gauges, or micrometers. - Operating electronic inspection equipment and software. - Accepting or rejecting finished items. - Removing all products and materials that fail to meet specifications. - Reporting inspection and test data such as weights, temperatures, grades, moisture content, and quantities inspected. Qualifications required for this role include: - Diploma in a relevant field. - 1 year of total work experience is preferred. - Proficiency in English language. In addition to a competitive salary, the company offers benefits such as: - Food provided. - Health insurance. - Provident Fund. This is a full-time, permanent position suitable for Fresher candidates. You must be immediately available and able to prepare PPAP Documentations. The work location is in Sriperumbudur, Tamil Nadu. Relocation before starting work is required. You will be working as a Junior Engineer at Grand Lakes, a Sheet Metal fabrication and assembly manufacturer. Your main responsibilities will include: - Reading manufacturing drawings, blueprints, and specifications. - Preparing PPAP Documentation. - Monitoring operations to ensure they meet production standards. - Recommending adjustments to the assembly or production process. - Inspecting, testing, or measuring materials. - Measuring products with calipers, gauges, or micrometers. - Operating electronic inspection equipment and software. - Accepting or rejecting finished items. - Removing all products and materials that fail to meet specifications. - Reporting inspection and test data such as weights, temperatures, grades, moisture content, and quantities inspected. Qualifications required for this role include: - Diploma in a relevant field. - 1 year of total work experience is preferred. - Proficiency in English language. In addition to a competitive salary, the company offers benefits such as: - Food provided. - Health insurance. - Provident Fund. This is a full-time, permanent position suitable for Fresher candidates. You must be immediately available and able to prepare PPAP Documentations. The work location is in Sriperumbudur, Tamil Nadu. Relocation before starting work is required.

As a QC Dimension Inspector/ QC Final, your role involves approving or rejecting raw materials based on quality standards and recording supplier performance. You will be responsible for selecting output samples and checking them using appropriate methods, such as measuring dimensions. Additionally, maintaining records of testing, information, and various metrics like the number of defective products per day is crucial. Your duties will also include preparing and submitting reports to the quality manager, performing regular quality evaluations on materials, managing accounts and records of previous tests and different measurements, and reporting documented inspections to the quality manager. You should be proactive in addressing quality-related issues efficiently. Key Responsibilities: - Approve or reject raw materials based on quality standards and record supplier performance - Select output samples and check them using appropriate methods (measuring dimensions) - Maintain records of testing, information, and various metrics like the number of defective products per day - Prepare and submit reports to the quality manager - Perform regular quality evaluations on materials - Manage accounts and records of previous tests and measurements - Report documented inspections to quality manager - Address quality-related issues efficiently Qualifications Required: - BE/ Diploma in Mechanical/ ITI - Fresher or maximum 2 years of experience Key Skills Required: - Proficiency in using Vernier calipers, micrometers, height gauges, Bore Gauge, Hardness Tester, etc. In addition to your responsibilities, you will enjoy the following perks and benefits: - Transportation Facility from Rajkot - Canteen Facility - Leave Encashment Please note that the salary will be based on the interview and this is a full-time job. The work location is in person.,

As an expert metrology and measurement professional, you have a great opportunity with Emerson to support the Persistent Sensing Team by managing CMM operations for ACT India business. Your responsibilities will include preparing CMM programs for component parts and assemblies, conducting inspections, collaborating with internal and external customers, creating reports, participating in problem-solving, and developing work instructions for CMM setup and operation. Additionally, you will be expected to comply with safety regulations and maintain a clean work area. Key Responsibilities: - Prepare CMM programs based on CAD data and prints - Perform first off, in-process, and PDI inspections - Interact with SQE and Suppliers on part performance and process capability - Create reports and maintain records as per quality policy - Assist in problem-solving and analysis of mis-measurement issues - Use various measuring instruments such as micrometers, calipers, and bore gauges - Develop work instructions for CMM setup and operation - Identify improvements in quality processes and reduce inspection cycle time - Ensure timely maintenance and calibration of CMM Qualifications Required: - Minimum 2-5 years of experience in CMM and Standard Room - Strong oral and written communication skills - Ability to manage job flow effectively and prioritize tasks - Good working knowledge to improve utilization of CMM and reduce breakdowns - Proficiency in planning and collaborating with cross-functional teams Preferred Qualifications: - Degree/Diploma in mechanical Engineering or related field - Proficiency in Calypso (Zeiss) Programming, Basic Knowledge of Creo, CAD files (IGES & STEP) - Excellent written and verbal communication skills - Hands-on experience in Drawing reading, GD&T, SPC, MSA In this role at Emerson, you will have the opportunity to make a difference through your work. The company offers competitive compensation and benefits programs, including comprehensive medical and insurance coverage. Emerson is committed to creating a global workplace that supports diversity, equity, and inclusion, and provides opportunities for development and growth in an inclusive environment. Emerson is a global leader in automation technology and software, helping customers in critical industries operate more sustainably and efficiently. The company celebrates diversity, embraces challenges, and offers opportunities for professionals at all career stages to contribute to impactful work. Join Emerson to be a part of a collaborative and innovative team driving positive change worldwide.,

