L’API REST est maintenant versionnée. Pour plus d’informations, consultez « À propos des versions de l’API ».

Points de terminaison d’API REST pour les packages

Utilisez l’API REST pour interagir avec GitHub Packages.

À propos de GitHub Packages

GitHub Packages prend en charge une plage de gestionnaires de packages pour la publication de packages. Pour plus d’informations, consultez « Introduction aux packages GitHub ».

Après publication d’un package, vous pouvez utiliser l’API REST pour gérer les packages dans vos référentiels et organisations GitHub. Pour plus d’informations, consultez « Suppression et restauration d'un package ».

Pour utiliser l’API REST afin de gérer GitHub Packages, vous devez vous authentifier avec un personal access token (classic).

Pour accéder aux métadonnées de package, votre jeton doit avoir l’étendue read:packages.
Pour supprimer des packages et des versions de package, votre jeton doit avoir les étendues read:packages et delete:packages.
Pour restaurer des packages et des versions de package, votre jeton doit avoir les étendues read:packages et write:packages.

Si votre package se trouve dans un registre qui prend en charge les autorisations granulaires, votre jeton n’a pas besoin de l’étendue repo pour accéder ou gérer ce package. Si votre package se trouve dans un registre qui prend en charge uniquement les autorisations limitées au dépôt, votre jeton doit aussi inclure l’étendue repo dans la mesure où votre package hérite des autorisations d’un dépôt GitHub. Pour obtenir la liste des registres qui prennent en charge uniquement les autorisations limitées au dépôt, consultez « À propos des autorisations pour les packages GitHub ».

Get list of conflicting packages during Docker migration for organization

Lists all packages that are in a specific organization, are readable by the requesting user, and that encountered a conflict during a Docker migration.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint.

Jetons d’accès affinés pour « Get list of conflicting packages during Docker migration for organization »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Ce point de terminaison peut être utilisé sans authentification ou si seules les ressources publiques sont demandées.

Paramètres pour « Get list of conflicting packages during Docker migration for organization »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`org` string Obligatoire The organization name. The name is not case sensitive.

Codes d’état de la réponse HTTP pour « Get list of conflicting packages during Docker migration for organization »

Code d’état	Description
`200`	OK
`401`	Requires authentication
`403`	Forbidden

Exemples de code pour « Get list of conflicting packages during Docker migration for organization »

Exemple de requête

get/orgs/{org}/docker/conflicts

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/orgs/ORG/docker/conflicts

Response

Status: 200

[
  {
    "id": 197,
    "name": "hello_docker",
    "package_type": "container",
    "owner": {
      "login": "github",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/github",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "Organization",
      "site_admin": false
    },
    "version_count": 1,
    "visibility": "private",
    "url": "https://api.github.com/orgs/github/packages/container/hello_docker",
    "created_at": "2020-05-19T22:19:11Z",
    "updated_at": "2020-05-19T22:19:11Z",
    "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker"
  },
  {
    "id": 198,
    "name": "goodbye_docker",
    "package_type": "container",
    "owner": {
      "login": "github",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/github",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "Organization",
      "site_admin": false
    },
    "version_count": 2,
    "visibility": "private",
    "url": "https://api.github.com/orgs/github/packages/container/goodbye_docker",
    "created_at": "2020-05-20T22:19:11Z",
    "updated_at": "2020-05-20T22:19:11Z",
    "html_url": "https://github.com/orgs/github/packages/container/package/goodbye_docker"
  }
]

List packages for an organization

Lists packages in an organization readable by the user.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « List packages for an organization »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « List packages for an organization »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`org` string Obligatoire The organization name. The name is not case sensitive.

Paramètres de requête
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`visibility` string The selected visibility of the packages. This parameter is optional and only filters an existing result set. The `internal` visibility is only supported for GitHub Packages registries that allow for granular permissions. For other ecosystems `internal` is synonymous with `private`. For the list of GitHub Packages registries that support granular permissions, see "About permissions for GitHub Packages." Peut être: `public`, `private`, `internal`
`page` integer The page number of the results to fetch. For more information, see "Using pagination in the REST API." Default: `1`
`per_page` integer The number of results per page (max 100). For more information, see "Using pagination in the REST API." Default: `30`

Codes d’état de la réponse HTTP pour « List packages for an organization »

Code d’état	Description
`200`	OK
`400`	The value of `per_page` multiplied by `page` cannot be greater than 10000.
`401`	Requires authentication
`403`	Forbidden

Exemples de code pour « List packages for an organization »

Exemple de requête

get/orgs/{org}/packages

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  "https://api.github.com/orgs/ORG/packages?package_type=container"

Response

Status: 200

[
  {
    "id": 197,
    "name": "hello_docker",
    "package_type": "container",
    "owner": {
      "login": "github",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/github",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "Organization",
      "site_admin": false
    },
    "version_count": 1,
    "visibility": "private",
    "url": "https://api.github.com/orgs/github/packages/container/hello_docker",
    "created_at": "2020-05-19T22:19:11Z",
    "updated_at": "2020-05-19T22:19:11Z",
    "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker"
  },
  {
    "id": 198,
    "name": "goodbye_docker",
    "package_type": "container",
    "owner": {
      "login": "github",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/github",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "Organization",
      "site_admin": false
    },
    "version_count": 2,
    "visibility": "private",
    "url": "https://api.github.com/orgs/github/packages/container/goodbye_docker",
    "created_at": "2020-05-20T22:19:11Z",
    "updated_at": "2020-05-20T22:19:11Z",
    "html_url": "https://github.com/orgs/github/packages/container/package/goodbye_docker"
  }
]

Get a package for an organization

Gets a specific package in an organization.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Get a package for an organization »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Get a package for an organization »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`org` string Obligatoire The organization name. The name is not case sensitive.

