49 Hardware Verification Jobs nearby Vellore

Job Title: Senior Engineer Systems Engineering (ADAS / Smart Pilot) Employment Type: Fulltime Role Summary We are seeking a Senior Engineer in Systems Engineering for the Smart Pilot ADAS system who will take responsibility for the end-to-end project lifecycle from initial concept through development, testing, and full-scale deployment. The role demands ensuring timely delivery, compliance with project scope, and adherence to technical specifications, safety standards and quality benchmarks. You will work closely with cross-functional teams to define system specifications and architecture, lead algorithm and software development, and validate system performance against regulatory and safety requirements. Key Responsibilities Define system-level specifications and architecture for ADAS/Smart Pilot features, collaborating with cross-functional teams (software, hardware, validation, vehicle integration). Lead the development of ADAS algorithms, perception/planning/control modules or system software as applicable. Plan, schedule and manage the entire project lifecycle from concept, requirement definition, design, to verification, validation, and deployment. Develop and execute test cases and validation plans; perform analysis of vehicle testing data, sensor data, system logs, and report issues; drive improvements based on test outcomes. Ensure compliance with relevant safety, regulatory, and quality standards during design, development and deployment phases. Manage vehicle network architecture and integration (e.g. CAN, Ethernet, sensor interfaces) and work with diagnostic, calibration and network tools as needed. Perform system-level risk analysis (e.g. DFMEA or equivalent), identify potential failure modes, define mitigation plans, and ensure robustness and reliability. Coordinate with stakeholders hardware, software, calibration, validation, OEMs/suppliers to ensure integration, alignment and delivery according to schedule. Prepare and maintain detailed system documentation: requirements, design specs, test plans, test reports, validation results, change logs, and compliance records. Provide leadership and mentorship (if applicable) to junior engineers; encourage best practices, code quality, verification/validation discipline and cross-functional collaboration. Required Qualifications & Skills B.E./B.Tech or M.E/M.Tech in Electronics, Electrical, Computer, Mechatronics, Automotive Engineering or related discipline. Significant experience in automotive systems engineering particularly in ADAS, driverassist systems, sensor integration or similar vehicle-level system development. Strong understanding of vehicle network architecture (CAN, Ethernet or similar), sensor interfaces (radar, lidar, camera), ECU/software integration and vehicle-level system design. Hands-on experience in software or algorithm development (C, C++, Python or relevant languages), along with system integration and validation. Strong skills in requirement analysis, system-level architecture design, test plan creation, validation & verification, and faultanalysis / riskanalysis methodologies. Good ability to work collaboratively across disciplines software, hardware, validation, vehicle integration, suppliers and coordinate complex system development tasks. Excellent documentation skills and clarity in communication (both technical and non-technical stakeholders). Analytical mindset, attention to detail, ability to manage multiple tasks and deadlines, and take ownership of deliverables end-to-end. Preferred / Additional Qualifications Prior experience in ADAS development, sensor fusion, perception/planning/control stack, or driverassist system integration and deployment. Familiarity with automotive safety standards (e.g. functional safety, ISO 26262), V-model or Vcycle development process, and compliance / certification requirements. Experience with automotive diagnostic, calibration or validation tools; test rigs or in-vehicle testing environments; data logging and analysis. Experience working with cross-functional or multi-disciplinary teams including hardware, software, validation, suppliers, and vehicle integration. What This Role Offers Full ownership of a complex, safety-critical ADAS / Smart Pilot system from concept to deployment. Work at the cutting edge of automotive technology with opportunities to influence architecture, safety, performance, and user experience. Collaboration across multiple disciplines software, hardware, system integration, validation offering rich learning and growth. Opportunity to shape and implement processes for system design, testing, validation, documentation, and compliance contributing to high-quality productionready systems. Exposure to ADAS sensors, vehicle network architecture, system-level integration, and testing in real-world automotive contexts.

Job Description : Lead Engineer - Core Vehicle Software Role Overview The Lead Engineer Core Vehicle Software is responsible for end-to-end software development for cockpit and vehicle control systems, including legacy ECUs, High-Performance Computers (HPCs), and Edge ECUs. The role involves in-house development, integration, and validation of core vehicle software components with a strong focus on product quality, delivery timelines, and compliance with automotive software standards. The candidate will collaborate closely with cross-functional teams to meet program objectives and enable seamless software deployment in vehicle programs. Key Responsibilities Software Development & Integration Lead the in-house design, development, and implementation of software for cockpit ECUs, legacy control units, HPCs, and Edge ECUs. Develop core vehicle software modules, middleware components, and system-level functionalities. Integrate software components from internal teams and suppliers while ensuring compatibility and performance. Conduct code reviews, software debugging, and performance optimization across ECU and HPC platforms. System Architecture & Requirements Management Understand system architecture, functional requirements, and vehicle-level interfaces. Decompose high-level requirements into detailed software specifications for various ECUs. Ensure traceability of requirements throughout the software development lifecycle. Quality, Compliance & Standards Ensure adherence to automotive software standards (e.g., ASPICE, ISO 26262, AUTOSAR where applicable). Implement robust validation and verification processes to assure software quality. Maintain strong alignment with internal quality processes, documentation, and release guidelines. Program Delivery & Planning Drive timely delivery of software components for vehicle programs, ensuring alignment with program timelines and milestones. Coordinate with project managers, hardware teams, testing teams, and suppliers for seamless program execution. Track progress, mitigate risks, and ensure on-time software deployment. Cross-Functional Collaboration Work closely with architecture, hardware, testing, cybersecurity, and integration teams for effective end-to-end delivery. Foster a collaborative and agile development environment across teams. Provide technical guidance to junior engineers and support knowledge sharing. Troubleshooting & Issue Resolution Analyze defects and implement timely fixes to ensure system stability and performance. Perform root-cause analysis for system-level issues on ECUs and HPCs. Support vehicle-level software validation and resolve issues identified during testing phases. Required Skills & Competencies Strong experience in embedded software development for automotive ECUs and HPC platforms. Proficiency in C/C++, Embedded C, and familiarity with Python or other scripting languages. Understanding of AUTOSAR (Classic/Adaptive), middleware development, and real-time operating systems (RTOS). Experience with software integration, debugging tools, version control, and CI/CD pipelines. Knowledge of vehicle network protocols (CAN, LIN, Ethernet, UDS). Strong understanding of automotive development standards (ASPICE, ISO 26262). Good analytical, problem-solving, and communication skills. Ability to work in fast-paced, agile, and cross-functional environments. B.E required.