Role Overview: You will be responsible for conducting in-process and final inspections, maintaining accurate inspection reports of components, and inspecting CNC/VMC components. Your technical expertise in Mechanical Engineering or Production Technology will be crucial in utilizing various measuring instruments like Micrometer, Dial Gauge, Tool room production, and Vernier Caliper. Key Responsibilities: - Conduct in-process and final inspections - Maintain accurate inspection reports of components individually & number wise - Inspect CNC/VMC components Qualification Required: - Strong technical expertise in Mechanical Engineering or Production Technology - Hands-on experience with measuring instruments like Micrometer, Dial Gauge, Tool room production, Vernier Caliper - Basic knowledge of Microsoft Office (Excel, Word, Outlook) - Understanding of mechanical systems and manufacturing processes Additional Details: The company offers Provident Fund as a benefit and the work location is in person.,

Location- Mumbai/ Navi MumbaiQualification- Bsc / diploma / degree for measurement of jobs with vernier caliper / tape Experience Requirements: Minimum 3 years of experience in the steel industry or a machine shop environmentHands-on experience with measurement tools and basic technical understandingMale candidates preferred We are seeking a skilled and technically sound candidate to handle measurement-related activities in our steel/machine shop operations. The ideal candidate should have strong practical knowledge of using Vernier Calipers, measuring tapes, and other basic measuring instruments to ensure accurate job dimensions and quality checks.The role involves performing routine inspections, documenting measurements, coordinating with production teams, and ensuring adherence to quality standards. Candidates with a solid background in steel fabrication, machining, or related industries and a minimum of three years of relevant experience will be given preference.

Machine operators install, maintain, and operate machinery. They must have a strong understanding of the machines they work with. In-depth training may be required in order to prepare a machine operator for their daily duties. Machine operators may work with mechanical or computer-operated equipment. They must be technically-inclined and be able to properly utilize tools and machinery. Since problems with machinery may arise, machine operators must be able to analyze situations and find solutions.Assist in the installation, maintenance, and repair of machinery.Operate tools in order to aid in the manufacturing process.Perform periodic checks on equipment and solve problems as detected.Work with others in order to ensure that equipment is in proper working order.Observe and follow company safety rules and regulations.

Job Description: As a Machine Operator, your role involves setting up and operating CNC machines such as Router, Lathe, Milling, and Laser according to custom requirements. You will be responsible for loading raw materials, ensuring proper alignment, and running machine operations based on program settings and job orders. It will be essential for you to monitor the machine during operations to maintain accuracy and precision. Key Responsibilities: - Read and interpret technical drawings, CAD files, and CNC programs effectively. - Make minor adjustments to machine settings when necessary. - Report any programming errors or issues to the programmer or engineer promptly. Qualifications Required: - Measure finished products using tools like Vernier caliper, micrometer, gauges, etc. - Ensure all components are within tolerance and meet quality standards. - Reject or rework defective pieces with proper documentation. As part of maintenance and safety protocols, you will need to perform routine machine cleaning and basic preventive maintenance. It is crucial to report any breakdowns or unusual machine behavior promptly. You are expected to adhere to all shop-floor safety rules, PPE guidelines, and 5S practices to ensure a safe working environment. In terms of documentation and reporting, you will be responsible for maintaining daily production logs and machine usage reports. Additionally, recording quantities produced, errors, and downtime accurately is essential. Effective communication of production status to the supervisor is also part of your responsibilities. Please note that this is a full-time position with benefits including Provident Fund. The work location is in person. (Note: No additional details of the company were provided in the job description.),