Codes d’état de la réponse HTTP pour « Get a package for an organization »

Code d’état	Description
`200`	OK

Exemples de code pour « Get a package for an organization »

Exemple de requête

get/orgs/{org}/packages/{package_type}/{package_name}

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 200

{
  "id": 197,
  "name": "hello_docker",
  "package_type": "container",
  "owner": {
    "login": "github",
    "id": 9919,
    "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
    "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
    "gravatar_id": "",
    "url": "https://api.github.com/users/github",
    "html_url": "https://github.com/github",
    "followers_url": "https://api.github.com/users/github/followers",
    "following_url": "https://api.github.com/users/github/following{/other_user}",
    "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
    "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
    "subscriptions_url": "https://api.github.com/users/github/subscriptions",
    "organizations_url": "https://api.github.com/users/github/orgs",
    "repos_url": "https://api.github.com/users/github/repos",
    "events_url": "https://api.github.com/users/github/events{/privacy}",
    "received_events_url": "https://api.github.com/users/github/received_events",
    "type": "Organization",
    "site_admin": false
  },
  "version_count": 1,
  "visibility": "private",
  "url": "https://api.github.com/orgs/github/packages/container/hello_docker",
  "created_at": "2020-05-19T22:19:11Z",
  "updated_at": "2020-05-19T22:19:11Z",
  "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker"
}

Delete a package for an organization

Deletes an entire package in an organization. You cannot delete a public package if any version of the package has more than 5,000 downloads. In this scenario, contact GitHub support for further assistance.

The authenticated user must have admin permissions in the organization to use this endpoint. If the package_type belongs to a GitHub Packages registry that supports granular permissions, the authenticated user must also have admin permissions to the package. For the list of these registries, see "About permissions for GitHub Packages."

OAuth app tokens and personal access tokens (classic) need the read:packages and delete:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Delete a package for an organization »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Delete a package for an organization »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`org` string Obligatoire The organization name. The name is not case sensitive.

Codes d’état de la réponse HTTP pour « Delete a package for an organization »

Code d’état	Description
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Exemples de code pour « Delete a package for an organization »

Exemple de requête

delete/orgs/{org}/packages/{package_type}/{package_name}

curl -L \
  -X DELETE \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 204

Restore a package for an organization

Restores an entire package in an organization.

You can restore a deleted package under the following conditions:

The package was deleted within the last 30 days.
The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

OAuth app tokens and personal access tokens (classic) need the read:packages and write:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Restore a package for an organization »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Jetons d’accès d’installation d’application GitHub

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Restore a package for an organization »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`org` string Obligatoire The organization name. The name is not case sensitive.

Paramètres de requête
Nom, Type, Description
`token` string package token

Codes d’état de la réponse HTTP pour « Restore a package for an organization »

Code d’état	Description
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Exemples de code pour « Restore a package for an organization »

Exemple de requête

post/orgs/{org}/packages/{package_type}/{package_name}/restore

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/restore

Response

Status: 204

List package versions for a package owned by an organization

Lists package versions for a package owned by an organization.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « List package versions for a package owned by an organization »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « List package versions for a package owned by an organization »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`org` string Obligatoire The organization name. The name is not case sensitive.

Paramètres de requête
Nom, Type, Description
`page` integer The page number of the results to fetch. For more information, see "Using pagination in the REST API." Default: `1`
`per_page` integer The number of results per page (max 100). For more information, see "Using pagination in the REST API." Default: `30`
`state` string The state of the package, either active or deleted. Default: `active` Peut être: `active`, `deleted`

Codes d’état de la réponse HTTP pour « List package versions for a package owned by an organization »

Code d’état	Description
`200`	OK
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Exemples de code pour « List package versions for a package owned by an organization »

Exemple de requête

get/orgs/{org}/packages/{package_type}/{package_name}/versions

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/versions

Response

Status: 200

[
  {
    "id": 245301,
    "name": "1.0.4",
    "url": "https://api.github.com/orgs/octo-org/packages/npm/hello-world-npm/versions/245301",
    "package_html_url": "https://github.com/octo-org/hello-world-npm/packages/43752",
    "created_at": "2019-11-05T22:49:04Z",
    "updated_at": "2019-11-05T22:49:04Z",
    "html_url": "https://github.com/octo-org/hello-world-npm/packages/43752?version=1.0.4",
    "metadata": {
      "package_type": "npm"
    }
  },
  {
    "id": 209672,
    "name": "1.0.3",
    "url": "https://api.github.com/orgs/octo-org/packages/npm/hello-world-npm/versions/209672",
    "package_html_url": "https://github.com/octo-org/hello-world-npm/packages/43752",
    "created_at": "2019-10-29T15:42:11Z",
    "updated_at": "2019-10-29T15:42:12Z",
    "html_url": "https://github.com/octo-org/hello-world-npm/packages/43752?version=1.0.3",
    "metadata": {
      "package_type": "npm"
    }
  }
]

Get a package version for an organization

Gets a specific package version in an organization.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Get a package version for an organization »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Get a package version for an organization »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`org` string Obligatoire The organization name. The name is not case sensitive.
`package_version_id` integer Obligatoire Unique identifier of the package version.

Codes d’état de la réponse HTTP pour « Get a package version for an organization »

Code d’état	Description
`200`	OK

Exemples de code pour « Get a package version for an organization »

Exemple de requête

get/orgs/{org}/packages/{package_type}/{package_name}/versions/{package_version_id}

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 200

{
  "id": 836,
  "name": "sha256:b3d3e366b55f9a54599220198b3db5da8f53592acbbb7dc7e4e9878762fc5344",
  "url": "https://api.github.com/orgs/github/packages/container/hello_docker/versions/836",
  "package_html_url": "https://github.com/orgs/github/packages/container/package/hello_docker",
  "created_at": "2020-05-19T22:19:11Z",
  "updated_at": "2020-05-19T22:19:11Z",
  "html_url": "https://github.com/orgs/github/packages/container/hello_docker/836",
  "metadata": {
    "package_type": "container",
    "container": {
      "tags": [
        "latest"
      ]
    }
  }
}

Delete package version for an organization

Deletes a specific package version in an organization. If the package is public and the package version has more than 5,000 downloads, you cannot delete the package version. In this scenario, contact GitHub support for further assistance.

OAuth app tokens and personal access tokens (classic) need the read:packages and delete:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Delete package version for an organization »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Jetons d’accès d’installation d’application GitHub

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Delete package version for an organization »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`org` string Obligatoire The organization name. The name is not case sensitive.
`package_version_id` integer Obligatoire Unique identifier of the package version.

