# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-

#

# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc.

# Written by Gordon Matzigkeit, 1996

#

# This file is free software; the Free Software Foundation gives

# unlimited permission to copy and/or distribute it, with or without

# modifications, as long as this notice is preserved.

m4_define([_LT_COPYING], [dnl

# Copyright (C) 2014 Free Software Foundation, Inc.

# This is free software; see the source for copying conditions. There is NO

# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

# GNU Libtool is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 2 of of the License, or

# (at your option) any later version.

#

# As a special exception to the GNU General Public License, if you

# distribute this file as part of a program or library that is built

# using GNU Libtool, you may include this file under the same

# distribution terms that you use for the rest of that program.

#

# GNU Libtool is distributed in the hope that it will be useful, but

# WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program. If not, see <http://www.gnu.org/licenses/>.

])

# serial 58 LT_INIT

# LT_PREREQ(VERSION)

# ------------------

# Complain and exit if this libtool version is less that VERSION.

m4_defun([LT_PREREQ],

[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,

[m4_default([$3],

[m4_fatal([Libtool version $1 or higher is required],

63)])],

[$2])])

# _LT_CHECK_BUILDDIR

# ------------------

# Complain if the absolute build directory name contains unusual characters

m4_defun([_LT_CHECK_BUILDDIR],

[case `pwd` in

*\ * | *\ *)

AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;

esac

])

# LT_INIT([OPTIONS])

# ------------------

AC_DEFUN([LT_INIT],

[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK

AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl

AC_BEFORE([$0], [LT_LANG])dnl

AC_BEFORE([$0], [LT_OUTPUT])dnl

AC_BEFORE([$0], [LTDL_INIT])dnl

m4_require([_LT_CHECK_BUILDDIR])dnl

dnl Autoconf doesn't catch unexpanded LT_ macros by default:

m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl

m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl

dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4

dnl unless we require an AC_DEFUNed macro:

AC_REQUIRE([LTOPTIONS_VERSION])dnl

AC_REQUIRE([LTSUGAR_VERSION])dnl

AC_REQUIRE([LTVERSION_VERSION])dnl

AC_REQUIRE([LTOBSOLETE_VERSION])dnl

m4_require([_LT_PROG_LTMAIN])dnl

_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])

dnl Parse OPTIONS

_LT_SET_OPTIONS([$0], [$1])

# This can be used to rebuild libtool when needed

LIBTOOL_DEPS=$ltmain

# Always use our own libtool.

LIBTOOL='$(SHELL) $(top_builddir)/libtool'

AC_SUBST(LIBTOOL)dnl

_LT_SETUP

# Only expand once:

m4_define([LT_INIT])

])# LT_INIT

# Old names:

AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])

AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])

dnl aclocal-1.4 backwards compatibility:

dnl AC_DEFUN([AC_PROG_LIBTOOL], [])

dnl AC_DEFUN([AM_PROG_LIBTOOL], [])

# _LT_PREPARE_CC_BASENAME

# -----------------------

m4_defun([_LT_PREPARE_CC_BASENAME], [

# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.

func_cc_basename ()

{

for cc_temp in @S|@*""; do

case $cc_temp in

compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;

distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;

\-*) ;;

*) break;;

esac

done

func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`

}

])# _LT_PREPARE_CC_BASENAME

# _LT_CC_BASENAME(CC)

# -------------------

# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,

# but that macro is also expanded into generated libtool script, which

# arranges for $SED and $ECHO to be set by different means.

m4_defun([_LT_CC_BASENAME],

[m4_require([_LT_PREPARE_CC_BASENAME])dnl

AC_REQUIRE([_LT_DECL_SED])dnl

AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl

func_cc_basename $1

cc_basename=$func_cc_basename_result

])

# _LT_FILEUTILS_DEFAULTS

# ----------------------

# It is okay to use these file commands and assume they have been set

# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'.

