Failed to connect to Virtual Smart Card, is the driver installed? #1
Description
The following happens on Server 2019 (build 17763.2931).
- I have installed using
PIVert.exe install - In device manager I can see the "Bix Virtual Smart Card Reader"
- when calling
PIVert.exe mypfx passwordI get the following error:
[!] Failed to connect to Virtual Smart Card, is the driver installed?
When installing the driver again, I get slightly different behaviour:
[=] Connected to Smartcard Event Pipe
[+] Connected Virtal Smart Card Driver
[+] Virtual card inserted
[=] Press ESC to exit, or any other key to remove and reinsert the virtual card?
[=] Unsupported INS ca with CLA 0
[=] Unsupported INS ca with CLA 0
[+] Virtual card removed
[+] Virtual card inserted```
However when I start an RDP connection it doesn't give me access to a smartcard nor is there a smart card visible in device manager (just the smart card reader)
I can see the following in the eventlog:
Could not get device ID for smart card in reader Virtual Smart Card Pipe Reader 0. The return code is 2148532239. (https://www.magnumdb.com/search?q=0x8010000F -> SCARD_E_PROTO_MISMATCH)
and
Smart Card Reader 'Virtual Smart Card Pipe Reader 0' rejected IOCTL SET_PROTOCOL: The request is not supported. If this error persists, your smart card or reader may not be functioning correctly.
Command Header: 03 00 00 00