Codes d’état de la réponse HTTP pour « Delete package version for an organization »

Code d’état	Description
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Exemples de code pour « Delete package version for an organization »

Exemple de requête

delete/orgs/{org}/packages/{package_type}/{package_name}/versions/{package_version_id}

curl -L \
  -X DELETE \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 204

Restore package version for an organization

Restores a specific package version in an organization.

You can restore a deleted package under the following conditions:

The package was deleted within the last 30 days.
The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

OAuth app tokens and personal access tokens (classic) need the read:packages and write:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Restore package version for an organization »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Jetons d’accès d’installation d’application GitHub

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Restore package version for an organization »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`org` string Obligatoire The organization name. The name is not case sensitive.
`package_version_id` integer Obligatoire Unique identifier of the package version.

Codes d’état de la réponse HTTP pour « Restore package version for an organization »

Code d’état	Description
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Exemples de code pour « Restore package version for an organization »

Exemple de requête

post/orgs/{org}/packages/{package_type}/{package_name}/versions/{package_version_id}/restore

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/orgs/ORG/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID/restore

Response

Status: 204

Get list of conflicting packages during Docker migration for authenticated-user

Lists all packages that are owned by the authenticated user within the user's namespace, and that encountered a conflict during a Docker migration.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint.

Jetons d’accès affinés pour « Get list of conflicting packages during Docker migration for authenticated-user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Codes d’état de la réponse HTTP pour « Get list of conflicting packages during Docker migration for authenticated-user »

Code d’état	Description
`200`	OK

Exemples de code pour « Get list of conflicting packages during Docker migration for authenticated-user »

Exemple de requête

get/user/docker/conflicts

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/user/docker/conflicts

Response

Status: 200

[
  {
    "id": 197,
    "name": "hello_docker",
    "package_type": "container",
    "owner": {
      "login": "octocat",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.octocatusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "User",
      "site_admin": false
    },
    "version_count": 1,
    "visibility": "private",
    "url": "https://api.github.com/orgs/github/packages/container/hello_docker",
    "created_at": "2020-05-19T22:19:11Z",
    "updated_at": "2020-05-19T22:19:11Z",
    "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker"
  },
  {
    "id": 198,
    "name": "goodbye_docker",
    "package_type": "container",
    "owner": {
      "login": "github",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "User",
      "site_admin": false
    },
    "version_count": 2,
    "visibility": "private",
    "url": "https://api.github.com/user/octocat/packages/container/goodbye_docker",
    "created_at": "2020-05-20T22:19:11Z",
    "updated_at": "2020-05-20T22:19:11Z",
    "html_url": "https://github.com/user/octocat/packages/container/package/goodbye_docker"
  }
]

List packages for the authenticated user's namespace

Lists packages owned by the authenticated user within the user's namespace.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « List packages for the authenticated user's namespace »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « List packages for the authenticated user's namespace »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de requête
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`visibility` string The selected visibility of the packages. This parameter is optional and only filters an existing result set. The `internal` visibility is only supported for GitHub Packages registries that allow for granular permissions. For other ecosystems `internal` is synonymous with `private`. For the list of GitHub Packages registries that support granular permissions, see "About permissions for GitHub Packages." Peut être: `public`, `private`, `internal`
`page` integer The page number of the results to fetch. For more information, see "Using pagination in the REST API." Default: `1`
`per_page` integer The number of results per page (max 100). For more information, see "Using pagination in the REST API." Default: `30`

Codes d’état de la réponse HTTP pour « List packages for the authenticated user's namespace »

Code d’état	Description
`200`	OK
`400`	The value of `per_page` multiplied by `page` cannot be greater than 10000.

Exemples de code pour « List packages for the authenticated user's namespace »

Exemple de requête

get/user/packages

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  "https://api.github.com/user/packages?package_type=container"

Response

Status: 200

[
  {
    "id": 197,
    "name": "hello_docker",
    "package_type": "container",
    "owner": {
      "login": "octocat",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.octocatusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "User",
      "site_admin": false
    },
    "version_count": 1,
    "visibility": "private",
    "url": "https://api.github.com/orgs/github/packages/container/hello_docker",
    "created_at": "2020-05-19T22:19:11Z",
    "updated_at": "2020-05-19T22:19:11Z",
    "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker"
  },
  {
    "id": 198,
    "name": "goodbye_docker",
    "package_type": "container",
    "owner": {
      "login": "github",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "User",
      "site_admin": false
    },
    "version_count": 2,
    "visibility": "private",
    "url": "https://api.github.com/user/octocat/packages/container/goodbye_docker",
    "created_at": "2020-05-20T22:19:11Z",
    "updated_at": "2020-05-20T22:19:11Z",
    "html_url": "https://github.com/user/octocat/packages/container/package/goodbye_docker"
  }
]

Get a package for the authenticated user

Gets a specific package for a package owned by the authenticated user.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Get a package for the authenticated user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Get a package for the authenticated user »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.

Codes d’état de la réponse HTTP pour « Get a package for the authenticated user »

Code d’état	Description
`200`	OK

Exemples de code pour « Get a package for the authenticated user »