m4_defun([_LT_FILEUTILS_DEFAULTS],

[: ${CP="cp -f"}

: ${MV="mv -f"}

: ${RM="rm -f"}

])# _LT_FILEUTILS_DEFAULTS

# _LT_SETUP

# ---------

m4_defun([_LT_SETUP],

[AC_REQUIRE([AC_CANONICAL_HOST])dnl

AC_REQUIRE([AC_CANONICAL_BUILD])dnl

AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl

AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl

_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl

dnl

_LT_DECL([], [host_alias], [0], [The host system])dnl

_LT_DECL([], [host], [0])dnl

_LT_DECL([], [host_os], [0])dnl

dnl

_LT_DECL([], [build_alias], [0], [The build system])dnl

_LT_DECL([], [build], [0])dnl

_LT_DECL([], [build_os], [0])dnl

dnl

AC_REQUIRE([AC_PROG_CC])dnl

AC_REQUIRE([LT_PATH_LD])dnl

AC_REQUIRE([LT_PATH_NM])dnl

dnl

AC_REQUIRE([AC_PROG_LN_S])dnl

test -z "$LN_S" && LN_S="ln -s"

_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl

dnl

AC_REQUIRE([LT_CMD_MAX_LEN])dnl

_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl

_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl

dnl

m4_require([_LT_FILEUTILS_DEFAULTS])dnl

m4_require([_LT_CHECK_SHELL_FEATURES])dnl

m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl

m4_require([_LT_CMD_RELOAD])dnl

m4_require([_LT_CHECK_MAGIC_METHOD])dnl

m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl

m4_require([_LT_CMD_OLD_ARCHIVE])dnl

m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl

m4_require([_LT_WITH_SYSROOT])dnl

m4_require([_LT_CMD_TRUNCATE])dnl

_LT_CONFIG_LIBTOOL_INIT([

# See if we are running on zsh, and set the options that allow our

# commands through without removal of \ escapes INIT.

if test -n "\${ZSH_VERSION+set}"; then

setopt NO_GLOB_SUBST

fi

])

if test -n "${ZSH_VERSION+set}"; then

setopt NO_GLOB_SUBST

fi

_LT_CHECK_OBJDIR

m4_require([_LT_TAG_COMPILER])dnl

case $host_os in

aix3*)

# AIX sometimes has problems with the GCC collect2 program. For some

# reason, if we set the COLLECT_NAMES environment variable, the problems

# vanish in a puff of smoke.

if test set != "${COLLECT_NAMES+set}"; then

COLLECT_NAMES=

export COLLECT_NAMES

fi

;;

esac

# Global variables:

ofile=libtool

can_build_shared=yes

# All known linkers require a '.a' archive for static linking (except MSVC,

# which needs '.lib').

libext=a

with_gnu_ld=$lt_cv_prog_gnu_ld

old_CC=$CC

old_CFLAGS=$CFLAGS

# Set sane defaults for various variables

test -z "$CC" && CC=cc

test -z "$LTCC" && LTCC=$CC

test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS

test -z "$LD" && LD=ld

test -z "$ac_objext" && ac_objext=o

_LT_CC_BASENAME([$compiler])

# Only perform the check for file, if the check method requires it

test -z "$MAGIC_CMD" && MAGIC_CMD=file

case $deplibs_check_method in

file_magic*)

if test "$file_magic_cmd" = '$MAGIC_CMD'; then

_LT_PATH_MAGIC

fi

;;

esac

# Use C for the default configuration in the libtool script

LT_SUPPORTED_TAG([CC])

_LT_LANG_C_CONFIG

_LT_LANG_DEFAULT_CONFIG

_LT_CONFIG_COMMANDS

])# _LT_SETUP

# _LT_PREPARE_SED_QUOTE_VARS

# --------------------------

# Define a few sed substitution that help us do robust quoting.

m4_defun([_LT_PREPARE_SED_QUOTE_VARS],

[# Backslashify metacharacters that are still active within

# double-quoted strings.

sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'

# Same as above, but do not quote variable references.

double_quote_subst='s/\([["`\\]]\)/\\\1/g'

