I have configured my QTH, file locations, SDR, and some UI settings. I added two satellites: Meteor M2-3 and Meteor M2-4. When I press "Update Passes" then Satdump hangs.
Here is the tail of my log:
<...>
[16:16:19 - 08/10/2025] (I) Loading TLEs from /home/gavin/.config/satdump/satdump_tles.txt
[16:16:19 - 08/10/2025] (I) 12792 TLEs loaded!
[16:16:20 - 08/10/2025] (D) Device File Source
[16:16:20 - 08/10/2025] (D) Device Network Source
[16:16:20 - 08/10/2025] (D) Device PlutoSDR IP
[16:16:20 - 08/10/2025] (D) Device Realtek RTL2838UHIDIR #00005203
[16:16:20 - 08/10/2025] (D) Device RTL-TCP
[16:16:20 - 08/10/2025] (D) Device SDR++ Server
[16:16:20 - 08/10/2025] (D) Device SpyServer
[16:16:20 - 08/10/2025] (T) FFT Rate 8333, Samplerate 1000000, Final Size 8192, Skip 141
[16:16:27 - 08/10/2025] (T) Using QTH 50.495712 -116.020903 Alt 813.000000
[16:16:27 - 08/10/2025] (T) Updating elements...

I am using Raspberry Pi 4, PiOS 64 Bit (Kernal 6.12, Debian 13 Trixie), RTL-SDR Blog V3, Satdump V1.2.2
Not sure if it's relevant, but I run the Pi headless and use Remote Desktop to start a remote session on the Pi.

I have also installed Satdump on a Windows 10 computer, configured the same QTH, same satellites, same SDR, and it works as expected.

Probably not relevant, but my issue is similar to #993 except they are trying to schedule geostationary satellites and their log is slightly different.

Thanks,
Gavin