Exemple de requête

get/user/packages/{package_type}/{package_name}

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 200

{
  "id": 40201,
  "name": "octo-name",
  "package_type": "rubygems",
  "owner": {
    "login": "octocat",
    "id": 209477,
    "node_id": "MDQ6VXNlcjIwOTQ3Nw==",
    "avatar_url": "https://avatars.githubusercontent.com/u/209477?v=4",
    "gravatar_id": "",
    "url": "https://api.github.com/users/octocat",
    "html_url": "https://github.com/octocat",
    "followers_url": "https://api.github.com/users/octocat/followers",
    "following_url": "https://api.github.com/users/octocat/following{/other_user}",
    "gists_url": "https://api.github.com/users/octocat/gists{/gist_id}",
    "starred_url": "https://api.github.com/users/octocat/starred{/owner}{/repo}",
    "subscriptions_url": "https://api.github.com/users/octocat/subscriptions",
    "organizations_url": "https://api.github.com/users/octocat/orgs",
    "repos_url": "https://api.github.com/users/octocat/repos",
    "events_url": "https://api.github.com/users/octocat/events{/privacy}",
    "received_events_url": "https://api.github.com/users/octocat/received_events",
    "type": "User",
    "site_admin": true
  },
  "version_count": 3,
  "visibility": "public",
  "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name",
  "created_at": "2019-10-20T14:17:14Z",
  "updated_at": "2019-10-20T14:17:14Z",
  "repository": {
    "id": 216219492,
    "node_id": "MDEwOlJlcG9zaXRvcnkyMTYyMTk0OTI=",
    "name": "octo-name-repo",
    "full_name": "octocat/octo-name-repo",
    "private": false,
    "owner": {
      "login": "octocat",
      "id": 209477,
      "node_id": "MDQ6VXNlcjIwOTQ3Nw==",
      "avatar_url": "https://avatars.githubusercontent.com/u/209477?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/octocat",
      "followers_url": "https://api.github.com/users/octocat/followers",
      "following_url": "https://api.github.com/users/octocat/following{/other_user}",
      "gists_url": "https://api.github.com/users/octocat/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/octocat/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/octocat/subscriptions",
      "organizations_url": "https://api.github.com/users/octocat/orgs",
      "repos_url": "https://api.github.com/users/octocat/repos",
      "events_url": "https://api.github.com/users/octocat/events{/privacy}",
      "received_events_url": "https://api.github.com/users/octocat/received_events",
      "type": "User",
      "site_admin": true
    },
    "html_url": "https://github.com/octocat/octo-name-repo",
    "description": "Project for octocats",
    "fork": false,
    "url": "https://api.github.com/repos/octocat/octo-name-repo",
    "forks_url": "https://api.github.com/repos/octocat/octo-name-repo/forks",
    "keys_url": "https://api.github.com/repos/octocat/octo-name-repo/keys{/key_id}",
    "collaborators_url": "https://api.github.com/repos/octocat/octo-name-repo/collaborators{/collaborator}",
    "teams_url": "https://api.github.com/repos/octocat/octo-name-repo/teams",
    "hooks_url": "https://api.github.com/repos/octocat/octo-name-repo/hooks",
    "issue_events_url": "https://api.github.com/repos/octocat/octo-name-repo/issues/events{/number}",
    "events_url": "https://api.github.com/repos/octocat/octo-name-repo/events",
    "assignees_url": "https://api.github.com/repos/octocat/octo-name-repo/assignees{/user}",
    "branches_url": "https://api.github.com/repos/octocat/octo-name-repo/branches{/branch}",
    "tags_url": "https://api.github.com/repos/octocat/octo-name-repo/tags",
    "blobs_url": "https://api.github.com/repos/octocat/octo-name-repo/git/blobs{/sha}",
    "git_tags_url": "https://api.github.com/repos/octocat/octo-name-repo/git/tags{/sha}",
    "git_refs_url": "https://api.github.com/repos/octocat/octo-name-repo/git/refs{/sha}",
    "trees_url": "https://api.github.com/repos/octocat/octo-name-repo/git/trees{/sha}",
    "statuses_url": "https://api.github.com/repos/octocat/octo-name-repo/statuses/{sha}",
    "languages_url": "https://api.github.com/repos/octocat/octo-name-repo/languages",
    "stargazers_url": "https://api.github.com/repos/octocat/octo-name-repo/stargazers",
    "contributors_url": "https://api.github.com/repos/octocat/octo-name-repo/contributors",
    "subscribers_url": "https://api.github.com/repos/octocat/octo-name-repo/subscribers",
    "subscription_url": "https://api.github.com/repos/octocat/octo-name-repo/subscription",
    "commits_url": "https://api.github.com/repos/octocat/octo-name-repo/commits{/sha}",
    "git_commits_url": "https://api.github.com/repos/octocat/octo-name-repo/git/commits{/sha}",
    "comments_url": "https://api.github.com/repos/octocat/octo-name-repo/comments{/number}",
    "issue_comment_url": "https://api.github.com/repos/octocat/octo-name-repo/issues/comments{/number}",
    "contents_url": "https://api.github.com/repos/octocat/octo-name-repo/contents/{+path}",
    "compare_url": "https://api.github.com/repos/octocat/octo-name-repo/compare/{base}...{head}",
    "merges_url": "https://api.github.com/repos/octocat/octo-name-repo/merges",
    "archive_url": "https://api.github.com/repos/octocat/octo-name-repo/{archive_format}{/ref}",
    "downloads_url": "https://api.github.com/repos/octocat/octo-name-repo/downloads",
    "issues_url": "https://api.github.com/repos/octocat/octo-name-repo/issues{/number}",
    "pulls_url": "https://api.github.com/repos/octocat/octo-name-repo/pulls{/number}",
    "milestones_url": "https://api.github.com/repos/octocat/octo-name-repo/milestones{/number}",
    "notifications_url": "https://api.github.com/repos/octocat/octo-name-repo/notifications{?since,all,participating}",
    "labels_url": "https://api.github.com/repos/octocat/octo-name-repo/labels{/name}",
    "releases_url": "https://api.github.com/repos/octocat/octo-name-repo/releases{/id}",
    "deployments_url": "https://api.github.com/repos/octocat/octo-name-repo/deployments"
  },
  "html_url": "https://github.com/octocat/octo-name-repo/packages/40201"
}

Delete a package for the authenticated user

Deletes a package owned by the authenticated user. You cannot delete a public package if any version of the package has more than 5,000 downloads. In this scenario, contact GitHub support for further assistance.

OAuth app tokens and personal access tokens (classic) need the read:packages and delete:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Delete a package for the authenticated user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Delete a package for the authenticated user »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.

Codes d’état de la réponse HTTP pour « Delete a package for the authenticated user »

Code d’état	Description
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Exemples de code pour « Delete a package for the authenticated user »

Exemple de requête

delete/user/packages/{package_type}/{package_name}

curl -L \
  -X DELETE \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 204

Restore a package for the authenticated user

Restores a package owned by the authenticated user.

You can restore a deleted package under the following conditions:

The package was deleted within the last 30 days.
The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

OAuth app tokens and personal access tokens (classic) need the read:packages and write:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Restore a package for the authenticated user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Jetons d’accès d’installation d’application GitHub

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Restore a package for the authenticated user »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.