# Sed substitution to delay expansion of an escaped shell variable in a

# double_quote_subst'ed string.

delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'

# Sed substitution to delay expansion of an escaped single quote.

delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'

# Sed substitution to avoid accidental globbing in evaled expressions

no_glob_subst='s/\*/\\\*/g'

])

# _LT_PROG_LTMAIN

# ---------------

# Note that this code is called both from 'configure', and 'config.status'

# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,

# 'config.status' has no value for ac_aux_dir unless we are using Automake,

# so we pass a copy along to make sure it has a sensible value anyway.

m4_defun([_LT_PROG_LTMAIN],

[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl

_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])

ltmain=$ac_aux_dir/ltmain.sh

])# _LT_PROG_LTMAIN

## ------------------------------------- ##

## Accumulate code for creating libtool. ##

## ------------------------------------- ##

# So that we can recreate a full libtool script including additional

# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS

# in macros and then make a single call at the end using the 'libtool'

# label.

# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])

# ----------------------------------------

# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.

m4_define([_LT_CONFIG_LIBTOOL_INIT],

[m4_ifval([$1],

[m4_append([_LT_OUTPUT_LIBTOOL_INIT],

[$1

])])])

# Initialize.

m4_define([_LT_OUTPUT_LIBTOOL_INIT])

# _LT_CONFIG_LIBTOOL([COMMANDS])

# ------------------------------

# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.

m4_define([_LT_CONFIG_LIBTOOL],

[m4_ifval([$1],

[m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],

[$1

])])])

# Initialize.

m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])

# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])

# -----------------------------------------------------

m4_defun([_LT_CONFIG_SAVE_COMMANDS],

[_LT_CONFIG_LIBTOOL([$1])

_LT_CONFIG_LIBTOOL_INIT([$2])

])

# _LT_FORMAT_COMMENT([COMMENT])

# -----------------------------

# Add leading comment marks to the start of each line, and a trailing

# full-stop to the whole comment if one is not present already.

m4_define([_LT_FORMAT_COMMENT],

[m4_ifval([$1], [

m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],

[['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])

)])

## ------------------------ ##

## FIXME: Eliminate VARNAME ##

## ------------------------ ##

# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])

# -------------------------------------------------------------------

# CONFIGNAME is the name given to the value in the libtool script.

# VARNAME is the (base) name used in the configure script.

# VALUE may be 0, 1 or 2 for a computed quote escaped value based on

# VARNAME. Any other value will be used directly.

m4_define([_LT_DECL],

[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],

[lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],

[m4_ifval([$1], [$1], [$2])])

lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])

m4_ifval([$4],

[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])

lt_dict_add_subkey([lt_decl_dict], [$2],

[tagged?], [m4_ifval([$5], [yes], [no])])])

])

# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])

# --------------------------------------------------------

m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])

# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])

# ------------------------------------------------

m4_define([lt_decl_tag_varnames],

[_lt_decl_filter([tagged?], [yes], $@)])

# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])

# ---------------------------------------------------------

m4_define([_lt_decl_filter],

[m4_case([$#],

[0], [m4_fatal([$0: too few arguments: $#])],

[1], [m4_fatal([$0: too few arguments: $#: $1])],

[2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],

[3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],

[lt_dict_filter([lt_decl_dict], $@)])[]dnl

])

# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])

# --------------------------------------------------

m4_define([lt_decl_quote_varnames],

[_lt_decl_filter([value], [1], $@)])

# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])

# ---------------------------------------------------

m4_define([lt_decl_dquote_varnames],

[_lt_decl_filter([value], [2], $@)])

# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])

# ---------------------------------------------------

m4_define([lt_decl_varnames_tagged],

[m4_assert([$# <= 2])dnl

_$0(m4_quote(m4_default([$1], [[, ]])),

m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),

m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])

m4_define([_lt_decl_varnames_tagged],

[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])

# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])