As a Senior Extruder Operator - Cable at SBEE CABLES (INDIA) LIMITED, headquartered in Bangalore, you will be responsible for optimizing extrusion operations and ensuring quality control in cable manufacturing. With a focus on quality and innovation, SBEE Cables has built a reputable presence in the market since 1979. **Key Responsibilities:** - Operate and monitor cable extrusion machinery to ensure efficient production in line with quality standards. - Optimize extrusion processes for improved output, reduced waste, and enhanced product quality. - Conduct regular quality checks and adhere to quality control protocols, ensuring compliance with industry standards. - Troubleshoot and resolve extrusion equipment issues quickly to minimize production downtime. - Maintain detailed production and quality records, facilitating accurate reporting and analysis. - Collaborate with the quality control team to implement improvements in cable production methods. - Ensure adherence to safety protocols and standards in all operational activities. - Participate in continuous improvement initiatives to advance departmental and organizational goals. **Qualifications Required:** - Proven experience in optimization of extrusion processes, ensuring maximum efficiency and product quality. - In-depth knowledge of cable production techniques, contributing to high-standard product output. - Strong ability to implement and monitor quality control measures in cable manufacturing practices. - Proficiency in troubleshooting equipment malfunctions, identifying issues promptly, and implementing effective solutions. - Experienced in using precision measurement tools like micrometers and calipers to ensure product accuracy. - Knowledge of PLC (Programmable Logic Controller) operation for automation and control of manufacturing processes. - Understanding and adherence to industrial safety standards to maintain a safe working environment. - Familiarity with continuous improvement methodologies to enhance production processes and overall efficiency. As a Senior Extruder Operator - Cable at SBEE CABLES (INDIA) LIMITED, headquartered in Bangalore, you will be responsible for optimizing extrusion operations and ensuring quality control in cable manufacturing. With a focus on quality and innovation, SBEE Cables has built a reputable presence in the market since 1979. **Key Responsibilities:** - Operate and monitor cable extrusion machinery to ensure efficient production in line with quality standards. - Optimize extrusion processes for improved output, reduced waste, and enhanced product quality. - Conduct regular quality checks and adhere to quality control protocols, ensuring compliance with industry standards. - Troubleshoot and resolve extrusion equipment issues quickly to minimize production downtime. - Maintain detailed production and quality records, facilitating accurate reporting and analysis. - Collaborate with the quality control team to implement improvements in cable production methods. - Ensure adherence to safety protocols and standards in all operational activities. - Participate in continuous improvement initiatives to advance departmental and organizational goals. **Qualifications Required:** - Proven experience in optimization of extrusion processes, ensuring maximum efficiency and product quality. - In-depth knowledge of cable production techniques, contributing to high-standard product output. - Strong ability to implement and monitor quality control measures in cable manufacturing practices. - Proficiency in troubleshooting equipment malfunctions, identifying issues promptly, and implementing effective solutions. - Experienced in using precision measurement tools like micrometers and calipers to ensure product accuracy. - Knowledge of PLC (Programmable Logic Controller) operation for automation and control of manufacturing processes. - Understanding and adherence to industrial safety standards to maintain a safe working environment. - Familiarity with continuous improvement methodologies to enhance production processes and overall efficiency.