Paramètres de requête
Nom, Type, Description
`token` string package token

Codes d’état de la réponse HTTP pour « Restore a package for the authenticated user »

Code d’état	Description
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Exemples de code pour « Restore a package for the authenticated user »

Exemple de requête

post/user/packages/{package_type}/{package_name}/restore

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/restore

Response

Status: 204

List package versions for a package owned by the authenticated user

Lists package versions for a package owned by the authenticated user.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « List package versions for a package owned by the authenticated user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « List package versions for a package owned by the authenticated user »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.

Paramètres de requête
Nom, Type, Description
`page` integer The page number of the results to fetch. For more information, see "Using pagination in the REST API." Default: `1`
`per_page` integer The number of results per page (max 100). For more information, see "Using pagination in the REST API." Default: `30`
`state` string The state of the package, either active or deleted. Default: `active` Peut être: `active`, `deleted`

Codes d’état de la réponse HTTP pour « List package versions for a package owned by the authenticated user »

Code d’état	Description
`200`	OK
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Exemples de code pour « List package versions for a package owned by the authenticated user »

Exemple de requête

get/user/packages/{package_type}/{package_name}/versions

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/versions

Response

Status: 200

[
  {
    "id": 45763,
    "name": "sha256:08a44bab0bddaddd8837a8b381aebc2e4b933768b981685a9e088360af0d3dd9",
    "url": "https://api.github.com/users/octocat/packages/container/hello_docker/versions/45763",
    "package_html_url": "https://github.com/users/octocat/packages/container/package/hello_docker",
    "created_at": "2020-09-11T21:56:40Z",
    "updated_at": "2021-02-05T21:32:32Z",
    "html_url": "https://github.com/users/octocat/packages/container/hello_docker/45763",
    "metadata": {
      "package_type": "container",
      "container": {
        "tags": [
          "latest"
        ]
      }
    }
  },
  {
    "id": 881,
    "name": "sha256:b3d3e366b55f9a54599220198b3db5da8f53592acbbb7dc7e4e9878762fc5344",
    "url": "https://api.github.com/users/octocat/packages/container/hello_docker/versions/881",
    "package_html_url": "https://github.com/users/octocat/packages/container/package/hello_docker",
    "created_at": "2020-05-21T22:22:20Z",
    "updated_at": "2021-02-05T21:32:32Z",
    "html_url": "https://github.com/users/octocat/packages/container/hello_docker/881",
    "metadata": {
      "package_type": "container",
      "container": {
        "tags": []
      }
    }
  }
]

Get a package version for the authenticated user

Gets a specific package version for a package owned by the authenticated user.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Get a package version for the authenticated user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Get a package version for the authenticated user »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`package_version_id` integer Obligatoire Unique identifier of the package version.

Codes d’état de la réponse HTTP pour « Get a package version for the authenticated user »

Code d’état	Description
`200`	OK

Exemples de code pour « Get a package version for the authenticated user »

Exemple de requête

get/user/packages/{package_type}/{package_name}/versions/{package_version_id}

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 200

{
  "id": 214,
  "name": "sha256:3561f0cff06caccddb99c93bd26e712fcc56a811de0f8ea7a17bb865f30b176a",
  "url": "https://api.github.com/users/octocat/packages/container/hello_docker/versions/214",
  "package_html_url": "https://github.com/users/octocat/packages/container/package/hello_docker",
  "created_at": "2020-05-15T03:46:45Z",
  "updated_at": "2020-05-15T03:46:45Z",
  "html_url": "https://github.com/users/octocat/packages/container/hello_docker/214",
  "metadata": {
    "package_type": "container",
    "container": {
      "tags": [
        "1.13.6"
      ]
    }
  }
}

Delete a package version for the authenticated user

Deletes a specific package version for a package owned by the authenticated user. If the package is public and the package version has more than 5,000 downloads, you cannot delete the package version. In this scenario, contact GitHub support for further assistance.

The authenticated user must have admin permissions in the organization to use this endpoint.

OAuth app tokens and personal access tokens (classic) need the read:packages and delete:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Delete a package version for the authenticated user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Jetons d’accès d’installation d’application GitHub

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Delete a package version for the authenticated user »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`package_version_id` integer Obligatoire Unique identifier of the package version.

Codes d’état de la réponse HTTP pour « Delete a package version for the authenticated user »

Code d’état	Description
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Exemples de code pour « Delete a package version for the authenticated user »

Exemple de requête

delete/user/packages/{package_type}/{package_name}/versions/{package_version_id}

curl -L \
  -X DELETE \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 204

Restore a package version for the authenticated user

Restores a package version owned by the authenticated user.

You can restore a deleted package version under the following conditions:

The package was deleted within the last 30 days.
The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

OAuth app tokens and personal access tokens (classic) need the read:packages and write:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Restore a package version for the authenticated user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Jetons d’accès d’installation d’application GitHub

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Restore a package version for the authenticated user »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`package_version_id` integer Obligatoire Unique identifier of the package version.

Codes d’état de la réponse HTTP pour « Restore a package version for the authenticated user »

Code d’état	Description
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Exemples de code pour « Restore a package version for the authenticated user »

Exemple de requête

post/user/packages/{package_type}/{package_name}/versions/{package_version_id}/restore

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/user/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID/restore

Response

Status: 204

Get list of conflicting packages during Docker migration for user

Lists all packages that are in a specific user's namespace, that the requesting user has access to, and that encountered a conflict during Docker migration.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint.

Jetons d’accès affinés pour « Get list of conflicting packages during Docker migration for user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Ce point de terminaison peut être utilisé sans authentification ou si seules les ressources publiques sont demandées.

Paramètres pour « Get list of conflicting packages during Docker migration for user »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`username` string Obligatoire The handle for the GitHub user account.