As an experienced FPGA Sr. Design Engineer with strong expertise in 5G or ORAN technologies, your role will involve designing, implementing, and testing FPGA-based hardware systems along with R&D activities for proof-of-concept demonstrations. Key Responsibilities: - Implement FPGA code on target hardware and test with system components/software. - Perform RTL Design, Implementation, Testing, Integration, and delivery of FPGA-based systems. - Participate in R&D for aerospace-related design techniques. Qualification Required: - BE/B.Tech/M.E/M.Tech or equivalent. Domain Expertise: - Proficient in FPGA design flows using Xilinx tools (compilation, simulation, synthesis, debugging, optimization). - Strong knowledge of Verilog, VHDL, SystemVerilog. - Experience integrating Soft IP/Hard IP (GTX/GTH transceivers, MAC, DMA, PCIe Gen3, CPRI, JESD, FFT IP cores). - Skilled in verification environments with self-checking testbenches, BFMs, checkers, monitors, scoreboards. - Familiar with control interfaces: AMBA AXI, UART, SPI, IC, DDR, Ethernet, USB. - Hands-on experience with hardware debugging tools: oscilloscopes, signal analyzers, JTAG emulators. - Experience with Vivado/Vitis and evaluation kits. Good to Have: - Scripting skills in Perl, TCL, Python for automation. - Exposure to FPGA bring-up procedures and testing methodologies. - Knowledge of linting, STA, equivalence checking, CDC verification.,

Your Role As a Senior FPGA Design Engineer at NEC Mobile Network Excellence Center (NMEC), Chennai, you will be responsible for designing, implementing, and testing FPGA-based hardware systems for Datacom and Aerospace applications. You will work closely with cross-functional teams to integrate system components and demonstrate proof-of-concept designs in advanced technologies. In this role, you will: - Implement FPGA code on target hardware and test with system components and software. - Perform RTL design, implementation, testing, and integration of FPGA-based systems. - Deliver high-performance hardware solutions for Datacom and Aerospace applications. - Participate in R&D activities to demonstrate proof-of-concept designs for aerospace technologies. - Work with evaluation kits and hardware using Vivado/Vitis tools. - Use hardware debugging tools such as oscilloscopes, signal analyzers, and JTAG emulators. Your Profile - Bachelors or Masters degree in Engineering (BE/B.Tech/M.E/M.Tech or equivalent). - 4-6 years of experience in FPGA design and development. - Proficient in FPGA design flows using Xilinx tools including simulation, synthesis, debugging, and optimization. - Strong knowledge of Verilog, VHDL, and SystemVerilog. - Experience integrating Soft IP/Hard IP such as GTX/GTH transceivers, MAC, DMA, PCIe Gen3, CPRI, JESD, FFT. - Skilled in developing verification environments with self-checking testbenches, BFMs, checkers, monitors, and scoreboards. - Familiarity with control interfaces like AMBA AXI, UART, SPI, IC, DDR, Ethernet, and USB. - Hands-on experience with hardware bring-up and testing methodologies. - Good to have: scripting skills in Perl, TCL, or Python; experience in linting, STA, equivalence checking, and CDC verification. About Us At Capgemini Engineering, the world leader in engineering services, we bring together a global team of engineers, scientists, and architects to help the worlds most innovative companies unleash their potential. From autonomous cars to life-saving robots, our digital and software technology experts think outside the box as they provide unique R&D and engineering services across all industries. Join us for a career full of opportunities. Where you can make a difference. Where no two days are the same. Capgemini is a global business and technology transformation partner, helping organizations accelerate their dual transformation to address the evolving needs of customers and citizens. With a strong 55-year heritage and deep industry expertise, Capgemini is trusted by its clients to address the entire breadth of their business needsfrom strategy and design to operations.To achieve this, Capgemini draws on the capabilities of its 360,000 team members in more than 50 countries, all driven by the purpose of unleashing human energy through technology for an inclusive and sustainable future. It is a responsible and diverse organization with market-leading capabilities in digital, cloud, and data.,