Role Overview: As a detail-oriented and proactive Quality Assurance (QA) Engineer at our company, your primary responsibility will be to ensure that all products meet internal and external quality standards before they are delivered to the customer. You will be involved in inspecting, testing, and reporting on product quality throughout the production process. Key Responsibilities: - Implement and monitor quality control systems and procedures across the production process. - Conduct in-process and final inspections of materials and finished goods. - Ensure compliance with ISO standards and company quality policies. - Maintain accurate documentation and records of quality checks and audits. - Identify quality issues, analyze root causes, and coordinate with production for corrective actions. - Assist in preparing and maintaining SOPs (Standard Operating Procedures), work instructions, and quality manuals. - Perform calibration and maintenance of inspection and testing instruments. - Support internal and external audits (e.g., ISO, customer audits) by preparing documents and participating in audit activities. - Train shop floor staff on quality standards and proper procedures. - Collaborate with R&D, production, and supply chain teams to improve product and process quality. Qualifications & Skills: - Bachelor's degree or diploma in Mechanical, Industrial, or Chemical Engineering or related field. - 1-3 years of experience in a QA/QC role in a manufacturing environment. (Freshers with strong fundamentals may also apply.) - Knowledge of quality management systems (QMS), ISO 9001 standards, and root cause analysis tools (e.g., 5 Whys, Fishbone Diagram). - Familiarity with measuring instruments such as vernier calipers, micrometers, pressure gauges, etc. - Strong analytical, documentation, and communication skills. - Proficient in MS Office (Excel, Word) and quality reporting tools. Additional Company Details: Joining our team offers you the opportunity to work in a fast-growing company with high-quality standards. You will have access to career growth and learning opportunities in quality and production excellence, all within a supportive team and professional work environment. Benefits: - Health insurance - Leave encashment - Provident Fund Schedule: - Day shift Job Types: - Full-time - Permanent - Fresher Performance Bonus: - Yearly bonus Work Location: - In person,

As a Quality Control / Quality Assurance Engineer, your role will involve assisting in various quality control activities within the automotive / manufacturing / engineering industry. Your primary responsibilities will include: - Assisting in setting up and operating CMM and PCMM machines such as Zeiss, Hexagon, etc. - Understanding 2D drawings and 3D CAD models to perform accurate part measurements. - Recording dimensional data and reporting any deviations. - Ensuring cleanliness and calibration status of machines is maintained. - Supporting the creation and debugging of measurement programs. - Collaborating with quality engineers to inspect NPD components. - Documenting measurement reports and effectively communicating results to the QA/QC team. In addition, you will also be involved in visual inspections of NPD parts for surface defects and finishing issues, calibration of measuring instruments, and maintaining calibration room standards. Your key responsibilities will include: Calibration: - Assisting in calibrating measuring instruments like micrometers, dial gauges, etc. - Recording calibration results and updating instrument history cards. - Scheduling and tracking internal and external calibration activities. - Maintaining calibration room cleanliness and instrument storage standards. - Supporting traceability with reference standards (NABL/ISO-certified). - Identifying out-of-tolerance instruments and reporting them. - Assisting in audits and verifications related to calibration status. Skills Required: - Basic understanding of GD&T (Geometric Dimensioning and Tolerancing). - Knowledge of measuring tools like vernier calipers, micrometers, height gauges, dial indicators, etc. - Willingness to learn CMM/PCMM operations (Zeiss, Hexagon, or equivalent). - Basic understanding of engineering drawings and 3D models. - Good observation and attention to detail. - Strong documentation and communication skills. - Familiarity with MS Excel and basic computer operations. Preferred Qualities: - Eagerness to learn and adapt to new technologies. - Team player with a positive attitude. - Good time management and problem-solving mindset.,