Codes d’état de la réponse HTTP pour « Get list of conflicting packages during Docker migration for user »

Code d’état	Description
`200`	OK
`401`	Requires authentication
`403`	Forbidden

Exemples de code pour « Get list of conflicting packages during Docker migration for user »

Exemple de requête

get/users/{username}/docker/conflicts

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/users/USERNAME/docker/conflicts

Response

Status: 200

[
  {
    "id": 197,
    "name": "hello_docker",
    "package_type": "container",
    "owner": {
      "login": "octocat",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.octocatusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "User",
      "site_admin": false
    },
    "version_count": 1,
    "visibility": "private",
    "url": "https://api.github.com/orgs/github/packages/container/hello_docker",
    "created_at": "2020-05-19T22:19:11Z",
    "updated_at": "2020-05-19T22:19:11Z",
    "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker"
  },
  {
    "id": 198,
    "name": "goodbye_docker",
    "package_type": "container",
    "owner": {
      "login": "github",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "User",
      "site_admin": false
    },
    "version_count": 2,
    "visibility": "private",
    "url": "https://api.github.com/user/octocat/packages/container/goodbye_docker",
    "created_at": "2020-05-20T22:19:11Z",
    "updated_at": "2020-05-20T22:19:11Z",
    "html_url": "https://github.com/user/octocat/packages/container/package/goodbye_docker"
  }
]

List packages for a user

Lists all packages in a user's namespace for which the requesting user has access.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « List packages for a user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « List packages for a user »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`username` string Obligatoire The handle for the GitHub user account.

Paramètres de requête
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`visibility` string The selected visibility of the packages. This parameter is optional and only filters an existing result set. The `internal` visibility is only supported for GitHub Packages registries that allow for granular permissions. For other ecosystems `internal` is synonymous with `private`. For the list of GitHub Packages registries that support granular permissions, see "About permissions for GitHub Packages." Peut être: `public`, `private`, `internal`
`page` integer The page number of the results to fetch. For more information, see "Using pagination in the REST API." Default: `1`
`per_page` integer The number of results per page (max 100). For more information, see "Using pagination in the REST API." Default: `30`

Codes d’état de la réponse HTTP pour « List packages for a user »

Code d’état	Description
`200`	OK
`400`	The value of `per_page` multiplied by `page` cannot be greater than 10000.
`401`	Requires authentication
`403`	Forbidden

Exemples de code pour « List packages for a user »

Exemple de requête

get/users/{username}/packages

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  "https://api.github.com/users/USERNAME/packages?package_type=container"

Response

Status: 200

[
  {
    "id": 197,
    "name": "hello_docker",
    "package_type": "container",
    "owner": {
      "login": "octocat",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.octocatusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "User",
      "site_admin": false
    },
    "version_count": 1,
    "visibility": "private",
    "url": "https://api.github.com/orgs/github/packages/container/hello_docker",
    "created_at": "2020-05-19T22:19:11Z",
    "updated_at": "2020-05-19T22:19:11Z",
    "html_url": "https://github.com/orgs/github/packages/container/package/hello_docker"
  },
  {
    "id": 198,
    "name": "goodbye_docker",
    "package_type": "container",
    "owner": {
      "login": "github",
      "id": 9919,
      "node_id": "MDEyOk9yZ2FuaXphdGlvbjk5MTk=",
      "avatar_url": "https://avatars.githubusercontent.com/u/9919?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/github",
      "followers_url": "https://api.github.com/users/github/followers",
      "following_url": "https://api.github.com/users/github/following{/other_user}",
      "gists_url": "https://api.github.com/users/github/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/github/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/github/subscriptions",
      "organizations_url": "https://api.github.com/users/github/orgs",
      "repos_url": "https://api.github.com/users/github/repos",
      "events_url": "https://api.github.com/users/github/events{/privacy}",
      "received_events_url": "https://api.github.com/users/github/received_events",
      "type": "User",
      "site_admin": false
    },
    "version_count": 2,
    "visibility": "private",
    "url": "https://api.github.com/user/octocat/packages/container/goodbye_docker",
    "created_at": "2020-05-20T22:19:11Z",
    "updated_at": "2020-05-20T22:19:11Z",
    "html_url": "https://github.com/user/octocat/packages/container/package/goodbye_docker"
  }
]

Get a package for a user

Gets a specific package metadata for a public package owned by a user.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Get a package for a user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Get a package for a user »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`username` string Obligatoire The handle for the GitHub user account.

Codes d’état de la réponse HTTP pour « Get a package for a user »

Code d’état	Description
`200`	OK

Exemples de code pour « Get a package for a user »