As a staff FPGA/SoC integration engineer at Microchip Technology Inc., you will play a crucial role in integrating all custom and external IPs into the FPGA top. Your responsibilities will include owning the chip top RTL, place/route, timing closure, and other deliverables required for the production release of the FPGA. **Key Responsibilities:** - Develop flows and methodologies to enhance the integration of complex IPs into the FPGA chip-top using the digital-on-top (DoT) approach. - Create tools and scripts (RTL and custom scripts) to verify connectivity and functionality of the chip-top. - Manage chip-level floorplan activities, place and route, timing closure, and physical and electrical verification. - Coordinate activities among different groups to ensure smooth integration of various IPs into the chip top. - Generate netlists with different views for software, physical, electrical, and functional verification. - Collaborate with the packaging team to produce package files for various members of the FPGA product family. - Assist the verification team in debugging chip top level integration issues related to timing and functionality. - Present technical information effectively to small teams of engineers. - Communicate regularly with management, design, and verification teams in multiple locations to resolve issues and provide updates on chip/SoC integration and delivery. - Stay updated on new ASIC and custom tools related to chip integration. **Qualifications Required:** - Minimum of 15 years of proven silicon design experience in ASIC design flow, including RTL design, implementation, and functional validation. - Extensive knowledge of integrating complex custom and ASIC IPs at the chip-top level using the DoT methodology. - Expertise in ASIC flow and methodology. - Proficiency in System Verilog/Verilog, synthesis, STA, and place and route. - Experience with ASIC tools like Innovus, Tempus, Magillem, Verdi, or similar. - Competency in scripting, managing simulation queues, and data capture using Microsoft Office tools. - Ability to support layout, verification, timing characterization, and software model developers. - Strong analytical, oral, and written communication skills. - Self-motivated, proactive team player who can work to schedule requirements. **Beneficial Experience:** - Experience in ASIC development across various technology nodes. - Familiarity with verification methodologies such as SystemVerilog/UVM. - Knowledge in low power design. At Microchip Technology Inc., we offer a unique opportunity to be part of a diverse and innovative team that drives technological advancements. If you are ready to take on this exciting challenge and contribute to our mission of empowering innovation, we encourage you to explore the exciting career opportunities and company perks available on our careers page. Please note that Microchip Technology Inc. does not accept unsolicited agency resumes. Kindly refrain from forwarding resumes to our recruiting team or Microchip employees, as we are not liable for any fees related to unsolicited resumes.,

As a Senior SoC Design Engineer at Qualcomm India Private Limited, you will be utilizing your 10-16 years of experience in SoC design. Your responsibilities will include working with AMBA protocols such as AXI, AHB, and APB, understanding SoC clocking/reset/debug architecture, and dealing with peripherals like USB, PCIE, and SDCC. It is crucial to have expertise in memory controller designs, microprocessors, constraint development, and timing closure. Collaboration with SoC verification and validation teams for pre/post Silicon debug will be an integral part of your role. Additionally, hands-on experience in Low power SoC design, Multi Clock designs, Asynchronous interface, and proficiency in using tools like Lint, CDC, Design compiler, and Primetime for ASIC development is required. - Possess 10-16 years of experience in SoC design - Knowledge of AMBA protocols - AXI, AHB, APB - Understanding of SoC clocking/reset/debug architecture - Familiarity with peripherals like USB, PCIE, and SDCC - Experience in constraint development and timing closure - Collaborate with SoC verification and validation teams - Hands-on experience in Low power SoC design - Proficiency in Multi Clock designs, Asynchronous interface - Usage of tools in ASIC development such as Lint, CDC, Design compiler, and Primetime Qualifications Required: - Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with 6+ years of Hardware Engineering experience - Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with 5+ years of Hardware Engineering experience - PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with 4+ years of Hardware Engineering experience,

Role Overview: As the Lead Hardware Development Engineer at The EPlane Company, your ultimate challenge is to build the brain of the aircraft by creating the high-integrity Flight Control Computer (FCC) and Mission Computer from scratch. You will be driving the architecture for flight-critical computers and overseeing all aspects of their hardware and FPGA development. Your expertise in designing complex, high-reliability hardware and deep knowledge of the DO-254 certification process will be crucial for this role. Key Responsibilities: - Architect High-Integrity Computers: Define end-to-end hardware architecture, specify multicore processors, lockstep configurations, memory partitioning schemes, and redundancy management to meet safety requirements. - Lead Hardware Development: Manage external vendors or in-house design teams, serving as the primary technical authority. - Lead DO-254 Verification: Audit and verify all DO-254 artifacts and design processes to ensure certifiability. - Hands-on FPGA Development: Develop complex logic in FPGAs for critical functions like sensor interfaces, image processing pipelines, and data routing. - Perform Critical Analysis: Conduct latency and timing analysis, define memory budgets, and architectures like ECC and NVM. - Define Systems Interface: Collaborate with systems and software teams to ensure hardware design aligns with safety requirements. - Lead Verification & Validation: Develop and execute comprehensive hardware verification plans using simulation, hardware-in-the-loop testing, and formal verification methods. Qualifications Required: - Experience: 8+ years in safety-critical electronic hardware development. - Education: Bachelors or Masters in Electronics, Electrical, or Computer Engineering. - DO-254 Expertise: Practical experience in DO-254 DAL A or B certification process. - Safety-Critical Architecture: Proven experience in designing high-reliability embedded computer architectures. - RTOS & Partitioning: Knowledge of ARINC 653 principles and hardware-level implementation. - FPGA Mastery: Proficiency in VHDL or Verilog and experience with FPGA toolchains. - Systems & Software Interface: Understanding of ARP4754A systems engineering process and DO-254 / DO-178C interface. - BSP Knowledge: Understanding of hardware components required for BSP development. - Avionics & Mixed-Signal Design: Experience in standard avionics interfaces and mixed-signal design. - Best Practices: Familiarity with safety-critical hardware design best practices. (Note: Preferred qualifications and details about the company have been omitted as they are not part of the main job description provided.),