# ------------------------------------------------

m4_define([lt_decl_all_varnames],

[_$0(m4_quote(m4_default([$1], [[, ]])),

m4_if([$2], [],

m4_quote(lt_decl_varnames),

m4_quote(m4_shift($@))))[]dnl

])

m4_define([_lt_decl_all_varnames],

[lt_join($@, lt_decl_varnames_tagged([$1],

lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl

])

# _LT_CONFIG_STATUS_DECLARE([VARNAME])

# ------------------------------------

# Quote a variable value, and forward it to 'config.status' so that its

# declaration there will have the same value as in 'configure'. VARNAME

# must have a single quote delimited value for this to work.

m4_define([_LT_CONFIG_STATUS_DECLARE],

[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])

# _LT_CONFIG_STATUS_DECLARATIONS

# ------------------------------

# We delimit libtool config variables with single quotes, so when

# we write them to config.status, we have to be sure to quote all

# embedded single quotes properly. In configure, this macro expands

# each variable declared with _LT_DECL (and _LT_TAGDECL) into:

#

# <var>='`$ECHO "$<var>" | $SED "$delay_single_quote_subst"`'

m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],

[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),

[m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])

# _LT_LIBTOOL_TAGS

# ----------------

# Output comment and list of tags supported by the script

m4_defun([_LT_LIBTOOL_TAGS],

[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl

available_tags='_LT_TAGS'dnl

])

# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])

# -----------------------------------

# Extract the dictionary values for VARNAME (optionally with TAG) and

# expand to a commented shell variable setting:

#

# # Some comment about what VAR is for.

# visible_name=$lt_internal_name

m4_define([_LT_LIBTOOL_DECLARE],

[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],

[description])))[]dnl

m4_pushdef([_libtool_name],

m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl

m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),

[0], [_libtool_name=[$]$1],

[1], [_libtool_name=$lt_[]$1],

[2], [_libtool_name=$lt_[]$1],

[_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl

m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl

])

# _LT_LIBTOOL_CONFIG_VARS

# -----------------------

# Produce commented declarations of non-tagged libtool config variables

# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'

# script. Tagged libtool config variables (even for the LIBTOOL CONFIG

# section) are produced by _LT_LIBTOOL_TAG_VARS.

m4_defun([_LT_LIBTOOL_CONFIG_VARS],

[m4_foreach([_lt_var],

m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),

[m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])

# _LT_LIBTOOL_TAG_VARS(TAG)

# -------------------------

m4_define([_LT_LIBTOOL_TAG_VARS],

[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),

[m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])

# _LT_TAGVAR(VARNAME, [TAGNAME])

# ------------------------------

m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])

# _LT_CONFIG_COMMANDS

# -------------------

# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of

# variables for single and double quote escaping we saved from calls

# to _LT_DECL, we can put quote escaped variables declarations

# into 'config.status', and then the shell code to quote escape them in

# for loops in 'config.status'. Finally, any additional code accumulated

# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.

m4_defun([_LT_CONFIG_COMMANDS],

[AC_PROVIDE_IFELSE([LT_OUTPUT],

dnl If the libtool generation code has been placed in $CONFIG_LT,

dnl instead of duplicating it all over again into config.status,

dnl then we will have config.status run $CONFIG_LT later, so it

dnl needs to know what name is stored there:

[AC_CONFIG_COMMANDS([libtool],

[$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],

dnl If the libtool generation code is destined for config.status,

dnl expand the accumulated commands and init code now:

[AC_CONFIG_COMMANDS([libtool],

[_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])

])#_LT_CONFIG_COMMANDS

# Initialize.

m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],

[

# The HP-UX ksh and POSIX shell print the target directory to stdout

# if CDPATH is set.

(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

sed_quote_subst='$sed_quote_subst'

double_quote_subst='$double_quote_subst'

delay_variable_subst='$delay_variable_subst'

_LT_CONFIG_STATUS_DECLARATIONS

LTCC='$LTCC'