Exemple de requête

get/users/{username}/packages/{package_type}/{package_name}

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 200

{
  "id": 40201,
  "name": "octo-name",
  "package_type": "rubygems",
  "owner": {
    "login": "octocat",
    "id": 209477,
    "node_id": "MDQ6VXNlcjIwOTQ3Nw==",
    "avatar_url": "https://avatars.githubusercontent.com/u/209477?v=4",
    "gravatar_id": "",
    "url": "https://api.github.com/users/octocat",
    "html_url": "https://github.com/octocat",
    "followers_url": "https://api.github.com/users/octocat/followers",
    "following_url": "https://api.github.com/users/octocat/following{/other_user}",
    "gists_url": "https://api.github.com/users/octocat/gists{/gist_id}",
    "starred_url": "https://api.github.com/users/octocat/starred{/owner}{/repo}",
    "subscriptions_url": "https://api.github.com/users/octocat/subscriptions",
    "organizations_url": "https://api.github.com/users/octocat/orgs",
    "repos_url": "https://api.github.com/users/octocat/repos",
    "events_url": "https://api.github.com/users/octocat/events{/privacy}",
    "received_events_url": "https://api.github.com/users/octocat/received_events",
    "type": "User",
    "site_admin": true
  },
  "version_count": 3,
  "visibility": "public",
  "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name",
  "created_at": "2019-10-20T14:17:14Z",
  "updated_at": "2019-10-20T14:17:14Z",
  "repository": {
    "id": 216219492,
    "node_id": "MDEwOlJlcG9zaXRvcnkyMTYyMTk0OTI=",
    "name": "octo-name-repo",
    "full_name": "octocat/octo-name-repo",
    "private": false,
    "owner": {
      "login": "octocat",
      "id": 209477,
      "node_id": "MDQ6VXNlcjIwOTQ3Nw==",
      "avatar_url": "https://avatars.githubusercontent.com/u/209477?v=4",
      "gravatar_id": "",
      "url": "https://api.github.com/users/octocat",
      "html_url": "https://github.com/octocat",
      "followers_url": "https://api.github.com/users/octocat/followers",
      "following_url": "https://api.github.com/users/octocat/following{/other_user}",
      "gists_url": "https://api.github.com/users/octocat/gists{/gist_id}",
      "starred_url": "https://api.github.com/users/octocat/starred{/owner}{/repo}",
      "subscriptions_url": "https://api.github.com/users/octocat/subscriptions",
      "organizations_url": "https://api.github.com/users/octocat/orgs",
      "repos_url": "https://api.github.com/users/octocat/repos",
      "events_url": "https://api.github.com/users/octocat/events{/privacy}",
      "received_events_url": "https://api.github.com/users/octocat/received_events",
      "type": "User",
      "site_admin": true
    },
    "html_url": "https://github.com/octocat/octo-name-repo",
    "description": "Project for octocats",
    "fork": false,
    "url": "https://api.github.com/repos/octocat/octo-name-repo",
    "forks_url": "https://api.github.com/repos/octocat/octo-name-repo/forks",
    "keys_url": "https://api.github.com/repos/octocat/octo-name-repo/keys{/key_id}",
    "collaborators_url": "https://api.github.com/repos/octocat/octo-name-repo/collaborators{/collaborator}",
    "teams_url": "https://api.github.com/repos/octocat/octo-name-repo/teams",
    "hooks_url": "https://api.github.com/repos/octocat/octo-name-repo/hooks",
    "issue_events_url": "https://api.github.com/repos/octocat/octo-name-repo/issues/events{/number}",
    "events_url": "https://api.github.com/repos/octocat/octo-name-repo/events",
    "assignees_url": "https://api.github.com/repos/octocat/octo-name-repo/assignees{/user}",
    "branches_url": "https://api.github.com/repos/octocat/octo-name-repo/branches{/branch}",
    "tags_url": "https://api.github.com/repos/octocat/octo-name-repo/tags",
    "blobs_url": "https://api.github.com/repos/octocat/octo-name-repo/git/blobs{/sha}",
    "git_tags_url": "https://api.github.com/repos/octocat/octo-name-repo/git/tags{/sha}",
    "git_refs_url": "https://api.github.com/repos/octocat/octo-name-repo/git/refs{/sha}",
    "trees_url": "https://api.github.com/repos/octocat/octo-name-repo/git/trees{/sha}",
    "statuses_url": "https://api.github.com/repos/octocat/octo-name-repo/statuses/{sha}",
    "languages_url": "https://api.github.com/repos/octocat/octo-name-repo/languages",
    "stargazers_url": "https://api.github.com/repos/octocat/octo-name-repo/stargazers",
    "contributors_url": "https://api.github.com/repos/octocat/octo-name-repo/contributors",
    "subscribers_url": "https://api.github.com/repos/octocat/octo-name-repo/subscribers",
    "subscription_url": "https://api.github.com/repos/octocat/octo-name-repo/subscription",
    "commits_url": "https://api.github.com/repos/octocat/octo-name-repo/commits{/sha}",
    "git_commits_url": "https://api.github.com/repos/octocat/octo-name-repo/git/commits{/sha}",
    "comments_url": "https://api.github.com/repos/octocat/octo-name-repo/comments{/number}",
    "issue_comment_url": "https://api.github.com/repos/octocat/octo-name-repo/issues/comments{/number}",
    "contents_url": "https://api.github.com/repos/octocat/octo-name-repo/contents/{+path}",
    "compare_url": "https://api.github.com/repos/octocat/octo-name-repo/compare/{base}...{head}",
    "merges_url": "https://api.github.com/repos/octocat/octo-name-repo/merges",
    "archive_url": "https://api.github.com/repos/octocat/octo-name-repo/{archive_format}{/ref}",
    "downloads_url": "https://api.github.com/repos/octocat/octo-name-repo/downloads",
    "issues_url": "https://api.github.com/repos/octocat/octo-name-repo/issues{/number}",
    "pulls_url": "https://api.github.com/repos/octocat/octo-name-repo/pulls{/number}",
    "milestones_url": "https://api.github.com/repos/octocat/octo-name-repo/milestones{/number}",
    "notifications_url": "https://api.github.com/repos/octocat/octo-name-repo/notifications{?since,all,participating}",
    "labels_url": "https://api.github.com/repos/octocat/octo-name-repo/labels{/name}",
    "releases_url": "https://api.github.com/repos/octocat/octo-name-repo/releases{/id}",
    "deployments_url": "https://api.github.com/repos/octocat/octo-name-repo/deployments"
  },
  "html_url": "https://github.com/octocat/octo-name-repo/packages/40201"
}

Delete a package for a user

Deletes an entire package for a user. You cannot delete a public package if any version of the package has more than 5,000 downloads. In this scenario, contact GitHub support for further assistance.

If the package_type belongs to a GitHub Packages registry that supports granular permissions, the authenticated user must have admin permissions to the package. For the list of these registries, see "About permissions for GitHub Packages."

OAuth app tokens and personal access tokens (classic) need the read:packages and delete:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Delete a package for a user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Delete a package for a user »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`username` string Obligatoire The handle for the GitHub user account.

Codes d’état de la réponse HTTP pour « Delete a package for a user »

Code d’état	Description
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Exemples de code pour « Delete a package for a user »

Exemple de requête

delete/users/{username}/packages/{package_type}/{package_name}

curl -L \
  -X DELETE \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME

Response

Status: 204

Restore a package for a user

Restores an entire package for a user.

You can restore a deleted package under the following conditions:

The package was deleted within the last 30 days.
The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

OAuth app tokens and personal access tokens (classic) need the read:packages and write:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Restore a package for a user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Jetons d’accès d’installation d’application GitHub

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Restore a package for a user »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`username` string Obligatoire The handle for the GitHub user account.

Paramètres de requête
Nom, Type, Description
`token` string package token

Codes d’état de la réponse HTTP pour « Restore a package for a user »

Code d’état	Description
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Exemples de code pour « Restore a package for a user »

Exemple de requête

post/users/{username}/packages/{package_type}/{package_name}/restore

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/restore

Response

Status: 204

List package versions for a package owned by a user

Lists package versions for a public package owned by a specified user.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « List package versions for a package owned by a user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « List package versions for a package owned by a user »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`username` string Obligatoire The handle for the GitHub user account.