You will be responsible for the following key responsibilities: - Acquiring and demonstrating domain knowledge of OMD products. - Fully participating in the software development life cycle to establish test scenarios and automating them using KLA test automation frameworks to prove the functionality and robustness of the software created. - Interacting with multisite team members (India, Israel & China) during the software product life cycle for requirement analysis, Software Test Plan (STP) preparation, Software Test Design (STD) preparation, and Executing Tests. - Working with hardware, Systems, and Application groups to understand system requirements and map them to software testing needs. - Participating in deployment/troubleshooting at customer sites. - Reviewing software design, change specifications, and plans against and/or process requirements. Reviews include applicable specifications, materials, tools, techniques, and methodologies. Performing or co-ordinating verification of software requirement allocations, traceability, and testability. - Developing, modifying, applying, and maintaining standards for quality operating methods, processes, systems, and procedures. - Ensuring that corrective measures meet acceptable quality standards. - Creating tests to identify software problems. - Analyzing bugs and errors found during tests and documenting results of tests. - Recommending improvements in software to enhance user experience. - Working together with the software developer to enhance and improve programs. To be considered for this position, you must meet the following minimum qualifications: - BE/BS/BTech degree with 1 or more years of SW Testing experience. - Thorough knowledge of SDLC and software engineering. - Extensive experience in Automated software Testing and Manual testing. - Exceptional attention to details. - Excellent analytical and problem-solving skills. - Must be able to interact and communicate with all levels of staff and project management in both the business and the technical areas, with the ability to keep discussions at the appropriate level of abstraction. - Great team player and able to work efficiently with minimal supervision. - Willingness to travel to Israel, US, and other customer places on short assignments. - Experience in developing software or automation scripts in C# or Java (C# is preferred). - Experience in Designing and/or working experience with different kinds of Automation test frameworks (FlaUI, MS CodedUI, Appium, Selenium, etc.). - Knowledge of KLA specific or general semiconductor domain (Optional). - Experience with large software systems/tool applications is preferred. Please note that KLA offers a competitive, family-friendly total rewards package designed to reflect their commitment to an inclusive environment while ensuring they provide benefits that meet the diverse needs of their employees. KLA is proud to be an equal opportunity employer.,

Role Overview: At Mak Controls, we highly value our employees" contributions and provide them with challenges to help them reach their full potential. Our focus on fostering healthy interpersonal relationships and teamwork leads to achieving optimal results. By working on our unique range of products, individuals gain valuable experience and knowledge, propelling their careers forward in the industry. Key Responsibilities: - Lead the design activity of various high-power Battery Chargers, DC-DC Converters, Rectifiers, SMPS, OP-AMP, and Motor Drivers. - Mandatory magnetic design of converter components. - Thorough understanding of Analog circuit design, Thermal modeling of power electronic devices, heat sink design/calculation, EMI, and EMC. - Experience in Schematic design, Simulation/analysis, PCB layout guidance/verification, and Prototype testing. - Develop Electronics hardware from concept to prototype, including alternate design analysis, POC evaluations, and documentation. - Create detailed design documents considering EMI/EMC, Component Tolerance, and de-rating calculations. - Validate designs for high reliability and robustness, perform Functional and Compliance Testing. - Proficiency in using Multimeter, Oscilloscope, Network analyzer, and power supplies. Understanding of full bridge topologies and MOSFET. - Preferable: Experience in handling a team of 5 to 10 employees. Qualifications Required: - Bachelor's degree in Electrical and Electronics Engineering (BE EEE/ECE). - 8 to 10 years of experience in the field of Power Electronics. - Male candidates are preferred. Additional Company Details: Omit this section as there are no additional company details mentioned in the provided job description.,

As a Physical Design Engineer at Qualcomm India Private Limited, you will be responsible for the physical implementation activities for sub-systems, including floor-planning, place and route, clock tree synthesis (CTS), formal verification, physical verification (DRC/LVS), power delivery network (PDN), timing closure, and power optimization. Your role will involve making PPA trade-off decisions for critical cores, ensuring timing convergence of high-frequency data-path intensive cores, and implementing advanced STA concepts. You will work on block-level PnR convergence using tools like Synopsys ICC2/Cadence Innovus and timing convergence in PTSI/Tempus in the latest technology nodes. Additionally, you will need a good understanding of clocking architecture and collaborate closely with design, DFT, and PNR teams to resolve issues related to constraints validation, verification, STA, and physical design. Proficiency in Tcl/Perl scripting, strong problem-solving skills, and effective communication are essential for this role. Key Responsibilities: - Perform physical implementation activities for sub-systems, including floor-planning, place and route, CTS, formal verification, physical verification, PDN, timing closure, and power optimization - Make PPA trade-off decisions for critical cores and ensure timing convergence of high-frequency data-path intensive cores - Collaborate closely with design, DFT, and PNR teams to resolve issues related to constraints validation, verification, STA, and physical design - Utilize tools like Synopsys ICC2/Cadence Innovus for block-level PnR convergence and timing convergence in PTSI/Tempus - Demonstrate proficiency in Tcl/Perl scripting for automation and efficiency - Apply strong problem-solving skills and communicate effectively within the team Qualifications Required: - Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with 2+ years of Hardware Engineering or related work experience OR - Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with 1+ year of Hardware Engineering or related work experience OR - PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field - 3-6 years of experience in Physical Design/Implementation,