As a CNC Machine Operator at Phoenix Manufacturing, Inc ("PMI"), you will be responsible for operating, setting up, and maintaining CNC machines to produce high-quality precision parts in accordance with company standards and customer specifications. You will play a crucial role in ensuring the efficient production of punched/formed parts by utilizing your strong understanding of CNC machinery, blueprints, and quality control processes. Your key responsibilities will include: - Setting up and operating equipment according to the production schedule - Reading and interpreting blueprints, engineering plans, and hand sketches - Using measuring equipment such as dial caliper, micrometer, and tape measure proficiently - Verifying part programs and tooling set-up, checking first-piece, and obtaining approval from inspection before production run - Maintaining equipment following standard procedures, manufacturer's specifications, and requesting maintenance when needed - Documenting production and maintaining proper part count - Keeping CNC tooling sharp and organized, updating set-up sheet documentation for all CNC machines - Ensuring a clean and safe work area, adhering to all applicable safety procedures - Participating in educational opportunities to enhance job knowledge and skills - Accepting ownership for accomplishing new and different requests and working overtime based on production requirements - Performing any other duties and responsibilities as assigned To excel in this role, you must have a high school diploma or general education degree (GED) with relevant experience and/or training. Additionally, you should possess the ability to read and interpret documents, write reports, follow instructions, and communicate effectively in English. Basic mathematical skills and an understanding of material flow through the production floor are essential for this position. The physical demands of this job include exposure to wet/humid conditions, moving mechanical parts, fumes, and noise, with potential risks of electrical shock and vibration. Reasonable accommodations will be made for individuals with disabilities to perform the essential functions. Phoenix Manufacturing, Inc ("PMI") is an equal opportunity employer, and we are proud to offer this opportunity for a skilled and detail-oriented CNC Machine Operator to join our team in providing quality cooling solutions and exceptional customer service to customers across the western United States and beyond. As a CNC Machine Operator at Phoenix Manufacturing, Inc ("PMI"), you will be responsible for operating, setting up, and maintaining CNC machines to produce high-quality precision parts in accordance with company standards and customer specifications. You will play a crucial role in ensuring the efficient production of punched/formed parts by utilizing your strong understanding of CNC machinery, blueprints, and quality control processes. Your key responsibilities will include: - Setting up and operating equipment according to the production schedule - Reading and interpreting blueprints, engineering plans, and hand sketches - Using measuring equipment such as dial caliper, micrometer, and tape measure proficiently - Verifying part programs and tooling set-up, checking first-piece, and obtaining approval from inspection before production run - Maintaining equipment following standard procedures, manufacturer's specifications, and requesting maintenance when needed - Documenting production and maintaining proper part count - Keeping CNC tooling sharp and organized, updating set-up sheet documentation for all CNC machines - Ensuring a clean and safe work area, adhering to all applicable safety procedures - Participating in educational opportunities to enhance job knowledge and skills - Accepting ownership for accomplishing new and different requests and working overtime based on production requirements - Performing any other duties and responsibilities as assigned To excel in this role, you must have a high school diploma or general education degree (GED) with relevant experience and/or training. Additionally, you should possess the ability to read and interpret documents, write reports, follow instructions, and communicate effectively in English. Basic mathematical skills and an understanding of material flow through the production floor are essential for this position. The physical demands of this job include exposure to wet/humid conditions, moving mechanical parts, fumes, and noise, with potential risks of electrical shock and vibration. Reasonable accommodations will be made for individuals with disabilities to perform the essential functions. Phoenix Manufacturing, Inc ("PMI") is an equal opportunity employer, and we are proud to offer this opportunity for a skilled and detail-oriented CNC Machine Operator to join our team in providing quality cooling solutions and exceptional customer service to customers across the western United States and beyo

As a skilled Lathe Operator at our company in Thiruvanmiyur, Chennai, you will be responsible for operating lathe machines to perform machining operations such as cutting, drilling, facing, and turning, while ensuring product quality and machine safety. Key Responsibilities: - Operate and set up conventional lathe machines to produce metal components as per drawings/specifications. - Read and interpret engineering drawings, work orders, and job cards. - Measure and inspect components using micrometers, vernier calipers, and other measuring instruments. - Monitor machine operations and make necessary adjustments to maintain quality and tolerances. - Perform routine maintenance and cleaning of machines and work area. - Follow safety guidelines and standard operating procedures at all times. - Identify and report machine malfunctions or production issues to the supervisor. - Maintain daily production logs and inspection reports. Requirements: - ITI / Diploma in Mechanical / Fitter / Machinist trade preferred. - Hands-on experience operating conventional (manual) lathes. - Good knowledge of machining techniques and measuring instruments. - Ability to work independently with minimal supervision. - Physically fit and capable of standing for long hours. - Attention to detail and commitment to quality. Preferred Qualifications: - ITI/Diploma in Mechanical. - Prior experience in a toolroom or manufacturing environment. - Experience of threading, taper turning, and parting operations. - Experience of working with materials like mild steel, stainless steel, and aluminum. In addition to the job description, the company offers benefits including Life insurance and Provident Fund. The job type is full-time with rotational shifts. Experience: - Lathe operator: 2 years (Required) Location: - Thiruvanmiyur, Chennai, Tamil Nadu (Required) Work Location: - In person,