Codes d’état de la réponse HTTP pour « List package versions for a package owned by a user »

Code d’état	Description
`200`	OK
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Exemples de code pour « List package versions for a package owned by a user »

Exemple de requête

get/users/{username}/packages/{package_type}/{package_name}/versions

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/versions

Response

Status: 200

[
  {
    "id": 3497268,
    "name": "0.3.0",
    "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name/versions/3497268",
    "package_html_url": "https://github.com/octocat/octo-name-repo/packages/40201",
    "license": "MIT",
    "created_at": "2020-08-31T15:22:11Z",
    "updated_at": "2020-08-31T15:22:12Z",
    "description": "Project for octocats",
    "html_url": "https://github.com/octocat/octo-name-repo/packages/40201?version=0.3.0",
    "metadata": {
      "package_type": "rubygems"
    }
  },
  {
    "id": 387039,
    "name": "0.2.0",
    "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name/versions/387039",
    "package_html_url": "https://github.com/octocat/octo-name-repo/packages/40201",
    "license": "MIT",
    "created_at": "2019-12-01T20:49:29Z",
    "updated_at": "2019-12-01T20:49:30Z",
    "description": "Project for octocats",
    "html_url": "https://github.com/octocat/octo-name-repo/packages/40201?version=0.2.0",
    "metadata": {
      "package_type": "rubygems"
    }
  },
  {
    "id": 169770,
    "name": "0.1.0",
    "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name/versions/169770",
    "package_html_url": "https://github.com/octocat/octo-name-repo/packages/40201",
    "license": "MIT",
    "created_at": "2019-10-20T14:17:14Z",
    "updated_at": "2019-10-20T14:17:15Z",
    "html_url": "https://github.com/octocat/octo-name-repo/packages/40201?version=0.1.0",
    "metadata": {
      "package_type": "rubygems"
    }
  }
]

Get a package version for a user

Gets a specific package version for a public package owned by a specified user.

OAuth app tokens and personal access tokens (classic) need the read:packages scope to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Get a package version for a user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Get a package version for a user »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`package_version_id` integer Obligatoire Unique identifier of the package version.
`username` string Obligatoire The handle for the GitHub user account.

Codes d’état de la réponse HTTP pour « Get a package version for a user »

Code d’état	Description
`200`	OK

Exemples de code pour « Get a package version for a user »

Exemple de requête

get/users/{username}/packages/{package_type}/{package_name}/versions/{package_version_id}

curl -L \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 200

{
  "id": 387039,
  "name": "0.2.0",
  "url": "https://api.github.com/users/octocat/packages/rubygems/octo-name/versions/387039",
  "package_html_url": "https://github.com/octocat/octo-name-repo/packages/40201",
  "license": "MIT",
  "created_at": "2019-12-01T20:49:29Z",
  "updated_at": "2019-12-01T20:49:30Z",
  "description": "Octo-name client for Ruby",
  "html_url": "https://github.com/octocat/octo-name-repo/packages/40201?version=0.2.0",
  "metadata": {
    "package_type": "rubygems"
  }
}

Delete package version for a user

Deletes a specific package version for a user. If the package is public and the package version has more than 5,000 downloads, you cannot delete the package version. In this scenario, contact GitHub support for further assistance.

OAuth app tokens and personal access tokens (classic) need the read:packages and delete:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Delete package version for a user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Jetons d’accès d’installation d’application GitHub

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Delete package version for a user »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`username` string Obligatoire The handle for the GitHub user account.
`package_version_id` integer Obligatoire Unique identifier of the package version.

Codes d’état de la réponse HTTP pour « Delete package version for a user »

Code d’état	Description
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Exemples de code pour « Delete package version for a user »

Exemple de requête

delete/users/{username}/packages/{package_type}/{package_name}/versions/{package_version_id}

curl -L \
  -X DELETE \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID

Response

Status: 204

Restore package version for a user

Restores a specific package version for a user.

You can restore a deleted package under the following conditions:

The package was deleted within the last 30 days.
The same package namespace and version is still available and not reused for a new package. If the same package namespace is not available, you will not be able to restore your package. In this scenario, to restore the deleted package, you must delete the new package that uses the deleted package's namespace first.

OAuth app tokens and personal access tokens (classic) need the read:packages and write:packages scopes to use this endpoint. For more information, see "About permissions for GitHub Packages."

Jetons d’accès affinés pour « Restore package version for a user »

Ce point de terminaison fonctionne avec les types de jetons précis suivants:

Jetons d’accès d’installation d’application GitHub

Le jeton précis ne nécessite aucune autorisation.

Paramètres pour « Restore package version for a user »

En-têtes
Nom, Type, Description
`accept` string Setting to `application/vnd.github+json` is recommended.

Paramètres de chemin d’accès
Nom, Type, Description
`package_type` string Obligatoire The type of supported package. Packages in GitHub's Gradle registry have the type `maven`. Docker images pushed to GitHub's Container registry (`ghcr.io`) have the type `container`. You can use the type `docker` to find images that were pushed to GitHub's Docker registry (`docker.pkg.github.com`), even if these have now been migrated to the Container registry. Peut être: `npm`, `maven`, `rubygems`, `docker`, `nuget`, `container`
`package_name` string Obligatoire The name of the package.
`username` string Obligatoire The handle for the GitHub user account.
`package_version_id` integer Obligatoire Unique identifier of the package version.

Codes d’état de la réponse HTTP pour « Restore package version for a user »

Code d’état	Description
`204`	No Content
`401`	Requires authentication
`403`	Forbidden
`404`	Resource not found

Exemples de code pour « Restore package version for a user »

Exemple de requête

post/users/{username}/packages/{package_type}/{package_name}/versions/{package_version_id}/restore

curl -L \
  -X POST \
  -H "Accept: application/vnd.github+json" \
  -H "Authorization: Bearer <YOUR-TOKEN>" \
  -H "X-GitHub-Api-Version: 2022-11-28" \
  https://api.github.com/users/USERNAME/packages/PACKAGE_TYPE/PACKAGE_NAME/versions/PACKAGE_VERSION_ID/restore

Response

Status: 204