As an experienced Logic Design Engineer at Qualcomm India Private Limited, your role will involve the following key responsibilities: - Hands-on experience in Logic design, micro-architecture, and RTL coding, with a strong emphasis on SoC design and integration for complex SoCs. - Proficiency in Verilog and System-Verilog, along with a solid understanding of AMBA protocols like AXI, AHB, and APB, as well as SoC clocking, reset, debug architecture, and peripherals such as USB, PCIE, and SDCC. - Knowledge of Memory controller designs, microprocessors, and experience in constraint development and timing closure. - Collaboration with the SoC verification and validation teams for pre/post Silicon debug, along with expertise in Low power SoC design. - Familiarity with ASIC development tools such as Lint, CDC, Design compiler, and Primetime, along with hands-on experience in Synthesis and Multi Clock designs. - Understanding of timing concepts for ASIC, including creating pad ring and working with the chip-level floorplan team. Qualifications required for this role include: - Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field, with a minimum of 3 years of Hardware Engineering experience. - Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field, with at least 2 years of Hardware Engineering experience. - PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field, with a minimum of 1 year of Hardware Engineering experience. Preferred qualifications: - 2-9 years of experience in SoC design. - Educational Requirements: 2+ years of experience with a Bachelors/Masters degree in Electrical engineering.,

Role Overview: As a Hardware Engineer at Qualcomm, you will be responsible for the Logic design, micro-architecture, and RTL coding of complex SoCs. Your expertise will be crucial in ensuring the successful design and integration of SoCs, as well as collaborating with verification and validation teams for pre/post Silicon debug. Key Responsibilities: - Hands-on experience with SoC design and integration - Proficiency in Verilog/System-Verilog - Knowledge of AMBA protocols such as AXI, AHB, and APB - Understanding of SoC clocking, reset, debug architecture, and peripherals like USB, PCIE, and SDCC - Familiarity with Memory controller designs and microprocessors - Experience in constraint development and timing closure - Collaboration with SoC verification and validation teams for pre/post Silicon debug - Expertise in Low power SoC design - Competence in Synthesis and understanding of timing concepts for ASIC - Proficiency in Multi Clock designs and Asynchronous interface - Experience in creating pad ring and working with the chip level floorplan team - Utilization of tools in ASIC development such as Lint, CDC, Design compiler, and Primetime Qualifications Required: - Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with 3+ years of Hardware Engineering experience OR - Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with 2+ years of Hardware Engineering experience OR - PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with 1+ year of Hardware Engineering experience Preferred Qualifications: - 6-9 years of experience in SoC design - Educational Requirements: 6+ years of experience with a Bachelors/ Masters degree in Electrical engineering Qualcomm is dedicated to providing equal opportunities for all applicants, including individuals with disabilities. If you require accommodations during the application/hiring process, you may contact Qualcomm's disability-accommodations@qualcomm.com.,

