Dear @cpq @novlean,
Thanks for your great efforts.
My code was running perfectly with Mdash V1.2.14 & the esp-Arduino V1.0.6.
Recently, I have upgraded the esp-Arduino version from V1.0.6 to V2.0.9 & the mDash version from V1.2.14 to V1.2.16.
Now, when I am using mDashShadowUpdate("{%Q:{%Q:{%Q:%Q}}}","state", "reported", "Key", "Success"); . It is stopping the loop() task & the Mdash goes offline & comes back. The Mdash is working such as FS & RPC, But the execution of loop() task is stopped.
Some Insights:
I have checked the mDashNotify() function, saw MDashMutexLock() initialization. I have a doubt that may be the Mutex is stopping the loop() function or some other freeRTOS related problems.
Build Logs:
Processing esp32dev (platform: espressif32@6.3.1; board: esp32dev; framework: arduino)
-------------------------------------------------------------------------------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32dev.html
PLATFORM: Espressif 32 (6.3.1) > Espressif ESP32 Dev Module
HARDWARE: ESP32 240MHz, 320KB RAM, 16MB Flash
DEBUG: Current (esp-prog) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES:
- framework-arduinoespressif32 @ 3.20009.0 (2.0.9)
- tool-esptoolpy @ 1.40501.0 (4.5.1)
- toolchain-xtensa-esp32 @ 8.4.0+2021r2-patch5
LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Found 59 compatible libraries
Scanning dependencies...
Dependency Graph
|-- mDash @ 1.2.16+sha.8bd6647
|-- eModbus @ 1.3.0
Platform.ini file:
[platformio]
default_envs =
[env:esp32dev]
platform = espressif32@6.3.1
board = esp32dev
framework = arduino
board_upload.flash_size = 16MB
board_upload.maximum_size = 16777216
board_build.partitions = F:\Aspiration Energy\Heat Pump Monitoring\Hardware Development\Thermelgy tMY Future\Firmware\Development\Thermelgy Gen2 Gateway\Partition\Thermelgy_Custom_16MB.csv
monitor_speed = 115200
monitor_filters = esp32_exception_decoder
build_flags =
-Isdkconfig
-DLOG_LEVEL=LOG_LEVEL_ERROR
-DCORE_DEBUG_LEVEL=3
-DARDUINOJSON_USE_DOUBLE=0
lib_deps =
https://github.com/cesanta/mDash.git#1.2.16
eModbus@1.3.0
Kindly help me to solve the issue.
Dear @cpq @novlean,
Thanks for your great efforts.
My code was running perfectly with Mdash V1.2.14 & the esp-Arduino V1.0.6.
Recently, I have upgraded the esp-Arduino version from V1.0.6 to V2.0.9 & the mDash version from V1.2.14 to V1.2.16.
Now, when I am using
mDashShadowUpdate("{%Q:{%Q:{%Q:%Q}}}","state", "reported", "Key", "Success");. It is stopping the loop() task & the Mdash goes offline & comes back. The Mdash is working such as FS & RPC, But the execution of loop() task is stopped.Some Insights:
I have checked the mDashNotify() function, saw MDashMutexLock() initialization. I have a doubt that may be the Mutex is stopping the loop() function or some other freeRTOS related problems.
Build Logs:
Platform.ini file:
Kindly help me to solve the issue.