As an experienced Fabrication Fitter at SMT MACHINES INDIA LIMITED, METAL PARK RAIPUR, your role will involve fitting, assembling, and fabricating metal structures, frames, and components based on engineering drawings and fabrication standards. You will work with a dedicated production team to ensure the quality and accuracy of all fabricated parts. Key Responsibilities: - Read and interpret fabrication drawings, sketches, and technical specifications accurately. - Perform marking, cutting, grinding, drilling, and fitting of structural components with precision. - Carry out fabrication and assembly of steel structures, conveyors, supports, chutes, and tanks. - Check dimensions and tolerances using measuring instruments like vernier calipers, tape, and square. - Prepare joints for welding and provide assistance to welders during the fabrication process. - Ensure proper alignment, fit-up, and high-quality finish of all fabricated parts. - Maintain tools, equipment, and workspace in good condition for efficient operations. - Adhere to safety guidelines and uphold quality standards in all fabrication activities. Qualifications Required: - ITI / Diploma in Fitter, Fabrication, or Mechanical trade. - Minimum of 15 years of experience in fabrication fitting or structural fitting; freshers are also encouraged to apply. - Proficient in the use of fabrication tools, machines, and measurement techniques. - Ability to work accurately from technical drawings. - Strong commitment to safety practices and excellent teamwork skills. Please note - The job type is Full-time with options for Permanent, Fresher, Internship, or Contractual / Temporary roles with a contract length of 12 months. Benefits Include: - Flexible schedule - Health insurance - Leave encashment - Life insurance - Paid sick time - Paid time off Please ensure that you are comfortable with the in-person work location.,

As a CNC Setter, your role will involve setting up and preparing CNC machines such as lathe, milling, and turning machines based on job specifications and blueprints. You'll be responsible for tasks such as installing and adjusting tools, jigs, and fixtures for optimal machining, loading programs, conducting test runs, inspecting parts using precision measuring tools, and monitoring machines during operation to ensure quality output. Additionally, you will collaborate with CNC programmers and operators to enhance efficiency, maintain cleanliness and organization of the work area, perform routine maintenance on machines, and adhere to all safety procedures and company standards. Key Responsibilities: - Set up and prepare CNC machines (lathe/milling/turning) according to job specifications and blueprints. - Install and adjust tools, jigs, and fixtures for optimal machining. - Load programs into machines and conduct test runs to ensure proper setup. - Inspect parts using calipers, micrometers, and other precision measuring tools to maintain tight tolerances. - Monitor machines during operation to ensure quality and troubleshoot any issues. - Collaborate with CNC programmers and operators to optimize efficiency. - Maintain cleanliness and organization of the work area. - Perform routine maintenance on machines and report major issues. - Follow all safety procedures and company standards. Qualifications: - ITI / Diploma in Mechanical Engineering or equivalent. - 2+ years of experience as a CNC Setter. - Proficiency in reading technical drawings and using measurement tools. - Knowledge of Fanuc, Siemens, or other CNC controls. - Strong understanding of tooling, feeds, and speeds. - Good problem-solving skills and attention to detail. Preferred Skills: - Experience with multi-axis machines or CNC turning centers. - Knowledge of G-code and M-code. - Familiarity with ISO/TS quality standards. Please note that the job type for this position is full-time and the work location is in person. Additionally, the benefits include Provident Fund, and the schedule may involve day shift and rotational shift. As a CNC Setter, your role will involve setting up and preparing CNC machines such as lathe, milling, and turning machines based on job specifications and blueprints. You'll be responsible for tasks such as installing and adjusting tools, jigs, and fixtures for optimal machining, loading programs, conducting test runs, inspecting parts using precision measuring tools, and monitoring machines during operation to ensure quality output. Additionally, you will collaborate with CNC programmers and operators to enhance efficiency, maintain cleanliness and organization of the work area, perform routine maintenance on machines, and adhere to all safety procedures and company standards. Key Responsibilities: - Set up and prepare CNC machines (lathe/milling/turning) according to job specifications and blueprints. - Install and adjust tools, jigs, and fixtures for optimal machining. - Load programs into machines and conduct test runs to ensure proper setup. - Inspect parts using calipers, micrometers, and other precision measuring tools to maintain tight tolerances. - Monitor machines during operation to ensure quality and troubleshoot any issues. - Collaborate with CNC programmers and operators to optimize efficiency. - Maintain cleanliness and organization of the work area. - Perform routine maintenance on machines and report major issues. - Follow all safety procedures and company standards. Qualifications: - ITI / Diploma in Mechanical Engineering or equivalent. - 2+ years of experience as a CNC Setter. - Proficiency in reading technical drawings and using measurement tools. - Knowledge of Fanuc, Siemens, or other CNC controls. - Strong understanding of tooling, feeds, and speeds. - Good problem-solving skills and attention to detail. Preferred Skills: - Experience with multi-axis machines or CNC turning centers. - Knowledge of G-code and M-code. - Familiarity with ISO/TS quality standards. Please note that the job type for this position is full-time and the work location is in person. Additionally, the benefits include Provident Fund, and the schedule may involve day shift and rotational shift.