As a Physical Design Engineer at Qualcomm India Private Limited, you will be responsible for the physical implementation activities for sub-systems, including floor-planning, place and route, clock tree synthesis, formal verification, physical verification (DRC/LVS), power delivery network, timing closure, and power optimization. You will need to have a good understanding of PD implementation of PPA critical cores and be able to make appropriate PPA trade-off decisions. Additionally, knowledge in timing convergence of high-frequency data-path intensive cores and advanced STA concepts is essential. You should also be proficient in block-level PnR convergence with tools like Synopsys ICC2/Cadence Innovus and timing convergence in PTSI/Tempus. It is crucial to have a strong grasp of clocking architecture and work closely with design, DFT, and PNR teams to resolve issues related to constraints validation, verification, STA, and physical design. Proficiency in Tcl/Perl scripting, strong problem-solving skills, and effective communication skills are also required for this role. Key Responsibilities: - Perform physical implementation activities for sub-systems, including floor-planning, place and route, CTS, formal verification, physical verification, PDN, timing closure, and power optimization - Make appropriate PPA trade-off decisions for critical cores - Ensure timing convergence of high-frequency data-path intensive cores - Collaborate with design, DFT, and PNR teams to resolve issues related to constraints validation, verification, STA, and physical design - Utilize Tcl/Perl scripting for efficient workflow - Demonstrate strong problem-solving skills and effective communication abilities Qualifications Required: - Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with 2+ years of Hardware Engineering or related work experience OR - Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with 1+ year of Hardware Engineering or related work experience OR - PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field - 1-3 years of experience in Physical Design/Implementation Please note that Qualcomm is an equal opportunity employer and is committed to providing accommodations for individuals with disabilities during the application/hiring process. If you require any assistance, you may contact disability-accommodations@qualcomm.com. Qualcomm also expects its employees to comply with all applicable policies and procedures, including those related to the protection of company confidential information. If you have any questions about this role, please reach out to Qualcomm Careers. As a Physical Design Engineer at Qualcomm India Private Limited, you will be responsible for the physical implementation activities for sub-systems, including floor-planning, place and route, clock tree synthesis, formal verification, physical verification (DRC/LVS), power delivery network, timing closure, and power optimization. You will need to have a good understanding of PD implementation of PPA critical cores and be able to make appropriate PPA trade-off decisions. Additionally, knowledge in timing convergence of high-frequency data-path intensive cores and advanced STA concepts is essential. You should also be proficient in block-level PnR convergence with tools like Synopsys ICC2/Cadence Innovus and timing convergence in PTSI/Tempus. It is crucial to have a strong grasp of clocking architecture and work closely with design, DFT, and PNR teams to resolve issues related to constraints validation, verification, STA, and physical design. Proficiency in Tcl/Perl scripting, strong problem-solving skills, and effective communication skills are also required for this role. Key Responsibilities: - Perform physical implementation activities for sub-systems, including floor-planning, place and route, CTS, formal verification, physical verification, PDN, timing closure, and power optimization - Make appropriate PPA trade-off decisions for critical cores - Ensure timing convergence of high-frequency data-path intensive cores - Collaborate with design, DFT, and PNR teams to resolve issues related to constraints validation, verification, STA, and physical design - Utilize Tcl/Perl scripting for efficient workflow - Demonstrate strong problem-solving skills and effective communication abilities Qualifications Required: - Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with 2+ years of Hardware Engineering or related work experience OR - Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with 1+ year of Hardware Engineering or related work experience OR - PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field - 1-3 years of experience in Physical Design/Implementation

As a Senior Verification Engineer at Epiroc, you will be part of a dynamic team focused on developing high-performance software applications for the mining, drilling, and construction equipment domain. Your expertise in Python programming and experience with automation frameworks like Robot Framework and Selenium will be crucial in contributing to scalable and reliable solutions that meet industry-grade standards. Key Responsibilities: - Design and develop automated test suites for functional, integration, regression, and performance testing. - Define test strategies, create detailed test plans, and manage test case repositories using tools like Jira. - Conduct system validation and verification, particularly for real-time, embedded, or industrial applications. - Perform hardware-software integration testing in domains such as mining, drilling, or construction. - Test scalable and responsive user interfaces (UI), especially in resource-constrained or embedded environments. - Troubleshoot and analyze complex issues, utilizing debugging tools and version control systems like Git. - Collaborate effectively with cross-functional teams, including developers, system engineers, and product owners. - Lead testing discussions, reviews, and defect triages while mentoring junior team members in testing best practices. - Advocate for quality and ensure adherence to testing standards. Required Skills and Qualifications: - Bachelor's or Master's degree in relevant engineering fields with 6 to 10 years of professional experience. - Proficiency in Python for developing test scripts and automation frameworks. - Experience with automation tools such as Robot Framework, Selenium, and related test libraries. - Hands-on experience with Agile methodologies, including sprint planning, standups, and retrospectives. - Knowledge of communication protocols like CAN, J1939, LIN, and Ethernet is advantageous. - Familiarity with Git, CI/CD practices, and tools within the Azure DevOps ecosystem. - Customer-facing skills with a proactive approach to deliver customized solutions. Good to Have: - Previous experience in heavy machinery in mining, construction, or automotive control systems. - Curiosity to learn, experience with Docker containers, and strong problem-solving skills. - Excellent communication, teamwork, and Agile certifications such as Scrum Master. - Positive attitude, adaptability, and ability to work in an international client environment. Location: This position is based in Bengaluru/Chennai/Hyderabad, India.,

As a Qualcomm Hardware Engineer, you will be responsible for planning, designing, optimizing, verifying, and testing electronic systems. This includes working on a wide range of components such as circuits, mechanical systems, Digital/Analog/RF/optical systems, equipment and packaging, test systems, FPGA, and/or DSP systems to launch cutting-edge, world-class products. Collaboration with cross-functional teams is crucial to developing solutions that meet performance requirements. **Key Responsibilities:** - Physical Design - RTL Design - Design Verification - STA/ Synthesis - DFT - FPGA Emulation - Validation **Qualifications Required:** - Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with at least 3 years of Hardware Engineering or related work experience. OR - Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with a minimum of 2 years of Hardware Engineering or related work experience. OR - PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with at least 1 year of Hardware Engineering or related work experience. Qualcomm India Private Limited is a leading technology innovator committed to pushing the boundaries of what's possible to enable next-generation experiences. They drive digital transformation to help create a smarter, connected future for all. Qualcomm is an equal opportunity employer dedicated to providing accessible processes for individuals with disabilities. Adherence to all applicable policies and procedures, including those related to security and confidentiality, is expected from all employees. Staffing agencies and represented individuals are not authorized to submit profiles, applications, or resumes through Qualcomm's Careers Site. For further information about available roles, please reach out to Qualcomm Careers.,