LTCFLAGS='$LTCFLAGS'

compiler='$compiler_DEFAULT'

# A function that is used when there is no print builtin or printf.

func_fallback_echo ()

{

eval 'cat <<_LTECHO_EOF

\$[]1

_LTECHO_EOF'

}

# Quote evaled strings.

for var in lt_decl_all_varnames([[ \

]], lt_decl_quote_varnames); do

case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in

*[[\\\\\\\`\\"\\\$]]*)

eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes

;;

*)

eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""

;;

esac

done

# Double-quote double-evaled strings.

for var in lt_decl_all_varnames([[ \

]], lt_decl_dquote_varnames); do

case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in

*[[\\\\\\\`\\"\\\$]]*)

eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes

;;

*)

eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""

;;

esac

done

_LT_OUTPUT_LIBTOOL_INIT

])

# _LT_GENERATED_FILE_INIT(FILE, [COMMENT])

# ------------------------------------

# Generate a child script FILE with all initialization necessary to

# reuse the environment learned by the parent script, and make the

# file executable. If COMMENT is supplied, it is inserted after the

# '#!' sequence but before initialization text begins. After this

# macro, additional text can be appended to FILE to form the body of

# the child script. The macro ends with non-zero status if the

# file could not be fully written (such as if the disk is full).

m4_ifdef([AS_INIT_GENERATED],

[m4_defun([_LT_GENERATED_FILE_INIT],[AS_INIT_GENERATED($@)])],

[m4_defun([_LT_GENERATED_FILE_INIT],

[m4_require([AS_PREPARE])]dnl

[m4_pushdef([AS_MESSAGE_LOG_FD])]dnl

[lt_write_fail=0

cat >$1 <<_ASEOF || lt_write_fail=1

#! $SHELL

# Generated by $as_me.

$2

SHELL=\${CONFIG_SHELL-$SHELL}

export SHELL

_ASEOF

cat >>$1 <<\_ASEOF || lt_write_fail=1

AS_SHELL_SANITIZE

_AS_PREPARE

exec AS_MESSAGE_FD>&1

_ASEOF

test 0 = "$lt_write_fail" && chmod +x $1[]dnl

m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT

# LT_OUTPUT

# ---------

# This macro allows early generation of the libtool script (before

# AC_OUTPUT is called), incase it is used in configure for compilation

# tests.

AC_DEFUN([LT_OUTPUT],

[: ${CONFIG_LT=./config.lt}

AC_MSG_NOTICE([creating $CONFIG_LT])

_LT_GENERATED_FILE_INIT(["$CONFIG_LT"],

[# Run this file to recreate a libtool stub with the current configuration.])

cat >>"$CONFIG_LT" <<\_LTEOF

lt_cl_silent=false

exec AS_MESSAGE_LOG_FD>>config.log

{

echo

AS_BOX([Running $as_me.])

} >&AS_MESSAGE_LOG_FD

lt_cl_help="\

'$as_me' creates a local libtool stub from the current configuration,

for use in further configure time tests before the real libtool is

generated.

Usage: $[0] [[OPTIONS]]

-h, --help print this help, then exit

-V, --version print version number, then exit

-q, --quiet do not print progress messages

-d, --debug don't remove temporary files

Report bugs to <bug-libtool@gnu.org>."

lt_cl_version="\

m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl

m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])

configured by $[0], generated by m4_PACKAGE_STRING.

Copyright (C) 2011 Free Software Foundation, Inc.