As a VMC Setter Operator at our company, you will be responsible for operating and setting up Vertical Machining Center (VMC) machines. Your qualifications should include ITI/Diploma/BE in Mechanical/CAD-CAM/Production Engineering. Candidates from Ahmedabad are preferred for this position. Key Responsibilities: - Operate VMC machines, particularly on Control systems like HAAS, Mitsubishi, and Fanuc - Demonstrate knowledge of Cutting Tools, Cutting Parameters, G Code, and M Code - Utilize precision measurement tools and read engineering drawings for accurate production - Prepare daily production reports and coordinate with the Quality Control team - Provide training to junior operators and ensure quality standards are met - Utilize measuring instruments such as Vernier caliper, Height gauge, Micrometer, etc. - Have a good understanding of GD&T principles and mechanical engineering concepts - Possess good mathematical skills and be detail-oriented with a result-driven approach - Communicate effectively and work well in a team environment Qualifications Required: - ITI/Diploma/BE in Mechanical/CAD-CAM/Production Engineering - 1 year of total work experience preferred - Knowledge of computer programming and CAD/CAM software - Ability to work day shifts and rotational shifts - Strong mechanical engineering skills If you are interested in this position, please apply by sending your resume to hradmin@amdindia.in or contact 6357772355. This is a full-time job with yearly bonuses. The work location is in-person. Thank you. As a VMC Setter Operator at our company, you will be responsible for operating and setting up Vertical Machining Center (VMC) machines. Your qualifications should include ITI/Diploma/BE in Mechanical/CAD-CAM/Production Engineering. Candidates from Ahmedabad are preferred for this position. Key Responsibilities: - Operate VMC machines, particularly on Control systems like HAAS, Mitsubishi, and Fanuc - Demonstrate knowledge of Cutting Tools, Cutting Parameters, G Code, and M Code - Utilize precision measurement tools and read engineering drawings for accurate production - Prepare daily production reports and coordinate with the Quality Control team - Provide training to junior operators and ensure quality standards are met - Utilize measuring instruments such as Vernier caliper, Height gauge, Micrometer, etc. - Have a good understanding of GD&T principles and mechanical engineering concepts - Possess good mathematical skills and be detail-oriented with a result-driven approach - Communicate effectively and work well in a team environment Qualifications Required: - ITI/Diploma/BE in Mechanical/CAD-CAM/Production Engineering - 1 year of total work experience preferred - Knowledge of computer programming and CAD/CAM software - Ability to work day shifts and rotational shifts - Strong mechanical engineering skills If you are interested in this position, please apply by sending your resume to hradmin@amdindia.in or contact 6357772355. This is a full-time job with yearly bonuses. The work location is in-person. Thank you.

As a Vertical Machining Center (VMC) Machine Operator, you will be responsible for the following tasks: - Operating Vertical Machining Center (VMC) machines to manufacture metal parts according to engineering drawings, blueprints, and job orders. - Interpreting engineering drawings, blueprints, and job orders to determine machine settings and specifications. - Setting up tools, jigs, and fixtures on the VMC machine for efficient production. - Safely loading and unloading parts onto the VMC machine. - Monitoring machine operations and adjusting settings to ensure proper function. - Performing basic to intermediate CNC programming as required. - Measuring and inspecting finished products using micrometers, calipers, and gauges to ensure they meet quality standards. - Maintaining the cleanliness and safety of the work area. - Conducting routine machine maintenance and troubleshooting issues when necessary. - Keeping records of production output and inspection reports. Qualifications required for this position: - 2 years of experience in manufacturing is preferred. In addition to the job responsibilities and qualifications, the company offers the following benefits: - Health insurance - Paid sick time - Paid time off - Provident Fund The work schedule for this position includes: - Day shift - Rotational shift Furthermore, employees may be eligible for a performance bonus and shift allowance based on their performance and schedule. Please note that this is a full-time position that requires in-person work at the specified location.,