Role Overview: At Mak Controls, we value our employees and their contributions to the company. We provide challenges that help individuals realize their true potential and empower them to turn their weaknesses into strengths. Our team maintains healthy interpersonal relationships to collaborate effectively and consistently achieve optimal results. By working on our unique range of products, employees gain valuable experience and knowledge that accelerates their career growth in comparison to their peers in the industry. Key Responsibilities: - Lead the design activity of various high power Battery Chargers, DC-DC Converters, Rectifiers, SMPS, OP-AMP, and Motor Drivers. - Mandatory magnetic design of converter components. - Thorough understanding of Analog circuit design, Thermal modeling of power electronic devices, heat sink design/calculation, EMI, and EMC. - Preferable experience in Schematic design, Simulation/analysis, PCB layout guidance/verification, and Prototype testing. - Develop Electronics hardware from initial concept to prototype, including alternate design analysis, POC evaluations, and documentation. - Prepare detailed design documents considering EMI/EMC, Component Tolerance, and de-rating calculations. - Validate designs for high reliability and robustness, conduct Functional and Compliance Testing. - Proficiency in using Multimeter, Oscilloscope, Network analyzer, and power supplies, along with understanding of Full bridge topologies and MOSFET. Qualification Required: - BE/B.Tech in Electrical and Electronics Engineering (EEE/ECE) Note: If you are interested in joining our successful team and working hands-on with sophisticated and rare systems, please fill out the form and upload your resume. We will reach out if there are any suitable openings for you.,

In this role at MicroGO, a Chennai-based company dedicated to reducing infectious diseases through a One Health approach, you will be a vital part of a team that includes scientists, engineers, product application specialists, sales, and customer care professionals. **Key Responsibilities:** - Assemble, test, and maintain electronic components and systems - Design circuits and PCBs - Integrate systems - Analyze and resolve technical issues - Collaborate with cross-functional teams to develop new products **Qualifications:** - Diploma or Bachelor's Degree in Electronics Engineering or a related field - Expertise in PCB assembly, component replacement, soldering, and service - Ability to interpret and test electronic schematics and assemblies - Verification testing, troubleshooting, and debugging experience - Familiarity with oscilloscopes, power supplies, signal generators, and logic analyzers - Strong problem-solving, communication, and teamwork skills - Self-motivated, detail-oriented, and results-driven - Willingness and ability to learn new technologies and engineering solutions MicroGO is a forward-thinking company that values innovation and collaboration in the pursuit of a healthier world.,

You have the opportunity to work at Qualcomm India Private Limited in the Engineering Group, specifically in the Hardware Engineering domain. As a Hardware Engineer, your role will involve the following responsibilities: - Strong knowledge of digital design and SOC architecture - Good understanding of OOP concepts - Experience in Hardware Verification Languages (HVL) such as System Verilog, UVM/OVM & System C - Proficiency in Hardware Description Languages (HDL) such as Verilog - Knowledge of ARM/DSP CPU architecture and High Speed Peripherals like USB2/3, PCIE, or Audio/Multimedia - Familiarity with Power-aware Verification, GLS, Test vector generation - Exposure to Version managers like Clearcase/perforce - Proficiency in Scripting languages like Perl, Tcl, or Python - Analytical and Debugging skills Qualifications required for this role include: - Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with 2+ years of Hardware Engineering or related work experience OR - Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with 1+ year of Hardware Engineering or related work experience OR - PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field Experience level expected for this position is 3-6 years with Bachelors or Masters in Engineering. Qualcomm is an equal opportunity employer that is committed to providing an accessible process for individuals with disabilities. If you require an accommodation during the application/hiring process, you can reach out to Qualcomm at disability-accommodations@qualcomm.com. Additionally, Qualcomm emphasizes the importance of abiding by all applicable policies and procedures, including security measures for protecting confidential information. Please note that Qualcomm's Careers Site is intended for individuals seeking direct employment at Qualcomm. Staffing and recruiting agencies are advised not to use this site for submissions, as Qualcomm does not accept unsolicited resumes or applications from agencies. For more information about this role, you can contact Qualcomm Careers directly. You have the opportunity to work at Qualcomm India Private Limited in the Engineering Group, specifically in the Hardware Engineering domain. As a Hardware Engineer, your role will involve the following responsibilities: - Strong knowledge of digital design and SOC architecture - Good understanding of OOP concepts - Experience in Hardware Verification Languages (HVL) such as System Verilog, UVM/OVM & System C - Proficiency in Hardware Description Languages (HDL) such as Verilog - Knowledge of ARM/DSP CPU architecture and High Speed Peripherals like USB2/3, PCIE, or Audio/Multimedia - Familiarity with Power-aware Verification, GLS, Test vector generation - Exposure to Version managers like Clearcase/perforce - Proficiency in Scripting languages like Perl, Tcl, or Python - Analytical and Debugging skills Qualifications required for this role include: - Bachelor's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with 2+ years of Hardware Engineering or related work experience OR - Master's degree in Computer Science, Electrical/Electronics Engineering, Engineering, or related field with 1+ year of Hardware Engineering or related work experience OR - PhD in Computer Science, Electrical/Electronics Engineering, Engineering, or related field Experience level expected for this position is 3-6 years with Bachelors or Masters in Engineering. Qualcomm is an equal opportunity employer that is committed to providing an accessible process for individuals with disabilities. If you require an accommodation during the application/hiring process, you can reach out to Qualcomm at disability-accommodations@qualcomm.com. Additionally, Qualcomm emphasizes the importance of abiding by all applicable policies and procedures, including security measures for protecting confidential information. Please note that Qualcomm's Careers Site is intended for individuals seeking direct employment at Qualcomm. Staffing and recruiting agencies are advised not to use this site for submissions, as Qualcomm does not accept unsolicited resumes or applications from agencies. For more information about this role, you can contact Qualcomm Careers directly.