This config.lt script is free software; the Free Software Foundation

gives unlimited permision to copy, distribute and modify it."

while test 0 != $[#]

do

case $[1] in

--version | --v* | -V )

echo "$lt_cl_version"; exit 0 ;;

--help | --h* | -h )

echo "$lt_cl_help"; exit 0 ;;

--debug | --d* | -d )

debug=: ;;

--quiet | --q* | --silent | --s* | -q )

lt_cl_silent=: ;;

-*) AC_MSG_ERROR([unrecognized option: $[1]

Try '$[0] --help' for more information.]) ;;

*) AC_MSG_ERROR([unrecognized argument: $[1]

Try '$[0] --help' for more information.]) ;;

esac

shift

done

if $lt_cl_silent; then

exec AS_MESSAGE_FD>/dev/null

fi

_LTEOF

cat >>"$CONFIG_LT" <<_LTEOF

_LT_OUTPUT_LIBTOOL_COMMANDS_INIT

_LTEOF

cat >>"$CONFIG_LT" <<\_LTEOF

AC_MSG_NOTICE([creating $ofile])

_LT_OUTPUT_LIBTOOL_COMMANDS

AS_EXIT(0)

_LTEOF

chmod +x "$CONFIG_LT"

# configure is writing to config.log, but config.lt does its own redirection,

# appending to config.log, which fails on DOS, as config.log is still kept

# open by configure. Here we exec the FD to /dev/null, effectively closing

# config.log, so it can be properly (re)opened and appended to by config.lt.

lt_cl_success=:

test yes = "$silent" &&

lt_config_lt_args="$lt_config_lt_args --quiet"

exec AS_MESSAGE_LOG_FD>/dev/null

$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false

exec AS_MESSAGE_LOG_FD>>config.log

$lt_cl_success || AS_EXIT(1)

])# LT_OUTPUT

# _LT_CONFIG(TAG)

# ---------------

# If TAG is the built-in tag, create an initial libtool script with a

# default configuration from the untagged config vars. Otherwise add code

# to config.status for appending the configuration named by TAG from the

# matching tagged config vars.

m4_defun([_LT_CONFIG],

[m4_require([_LT_FILEUTILS_DEFAULTS])dnl

_LT_CONFIG_SAVE_COMMANDS([

m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl

m4_if(_LT_TAG, [C], [

# See if we are running on zsh, and set the options that allow our

# commands through without removal of \ escapes.

if test -n "${ZSH_VERSION+set}"; then

setopt NO_GLOB_SUBST

fi

cfgfile=${ofile}T

trap "$RM \"$cfgfile\"; exit 1" 1 2 15

$RM "$cfgfile"

cat <<_LT_EOF >> "$cfgfile"

#! $SHELL

# Generated automatically by $as_me ($PACKAGE) $VERSION

# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:

# NOTE: Changes made to this file will be lost: look at ltmain.sh.

# Provide generalized library-building support services.

# Written by Gordon Matzigkeit, 1996

_LT_COPYING

_LT_LIBTOOL_TAGS

# Configured defaults for sys_lib_dlsearch_path munging.

: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}

# ### BEGIN LIBTOOL CONFIG

_LT_LIBTOOL_CONFIG_VARS

_LT_LIBTOOL_TAG_VARS

# ### END LIBTOOL CONFIG

_LT_EOF

cat <<'_LT_EOF' >> "$cfgfile"

# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE

_LT_PREPARE_MUNGE_PATH_LIST

_LT_PREPARE_CC_BASENAME

# ### END FUNCTIONS SHARED WITH CONFIGURE

_LT_EOF

case $host_os in

aix3*)

cat <<\_LT_EOF >> "$cfgfile"

# AIX sometimes has problems with the GCC collect2 program. For some

# reason, if we set the COLLECT_NAMES environment variable, the problems

# vanish in a puff of smoke.

if test set != "${COLLECT_NAMES+set}"; then

COLLECT_NAMES=

export COLLECT_NAMES

fi

_LT_EOF

;;

esac

_LT_PROG_LTMAIN

# We use sed instead of cat because bash on DJGPP gets confused if

# if finds mixed CR/LF and LF-only lines. Since sed operates in

# text mode, it properly converts lines to CR/LF. This bash problem

# is reportedly fixed, but why not run on old versions too?

sed '$q' "$ltmain" >> "$cfgfile" \

|| (rm -f "$cfgfile"; exit 1)

mv -f "$cfgfile" "$ofile" ||

(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")

chmod +x "$ofile"

],

[cat <<_LT_EOF >> "$ofile"

dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded

dnl in a comment (ie after a #).