You have an exciting opportunity as a Mobile Automation Testing professional with 8+ years of experience in both manual and automation testing. Your expertise should include experience in Windows and mobile application automation, strong knowledge in STLC, and experience in Automation based on BDD. You should also have strong experience in framework development, test script design, and specifically in Appium using Python. Your communication skills should be excellent as you will be interacting with US-based customers. Key Responsibilities: - Strong experience in requirement analysis, test cases definition, test execution, test results reporting, and defect reporting/tracking. - Exposure to device testing and test data simulation. - Proficiency in using test and defect management tools like Jira. - Conduct Compatibility Testing on Mobile applications for both Android and iOS (Good to have). - Diverse experience in testing products involving mobile applications, hardware, Bluetooth, and/or Cloud data (good to have). - Experience in automation testing in the medical industry or regulated industry with an emphasis on quality. - Conduct phone application testing beyond UI, such as interfacing with hardware and Cloud server. - Full verification abilities including requirements analysis, test case definition, and defect reporting. Qualifications Required: - 8+ years of experience in both manual and automation testing. - Experience in Automation based on BDD. - Strong experience in Appium using Python. - Good communication skills to interact with US-based customers. - Exposure to device testing and test data simulation. - Experience in test and defect management tools like Jira. - Experience in compatibility testing on mobile applications for Android and iOS (Good to have). - Diverse experience testing products involving mobile applications, hardware, Bluetooth, and/or Cloud data (good to have). - Experience in automation testing in the medical industry or regulated industry with an emphasis on quality. - Full verification abilities including requirements analysis, test case definition, and defect reporting. (Note: Additional details about the company were not provided in the job description.),

Role Overview: As a Commissioning Engineer for Battery Energy Storage Systems (BESS), your mission is to lead and execute comprehensive on-site commissioning, functional verification, and performance optimization of BESS control and automation systems globally. You will ensure the seamless integration and reliable operation of Battery Management Systems (BMS), Power Conversion Systems (PCS), Energy Management Systems (EMS), and associated control logic, delivering safe and high-performing BESS solutions to our customers worldwide. Key Responsibilities: - Lead the end-to-end functional testing and verification of BESS control logics, including BMS, PCS, and EMS. - Verify the accurate configuration and operation of PLCs, RTUs, IEDs, and associated control logic for BESS applications. - Perform comprehensive communication tests to ensure robust data exchange between all BESS components and the overarching control system using various industrial protocols. - Conduct detailed troubleshooting of complex system interdependencies across hardware, software, and communication networks. - Perform initial performance tuning and optimization of BESS control parameters to ensure optimal system response, stability, and efficiency. - Coordinate extensively with project managers, site construction teams, client representatives, and subcontractors to ensure smooth commissioning progress. - Conduct proactive risk assessments (RAMS) and implement mitigation strategies for all commissioning tasks. - Verify that BESS control and safety systems comply with relevant international and local standards (e.g., ISO/IEC, grid codes, electrical safety regulations). - Prepare detailed commissioning reports, test protocols, as-built documentation, and punch lists for BESS control and automation systems. - Provide comprehensive hands-on training and technical support to client operations and maintenance teams, ensuring their capability to operate and maintain the BESS. - Contribute to the internal knowledge base by documenting common troubleshooting scenarios, developing best practices, and proposing improvements to commissioning procedures and tools based on field experience. - Participate in cross-functional project meetings, providing crucial commissioning insights for planning and scheduling. - Liaise effectively with remote engineering teams (electrical, software, protection) for technical support and complex issue resolution. - Coordinate with vendors and suppliers of BESS components to resolve technical issues and ensure system compatibility during commissioning. - Maintain clear and concise communication with clients regarding commissioning progress, challenges, and resolutions. - Set up alarms, trends, and reports for performance monitoring and fault detection. - Analyze system data to identify inefficiencies and recommend improvements. - Utilize Micro SCADA tools for system configuration, diagnostics, and performance tuning. - Stay updated with the latest SCADA technologies and tools relevant to BESS. - Prepare technical documentation including system architecture, configuration manuals, and user guides. - Responsible to ensure compliance with applicable external and internal regulations, procedures, and guidelines. Qualifications Required: - Bachelor's degree in electrical engineering, Electronics Engineering, Control Systems Engineering, Automation Engineering. - 5-10 years of progressive experience in engineering and on-site commissioning of industrial automation, control systems, and power electronics, with a strong focus on utility-scale Battery Energy Storage Systems (BESS) or large-scale renewable energy generation facilities. Experience with diverse battery chemistries (e.g., Li-ion, flow batteries) is a plus. - Willingness and ability to travel extensively (up to 70-80%) globally to project sites for commissioning activities. - Proficiency in both spoken & written English language is required.,