# ### BEGIN LIBTOOL TAG CONFIG: $1

_LT_LIBTOOL_TAG_VARS(_LT_TAG)

# ### END LIBTOOL TAG CONFIG: $1

_LT_EOF

])dnl /m4_if

],

[m4_if([$1], [], [

PACKAGE='$PACKAGE'

VERSION='$VERSION'

RM='$RM'

ofile='$ofile'], [])

])dnl /_LT_CONFIG_SAVE_COMMANDS

])# _LT_CONFIG

# LT_SUPPORTED_TAG(TAG)

# ---------------------

# Trace this macro to discover what tags are supported by the libtool

# --tag option, using:

# autoconf --trace 'LT_SUPPORTED_TAG:$1'

AC_DEFUN([LT_SUPPORTED_TAG], [])

# C support is built-in for now

m4_define([_LT_LANG_C_enabled], [])

m4_define([_LT_TAGS], [])

# LT_LANG(LANG)

# -------------

# Enable libtool support for the given language if not already enabled.

AC_DEFUN([LT_LANG],

[AC_BEFORE([$0], [LT_OUTPUT])dnl

m4_case([$1],

[C], [_LT_LANG(C)],

[C++], [_LT_LANG(CXX)],

[Go], [_LT_LANG(GO)],

[Java], [_LT_LANG(GCJ)],

[Fortran 77], [_LT_LANG(F77)],

[Fortran], [_LT_LANG(FC)],

[Windows Resource], [_LT_LANG(RC)],

[m4_ifdef([_LT_LANG_]$1[_CONFIG],

[_LT_LANG($1)],

[m4_fatal([$0: unsupported language: "$1"])])])dnl

])# LT_LANG

# _LT_LANG(LANGNAME)

# ------------------

m4_defun([_LT_LANG],

[m4_ifdef([_LT_LANG_]$1[_enabled], [],

[LT_SUPPORTED_TAG([$1])dnl

m4_append([_LT_TAGS], [$1 ])dnl

m4_define([_LT_LANG_]$1[_enabled], [])dnl

_LT_LANG_$1_CONFIG($1)])dnl

])# _LT_LANG

m4_ifndef([AC_PROG_GO], [

############################################################

# NOTE: This macro has been submitted for inclusion into #

# GNU Autoconf as AC_PROG_GO. When it is available in #

# a released version of Autoconf we should remove this #

# macro and use it instead. #

############################################################

m4_defun([AC_PROG_GO],

[AC_LANG_PUSH(Go)dnl

AC_ARG_VAR([GOC], [Go compiler command])dnl

AC_ARG_VAR([GOFLAGS], [Go compiler flags])dnl

_AC_ARG_VAR_LDFLAGS()dnl

AC_CHECK_TOOL(GOC, gccgo)

if test -z "$GOC"; then

if test -n "$ac_tool_prefix"; then

AC_CHECK_PROG(GOC, [${ac_tool_prefix}gccgo], [${ac_tool_prefix}gccgo])

fi

fi

if test -z "$GOC"; then

AC_CHECK_PROG(GOC, gccgo, gccgo, false)

fi

])#m4_defun

])#m4_ifndef

# _LT_LANG_DEFAULT_CONFIG

# -----------------------

m4_defun([_LT_LANG_DEFAULT_CONFIG],

[AC_PROVIDE_IFELSE([AC_PROG_CXX],

[LT_LANG(CXX)],

[m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])

AC_PROVIDE_IFELSE([AC_PROG_F77],

[LT_LANG(F77)],

[m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])

AC_PROVIDE_IFELSE([AC_PROG_FC],

[LT_LANG(FC)],

[m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])

dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal

dnl pulling things in needlessly.

AC_PROVIDE_IFELSE([AC_PROG_GCJ],

[LT_LANG(GCJ)],

[AC_PROVIDE_IFELSE([A][M_PROG_GCJ],

[LT_LANG(GCJ)],

[AC_PROVIDE_IFELSE([LT_PROG_GCJ],

[LT_LANG(GCJ)],

[m4_ifdef([AC_PROG_GCJ],

[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])

m4_ifdef([A][M_PROG_GCJ],

[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])

m4_ifdef([LT_PROG_GCJ],

[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])

AC_PROVIDE_IFELSE([AC_PROG_GO],

[LT_LANG(GO)],

[m4_define([AC_PROG_GO], defn([AC_PROG_GO])[LT_LANG(GO)])])

AC_PROVIDE_IFELSE([LT_PROG_RC],

[LT_LANG(RC)],

[m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])

])# _LT_LANG_DEFAULT_CONFIG

# Obsolete macros:

AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])

AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])

AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])

AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])

AU_DEFUN([AC_LIBTOOL_RC], [LT_LANG(Windows Resource)])

dnl aclocal-1.4 backwards compatibility:

dnl AC_DEFUN([AC_LIBTOOL_CXX], [])

dnl AC_DEFUN([AC_LIBTOOL_F77], [])

dnl AC_DEFUN([AC_LIBTOOL_FC], [])

dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])

dnl AC_DEFUN([AC_LIBTOOL_RC], [])

# _LT_TAG_COMPILER

# ----------------

m4_defun([_LT_TAG_COMPILER],

[AC_REQUIRE([AC_PROG_CC])dnl

_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl

_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl

_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl

_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl

# If no C compiler was specified, use CC.

LTCC=${LTCC-"$CC"}

# If no C compiler flags were specified, use CFLAGS.

LTCFLAGS=${LTCFLAGS-"$CFLAGS"}

# Allow CC to be a program name with arguments.

compiler=$CC

])# _LT_TAG_COMPILER

# _LT_COMPILER_BOILERPLATE

# ------------------------

# Check for compiler boilerplate output or warnings with

# the simple compiler test code.

m4_defun([_LT_COMPILER_BOILERPLATE],

[m4_require([_LT_DECL_SED])dnl

ac_outfile=conftest.$ac_objext

echo "$lt_simple_compile_test_code" >conftest.$ac_ext

eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err

_lt_compiler_boilerplate=`cat conftest.err`

$RM conftest*

])# _LT_COMPILER_BOILERPLATE

# _LT_LINKER_BOILERPLATE

# ----------------------

# Check for linker boilerplate output or warnings with

# the simple link test code.

m4_defun([_LT_LINKER_BOILERPLATE],

[m4_require([_LT_DECL_SED])dnl

ac_outfile=conftest.$ac_objext

echo "$lt_simple_link_test_code" >conftest.$ac_ext

eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err

_lt_linker_boilerplate=`cat conftest.err`

$RM -r conftest*

])# _LT_LINKER_BOILERPLATE

# _LT_REQUIRED_DARWIN_CHECKS

# -------------------------

m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[

case $host_os in

rhapsody* | darwin*)

AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])

AC_CHECK_TOOL([NMEDIT], [nmedit], [:])

AC_CHECK_TOOL([LIPO], [lipo], [:])

AC_CHECK_TOOL([OTOOL], [otool], [:])

AC_CHECK_TOOL([OTOOL64], [otool64], [:])

_LT_DECL([], [DSYMUTIL], [1],

[Tool to manipulate archived DWARF debug symbol files on Mac OS X])

_LT_DECL([], [NMEDIT], [1],

[Tool to change global to local symbols on Mac OS X])

_LT_DECL([], [LIPO], [1],

[Tool to manipulate fat objects and archives on Mac OS X])

_LT_DECL([], [OTOOL], [1],

[ldd/readelf like tool for Mach-O binaries on Mac OS X])

_LT_DECL([], [OTOOL64], [1],

[ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])

AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],

[lt_cv_apple_cc_single_mod=no

if test -z "$LT_MULTI_MODULE"; then

# By default we will add the -single_module flag. You can override